union pthread_attr_transparent has always the correct size, even if
pthread_attr_t has padding that is not present in struct pthread_attr.
This should not result in an observable behavioral change. The
existing code appears to have been correct, but it was brittle because
it was not clear which functions were allowed to write to an entire
pthread_attr_t argument (e.g., by copying it).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This allows to reuse the storage after calling pthread_cond_destroy.
* sysdeps/htl/bits/types/struct___pthread_cond.h (__pthread_cond):
Replace unused struct __pthread_condimpl *__impl field with unsigned int
__wrefs.
(__PTHREAD_COND_INITIALIZER): Update accordingly.
* sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal):
Register as waiter in __wrefs field. On unregistering, wake any pending
pthread_cond_destroy.
* sysdeps/htl/pt-cond-destroy.c (__pthread_cond_destroy): Register wake
request in __wrefs.
* nptl/Makefile (tests): Move tst-cond20 tst-cond21 to...
* sysdeps/pthread/Makefile (tests): ... here.
* nptl/tst-cond20.c nptl/tst-cond21.c: Move to...
* sysdeps/pthread/tst-cond20.c sysdeps/pthread/tst-cond21.c: ... here.
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Also add the private type union pthread_attr_transparent, to reduce
the amount of casting that is required.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
pthread_attr_destroy needs to be a weak alias to avoid future
linknamespace failures.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Use __getline instead of __getdelim to avoid a localplt failure.
Likewise for __getrlimit/getrlimit.
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_getattr_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py --only-linux pthread_getattr_np
The private export of __pthread_getaffinity_np is no longer needed, but
the hidden alias still necessary so that the symbol can be exported with
versioned_symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_getaffinity_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py pthread_getaffinity_np
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
The symbol did not previously exist in libc, so a new GLIBC_2.32
symbol is needed, to get correct dependency for binaries which
use the symbol but no longer link against libpthread.
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_attr_setaffinity_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py pthread_attr_setaffinity_np
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The stubs for pthread_getaffinity_np, pthread_getname_np,
pthread_setaffinity_np, pthread_setname_np are replaced, and corresponding
tests are moved.
After the removal of the NaCl port, nptl is Linux-specific, and the stubs
are no longer needed. This effectively reverts commit
c76d1ff514 ("NPTL: Add stubs for Linux-only
extension functions.").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is a race between __nptl_setxid and exiting detached thread, which
causes a deadlock on stack_cache_lock. The deadlock happens in this
state:
T1: setgroups -> __nptl_setxid (holding stack_cache_lock, waiting on cmdp->cntr == 0)
T2 (detached, exiting): start_thread -> __deallocate_stack (waiting on stack_cache_lock)
more threads waiting on stack_cache_lock in pthread_create
For non-detached threads, start_thread waits for its own setxid handler to
finish before exiting. Do this for detached threads as well.
New threads inherit the signal mask from the current thread. This
means that signal handlers can run on the newly created thread
immediately after the kernel has created the userspace thread, even
before glibc has initialized the TCB. Consequently, new threads can
observe uninitialized ctype data, among other things.
To address this, block all signals before starting the thread, and
pass the original signal mask to the start routine wrapper. On the
new thread, first perform all thread initialization, and then unblock
signals.
The cost of doing this is two rt_sigprocmask system calls on the old
thread, and one rt_sigprocmask system call on the new thread. (If
there was a way to clone a new thread with a signals disabled, this
could be brought down to one system call each.) The thread descriptor
increases in size, too, and sigset_t is fairly large. This increase
could be brought down by reusing space the in the descriptor which is
not needed before running user code, or by switching to an internal
sigset_t definition which only covers the signals supported by the
kernel definition. (Part of the thread descriptor size increase is
already offset by reduced stack usage in the thread start wrapper
routine after this commit.)
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The upper bits of the sigset_t s not fully initialized in the signal
mask calls that return information from kernel (sigprocmask,
sigpending, and pthread_sigmask), since the exported sigset_t size
(1024 bits) is larger than Linux support one (64 or 128 bits).
It might make sigisemptyset/sigorset/sigandset fail if the mask
is filled prior the call.
This patch changes the internal signal function to handle up to
supported Linux signal number (_NSIG), the remaining bits are
untouched.
Checked on x86_64-linux-gnu and i686-linux-gnu.
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
A new symbol version is added on libc to force loading failure
instead of lazy binding one for newly binaries with old loaders.
Checked with a build against all affected ABIs.
Due to the built-in tables, __NR_set_robust_list is always defined
(although it may not be available at run time).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is necessary to export __pthread_cond_init from libc because
the C11 condition variable needs it and is still left in libpthread.
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is necessary to export __pthread_cond_destroy from libc because
the C11 condition variable needs it and is still left in libpthread.
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This will make it easier to review changes which move implementations
from libpthread to libc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The behavior of the signal mask on threads created by timer_create
for SIGEV_THREAD timers are implementation-defined and glibc explicit
unblocks all signals before calling the user-defined function.
This behavior, although not incorrect standard-wise, opens a race if a
program using a blocked rt-signal plus sigwaitinfo (and without an
installed signal handler for the rt-signal) receives a signal while
executing the used-defined function for SIGEV_THREAD.
A better alternative discussed in bug report is to rather block all
signals (besides the internal ones not available to application
usage).
This patch fixes this issue by only unblocking SIGSETXID (used on
set*uid function) and SIGCANCEL (used for thread cancellation).
Checked on x86_64-linux-gnu and i686-linux-gnu.
This supersedes the init_array sysdeps directory. It allows us to
check for ELF_INITFINI in both C and assembler code, and skip DT_INIT
and DT_FINI processing completely on newer architectures.
A new header file is needed because <dl-machine.h> is incompatible
with assembler code. <sysdep.h> is compatible with assembler code,
but it cannot be included in all assembler files because on some
architectures, it redefines register names, and some assembler files
conflict with that.
<elf-initfini.h> is replicated for legacy architectures which need
DT_INIT/DT_FINI support. New architectures follow the generic default
and disable it.
With all Linux ABIs using the expected Linux kABI to indicate
syscalls errors, the INTERNAL_SYSCALL_DECL is an empty declaration
on all ports.
This patch removes the 'err' argument on INTERNAL_SYSCALL* macro
and remove the INTERNAL_SYSCALL_DECL usage.
Checked with a build against all affected ABIs.
so it gets shared by nptl and htl. Also add htl versions of thrd_current and
thrd_yield.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
See https://bugzilla.redhat.com/show_bug.cgi?id=1653942
This test depends on the kernel's assignment of memory regions, but
running under ld.so explicitly changes those assignments, sometimes
sufficiently to cause the test to fail (esp with address space
randomization).
The easiest way to "fix" the test, is to run it the way the user would
- without ld.so. Running it in a container does that.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
This patch adds the missing __libpthread_version_placeholder for
GLIBC_2.2.6 version from the nanosleep implementation move from
libpthread to libc (79a547b162).
It also fixes the wrong compat symbol definitions added by changing
back the version used on vfork check and remove the
__libpthread_version_placeholder added on some ABI (4f4bb489e0).
The __libpthread_version_placeholder is also refactored to make it
simpler to add new compat_symbols by adding a new macro
compat_symbol_unique which uses the compiler extension __COUNTER__
to generate unique strong alias to be used with compat_symbol.
Checked with a updated-abi on the all affected abis of the nanosleep
move.
Change-Id: I347a4dbdc931bb42b359456932dd1e17aa4d4078
Since commit a3cc4f48e9 ("Remove
--as-needed configure test."), --as-needed support is no longer
optional.
The macros are not much shorter and do not provide documentary
value, either, so this commit removes them.
This patch adds a new generic __pthread_rwlock_arch_t definition meant
to be used by new ports. Its layout mimics the current usage on some
64 bits ports and it allows some ports to use the generic definition.
The arch __pthread_rwlock_arch_t definition is moved from
pthreadtypes-arch.h to another arch-specific header (struct_rwlock.h).
Also the static intialization macro for pthread_rwlock_t is set to use
an arch defined on (__PTHREAD_RWLOCK_INITIALIZER) which simplifies its
implementation.
The default pthread_rwlock_t layout differs from current ports with:
1. Internal layout is the same for 32 bits and 64 bits.
2. Internal flag is an unsigned short so it should not required
additional padding to align for word boundary (if it is the case
for the ABI).
Checked with a build on affected abis.
Change-Id: I776a6a986c23199929d28a3dcd30272db21cd1d0
The current way of defining the common mutex definition for POSIX and
C11 on pthreadtypes-arch.h (added by commit 06be6368da) is
not really the best options for newer ports. It requires define some
misleading flags that should be always defined as 0
(__PTHREAD_COMPAT_PADDING_MID and __PTHREAD_COMPAT_PADDING_END), it
exposes options used solely for linuxthreads compat mode
(__PTHREAD_MUTEX_USE_UNION and __PTHREAD_MUTEX_NUSERS_AFTER_KIND), and
requires newer ports to explicit define them (adding more boilerplate
code).
This patch adds a new default __pthread_mutex_s definition meant to
be used by newer ports. Its layout mimics the current usage on both
32 and 64 bits ports and it allows most ports to use the generic
definition. Only ports that use some arch-specific definition (such
as hardware lock-elision or linuxthreads compat) requires specific
headers.
For 32 bit, the generic definitions mimic the other 32-bit ports
of using an union to define the fields uses on adaptive and robust
mutexes (thus not allowing both usage at same time) and by using a
single linked-list for robust mutexes. Both decisions seemed to
follow what recent ports have done and make the resulting
pthread_mutex_t/mtx_t object smaller.
Also the static intialization macro for pthread_mutex_t is set to use
a macro __PTHREAD_MUTEX_INITIALIZER where the architecture can redefine
in its struct_mutex.h if it requires additional fields to be
initialized.
Checked with a build on affected abis.
Change-Id: I30a22c3e3497805fd6e52994c5925897cffcfe13
This patch new build tests to check for internal fields offsets for
internal pthread_rwlock_t definition. Althoug the '__data.__flags'
field layout should be preserved due static initializators, the patch
also adds tests for the futexes that may be used in a shared memory
(although using different libc version in such scenario is not really
supported).
Checked with a build against all affected ABIs.
Change-Id: Iccc103d557de13d17e4a3f59a0cad2f4a640c148
The offsets of pthread_mutex_t __data.__nusers, __data.__spins,
__data.elision, __data.list are not required to be constant over
the releases. Only the __data.__kind is used for static
initializers.
This patch also adds an additional size check for __data.__kind.
Checked with a build against affected ABIs.
Change-Id: I7a4e48cc91b4c4ada57e9a5d1b151fb702bfaa9f
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. I also checked
the libpthread.so .gnu.version_d entries for every ABI affected and
all of them contains the required versions (including for architectures
which exports __nanosleep with a different version).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Passing NULL as the timeout parameter to pthread_timedjoin_np has resulted
in it behaving like pthread_join for a long time. Since that is now the
documented behaviour, we ought to test that both it and the new
pthread_clockjoin_np support it.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that
accepts a clockid_t parameter to indicate which clock the timeout should be
measured against. This mirrors the recently-added POSIX-proposed "clock"
wait functions.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the generic futex_lock_pi and futex_unlock_pi to wrap
around the syscall machinery required to issue the syscall calls. It
simplifies a bit the futex code required to implement PI mutexes.
No function changes, checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To help y2038 work avoid duplicate all the logic of nanosleep on
non cancellable version, the patch replace it with a new futex
operation, lll_timedwait. The changes are:
- Add a expected value for __lll_clocklock_wait, so it can be used
to wait for generic values.
- Remove its internal atomic operation and move the logic to
__lll_clocklock. It makes __lll_clocklock_wait even more generic
and __lll_clocklock slight faster on fast-path (since it won't
require a function call anymore).
- Add lll_timedwait, which uses __lll_clocklock_wait, to replace both
__pause_nocancel and __nanosleep_nocancel.
It also allows remove the sparc32 __lll_clocklock_wait implementation
(since it is similar to the generic one).
Checked on x86_64-linux-gnu, sparcv9-linux-gnu, and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
Document in comments that __pthread_enable_asynccancel and
__pthread_disable_asynccancel must be AS-safe in general with
the exception of the act of cancellation.
All nptl targets have these signal definitions nowadays. This
changes also replaces the nptl-generic version of pthread_sigmask
with the Linux version.
Tested on x86_64-linux-gnu and i686-linux-gnu. Built with
build-many-glibcs.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Recent GCC versions warn about the attempt to return the address of a
local variable:
tst-pthread-getattr.c: In function ‘allocate_and_test’:
tst-pthread-getattr.c:54:10: error: function returns address of local variable [-Werror=return-local-addr]
54 | return mem;
| ^~~
In file included from ../include/alloca.h:3,
from tst-pthread-getattr.c:26:
../stdlib/alloca.h:35:23: note: declared here
35 | # define alloca(size) __builtin_alloca (size)
| ^~~~~~~~~~~~~~~~~~~~~~~
tst-pthread-getattr.c:51:9: note: in expansion of macro ‘alloca’
51 | mem = alloca ((size_t) (mem - target));
| ^~~~~~
The address itself is used in a check in the caller, so using
uintptr_t instead is reasonable.
In afe4de7d28, I added forwarding functions
from libc to libpthread for __pthread_cond_clockwait and
pthread_cond_clockwait to mirror those for pthread_cond_timedwait. These
are unnecessary[1], since these functions aren't (yet) being called from
within libc itself. Let's remove them.
* nptl/forward.c: Remove unnecessary __pthread_cond_clockwait and
pthread_cond_clockwait forwarding functions. There are no internal
users, so it is unnecessary to expose these functions in libc.so.
* sysdeps/nptl/pthread-functions.h (pthread_functions): Remove
unnecessary ptr___pthread_cond_clockwait member.
* nptl/nptl-init.c (pthread_functions): Remove assignment of
removed member.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://sourceware.org/ml/libc-alpha/2017-10/msg00082.html
The only implementation of futex_supports_exact_relative_timeouts always
returns true. Let's remove it and all its callers.
* nptl/pthread_cond_wait.c: (__pthread_cond_clockwait): Remove code
that is only useful if futex_supports_exact_relative_timeouts ()
returns false.
* nptl/pthread_condattr_setclock.c: (pthread_condattr_setclock):
Likewise.
* sysdeps/nptl/futex-internal.h: Remove comment about relative
timeouts potentially being imprecise since it's no longer true.
Remove declaration of futex_supports_exact_relative_timeouts.
* sysdeps/unix/sysv/linux/futex-internal.h: Remove implementation
of futex_supports_exact_relative_timeouts.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Rename lll_timedlock to lll_clocklock and add clockid
parameter to indicate the clock that the abstime parameter should
be measured against in preparation for adding
pthread_mutex_clocklock.
The name change mirrors the naming for the exposed pthread functions:
timed => absolute timeout measured against CLOCK_REALTIME (or clock
specified by attribute in the case of pthread_cond_timedwait.)
clock => absolute timeout measured against clock specified in preceding
parameter.
* sysdeps/nptl/lowlevellock.h (lll_clocklock): Rename from
lll_timedlock and add clockid parameter. (__lll_clocklock): Rename
from __lll_timedlock and add clockid parameter.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_clocklock):
Likewise.
* nptl/lll_timedlock_wait.c (__lll_clocklock_wait): Rename from
__lll_timedlock_wait and add clockid parameter. Use __clock_gettime
rather than __gettimeofday so that clockid can be used. This means
that conversion from struct timeval is no longer required.
* sysdeps/sparc/sparc32/lowlevellock.c (lll_clocklock_wait):
Likewise.
* sysdeps/sparc/sparc32/lll_timedlock_wait.c: Update comment to
refer to __lll_clocklock_wait rather than __lll_timedlock_wait.
* nptl/pthread_mutex_timedlock.c (lll_clocklock_elision): Rename
from lll_timedlock_elision, add clockid parameter and use
meaningful names for other parameters. (__pthread_mutex_timedlock):
Pass CLOCK_REALTIME where necessary to lll_clocklock and
lll_clocklock_elision.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_clocklock_elision): Rename from lll_timedlock_elision and add
clockid parameter. (__lll_clocklock_elision): Rename from
__lll_timedlock_elision and add clockid parameter.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-timed.c
(__lll_lock_elision): Call __lll_clocklock_elision rather than
__lll_timedlock_elision. (EXTRAARG): Add clockid parameter.
(LLL_LOCK): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-timed.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-timed.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add:
int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
and:
int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
which behave like pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock respectively, except they always measure
abstime against the supplied clockid. The functions currently support
CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other
clock is specified.
* sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and
pthread_wrlock_clockwrlock.
* nptl/Makefile: Build pthread_rwlock_clockrdlock.c and
pthread_rwlock_clockwrlock.c.
* nptl/pthread_rwlock_clockrdlock.c: Implement
pthread_rwlock_clockrdlock.
* nptl/pthread_rwlock_clockwrlock.c: Implement
pthread_rwlock_clockwrlock.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add
clockid parameter and verify that it indicates a supported clock on
entry so that we fail even if it doesn't end up being used. Pass
that clock on to futex_abstimed_wait when necessary.
(__pthread_rwlock_wrlock_full): Likewise.
* nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass
CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't
be used because there's no timeout.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass
CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't
be used because there is no timeout.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime
uses that clock.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime
uses that clock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock timeout tests to match the existing
pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests.
* nptl/tst-rwlock14.c (do_test): Likewise.
* nptl/tst-rwlock6.c Invent verbose_printf macro, and use for
ancillary output throughout. (tf): Accept thread_args structure so
that rwlock, a clockid and function name can be passed to the
thread. (do_test_clock): Rename from do_test. Accept clockid
parameter to specify test clock. Use the magic clockid value of
CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock should be tested, otherwise pass the
specified clockid to pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* nptl/tst-rwlock7.c: Likewise.
* nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept
thread_args structure so that the (now int) thread number, the
clockid and the function name can be passed to the thread.
(do_test_clock): Renamed from do_test. Pass the necessary
thread_args when creating the reader and writer threads. Use
xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* manual/threads.texi: Add documentation for
pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
As recommended by the comments in the implementations of
pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock, let's move
the timeout validity checks into the corresponding pthread_rwlock_rdlock_full
and pthread_rwlock_wrlock_full functions. Since these functions may be
called with abstime == NULL, an extra check for that is necessary too.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full):
Check validity of abstime parameter.
(__pthread_rwlock_rwlock_full): Likewise.
* nptl/pthread_rwlock_timedrdlock.c
* (pthread_rwlock_timedrdlock):
Remove check for validity of abstime parameter.
* nptl/pthread_rwlock_timedwrlock.c
* (pthread_rwlock_timedwrlock):
Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add:
int pthread_cond_clockwait (pthread_cond_t *cond,
pthread_mutex_t *mutex,
clockid_t clockid,
const struct timespec *abstime)
which behaves just like pthread_cond_timedwait except it always measures
abstime against the supplied clockid. Currently supports CLOCK_REALTIME
and
CLOCK_MONOTONIC and returns EINVAL if any other clock is specified.
Includes feedback from many others. This function was originally
proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group
preferred the new name.
* nptl/Makefile: Add tst-cond26 and tst-cond27
* nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait
* sysdeps/nptl/pthread.h: Likewise
* nptl/forward.c: Add __pthread_cond_clockwait
* nptl/forward.c: Likewise
* nptl/pthreadP.h: Likewise
* sysdeps/nptl/pthread-functions.h: Likewise
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add
clockid parameter and comment describing why we don't need to
check
its value. Use that value when calling
futex_abstimed_wait_cancelable rather than reading the clock
from
the flags. (__pthread_cond_wait): Pass unused clockid parameter.
(__pthread_cond_timedwait): Read clock from flags and pass it to
__pthread_cond_wait_common. (__pthread_cond_clockwait): Add new
function with weak alias from pthread_cond_clockwait.
* sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist
* (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-cond11.c (run_test): Support testing
pthread_cond_clockwait too by using a special magic
CLOCK_USE_ATTR_CLOCK value to determine whether to call
pthread_cond_timedwait or pthread_cond_clockwait. (do_test):
Pass
CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using
all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME.
* ntpl/tst-cond26.c: New test for passing unsupported and
* invalid
clocks to pthread_cond_clockwait.
* nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using
struct timespec and pthread_cond_clockwait.
* manual/threads.texi: Document pthread_cond_clockwait. The
* comment
was provided by Carlos O'Donell.
[1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In preparation for adding POSIX clockwait variants of timedwait functions,
add a clockid_t parameter to futex_abstimed_wait functions and pass
CLOCK_REALTIME from all callers for the time being.
Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset
which takes a clockid_t parameter rather than the magic clockbit.
* sysdeps/nptl/lowlevellock-futex.h,
sysdeps/unix/sysv/linux/lowlevellock-futex.h: Replace
lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset that
takes a clockid rather than a special clockbit.
* sysdeps/nptl/lowlevellock-futex.h: Add
lll_futex_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling lll_futex_clock_wait_bitset.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h
(futex_abstimed_wait, futex_abstimed_wait_cancelable): Add
clockid_t parameter to indicate which clock the absolute time
passed should be measured against. Pass that clockid onto
lll_futex_clock_wait_bitset. Add invalid clock as reason for
returning -EINVAL.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h: Introduce
futex_abstimed_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling futex_abstimed_wait.
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Remove
code to calculate relative timeout for
__PTHREAD_COND_CLOCK_MONOTONIC_MASK and just pass CLOCK_MONOTONIC
or CLOCK_REALTIME as required to futex_abstimed_wait_cancelable.
* nptl/pthread_rwlock_common (__pthread_rwlock_rdlock_full)
(__pthread_wrlock_full), nptl/sem_waitcommon (do_futex_wait): Pass
additional CLOCK_REALTIME to futex_abstimed_wait_cancelable.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock):
Switch to lll_futex_clock_wait_bitset and pass CLOCK_REALTIME
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
With commit f0b2132b35 ("ld.so:
Support moving versioned symbols between sonames [BZ #24741]"), the
dynamic linker will find the definition of vfork in libc and binds
a vfork reference to that symbol, even if the soname in the version
reference says that the symbol should be located in libpthread.
As a result, the forwarder (whether it's IFUNC-based or a duplicate
of the libc implementation) is no longer necessary.
On older architectures, a placeholder symbol is required, to make sure
that the GLIBC_2.1.2 symbol version does not go away, or is turned in
to a weak symbol definition by the link editor. (The symbol version
needs to preserved so that the symbol coverage check in
elf/dl-version.c does not fail for old binaries.)
mips32 is an outlier: It defined __vfork@@GLIBC_2.2, but the
baseline is GLIBC_2.0. Since there are other @@GLIBC_2.2 symbols,
the placeholder symbol is not needed there.
Since hppa is not an outlier anymore regarding LLL_LOCK_INITIALIZER value,
we can now assume it 0 for all architectures.
Checked on a build for all major ABIs.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
initialization for LLL_LOCK_INITIALIZER different than 0.
* nptl/old_pthread_cond_broadcast.c (__pthread_cond_broadcast_2_0):
Assume LLL_LOCK_INITIALIZER being 0.
* nptl/old_pthread_cond_signal.c (__pthread_cond_signal_2_0): Likewise.
* nptl/old_pthread_cond_timedwait.c (__pthread_cond_timedwait_2_0):
Likewise.
* nptl/old_pthread_cond_wait.c (__pthread_cond_wait_2_0): Likewise.
* sysdeps/nptl/libc-lockP.h (__libc_lock_define_initialized): Likewise.
This patch move the single-thread syscall optimization defintions from
syscall-cancel.h to new header file single-thread.h and also move the
cancellation definitions from pthreadP.h to syscall-cancel.h.
The idea is just simplify the inclusion of both syscall-cancel.h and
single-thread.h (without the requirement of including all pthreadP.h
defintions).
No semantic changes expected, checked on a build for all major ABIs.
* nptl/pthreadP.h (CANCEL_ASYNC, CANCEL_RESET, LIBC_CANCEL_ASYNC,
LIBC_CANCEL_RESET, __libc_enable_asynccancel,
__libc_disable_asynccancel, __librt_enable_asynccancel,
__libc_disable_asynccancel, __librt_enable_asynccancel,
__librt_disable_asynccancel): Move to ...
* sysdeps/unix/sysv/linux/sysdep-cancel.h: ... here.
(SINGLE_THREAD_P, RTLD_SINGLE_THREAD_P): Move to ...
* sysdeps/unix/sysv/linux/single-thread.h: ... here.
* sysdeps/generic/single-thread.h: New file.
* sysdeps/unix/sysdep.h: Include single-thread.h.
* sysdeps/unix/sysv/linux/futex-internal.h: Include sysdep-cancel.h.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-rwlock6.c: Use libsupport. This also happens to fix a
small bug where only tv.tv_usec was checked which could cause an
erroneous pass if pthread_rwlock_timedrdlock incorrectly took more
than a second.
* nptl/tst-rwlock7.c, nptl/tst-rwlock9.c, nptl/tst-rwlock14.c: Use
libsupport.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-sem5.c(do_test): Use xclock_gettime, timespec_add and
TEST_TIMESPEC_NOW_OR_AFTER from libsupport.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Don't run nptl/tst-eintr1 by normal make check because it can spuriously
break testing on various linux kernels. (Currently this affects the
aarch64 glibc buildbot machine which regularly fails and loses test
results.)
[BZ #24537]
* nptl/Makefile: Move tst-eintr1 to xtests.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-sem5.c: Remove unused headers. Add <support/check.h>.
(do_test) Use libsupport test macros rather than hand-coded
conditionals and error messages. Ensure that sem_init returns zero
rather than not -1. Use <support/test-driver.c> rather than
test-skeleton.c.
* nptl/tst-sem13.c: Add <support/check.h>. (do_test) Use libsupport
test macros rather than hand-coded conditionals and error messages.
Use <support/test-driver.c> rather than test-skeleton.c.
This patch refactor how hp-timing is used on loader code for statistics
report. The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and
HP_TIMING_INLINE is used instead to check for hp-timing avaliability.
For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE
is set iff for IS_IN(rtld).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.
* benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with
HP_TIMING_INLINE.
* nptl/descr.h: Likewise.
* elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF,
RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define.
(dl_start_final_info, _dl_start_final, dl_main, print_statistics):
Abstract hp-timing usage with RTLD_* macros.
* sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld).
(HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove.
* sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL,
HP_TIMING_NONAVAIL): Likewise.
* sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL,
HP_SMALL_TIMING_AVAIL): Likewise.
* sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
Likewise.
* sysdeps/generic/hp-timing-common.h: Update comment with
HP_TIMING_AVAIL removal.
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
This patch assumes realtime clock support for nptl and thus removes
all the associated code.
For __pthread_mutex_timedlock the fallback usage for the case where
lll_futex_timed_wait_bitset it not set define is also removed. The
generic lowlevellock-futex.h always define it, so for NPTL code the
check always yield true.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/nptl-init.c (__have_futex_clock_realtime,
__have_futex_clock_realtime): Remove definition.
(__pthread_initialize_minimal_internal): Remove FUTEX_CLOCK_REALTIME
check test for !__ASSUME_FUTEX_CLOCK_REALTIME.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Assume
__ASSUME_FUTEX_CLOCK_REALTIME support.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_FUTEX_CLOCK_REALTIME): Remove.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_timed_wait_bitset):
Adjust comment.
In pthread_tryjoin if pd->tid == 0 then we will not block on a
futex operation because we will immediately see the join is already
complete and return. The comment is fixed to reflect that.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
sys/procfs.h was already using this sysdeps directory.
This avoids the need for nptl-specific wrapper headers under
include/, a generic location in the source tree.
After commit f1ac745583 ("arm: Use "nr"
constraint for Systemtap probes [BZ #24164]"), we load pd->result into
a register in the probe below:
/* Free the TCB. */
__free_tcb (pd);
}
else
pd->joinid = NULL;
LIBC_PROBE (pthread_join_ret, 3, threadid, result, pd->result);
However, at this point, the thread descriptor has been freed. If the
thread stack does not fit into the thread stack cache, the memory will
have been unmapped, and the program will crash in the probe.
Patch ce7eb0e903 ("nptl: Cleanup cancellation macros") changed the
join sequence for internal common __pthread_timedjoin_ex to use the
new macro lll_wait_tid. The idea was this macro would issue the
cancellable futex operation depending whether the timeout is used or
not. However if a timeout is used, __lll_timedwait_tid is called and
it is not a cancellable entrypoint.
This patch fixes it by simplifying the code in various ways:
- Instead of adding the cancellation handling on __lll_timedwait_tid,
it moves the generic implementation to pthread_join_common.c (called
now timedwait_tid with some fixes to use the correct type for pid).
- The llvm_wait_tid macro is removed, along with its replication on
x86_64, i686, and sparc arch-specific lowlevellock.h.
- sparc32 __lll_timedwait_tid is also removed, since the code is similar
to generic one.
- x86_64 and i386 provides arch-specific __lll_timedwait_tid which is
also removed since they are similar in functionality to generic C code
and there is no indication it is better than compiler generated code.
New tests, tst-join8 and tst-join9, are provided to check if
pthread_timedjoin_np acts as a cancellation point.
Checked on x86_64-linux-gnu, i686-linux-gnu, sparcv9-linux-gnu, and
aarch64-linux-gnu.
[BZ #24215]
* nptl/Makefile (lpthread-routines): Remove lll_timedwait_tid.
(tests): Add tst-join8 tst-join9.
* nptl/lll_timedwait_tid.c: Remove file.
* sysdeps/sparc/sparc32/lll_timedwait_tid.c: Likewise.
* sysdeps/unix/sysv/linux/i386/lll_timedwait_tid.c: Likewise.
* sysdeps/sysv/linux/x86_64/lll_timedwait_tid.c: Likewise.
* nptl/pthread_join_common.c (timedwait_tid): New function.
(__pthread_timedjoin_ex): Act as cancellation entrypoint is block
is set.
* nptl/tst-join5.c (thread_join): New function.
(tf1, tf2, do_test): Use libsupport and add pthread_timedjoin_np
check.
* nptl/tst-join8.c: New file.
* nptl/tst-join9.c: Likewise.
* sysdeps/nptl/lowlevellock-futex.h (lll_futex_wait_cancel,
lll_futex_timed_wait_cancel): Add generic macros.
* sysdeps/nptl/lowlevellock.h (__lll_timedwait_tid, lll_wait_tid):
Remove definitions.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/sparc/sparc32/lowlevellock.c (__lll_timedwait_tid):
Remove function.
* sysdeps/unix/sysv/linux/i386/lowlevellock.S (__lll_timedwait_tid):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_timed_wait_cancel): New macro.
The clone.S patch fixes 2 elfutils testsuite unwind failures, where the
backtrace gets stuck repeating __thread_start until we hit the backtrace
limit. This was confirmed by building and installing a patched glibc and
then building elfutils and running its testsuite.
Unfortunately, the testcase isn't working as expected and I don't know why.
The testcase passes even when my clone.S patch is not installed. The testcase
looks logically similarly to the elfutils testcases that are failing. Maybe
there is a subtle difference in how the glibc unwinding works versus the
elfutils unwinding? I don't have good gdb pthread support yet, so I haven't
found a way to debug this. Anyways, I don't know if the testcase is useful or
not. If the testcase isn't useful then maybe the clone.S patch is OK without
a testcase?
Jim
[BZ #24040]
* elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0.
* elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h
(func): New.
(main): If USE_PTHREADS, call pthread_create to run func. Otherwise
call func directly.
* nptl/Makefile (tests): Add tst-unwind-thread.
(CFLAGS-tst-unwind-thread.c): Define.
* nptl/tst-unwind-thread.c: New file.
* sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra
as undefined.
Commit 27761a1042 ("Refactor atfork
handlers") introduced a lock, atfork_lock, around fork handler list
accesses. It turns out that this lock occasionally results in
self-deadlocks in malloc/tst-mallocfork2:
(gdb) bt
#0 __lll_lock_wait_private ()
at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:63
#1 0x00007f160c6f927a in __run_fork_handlers (who=(unknown: 209394016),
who@entry=atfork_run_prepare) at register-atfork.c:116
#2 0x00007f160c6b7897 in __libc_fork () at ../sysdeps/nptl/fork.c:58
#3 0x00000000004027d6 in sigusr1_handler (signo=<optimized out>)
at tst-mallocfork2.c:80
#4 sigusr1_handler (signo=<optimized out>) at tst-mallocfork2.c:64
#5 <signal handler called>
#6 0x00007f160c6f92e4 in __run_fork_handlers (who=who@entry=atfork_run_parent)
at register-atfork.c:136
#7 0x00007f160c6b79a2 in __libc_fork () at ../sysdeps/nptl/fork.c:152
#8 0x0000000000402567 in do_test () at tst-mallocfork2.c:156
#9 0x0000000000402dd2 in support_test_main (argc=1, argv=0x7ffc81ef1ab0,
config=config@entry=0x7ffc81ef1970) at support_test_main.c:350
#10 0x0000000000402362 in main (argc=<optimized out>, argv=<optimized out>)
at ../support/test-driver.c:168
If no locking happens in the single-threaded case (where fork is
expected to be async-signal-safe), this deadlock is avoided.
(pthread_atfork is not required to be async-signal-safe, so a fork
call from a signal handler interrupting pthread_atfork is not
a problem.)
While debugging a kernel warning, Thomas Gleixner, Sebastian Sewior and
Heiko Carstens found a bug in pthread_mutex_trylock due to misordered
instructions:
140: a5 1b 00 01 oill %r1,1
144: e5 48 a0 f0 00 00 mvghi 240(%r10),0 <--- THREAD_SETMEM (THREAD_SELF, robust_head.list_op_pending, NULL);
14a: e3 10 a0 e0 00 24 stg %r1,224(%r10) <--- last THREAD_SETMEM of ENQUEUE_MUTEX_PI
vs (with compiler barriers):
140: a5 1b 00 01 oill %r1,1
144: e3 10 a0 e0 00 24 stg %r1,224(%r10)
14a: e5 48 a0 f0 00 00 mvghi 240(%r10),0
Please have a look at the discussion:
"Re: WARN_ON_ONCE(!new_owner) within wake_futex_pi() triggerede"
(https://lore.kernel.org/lkml/20190202112006.GB3381@osiris/)
This patch is introducing the same compiler barriers and comments
for pthread_mutex_trylock as introduced for pthread_mutex_lock and
pthread_mutex_timedlock by commit 8f9450a0b7
"Add compiler barriers around modifications of the robust mutex list."
ChangeLog:
[BZ #24180]
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
One group of warnings seen with -Wextra is warnings for static or
inline not at the start of a declaration (-Wold-style-declaration).
This patch fixes various such cases for inline, ensuring it comes at
the start of the declaration (after any static). A common case of the
fix is "static inline <type> __always_inline"; the definition of
__always_inline starts with __inline, so the natural change is to
"static __always_inline <type>". Other cases of the warning may be
harder to fix (one pattern is a function definition that gets
rewritten to be static by an including file, "#define funcname static
wrapped_funcname" or similar), but it seems worth fixing these cases
with inline anyway.
Tested for x86_64.
* elf/dl-load.h (_dl_postprocess_loadcmd): Use __always_inline
before return type, without separate inline.
* elf/dl-tunables.c (maybe_enable_malloc_check): Likewise.
* elf/dl-tunables.h (tunable_is_name): Likewise.
* malloc/malloc.c (do_set_trim_threshold): Likewise.
(do_set_top_pad): Likewise.
(do_set_mmap_threshold): Likewise.
(do_set_mmaps_max): Likewise.
(do_set_mallopt_check): Likewise.
(do_set_perturb_byte): Likewise.
(do_set_arena_test): Likewise.
(do_set_arena_max): Likewise.
(do_set_tcache_max): Likewise.
(do_set_tcache_count): Likewise.
(do_set_tcache_unsorted_limit): Likewise.
* nis/nis_subr.c (count_dots): Likewise.
* nptl/allocatestack.c (advise_stack_range): Likewise.
* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Likewise.
(do_sin): Likewise.
(reduce_sincos): Likewise.
(do_sincos): Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c
(do_set_elision_enable): Likewise.
(TUNABLE_CALLBACK_FNDECL): Likewise.
The alignment of TLS variables is wrong if accessed from within a thread
for architectures with tls variant TLS_TCB_AT_TP.
For the main thread the static tls data is properly aligned.
For other threads the alignment depends on the alignment of the thread
pointer as the static tls data is located relative to this pointer.
This patch adds this alignment for TLS_TCB_AT_TP variants in the same way
as it is already done for TLS_DTV_AT_TP. The thread pointer is also already
properly aligned if the user provides its own stack for the new thread.
This patch extends the testcase nptl/tst-tls1.c in order to check the
alignment of the tls variables and it adds a pthread_create invocation
with a user provided stack.
The test itself is migrated from test-skeleton.c to test-driver.c
and the missing support functions xpthread_attr_setstack and xposix_memalign
are added.
ChangeLog:
[BZ #23403]
* nptl/allocatestack.c (allocate_stack): Align pointer pd for
TLS_TCB_AT_TP tls variant.
* nptl/tst-tls1.c: Migrate to support/test-driver.c.
Add alignment checks.
* support/Makefile (libsupport-routines): Add xposix_memalign and
xpthread_setstack.
* support/support.h: Add xposix_memalign.
* support/xthread.h: Add xpthread_attr_setstack.
* support/xposix_memalign.c: New File.
* support/xpthread_attr_setstack.c: Likewise.
For a full analysis of both the pthread_rwlock_tryrdlock() stall
and the pthread_rwlock_trywrlock() stall see:
https://sourceware.org/bugzilla/show_bug.cgi?id=23844#c14
In the pthread_rwlock_trydlock() function we fail to inspect for
PTHREAD_RWLOCK_FUTEX_USED in __wrphase_futex and wake the waiting
readers.
In the pthread_rwlock_trywrlock() function we write 1 to
__wrphase_futex and loose the setting of the PTHREAD_RWLOCK_FUTEX_USED
bit, again failing to wake waiting readers during unlock.
The fix in the case of pthread_rwlock_trydlock() is to check for
PTHREAD_RWLOCK_FUTEX_USED and wake the readers.
The fix in the case of pthread_rwlock_trywrlock() is to only write
1 to __wrphase_futex if we installed the write phase, since all other
readers would be spinning waiting for this step.
We add two new tests, one exercises the stall for
pthread_rwlock_trywrlock() which is easy to exercise, and one exercises
the stall for pthread_rwlock_trydlock() which is harder to exercise.
The pthread_rwlock_trywrlock() test fails consistently without the fix,
and passes after. The pthread_rwlock_tryrdlock() test fails roughly
5-10% of the time without the fix, and passes all the time after.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Torvald Riegel <triegel@redhat.com>
Signed-off-by: Rik Prohaska <prohaska7@gmail.com>
Co-authored-by: Torvald Riegel <triegel@redhat.com>
Co-authored-by: Rik Prohaska <prohaska7@gmail.com>
This patch wraps all uses of *_{enable,disable}_asynccancel and
and *_CANCEL_{ASYNC,RESET} in either already provided macros
(lll_futex_timed_wait_cancel) or creates new ones if the
functionality is not provided (SYSCALL_CANCEL_NCS, lll_futex_wait_cancel,
and lll_futex_timed_wait_cancel).
Also for some generic implementations, the direct call of the macros
are removed since the underlying symbols are suppose to provide
cancellation support.
This is a priliminary patch intended to simplify the work required
for BZ#12683 fix. It is a refactor change, no semantic changes are
expected.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/pthread_join_common.c (__pthread_timedjoin_ex): Use
lll_wait_tid with timeout.
* nptl/sem_wait.c (__old_sem_wait): Use lll_futex_wait_cancel.
* sysdeps/nptl/aio_misc.h (AIO_MISC_WAIT): Use
futex_reltimed_wait_cancelable for cancelabla mode.
* sysdeps/nptl/gai_misc.h (GAI_MISC_WAIT): Likewise.
* sysdeps/posix/open64.c (__libc_open64): Do not call cancelation
macros.
* sysdeps/posix/sigwait.c (__sigwait): Likewise.
* sysdeps/posix/waitid.c (__sigwait): Likewise.
* sysdeps/unix/sysdep.h (__SYSCALL_CANCEL_CALL,
SYSCALL_CANCEL_NCS): New macro.
* sysdeps/nptl/lowlevellock.h (lll_wait_tid): Add timeout argument.
(lll_timedwait_tid): Remove macro.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (lll_wait_tid):
Likewise.
(lll_timedwait_tid): Likewise.
* sysdeps/unix/sysv/linux/clock_nanosleep.c (__clock_nanosleep):
Use INTERNAL_SYSCALL_CANCEL.
* sysdeps/unix/sysv/linux/futex-internal.h
(futex_reltimed_wait_cancelable): Use LIBC_CANCEL_{ASYNC,RESET}
instead of __pthread_{enable,disable}_asynccancel.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h
(lll_futex_wait_cancel): New macro.
With upcoming fix for BZ#12683, pthread cancellation does not act for:
1. If syscall is blocked but with some side effects already having
taken place (e.g. a partial read or write).
2. After the syscall has returned.
The main change is due the fact programs need to act in syscalls with
side-effects (for instance, to avoid leak of allocated resources or
handle partial read/write).
This patch changes the NPTL testcase that assumes the old behavior and
also changes the tst-backtrace{5,6} to ignore the cancellable wrappers.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
powerpc-linux-gnu, sparcv9-linux-gnu, and sparc64-linux-gnu.
* debug/tst-backtrace5.c (handle_signal): Avoid cancellable wrappers
in backtrace analysis.
* nptl/tst-cancel4.c (tf_write): Handle cancelled syscall with
side-effects.
(tf_send): Likewise.
In the read lock function (__pthread_rwlock_rdlock_full) there was a
code path which would fail to reload __readers while waiting for
PTHREAD_RWLOCK_RWAITING to change. This failure to reload __readers
into a local value meant that various conditionals used the old value
of __readers and with only two threads left it could result in an
indefinite stall of one of the readers (waiting for PTHREAD_RWLOCK_RWAITING
to go to zero, but it never would).
This patch eliminates the gen-py-const.awk variant of gen-as-const,
switching to use of gnu-as-const.py (with a new --python option) to
process .pysym files (i.e., to generate nptl_lock_constants.py), as
the syntax of those files is identical to that of .sym files.
Note that the generated nptl_lock_constants.py is *not* identical to
the version generated by the awk script. Apart from the trivial
changes (comment referencing the new script, and output being sorted),
the constant FUTEX_WAITERS, PTHREAD_MUTEXATTR_FLAG_BITS,
PTHREAD_MUTEXATTR_FLAG_PSHARED and PTHREAD_MUTEX_PRIO_CEILING_MASK are
now output as positive rather than negative constants (on x86_64
anyway; maybe not necessarily on 32-bit systems):
< FUTEX_WAITERS = -2147483648
---
> FUTEX_WAITERS = 2147483648
< PTHREAD_MUTEXATTR_FLAG_BITS = -251662336
< PTHREAD_MUTEXATTR_FLAG_PSHARED = -2147483648
---
> PTHREAD_MUTEXATTR_FLAG_BITS = 4043304960
> PTHREAD_MUTEXATTR_FLAG_PSHARED = 2147483648
< PTHREAD_MUTEX_PRIO_CEILING_MASK = -524288
---
> PTHREAD_MUTEX_PRIO_CEILING_MASK = 4294443008
This is because gen-as-const has a cast of the constant value to long
int, which gen-py-const lacks.
I think the positive values are more logically correct, since the
constants in question are in fact unsigned in C. But to reliably
produce gen-as-const.py output for constants that always (in C and
Python) reflects the signedness of values with the high bit of "long
int" set would mean more complicated logic needs to be used in
computing values.
The more correct positive values by themselves produce a failure of
nptl/test-mutexattr-printers, because masking with
~PTHREAD_MUTEXATTR_FLAG_BITS & ~PTHREAD_MUTEX_NO_ELISION_NP now leaves
a bit -1 << 32 in the Python value, resulting in a KeyError exception.
To avoid that, places masking with ~ of one of the constants in
question are changed to mask with 0xffffffff as well (this reflects
how ~ in Python applies to an infinite-precision integer whereas ~ in
C does not do any promotions beyond the width of int).
Tested for x86_64.
* scripts/gen-as-const.py (main): Handle --python option.
* scripts/gen-py-const.awk: Remove.
* Makerules (py-const-script): Use gen-as-const.py.
($(py-const)): Likewise.
* nptl/nptl-printers.py (MutexPrinter.read_status_no_robust): Mask
with 0xffffffff together with ~(PTHREAD_MUTEX_PRIO_CEILING_MASK).
(MutexAttributesPrinter.read_values): Mask with 0xffffffff
together with ~PTHREAD_MUTEXATTR_FLAG_BITS and
~PTHREAD_MUTEX_NO_ELISION_NP.
* manual/README.pretty-printers: Update reference to
gen-py-const.awk.
This patch does not have any functionality change, we only provide a spin
count tunes for pthread adaptive spin mutex. The tunable
glibc.pthread.mutex_spin_count tunes can be used by system administrator to
squeeze system performance according to different hardware capabilities and
workload characteristics.
The maximum value of spin count is limited to 32767 to avoid the overflow
of mutex->__data.__spins variable with the possible type of short in
pthread_mutex_lock ().
The default value of spin count is set to 100 with the reference to the
previous number of times of spinning via trylock. This value would be
architecture-specific and can be tuned with kinds of benchmarks to fit most
cases in future.
I would extend my appreciation sincerely to H.J.Lu for his help to refine
this patch series.
* manual/tunables.texi (POSIX Thread Tunables): New node.
* nptl/Makefile (libpthread-routines): Add pthread_mutex_conf.
* nptl/nptl-init.c: Include pthread_mutex_conf.h
(__pthread_initialize_minimal_internal) [HAVE_TUNABLES]: Call
__pthread_tunables_init.
* nptl/pthreadP.h (MAX_ADAPTIVE_COUNT): Remove.
(max_adaptive_count): Define.
* nptl/pthread_mutex_conf.c: New file.
* nptl/pthread_mutex_conf.h: New file.
* sysdeps/generic/adaptive_spin_count.h: New file.
* sysdeps/nptl/dl-tunables.list: New file.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Use
max_adaptive_count () not MAX_ADAPTIVE_COUNT.
* nptl/pthread_mutex_timedlock.c (__pthrad_mutex_timedlock):
Likewise.
Suggested-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Kemi.wang <kemi.wang@intel.com>
There is a data-dependency between the fields of struct l_reloc_result
and the field used as the initialization guard. Users of the guard
expect writes to the structure to be observable when they also observe
the guard initialized. The solution for this problem is to use an acquire
and release load and store to ensure previous writes to the structure are
observable if the guard is initialized.
The previous implementation used DL_FIXUP_VALUE_ADDR (l_reloc_result->addr)
as the initialization guard, making it impossible for some architectures
to load and store it atomically, i.e. hppa and ia64, due to its larger size.
This commit adds an unsigned int to l_reloc_result to be used as the new
initialization guard of the struct, making it possible to load and store
it atomically in all architectures. The fix ensures that the values
observed in l_reloc_result are consistent and do not lead to crashes.
The algorithm is documented in the code in elf/dl-runtime.c
(_dl_profile_fixup). Not all data races have been eliminated.
Tested with build-many-glibcs and on powerpc, powerpc64, and powerpc64le.
[BZ #23690]
* elf/dl-runtime.c (_dl_profile_fixup): Guarantee memory
modification order when accessing reloc_result->addr.
* include/link.h (reloc_result): Add field init.
* nptl/Makefile (tests): Add tst-audit-threads.
(modules-names): Add tst-audit-threads-mod1 and
tst-audit-threads-mod2.
Add rules to build tst-audit-threads.
* nptl/tst-audit-threads-mod1.c: New file.
* nptl/tst-audit-threads-mod2.c: Likewise.
* nptl/tst-audit-threads.c: Likewise.
* nptl/tst-audit-threads.h: Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All the required code already existed, and some of it was already
running.
AT_SYSINFO_EHDR is processed if NEED_DL_SYSINFO_DSO is defined, but it
looks like it always is. The call to setup_vdso is also unconditional,
so all that was left to do was setup the function pointers and use
them. This patch just deletes some #ifdef to enable that.
[BZ #19767]
* nptl/Makefile (tests-static): Add tst-cond11-static.
(tests): Likewise.
* nptl/tst-cond11-static.c: New File.
* sysdeps/unix/sysv/linux/Makefile (tests-static): Add
tst-affinity-static.
(tests): Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h: Check USE_VSYSCALL
instead of SHARED.
* sysdeps/unix/sysv/linux/sysdep.h (ALWAYS_USE_VSYSCALL): New.
(USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/tst-affinity-static.c: New file.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Check USE_VSYSCALL
instead of SHARED.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Don't check
SHARED.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (ALWAYS_USE_VSYSCALL):
New.
The race leads either to pthread_mutex_destroy returning EBUSY
or triggering an assertion (See description in bugzilla).
This patch is fixing the race by ensuring that the elision path is
used in all cases if elision is enabled by the GLIBC_TUNABLES framework.
The __kind variable in struct __pthread_mutex_s is accessed concurrently.
Therefore we are now using the atomic macros.
The new testcase tst-mutex10 is triggering the race on s390x and intel.
Presumably also on power, but I don't have access to a power machine
with lock-elision. At least the code for power is the same as on the other
two architectures.
ChangeLog:
[BZ #23275]
* nptl/tst-mutex10.c: New File.
* nptl/Makefile (tests): Add tst-mutex10.
(tst-mutex10-ENV): New variable.
* sysdeps/unix/sysv/linux/s390/force-elision.h: (FORCE_ELISION):
Ensure that elision path is used if elision is available.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h (FORCE_ELISION):
Likewise.
* sysdeps/unix/sysv/linux/x86/force-elision.h: (FORCE_ELISION):
Likewise.
* nptl/pthreadP.h (PTHREAD_MUTEX_TYPE, PTHREAD_MUTEX_TYPE_ELISION)
(PTHREAD_MUTEX_PSHARED): Use atomic_load_relaxed.
* nptl/pthread_mutex_consistent.c (pthread_mutex_consistent): Likewise.
* nptl/pthread_mutex_getprioceiling.c (pthread_mutex_getprioceiling):
Likewise.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full)
(__pthread_mutex_cond_lock_adjust): Likewise.
* nptl/pthread_mutex_setprioceiling.c (pthread_mutex_setprioceiling):
Likewise.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Likewise.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h (struct __pthread_mutex_s):
Add comments.
* nptl/pthread_mutex_destroy.c (__pthread_mutex_destroy):
Use atomic_load_relaxed and atomic_store_relaxed.
* nptl/pthread_mutex_init.c (__pthread_mutex_init):
Use atomic_store_relaxed.
Set installed NPTL header as the expected one (instead of an
internal one for glibc testsuite) and add a hurd specific
stdc-predef with __STDC_NO_THREADS__.
Checked on both i686-linux-gnu and i686-gnu that both threads.h
and stdc-predef.h are the expected ones.
* nptl/threads.h: Move to ...
* sysdeps/nptl/threads.h: ... here.
* sysdeps/hurd/stdc-predef.h: New file.
