Some Linux filesystems might not fully support 64 bit timestamps [1],
which make some Linux specific tests to fail when they check for the
functionality.
This patch adds a new libsupport function, support_path_support_time64,
that returns whether the target file supports or not 64 bit timestamps.
The support is checked by issuing a utimensat and verifying both the
last access and last modification time against a statx call.
The tests that might fail are also adjusted to check the file support
as well:
$ dd if=/dev/zero of=loopbackfile.img bs=100M count=1
1+0 records in
1+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 0,0589568 s, 1,8 GB/s
$ sudo losetup -fP loopbackfile.img
$ mkfs.xfs loopbackfile.img
meta-data=loopbackfile.img isize=512 agcount=4, agsize=6400 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=1368, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
$ mkdir loopfs
$ sudo mount -o loop /dev/loop0 loopfs/
$ sudo chown -R azanella:azanella loopfs
$ TMPDIR=loopfs/ ./testrun.sh misc/tst-utimes
error: ../sysdeps/unix/sysv/linux/tst-utimes.c:55: File loopfs//utimesfECsK1 does not support 64-bit timestamps
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1795576
There's a small chance that a fresh checkout will result in some of
the test-specific container files will have the same timestamp and
size, which breaks the rsync logic in test-container, resulting in
tests running with the wrong support files.
This patch changes the rsync logic to always copy the test-specific
files, which normally would always be copied anyway. The rsync logic
for the testroot itself is unchanged.
The xclock_settime is a wrapper function on the clock_settime syscall
to be used in the test code.
It checks if the GLIBC_TEST_ALLOW_TIME_SETTING env variable is defined
in the environment in which test is executed. If it is not - the test
ends as unsupported. Otherwise, the clock-settime is executed and return
value is assessed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For configurations with cross-compiling equal to 'maybe' or 'no',
ldconfig will not run and thus the ld.so.cache will not be created
on the container testroot.pristine.
This lead to failures on both tst-glibc-hwcaps-prepend-cache and
tst-ldconfig-ld_so_conf-update on environments where the same
compiler can be used to build different ABIs (powerpc and x86 for
instance).
This patch addas a new test-container hook, ldconfig.run, that
triggers a ldconfig execution prior the test execution.
Checked on x86_64-linux-gnu and i686-linux-gnu.
POSIX states that system returned code for failure to execute the shell
shall be as if the shell had terminated using _exit(127). This
behaviour was removed with 5fb7fc9635.
Checked on x86_64-linux-gnu.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Tests such as posix/tst-waitid.c make heavy use of
support_process_state_wait, and thus on non-Linux where it falls back
to sleeping, a 2s sleep makes such test time out, while 1s remains
fine enough.
commit 04deeaa9ea
Author: Lucas A. M. Magalhaes <lamm@linux.ibm.com>
Date: Fri Jul 10 19:41:06 2020 -0300
Fix time/tst-cpuclock1 intermitent failures
has 2 issues:
1. It assumes time_t == long which is false on x32.
2. tst-timespec.c is compiled without -fexcess-precision=standard which
generates incorrect results on i686 in support_timespec_check_in_range:
double ratio = (double)observed_norm / expected_norm;
return (lower_bound <= ratio && ratio <= upper_bound);
This patch does
1. Compile tst-timespec.c with -fexcess-precision=standard.
2. Replace long with time_t.
3. Replace LONG_MIN and LONG_MAX with TYPE_MINIMUM (time_t) and
TYPE_MAXIMUM (time_t).
This test fails intermittently in systems with heavy load as
CLOCK_PROCESS_CPUTIME_ID is subject to scheduler pressure. Thus the
test boundaries were relaxed to keep it from failing on such systems.
A refactor of the spent time checking was made with some support
functions. With the advantage to representing time jitter in percent
of the target.
The values used by the test boundaries are all empirical.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When detecting hole support, we write at 16MiB, and filesystems will
typically need two levels of data to record that. On filesystems with
8KB block, the two indirection blocks will require a total of 16KB
overhead, thus 32 512-byte sectors.
Spotted on GNU/Hurd with a 4KB blocks filesystem, but also happens on Linux
with 4KB or 8KB blocks filesystems.
* support/support_descriptor_supports_holes.c
(support_descriptor_supports_holes): Set block_headroom to 32.
In test-conainer we should set errno to 0 before calling strtol,
and check after with TEST_COMPARE.
In tst-support_capture_subprocess we should set errno to 0 before
checking it after the call to strtol.
Tested on x86_64.
Reviewed-by: DJ Delorie <dj@redhat.com>
Expand the support infrastructure:
- Create $(complocaledir) in the testroot.pristine to support localedef.
- Add the variable $complocaledir to script support.
- Add the script command 'mkdirp'.
All localedef tests which run with default paths need to have the
$(complocaledir) created in testroot.pristine. The localedef binary
will not by itself create the default path, but it will write into
the path. By adding this we can simplify the localedef tests.
The variable $complocaledir is the value of the configured
$(complocaledir) which is the location of the compiled locales that
will be searched by the runtime by default.
The command mkdirp will be available in script setup and will
be equivalent to running `mkdir -p`.
The variable and command can be used to write more complex tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
During testing of localedef running in a minimal container
there were several error cases which were hard to diagnose
since they appeared as strerror (errno) values printed by the
higher level functions. This change adds three new verbose
messages for potential failure paths. The new messages give
the user the opportunity to use -v and display additional
information about why localedef might be failing. I found
these messages useful myself while writing a localedef
container test for --no-hard-links.
Since the changes cleanup the code that handle codeset
normalization we add tst-localedef-path-norm which contains
many sub-tests to verify the correct expected normalization of
codeset strings both when installing to default paths (the
only time normalization is enabled) and installing to absolute
paths. During the refactoring I created at least one
buffer-overflow which valgrind caught, but these tests did not
catch because the exec in the container had a very clean heap
with zero-initialized memory. However, between valgrind and
the tests the results are clean.
The new tst-localedef-path-norm passes without regression on
x86_64.
Change-Id: I28b9f680711ff00252a2cb15625b774cc58ecb9d
The advantage is that the buffer will always contain the number
of characters as returned from the function, which allows one to use
a sequence like
/* No more audit module output. */
line_length = xgetline (&buffer, &buffer_length, fp);
TEST_COMPARE_BLOB ("", 0, buffer, line_length);
to check for an expected EOF, while also reporting any unexpected
extra data encountered.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I'm debugging a situation where lots of tests using test-container fail
and it's possible knowing errno would help understand why.
Reviewed-by: DJ Delorie <dj@redhat.com>
It allows parent process to wait for child state using a polling
strategy over procfs on Linux. The polling is used over ptrace to
avoid the need to handle signals on the target pid and to handle some
system specific limitation (such as YAMA).
The polling has some limitations, such as resource consumption due
the procfs read in a loop and the lack of synchronization after the
state is obtained.
The interface idea is to simplify some sleep synchronization waitid
tests and is to reduce timeouts by replacing arbitrary waits.
exec <path_to_test_binary> [optional_argv_0]
copies test binary to specified location and runs it from
there. If the second argument is provided, that will
be used for argv[0]
cwd <directory>
attempts to chdir(directory) before running test
Note: "cwd" not "cd" as it takes effect just before the
test binary runs, not when it's encountered in the script,
so it can't be used as a path shortcut like "cd" would imply.
cleanup: use xstrdup() instead of strdup()
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This introduces a concept of trusted name servers, for which the
AD bit is passed through to applications. For untrusted name
servers (the default), the AD bit in responses are cleared, to
provide a safe default.
This approach is very similar to the one suggested by Pavel Šimerda
in <https://bugzilla.redhat.com/show_bug.cgi?id=1164339#c15>.
The DNS test framework in support/ is enhanced with support for
setting the AD bit in responses.
Tested on x86_64-linux-gnu.
Change-Id: Ibfe0f7c73ea221c35979842c5c3b6ed486495ccc
PTHREAD_STACK_MIN comes from <limits.h>, so include it explicitly.
However, it is not defined on Hurd, so compensate for that as well.
Built on x86_64-linux-gnu, i686-linux-gnu, i686-gnu.
Change-Id: Ifacc888ef86731c2639721b0932ae59583bd6b3e
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
If WAIT_FOR_DEBUGGER is set to a non-zero value in the environment,
any test that runs will print some useful gdb information and wait
for gdb to attach to it and clear the "wait_for_debugger" variable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On i686-gnu the build is broken:
In file included from support_ptrace.c:22:
../include/sys/prctl.h:2:15: fatal error: sys/prctl.h: No such file or directory
#include_next <sys/prctl.h>
This patch just removes the unused prctl.h inclusion.
ChangeLog:
* support/support_ptrace.c: Remove inclusion of sys/prctl.h.
The testcase forks a child process and runs pldd with PID of
this child. On systems where /proc/sys/kernel/yama/ptrace_scope
differs from zero, pldd will fail with
/usr/bin/pldd: cannot attach to process 3: Operation not permitted
This patch checks if ptrace_scope exists, is zero "classic ptrace permissions"
or one "restricted ptrace". If ptrace_scope exists and has a higher
restriction, then the test is marked as UNSUPPORTED.
The case "restricted ptrace" is handled by rearranging the processes involved
during the test. Now we have the following process tree:
-parent: do_test (performs output checks)
--subprocess 1: pldd_process (becomes pldd via execve)
---subprocess 2: target_process (ptraced via pldd)
ChangeLog:
* elf/tst-pldd.c (do_test): Add UNSUPPORTED check.
Rearrange subprocesses.
(pldd_process): New function.
* support/Makefile (libsupport-routines): Add support_ptrace.
* support/xptrace.h: New file.
* support/support_ptrace.c: Likewise.
nss_db allows for getpwent et al to be called without a set*ent,
but it only works once. After the last get*ent a set*ent is
required to restart, because the end*ent did not properly reset
the module. Resetting it to NULL allows for a proper restart.
If the database doesn't exist, however, end*ent erroniously called
munmap which set errno.
The test case runs "makedb" inside the testroot, so needs selinux
DSOs installed.
The original implementations of test_timespec_before_impl and
test_timespec_equal_or_after in 5198399651
were missing the backslash required for a newline.
Checked on x86_64-linux-gnu.
* support/timespec.c: Add backslash to correct newline in failure
message.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Provide an explicit diagnostic if the length is positive, and
do not just crash with a null pointer dereference. Null pointers
are only valid if the length is zero, so this can only happen with
a faulty test.
The patch print timespec members as intmax_t instead of long int.
It avoid the -Werror=format= build issue on x32:
timespec.c: In function 'test_timespec_before_impl':
timespec.c:32:23: error: format '%ld' expects argument of type 'long int',
but argument 4 has type '__time_t' {aka 'const long long int'} [-Werror=format=]
Checked on x86_64-linux-gnu-x32, x86_64-linux-gnu, and i686-linux-gnu.
* support/timespec.c (test_timespec_before_impl,
test_timespec_equal_or_after_impl): print timespec member as intmax_t
insted of long int.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It adds useful functions for tests that use struct timespec.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* support/timespec.h: New file. Provide timespec helper functions
along with macros in the style of those in check.h.
* support/timespec.c: New file. Implement check functions declared
in support/timespec.h.
* support/timespec-add.c: New file from gnulib containing
timespec_add implementation that handles overflow.
* support/timespec-sub.c: New file from gnulib containing
timespec_sub implementation that handles overflow.
* support/README: Mention timespec.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* support/xclock_gettime.c (xclock_gettime): New file. Provide
clock_gettime wrapper for use in tests that fails the test rather
than returning failure.
* support/xtime.h: New file to declare xclock_gettime.
* support/Makefile: Add xclock_gettime.c.
* support/README: Mention xtime.h.
Its API is similar to support_capture_subprocess, but rather creates a
new process based on the input path and arguments. Under the hoods it
uses posix_spawn to create the new process.
It also allows the use of other support_capture_* functions to check
for expected results and free the resources.
Checked on x86_64-linux-gnu.
* support/Makefile (libsupport-routines): Add support_subprocess,
xposix_spawn, xposix_spawn_file_actions_addclose, and
xposix_spawn_file_actions_adddup2.
(tst-support_capture_subprocess-ARGS): New rule.
* support/capture_subprocess.h (support_capture_subprogram): New
prototype.
* support/support_capture_subprocess.c (support_capture_subprocess):
Refactor to use support_subprocess and support_capture_poll.
(support_capture_subprogram): New function.
* support/tst-support_capture_subprocess.c (write_mode_to_str,
str_to_write_mode, test_common, parse_int, handle_restart,
do_subprocess, do_subprogram, do_multiple_tests): New functions.
(do_test): Add support_capture_subprogram tests.
* support/subprocess.h: New file.
* support/support_subprocess.c: Likewise.
* support/xposix_spawn.c: Likewise.
* support/xposix_spawn_file_actions_addclose.c: Likewise.
* support/xposix_spawn_file_actions_adddup2.c: Likewise.
* support/xspawn.h: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
One of the implicit-fallthrough warnings from compiling glibc with
-Wextra appears to indicate an actual bug: the test-container code
could fall through inappropriately if execlp returns (which only
occurs on error). This patch adds appropriate error handling in this
case to avoid that fall-through.
Tested for x86_64.
* support/test-container.c (recursive_remove): Use FAIL_EXIT1 if
execlp returns.
The alignment of TLS variables is wrong if accessed from within a thread
for architectures with tls variant TLS_TCB_AT_TP.
For the main thread the static tls data is properly aligned.
For other threads the alignment depends on the alignment of the thread
pointer as the static tls data is located relative to this pointer.
This patch adds this alignment for TLS_TCB_AT_TP variants in the same way
as it is already done for TLS_DTV_AT_TP. The thread pointer is also already
properly aligned if the user provides its own stack for the new thread.
This patch extends the testcase nptl/tst-tls1.c in order to check the
alignment of the tls variables and it adds a pthread_create invocation
with a user provided stack.
The test itself is migrated from test-skeleton.c to test-driver.c
and the missing support functions xpthread_attr_setstack and xposix_memalign
are added.
ChangeLog:
[BZ #23403]
* nptl/allocatestack.c (allocate_stack): Align pointer pd for
TLS_TCB_AT_TP tls variant.
* nptl/tst-tls1.c: Migrate to support/test-driver.c.
Add alignment checks.
* support/Makefile (libsupport-routines): Add xposix_memalign and
xpthread_setstack.
* support/support.h: Add xposix_memalign.
* support/xthread.h: Add xpthread_attr_setstack.
* support/xposix_memalign.c: New File.
* support/xpthread_attr_setstack.c: Likewise.
For a full analysis of both the pthread_rwlock_tryrdlock() stall
and the pthread_rwlock_trywrlock() stall see:
https://sourceware.org/bugzilla/show_bug.cgi?id=23844#c14
In the pthread_rwlock_trydlock() function we fail to inspect for
PTHREAD_RWLOCK_FUTEX_USED in __wrphase_futex and wake the waiting
readers.
In the pthread_rwlock_trywrlock() function we write 1 to
__wrphase_futex and loose the setting of the PTHREAD_RWLOCK_FUTEX_USED
bit, again failing to wake waiting readers during unlock.
The fix in the case of pthread_rwlock_trydlock() is to check for
PTHREAD_RWLOCK_FUTEX_USED and wake the readers.
The fix in the case of pthread_rwlock_trywrlock() is to only write
1 to __wrphase_futex if we installed the write phase, since all other
readers would be spinning waiting for this step.
We add two new tests, one exercises the stall for
pthread_rwlock_trywrlock() which is easy to exercise, and one exercises
the stall for pthread_rwlock_trydlock() which is harder to exercise.
The pthread_rwlock_trywrlock() test fails consistently without the fix,
and passes after. The pthread_rwlock_tryrdlock() test fails roughly
5-10% of the time without the fix, and passes all the time after.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Torvald Riegel <triegel@redhat.com>
Signed-off-by: Rik Prohaska <prohaska7@gmail.com>
Co-authored-by: Torvald Riegel <triegel@redhat.com>
Co-authored-by: Rik Prohaska <prohaska7@gmail.com>
If /etc/aliases ends with a continuation line (a line that starts
with whitespace) which does not have a trailing newline character,
the file parser would crash due to a null pointer dereference.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Hurd does not support MAP_NORESERVE and MAP_STACK.
Checked on i686-gnu build.
* support/xsigstack.c (MAP_NORESERVE, MAP_STACK): Define if they
are not defined.
There is general agreement that the very short list of things that ISO
C says you can do in an async signal handler should all work when the
handler is running on an alternate signal stack with only MINSIGSTKSZ
space. This patch adds tests to make sure those things do work.
To facilitate this, there is a new set of test support routines for
setting up alternate signal stacks; see support/xsignal.h for the API.
* support/xsignal.h (xalloc_sigstack, xfree_sigstack)
(xget_sigstack_location): New test support functions.
* support/xsigstack.c: New file, implementing them.
* support/tst-xsigstack.c: New test for them.
* support/Makefile: Update.
* signal/tst-minsigstksz-1.c
* signal/tst-minsigstksz-2.c
* signal/tst-minsigstksz-3.c
* signal/tst-minsigstksz-3a.c
* signal/tst-minsigstksz-4.c: New tests.
* signal/Makefile: Run them.
During postclean.req testing it was found that the fork in the
parent process (after the unshare syscall) would fail with ENOMEM
(see recursive_remove() in test-container.c). While failing with
ENOMEM is certainly unexpected, it is simply easier to refactor
the design and have the parent remain outside of the namespace.
This change moves the postclean.req processing to a distinct
process (the parent) that then forks the test process (which will
have to fork once more to complete uid/gid transitions). When the
test process exists the cleanup process will ensure all files are
deleted when a post clean is requested.
Signed-off-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23948]
* support/test-container.c: Move postclean step to before we
change namespaces.
Signal zero does not terminate a process, so it is safe to use negative
values for signal numbers.
Adjust libio/tst-vtables-common.c to use this new functionality,
instead of determining the termination status for a signal indirectly.
This is sometimes useful to determine if a test truly got stuck, or if
it was making progress (logging information to standard output) and
was merely slow to finish.
Fix the following on 32 bits targets:
support_test_compare_string.c: In function ‘support_test_compare_string’:
support_test_compare_string.c:80:37: error: format ‘%lu’ expects argument of
type ‘long unsigned int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’}
[-Werror=format=]
printf (" string length: %lu bytes\n", left_length);
~~^ ~~~~~~~~~~~
%u
Checked on arm-linux-gnueabihf.
* support/support_test_compare_string.c
(support_test_compare_string): Fix printf format.
On systems without enough random-access memory, stdlib/test-bz22786
will go deeply into swap and time out, even with a substantial
TIMEOUTFACTOR. This commit adds a facility to construct repeating
strings with alias mappings, so that the requirement for physical
memory, and uses it in stdlib/test-bz22786.
The test-container.c file assumes that ld.so is always named
something like /elf/ld-linux-*.
But e.g. on s390x it is named ld64.so.1 or ld.so.1 on s390.
There are other architectures like power or mips with similar names.
This patch introduces the new global variable support_objdir_elf_ldso
which contains the absolute path to the runtime linker used by the
testsuite, e.g. OBJDIR_PATH/elf/ld-linux-x86-64.so.2.
The check in test-container.c is now comparing against this path.
Without this patch, test-container.c is searching invalid files / directories
and fails to find glibc/nss/tst-nss-test3.root/tst-nss-test3.script.
Then the test tst-nss-test3 fails!
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* support/support.h (support_objdir_elf_ldso): New variable.
* support/support_paths.c (support_objdir_elf_ldso): Likewise.
* support/Makefile (CFLAGS-support_paths.c): Add definition
for OBJDIR_ELF_LDSO_PATH.
* support/test-container.c (main): Search for the ld.so
which is also used by the testsuite.
copy_file_range can't be used to copy a file from glibc source directory
to glibc build directory since they may be on different filesystems.
This patch adds xcopy_file_range for cross-device copy.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23597]
* support/Makefile (libsupport-routines): Add
support_copy_file_range and xcopy_file_range.
* support/support.h: Include <sys/types.h>.
(support_copy_file_range): New prototype.
* support/support_copy_file_range.c: New file. Copied and
modified from io/copy_file_range-compat.c.
* support/test-container.c (copy_one_file): Call xcopy_file_rang
instead of copy_file_range.
* support/xcopy_file_range.c: New file.
* support/xunistd.h (xcopy_file_range): New prototype.
