The old code uses errno as the primary indicator for success or
failure. This is wrong because errno is only set for specific
combinations of the status return value and the h_errno variable.
This simplifies the code because it is not necessary to propagate the
temporary h_errno value to the thread-local variable. It also increases
compatibility with NSS modules which update only one of the two places.
This patch consolidates all the non cancellable pause calls to use
the __pause_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full): Replace
pause_not_cancel with __pause_nocancel.
* sysdeps/generic/not-cancel.h (pause_not_cancel): Remove macro.
(__pause_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (pause_not_cancel): Remove
macro.
(__pause_nocancel): New prototype.
* sysdeps/unix/sysv/linux/pause.c (__pause_nocancel): New function.
Mark internal nss symbols with attribute_hidden to allow direct access
within libc.so and libc.a without using GOT nor PLT.
Tested on x86-64 with and without --disable-nscd.
[BZ #18822]
* grp/initgroups.c (__nss_group_database): Removed.
(__nss_initgroups_database): Likewise.
* nscd/gai.c (__nss_hosts_database): Likewise.
* nss/XXX-lookup.c (DATABASE_NAME_SYMBOL): Likewise.
* posix/tst-rfc3484-2.c (__nss_hosts_database): Likewise.
* posix/tst-rfc3484-3.c (__nss_hosts_database): Likewise.
* posix/tst-rfc3484.c (__nss_hosts_database): Likewise.
* sysdeps/posix/getaddrinfo.c (__nss_hosts_database): Likewise.
* nss/getXXent.c (INTERNAL (REENTRANT_GETNAME)): Add
attribute_hidden.
* nss/nsswitch.c (__nss_database_custom): Define only if
USE_NSCD is defined.
(__nss_configure_lookup): Use __nss_database_custom only if
USE_NSCD is defined.
* nss/nsswitch.h (__nss_database_custom): Declare only if
USE_NSCD is defined. Add attribute_hidden.
(__nss_setent): Add attribute_hidden.
(__nss_endent): Likewise.
(__nss_getent_r): Likewise.
(__nss_getent): Likewise.
(DEFINE_DATABASE): Declare __nss_##arg##_database.
This patch consolidates all the non cancellable openat{64} calls to use
the __openat{64}_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (openat_not_cancel): Remove macro.
(openat_not_cancel_3): Likewise.
(openat64_not_cancel_3): Likewise).
(openat_not_cancel_3): Likewise).
* sysdeps/unix/sysv/linux/not-cancel.h (openat_not_cancel): Remove
macro.
(openat_not_cancel_3): Likewise.
(openat64_not_cancel): Likewise.
(openat64_not_cancel_3): Likewise.
* sysdeps/unix/sysv/linux/openat.c (__openat_nocancel): New function.
* sysdeps/unix/sysv/linux/openat64.c (__openat64_nocancel): Likewise.
* io/ftw.c (open_dir_stream): Replace openat{64}_not_cancel{_3} with
__open{64}_nocancel.
* sysdeps/mach/hurd/opendir.c (__opendirat): Likewise.
* sysdeps/posix/getcwd.c (__getcwd): Likewise.
* sysdeps/posix/opendir.c (__opendirat): Likewise.
This patch consolidates all the non cancellable write calls to use
the __write_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (write_not_cancel): Remove macro.
(__write_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (__write_nocancel):
Rewrite as a function prototype.
(write_not_cancel): Remove macro.
* sysdeps/unix/sysv/linux/write.c (__write_nocancel): New function.
* gmon/gmon.c (ERR): Replace write_not_cancel with __write_nocancel.
(write_gmon): Likewise.
* libio/fileops.c (_IO_new_file_write): Likewise.
* login/utmp_file.c (pututline_file): Likewise.
(updwtmp_file): Likewise.
* stdio-common/psiginfo.c (psiginfo): Likewise.
* sysdeps/posix/spawni.c (__spawni_child): Likewise.
* sysdeps/unix/sysv/linux/gethostid.c (sethostid): Likewise.
* sysdeps/unix/sysv/linux/libc_fatal.c (backtrace_and_maps):
Likewise.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np):
Likewise.
Different than other architectures hppa-linux-gnu define different values
for ENOTSUP and EOPNOTSUPP, where the later is a Linux specific one.
This leads to tst-preadwritev{64}v2 tests failures:
$ ./testrun.sh misc/tst-preadvwritev2
error: tst-preadvwritev2-common.c:35: preadv2 failure did not set errno to ENOTSUP (223)
error: 1 test failures
The straightforward fix is to return the POSIX defined ENOTSUP on all
p{read,write}v{64}v2 implementations instead of Linux specific one.
Checked on x86_64-linux-gnu and the tst-preadwritev{64}v2 on
hppa-linux-gnu (although due the installed kernel on my testing system
the pwritev{64}v2 with an invalid flag still fails due a known kernel
issue [1]).
[BZ #21780]
* sysdeps/posix/preadv2.c (preadv2): Use ENOTSUP instead of
EOPNOTSUPP.
* sysdeps/posix/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/posix/pwritev2.c (pwritev2): Likewise.
* sysdeps/posix/pwritev64v2.c (pwritev64v2): Likewise.
* sysdeps/unix/sysv/linux/preadv2.c (preadv2): Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c (preadv64v2): Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c (pwritev2): Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c (pwritev64v2): Likewise.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg00726.html
__libc_argv[0] points to address on stack and __libc_secure_getenv
accesses environment variables which are on stack. We should avoid
accessing stack when stack is corrupted.
This patch also renames function argument in __fortify_fail_abort
from do_backtrace to need_backtrace to avoid confusion with do_backtrace
from enum __libc_message_action.
[BZ #21752]
* debug/fortify_fail.c (__fortify_fail_abort): Don't pass down
__libc_argv[0] if we aren't doing backtrace. Rename do_backtrace
to need_backtrace.
* sysdeps/posix/libc_fatal.c (__libc_message): Don't call
__libc_secure_getenv if we aren't doing backtrace.
__stack_chk_fail is called on corrupted stack. Stack backtrace is very
unreliable against corrupted stack. __libc_message is changed to accept
enum __libc_message_action and call BEFORE_ABORT only if action includes
do_backtrace. __fortify_fail_abort is added to avoid backtrace from
__stack_chk_fail.
[BZ #12189]
* debug/Makefile (CFLAGS-tst-ssp-1.c): New.
(tests): Add tst-ssp-1 if -fstack-protector works.
* debug/fortify_fail.c: Include <stdbool.h>.
(_fortify_fail_abort): New function.
(__fortify_fail): Call _fortify_fail_abort.
(__fortify_fail_abort): Add a hidden definition.
* debug/stack_chk_fail.c: Include <stdbool.h>.
(__stack_chk_fail): Call __fortify_fail_abort, instead of
__fortify_fail.
* debug/tst-ssp-1.c: New file.
* include/stdio.h (__libc_message_action): New enum.
(__libc_message): Replace int with enum __libc_message_action.
(__fortify_fail_abort): New hidden prototype.
* malloc/malloc.c (malloc_printerr): Update __libc_message calls.
* sysdeps/posix/libc_fatal.c (__libc_message): Replace int
with enum __libc_message_action. Call BEFORE_ABORT only if
action includes do_backtrace.
(__libc_fatal): Update __libc_message call.
This patch fix the return value for error conditions for default
posix_spawn (where the errno is expected). It also avoid clobber
errno on fork call.
Checked on x86_64 (with Linux implementation removed).
[BZ# 21697]
* sysdeps/posix/spawni.c (__spawni_child): Fix return value.
(__spawnix): Do not clober errno.
struct resolv_context objects provide a temporary resolver context
which does not change during a name lookup operation. Only when the
outmost context is created, the stub resolver configuration is
verified to be current (at present, only against previous res_init
calls). Subsequent attempts to obtain the context will reuse the
result of the initial verification operation.
struct resolv_context can also be extended in the future to store
data which needs to be deallocated during thread cancellation.
This patch improves the default posix implementation of posix_spawn{p}
and align with Linux one. The main idea is to fix some issues already
fixed in Linux code, and deprecated vfork internal usage (source of
various bug reports). In a short:
- It moves POSIX_SPAWN_USEVFORK usage and sets it a no-op. Since
the process that actually spawn the new process do not share
memory with parent (with vfork), it fixes BZ#14750 for this
implementation.
- It uses a pipe to correctly obtain the return upon failure
of execution (BZ#18433).
- It correctly enable/disable asynchronous cancellation (checked
on ptl/tst-exec5.c).
- It correctly disable/enable signal handling.
Using this version instead of Linux shows only one regression,
posix/tst-spawn3, because of pipe2 usage which increase total
number of file descriptor.
* sysdeps/posix/spawni.c (__spawni_child): New function.
(__spawni): Rename to __spawnix.
Many callers of __res_maybe_init also call _res_hconf_init.
Additional calls to the latter do not hurt because the function
does its work only once. (/etc/hosts.conf is not reloaded or
even checked for changes.) This means that we can simplify the
code by calling _res_hconf_init directly from __res_vinit.
A further simplification could eliminate the canon variable in
gaih_inet and replace it with canonbuf. However, canonbuf is
used as a flag in the nscd code, which makes this somewhat
non-straightforward.
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
Currently all architectures but microblaze use wire-up syscall for
p{readv,write}v. Microblaze still uses the syscall emulation using
sysdep/posix/p{readv,writev}.c and it was reported in some ocasions
[1] [2] that it might have some issues with some linux specific
usage (mainly with O_DIRECT and the alignment requirement).
Although it is not an issue for virtually all the system, this
patch refactors the sysdeps/posix p{read,write}v syscall to avoid
such issue (by using posix_memalign on the buffer used on
p{read,write} call) and by refactoring it common files to avoid
the need check on defines to correct set the alias and internal
symbols.
Checked on microblaze-linux-gnu check with run-built-tests=no and
by using the sysdeps/posix implementation on x86_64-linux-gnu (just
for sanity test where it shown no regression).
* sysdeps/posix/preadv.c: Use sysdeps/posix/preadv_common.c.
* sysdeps/posix/preadv64.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64.c: Likewise.
* sysdeps/posix/pwritev.c: Use sysdeps/posix/pwritev_common.c.
* sysdeps/posix/pwritev64.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c: Likewise.
* sysdeps/posix/preadv_common.c: New file.
* sysdeps/posix/pwritev_common.c: Likewise.
[1] http://www.mail-archive.com/qemu-devel@nongnu.org/msg25282.html
[2] https://bugzilla.redhat.com/show_bug.cgi?id=563103#c8
This patch adds support for the POSIX_SPAWN_SETSID flag.
It was recently accepted by the Austin Group:
http://austingroupbugs.net/view.php?id=1044
Checked on x86_64
Daurnimator <quae@daurnimator.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #21340]
* posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests.
* posix/spawn.h: define POSIX_SPAWN_SETSID flag.
* posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to
valid flags.
* posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID.
* sysdeps/mach/hurd/spawni.c (__spawni): Implementation of
POSIX_SPAWN_SETSID.
* sysdeps/posix/spawni.c (__spawni): Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise.
* NEWS: Add note about POSIX_SPAWN_SETSID support.
calls with constant strings shows a small (~10%) performance gain, strdup is
typically used in error reporting code, so not performance critical.
Remove the now unused __need_malloc_and_calloc related defines from stdlib.h.
Rename existing uses of str(n)dup to __str(n)dup so it no longer needs to be
redirected to a builtin. Also building GLIBC with -Os now no longer shows
localplt or linkname space failures (partial fix for BZ #15105 and BZ #19463).
[BZ #15105]
[BZ #19463]
* elf/dl-cache.c (_dl_load_cache_lookup): Use __strdup.
* inet/rcmd.c (rcmd_af): Likewise.
* inet/rexec.c (rexec_af): Likewise.
* intl/dcigettext.c (_LIBC): Likewise.
* intl/finddomain.c (_nl_find_domain): Use strdup expansion.
* locale/loadarchive.c (_nl_load_locale_from_archive): Use __strdup.
* locale/setlocale.c (setlocale): Likewise.
* posix/spawn_faction_addopen.c
(posix_spawn_file_actions_addopen): Likewise.
* stdlib/putenv.c (putenv): Use __strndup.
* sunrpc/svc_simple.c (__registerrpc): Use __strdup.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Use __strdup/__strndup.
* include/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__Need_M_And_C) Remove define/undef.
* stdlib/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__malloc_and_calloc_defined): Remove define.
* string/bits/string2.h (__strdup): Remove define.
(strdup): Likewise.
(__strndup): Likewise.
(strndup): Likewise.
This patch changes shm_open to not act as a cancellation point.
Cancellation is disable at start and reenable in function exit.
It fixes BZ #18243.
Tested on x86_64 and i686.
[BZ #18243]
* rt/Makefile (test): Add tst-shm-cancel.
* rt/tst-shm-cancel.c: New file.
* sysdeps/posix/shm_open.c: Disable asynchronous cancellation.
_res_hconf.initialized was not suitable for use in a multi-threaded
environment due to the lack of atomics and memory barriers. Use of it was
also unnecessary because _res_hconf_init did the right thing by using
__libc_once. This patch fixes the glibc-internal uses by just calling
_res_hconf_init unconditionally, and switches to a release MO atomic store
for _res_hconf.initialized to fix the glibc side of the synchronization
problem (which will maintain backward compatibility, but cannot fix the
lack of acquire MO on any glibc-external loads).
[BZ #20477]
* resolv/res_hconf.c (do_init): Use atomic access.
* resolv/res_hconf.h: Add comments.
* nscd/aicache.c (addhstaiX): Call _res_hconf_init unconditionally.
* nss/getXXbyYY_r.c (REENTRANT_NAME): Likewise.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Likewise.
