Intel MPX failed to gain wide adoption and has been deprecated for a
while. GCC 9.1 removed Intel MPX support. Linux kernel removed MPX in
2019.
This patch removes the support code from the dynamic loader.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Unicode 14.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 14.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 838
Total removed characters in newly generated WIDTH: 1
(Characters not in WIDTH get width 1 by default, i.e. these have width 1 now.)
removed: <U1734> 0 : eaw=N category=Mc bidi=L name=HANUNOO SIGN PAMUDPOD
That seems intentional, the character had category Mn (Mark, nonspacing) before
and now has Mc (Mark, spacing combining)
Total changed characters in newly generated WIDTH: 0
Total added characters in newly generated WIDTH: 175
C2X adds a macro _PRINTF_NAN_LEN_MAX to <stdio.h>, giving the maximum
length of printf output for a NaN. glibc never includes an
n-char-sequence in its printf output for NaNs, so the correct value
for glibc is 4 ("-nan" or "-NAN"); define the macro accordingly.
This patch makes the macro definition conditional on __GLIBC_USE
(ISOC2X), as is generally done with features from new standard
versions. The name is in the implementation namespace for older
standards, so it would also be possible to define it unconditionally.
Tested for x86_64.
glibc has had exp10 functions since long before they were
standardized; now they are standardized in TS 18661-4 and C2X, they
are also specified there to have a corresponding type-generic macro.
Add one to <tgmath.h>, so fixing bug 26108.
glibc doesn't have other functions from TS 18661-4 yet, but when
added, it will be natural to add the type-generic macro for each
function family at the same time as the functions.
Tested for x86_64.
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
TS 18661-1 and C2X specify predefined macros __STDC_IEC_60559_BFP__
and __STDC_IEC_60559_COMPLEX__, making __STDC_IEC_559__ and
__STDC_IEC_559_COMPLEX__ obsolescent (but still included in the
standard). Now that we have all the functions from TS 18661-1, define
these macros in stdc-predef.h, under the same conditions in which the
older macros are defined, since support for the floating-point
features in TS 18661-1 is now at the same level as that for those in
C11 and before (all library functions and other library APIs present,
but no standard pragma support).
The macros are defined for now with their TS 18661-1 values. C2X will
give them new values (listed as yyyymmL in the working drafts until
the final standard), at which point there will be the question of what
value to use in stdc-predef.h (where it could depend on
__STDC_VERSION__, but not on feature test macros defined by the user).
My inclination then would be to use the C2X value unconditionally
rather than using an older value to indicate TS support, and only have
any C standard version conditionals for the value when subsequent C
standard versions define further values.
(Note that I'm also inclined, when we implement the C2X change to the
return types of fromfp functions, to make that change unconditional
much like the change made to the types of totalorder functions, with
the old version only supported with compat symbols for already-linked
programs and not as an API for newly built objects. So using the C2X
value would also accurately reflect not supporting the versions of
APIs in the TS where those ended up being incompatible with the first
version actually added to the standard.)
Tested for x86_64.
This patch adds the narrowing fused multiply-add functions from TS
18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal,
f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x,
f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128,
f64xfmaf128 for configurations with _Float64x and _Float128;
__f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case
(for calls to ffmal and dfmal when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, especially that for sqrt, so the
description of those generally applies to this patch as well. As with
sqrt, I reused the same test inputs in auto-libm-test-in as for
non-narrowing fma rather than adding extra or separate inputs for
narrowing fma. The tests in libm-test-narrow-fma.inc also follow
those for non-narrowing fma.
The non-narrowing fma has a known bug (bug 6801) that it does not set
errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather
than fixing this or having narrowing fma check for errors when
non-narrowing does not (complicating the cases when narrowing fma can
otherwise be an alias for a non-narrowing function), this patch does
not attempt to check for errors from narrowing fma and set errno; the
CHECK_NARROW_FMA macro is still present, but as a placeholder that
does nothing, and this missing errno setting is considered to be
covered by the existing bug rather than needing a separate open bug.
missing-errno annotations are duly added to many of the
auto-libm-test-in test inputs for fma.
This completes adding all the new functions from TS 18661-1 to glibc,
so will be followed by corresponding stdc-predef.h changes to define
__STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support
for TS 18661-1 will be at a similar level to that for C standard
floating-point facilities up to C11 (pragmas not implemented, but
library functions done). (There are still further changes to be done
to implement changes to the types of fromfp functions from N2548.)
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
Glibc does not provide an interface for debugger to access libraries
loaded in multiple namespaces via dlmopen.
The current rtld-debugger interface is described in the file:
elf/rtld-debugger-interface.txt
under the "Standard debugger interface" heading. This interface only
provides access to the first link-map (LM_ID_BASE).
1. Bump r_version to 2 when multiple namespaces are used. This triggers
the GDB bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=28236
2. Add struct r_debug_extended to extend struct r_debug into a linked-list,
where each element correlates to an unique namespace.
3. Initialize the r_debug_extended structure. Bump r_version to 2 for
the new namespace and add the new namespace to the namespace linked list.
4. Add _dl_debug_update to return the address of struct r_debug' of a
namespace.
5. Add a hidden symbol, _r_debug_extended, for struct r_debug_extended.
6. Provide the symbol, _r_debug, with size of struct r_debug, as an alias
of _r_debug_extended, for programs which reference _r_debug.
This fixes BZ #15971.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch adds the narrowing square root functions from TS 18661-1 /
TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64,
f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x,
f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128,
f64xsqrtf128 for configurations with _Float64x and _Float128;
__f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case
(for calls to fsqrtl and dsqrtl when long double is IEEE binary128).
Corresponding tgmath.h macro support is also added.
The changes are mostly similar to those for the other narrowing
functions previously added, so the description of those generally
applies to this patch as well. However, the not-actually-narrowing
cases (where the two types involved in the function have the same
floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather
than needing a separately built not-actually-narrowing function such
as was needed for add / sub / mul / div. Thus, there is no
__nldbl_dsqrtl name for ldbl-opt because no such name was needed
(whereas the other functions needed such a name since the only other
name for that entry point was e.g. f32xaddf64, not reserved by TS
18661-1); the headers are made to arrange for sqrt to be called in
that case instead.
The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because
they were observed to be needed in GCC 7 testing of
riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/
files added didn't need such DIAG_* in any configuration I tested with
build-many-glibcs.py, but if they do turn out to be needed in more
files with some other configuration / GCC version, they can always be
added there.
I reused the same test inputs in auto-libm-test-in as for
non-narrowing sqrt rather than adding extra or separate inputs for
narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow
those for non-narrowing sqrt.
Tested as followed: natively with the full glibc testsuite for x86_64
(GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC
11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32
hard float, mips64 (all three ABIs, both hard and soft float). The
different GCC versions are to cover the different cases in tgmath.h
and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in
glibc headers, GCC 7 has proper _Float* support, GCC 8 adds
__builtin_tgmath).
We add a new C.UTF-8 locale. This locale is not builtin to glibc, but
is provided as a distinct locale. The locale provides full support for
UTF-8 and this includes full code point sorting via STRCMP-based
collation (strcmp or wcscmp).
The collation uses a new keyword 'codepoint_collation' which drops all
collation rules and generates an empty zero rules collation to enable
STRCMP usage in collation. This ensures that we get full code point
sorting for C.UTF-8 with a minimal 1406 bytes of overhead (LC_COLLATE
structure information and ASCII collating tables).
The new locale is added to SUPPORTED. Minimal test data for specific
code points (minus those not supported by collate-test) is provided in
C.UTF-8.in, and this verifies code point sorting is working reasonably
across the range. The locale was tested manually with the full set of
code points without failure.
The locale is harmonized with locales already shipping in various
downstream distributions. A new tst-iconv9 test is added which verifies
the C.UTF-8 locale is generally usable.
Testing for fnmatch, regexec, and recomp is provided by extending
bug-regex1, bugregex19, bug-regex4, bug-regex6, transbug, tst-fnmatch,
tst-regcomp-truncated, and tst-regex to use C.UTF-8.
Tested on x86_64 or i686 without regression.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Make malloc hooks symbols compat-only so that new applications cannot
link against them and remove the declarations from the API. Also
remove the unused malloc-hooks.h.
Finally, mark all symbols in libc_malloc_debug.so as compat so that
the library cannot be linked against.
Add a note about the deprecation in NEWS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
These deprecated functions are only safe to call from
__malloc_initialize_hook and as a result, are not useful in the
general case. Move the implementations to libc_malloc_debug so that
existing binaries that need it will now have to preload the debug DSO
to work correctly.
This also allows simplification of the core malloc implementation by
dropping all the undumping support code that was added to make
malloc_set_state work.
One known breakage is that of ancient emacs binaries that depend on
this. They will now crash when running with this libc. With
LD_BIND_NOW=1, it will terminate immediately because of not being able
to find malloc_set_state but with lazy binding it will crash in
unpredictable ways. It will need a preloaded libc_malloc_debug.so so
that its initialization hook is executed to allow its malloc
implementation to work properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Make the __morecore and __default_morecore symbols compat-only and
remove their declarations from the API. Also, include morecore.c
directly into malloc.c; this should ideally get merged into malloc in
a future cleanup.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Debugging interfaces: p_*, fp_*, and sym_* could conceivably be
used to produce debug out, but these functions have not been
updated to parse more resource records, so they are not very useful
today. Likewise for ns_sprintrr and ns_sprintrrf. ns_format_ttl and
ns_parse_ttl are related to these.
Internal implementation details: res_isourserver is probably only
useful in the implementation of a stub resolver, and so is
res_nameinquery.
Unclear semantics and bad performance: ns_samedomain, ns_subdomain,
ns_makecanon, ns_samename do textual converions & copies instead of
checking equivalence of the wire format.
inet_neta cannot handle IPv6 addresses.
res_hostalias has been superseded by getaddrinfo with AI_CANONNAME.
hostalias is not thread-safe.
Some functions have int as size arguments instead of size_t, so they
do not follow current coding practices. However, dn_expand and
b64_ntop are somewhat widely used (to name just two examples), so
deprecating them seems problematic.
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
The constant PTHREAD_STACK_MIN may be too small for some processors.
Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When
_DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define
PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed
to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)).
Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to
provide a constant target specific PTHREAD_STACK_MIN value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch adds a way to close a range of file descriptors on
posix_spawn as a new file action. The API is similar to the one
provided by Solaris 11 [1], where the file action causes the all open
file descriptors greater than or equal to input on to be closed when
the new process is spawned.
The function posix_spawn_file_actions_addclosefrom_np is safe to be
implemented by iterating over /proc/self/fd, since the Linux spawni.c
helper process does not use CLONE_FILES, so its has own file descriptor
table and any failure (in /proc operation) aborts the process creation
and returns an error to the caller.
I am aware that this file action might be redundant to the current
approach of POSIX in promoting O_CLOEXEC in more interfaces. However
O_CLOEXEC is still not the default and for some specific usages, the
caller needs to close all possible file descriptors to avoid them
leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK
jspawnhelper [2] (where OpenJDK spawns a helper process to exactly
closes all file descriptors). Most likely any environment which calls
functions that might open file descriptor under the hood and aim to use
posix_spawn might face the same requirement.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] https://docs.oracle.com/cd/E36784_01/html/E36874/posix-spawn-file-actions-addclosefrom-np-3c.html
[2] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
The function closes all open file descriptors greater than or equal to
input argument. Negative values are clamped to 0, i.e, it will close
all file descriptors.
As indicated by the bug report, this is a common symbol provided by
different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although
its has inherent issues with not taking in consideration internal libc
file descriptors (such as syslog), this is also a common feature used
in multiple projects [1][2][3][4][5].
The Linux fallback implementation iterates over /proc and close all
file descriptors sequentially. Although it was raised the questioning
whether getdents on /proc/self/fd might return disjointed entries
when file descriptor are closed; it does not seems the case on my
testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy
is used on different projects [1][2][3][5].
Also, the interface is set a fail-safe meaning that a failure in the
fallback results in a process abort.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
[1] 5238e95759/src/basic/fd-util.c (L217)
[2] ddf4b77e11/src/lxc/start.c (L236)
[3] 9e4f2f3a6b/Modules/_posixsubprocess.c (L220)
[4] 5f47c0613e/src/libstd/sys/unix/process2.rs (L303-L308)
[5] https://github.com/openjdk/jdk/blob/master/src/java.base/unix/native/libjava/childproc.c#L82
It was added on Linux 5.9 (278a5fbaed89) with CLOSE_RANGE_CLOEXEC
added on 5.11 (582f1fb6b721f). Although FreeBSD has added the same
syscall, this only adds the symbol on Linux ports. This syscall is
required to provided a fail-safe way to implement the closefrom
symbol (BZ #10353).
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
The variable and function pair appear to provide a way for users to
set conditional breakpoints in mtrace when a specific address is
returned by the allocator. This can be achieved by using conditional
breakpoints in gdb so it is redundant. There is no documentation of
this interface in the manual either, so it appears to have been a hack
that got added to debug malloc. Deprecate these symbols and do not
call tr_break anymore.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Austin Group issue 62 [1] dropped the async-signal-safe requirement
for fork and provided a async-signal-safe _Fork replacement that
does not run the atfork handlers. It will be included in the next
POSIX standard.
It allow to close a long standing issue to make fork AS-safe (BZ#4737).
As indicated on the bug, besides the internal lock for the atfork
handlers itself; there is no guarantee that the handlers itself will
not introduce more AS-safe issues.
The idea is synchronize fork with the required internal locks to allow
children in multithread processes to use mostly of standard function
(even though POSIX states only AS-safe function should be used). On
signal handles, _Fork should be used intead and only AS-safe functions
should be used.
For testing, the new tst-_Fork only check basic usage. I also added
a new tst-mallocfork3 which uses the same strategy to check for
deadlock of tst-mallocfork2 but using threads instead of subprocesses
(and it does deadlock if it replaces _Fork with fork).
[1] https://austingroupbugs.net/view.php?id=62
The valgrind/helgrind test suite needs a way to make stack dealloction
more prompt, and this feature seems to be generally useful.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.
The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit. The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@rehdat.com>
The usage of signals to implementation pthread cancellation is an
implementation detail and should not be visible through cancellation
entrypoints.
However now that pthread_cancel always send the SIGCANCEL, some
entrypoint might be interruptable and return EINTR to the caller
(for instance on sem_wait).
Using SA_RESTART hides this, since the cancellation handler should
either act uppon cancellation (if asynchronous cancellation is enable)
or ignore the cancellation internal signal.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* NEWS: Don't imply the default will always be 32-bit.
* manual/creature.texi (Feature Test Macros):
Say that _TIME_BITS and _FILE_OFFSET_BITS defaults
may change in future releases.
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Commit 68ab82f566 added support for the scv
syscall ABI on powerpc. Since then systems that have kernel and processor
support started using scv. However adding the proper support for a new syscall
ABI requires changes to several other projects (e.g. qemu, valgrind, strace,
kernel), which are gradually receiving support.
Meanwhile, having a way to disable scv on glibc at build time can be useful for
distros that may encounter conflicts with projects that still do not support the
scv ABI, buying time until proper support is added.
This commit adds a --disable-scv option that disables scv support and uses sc
for all syscalls, like before commit 68ab82f566.
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
ISO C2X has made some changes to the handling of feature test macros
related to features from the floating-point TSes, and to exactly what
such features are present in what headers, that require corresponding
changes in glibc.
* For the few features that were controlled by
__STDC_WANT_IEC_60559_BFP_EXT__ (and the corresponding DFP macro) in
C2X, there is now instead a new feature test macro
__STDC_WANT_IEC_60559_EXT__ covering both binary and decimal FP.
This controls CR_DECIMAL_DIG in <float.h> (provided by GCC; I
implemented support for the new feature test macro for GCC 11) and
the totalorder and payload functions in <math.h>. C2X no longer
says anything about __STDC_WANT_IEC_60559_BFP_EXT__ (so it's
appropriate for that macro to continue to enable exactly the
features from TS 18661-1).
* The SNAN macros for each floating-point type have moved to <float.h>
(and been renamed in the process). Thus, the copies in <math.h>
should only be defined for __STDC_WANT_IEC_60559_BFP_EXT__, not for
C2X.
* The fmaxmag and fminmag functions have been removed (replaced by new
functions for the new min/max operations in IEEE 754-2019). Thus
those should also only be declared for
__STDC_WANT_IEC_60559_BFP_EXT__.
* The _FloatN / _FloatNx handling for the last two points in glibc is
trickier, since __STDC_WANT_IEC_60559_TYPES_EXT__ is still in C2X
(the integration of TS 18661-3 as an Annex, that is, which hasn't
yet been merged into the C standard git repository but has been
accepted by WG14), so C2X with that macro should not declare some
things that are declared for older standards with that macro. The
approach taken here is to provide the declarations (when
__STDC_WANT_IEC_60559_TYPES_EXT__ is enabled) only when (defined
__USE_GNU || !__GLIBC_USE (ISOC2X)), so if C2X features are enabled
then those declarations (that are only in TS 18661-3 and not in C2X)
will only be provided if _GNU_SOURCE is defined as well. Thus
_GNU_SOURCE remains a superset of the TS features as well as of C2X.
Some other somewhat related changes in C2X are not addressed here.
There's an open proposal not to include the fmin and fmax functions
for the _FloatN / _FloatNx types, given the new min/max operations,
which could be handled like the previous point if adopted. And the
fromfp functions have been changed to return a result in floating type
rather than intmax_t / uintmax_t; my inclination there is to treat
that like that change of totalorder type (new symbol versions etc. for
the ABI change; old versions become compat symbols and are no longer
supported as an API).
Tested for x86_64 and x86.
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
It operates similar to execve and it is is already used to implement
fexecve without requiring /proc to be mounted. However, different
than fexecve, if the syscall is not supported by the kernel an error
is returned instead of trying a fallback.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And deprecate it in <pthread.h>, redirecting it to sched_yield
for the time being.
The symbol was moved using scripts/move-symbol-to-libc.py.
No GLIBC_2.34 symbol version is added because of the compatibility
symbol status.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Previously, glibc would pick an arbitrary tmpfs file system from
/proc/mounts if /dev/shm was not available. This could lead to
an unsuitable file system being picked for the backing storage for
shm_open, sem_open, and related functions.
This patch introduces a new function, __shm_get_name, which builds
the file name under the appropriate (now hard-coded) directory. It is
called from the various shm_* and sem_* function. Unlike the
SHM_GET_NAME macro it replaces, the callers handle the return values
and errno updates. shm-directory.c is moved directly into the posix
subdirectory because it can be implemented directly using POSIX
functionality. It resides in libc because it is needed by both
librt and nptl/htl.
In the sem_open implementation, tmpfname is initialized directly
from a string constant. This happens to remove one alloca call.
Checked on x86_64-linux-gnu.
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
