In 1999 the project split "localedir" into "localedir" (path to compiled
locale archives) and "msgcatdir" (path to message catalogs). This
predates the 2002 change in the GNU Coding Standard to document the use
of "localedir" for the path to the message catalogs. It appears that
newlib, gcc, and several other projects also used "msgcatdir" at one
point or another in the past, and so it is in line with historical
precedent that glibc would also use "msgcatdir." However, given that the
GNU Coding Standard uses "localedir", we will switch to that for
consistency as a GNU project. Previous uses of --localdir didn't work
anyway (see bug 14259).
I am committing this patch in the understanding that nobody would object
to fixing #14259 as part of aligning our variable usage to the GNU
Coding Standard.
Given that previous "localedir" uses were converted to "complocaledir"
by [1], we can now convert "msgcatdir" to "localedir" and complete the
transition. With an addition to config.make.in we also fix bug 14259 and
allow users to specify the locale dependent data directory with
"--localedir" at configure time. There is still no way to control at
configure time the location of the *compiled* locale directory.
Tested on x86_64 with no regressions.
Tested using "--localedir" to specify alternate locale dependent data
directory and verified with "make install DESTDIR=/tmp/glibc".
[1] 90fe682d30
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
acquiring wrlock. Do conv_tab allocation while holding lock.
* intl/Makefile: Add rules to build and run tst-gettext6.
* intl/tst-gettext6.c: New test.
* intl/tst-gettext6.sh: New file.
2005-03-27 Bruno Haible <bruno@clisp.org>
Make it possible for multiple threads to use gettext() in different
locales.
* intl/dcigettext.c (HAVE_PER_THREAD_LOCALE): New macro.
(struct known_translation_t): If HAVE_PER_THREAD_LOCALE, add localename
field.
(transcmp): If HAVE_PER_THREAD_LOCALE, compare localename fields.
(DCIGETTEXT): If HAVE_PER_THREAD_LOCALE, fill the localename field in
search and newp.
* intl/tst-gettext4.c: New file.
* intl/tst-gettext4.sh: New file.
* intl/tst-gettext4-de.po: New file.
* intl/tst-gettext4-fr.po: New file.
* intl/tst-gettext5.c: New file.
* intl/tst-gettext5.sh: New file.
* intl/Makefile (distribute): Add tst-gettext4.sh, tst-gettext4-de.po,
tst-gettext4-fr.po, tst-gettext5.sh.
(multithread-test-srcs): New variable.
(test-srcs): Add its contents.
(tests): Depend on tst-gettext4.out, tst-gettext5.out.
(tst-gettext4.out, tst-gettext5.out): New rules.
(CFLAGS-tst-gettext4.c, CFLAGS-tst-gettext5.c): New variables.
Add rule for linking the multithread-test-srcs with the appropriate
thread-library.
2005-04-28 Ulrich Drepper <drepper@redhat.com>
* po/rw.po: New file. From translation team.
2002-08-27 Ulrich Drepper <drepper@redhat.com>
* sysdeps/arm/Dist: Add bits/link.h.
* sunrpc/Makefile: Distribute thrsvc.
* stdio-common/Makefile: Remove more left-overs from old stdio.
* include/linewrap.h: Removed.
* libio/bug-mmap-fflush.c: Rewrite to not touch source directory.
* intl/Makefile (distribute): Add plural-eval.c.
* stdio-common/Makefile (headers): Remove bits/stdio_lim.h. This
file isn't distributed. Add special rules to install bits/stdio_lim.h.
* Make-dist: Remove traces of old stdio.
* Makeconfig: Likewise.
* locale/Makefile (localedef-aux): New variable. Only md5
assigned to it. These files are not ddistributed in this directory.
* sysdeps/unix/sysv/linux/s390/Dist: Add sys/procfs.h.
* sysdeps/unix/sysv/linux/s390/s390-64/Dist: Remove sys/procfs.h.
* sysdeps/unix/sysv/linux/s390/s390-32/Dist: Likewise.
* sysdeps/unix/sysv/linux/Dist: Remove sys/sendfile.h.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-04-05 David S. Miller <davem@redhat.com>
Add hp-timing support for sparcv9/sparc64 targets.
* sysdeps/sparc/sparc32/sparcv9/hp-timing.c: New file
* sysdeps/sparc/sparc32/sparcv9/hp-timing.h: New file
* sysdeps/sparc/sparc64/hp-timing.c: New file
* sysdeps/sparc/sparc64/hp-timing.h: New file
* sysdeps/sparc/sparc32/sparcv9/Makefile: Build hp-timing.
* sysdeps/sparc/sparc64/Makefile: Likewise.
2001-04-09 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/fd_to_filename.h: New file.
* sysdeps/unix/sysv/linux/fd_to_filename.h: New file.
* libio/freopen.c (freopen): If FILENAME is NULL, try to get
filename from the open file descriptor.
* libio/freopen64.c (freopen64): Likewise.
2001-04-09 Bruno Haible <haible@clisp.cons.org>
* misc/error.c (error): fflush stdout also if
error_print_progname != NULL.
(error_at_line): Likewise.
2001-04-07 Bruno Haible <haible@clisp.cons.org>
* intl/gettextP.h (struct loaded_domain): Add codeset_cntr field.
(struct binding): Add codeset_cntr field.
(_nl_load_domain): Add domainbinding argument.
(_nl_init_domain_conv, _nl_free_domain_conv): New declarations.
(_nl_find_msg): New declaration, moved here from loadinfo.h.
* intl/loadinfo.h (struct loaded_l10nfile): Remove domainbinding field.
(_nl_make_l10nflist): Remove domainbinding argument.
(_nl_find_msg): Move declaration to gettextP.h.
* intl/bindtextdom.c (set_binding_values): Initialize ->codeset_cntr
to 0. Increment it when ->codeset is changed.
* intl/dcigettext.c (DCIGETTEXT): Pass binding to _nl_find_msg.
(_nl_find_msg): Add domainbinding argument. Reinitialize the converter
if domainbinding->codeset_cntr has been incremented.
* intl/finddomain.c (_nl_find_domain): Don't pass domainbinding to
_nl_make_l10nflist(). Pass it to _nl_load_domain() instead.
* intl/l10nflist.c (_nl_make_l10nflist): Remove domainbinding argument.
* intl/loadmsgcat.c (_nl_init_domain_conv): New function, extracted
from _nl_load_domain. Append //TRANSLIT also when using libiconv.
(_nl_free_domain_conv): New function, extracted from _nl_unload_domain.
(_nl_load_domain): Add domainbinding argument. Call
_nl_init_domain_conv.
(_nl_unload_domain): Call _nl_free_domain_conv.
* intl/Makefile (distribute): Add tst-codeset.sh, tstcodeset.po.
(test-srcs): Add tst-codeset.
(tests): Depend on tst-codeset.out.
(tst-codeset.out): New rule.
(CFLAGS-tst-codeset.c): New variable.
* intl/tst-codeset.sh: New file.
* intl/tstcodeset.po: New file.
* intl/tst-codeset.c: New file.
* locale/findlocale.c (_nl_find_locale): Update _nl_make_l10nflist
calls.
2001-03-17 Bruno Haible <haible@clisp.cons.org>
* intl/loadmsgcat.c (_nl_load_domain) [!_LIBC]: Use fstat, not fstat64.
2001-03-17 Bruno Haible <haible@clisp.cons.org>
* intl/gettextP.h (struct expression): Add operators lnot, less_than,
greater_than, less_or_equal, greater_or_equal. Replace args2/args3
union by a 'nargs' counter and an 'args[]' array.
* intl/plural.y: Don't include stdarg.h.
(new_exp): Take an array of arguments instead of varargs.
(new_exp_0, new_exp_1, new_exp_2, new_exp_3): New functions.
('?' ':'): Make right-associative.
(EQUOP2): New token, replaces '=' and '!'.
(CMPOP2): New token.
(ADDOP2): New token, replaces '+' and '-'.
(MULOP2): New token, replaces '*', '/' and '%'.
('!'): New token.
(exp): Add rules for CMPOP2 and '!'. Don't call YYABORT.
(start): Call YYABORT here.
(FREE_EXPRESSION): Update.
(yylex): Don't skip "\\n". Recognize comparison and '!' operators.
Update for new token symbols.
* intl/loadmsgcat.c (plvar, plone, germanic_plural,
init_germanic_plural): Update.
* intl/dcigettext.c (_nl_find_msg): Optimize for space.
(plural_eval): Recognize comparison and '!' operators. Optimize for
space.
2001-03-10 Bruno Haible <haible@clisp.cons.org>
* intl/loadmsgcat.c (_nl_load_domain): locale_charset() doesn't return
NULL any more.
2001-01-05 Bruno Haible <haible@clisp.cons.org>
* intl/loadmsgcat.c: Include headers needed for alloca().
(freea): New macro.
(_nl_load_domain): Add fallback code for platforms lacking alloca.
* intl/localealias.c: (ADD_BLOCK, FREE_BLOCK): Remove macros.
(freea): New macro.
(read_alias_file): Simplify fallback code for platforms lacking
alloca.
2001-01-07 Bruno Haible <haible@clisp.cons.org>
* intl/gettextP.h (__gettextdebug): Remove declaration.
(__gettext_free_exp, __gettextparse): Convert prototype to K&R C
syntax.
(gettext_free_exp__, gettextparse__): New non-libc declarations.
* intl/plural.y [!_LIBC]: Define gettextparse__, gettext_free_exp__,
not __gettextparse, __gettext_free_exp.
* intl/loadmsgcat.c [!_LIBC]: Use gettextparse__, not __gettextparse.
2001-02-24 Bruno Haible <haible@clisp.cons.org>
* intl/dcigettext.c: Update comment about HAVE_LOCALE_NULL.
2001-01-05 Bruno Haible <haible@clisp.cons.org>
* intl/loadmsgcat.c (_nl_load_domain): Add fallback code for platforms
lacking strtoul, like SunOS4.
2001-01-05 Bruno Haible <haible@clisp.cons.org>
* intl/l10nflist.c (_nl_normalize_codeset): Use tolower, not _tolower.
2001-01-05 Bruno Haible <haible@clisp.cons.org>
* intl/bindtextdom.c (set_binding_values): Convert prototype to K&R C
syntax.
* intl/dcigettext.c (transcmp): Convert to K&R C syntax.
* intl/explodename.c (_nl_find_language): Convert to K&R C syntax.
* intl/plural.y (__gettext_free_exp, yylex, yyerror): Convert to K&R C
syntax.
2001-01-07 Bruno Haible <haible@clisp.cons.org>
* intl/gettextP.h (gettext__, dgettext__, dcgettext__, textdomain__,
bindtextdomain__, bind_textdomain_codeset__): New declarations, from
old libgettext.h.
* intl/bindtextdom.c: Include libgnuintl.h instead of libgettext.h.
* intl/dcgettext.c: Likewise.
* intl/dcigettext.c: Likewise.
* intl/dcngettext.c: Likewise.
* intl/dngettext.c: Likewise.
* intl/finddomain.c: Likewise.
* intl/ngettext.c: Likewise.
* intl/textdomain.c: Likewise.
* intl/dgettext.c: Include libgnuintl.h instead of libgettext.h.
Include gettextP.h.
* intl/gettext.c: Likewise. Don't include locale.h.
2001-03-17 Bruno Haible <haible@clisp.cons.org>
* intl/gettextP.h (ZERO): New macro.
(struct binding): Always use ZERO.
* intl/bindtextdom.c (offsetof): Provide fallback for platforms that
lack it, like SunOS4.
(set_binding_values): Use offsetof, not sizeof.
* intl/dcigettext.c (offsetof): Provide fallback for platforms that
lack it, like SunOS4.
(ZERO): Remove macro.
(struct transmem_list): Use ZERO.
(DCIGETTEXT): Use offsetof, not sizeof.
2001-03-17 Bruno Haible <haible@clisp.cons.org>
* intl/gettextP.h: Include <stddef.h>. Include gettext.h, for
nls_uint32.
* intl/bindtextdom.c: Don't include gettext.h.
* intl/dcgettext.c: Likewise.
* intl/dcigettext.c: Likewise.
* intl/dcngettext.c: Likewise.
* intl/dngettext.c: Likewise.
* intl/finddomain.c: Likewise.
* intl/localealias.c: Likewise.
* intl/ngettext.c: Likewise.
* intl/plural.y: Likewise.
* intl/textdomain.c: Likewise.
2001-03-17 Bruno Haible <haible@clisp.cons.org>
* intl/gettext.h: Don't include <stdio.h>.
2001-03-17 Bruno Haible <haible@clisp.cons.org>
* intl/Makefile (CPPFLAGS): Set LOCALEDIR instead of GNULOCALEDIR.
* intl/dcigettext.c (_nl_default_dirname): Initialize with LOCALEDIR.
2000-11-15 Ulrich Drepper <drepper@redhat.com>
* intl/Makefile: tst-gettext2.sh does not need a third parameter.
* intl/tst-gettext2.sh: Copy locale data. Adjust LOCPATH. Verify
output of program.
* intl/tst-gettext2.c: Set C locale if setting other locale
failed. Use gettext() not _().
* locale/setlocale.c: Increment _nl_msg_cat_cntr whenever we
successfully loaded a new locale.
2000-11-13 Andreas Jaeger <aj@suse.de>
* configure.in: Require gcc 2.95 or newer.
2000-11-15 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/paths.h: Adjust for FHS.
Patch by Arkadiusz Miskiewicz <misiek@pld.ORG.PL>.
2000-11-11 Jim Meyering <meyering@lucent.com>
* string/strndup.c (strndup): Cast return value to `char *'.
2000-11-15 Jim Meyering <meyering@ascend.com>
* sysdeps/generic/memchr.c: Remove some useless parentheses.
[HAVE_STDLIB_H || defined _LIBC]: Include <stdlib.h>.
[HAVE_BP_SYM_H || defined _LIBC]: Guard inclusion of bp-sym.h.
[! (HAVE_BP_SYM_H || defined _LIBC)] (BP_SYM): Define as no-op.
Also #undef __memchr.
Use `weak_alias' only if it's defined.
2000-11-10 H.J. Lu <hjl@gnu.org>
* Makefile.in (install): Set LANGUAGE=C LC_ALL=C.
* locale/findlocale.c (free_mem): We can remove NODELETE marked
data, just not the C locale data.
* intl/tst-gettext.c: Use setlocale() in addition to setting envvar.
* intl/tst-gettext.sh: Copy locale data if necessary.
* intl/Makefile (generated-dirs): Add localedir.
* intl/dcigettext.c (guess_category_value): For libc always use
the setlocale() method.
* intl/Makefile: Add rules to build, run and, distribute tst-gettext2.
* intl/tst-gettext2.c: New file.
* intl/tst-gettext2.sh: New file.
* intl/tstlang1.po: New file.
* intl/tstlang2.po: New file.
Patch by Andreas Jaeger <aj@suse.de>.
2000-10-26 GOTO Masanori <gotom@debian.or.jp>
* intl/locale.alias: Add ja_JP.ujis alias.
2000-10-30 Ulrich Drepper <drepper@redhat.com>
