I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Instead of having the arch-specific trampoline setup code detect whether
preemption happened or not, we'd rather pass it the sigaction. In the
future, this may also allow to change sa_flags from post_signal().
SA_SIGINFO is actually just another way of expressing what we were
already passing over with struct sigcontext. This just introduces the
SIGINFO interface and fixes the posix values when that interface is
requested by the application.
This adds _hurd_sigstate_set_global_rcv used by libpthread to enable
POSIX-confirming behavior of signals on a per-thread basis.
This also provides a sigstate destructor _hurd_sigstate_delete, and a
global process signal state, which needs to be locked and check when
global disposition is enabled, thus the addition of _hurd_sigstate_lock
_hurd_sigstate_actions _hurd_sigstate_pending _hurd_sigstate_unlock helpers.
This also updates all the glibc code accordingly.
This also drops support for get_int(INIT_SIGMASK), which did not make sense
any more since we do not have a single signal thread any more.
During fork/spawn, this also reinitializes the child global sigstate's
lock. That cures an issue that would very rarely cause a deadlock in the
child in fork, tries to unlock ss' critical section lock at the end of
fork. This will typically (always?) be observed in /bin/sh, which is not
surprising as that is the foremost caller of fork.
To reproduce an intermediate state, add an endless loop if
_hurd_global_sigstate is locked after __proc_dostop (cast through
volatile); that is, while still being in the fork's parent process.
When that triggers (use the libtool testsuite), the signal thread has
already locked ss (which is _hurd_global_sigstate), and is stuck at
hurdsig.c:685 in post_signal, trying to lock _hurd_siglock (which the
main thread already has locked and keeps locked until after
__task_create). This is the case that ss->thread == MACH_PORT_NULL, that
is, a global signal. In the main thread, between __proc_dostop and
__task_create is the __thread_abort call on the signal thread which would
abort any current kernel operation (but leave ss locked). Later in fork,
in the parent, when _hurd_siglock is unlocked in fork, the parent's
signal thread can proceed and will unlock eventually the global sigstate.
In the client, _hurd_siglock will likewise be unlocked, but the global
sigstate never will be, as the client's signal thread has been configured
to restart execution from _hurd_msgport_receive. Thus, when the child
tries to unlock ss' critical section lock at the end of fork, it will
first lock the global sigstate, will spin trying to lock it, which can
never be successful, and we get our deadlock.
Options seem to be:
* Move the locking of _hurd_siglock earlier in post_signal -- but that
may generally impact performance, if this locking isn't generally
needed anyway?
On the other hand, would it actually make sense to wait here until we
are not any longer in a critical section (which is meant to disable
signal delivery anyway (but not for preempted signals?))?
* Clear the global sigstate in the fork's child with the rationale that
we're anyway restarting the signal thread from a clean state. This
has now been implemented.
Why has this problem not been observed before Jérémie's patches? (Or has
it? Perhaps even more rarely?) In _S_msg_sig_post, the signal is now
posted to a *global receiver thread*, whereas previously it was posted to
the *designated signal-receiving thread*. The latter one was in a
critical section in fork, so didn't try to handle the signal until after
leaving the critical section? (Not completely analyzed and verified.)
Another question is what the signal is that is being received
during/around the time __proc_dostop executes.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Always check
for interrupted code being with esp pointing at mach_msg arguments, even
when using an altstack. If we need to abort the RPC we will need
this.
This gets rid of a lot of kludge and gets closer to other ports.
* hurd/Makefile (headers): Remove threadvar.h.
(inline-headers): Remove threadvar.h.
* hurd/Versions (GLIBC_2.0: Remove __hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables,
__hurd_threadvar_max, __hurd_errno_location.
(HURD_CTHREADS_0.3): Add pthread_getattr_np, pthread_attr_getstack.
* hurd/hurd/signal.h: Do not include <hurd/threadvar.h>.
(_hurd_self_sigstate): Use THREAD_SELF to get _hurd_sigstate.
(_HURD_SIGNAL_H_EXTERN_INLINE): Use THREAD_SELF to get _hurd_sigstate,
unless TLS is not initialized yet, in which case we do not need a
critical section yet anyway.
* hurd/hurd/threadvar.h: Include <tls.h>, do not include
<machine-sp.h>.
(__hurd_sigthread_variables, __hurd_threadvar_max): Remove variables
declarations.
(__hurd_threadvar_index): Remove enum.
(_HURD_THREADVAR_H_EXTERN_INLINE): Remove macro.
(__hurd_threadvar_location_from_sp,__hurd_threadvar_location): Remove
inlines.
(__hurd_reply_port0): New variable declaration.
(__hurd_local_reply_port): New macro.
* hurd/hurdsig.c (__hurd_sigthread_variables): Remove variable.
(interrupted_reply_port_location): Add thread_t parameter. Use it
with THREAD_TCB to access thread-local variables.
(_hurdsig_abort_rpcs): Pass ss->thread to
interrupted_reply_port_location.
(_hurd_internal_post_signal): Likewise.
(_hurdsig_init): Use presence of cthread_fork instead of
__hurd_threadvar_stack_mask to start signal thread by hand.
Remove signal thread threadvar initialization.
* hurd/hurdstartup.c: Do not include <hurd/threadvar.h>
* hurd/sigunwind.c: Include <hurd/threadvar.h>
(_hurdsig_longjmp_from_handler): Use __hurd_local_reply_port instead
of threadvar.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add
__libc_lock_self0.
(ld.GLIBC_2.0): Remove __hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables.
(ld.GLIBC_PRIVATE): Add __libc_lock_self0.
* sysdeps/mach/hurd/cthreads.c: Add __libc_lock_self0.
* sysdeps/mach/hurd/dl-sysdep.c (errno, __hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables, threadvars,
__hurd_threadvar_stack_offset, __hurd_threadvar_stack_mask): Do not
define variables.
* sysdeps/mach/hurd/errno-loc.c: Do not include <errno.h> and
<hurd/threadvar.h>.
[IS_IN(rtld)] (rtld_errno): New variable.
[IS_IN(rtld)] (__errno_location): New weak function.
[!IS_IN(rtld)]: Include "../../../csu/errno-loc.c".
* sysdeps/mach/hurd/errno.c: Remove file.
* sysdeps/mach/hurd/fork.c: Include <hurd/threadvar.h>
(__fork): Remove THREADVAR_SPACE macro and its use.
* sysdeps/mach/hurd/i386/init-first.c (__hurd_threadvar_max): Remove
variable.
(init): Do not initialize threadvar.
* sysdeps/mach/hurd/i386/libc.abilist (__hurd_threadvar_max): Remove
symbol.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn): Use
__hurd_local_reply_port instead of threadvar.
* sysdeps/mach/hurd/i386/tls.h (tcbhead_t): Add reply_port and
_hurd_sigstate fields.
(HURD_DESC_TLS, __LIBC_NO_TLS, THREAD_TCB): New macro.
* sysdeps/mach/hurd/i386/trampoline.c: Remove outdated comment.
* sysdeps/mach/hurd/libc-lock.h: Do not include <hurd/threadvar.h>.
(__libc_lock_owner_self): Use &__libc_lock_self0 and THREAD_SELF
instead of threadvar.
* sysdeps/mach/hurd/libc-tsd.h: Remove file.
* sysdeps/mach/hurd/mig-reply.c (GETPORT, reply_port): Remove macros.
(use_threadvar, global_reply_port): Remove variables.
(__hurd_reply_port0): New variable.
(__mig_get_reply_port): Use __hurd_local_reply_port and
__hurd_reply_port0 instead of threadvar.
(__mig_dealloc_reply_port): Likewise.
(__mig_init): Do not initialize threadvar.
* sysdeps/mach/hurd/profil.c: Fix comment.
* sysdeps/generic/thread_state.h (MACHINE_NEW_THREAD_STATE_FLAVOR):
Define macro.
* sysdeps/mach/thread_state.h (MACHINE_THREAD_STATE_FIX_NEW): New macro.
* sysdeps/mach/i386/thread_state.h
(MACHINE_NEW_THREAD_STATE_FLAVOR): New macro, defined to
i386_THREAD_STATE.
(MACHINE_THREAD_STATE_FLAVOR): Define to i386_REGS_SEGS_STATE instead of
i386_THREAD_STATE.
(MACHINE_THREAD_STATE_FIX_NEW): New macro, reads segments.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Use
i386_REGS_SEGS_STATE instead of i386_THREAD_STATE.
* sysdeps/mach/hurd/i386/tls.h (TCB_ALIGNMENT, HURD_SEL_LDT): New
macros.
(_hurd_tls_fork): Add original thread parameter, Duplicate existing LDT
descriptor instead of creating a new one.
(_hurd_tls_new): New function, creates a new descriptor and updates tcb.
* mach/setup-thread.c: Include <ldsodefs.h>.
(__mach_setup_thread): Call _dl_allocate_tls, pass
MACHINE_NEW_THREAD_STATE_FLAVOR to __thread_set_state instead of
MACHINE_THREAD_STATE_FLAVOR, before getting
MACHINE_THREAD_STATE_FLAVOR, calling _hurd_tls_new, and setting
MACHINE_THREAD_STATE_FLAVOR with the result.
* hurd/hurdfault.c (_hurdsig_fault_init): Call
MACHINE_THREAD_STATE_FIX_NEW.
* sysdeps/mach/hurd/fork.c (__fork): Call _hurd_tls_fork for sigthread
too. Add original thread parameter.
* sysdeps/mach/hurd/Makefile ($(common-objpfx)errnos.d): Depend on
libc-modules.h
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Remove
unused declaration of _hurd_intr_rpc_msg_in_trap.
* mach/mach_init.c (__mach_init): Test whether HAVE_HOST_PAGE_SIZE is
defined instead of whether it is non-zero.
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Use "+m"
input constraint instead of both input and output constraint. Use ecx
clobber instead of %ecx.
* sysdeps/mach/hurd/malloc-machine.h (mutex_init, mutex_lock,
mutex_unlock): Use a statement expression instead of an expression list.
* sysdeps/mach/hurd/setitimer.c (_hurd_itimer_thread_stack_size): Set
type to vm_size_t instead of vm_address_t.
* sysdeps/mach/hurd/fork.c (__fork): Test whether STACK_GROWTH_UP is
defined instead of whether it is non-zero.
* hurd/hurd/ioctl.h (_hurd_locked_install_cttyid): New declaration.
* sysdeps/mach/hurd/setsid.c: Include <hurd/ioctl.h>.
* sysdeps/mach/hurd/mmap.c (__mmap): Use 0 instead of NULL for
comparisons with mapaddr.
* nscd/nscd-client.h: Include <time.h>.
* sysdeps/mach/hurd/dl-sysdep.c (fmh): Pass vm_offset_t dummy
9th parameter to __vm_region instead of int.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler):
Clear DF bit in thread state's eflags.
Reported by Samuel Thibault <samuel.thibault@ens-lyon.org>.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
* sysdeps/mach/hurd/i386/init-first.c (init): Move the inline
assembler code to switch stacks and call init1 outside this
function. Inside `init' the code was optimized away by gcc
2.95 since it was "clearly" unreachable.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler):
Do something similar for the trampoline code.
1998-07-31 17:59 Ulrich Drepper <drepper@cygnus.com>
* sysdeps/generic/bits/byteswap.h: Fix problems with side effects.
* manual/filesys.texi: Document truncate and ftruncate.
Patch by Michael Deutschmann <michael@talamasca.wkpowerlink.com>.
* shadow/putspent.c: Lock stream while generating the output.
* sunrpc/clnt_unix.c: Use ucred instead of cmsgcred again.
(__msgwrite): Rewrite accordingly.
* sunrpc/svc_unix.c: Likewise.
* sysdeps/unix/sysv/linux/Dist: Remove __recvmsg.S and __sendmsg.S.
* sysdeps/unix/sysv/linux/Makefile [$(subdir)==socket]
(sysdep_routines): Remove __sendmsg and __recvmsg.
* sysdeps/unix/sysv/linux/__recvmsg.S: Removed.
* sysdeps/unix/sysv/linux/__sendmsg.S: Removed.
* sysdeps/unix/sysv/linux/recvmsg.c: Removed.
* sysdeps/unix/sysv/linux/sendmsg.c: Removed.
* sysdeps/unix/sysv/linux/recvmsg.S: New file.
* sysdeps/unix/sysv/linux/sendmsg.S: New file.
* sysdeps/unix/sysv/linux/bits/socket.h: Define SCM_CREDENTIALS and
struct ucred. Remove struct cmsgcred.
Patches by Thorsten Kukuk.
1998-08-03 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* inet/rcmd.c (__ivaliduser): Allow '#' as comment character.
1998-08-08 14:42 Ulrich Drepper <drepper@cygnus.com>
* argp/argp-help.c: Prepare to be used outside glibc without gcc by
adding usual alloca cruft.
Reported by Eleftherios Gkioulekas <lf@amath.washington.edu>.
1998-04-05 Jim Meyering <meyering@ascend.com>
* lib/regex.c (WIDE_CHAR_SUPPORT): Define.
This now depends on HAVE_BTOWC so systems that lack btowc (like
solaris-2.5.1) don't lose.
1998-08-07 Mark Kettenis <kettenis@phys.uva.nl>
* sysdeps/generic/bits/sigaction.h: Remove definition of SA_DISABLE.
* sysdeps/generic/bits/sigstack.h: Define SS_DISABLE, SS_ONSTACK,
MINSIGSTKZ and SIGSTKSZ. Definitions match BSD.
* hurd/sigunwind.c (_hurdsig_longjmp_from_handler): Use SS_ONSTACK
instead of SA_ONSTACK.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Renamed from
sigaltstack, and created a weak alias. Use SS_DISABLE and
SS_ONSTACK instead of SA_DISABLE and SA_ONSTACK.
* sysdeps/mach/hurd/sigstack.c (sigstack): Use SS_ONSTACK instead
of SA_ONSTACK. Call __sigaltstack instead of sigaltstack.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn): Use SS_ONSTACK
instead of SA_ONSTACK.
* sysdeps/mach/hurd/alpha/sigreturn.c (__sigreturn): Likewise.
* sysdeps/mach/hurd/mips/sigreturn.c (__sigreturn): Likewise.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler):
Use SS_DISABLE instead of SA_DISABLE. Use SS_ONSTACK instead of
SA_ONSTACK where appropriate.
* sysdeps/mach/hurd/alpha/trampoline.c (_hurd_setup_sighandler):
Likewise.
* sysdeps/mach/hurd/hppa/trampoline.c (_hurd_setup_sighandler):
Likewise.
* sysdeps/mach/hurd/mips/trampoline.c (_hurd_setup_sighandler):
Likewise.
* manual/signal.texi (Signal Stack): Talk about SS_DISABLE and
SS_ONSTACK instead of SA_DISABLE and SA_ONSTACK in discussion of
the `ss_flags' member of `struct sigaltstack'.
1998-08-05 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* libio/Makefile (routines) [$(versioning)=yes]: Add oldtmpfile.
(shared-only-routines): Likewise.
* libio/oldtmpfile.c: New file
* stdio-common/tmpfile.c: Use __fdopen and __close.
[USE_IN_LIBIO]: Use _IO_fdopen instead of _IO_new_fdopen. Put
tmpfile on symbol version GLIBC_2.1.
* stdio-common/tmpfile64.c: Use __fdopen and __close.
[USE_IN_LIBIO]: Use _IO_fdopen instead of _IO_new_fdopen.
* stdio-common/Version [GLIBC_2.1]: Add tmpfile.
* stdio-common/tempnam.c: Use __strdup instead of strdup.
* sysdeps/posix/fdopen.c: Define __fdopen and make fdopen weak
alias.
* sysdeps/generic/fdopen.c: Likewise.
* sysdeps/mach/hurd/fdopen.c: Likewise.
* stdio/stdio.h: Declare __fdopen.
* sunrpc/openchild.c: Use __fdopen instead of fdopen.
[USE_IN_LIBIO]: Map __fdopen to _IO_fdopen.
* sysdeps/posix/tempname.c (__gen_tempname): Don't bother checking
__stub_open64, it is never defined.
1998-08-05 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* libio/iofopen64.c: Fix typo. Avoid unnessary casts.
* libio/iopopen.c: Unlink file before freeing it if command
creation failed. Avoid unnessary casts.
* libio/iofdopen.c: Avoid unnecessary cast.
* pwd/fgetpwent_r.c [USE_IN_LIBIO]: Map funlockfile to
_IO_funlockfile.
* pwd/fgetspent_r.c [USE_IN_LIBIO]: Likewise.
1998-08-06 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* grp/grp.h, pwd/pwd.h: Don't declare __grpopen, __grpread,
__grpalloc, __grpscan and the corresponding pwd functions, they
were removed long ago.
1998-08-06 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* math/libm-test.c (csqrt_test): Adjust epsilons.
(casinh_test): Likewise.
1998-08-06 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* posix/globtest.sh: Fix typo. Remove second test output file.
1998-08-07 Cristian Gafton <gafton@redhat.com>
* pwd/putpwent.c (putpwent): Avoid writting (none) in the passwd file.
* shadow/putspent.c (putspent): Likewise.
* grp/putgrent.c: New file.
* grp/Makefile (routines): Add putgrent.
* grp/Versions [GLIBC_2.1]: Add putgrent.
* grp/grp.h: Add putgrent prototype.
1998-08-04 19:33 Ulrich Drepper <drepper@cygnus.com>
* elf/elf.h: More ELF definitions.
* hurd/hurdmsg.c (_S_msg_report_wait): Function removed.
* hurd/report-wait.c: New file.
* hurd/Makefile (routines): Added report-wait.
* sysdeps/mach/hurd/Makefile (inhibit-unix-syscalls): New variable.
* sysdeps/mach/hurd/i386/intr-msg.h (struct mach_msg_trap_args):
New type.
(SYSCALL_EXAMINE, MSG_EXAMINE): New inline functions.
* sysdeps/mach/hurd/i386/trampoline.c (struct mach_msg_trap_args):
Structure moved to intr-msg.h; include that.
* time/Makefile (CFLAGS-ialloc.c): Add -Wno-unused.
(CFLAGS-scheck.c): New variable.
* sysdeps/mach/hurd/dl-sysdep.c (__hurd_sigthread_stack_base,
__hurd_sigthread_stack_end, __hurd_sigthread_variables,
__hurd_threadvar_stack_mask): New variables.
* sysdeps/mach/hurd/fork.c: Set the new task's exception port to
its new message port.
* misc/init-misc.c: Put __init_misc in the __libc_subinit set.
* configure.in (uname): Add quoting.
* sysdeps/mach/hurd/fchdir.c: Don't consult errno unless lookup fails.
* hurd/fchroot.c: Likewise.
* posix/sys/types.h [GCC >= 2.7]: Define intN_t/u_intN_t using
__attribute__ ((__mode__ (__XX__))).
Wed Feb 7 03:24:05 1996 Torbjorn Granlund <tege@tmg.se>
* sysdeps/i386/i586/memcopy.h (WORD_COPY_FWD): Manually allocate
destination cache lines.
(WORD_COPY_BWD): Likewise.
Wed Feb 7 14:16:36 1996 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
* sysdeps/generic/Makefile (make_siglist): Get signum.h absolute
file name first thing, before $(native-compile) changes directories.
From Gord Matzigkeit <gord@enci.ucalgary.ca>:
* sysdeps/unix/make_errlist.c: Use strerror if available.
* sysdeps/unix/configure.in: New file
* sysdeps/unix/bsd/sun/syscalls.list: Added sigvec.
* sysdeps/unix/bsd/sun/sigvec.S: File removed.
* sysdeps/stub/sendto.c: Make sockaddr arg pointer to const.
* sysdeps/stub/connect.c: Likewise.
* sysdeps/stub/bind.c: Likewise.
* hurd/hurdlookup.c (__hurd_file_name_lookup_retry): RETRYNAME of
"" is only special for FS_RETRY_NORMAL; for FS_RETRY_REAUTH, do
another dir_lookup of "".
* sysdeps/mach/hurd/setitimer.c: Code rearranged a bit to use new
preemption interface.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler):
Use _hurdsig_catch_memory_fault.
* hurd/Makefile (headers): Add hurd/sigpreempt.h.
(sig): Add catch-signal.
* hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise):
Rewritten using a preempter in new interface.
* hurd/hurdfault.h (_hurdsig_catch_fault): Likewise.
(_hurdsig_catch_memory_fault): New macro.
* hurd/intr-msg.c: Use INTR_MSG_TRAP macro from machine-dependent
"intr-msg.h" for special syscall code, instead of i386-specific asm.
* hurd/hurdsig.c: Use INTR_MSG_BACK_OUT macro from
machine-dependent "intr-msg.h" before mutating thread state to
skip RPC.
* sysdeps/mach/hurd/i386/trampoline.c: If PC is inside
_hurd_intr_rpc_mach_msg special syscall code, use real SP saved in
%ecx.
* Makeconfig (link-libc): New variable; use shared library if
available.
(+link): Use it.
* sysdeps/mach/hurd/fork.c (_hurd_fork_locks): Variable removed.
Instead, declare with `symbol_set_declare'.
(fork): Use symbol_set_* macros for _hurd_fork_locks.
Use SS->thread instead of __mach_thread_self (). Suspend all
other threads during task_create and port copying.
* hurd/thread-cancel.c: New file.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): In
rpc_wait case, frob mach_msg args to set timeout on receive.
(_hurdsig_rcv_interrupted_p): Function removed.
* sysdeps/mach/hurd/alpha/trampoline.c: Likewise.
* sysdeps/mach/hurd/hppa/trampoline.c: Likewise.
* sysdeps/mach/hurd/mips/trampoline.c: Likewise.
* hurd/intr-msg.c: New file.
* hurd/hurd/signal.h (struct hurd_sigstate): New member `cancel'.
(_hurdsig_rcv_interrupted_p): Declaration removed.
(HURD_EINTR_RPC): Macro removed.
(_hurd_longjmp_thread_state, _hurd_interrupted_rpc_timeout): Declare
these.
* hurd/intr-rpc.h: New file.
* hurd/intr-rpc.defs: Just import intr-rpc.h.
* hurd/hurdsig.c (_hurd_interrupted_rpc_timeout): New variable.
(interrupted_reply_port_location): Take new flag arg; only catch
faults if it's set.
(abort_rpcs): Rename to _hurdsig_abort_rpcs; take same new flag arg.
No longer use _hurdsig_rcv_interrupted_p; instead compare PC to
&_hurd_intr_rpc_msg_in_trap. If before it, mutate state to simulate
MACH_SEND_INTERRUPTED return; on it, interrupt the operation. All
callers changed.
* hurd/hurd.h (hurd_thread_cancel, hurd_check_cancel): Declare these.
* hurd/Makefile (distribute): Remove intr-rpc.awk.
(sig): Add thread-cancel.
(transform-user-stub, transform-user-stub-output): Variables removed.
* sysdeps/mach/hurd/dl-sysdep.c: Change all RPCs from
`__hurd_intr_rpc_*' to `__*'.
(_hurd_intr_rpc_mach_msg): New function.
(_hurd_thread_sigstate): Function removed.
* sysdeps/mach/hurd/ioctl.c: Use _hurd_intr_rpc_mach_msg function,
instead of __mach_msg inside HURD_EINTR_RPC macro.
* sysdeps/generic/morecore.c [__GNU_LIBRARY__]: Declare `__sbrk'
to take ptrdiff_t arg.
* sysdeps/mach/hurd/fork.c: Remove _hurd_longjmp_thread_state decl.
* sysdeps/mach/hurd/kill.c (kill_pid): Don't make `inline'.
* libc-symbols.h [GCC >= 2.7] (strong_alias, weak_symbol,
weak_alias): Use `extern' storage class.
* Makeconfig (+gccwarn): Add -Winline.
* hurd/hurdsig.c (_hurd_internal_post_signal): If SS->context is
set, avoid abort_rpcs, and use reply and intr ports saved in
SS->context.
* sysdeps/mach/hurd/i386/trampoline.c: Don't set SS->intr_port
from SS->context. Don't clear SS->context.
* sysdeps/mach/hurd/i386/sigreturn.c: Don't set SS->intr_port when
setting SS->context. If msg_sig_post returns, re-lock and clear
SS->context.
Fri May 5 10:37:09 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
* mach/Makefile (errsystems.c): Comment out generation rule.
* sysdeps/mach/_strerror.c: Consider a system unknown if its
bad_sub member is null.
* mach/mig-alloc.c: Add weak alias to non-__ name.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler):
Point the return address for sigreturn's frame at a "hlt" insn so
it will definitely crash if sigreturn returns.
HAVE_WEAK_SYMBOLS for doing weak_alias.
* sysdeps/mach/hurd/i386/trampoline.c: Add a link to
SS->active_resources, so that _hurdsig_longjmp_from_handler will
be called when a longjmp unwinds the signal frame.
* sysdeps/mach/hurd/i386/sigreturn.c: Remove the link on the
SS->active_resources chain added by _hurd_setup_sighandler.
* hurd/sigunwind.c: New file.
* hurd/Makefile (sig): Add sigunwind.
* Makerules (lib%.so: lib%_pic.a): Remove dir name from $*.
* MakeTAGS (tags-sources): Include $(all-dist).
[subdir] (all-dist): Define to $(distribute).
* stdio/vfscanf.c (%n): Use READ_IN - 1, so as not to count the
read-ahead character.
* hurd/dtable.c, hurd/getdport.c, hurd/hurd.h, hurd/hurdexec.c,
hurd/hurdinit.c, hurd/hurdprio.c, hurd/hurdsock.c,
hurd/ports-get.c, hurd/ports-set.c, hurd/setauth.c,
hurd/setuids.c, sysdeps/mach/hurd/i386/trampoline.c:
Get anal with unsigned to pacify compiler.
* locale/C-ctype.c: New correct data generated by drepper.
* Rules: Don't use $(libc.a).
Parsing of grouped numbers contributed by Ulrich Drepper.
* stdlib/strtol.c (__strtol_internal): Renamed from strtol. Take
new flag arg; if nonzero, parse locale-dependent thousands
grouping and interpret only the prefix that is correctly grouped.
(strtol): Define this to call _strtol_internal with zero for the flag.
Use a weak symbol for the definition.
* stdlib/strtod.c (strtod, __strtod_internal): Likewise.
Check for the exponent of the number overflowing the float format.
* stdlib/stdlib.h (__strtof, __strtold): Declarations removed.
(__strto{f,d,ld,l,ul,q,uq}_internal): Declare these functions.
[__OPTIMIZE__]: Define inline functions calling those.
* stdlib/grouping.h: New file, written by drepper.
* stdlib/Makefile (distribute): Add grouping.h.
* stdio/vfscanf.c: Grok %' modifier to numeric conversions. Call
__strtoX_internal with the grouping flag set iff the modifier is
present.
Wed Mar 15 00:40:54 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
* sysdeps/generic/memchr.c: Fix typos: limit.h -> limits.h.
* mach/Machrules: Produce static deps for all object flavors.
[interface-library]: Remove all these variables and rules.
($(interface-library)-routines): Define this variable.
(extra-libs): Append $(interface-library) to this.
* mach/Makefile (interface-library): Omit .a suffix.
* hurd/Makefile: Likewise.
Tue Mar 14 23:40:31 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
* stdio/internals.c (flushbuf): If !FLUSH_ONLY, don't skip out
early if no new data in buffer after priming.
* Makerules (object-suffixes, libtypes): Move all these variables
to Makeconfig.
* Makeconfig (object-suffixes, libtypes): Moved here from Makerules.
* Makerules (build-extra-lib): New canned sequence.
* sysdeps/mach/hurd/euidaccess.c: Include fcntl.h. Declare ERR;
fix uses of FILE and PORT. Remove bogus weak alias for `access'.
* sysdeps/mach/hurd/dirfd.c: Include hurd/fd.h and errno.h.
Add missing semicolon.
* sysdeps/mach/hurd/opendir.c: Include hurd/fd.h. Use a `struct
hurd_fd *' temp var, since DIRP->__fd is a `void *'.
* sysdeps/mach/hurd/readdir.c: Include hurd/fd.h.
* stdlib/wcstombs.c: #if 0 out code for non-ASCII chars until the
locale data format is implemented.
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler):
Pass &__sigreturn on the stack to the trampoline code, so it is
not position-dependent.
* stdio/printf_fp.c (NDEBUG): Define this to disable assert.
Don't include <stdarg.h>.
(__printf_fp): Last arg ARGS is now `const void **const';
dereference ARGS[0] instead of using va_arg.
* locale/setlocale.c: In LC_ALL case, initialize CATEGORY before
loop to install data.
* locale/loadlocale.c (_nl_category_num_items): Use _NL_ITEM_INDEX
to extract number from item code.
(_nl_load_locale): Close the descriptor when finished.
* malloc/realloc.c (_realloc_internal): Call _malloc_internal in
place of malloc.
* time/tzfile.c (__tzfile_default): Initialize RULE_STDOFF to zero.
