Commit Graph

24 Commits

Author SHA1 Message Date
Paul Eggert
dff8da6b3e Update copyright dates with scripts/update-copyrights 2024-01-01 10:53:40 -08:00
Adhemerval Zanella Netto
33237fe83d Remove --enable-tunables configure option
And make always supported.  The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning).  It also simplifies the build permutations.

Changes from v1:
 * Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
   more discussion.
 * Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2023-03-29 14:33:06 -03:00
Joseph Myers
6d7e8eda9b Update copyright dates with scripts/update-copyrights 2023-01-06 21:14:39 +00:00
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Siddhesh Poyarekar
30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Samuel Thibault
28cada0418 htl: Add clock variants
* htl/pt-join.c (__pthread_join): Move implementation to...
(__pthread_join_common): ... new function. Add try, timed and clock support.
(__pthread_join): Reimplement on top of __pthread_join_common.
(__pthread_tryjoin_np, __pthread_timedjoin_np, __pthread_clockjoin_np):
Implement on top of __pthread_join_common.
(pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np): New
aliases.

* hurd/hurdlock.c (__lll_abstimed_wait, __lll_abstimed_xwait,
__lll_abstimed_lock): Check for supported clock.

* sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal):
Add clockid parameter and support it.
(__pthread_cond_timedwait): Pass -1 as clockid.
(__pthread_cond_clockwait): New function.
(pthread_cond_clockwait): New alias.
* sysdeps/htl/pt-cond-wait.c (__pthread_cond_timedwait_internal): Update
prototype.
(__pthread_cond_wait): Pass -1 as clockid.

* sysdeps/htl/pt-rwlock-timedrdlock.c
(__pthread_rwlock_timedrdlock_internal): Add clockid parameter, and
support id.
(__pthread_rwlock_clockrdlock): New function.
(pthread_rwlock_clockrdlock): New alias.
* sysdeps/htl/pt-rwlock-rdlock.c (__pthread_rwlock_timedrdlock_internal): Update
prototype.
(__pthread_rwlock_rdlock): Pass -1 as clockid.

* sysdeps/htl/pt-rwlock-timedwrlock.c
(__pthread_rwlock_timedwrlock_internal): Add clockid parameter, and
support id.
(__pthread_rwlock_clockwrlock): New function.
(pthread_rwlock_clockwrlock): New alias.
* sysdeps/htl/pt-rwlock-wrlock.c (__pthread_rwlock_timedwrlock_internal): Update
prototype.
(__pthread_rwlock_wrlock): Pass -1 as clockid.

* sysdeps/mach/hurd/htl/pt-mutex-timedlock.c (__pthread_mutex_timedlock): Move implementation to
(__pthread_mutex_clocklock): New function with additional clockid
parameter and support it.
(pthread_mutex_clocklock): New alias.
(__pthread_mutex_timedlock): Reimplement on top of __pthread_mutex_clocklock.

* sysdeps/htl/pthread.h (pthread_tryjoin_np, pthread_timedjoin_np,
pthread_clockjoin_np, pthread_mutex_clocklock, pthread_cond_clockwait,
pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock): New prototypes.
* sysdeps/htl/pthreadP.h (__pthread_cond_clockwait): New prototype.

* htl/Versions (GLIBC_2.32): Add pthread_cond_clockwait,
pthread_mutex_clocklock, pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock,
pthread_tryjoin_np, pthread_timedjoin_np, pthread_clockjoin_np.
* sysdeps/mach/hurd/i386/libpthread.abilist (pthread_clockjoin_np,
pthread_cond_clockwait, pthread_mutex_clocklock, pthread_rwlock_clockrdlock,
pthread_rwlock_clockwrlock, pthread_timedjoin_np, pthread_tryjoin_np):
New functions.

* nptl/tst-abstime.c, nptl/tst-join10.c, nptl/tst-join11.c, nptl/tst-join12.c,
nptl/tst-join13.c, nptl/tst-join14.c, nptl/tst-join2.c, nptl/tst-join3.c,
nptl/tst-join8.c, nptl/tst-join9.c, nptl/tst-mutex-errorcheck.c,
nptl/tst-pthread-mutexattr.c, nptl/tst-mutex11.c, nptl/tst-mutex5.c,
nptl/tst-mutex7.c, nptl/tst-mutex7robus.c, nptl/tst-mutex9.c,
nptl/tst-rwlock12.c, nptl/tst-rwlock14.c: Move to sysdeps/pthread.
* sysdeps/pthread/tst-mutex8.c: Move back to nptl.
* nptl/Makefile (tests): Move tst-mutex5, tst-mutex7, tst-mutex7robust,
tst-mutex9, tst-mutex11, tst-rwlock12, tst-rwlock14, tst-join2, tst-join3,
tst-join8, tst-join9 tst-join10, tst-join11, tst-join12, tst-join13, tst-join14,
tst-abstime, tst-mutex-errorcheck, tst-pthread-mutexattr to ...
* sysdeps/pthread/Makefile (tests): ... here.
2020-05-26 00:46:07 +00:00
Samuel Thibault
74159dc58a pthread: Move most mutex tests from nptl to sysdeps/pthread
So they can be checked with htl too.

XFAIL tst-mutex4, for which support is still missing in htl.
2020-02-09 17:17:06 +00:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Stefan Liebler
8724507385 Add runtime check if mutex will be elided in tst-mutex8 testcases.
An elided mutex don't fail destroy. Elision was disabled for the
test nptl/tst-mutex8 in nptl/Makefile. Thus we can run tests which
destroy a locked mutex.

As elision is only disabled for tst-mutex8, the variants
tst-mutex8-static, tst-mutexpi8 and tst-mutexpi8-static are still
failing if lock elision is enabled.

This patch adds a runtime check, if the checked type of mutex will
be elided. This check is using TUNABLE_GET_FULL to determine if
elision is enabled via the tunables framework.
The pthread_mutex_destroy tests are only run if we dont't assume an
elided mutex.

This way, we can run the whole glibc testsuite with or without enabled
lock elision.

ChangeLog:

	* nptl/Makefile (tst-mutex8-ENV): Delete.
	* nptl/tst-mutex8.c (check_type):
	Add runtime check if mutex will be elided.
2018-02-16 09:57:30 +01:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Rogerio Alves
07ed18d26a Add elision tunables
This patch adds several new tunables to control the behavior of
elision on supported platforms[1].   Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection.  This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].

Tested on ppc, ppc64, ppc64le, s390x and x86_64.

[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:

https://patchwork.sourceware.org/patch/10342/

[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell.  Make sense to me integrate this on the patch:

https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html

	* elf/dl-tunables.list: Add elision parameters.
	* manual/tunables.texi: Add entries about elision tunable.
	* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
	Add callback functions to dynamically enable/disable elision.
	Add multiple callbacks functions to set elision parameters.
	Deleted __libc_enable_secure check.
	* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
	* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
	* configure: Regenerated.
	* configure.ac: Option enable_lock_elision was deleted.
	* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
	* config.make.in: Remove references to enable_lock_elision.
	* manual/install.texi: Elision configure option was removed.
	* INSTALL: Regenerated to remove enable_lock_elision.
	* nptl/Makefile:
	Disable elision so it can verify error case for destroying a mutex.
	* sysdeps/powerpc/nptl/elide.h:
	Cleanup ENABLE_LOCK_ELISION check.
	Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
	* sysdeps/s390/configure: Regenerated.
	* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
	* nptl/tst-mutex8.c:
	Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
	* sysdeps/powerpc/powerpc32/sysdep.h:
	Deleted all ENABLE_LOCK_ELISION checks.
	* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
	* sysdeps/powerpc/sysdep.h: Likewise.
	* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
	enable-lock-elision.

Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
2017-12-05 17:48:48 -02:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Maciej W. Rozycki
53247a0b8f nptl: tst-mutex8.c: Handle ENOTSUP PI mutex failure 2013-10-05 00:00:32 +01:00
Andi Kleen
68cc29355f Add minimal test suite changes for elision enabled kernels
tst-mutex5 and 8 test some behaviour not required by POSIX,
that elision changes. This changes these tests to not check
this when elision is enabled at configure time.
2013-07-02 08:46:54 -07:00
Andi Kleen
66c13581af Fix tst-mutexpi8
2013-05-09  Andi Kleen  <ak@linux.intel.com>

	* tst-mutex8.c (do_test): Check for ENABLE_PI.
2013-05-09 16:15:50 +02:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper
6162364368 Update.
2003-06-22  Ulrich Drepper  <drepper@redhat.com>

	* pthreadP.h (__pthread_mutex_init_internal): Mark hidden.
	(__pthread_mutex_lock_internal): Likewise.
	(__pthread_mutex_unlock_internal): Likewise.
	(__pthread_mutex_unlock_usercnt): Declare.
	* pthread_mutex_destroy.c: Always fail if used in any way.
	* pthread_mutex_init.c: Update comment.
	* pthread_mutex_lock.c: If NO_INCR is not defined adjust __nusers.
	* pthread_mutex_timedlock.c: Adjust __nusers.
	* pthread_mutex_trylock.c: Adjust __nusers.
	* pthread_mutex_unlock.c: Old code is in __pthread_mutex_unlock_usercnt
	and public interfaces are wrapper with pass additional parameter.
	__pthread_mutex_unlock_usercnt does not adjust __nusers if second
	parameter zero.
	* tst-mutex8.c: New file.
	* Makefile (tests): Add tst-mutex8.
	* sysdeps/pthread/pthread_cond_timedwait.c: Call
	__pthread_mutex_unlock_usercnt.
	* sysdeps/pthread/pthread_cond_wait.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
	* sysdeps/unix/sysv/linux/pthread_mutex_cond_lock.c: Define NO_INCR.
	* sysdeps/unix/sysv/linux/i386/bits/pthreadtypes.h (pthread_mutex_t):
	Add __nusers.
	* sysdeps/unix/sysv/linux/ia64/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/bits/pthreadtypes.h: Likewise.

	* pthread_mutex_lock.c: Don't store THREAD_ID in __owner, use TID.
	* pthread_mutex_timedlock.c: Likewise.
	* pthread_mutex_trylock.c: Adjust __nusers.
	* pthread_mutex_unlock.c: Compare with TID not THREAD_ID.
	* tst-mutex9.c: New file.
	* Makefile (tests): Add tst-mutex9.
	* sysdeps/i386/tls.h: Remove THREAD_ID definition.
	* sysdeps/ia64/tls.h: Likewise.
	* sysdeps/powerpc/tls.h: Likewise.
	* sysdeps/s390/tls.h: Likewise.
	* sysdeps/sh/tls.h: Likewise.
	* sysdeps/x86_64/tls.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/bits/pthreadtypes.h (pthread_mutex_t):
	Change type of __owner.
	* sysdeps/unix/sysv/linux/ia64/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/bits/pthreadtypes.h: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/bits/pthreadtypes.h: Likewise.
2003-06-22 23:55:27 +00:00