As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All the stack lists are now in _rtld_global, so it is possible
to change stack permissions directly from there, instead of
calling into libpthread to do the change.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Permissions of the cached stacks may have to be updated if an object
is loaded that requires executable stacks, so the dynamic loader
needs to know about these cached stacks.
The move of in_flight_stack and stack_cache_actsize is a requirement for
merging __reclaim_stacks into the fork implementation in libc.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The stack list is available in ld.so since commit
1daccf403b ("nptl: Move stack list
variables into _rtld_global"), so it's possible to walk the stack
list directly in ld.so and perform the initialization there.
This eliminates an unprotected function pointer from _rtld_global
and reduces the libpthread initialization code.
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
Extern symbol access in position independent code usually involves GOT
indirection which needs RELATIVE reloc in a static linked PIE. (On
some targets this is avoided e.g. because the linker can relax a GOT
access to a pc-relative access, but this is not generally true.) Code
that runs before static PIE self relocation must avoid relying on
dynamic relocations which can be ensured by using hidden visibility.
However we cannot just make all symbols hidden:
On i386, all calls to IFUNC functions must go through PLT and calls to
hidden functions CANNOT go through PLT in PIE since EBX used in PIE PLT
may not be set up for local calls to hidden IFUNC functions.
This patch aims to make symbol references hidden in code that is used
before and by _dl_relocate_static_pie when building a static PIE libc.
Note: for an object that is used in the startup code, its references
and definition may not have consistent visibility: it is only forced
hidden in the startup code.
This is needed for fixing bug 27072.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Set the default _dl_sysinfo in _dl_aux_init to avoid RELATIVE relocation
in static PIE.
This is needed for fixing bug 27072 on x86.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
This hacks non-power-set processing into _dl_important_hwcaps.
Once the legacy hwcaps handling goes away, the subdirectory
handling needs to be reworked, but it is premature to do this
while both approaches are still supported.
ld.so supports two new arguments, --glibc-hwcaps-prepend and
--glibc-hwcaps-mask. Each accepts a colon-separated list of
glibc-hwcaps subdirectory names. The prepend option adds additional
subdirectories that are searched first, in the specified order. The
mask option restricts the automatically selected subdirectories to
those listed in the option argument. For example, on systems where
/usr/lib64 is on the library search path,
--glibc-hwcaps-prepend=valgrind:debug causes the dynamic loader to
search the directories /usr/lib64/glibc-hwcaps/valgrind and
/usr/lib64/glibc-hwcaps/debug just before /usr/lib64 is searched.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 10.0 enabled -fno-common by default and this started to point that
__cache_line_size had been implemented in 2 different places: loader and
libc.
In order to avoid this duplication, the libc variable has been removed
and the loader variable is moved to rtld_global_ro.
File sysdeps/unix/sysv/linux/powerpc/dl-auxv.h has been added in order
to reuse code for both static and dynamic linking scenarios.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The code is similar to the one at elf/dl-reloc.c, where it checks for
the l_relro_size from the link_map (obtained from PT_GNU_RELRO header
from program headers) and calls_dl_protected_relro.
For testing I will use the ones proposed by Florian's patch
'elf: Add tests for working RELRO protection' [1].
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
aarch64-linux-gnu, s390x-linux-gnu, and sparc64-linux-gnu. I also
check with --enable-static pie on x86_64-linux-gnu, i686-linux-gnu,
and aarch64-linux-gnu which seems the only architectures where
static PIE is actually working (as per 9d7a3741c9, on
arm-linux-gnueabihf, powerpc64{le}-linux-gnu, and s390x-linux-gnu
I am seeing runtime issues not related to my patch).
[1] https://sourceware.org/ml/libc-alpha/2019-10/msg00059.html
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
To support Intel Control-flow Enforcement Technology (CET) run-time
control:
1. An architecture specific field in the writable ld.so namespace is
needed to indicate if CET features are enabled at run-time.
2. An architecture specific field in struct link_map is needed if
CET features are enabled in an ELF module.
This patch adds dl-procruntime.c to the writable ld.so namespace and
link_map.h to struct link_map.
Tested with build-many-glibcs.py.
* elf/dl-support.c: Include <dl-procruntime.c>.
* include/link.h: Include <link_map.h>.
* sysdeps/generic/dl-procruntime.c: New file.
* sysdeps/generic/link_map.h: Likewise.
* sysdeps/generic/ldsodefs.h: Include <dl-procruntime.c> in
the writable ld.so namespace.
Drop _dl_hwcap_mask when building with tunables. This completes the
transition of hwcap_mask reading from _dl_hwcap_mask to tunables.
* elf/dl-hwcaps.h: New file.
* elf/dl-hwcaps.c: Include it.
(_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update
glibc.tune.hwcap_mask.
* elf/dl-cache.c: Include dl-hwcaps.h.
(_dl_load_cache_lookup)[HAVE_TUNABLES]: Read
glibc.tune.hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
* elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
(process_envvars)[HAVE_TUNABLES]: Likewise.
* sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Don't
initialize dl_hwcap_mask when tunables are enabled.
The tunables framework allows us to uniformly manage and expose global
variables inside glibc as switches to users. tunables/README has
instructions for glibc developers to add new tunables.
Tunables support can be enabled by passing the --enable-tunables
configure flag to the configure script. This patch only adds a
framework and does not pose any limitations on how tunable values are
read from the user. It also adds environment variables used in malloc
behaviour tweaking to the tunables framework as a PoC of the
compatibility interface.
* manual/install.texi: Add --enable-tunables option.
* INSTALL: Regenerate.
* README.tunables: New file.
* Makeconfig (CPPFLAGS): Define TOP_NAMESPACE.
(before-compile): Generate dl-tunable-list.h early.
* config.h.in: Add HAVE_TUNABLES.
* config.make.in: Add have-tunables.
* configure.ac: Add --enable-tunables option.
* configure: Regenerate.
* csu/init-first.c (__libc_init_first): Move
__libc_init_secure earlier...
* csu/init-first.c (LIBC_START_MAIN):... to here.
Include dl-tunables.h, libc-internal.h.
(LIBC_START_MAIN) [!SHARED]: Initialize tunables for static
binaries.
* elf/Makefile (dl-routines): Add dl-tunables.
* elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE
namespace.
* elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_
only when !HAVE_TUNABLES.
* elf/rtld.c (process_envvars): Likewise.
* elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h
(_dl_sysdep_start): Call __tunables_init.
* elf/dl-tunable-types.h: New file.
* elf/dl-tunables.c: New file.
* elf/dl-tunables.h: New file.
* elf/dl-tunables.list: New file.
* malloc/tst-malloc-usable-static.c: New test case.
* malloc/Makefile (tests-static): Add it.
* malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h.
Define TUNABLE_NAMESPACE.
(DL_TUNABLE_CALLBACK (set_mallopt_check)): New function.
(DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define
callback functions.
(ptmalloc_init): Set tunable values.
* scripts/gen-tunables.awk: New file.
* sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h.
(_dl_sysdep_start): Call __tunables_init.
Added AT_PLATFORM to _dl_aux_init () function to keep it in sync with
_dl_sysdep_start ().
* elf/dl-support.c (_dl_aux_init): Added AT_PLATFORM to the case
statement.
Fix a regression introduced with commit 0d23a5c1 [Static dlopen
correction fallout fixes] that caused the default library search path to
be ignored for modules loaded with dlopen from static executables.
[BZ #17250]
* elf/dl-support.c (_dl_main_map): Don't initialize l_flags_1
member.
Fixes to address issues from BZ #15022 resolution, as follows:
* TLS updates to csu/libc-tls.c -- we now have a proper main map, so
there's no longer a need to create a separate fake one to keep TLS
structures,
* random updates to elf/dl-close.c -- LM_ID_BASE is now a valid name
space ID for static executables as well, so assert that we don't
unload the main map. Similarly dl_nns isn't supposed to be 0 for
static executables anymore,
* actual BZ #16046 fix to elf/dl-iteratephdr.c -- the dl_iterate_phdr
special function for static executables isn't needed anymore, provided
that l_phdr and l_phnum members of the main map have been properly
initialized (done in _dl_non_dynamic_init in elf/dl-support.c now),
* ld.so.cache loader update to elf/dl-load.c --
GL(dl_ns)[LM_ID_BASE]._ns_loaded is now always initialized in static
executables so can become the fallback loader map to check for
DF_1_NODEFLIB, provided that the l_flags_1 member of the main map has
been properly initialized (done in elf/dl-support.c now); this also
ensures previous semantics elsewhere in elf/dl-load.c,
* matching updates to elf/dl-support.c -- to complement the two fixes
above.
Long ago static startup did not parse the auxiliary vector and therefore
could not get at any `AT_FPUCW' tag to check whether upon FPU context
allocation the kernel would use a FPU control word setting different to
that provided by the `__fpu_control' variable. Static startup therefore
always initialized the FPU control word, forcing immediate FPU context
allocation even for binaries that otherwise never used the FPU.
As from GIT commit f8f900ecb9 static
startup supports parsing the auxiliary vector, so now it can avoid
explicit initialization of the FPU control word, just as can dynamic
startup, in the usual case where the setting written to the FPU control
word would be the same as the kernel uses. This defers FPU context
allocation until the binary itself actually pokes at the FPU.
Note that the `AT_FPUCW' tag is usually absent from the auxiliary vector
in which case _FPU_DEFAULT is assumed to be the kernel default.
This change creates a link map in static executables to serve as the
global search list for dlopen. It fixes a problem with the inability
to access the global symbol object and a crash on an attempt to map a
DSO into the global scope. Some code that has become dead after the
addition of this link map is removed too and test cases are provided.
It may sometimes be desirable to make the dynamic linker only pick up
libraries from the library path and rpath and not look at the
ld.so.cache that ldconfig generates. An example of such a use case is
the glibc testsuite where the dynamic linker must not be influenced by
any external paths or caches.
This change adds a new option --inhibit-ldcache that when used, tells
the dynamic linker to not use ld.so.cache even if it is available.
