As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.
A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this). Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).
Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.
Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.
* scripts/merge-test-results.sh: New file.
* Makefile (tests-special-notdir): New variable.
(tests): Run merge-test-results.sh.
(xtests): Likewise.
* Rules (tests-special-notdir): New variable.
(xtests-special-notdir): Likewise.
(tests): Run merge-test-results.sh
(xtests): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
The toplevel Makefile's subdir_targets variable refers to
subdir_lint.out. As far as I can tell, this is not defined or
referenced anywhere else in the tree. Having .out makefile references
that don't refer to the output from testcases seems confusing; this
patch removes the reference to subdir_lint.out.
Tested x86_64.
* Makefile (subdir_targets): Remove subdir_lint.out.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[BZ #15915] As described in the bug, the pattern rule for lib%.so files
in Makerules includes linkobj/libc.so as a dependency. However, the
explicit rule for linkobj/libc.so is in the top-level Makefile.
Thus, the subdirectory makefiles that include Makerules end up with an
erroneous makefile pattern rule for linkobj/libc.so that includes
itself as a dependency. The result is make warnings whenever rules
for other .so files are resolved -- and, on occasion, actual makefile
failures when a race condition causes the implicit rule to actually be
used.
This patch moves the explicit rules for linkobj/libc.so into Makerules
to clear up this problem. It also elaborates a couple of comments
that I'd initially found confusing.
This patch scratches an itch. Each individual gcc command in the
glibc build is over 1K, which means it takes up a good chunk of my
terminal. Most of that is include paths. Any version of GCC new
enough to build glibc supports response files, which were added in
2005. So use a response file for the static list of include paths.
Now the build commands are a lot shorter, and easier to use when
developing glibc.
2009-02-24 Roland McGrath <roland@redhat.com>
[BZ #9895]
* README.template: Reworded not to use substituted version number.
Renamed to ...
* README: ... here (no longer generated).
* Makefile (README): Target removed.
* Makefile (check-data): Use $(abi-name) before other guesses.
Look in $(add-ons) dirs before scripts/data/.
* elf/Makefile (check-data): Likewise.
* scripts/soversions.awk: Grok ABI line.
* Makeconfig ($(common-objpfx)soversions.mk): Likewise.
Emit definition for abi-name variable.
if [__USE_BSD].
* Makeconfig (sysdeps-srcdirs): New variable.
(sysdeps-add-ons-srcdirs): Use it.
* csu/Makefile (all-Banner-files): Use it.
* Makefile (dist-selector): New variable.
(glibc-%.tar rule): Use it. Make $(dist-separate) tarballs
contain one version-named directory.
($(all-subdirs-targets)): Use it in place of -C option.
* Rules: Use $(..) instead of ../ if it's already defined.
* Makeconfig (subdir-srcdirs): New variable.
* csu/Makefile (all-Banner-files): Use it.
* configure.in (--enable-add-ons): Set to "yes" by default.
Handle absolute add-on directory names when looking for configure
fragments. Also look for sysdeps/*/preconfigure fragments in add-ons.
Require add-on configure to set $libc_add_on_canonical, use
that in $add_ons_sfx. Substitute add_on_subdirs with computed list
of subdir names each add-on configure set in libc_add_on_subdirs.
* configure: Regenerated.
* Makefile (%/preconfigure: %/preconfigure.in): New pattern rule.
* config.make.in (add-on-subdirs): New substituted variable.
* Makeconfig (all-subdirs): Include $(add-on-subdirs).
Remove $(add-ons), $(sysdep-subdirs).
Don't filter out $(sysdep-inhibit-subdirs).
($(common-objpfx)sysd-dirs): Target removed. Don't include it.
($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs
files together to gen-sorted.awk, and $(subdirs) via -v.
(subdirs): Remove magic reordering for mach and hurd.
* scripts/gen-sorted.awk: Use subdirs from command line.
Process Subdirs and Depend files directly.
Let Subdirs files use "first dir" and "inhibit dir".
Always move elf to the end of the list.
* hurd/Depend: New file.
* sysdeps/mach/Subdirs: Use "first mach".
* Makefile (dist-separate): Remove linuxthreads.
(dist-separate-linuxthreads): Variable removed.
(glibc-%.tar rule): Use $(sysdeps-add-ons).
* Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs),
not $(all-subdirs).
(sysdep-makefiles): Use $(sysdirs).
(sysdirs): Remove export.
($(+sysdir_pfx)sysd-rules): Handle absolute directory names in
$(config-sysdirs).
(+sysdir_pfx): Variable removed.
(sysd-rules): Use $(common-objpfx) in place of it.
(sysdirs): Variable moved to ...
* Makeconfig (sysdirs): ... here.
Handle absolute directory names in $(config-sysdirs).
(full_config_sysdirs): Variable removed.
* csu/Makefile: Use $(sysdirs) in vpath directive.
* math/Makefile (ulps-file): Use $(sysdirs).
* sysdeps/gnu/Makefile (errlist-c): Likewise.
($(objpfx)errlist-compat.c): Likewise.
* Makeconfig (all-Subdirs-files): Likewise.
($(common-objpfx)config.status): Likewise.
* configure.in (sysnames): Handle absolute add-on directory names.
(sysdeps_add_ons): New variable, AC_SUBST it.
Compute which add-ons contributed sysdeps directories.
* configure: Regenerated.
* config.make.in (sysdeps-add-ons): New substituted variable.
* Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ...
* Makeconfig: ... to here.
(+sysdep_dirs): Append $(sysdeps-add-ons) here.
(+includes): Remove $(objpfx) include, already in $(+sysdep_dirs).
Remove $(includes).
(sysdep-makeconfigs): Use $(+sysdep_dirs).
($(common-objpfx)shlib-versions.v.i): Likewise.
* Makeconfig: Remove hair to set Makeconfig-add-on.
* sysdeps/unix/Makefile (sysdirs): Remove export.
(asm_CPP): Variable removed.
($(common-objpfx)sysd-syscalls): Pass them directly for the script.
* sysdeps/posix/Makefile: New file.
* Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix
values here with ?=.
* stdlib/gen-mpn-copy: File removed.
* stdlib/Makefile (distribute): Remove it.
* configure.in: Don't grok --with-gmp.
* configure: Regenerated.
* configure.in (libc_cv_idn): Don't check it; libidn/configure does it.
* configure: Regenerated.
* bare: Directory removed, saved in ports repository.
into $(inst_includedir)/%.h from sysdirs.
[headers]: Change static pattern rule for installing
$(headers) to do only those not matching %.h.
($(inst_includedir)/%.h: $(objpfx)%.h): Add this pattern rule instead.
($(inst_includedir)/%.h: %.h): Likewise.
($(inst_includedir)/%.h: $(..)include/%.h): Likewise.
* Makefile ($(inst_includedir)/gnu/stubs.h):
Add $(make-target-directory).
* stdlib/Makefile (headers): Restore headers removed in last change.
2006-01-16 Jakub Jelinek <jakub@redhat.com>
* math/e_exp2l.c: Don't include stdio.h, errno.h, stub-tag.h, include
math_private.h.
(__ieee754_exp2l): Compute for now as expl (M_LN2l * x)
instead of failing.
(exp2l): Remove stub_warning.
2006-01-15 Jakub Jelinek <jakub@redhat.com>
* io/tst-faccessat.c (do_test): Don't fail if geteuid () == 0.
* intl/tst-codeset.sh: Use mkdir -p. Put msgfmt output in temporary
file and mv it into place.
* intl/tst-gettext3.sh: Likewise.
* Makefile (glibc-%.tar rule): Use make -q to ensure configure scripts
are up to date in srcdir. Touch all configure scripts after export.
[BZ #592]
[BZ #825]
[BZ #825]
[BZ #592]
[BZ #592]
[BZ #592]
[BZ #592]
[BZ #822]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
[BZ #821]
* Makefile (installed-stubs): New variable.
Set to $(inst_includedir)/gnu/stubs.h if $(biarch) is no,
or to $(inst_includedir)/gnu/stubs-$(biarch).h if otherwise.
[$(biarch) != no] (install-others-nosubdir): Add $(installed-stubs).
($(inst_includedir)/gnu/stubs.h): Use $(installed-stubs) for this
rule's target.
($(inst_includedir)/gnu/stubs.h): New target, install from ...
* include/stubs-biarch.h: New file.
* shlib-versions (i.86-.*-.*): Add WORDSIZE64 line mapping to x86_64.
* Makeconfig ($(common-objpfx)soversions.mk): Depend on Makeconfig.
Emit defn for variable `biarch'.
* include/stub-tag.h: Update comment.
* Makefile (dist-separate): New variable.
(glibc-%.tar rule): Make separate tar files for add-ons listed there.
Depend on their configure files.
(dist-do-separate-dirs): New canned sequence to do that.
(dist-separate-libidn, dist-separate-linuxthreads): New variables.
(dist): Depend on add-on tar files based on $(dist-separate).
(dist-version): New variable, default to $(version).
(tag-for-dist, dist): Use that in place of $(version) in deps.
2003-10-09 Steven Munroe <sjmunroe@us.ibm.com>
* Makefile: Allow for c++-types-$(config-machine)-$(config-os).data in
addition to c++-types-$(base-machine)-$(config-os).data.
* scripts/data/c++-types-powerpc-linux-gnu.data: New file.
* scripts/data/c++-types-powerpc64-linux-gnu.data: New file.
2003-09-08 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/bits/types.h (__quad_t): Make long int if 64-bit.
(__u_quad_t): Make unsigned long int if 64-bit.
(__SQUAD_TYPE): Make long int if 64-bit.
(__UQUAD_TYPE): Make unsigned long int if 64-bit.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h: Remove.
2003-09-08 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Run check-c++-types.sh if possible.
* scripts/check-c++-types.h: New file.
* scripts/data/c++-ctypes-i386-linux-gnu.data: New file.
contiguous case. Bug report from Prem Gopalan <prem@mazunetworks.com>.
stanzas for each version set, the set name listed only once.
* scripts/extract-abilist.awk: New file.
* scripts/merge-abilist.awk: New file.
* Makerules (check-abi-%, update-abi-%): New pattern rules.
(update-abi, check-abi): New targets.
* Makefile (+subdir_targets): Add subdir_{check,update}-abi.
* Makerules (%.symlist): Use LC_ALL=C when running awk script.
* Makerules ($(common-objpfx)format.lds): New target.
(common-generated): Add it.
($(inst_libdir)/libc.so): Depend on that, and cat it into the result.
* scripts/output-format.sed: New file.
* Makefile (distribute): Add it.
* inet/herrno.c (__libc_h_errno): Likewise.
* resolv/res_libc.c (__libc_res): Likewise.
[USE___THREAD]: Use this in place of [USE_TLS && HAVE___THREAD].
(__res_state) [! USE___THREAD]: Don't define as weak.
* csu/Versions: Revert last change.
* resolv/Versions: Revert last change.
* Makerules ($(common-objpfx)%.make): New pattern rule.
* tls.make.c: New file.
* Makefile (distribute): Add it.
* Makefile (distribute): Add it.
* Makerules ($(objpfx)%.dynsym, $(objpfx)%.symlist): New rules.
(tests): Depend on .symlist file for each $(install-lib.so-versioned).
[! subdir] (tests): Depend on libc.symlist.
(generated): Add those files.
* aclocal.m4 (LIBC_PROG_BINUTILS): Check for objdump, set OBJDUMP.
* configure: Regenerated.
* config.make.in (OBJDUMP): New variable, substituted by configure.
* malloc/mcheck.c (struct hdr): New members `block' and `magic2'.
(mallochook, reallochook): Set them up.
(checkhdr): Check HDR->magic2 value.
(freehook): Reset HDR->magic2.
(memalignhook): New static function.
(old_memalign_hook): New static variable.
(mcheck, reallochook): Set __memalign_hook to memalignhook.
* include/stubs-prologue.h: New file. Give #error under #ifdef _LIBC.
* Makefile ($(inst_includedir)/gnu/stubs.h): Depend on it.
Use that file's contents instead of literal echo's for the prologue.
* include/features.h: Include <gnu/stubs.h> unconditionally.
* include/gnu/stubs.h: New file.
* configure.in (AUTOCONF): New check to set it. Set to "no" if the
one found doesn't work on our configure.in.
* configure: Regenerated.
* config.make.in (AUTOCONF): New substituted variable.
* Makefile (autoconf-it-cvs): New canned sequence, broken out of ...
(autoconf-it): ... here, use that instead of defining conditionally.
Use $(AUTOCONF) instead of literal autoconf.
[$(AUTOCONF) != no] (configure, %/configure): Protect these rules
with this condition.
* Make-dist (autoconf-it, configure, %/configure): Copy those changes.
when using h_errno and it's not set to NETDB_INTERNAL.
* nss/getXXbyYY_r.c [NEED_H_ERRNO]: Likewise.
* Makefile ($(common-objpfx)testrun.sh): New target.
(others): Depend on it.
(postclean-generated): Append it.
2002-04-08 Ulrich Drepper <drepper@redhat.com>
* Makeconfig (CPPFLAGS): Also add CPPFLAGS-<basename> where <basename>
is the name of the source file without extension.
* Makefile (distribute): Add cppflags-iterator.mk.
* cppflags-iterator.mk: New file.
* extra-lib.mk: For the sources of the library run
cppflags-iterator.mk.
* include/libintl.h: Declare __dcgettext_internal and
_libc_intl_domainname_internal. Define __dcgettext using these
two symbols if used in libc itself.
* argp/argp-help.c: Define dgettext using __dcgettext_internal and
_libc_intl_domainname_internal.
* argp/argp-parse.c: Likewise.
* intl/dcgettext.c (__dcgettext): Use INTDEF to define alias.
* intl/dgettext.c: Call __dcgettext_internal instead of __dcgettext.
* intl/gettext.c: Likewise.
* locale/SYS_libc.c (_libc_intl_domainname): Use INTDEF to define
alias.
* posix/regcomp.c (gettext): Use __dcgettext_internal instead of
__dcgettext.
* posix/regex_internal.c (gettext): Likewise.
2001-08-29 Ulrich Drepper <drepper@redhat.com>
* nis/nis_findserv.c (__nis_findfastest): Don't fail if reply received
first is from a previous call.
Patch by Alexander Belopolsky <alexb@rentec.com> for [PR libc/3670].
2001-08-29 Andreas Schwab <schwab@suse.de>
* sysdeps/ia64/fpu/libm-test-ulps: Updated.
2001-08-25 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
* config.make.in (INSTALL_SCRIPT): Define.
* Makeconfig (INSTALL_SCRIPT): Define.
* Makerules (do-install-script): New macro to install scripts using
INSTALL_SCRIPT.
(install-bin-script): New rule to install scripts with
do-install-script.
(install-bin-script-nosubdir): New rule.
(install-no-libc.a-nosubdir): Add install-bin-script-nosubdir.
(distinfo-vars): Add $(install-bin-script).
* Rules (others): Likewise.
* Makefile (glibcbug): Install with install-bin-script.
* debug/Makefile (xtrace): Likewise.
(catchsegv): Likewise.
* elf/Makefile (ldd): Likewise.
* malloc/Makefile (mtrace): Likewise.
* timezone/Makefile (tzselect): Likewise.
2001-08-29 H.J. Lu <hjl@gnu.org>
* sysdeps/mips/dl-machine.h (__dl_runtime_resolve): Pass
ELF_RTYPE_CLASS_PLT, instead of R_MIPS_REL32, to
_dl_lookup_versioned_symbol () and _dl_lookup_symbol ().
Add it to LDFLAGS.so, LDFLAGS-rtld, and +link.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2000-12-11 Bruno Haible <haible@clisp.cons.org>
* Makefile ($(inst_includedir)/gnu/stubs.h): Sort in the C locale.
2000-12-26 Ulrich Drepper <drepper@redhat.com>
* sunrpc/Makefile (rpcgen-cmd): Use single quotes in sed call.
Patch by Ed Connell <Ed.Connell@sas.com>.
2000-09-29 Ulrich Drepper <drepper@redhat.com>
* elf/chroot_canon.c: Don't report a failure if the last path
component is not available.
* elf/ldconfig.c (parse_conf): Use canonicalized name when reporting
error.
* elf/cache.c (print_cache): Use stat64 instead of stat.
* elf/ldconfig.c (chroot_stat): Likewise.
(create_links): Likewise.
(manual_link): Likewise.
(search_dir): Likewise.
* elf/readlib.c (process_file): Likewise.
* Makefile (install): Set LC_ALL and LANGUAGE to C before running
ldconfig.
2000-09-29 Jakub Jelinek <jakub@redhat.com>
* elf/chroot_canon.c: New file.
* elf/Makefile: Build and distribute it.
* elf/ldconfig.h (process_file): Add real_file_name argument.
(chroot_canon): Add prototype.
* elf/ldconfig.c (cache_file): Remove const.
(chroot_stat): New.
(create_links): Add real_path argument.
If opt_chroot, maintain both real and given filenames.
(manual_link): Likewise.
(search_dir): Likewise.
(parse_conf): If opt_chroot, use chroot_canon to find the real
config file.
(main): For -r, try to use chroot, if it fails, leave opt_chroot set
and use chroot_canon where appropriate to do the same as if chroot
succeeded.
* elf/readlib.c (process_file): Add real_file_name argument, pass it
to fopen.
2000-09-29 Ulrich Drepper <drepper@redhat.com>
* math/complex.h (_Complex): We can be more specific when _Complex
is defined by the compiler.
tst-ctype-de_DE.ISO-8859-1.in.
2000-08-01 Andreas Jaeger <aj@suse.de>
* Makefile (distribute): Follow name change of tst-ctype-de.in to
tst-ctype-de_DE.ISO-8859-1.in.
