This patch makes the io/tst-fcntl test create its temporary file in
do_prepare not do_test, so that add_temp_name is called in the parent
on the correct file name, as requested in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-10/msg00552.html>. I don't
see any reason in this test that opening the file in the parent should
be problematic.
This patch is explicitly not exhaustive for such issues; other tests
still call add_temp_file in the child. The general issue is noted at
<https://sourceware.org/glibc/wiki/Development_Todo/Master#Use_test-skeleton.c>.
Tested for x86_64 (that this test still passes and no longer leaves a
file behind in /tmp).
* io/tst-fcntl.c (fd): New static variable.
(do_prepare): Open temporary file here....
(do_test): ...not here.
The test io/ftwtest-sh creates a directory that at some points during
the test does not have execute permission. To avoid leaving behind
such a directory that prevents the build directory from being removed
with a simple "rm -rf", it traps various signals to make the directory
executable and remove it before exit. However, this doesn't cover the
case where one of the tests simply fails (which happens with cross
testing if testing on a remote system where the path to the build
directory involves a symlink, or if that remote system fell over
during testing - I think the latter is the case where the directory is
left behind with bad permissions).
This patch makes that test also trap signal 0 (exit) so that the
directory gets properly removed in such failure cases as well.
Tested in both configurations where the test passes and where it fails
to verify that the result of the test is unchanged but the directory
is no longer left behind where it was previously left behind.
* io/ftwtest-sh: Also trap on exit to remove temporary files.
This patch converts a few more function definitions in glibc from
old-style K&R to prototype style. This is sufficient to build and
test on x86_64 and x86 with -Wold-style-definition (I'll test on some
more architectures before proposing the actual addition of
-Wold-style-definition).
Tested for x86_64 and x86 with -Wold-style-definition in use
(testsuite - this patch affects files containing assertions).
* io/fts.c (fts_open): Convert to prototype-style function
definition.
* malloc/mcheck.c (mcheck): Likewise.
(mcheck_pedantic): Likewise.
* posix/regexec.c (re_search_2_stub): Likewise. Use
internal_function.
(re_search_internal): Likewise.
* resolv/res_init.c [RESOLVSORT] (net_mask): Convert to
prototype-style function definition.
* sunrpc/clnt_udp.c (clntudp_call): Likewise.
* sunrpc/pmap_rmt.c (clnt_broadcast): Likewise.
* sunrpc/rpcsvc/rusers.x (xdr_utmp): Likewise.
(xdr_utmpptr): Likewise.
(xdr_utmparr): Likewise.
(xdr_utmpidle): Likewise.
(xdr_utmpidleptr): Likewise.
(xdr_utmpidlearr): Likewise.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
I noticed that glibc testsuite runs left several files behind in /tmp
(or TMPDIR, if different). The problem was testcases that generate a
template for mkstemp / mkstemp64, ending with XXXXXX, then pass that
template to add_temp_file before calling mkstemp / mkstemp64, meaning
that the template ending with XXXXXX is stored in the list of
temporary files to delete (add_temp_file uses strdup so that the
original string doesn't need to stay live), not the actual filename as
determined by mkstemp / mkstemp64. This patch fixes those tests to
call add_temp_file later.
Tested for x86_64 (that the files are no longer left behind by a
testsuite run and the modified tests still pass).
* io/test-lfs.c (do_prepare): Do not call add_temp_file until
after mkstemp64.
* login/tst-utmp.c (do_prepare): Likewise.
* rt/tst-aio.c (do_prepare): Likewise.
* rt/tst-aio64.c (do_prepare): Likewise.
Both open and openat load their last argument 'mode' lazily, using
va_arg() only if O_CREAT is found in oflag. This is wrong, mode is also
necessary if O_TMPFILE is in oflag.
By chance on x86_64, the problem wasn't evident when using O_TMPFILE
with open, as the 3rd argument of open, even when not loaded with
va_arg, is left untouched in RDX, where the syscall expects it.
However, openat was not so lucky, and O_TMPFILE couldn't be used: mode
is the 4th argument, in RCX, but the syscall expects its 4th argument in
a different register than the glibc wrapper, in R10.
Introduce a macro __OPEN_NEEDS_MODE (oflag) to test if either O_CREAT or
O_TMPFILE is set in oflag.
Tested on Linux x86_64.
[BZ #17523]
* io/fcntl.h (__OPEN_NEEDS_MODE): New macro.
* io/bits/fcntl2.h (open): Use it.
(openat): Likewise.
* io/open.c (__libc_open): Likewise.
* io/open64.c (__libc_open64): Likewise.
* io/open64_2.c (__open64_2): Likewise.
* io/open_2.c (__open_2): Likewise.
* io/openat.c (__openat): Likewise.
* io/openat64.c (__openat64): Likewise.
* io/openat64_2.c (__openat64_2): Likewise.
* io/openat_2.c (__openat_2): Likewise.
* sysdeps/mach/hurd/open.c (__libc_open): Likewise.
* sysdeps/mach/hurd/openat.c (__openat): Likewise.
* sysdeps/posix/open64.c (__libc_open64): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
* sysdeps/unix/sysv/linux/generic/open.c (__libc_open): Likewise.
(__open_nocancel): Likewise.
* sysdeps/unix/sysv/linux/generic/open64.c (__libc_open64): Likewise.
* sysdeps/unix/sysv/linux/open64.c (__libc_open64): Likewise.
* sysdeps/unix/sysv/linux/openat.c (__OPENAT): Likewise.
glibc has lots of __libc_* function names that no longer serve any
purpose (are not used for any calls or exported at a public symbol
version). This patch removes __libc_creat. It has the effect of
creat becoming a strong symbol instead of a weak symbol in various
cases, but that's fine; in shared libraries it doesn't matter at all,
while for static linking the only other symbol sometimes defined in
the same object is creat64, and whenever creat64 is a reserved name so
is creat.
Other such cases of unnecessary __libc_* symbols are expected to be
dealt with in separate patches over time.
Tested for x86_64 (testsuite, and that the disassembly of installed
shared libraries is unchanged by the patch).
* include/fcntl.h (__libc_creat): Remove declaration.
* io/creat.c (__libc_creat): Rename to creat.
(creat): Do not define as alias.
* sysdeps/unix/sysv/linux/alpha/creat.c (creat64): Define as alias
of creat instead of __libc_creat.
* sysdeps/unix/sysv/linux/generic/creat.c (__libc_creat): Rename
to creat.
(creat): Do not define as alias.
[__WORDSIZE == 64] (creat64): Define as alias of creat instead of
__libc_creat.
* sysdeps/unix/sysv/linux/syscalls.list (creat): Do not define
__libc_creat name.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (creat):
Likewise.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Tested x86_64.
* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
* ctype/ctype.h [__USE_MISC]: Likewise.
* dirent/dirent.h [__USE_MISC]: Likewise.
* grp/grp.h [__USE_MISC]: Likewise.
* io/fcntl.h [__USE_MISC]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/stdio.h [__USE_MISC]: Likewise.
* posix/unistd.h [__USE_MISC]: Likewise.
* pwd/pwd.h [__USE_MISC]: Likewise.
* stdlib.h [__USE_MISC]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h [__USE_MISC]: Likewise.
* time/time.h [__USE_MISC]: Likewise.
If you rerun "make check" in a tree where some tests have already been
run, it will rerun io/ftwtest-sh because that test uses ftwtest.out,
the same name to which output is redirected, as its internal temporary
file, and then removes it on exit.
Clearly tests should not be removing the files to which their output
is redirected like that. This patch changes the script to use a
different file as its internal temporary file, so the actual output
referenced in the makefile isn't removed.
Tested x86_64.
* io/ftwtest-sh (testout): Change to $tmp/ftwtest-tmp.out.
* io/fcntl.h: Always define mode_t, off_t, pid_t and use these
types for creat, creat64, lockf, posix_fadvise, posix_fallocate.
[__USE_LARGEFILE64 && !__off64_t_defined]: Define off64_t.
[__USE_LARGEFILE64]: Use off64_t in declaration of lock64,
posix_fadvise64, posix_fallocate64.
fopen should set the FD_CLOEXEC flag if requested evenif the kernel does
not support an aotmic operation.
freopen should reuse the file descriptor for the stream. This is
especially important for calls to change the standard streams (stin,
stdout, stderr).
* wcsmbs/wchar.h: mbsnrtowcs, open_wmemstream, wcpcpy, wcpncpy,
wcscasecmp, wcsdup, wcsncasecmp, wcsnlen, wcsnrtombs,
wcscasecmp_l, wcsncasecmp_l, wcscoll_l, and wcsxfrm_l.
* sysdeps/mach/hurd/bits/posix_opt.h: Reset value of macros from
200112L to 200809L.
* sysdeps/unix/sysv/linux/bits/posix_opt.h: Likewise.
* posix/getconf.c (vars): Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT entries.
* bits/confname.h: Add _SC_THREAD_ROBUST_PRIO_INHERIT and
_SC_THREAD_ROBUST_PRIO_PROTECT.
* posix/unistd.h: fexecve is in POSIX 2008.
* time/time.h: strftime_l is in POSIX 2008.
* io/sys/stat.h: futimens is in POSIX 2008.
* string/strings.h: strcasecmp_l and strncasecmp_l are in POSIX 2008.
* string/string.h: stpcpy, stpncpy, strndup, strnlen, strsignal,
strcoll_l, strerror_l, and strxfrm_l are in POSIX 2008.
* stdlib/stdlib.h: mkdtemp is in POSIX 2008.
* sysdeps/unix/sysv/linux/bits/stat.h: Protect UTIME_NOW and
UTIME_OMIT only with __USE_ATFILE.
* sysdeps/unix/sysv/linux/ia64/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/bits/stat.h: Likewise.
* io/sys/stat.h: Move mknodat definition into same conditional as
mknod.
* time/sys/time.h: futimesat is not among the functions accepted
into the POSIX standard.
* rt/Makefile (headers): Add bits/mqueue2.h.
* rt/mqueue.h: Include bits/mqueue2.h if -D_FORTIFY_SOURCE=2,
optimizing with GCC and __va_arg_pack_len is defined.
* rt/bits/mqueue2.h: New file.
* rt/mq_open.c (__mq_open): Renamed from mq_open.
(mq_open): New strong_alias.
(__mq_open_2): New function.
* sysdeps/unix/sysv/linux/mq_open.c (__mq_open): Renamed from mq_open.
(mq_open): New strong_alias.
(__mq_open_2): New function.
* debug/Versions (libc): Export __fortify_fail@@GLIBC_PRIVATE.
* Versions.def (librt): Add GLIBC_2.7 version.
* debug/fortify_fail.c (__fortify_fail): Add libc_hidden_def.
* include/stdio.h (__fortify_fail): Add libc_hidden_proto.
* misc/sys/cdefs.h (__errordecl, __va_arg_pack_len): Define.
* io/fcntl.h: Include bits/fcntl2.h when __va_arg_pack_len
is defined rather than when not C++.
* io/bits/fcntl2.h (__open_alias, __open64_alias, __openat_alias,
__openat64_alias): New redirects.
(__open_too_many_args, __open_missing_mode, __open64_too_many_args,
__open64_missing_mode, __openat_too_many_args, __openat_missing_mode,
__openat64_too_many_args, __openat64_missing_mode): New __errordecls.
(open, open64, openat, openat64): Rewrite as __extern_always_inline
functions instead of function-like macros.
* misc/bits/syslog.h (syslog): When __va_arg_pack is defined,
implement as __extern_always_inline function.
(vsyslog): Define as __extern_always_inline function unconditionally.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf):
When __va_arg_pack is defined, implement as __extern_always_inline
functions.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions unconditionally.
* libio/bits/stdio.h (vprintf): Ifdef out the inline when
bits/stdio2.h will be included.
* wcsmbs/bits/wchar2.h (__swprintf_alias): New redirect.
(swprintf, wprintf, fwprintf): When __va_arg_pack is defined,
implement as __extern_always_inline functions.
(vswprintf, vwprintf, vfwprintf): Define as
__extern_always_inline functions unconditionally.
* debug/tst-chk1.c (do_test): Enable remaining tests for C++.
2007-09-03 Jakub Jelinek <jakub@redhat.com>
* misc/sys/cdefs.h (__extern_inline, __extern_always_inline): Only
define in C++ for GCC 4.3+, in C++ always use __gnu_inline__
attribute.
* include/features.h (__USE_EXTERN_INLINES): Define only when
__extern_inline is defined.
* stdlib/stdlib.h: Include bits/stdlib.h when __extern_always_inline
is defined instead of when not __cplusplus.
* misc/sys/syslog.h: Include bits/syslog.h when __extern_always_inline
is defined instead of when not __cplusplus.
* socket/sys/socket.h: Include bits/socket2.h when
__extern_always_inline is defined instead of when not __cplusplus.
* libio/stdio.h: Include bits/stdio2.h when __extern_always_inline
is defined instead of when not __cplusplus.
* posix/unistd.h: Include bits/unistd.h when __extern_always_inline
is defined instead of when not __cplusplus.
* string/string.h: Include bits/string3.h when __extern_always_inline
is defined instead of when not __cplusplus.
* wcsmbs/wchar.h: Include bits/wchar2.h when __extern_always_inline
is defined instead of when not __cplusplus.
(btowc, wctob): Don't guard the inlines with ifndef __cplusplus.
* io/fcntl.h: Don't include bits/fcntl2.h if __extern_always_inline
is not defined.
* misc/bits/syslog-ldbl.h: Guard *_chk stuff with
defined __extern_always_inline instead of !defined __cplusplus.
* libio/bits/stdio-ldbl.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* misc/bits/syslog.h (syslog): Don't define for C++.
(vsyslog): Use __extern_always_inline function for C++ instead of
a macro.
* libio/bits/stdio.h (__STDIO_INLINE): Define to __extern_inline
whenever that macro is defined.
(vprintf): Don't provide the inline for C++.
(fread_unlocked, fwrite_unlocked): Don't define the macros for C++.
* libio/bits/stdio2.h (sprintf, snprintf, printf, fprintf): Don't
define the macros for C++.
(vsprintf, vsnprintf, vprintf, vfprintf): Define as
__extern_always_inline functions for C++.
* io/sys/stat.h (stat, lstat, fstat, fstatat, mknod, mknodat,
stat64, lstat64, fstat64, fstatat64): Don't define if not
__USE_EXTERN_INLINES.
* wcsmbs/bits/wchar2.h: Fix #error message.
(swprintf, wprintf, fwprintf): Don't define the macros for C++.
(vswprintf, vwprintf, vfwprintf): Define using
__extern_always_inline functions for C++.
* string/bits/string3.h: Don't #undef macros if __cplusplus.
(memcpy, memmove, mempcpy, memset, bcopy, bzero, strcpy, stpcpy,
strncpy, strcat, strncat): Define as __extern_always_inline
functions instead of macros for C++.
* math/bits/cmathcalls.h: Guard __extern_inline routines with
defined __extern_inline.
* sysdeps/alpha/fpu/bits/mathinline.h (__MATH_INLINE): Define
to __extern_inline whenever that macro is defined.
* sysdeps/ia64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/i386/i486/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/bits/string.h (__STRING_INLINE): Likewise.
* sysdeps/s390/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/powerpc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/x86_64/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h (__MATH_INLINE): Likewise.
* sysdeps/unix/sysv/linux/sys/sysmacros.h (gnu_dev_major,
gnu_dev_minor, gnu_dev_makedev): Remove __extern_inline from
prototypes. Only provide __extern_inline routines if
__USE_EXTERN_INLINES.
* debug/Makefile: Add rules to build and run tst-{,lfs}chk{4,5,6}
tests.
* debug/tst-chk1.c (do_prepare, do_test): Allow compilation as C++.
For now avoid some *printf tests in C++. Skip all testing
if __USE_FORTIFY_LEVEL is defined, but __extern_always_inline macro
is not.
* debug/tst-chk4.cc: New file.
* debug/tst-chk5.cc: New file.
* debug/tst-chk6.cc: New file.
* debug/tst-lfschk4.cc: New file.
* debug/tst-lfschk5.cc: New file.
* debug/tst-lfschk6.cc: New file.
* include/wchar.h (__vfwprintf_chk, __vswprintf_chk): Avoid
prototypes in C++.
* include/stdio.h (__sprintf_chk, __snprintf_chk, __vsprintf_chk,
__vsnprintf_chk, __printf_chk, __fprintf_chk, __vprintf_chk,
__vfprintf_chk, __fgets_unlocked_chk, __fgets_chk): Likewise.
__extension__ around the whole statement expression.
2007-08-04 Jakub Jelinek <jakub@redhat.com>
* io/bits/fcntl2.h (open, open64, openat, openat64): Add
__extension__ around the whole statement expression.
* include/fcntl.h: Declare __have_o_cloexec.
* io/have_o_cloexec.c: New file.
* sysdeps/unix/opendir.c (__opendir): Use O_CLOEXEC is available.
(__alloc_dir): If O_CLOEXEC has been used, don't duplicate the
fcntl call if not necessary.
* login/utmp_file.c (setutent_file): Use __have_o_cloexec instead
of local variable.
