This patch removes __ASSUME_FUTEX_LOCK_PI usage and assumes that
kernel will correctly return if it supports or not
futex_atomic_cmpxchg_inatomic.
Current PI mutex code already has runtime support by calling
prio_inherit_missing and returns ENOTSUP if the futex operation fails
at initialization (it issues a FUTEX_UNLOCK_PI futex operation).
Also, current minimum supported kernel (v3.2) will return ENOSYS if
futex_atomic_cmpxchg_inatomic is not supported in the system:
kernel/futex.c:
2628 long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
2629 u32 __user *uaddr2, u32 val2, u32 val3)
2630 {
2631 int ret = -ENOSYS, cmd = op & FUTEX_CMD_MASK;
[...]
2667 case FUTEX_UNLOCK_PI:
2668 if (futex_cmpxchg_enabled)
2669 ret = futex_unlock_pi(uaddr, flags);
[...]
2686 return ret;
2687 }
The futex_cmpxchg_enabled is initialized by calling cmpxchg_futex_value_locked,
which calls futex_atomic_cmpxchg_inatomic.
For ARM futex_atomic_cmpxchg_inatomic will be either defined (if both
CONFIG_CPU_USE_DOMAINS and CONFIG_SMP are not defined) or use the
default generic implementation that returns ENOSYS.
For m68k is uses the default generic implementation.
For mips futex_atomic_cmpxchg_inatomic will return ENOSYS if cpu has no
'cpu_has_llsc' support (defined by each chip supporte inside kernel).
For sparc, 32-bit kernel will just use default generic implementation,
while 64-bit kernel has support.
Tested on ARM (v3.8 kernel) and x86_64.
* nptl/pthread_mutex_init.c [__ASSUME_FUTEX_LOCK_PI]
(prio_inherit_missing): Remove define.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_FUTEX_LOCK_PI):
Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
When get*ent is called without a preceding set*ent, we need
to set the initial iteration position in get*ent.
Reproducer: Add “services: db files” to /etc/nsswitch.conf, then run
“perl -e getservent”. It will segfault before this change, and exit
silently after it.
Various modf implementations return sNaN (both outputs) for sNaN
input. In fact they contain code to convert sNaN to qNaN for both
outputs, but the way this is done is multiplying by 1.0 (for a wider
range of inputs that includes NaNs as well as numbers with exponent
large enough to ensure that they are integers), and that
multiplication by 1.0 is optimized away by GCC in the absence of
-fsignaling-nans, unlike other operations on NaNs used for this
purpose that are not no-ops for non-sNaN input. This patch arranges
for those files to be built with -fsignaling-nans so that this
existing code is effective as intended.
Tested for x86_64 and x86.
[BZ #20240]
* math/Makefile (CFLAGS-s_modf.c): New variable.
(CFLAGS-s_modff.c): Likewise.
(CFLAGS-s_modfl.c): Likewise.
* math/libm-test.inc (modf_test_data): Add sNaN tests.
The Linux kernel defines __always_inline in stddef.h (283d7573),
and it conflicts with the definition in misc/sys/cdefs.h. To fix
this we undefine it first and always use the glibc definition.
After some discussion in libc-alpha about this POSIX compliance fix, I see
that GLIBC should indeed revert back to previous definition of msghdr and
cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some
reasons:
* The possible issue where the syscalls wrapper add the compatibility
layer is quite limited in scope and range. And kernel current
also add some limits to the values on the internal msghdr and
cmsghdr fields:
- msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns
EMSGSIZE.
- msghdr::msg_controllen larger than INT_MAX returns ENOBUFS.
* There is a small performance hit for recvmsg/sendmsg/recmmsg which
is neglectable, but it is a big hit for sendmmsg since now instead
of calling the syscall for the packed structure, GLIBC is calling
multiple sendmsg. This defeat the very existence of the syscall.
* It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt).
However the fix is incomplete because it does add any runtime check
since libsanitizer currently does not have any facility to intercept
symbols with multiple version [2].
This, along with incorret dlsym/dlvsym return for versioned symbol due
another bug [3], makes hard to interpose versioned symbols.
Also, current approach of fixing GCC PR#71445 leads to half-baked
solutions without versioned symbol interposing.
This patch basically reverts commits 2f0dc39029, 222c2d7f43,
af7f7c7ec8. I decided to not revert abf29edd4a (Adjust
kernel-features.h defaults for recvmsg and sendmsg) mainly because it
does not really address the POSIX compliance original issue and also
adds some cleanups.
Tested on x86, i386, s390, s390x, aarch64, and powerpc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445
[2] https://github.com/google/sanitizers/issues/628
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932
* conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
* nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and
ptw-oldsendmsg.
(CFLAGS-oldrecvmsg.c): Remove rule.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmsg.c): Add rule.
(CFLAGS-sendmsg.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg.
(CFLAGS-recvmsg.c): Remove rule.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-oldrecvmsg.c): Likewise.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmmsg.c): Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert
to kernel defined interfaces.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
(msghdr.__glibc_reserved1): Remove member.
(msghdr.__glibc_reserved2): Likewise.
(cmsghdr.__glibc_reserved1): Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file.
* sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous
version.
* sysdeps/unix/sysv/linux/recvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24):
Remove recvmsg and sendmsg.
* sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file
* sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24
version for {recv,send,recm,sendm}msg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
__malloc_initialize_hook is interposed by application code, so
the usual approach to define a compatibility symbol does not work.
This commit adds a new mechanism based on #pragma GCC poison in
<stdc-predef.h>.
The i386/x86_64 versions of log2l return sNaN for sNaN input. This
patch fixes them to add NaN inputs to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20235]
* sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Add NaN input to
itself.
* sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Likewise.
* math/libm-test.inc (log2_test_data): Add sNaN tests.
The ldbl-128ibm version of log1pl returns sNaN for sNaN input. This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.
Tested for powerpc.
[BZ #20234]
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Add positive
infinity or NaN input to itself.
The ldbl-128ibm version of expm1l returns sNaN for sNaN input. This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.
Tested for powerpc.
[BZ #20233]
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Add NaN input
to itself.
The ldbl-128 version of expm1l returns sNaN for sNaN input. This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.
Tested for mips64.
[BZ #20232]
* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Add NaN input to
itself.
Since x86-64 no longer uses memory copy functions, add dummy memcopy.h
and wordcopy.c to reduce code size. It reduces the size of libc.so by
about 1 KB.
* sysdeps/x86_64/memcopy.h: New file.
* sysdeps/x86_64/wordcopy.c: Likewise.
If C++ headers such as <cstdlib> or <thread> are used, GCC 6
will include /usr/include/stdlib.h (instead of stdlib/stdlib.h
in the glibc source directory), and this turns up as a make
dependency. An implicit rule will kick in and make will try to
install stdlib/stdlib.h as /usr/include/stdlib.h because the
target is out of date.
This commit switches to <stdlib.h> and <pthread.h> instead of
<cstdlib> and <thread>.
If a GETxxBYyy request (for passwd or group) is running in parallel to
an INVALIDATE request (for the same database) then in a particular order
of events the garbage collector is not properly marking all used memory
and fails an assertion:
GETGRBYNAME (root)
Haven't found "root" in group cache!
add new entry "root" of type GETGRBYNAME for group to cache (first)
handle_request: request received (Version = 2) from PID 7413
INVALIDATE (group)
pruning group cache; time 9223372036854775807
considering GETGRBYNAME entry "root", timeout 1456763027
add new entry "0" of type GETGRBYGID for group to cache
remove GETGRBYNAME entry "root"
nscd: mem.c:403: gc: Assertion `next_data == &he_data[db->head->nentries]' failed.
Here the first call to cache_add added the GETGRBYNAME entry, which is
immediately marked for collection by prune_cache. Then the GETGRBYGID
entry is added which shares the data packet with the first entry and
therefore is marked as !first, while the marking look in prune_cache has
already finished. When the garbage collector runs, it only considers
references by entries marked as first, missing the reference by the
secondary entry.
The only way to fix that is to prevent prune_cache from running while the
two related entries are added.
The i386/x86_64 versions of log1pl return sNaN for sNaN input. This
patch fixes them to add a NaN input to itself so that qNaN is returned
in this case.
Tested for x86_64 and x86.
[BZ #20229]
* sysdeps/i386/fpu/s_log1pl.S (__log1pl): Add NaN input to itself.
* sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Likewise.
* math/libm-test.inc (log1p_test_data): Add sNaN tests.
The i386/x86_64 versions of log10l return sNaN for sNaN input. This
patch fixes them to add a NaN input to itself so that qNaN is returned
in this case.
Tested for x86_64 and x86.
[BZ #20228]
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Add NaN input to
itself.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* math/libm-test.inc (log10_test_data): Add sNaN tests.
The i386/x86_64 versions of logl return sNaN for sNaN input. This
patch fixes them to add a NaN input to itself so that qNaN is returned
in this case.
Tested for x86_64 and x86 (including a build for i586 to cover the
non-i686 logl version).
[BZ #20227]
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Add NaN input to
itself.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S (__ieee754_logl): Likewise.
* math/libm-test.inc (log_test_data): Add sNaN tests.
The i386 and x86_64 implementations of expl, exp10l and expm1l (code
shared between the functions) return sNaN for sNaN input. This patch
fixes them to add NaN inputs to themselves so that qNaN is returned in
this case.
Tested for x86_64 and x86.
[BZ #20226]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Add NaN argument to
itself.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise.
* math/libm-test.inc (exp_test_data): Add sNaN tests.
(exp10_test_data): Likewise.
(expm1_test_data): Likewise.
The wrapper implementations of ldexp / scalbn / scalbln
(architecture-independent), and their float / long double variants,
return sNaN for sNaN input. This patch fixes them to add relevant
arguments to themselves so that qNaN is returned in this case.
Tested for x86_64 and x86.
[BZ #20225]
* math/s_ldexp.c (__ldexp): Add non-finite or zero argument to
itself.
* math/s_ldexpf.c (__ldexpf): Likewise.
* math/s_ldexpl.c (__ldexpl): Likewise.
* math/w_scalbln.c (__w_scalbln): Likewise.
* math/w_scalblnf.c (__w_scalblnf): Likewise.
* math/w_scalblnl.c (__w_scalblnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add sNaN tests.
(scalbln_test_data): Likewise.
The i386 version of cbrtl returns sNaN (without raising any
exceptions) for sNaN input. This patch fixes it to add non-finite
arguments to themselves (the code path in question is also reached for
zero arguments, for which adding them to themselves is also harmless),
so that "invalid" is raised and qNaN returned.
Tested for x86_64 and x86.
[BZ #20224]
* sysdeps/i386/fpu/s_cbrtl.S (__cbrtl): Add non-finite or zero
argument to itself.
* math/libm-test.inc (cbrt_test_data): Add sNaN tests.
Since the new SSE2/AVX2 memcpy/memmove are faster than the previous ones,
we can remove the previous SSE2/AVX2 memcpy/memmove and replace them with
the new ones.
No change in IFUNC selection if SSE2 and AVX2 memcpy/memmove weren't used
before. If SSE2 or AVX2 memcpy/memmove were used, the new SSE2 or AVX2
memcpy/memmove optimized with Enhanced REP MOVSB will be used for
processors with ERMS. The new AVX512 memcpy/memmove will be used for
processors with AVX512 which prefer vzeroupper.
Since the new SSE2 memcpy/memmove are faster than the previous default
memcpy/memmove used in libc.a and ld.so, we also remove the previous
default memcpy/memmove and make them the default memcpy/memmove, except
that non-temporal store isn't used in ld.so.
Together, it reduces the size of libc.so by about 6 KB and the size of
ld.so by about 2 KB.
[BZ #19776]
* sysdeps/x86_64/memcpy.S: Make it dummy.
* sysdeps/x86_64/mempcpy.S: Likewise.
* sysdeps/x86_64/memmove.S: New file.
* sysdeps/x86_64/memmove_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove.S: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.S: Likewise.
* sysdeps/x86_64/memmove.c: Removed.
* sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy-sse2-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-avx-unaligned.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S:
Likewise.
* sysdeps/x86_64/multiarch/memmove.c: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.c: Likewise.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Remove
memcpy-sse2-unaligned, memmove-avx-unaligned,
memcpy-avx-unaligned and memmove-sse2-unaligned-erms.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Replace
__memmove_chk_avx512_unaligned_2 with
__memmove_chk_avx512_unaligned. Remove
__memmove_chk_avx_unaligned_2. Replace
__memmove_chk_sse2_unaligned_2 with
__memmove_chk_sse2_unaligned. Remove __memmove_chk_sse2 and
__memmove_avx_unaligned_2. Replace __memmove_avx512_unaligned_2
with __memmove_avx512_unaligned. Replace
__memmove_sse2_unaligned_2 with __memmove_sse2_unaligned.
Remove __memmove_sse2. Replace __memcpy_chk_avx512_unaligned_2
with __memcpy_chk_avx512_unaligned. Remove
__memcpy_chk_avx_unaligned_2. Replace
__memcpy_chk_sse2_unaligned_2 with __memcpy_chk_sse2_unaligned.
Remove __memcpy_chk_sse2. Remove __memcpy_avx_unaligned_2.
Replace __memcpy_avx512_unaligned_2 with
__memcpy_avx512_unaligned. Remove __memcpy_sse2_unaligned_2
and __memcpy_sse2. Replace __mempcpy_chk_avx512_unaligned_2
with __mempcpy_chk_avx512_unaligned. Remove
__mempcpy_chk_avx_unaligned_2. Replace
__mempcpy_chk_sse2_unaligned_2 with
__mempcpy_chk_sse2_unaligned. Remove __mempcpy_chk_sse2.
Replace __mempcpy_avx512_unaligned_2 with
__mempcpy_avx512_unaligned. Remove __mempcpy_avx_unaligned_2.
Replace __mempcpy_sse2_unaligned_2 with
__mempcpy_sse2_unaligned. Remove __mempcpy_sse2.
* sysdeps/x86_64/multiarch/memcpy.S (__new_memcpy): Support
__memcpy_avx512_unaligned_erms and __memcpy_avx512_unaligned.
Use __memcpy_avx_unaligned_erms and __memcpy_sse2_unaligned_erms
if processor has ERMS. Default to __memcpy_sse2_unaligned.
(ENTRY): Removed.
(END): Likewise.
(ENTRY_CHK): Likewise.
(libc_hidden_builtin_def): Likewise.
Don't include ../memcpy.S.
* sysdeps/x86_64/multiarch/memcpy_chk.S (__memcpy_chk): Support
__memcpy_chk_avx512_unaligned_erms and
__memcpy_chk_avx512_unaligned. Use
__memcpy_chk_avx_unaligned_erms and
__memcpy_chk_sse2_unaligned_erms if if processor has ERMS.
Default to __memcpy_chk_sse2_unaligned.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
Change function suffix from unaligned_2 to unaligned.
* sysdeps/x86_64/multiarch/mempcpy.S (__mempcpy): Support
__mempcpy_avx512_unaligned_erms and __mempcpy_avx512_unaligned.
Use __mempcpy_avx_unaligned_erms and __mempcpy_sse2_unaligned_erms
if processor has ERMS. Default to __mempcpy_sse2_unaligned.
(ENTRY): Removed.
(END): Likewise.
(ENTRY_CHK): Likewise.
(libc_hidden_builtin_def): Likewise.
Don't include ../mempcpy.S.
(mempcpy): New. Add a weak alias.
* sysdeps/x86_64/multiarch/mempcpy_chk.S (__mempcpy_chk): Support
__mempcpy_chk_avx512_unaligned_erms and
__mempcpy_chk_avx512_unaligned. Use
__mempcpy_chk_avx_unaligned_erms and
__mempcpy_chk_sse2_unaligned_erms if if processor has ERMS.
Default to __mempcpy_chk_sse2_unaligned.
Since the new SSE2/AVX2 memsets are faster than the previous ones, we
can remove the previous SSE2/AVX2 memsets and replace them with the
new ones. This reduces the size of libc.so by about 900 bytes.
No change in IFUNC selection if SSE2 and AVX2 memsets weren't used
before. If SSE2 or AVX2 memset was used, the new SSE2 or AVX2 memset
optimized with Enhanced REP STOSB will be used for processors with
ERMS. The new AVX512 memset will be used for processors with AVX512
which prefer vzeroupper.
[BZ #19881]
* sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Folded
into ...
* sysdeps/x86_64/memset.S: This.
(__bzero): Removed.
(__memset_tail): Likewise.
(__memset_chk): Likewise.
(memset): Likewise.
(MEMSET_CHK_SYMBOL): New. Define only if MEMSET_SYMBOL isn't
defined.
(MEMSET_SYMBOL): Define only if MEMSET_SYMBOL isn't defined.
* sysdeps/x86_64/multiarch/memset-avx2.S: Removed.
(__memset_zero_constant_len_parameter): Check SHARED instead of
PIC.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Remove
memset-avx2 and memset-sse2-unaligned-erms.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Remove __memset_chk_sse2,
__memset_chk_avx2, __memset_sse2 and __memset_avx2_unaligned.
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
(__bzero): Enabled.
* sysdeps/x86_64/multiarch/memset.S (memset): Replace
__memset_sse2 and __memset_avx2 with __memset_sse2_unaligned
and __memset_avx2_unaligned. Use __memset_sse2_unaligned_erms
or __memset_avx2_unaligned_erms if processor has ERMS. Support
__memset_avx512_unaligned_erms and __memset_avx512_unaligned.
(memset): Removed.
(__memset_chk): Likewise.
(MEMSET_SYMBOL): New.
(libc_hidden_builtin_def): Replace __memset_sse2 with
__memset_sse2_unaligned.
* sysdeps/x86_64/multiarch/memset_chk.S (__memset_chk): Replace
__memset_chk_sse2 and __memset_chk_avx2 with
__memset_chk_sse2_unaligned and __memset_chk_avx2_unaligned_erms.
Use __memset_chk_sse2_unaligned_erms or
__memset_chk_avx2_unaligned_erms if processor has ERMS. Support
__memset_chk_avx512_unaligned_erms and
__memset_chk_avx512_unaligned.
This converts the inclusion macro for each test to use
the format specific macro. In addition, the format
specifier is removed as it is applied via the LIT() macro
which is itself applied when converting the auto inputs and
libm-test.inc into libm-test.c.
Apply the following sed regexes to auto-libm-test-in in order:
s/flt-32/binary32/
s/dbl-64/binary64/
s/ldbl-96-intel/intel96/
s/ldbl-96-m68k/m68k96/
s/ldbl-128ibm/ibm128/
s/ldbl-128/binary128/
and fixup ldbl-96 comment manually.
Use gen-libm-test.pl to generate a list of macros
mapping to libm-test-ulps.h as this simplifies adding new
types without having to modify a growing number of
static headers each time a type is added.
This also removes the final usage of the TEST_(DOUBLE|FLOAT|LDOUBLE)
macros. Thus, they too are removed.
With the exception of the second argument of nexttoward,
any suffixes should be stripped from the test input, and
the macro LIT(x) should be applied to use the correct
suffix for the type being tested.
This adds a new argument type "j" to gen-test-libm.pl
to signify an argument to a test input which does not
require fixup. The test cases of nexttoward have
been updated to use this new feature.
This applies post-processing to all of the test inputs
through gen-libm-test.pl to strip literal suffixes and
apply the LIT(x) macro, with one exception stated above.
This seems a bit cleaner than tossing the macro onto
everything, albeit slightly more obfuscated.
For regular mmapped chunks there are two size fields (hence a reduction
by 2 * SIZE_SZ bytes), but for fake chunks, we only have one size field,
so we need to subtract SIZE_SZ bytes.
This was initially reported as Emacs bug 23726.
The i386 version of atanhl returns sNaN for sNaN input. This patch
fixes it to add NaN arguments to themselves so it returns qNaN in this
case.
Tested for x86_64 and x86.
[BZ #20219]
* sysdeps/i386/fpu/e_atanhl.S (__ieee754_atanhl): Add NaN argument
to itself.
* math/libm-test.inc (atanh_test_data): Add sNaN tests.
The i386 version of asinhl returns sNaN (without raising any
exceptions) for sNaN input. This patch fixes it to add non-finite
arguments to themselves, so that "invalid" is raised and qNaN
returned.
Tested for x86_64 and x86.
[BZ #20218]
* sysdeps/i386/fpu/s_asinhl.S (__asinhl): Add non-finite argument
to itself.
* math/libm-test.inc (asinh_test_data): Add sNaN tests.
Since the FMA4 bit is in COMMON_CPUID_INDEX_80000001 and FMA4 requires
AVX, determine if FMA4 is usable after COMMON_CPUID_INDEX_80000001 is
available and if AVX is usable.
[BZ #20195]
* sysdeps/x86/cpu-features.c (get_common_indeces): Move FMA4
check to ...
(init_cpu_features): Here.
In: https://sourceware.org/glibc/wiki/Synchronizing_Headers
we explain how we synchronize our headers with Linux kernel
headers.
In order to synchronize with the Linux linux/in6.h and
linux/ipv6.h headers we checked for their guard macros and
then defined __USE_KERNEL_IPV6_DEFS and conditionalized code
on this macro.
In upstream kernel 56c176c9 the _UAPI prefix was stripped and
this broke our synchronized headers again. We now need to check
for _LINUX_IN6_H and _IPV6_H, and keep checking the old versions
of the header guard checks for maximum backwards compatibility
with older Linux headers (the history is actually a bit muddled
here and it appears upstream linus kernel broke this 10 months
*before* our fix was ever applied to glibc, but without glibc
testing we didn't notice and distro kernels have their own
testing to fix this).
This patch fixes synchronization with linux/in6.h and
with netinet/in.h.
In C++11 18.5.12 says "Objects shall not be destroyed as a
result of calling quick_exit." In C11 quick_exit is silent
about thread object destruction. Therefore to make glibc
C++ compliant we do not call any thread local destructors.
A new regression test verifies the fix.
I will note that C++11 18.5.3 makes it clear that C++
defines additional requirements for _Exit() to prevent it
from executing destructors.
Given that the point of _Exit() is to terminate the process
immediately it makes sense the C and C++ should line up
and avoid calling destructors.
No failures. New regtest passes.
The dbl-64 version of asin returns sNaN for sNaN arguments. This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20213]
* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Add NaN
argument to itself.
* math/libm-test.inc (asin_test_data): Add sNaN tests.
This patch consolidates all the pwritev{64} implementation for Linux
in only one (sysdeps/unix/sysv/linux/pwritev{64}.c). It also removes the
syscall from the auto-generation using assembly macros.
It was based on previous pwrite/pwrite64 consolidation patch. The new macro
SYSCALL_LL{64} is used to handle the offset argument and alias is created
for __ASSUME_OFF_DIFF_OFF64 in case of pread64.
Checked on x86_64, i386, aarch64, and powerpc64le.
* misc/Makefile (CFLAGS-pwritev.c): New variable: add cancellation
required flags.
(CFLAGS-pwritev64.c): Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/pwritev64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/pwritev.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/pwritev64.: Likwise.
* sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (pwritev): Remove
syscall from auto-generation.
* sysdeps/unix/sysv/linux/pwritev.c: Rewrite implementation.
[WORDSIZE == 64] (pwritev64): Remove macro.
[!PWRITEV] (PWRITEV): Likewise.
[!PWRITEV] (PWRITEV_REPLACEMENT): Likewise.
[!PWRITEV] (PWRITE): Likewise.
[!PWRITEV] (OFF_T): Likewise.
[!__ASSUME_PWRITEV] (PWRITEV_REPLACEMENT): Likewise.
(LO_HI_LONG): Remove macro.
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwritev): Add function.
* sysdeps/unix/sysv/linux/pwritev64.c: Rewrite implementation.
(PWRITEV): Remove macro.
(PWRITEV_REPLACEMENTE): Likewise.
(PWRITE): Likewise.
(OFF_T): Likewise.
(pwritev64): New function.
* nptl/tst-cancel4.c (tf_writev): Add test.
This patch consolidates all the preadv{64} implementation for Linux
in only one (sysdeps/unix/sysv/linux/preadv{64}.c). It also removes the
syscall from the auto-generation using assembly macros.
It was based on previous pread/pread64 consolidation patch. The new macro
SYSCALL_LL{64} is used to handle the offset argument and alias is created
for __ASSUME_OFF_DIFF_OFF64 in case of pread64.
Checked on x86_64, i386, aarch64, and powerpc64le.
* misc/Makefile (CFLAGS-preadv.c): New variable: add cancellation
required flags.
(CFLAGS-preadv64.c): Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/preadv.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/preadv64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/preadv64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/preadv.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/preadv64.: Likwise.
* sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (preadv): Remove
syscall from auto-generation.
* sysdeps/unix/sysv/linux/preadv.c: Rewrite implementation.
[WORDSIZE == 64] (preadv64): Remove macro.
[!PREADV] (PREADV): Likewise.
[!PREADV] (PREADV_REPLACEMENT): Likewise.
[!PREADV] (PREAD): Likewise.
[!PREADV] (OFF_T): Likewise.
[!__ASSUME_PREADV] (PREADV_REPLACEMENT): Likewise.
(LO_HI_LONG): Remove macro.
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (preadv): Add function.
* sysdeps/unix/sysv/linux/preadv64.c: Rewrite implementation.
(PREADV): Remove macro.
(PREADV_REPLACEMENTE): Likewise.
(PREAD): Likewise.
(OFF_T): Likewise.
(preadv64): New function.
* nptl/tst-cancel4.c (tf_preadv): Add test.
The dbl-64 version of acos returns sNaN for sNaN arguments. This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20212]
* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_acos): Add NaN
argument to itself.
* math/libm-test.inc (acos_test_data): Add sNaN tests.
