This patch fixes a warning "tst-unique4lib.cc:17:12: warning: 'b'
defined but not used [-Wunused-variable]". I'm not sure exactly what
aspects of the test are or are not significant for the issue it is
testing for; the patch makes the minimal change of marking the
variable with __attribute__ ((used)).
Tested for x86_64.
* elf/tst-unique4lib.cc (b): Mark with __attribute__ ((used)).
Developers creating development packages must take care
to have their static linker DSO link point to the actual
SONAME file. This allows ldconfig to correctly create
the required links for the SONAME. The behaviour is now
more clearly documented in a code comment added by this
patch.
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
Replace with IS_IN (ldconfig). No change in generated code.
* elf/Makefile (CFLAGS-ldconfig.c): Remove definition of
IS_IN_ldconfig.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Use IS_IN.
* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.h: Likewise.
Make sure that all instances where NOT_IN_libc is defined also defines
IN_MODULE to facilitate removal NOT_IN_libc in future passes.
Verified that the generated code is unchanged on x86_64.
* elf/Makefile (libof-sotruss-lib): Set as extramodules.
Replace with IS_IN and IS_IN_LIB macros instead. This change results
in a change in generated code, because it fixes a subtle bug. The bug
was introduced when systemtap probes were added to lowlevellock.h,
which resulted in stap-probe.h being included in a number of places.
stap-probe.h always defines IN_LIB, which breaks a check in errno.h
and netdb.h since they rely on that macro to decide whether to
implement an internal version of a declaration or an external one.
The components that see a code change due to this are:
iconv_prog
libmemusage.so
libpcprofile.so
libSegFault.so
libutil.so.1
locale
localedef
nscd
All other built components (i.e. libc, libpthread, etc.) remain
unchanged by this on x86_64.
* elf/Makefile (CPPFLAGS-.os): Remove IN_LIB.
* elf/rtld-Rules (rtld-CPPFLAGS): Likewise.
* extra-lib.mk (CPPFLAGS-$(lib)): Likewise.
* include/libc-symbols.h (IS_IN_LIB): New macro.
* include/errno.h: Use IS_IN_LIB instead of IN_LIB.
* include/netdb.h: Likewise.
* include/stap-probe.h: Remove all uses of IN_LIB.
The latest version of the binutils ELF header defines a new set of
dynamic relocations for ILP32 and renames some to make the naming
more uniform.
ChangeLog:
2014-11-21 Will Newton <will.newton@linaro.org>
Andrew Pinski <andrew.pinski@caviumnetworks.com>
* elf/elf.h (R_AARCH64_P32_ABS32, R_AARCH64_P32_COPY,
R_AARCH64_P32_GLOB_DAT, R_AARCH64_P32_JUMP_SLOT,
R_AARCH64_P32_RELATIVE, R_AARCH64_P32_TLS_DTPMOD,
R_AARCH64_P32_TLS_DTPREL, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC, R_AARCH64_P32_IRELATIVE): Define.
(R_AARCH64_TLS_DTPMOD64): Rename to ..
(R_AARCH64_TLS_DTPMOD): This.
(R_AARCH64_TLS_DTPREL64): Rename to ...
(R_AARCH64_TLS_DTPREL): This.
(R_AARCH64_TLS_TPREL64): Rename to ...
(R_AARCH64_TLS_TPREL): This.
* sysdeps/aarch64/dl-machine.h (elf_machine_type_class): Update
R_AARCH64_TLS_DTPMOD64, R_AARCH64_TLS_DTPREL64, and
R_AARCH64_TLS_TPREL64.
(elf_machine_rela): Likewise.
The current scheme to identify which module a translation unit is
built in depends on defining multiple macros IS_IN_* and also defining
NOT_IN_libc if we're building a non-libc module. In addition, there
is an IN_LIB macro that does effectively the same thing, but for
different modules (notably the systemtap probes). This macro scheme
unifies both ideas to use just one macro IN_MODULE and assign it a
value depending on the module it is being built into. If the module
is not defined, it defaults to MODULE_libc.
Patches that follow will replace uses of IS_IN_* variables with the
IS_IN() macro. libc-symbols.h has been converted already to give an
example of how such a transition will look.
Verified that there are no relevant binary changes. One source change
that will crop up repeatedly is that of nscd_stat, since it uses the
build timestamp as a constant in its logic.
* Makeconfig (in-module): Get value of libof set for the
translation unit.
(CPPFLAGS): Use $(in-module).
* Makerules: Don't suffix routine names for nonlib.
* include/libc-modules.h: New file.
* include/libc-symbols.h: Include libc-modules.h
(IS_IN): New macro to replace IS_IN_* macros.
* elf/Makefile: Set libof-* for each routine.
* elf/rtld-Rules: Likewise.
* extra-modules.mk: Likewise.
* iconv/Makefile: Likewise.
* iconvdata/Makefile: Likewise.
* locale/Makefile: Likewise.
* malloc/Makefile: Likewise.
* nss/Makefile: Likewise.
* sysdeps/gnu/Makefile: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile: Likewise.
* sysdeps/unix/sysv/linux/Makefile: Likewise.
* sysdeps/s390/s390-64/Makefile: Likewise.
* nscd/Makefile: Set libof-* for each routine. Set CFLAGS and
CPPFLAGS for nscd instead of nonlib.
For maximum paranoia we run ld.so through the normal set
of tests for all of the shared libraries. This includes
running ld.so through check-localplt, check-textrel, and
check-execstack. While none of these should trigger any
failures given the way ld.so is built, it might possibly
fail if a developer does something wrong. This paranoia
was triggered by a discussion over the use of __strcpy
vs. strcpy [1] and if the symbol could leak and use the
libc.so version.
The check-localplt test fails right away because localplt.data
needs updating for all arches. By default we add 6 new symbols:
__tls_get_addr, __libc_memalign, malloc, calloc, realloc and
free. Other machines like i386, power, and s390 require some
different symbol sets e.g. ___tls_get_addr vs. __tls_get_addr
for i386.
Verified for i386
Verified for x86_64
Verified for ppc32
Verified for ppc64
Verified for ppc64le
Verified for arm
Verified for aarch64
Verified for s390
Verified for s390x
Guessed for alpha
Guessed for ia64
Guessed for m68k
Guessed for microblaze
Guessed for sparc32
Guessed for sparc64
Defaults for sh
Defaults for mips
Defaults for hppa
Defaults for tile
Machine manintainers notified to double check the data
used in localplt.data.
[1] https://sourceware.org/ml/libc-alpha/2014-10/msg00548.html
Completing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch removes the final use - that for _dl_starting_up - replacing it
by rtld_hidden_def / rtld_hidden_proto. Having removed the last use,
the mechanism itself is also removed.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch. (This is not much of a test since this
variable is only defined and used in the !HAVE_INLINED_SYSCALLS case.)
[BZ #14132]
* include/libc-symbols.h (INTUSE): Remove macro.
(INTDEF): Likewise.
(INTVARDEF): Likewise.
(_INTVARDEF): Likewise.
(INTDEF2): Likewise.
(INTVARDEF2): Likewise.
* elf/rtld.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Use
rtld_hidden_def instead of INTVARDEF.
* sysdeps/generic/ldsodefs.h [IS_IN_rtld]
(_dl_starting_up_internal): Remove declaration.
(_dl_starting_up): Use rtld_hidden_proto.
* elf/dl-init.c [!HAVE_INLINED_SYSCALLS] (_dl_starting_up): Remove
declaration.
[!HAVE_INLINED_SYSCALLS] (_dl_starting_up_internal): Likewise.
(_dl_init) [!HAVE_INLINED_SYSCALLS]: Don't use INTUSE with
_dl_starting_up.
* elf/dl-writev.h (_dl_writev): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h [!HAVE_INLINED_SYSCALLS]
(DL_STARTING_UP_DEF): Use __GI__dl_starting_up instead of
_dl_starting_up_internal.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use for _dl_mcount with use of rtld_hidden_def /
rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-profile.c (_dl_mcount): Use rtld_hidden_def instead of
INTDEF.
* sysdeps/generic/ldsodefs.h (_dl_mcount_internal): Remove
declaration.
(_dl_mcount): Use rtld_hidden_proto.
* elf/dl-runtime.c (_dl_profile_fixup): Don't use INTUSE with
_dl_mcount.
* elf/rtld.c (_rtld_global_ro): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch eliminates its use for _dl_init. Since _dl_init was already
declared with hidden visibility, creating a second hidden alias for it
was completely pointless, so this patch replaces all uses of
_dl_init_internal with plain _dl_init instead of using hidden_proto /
hidden_def (which are only needed when you want a hidden alias for a
non-hidden symbol; it's quite possible there are cases where they are
used but don't need to be because the symbol in question is not part
of the public ABI and is only used within a single library, so using
attributes_hidden instead would suffice).
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-init.c (_dl_init): Don't use INTDEF.
* sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead
of _dl_init_internal.
* sysdeps/alpha/dl-machine.h (RTLD_START): Likewise.
* sysdeps/arm/dl-machine.h (RTLD_START): Likewise.
* sysdeps/hppa/dl-machine.h (RTLD_START): Likewise.
* sysdeps/i386/dl-machine.h (RTLD_START): Likewise.
* sysdeps/ia64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/m68k/dl-machine.h (RTLD_START): Likewise.
* sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise.
* sysdeps/mips/dl-machine.h (RTLD_START): Likewise.
* sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sh/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch replaces its use for _dl_argv with rtld_hidden_data_def and
rtld_hidden_proto. Some places in .S files that previously used
_dl_argv_internal or INTUSE(_dl_argv) now use __GI__dl_argv directly
(there are plenty of existing examples of such direct use of __GI_*).
A single place in rtld.c previously used _dl_argv without INTUSE,
apparently accidentally, while the rtld_hidden_proto mechanism avoids
such accidential omissions. As a consequence, this patch *does*
change the contents of stripped ld.so. However, the installed
stripped shared libraries are identical to those you get if instead of
this patch you change that single _dl_argv use to use INTUSE, without
any other changes.
Tested for x86_64 (testsuite as well as comparison of installed
stripped shared libraries as described above).
[BZ #14132]
* sysdeps/generic/ldsodefs.h (_dl_argv): Use rtld_hidden_proto.
[IS_IN_rtld] (_dl_argv_internal): Do not declare.
(rtld_progname): Make macro definition unconditional.
* elf/rtld.c (_dl_argv): Use rtld_hidden_data_def instead of
INTDEF.
(dlmopen_doit): Do not use INTUSE with _dl_argv.
(dl_main): Likewise.
* elf/dl-sysdep.c (_dl_sysdep_start): Likewise.
* sysdeps/alpha/dl-machine.h (RTLD_START): Use __GI__dl_argv
instead of _dl_argv_internal.
* sysdeps/powerpc/powerpc32/dl-start.S (_dl_start_user): Use
__GI__dl_argv instead of INTUSE(_dl_argv).
* sysdeps/powerpc/powerpc64/dl-machine.h (RTLD_START): Use
__GI__dl_argv instead of _dl_argv_internal.
This hook can be used to perform additional compatibility checks
between shared libraries by inspecting custom program header
information.
* elf/dl-machine-reject-phdr.h: New file.
* elf/dl-load.c: #include that.
(open_verify): Call elf_machine_reject_phdr_p and ignore the file
if that returned true.
During a refactoring pass several repeated blocks of code in dl-load.c
were turned into a call to a local function named local_strdup. There
is no need for local_strdup, and the routines should instead call
__strdup. This change does just that. We call the internal symbol
__strdup because calling strdup is unsafe. The user might be
using a standard that doesn't include strdup and may have defined this
symbol in their application. During a static link we might reference
the user defined symbol and crash if it doesn't implement a standards
conforming strdup. The resulting code is simpler to understand, and
makes it easier to debug.
No regressions on x86_64.
2014-10-28 Carlos O'Donell <carlos@redhat.com>
* dl-load.c (local_strdup): Remove.
(expand_dynamic_string_token): Use __strdup.
(decompose_rpath): Likewise.
(_dl_map_object): Likewise.
Continuing the removal of the obsolete INTDEF / INTVARDEF / INTUSE
mechanism, this patch replaces its use for __libc_enable_secure with
the use of rtld_hidden_data_def and rtld_hidden_proto.
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-sysdep.c (__libc_enable_secure): Use rtld_hidden_data_def
instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* sysdeps/mach/hurd/dl-sysdep.c (__libc_enable_secure): Use
rtld_hidden_data_def instead of INTVARDEF.
(_dl_sysdep_start): Do not use INTUSE with __libc_enable_secure.
* elf/dl-deps.c (expand_dst): Likewise.
* elf/dl-load.c (_dl_dst_count): Likewise.
(_dl_dst_substitute): Likewise.
(decompose_rpath): Likewise.
(_dl_init_paths): Likewise.
(open_path): Likewise.
(_dl_map_object): Likewise.
* elf/rtld.c (dl_main): Likewise.
(process_dl_audit): Likewise.
(process_envvars): Likewise.
* include/unistd.h [IS_IN_rtld] (__libc_enable_secure_internal):
Remove declaration.
(__libc_enable_secure): Use rtld_hidden_proto.
During auditing or profiling modes the dynamic loader
builds a cache of the relocated PLT entries in order
to reuse them when called again through the same PLT
entry. This way the PLT entry is never completed and
the call into the resolver always results in profiling
or auditing code running.
The problem is that the PLT relocation cache size
is not computed correctly. The size of the cache
should be "Size of a relocation result structure"
x "Number of PLT-related relocations". Instead the
code erroneously computes "Size of a relocation
result" x "Number of bytes worth of PLT-related
relocations". I can only assume this was a mistake
in the understanding of the value of DT_PLTRELSZ
which is the number of bytes of PLT-related relocs.
We do have a DT_RELACOUNT entry, which is a count
for dynamic relative relocs, but we have no
DT_PLTRELCOUNT and thus we need to compute it.
This patch corrects the computation of the size of the
relocation table used by the glibc profiling code.
For more details see:
https://sourceware.org/ml/libc-alpha/2014-09/msg00513.html
[BZ #17411]
* elf/dl-reloc.c (_dl_relocate_object): Allocate correct amount for
l_reloc_result.
Replace it with including an auto-generated linker-runtime.h.
Build-tested on x86_64 and found that there was no change in the
generated code.
* elf/Makefile (CFLAGS-interp.c): Remove.
($(elf-objpfx)runtime-linker.h): Generate header with linker
path string.
* elf/interp.c: Include generated runtime-linker.h
Barring libc.so and libdl.so, none of the libraries have any entry
points, so it is pointless to add a .interp section for them. The
libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that
file as well.
Build tested for x86_64, ppc64 and s390x. I have not moved
CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it
completely in a follow-up patch.
Siddhesh
* Makerules (lib%.so): Don't include $(+interp) in
prerequisites.
* elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc.
* dlfcn/eval.c: Remove file.
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
Convert all uses of __builtin_expect to __glibc_likely and
__glibc_unlikely. Most of these are trivial boolean expressions
but a few were not. In particular the use of __builtin_expect in
the switch expression in do_lookup_x has been removed. Verified
that there are no code changes on x86_64 and ARM aside from line
numbers.
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c: Use __glibc_unlikely and __glibc_likely
rather than __builtin_expect.
undefined_msg is only used once contrary to the comment.
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c (undefined_msg): Remove variable.
(_dl_lookup_symbol_x): Replace undefined_msg with string
literal.
Move handling of STB_GNU_UNIQUE symbols to a separate function
from do_lookup_x in order to make the code more readable.
The new function gets inlined with gcc 4.8 on ARM and the
do_lookup_x code becomes a few bytes smaller.
ChangeLog:
2014-06-23 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c (do_lookup_unique): New function.
(do_lookup_x): Move STB_GNU_UNIQUE handling code
to a separate function.
The glibc makefiles have a standard variable, $(rtld-prefix), to run
the dynamic linker with a default --library-path option; this is used
as the basis of lots of other variables for running programs compiled
with the newly built library.
A few places however use $(elf-objpfx)ld.so or
$(elf-objpfx)${rtld-installed-name} directly, with such a
--library-path option. This patch makes such places use
$(rtld-prefix) instead. I'm not aware of any significance in these
cases to the choice of ld.so or ${rtld-installed-name} when running
the dynamic linker, or to whether $(patsubst
%,:%,$(sysdep-library-path)) is included in the library-path as it is
in $(rtld-prefix) and just one of the places being changed.
Tested x86_64.
* elf/Makefile ($(objpfx)tst-unused-dep.out): Use $(rtld-prefix).
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(rtld-prefix).
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
This patch fixes the tst-tlsmod[5/6].so build in system that uses
-Wl,--as-needed as default in linker option. Without this option
the testing shared library that does not have libc.so in DT_NEEDED
and the tst-tls9-static fails in architecture that use the
./sysdeps/unix/sysv/linux/<arch>/dl-static.c trick.
The nested function referred to has gone away so remove the
comment. Also move the variable declaration down to where other
variables of a similar lifetime are declared for clarity.
2014-04-03 Will Newton <will.newton@linaro.org>
* elf/dl-lookup.c (do_lookup_x): Remove comment
referring to nested function and move variable
declarations down to before first use.
An application that erroneously tries to repeatedly dlopen("a.out", ...)
may hit assertion failure:
Inconsistency detected by ld.so: dl-tls.c: 474: _dl_allocate_tls_init:
Assertion `listp != ((void *)0)' failed!
dlopen() actually fails with "./a.out: cannot dynamically load executable",
but it does so after incrementing dl_tls_max_dtv_idx.
Once we run out of TLS_SLOTINFO_SURPLUS (62), we exit with above assertion
failure.
2014-03-24 Paul Pluzhnikov <ppluzhnikov@google.com>
[BZ #16634]
* elf/dl-load.c (open_verify): Add mode parameter.
Error early when ET_EXEC and mode does not have __RTLD_OPENEXEC.
(open_path): Change from boolean 'secure' to complete flag 'mode'
(_dl_map_object): Adjust.
* elf/Makefile (tests): Add tst-dlopen-aout.
* elf/tst-dlopen-aout.c: New test.
