This patch syncs the regex implementation with gnulib (commit 0ee5212).
Only two changes in GLIBC regex testing are required:
1. posix/bug-regex28.c: as previously discussed [1] the change of
expected results on the pattern should be safe.
2. posix/PCRE.tests: the ERE (a)|\1 is malformed (in the sense that
the \1 doesn't mean anything) and although current GLIBC accepts
it has undefined behavior. This patch removes the specific test.
This sync contains some patches from thread 'Regex: Make libc regex
more usable outside GLIBC.' [2] which have been pushed upstream in
gnulib. This patches also fixes some regex issues (BZ #23233,
BZ #21163, BZ #18986, BZ #13762) and I did not add testcases for
both #23233 and #13762 because I couldn't think a simple way to
trigger the expected failure path to trigger them.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #23233]
[BZ #21163]
[BZ #18986]
[BZ #13762]
* posix/Makefile (tests): Add bug-regex37 and bug-regex38.
* posix/PCRE.tests: Remove invalid test.
* posix/bug-regex28.c: Fix expected values for used syntax.
* posix/bug-regex37.c: New file.
* posix/bug-regex38.c: Likewise.
* posix/regcomp.c: Sync with gnulib.
* posix/regex.c: Likewise.
* posix/regex.h: Likewise.
* posix/regex_internal.c: Likewise.
* posix/regex_internal.h: Likewise.
* posix/regexec.c: Likewise.
[1] https://sourceware.org/ml/libc-alpha/2017-12/msg00807.html
[2] https://sourceware.org/ml/libc-alpha/2017-12/msg00237.html
Unicode 11.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 11.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added:
Total added characters in newly generated CHARMAP: 684
Total added characters in newly generated WIDTH: 119
alpha: Added 380 characters in new ctype which were not in old ctype
combining: Added 56 characters in new ctype which were not in old ctype
combining_level3: Added 37 characters in new ctype which were not in old ctype
graph: Added 684 characters in new ctype which were not in old ctype
lower: Added 82 characters in new ctype which were not in old ctype
print: Added 684 characters in new ctype which were not in old ctype
punct: Added 304 characters in new ctype which were not in old ctype
tolower: Added 79 characters in new ctype which were not in old ctype
totitle: Added 33 characters in new ctype which were not in old ctype
toupper: Added 79 characters in new ctype which were not in old ctype
upper: Added 79 characters in new ctype which were not in old ctype
No characters were removed.
[BZ #23308]
* unicode-gen/Makefile (UNICODE_VERSION): Set to 11.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 11.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: likewise.
* localedata/unicode-gen/PropList.txt: likewise.
* localedata/unicode-gen/UnicodeData.txt: likewise.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: likewise.
* localedata/locales/tr_TR: likewise.
* localedata/locales/translit_circle: likewise.
* localedata/locales/translit_cjk_compat: likewise.
* localedata/locales/translit_combining: likewise.
* localedata/locales/translit_compat: likewise.
* localedata/locales/translit_font: likewise.
* localedata/locales/translit_fraction: likewise.
Different than Linux, hurd does not need the OFD locks fix from
06ab719d30 (since OFD locks are current Linux specific). This in
turn allows hurd to not provide a fcntl compat symbol.
Checked on a i686-gnu with check-abi.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl): Remove
symbol.
Since the addition of the _Float128 API, strfromf128 and printf_size use
__printf_fp to print _Float128 values. This is achieved by setting the
'is_binary128' member of the 'printf_info' structure to one. Now that
the format of long double on powerpc64le is getting a third option, this
mechanism is reused for long double values that have binary128 format
(i.e.: when -mabi=ieeelongdouble).
This patch adds __printf_sizeieee128 as an exported symbol, but doesn't
provide redirections from printf_size, yet. All redirections will be
installed in a future commit, once all other functions that print or
read long double values with binary128 format are ready. In
__printf_fp, when 'is_binary128' is one, the floating-point argument is
treated as if it was of _Float128 type, regardless of the value of
'is_long_double', thus __printf_sizeieee128 sets 'is_binary128' to the
same value of 'is_long_double'. Otherwise, double values would not be
printed correctly.
Tested for powerpc64le.
Ideally sign should be bool, but sometimes (e.g. in powf) it's more
efficient to pass a non-zero value than 1 to indicate that the sign
should be set. The fixed size int is less ambigous than unsigned
long.
* sysdeps/ieee754/flt-32/e_powf.c (__powf): Use uint32_t.
(exp2f_inline): Likewise.
* sysdeps/ieee754/flt-32/math_config.h (__math_oflowf): Likewise.
(__math_uflowf): Likewise.
(__math_may_uflowf): Likewise.
(__math_divzerof): Likewise.
(__math_invalidf): Likewise.
* sysdeps/ieee754/flt-32/math_errf.c (xflowf): Likewise.
(__math_oflowf): Likewise.
(__math_uflowf): Likewise.
(__math_may_uflowf): Likewise.
(__math_divzerof): Likewise.
(__math_invalidf): Likewise.
The __libc_freeres framework does not extend to non-libc.so objects.
This causes problems in general for valgrind and mtrace detecting
unfreed objects in both libdl.so and libpthread.so. This change is
a pre-requisite to properly moving the malloc hooks out of malloc
since such a move now requires precise accounting of all allocated
data before destructors are run.
This commit adds a proper hook in libc.so.6 for both libdl.so and
for libpthread.so, this ensures that shm-directory.c which uses
freeit () to free memory is called properly. We also remove the
nptl_freeres hook and fall back to using weak-ref-and-check idiom
for a loaded libpthread.so, thus making this process similar for
all DSOs.
Lastly we follow best practice and use explicit free calls for
both libdl.so and libpthread.so instead of the generic hook process
which has undefined order.
Tested on x86_64 with no regressions.
Signed-off-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
This locale already contained correct data in mon array. Updated from
CLDR to start the month names with the lowercase letters.
alt_mon is a new import from CLDR. The change has been consulted
off-list with a native speaker.
[BZ #23140]
* localedata/locales/hy_AM (mon): Synchronize with CLDR (lowercase,
genitive case).
(alt_mon): New entry, import from CLDR (nominative case).
Vector registers perform better than scalar register pairs for copying
data so prefer them instead. This results in a time reduction of over
50% (i.e. 2x speed improvemnet) for some smaller sizes for memcpy-walk.
Larger sizes show improvements of around 1% to 2%. memcpy-random shows
a very small improvement, in the range of 1-2%.
* sysdeps/aarch64/multiarch/memcpy_falkor.S (__memcpy_falkor):
Use vector registers.
Vector registers perform much better for moves compared to pairs of
registers on falkor, so use them instead. This results in a time
reduction of up to 50% (i.e. 2x improvement) for a lot of the smaller
sizes, i.e. up to 1K in memmove-walk. Improvements for larger sizes are
smaller, at about 1%-2%.
* sysdeps/aarch64/multiarch/memmove_falkor.S
(__memcpy_falkor): Use vector registers.
We have this condition in `check_match' (in elf/dl-lookup.c):
if (__glibc_unlikely ((sym->st_value == 0 /* No value. */
&& stt != STT_TLS)
|| ELF_MACHINE_SYM_NO_MATCH (sym)
|| (type_class & (sym->st_shndx == SHN_UNDEF))))
return NULL;
which causes all !STT_TLS symbols whose value is zero to be silently
ignored in lookup. This may make sense for regular symbols, however not
for absolute (SHN_ABS) ones, where zero is like any value, there's no
special meaning attached to it.
Consequently legitimate programs fail, for example taking the
`elf/tst-absolute-sym' test case, substituting 0 for 0x55aa in
`elf/tst-absolute-sym-lib.lds' and then trying to run the resulting
program we get this:
$ .../elf/tst-absolute-sym
.../elf/tst-absolute-sym: symbol lookup error: .../elf/tst-absolute-sym-lib.so: undefined symbol: absolute
$
even though the symbol clearly is there:
$ readelf --dyn-syms .../elf/tst-absolute-sym-lib.so | grep '\babsolute\b'
7: 00000000 0 NOTYPE GLOBAL DEFAULT ABS absolute
$
The check for the zero value has been there since forever or commit
d66e34cd4234/08162fa88891 ("Implemented runtime dynamic linker to
support ELF shared libraries.") dating back to May 2nd 1995, and the
problem triggers regardless of commit e7feec374c ("elf: Correct
absolute (SHN_ABS) symbol run-time calculation [BZ #19818]") being
present or not.
Fix the issue then, by permitting `sym->st_value' to be 0 for SHN_ABS
symbols in lookup.
[BZ #23307]
* elf/dl-lookup.c (check_match): Do not reject a symbol whose
`st_value' is 0 if `st_shndx' is SHN_ABS.
* elf/tst-absolute-zero.c: New file.
* elf/tst-absolute-zero-lib.c: New file.
* elf/tst-absolute-zero-lib.lds: New file.
* elf/Makefile (tests): Add `tst-absolute-zero'.
(modules-names): Add `tst-absolute-zero-lib'.
(LDLIBS-tst-absolute-zero-lib.so): New variable.
($(objpfx)tst-absolute-zero-lib.so): New dependency.
($(objpfx)tst-absolute-zero: New dependency.
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
This is a major rewrite of the description of 'crypt', 'getentropy',
and 'getrandom'.
A few highlights of the content changes:
- Throughout the manual, public headers, and user-visible messages,
I replaced the term "password" with "passphrase", the term
"password database" with "user database", and the term
"encrypt(ion)" with "(one-way) hashing" whenever it was applied to
passphrases. I didn't bother making this change in internal code
or tests. The use of the term "password" in ruserpass.c survives,
because that refers to a keyword in netrc files, but it is adjusted
to make this clearer.
There is a note in crypt.texi explaining that they were
traditionally called passwords but single words are not good enough
anymore, and a note in users.texi explaining that actual passphrase
hashes are found in a "shadow" database nowadays.
- There is a new short introduction to the "Cryptographic Functions"
section, explaining how we do not intend to be a general-purpose
cryptography library, and cautioning that there _are_, or have
been, legal restrictions on the use of cryptography in many
countries, without getting into any kind of detail that we can't
promise to keep up to date.
- I added more detail about what a "one-way function" is, and why
they are used to obscure passphrases for storage. I removed the
paragraph saying that systems not connected to a network need no
user authentication, because that's a pretty rare situation
nowadays. (It still says "sometimes it is necessary" to
authenticate the user, though.)
- I added documentation for all of the hash functions that glibc
actually supports, but not for the additional hash functions
supported by libxcrypt. If we're going to keep this manual section
around after the transition is more advanced, it would probably
make sense to add them then.
- There is much more detailed discussion of how to generate a salt,
and the failure behavior for crypt is documented. (Returning an
invalid hash on failure is what libxcrypt does; Solar Designer's
notes say that this was done "for compatibility with old programs
that assume crypt can never fail".)
- As far as I can tell, the header 'crypt.h' is entirely a GNU
invention, and never existed on any other Unix lineage. The
function 'crypt', however, was in Issue 1 of the SVID and is now
in the XSI component of POSIX. I tried to make all of the
@standards annotations consistent with this, but I'm not sure I got
them perfectly right.
- The genpass.c example has been improved to use getentropy instead
of the current time to generate the salt, and to use a SHA-256 hash
instead of MD5. It uses more random bytes than is strictly
necessary because I didn't want to complicate the code with proper
base64 encoding.
- The testpass.c example has three hardwired hashes now, to
demonstrate that different one-way functions produce different
hashes for the same input. It also demonstrates how DES hashing
only pays attention to the first eight characters of the input.
- There is new text explaining in more detail how a CSPRNG differs
from a regular random number generator, and how
getentropy/getrandom are not exactly a CSPRNG. I tried not to make
specific falsifiable claims here. I also tried to make the
blocking/cancellation/error behavior of both getentropy and
getrandom clearer.
In preparation for a major revision of the documentation for
crypt(_r), getentropy, and getrandom, reorganize crypt.texi. This
patch does not change any text; it only deletes and moves text.
The description of 'getpass' moves to terminal.texi, since all it does
is read a password from the controlling terminal with echo disabled.
The "Legal Problems" section of crypt.texi is dropped, and the
introductory text is shifted down to the "Encrypting Passwords"
section; the next patch will add some new introductory text.
Also, it is no longer true that crypt.texi's top @node needs to have
no pointers. That was a vestige of crypt/ being an add-on. (makeinfo
itself doesn't need @node pointers anymore, but the scripts that
assemble the libc manual's topmost node rely on each chapter-level
node having them.)
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards. Demote all of them to compatibility symbols, and
remove their prototypes from installed headers. cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.
POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.
The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi. The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little. It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.
DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
A lookup operation in map_newlink could turn into an insert because of
holes in the interface part of the map. This leads to incorrectly set
the name of the interface to NULL when the interface is not present
for the address being processed (most likely because the interface was
added between the RTM_GETLINK and RTM_GETADDR calls to the kernel).
When such changes are detected by the kernel, it'll mark the dump as
"inconsistent" by setting NLM_F_DUMP_INTR flag on the next netlink
message.
This patch checks this condition and retries the whole operation.
Hopes are that next time the interface corresponding to the address
entry is present in the list and correct name is returned.
After commit d76d370355 ("Fix missing
timespec definition for sys/stat.h (BZ #21371)") in combination with
kernel UAPI changes, GCC sanitizer builds start to fail due to a
conflicting definition of struct timespec in <linux/time.h>. Use
_STRUCT_TIMESPEC as the header file inclusion guard, which is already
checked in the kernel header, to support including <linux/time.h> and
<sys/stat.h> in the same translation unit.
This patch adds __*ieee128 symbols for strfrom, strtold, strtold_l, wcstold
and wcstold_l functions. Redirection from *l to *ieee128 will be handled
in separate patch once we start building these new files.
2018-06-28 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* sysdeps/ieee754/ldbl-128ibm-compat/Versions: Add __strfromieee128,
__strtoieee128, __strtoieee128_l,__wcstoieee128 and __wcstoieee128_l.
* sysdeps/ieee754/ldbl-128ibm-compat/strfromf128.c: New file.
* sysdeps/ieee754/ldbl-128ibm-compat/strtof128.c: New file.
* sysdeps/ieee754/ldbl-128ibm-compat/strtof128_l.c: New file.
* sysdeps/ieee754/ldbl-128ibm-compat/wcstof128.c: New file.
* sysdeps/ieee754/ldbl-128ibm-compat/wcstof128_l.c: New file.
Copy and null-terminate NIS+ password file UID and GID entries whose
length is non-zero and are not terminated, in addition to empty ones,
fixing a bug and a compilation issue causing an error with GCC 8:
nss_nisplus/nisplus-parser.c: In function '_nss_nisplus_parse_pwent':
nss_nisplus/nisplus-parser.c:90:7: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation]
strncpy (first_unused, numstr, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nss_nisplus/nisplus-parser.c:106:7: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation]
strncpy (first_unused, numstr, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
introduced with commit ac05397075:
commit ac05397075
Author: Ulrich Drepper <drepper@redhat.com>
Date: Sun Apr 30 07:01:26 2006 +0000
* nis/nss_nisplus/nisplus-parser.c: Minor optimizations and
cleanups. Avoid copying data if it can be used in the old place.
(no mailing list reference available). Obviously regardless of the
recently added compiler diagnostics causing a build error this code has
been long non-functional, so I guess NIS+ servers have been supplying
strings that are non-empty and have already been null-terminated.
Which in turn made it unnecessary to make a null-terminated copy,
masking this bug.
[BZ #23266]
* nis/nss_nisplus/nisplus-parser.c (_nss_nisplus_parse_pwent):
Copy and null-terminate entries that are not terminated, in
addition to empty ones.
This patch removes nptl/sockperf.c, an unused, x86-specific program
with a hardcoded path in /tmp. If someone finds some of this code in
future for adding a proper benchmark, that does not of course rule out
adding it back in that form, but for now I think it's best to
eliminate this code with the hardcoded /tmp path.
Tested for x86_64.
* nptl/sockperf.c: Remove file.
The function comment suggests that _dl_map_object_deps cannot use
malloc, but it already allocates the l_initfini array on the heap, so
the additional allocation should be acceptable.
As noted in bug 13888, and as I noted previously in
<https://sourceware.org/ml/libc-alpha/2000-10/msg00111.html>, various
tests used hardcoded paths in /tmp, so posing issues for simultaneous
test runs from different build directories.
This patch fixes such uses of hardcoded file names to put them in the
build directory instead (in the case of stdio-common/bug5 the file
names are changed as well, to avoid a conflict with the name bug5.out
also used for the automatic test output redirection). It also fixes
test-installation.pl likewise (that was using filenames with $$ in
them rather than strictly hardcoded names, but that's still not good
practice for temporary file naming).
Note that my list of files changed is not identical to that in bug
13888. I added tst-spawn3.c and test-installation.pl, and removed
some tests that seem to me (now) to create temporary files securely
(simply using /tmp is not itself a problem if the temporary files are
handled properly with mkstemp; I haven't checked whether those tests
used to do things insecurely). conformtest is not changed because the
makefiles always pass a --tmpdir option so the /tmp default is
irrelevant, and for the same reason there is no actual problem with
nptl/tst-umask1.c because again the makefiles always override the
default.
nptl/sockperf.c is ignored because there is no code to run it;
probably that file should actually be removed.
Some tests use the mktemp function, but I think they all use it in a
way that *is* secure (for generating names for directories / sockets /
fifos / symlinks, where the operation using the name will not follow
symlinks and so there is no potential for a symlink attack on the
account running the testsuite).
Some tests use the tmpnam function to generate temporary file names.
This is in principle insecure, but not addressed by this patch (I
consider it a separate issue from the fully hardcoded paths).
Tested for x86_64.
[BZ #13888]
* posix/Makefile (CFLAGS-tst-spawn3.c): New variable.
* posix/tst-spawn3.c (do_test): Put tst-spwan3.pid in OBJPFX, not
/tmp.
* scripts/test-installation.pl: Put temporary files in build
directory, not /tmp.
* stdio-common/Makefile (CFLAGS-bug3.c): New variable.
(CFLAGS-bug4.c): Likewise.
(CFLAGS-bug5.c): Likewise.
(CFLAGS-test-fseek.c): Likewise.
(CFLAGS-test-popen.c): Likewise.
(CFLAGS-test_rdwr.c): Likewise.
* stdio-common/bug3.c (main): Put temporary file in OBJPFX, not
/tmp.
* stdio-common/bug4.c (main): Likewise.
* stdio-common/bug5.c (main): Likewise.
* stdio-common/test-fseek.c (TESTFILE): Likewise.
* stdio-common/test-popen.c (do_test): Likewise.
* stdio-common/test_rdwr.c (main): Likewise.
true. On some arches this caused valgrind to warn about uninitialized
bytes when the struct was written to the file system.
This patch moves the initialization of pad outside of the
conditional.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch fixes the OFD ("file private") locks for architectures that
support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The
issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and
F_{SET,GET}L{W}K64 expects a flock64 argument and when using old
F_OFD_* flags with a non LFS flock argument the kernel might interpret
the underlying data wrongly. Kernel idea originally was to avoid using
such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS
semantic as default it is possible to provide the functionality and
avoid the bogus struct kernel passing by adjusting the struct manually
for the required flags.
The idea follows other LFS interfaces that provide two symbols:
1. A new LFS fcntl64 is added on default ABI with the usual macros to
select it for FILE_OFFSET_BITS=64.
2. The Linux non-LFS fcntl use a stack allocated struct flock64 for
F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided
struct.
3. Keep a compat symbol with old broken semantic for architectures
that do not define __OFF_T_MATCHES_OFF64_T.
So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will
aliased to fcntl and no adjustment would be required. So to actually
use F_OFD_* with LFS support the source must be built with LFS support
(_FILE_OFFSET_BITS=64).
Also F_OFD_SETLKW command is handled a cancellation point, as for
F_SETLKW{64}.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #20251]
* NEWS: Mention fcntl64 addition.
* csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel.
* login/utmp_file.c: Likewise.
* sysdeps/posix/fdopendir.c: Likewise.
* sysdeps/posix/opendir.c: Likewise.
* sysdeps/unix/pt-fcntl.c: Likewise.
* include/fcntl.h (__libc_fcntl64, __fcntl64,
__fcntl64_nocancel_adjusted): New prototype.
(__fcntl_nocancel_adjusted): Remove prototype.
* io/Makefile (routines): Add fcntl64.
(CFLAGS-fcntl64.c): New rule.
* io/Versions [GLIBC_2.28] (fcntl64): New symbol.
[GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64.
* io/fcntl.h (fcntl64): Add prototype and redirect if
__USE_FILE_OFFSET64 is defined.
* io/fcntl64.c: New file.
* manual/llio.text: Add a note for which commands fcntl acts a
cancellation point.
* nptl/Makefile (CFLAGS-fcntl64.c): New rule.
* sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64):
New symbols.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64,
F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for
non-LFS case.
* sysdeps/unix/sysv/linux/fcntl64.c: New file.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
(__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
* sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks.
(tests-internal): Add tst-ofdlocks-compat.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
(fcntl64): New symbol.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl,
fcntl64): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
If the caller-supplied buffer is not large enough, fall back directly
malloc.
The previous __libc_use_alloca check was incorrect because it did not
take into account that extend_alloca may fail to merge allocations, so
it would underestimate the stack space being used by roughly a factor
of two.
The pre-allocation of the three scratch buffers increased the initial
stack size somewhat, but if retries are needed, the previous version
used more stack space if extend_alloca could not merge allocations.
Lack of alloca accounting also means could be problematic with
extremely large NSS responses, too.
[BZ #18023]
* nscd/aicache.c (addhstaiX): Use struct scratch_buffer instead
of extend_alloca.
Kashubian language is not supported by CLDR, data copied from Wikipedia
and documents released by RJK (official Kashubian Language Council),
also consulted with a native speaker.
Note that this language also needs ab_alt_mon feature due to the month
May: nominative "môj", genitive "maja"; abbreviated nominative "môj",
abbreviated genitive "maj".
[BZ #23140]
* localedata/locales/csb_PL (mon): Rename to...
(alt_mon): This.
(abmon): Rename to...
(ab_alt_mon): This.
(mon): Add with proper genitive forms, copy from Wikipedia.
(abmon): Likewise.
Thank you Michal Ostrowski for the feedback.
[BZ #19485]
* localedata/locales/csb_PL (mon): Fix typos:
"łżëkwiôt" -> "łżëkwiat" (April); "lëpinc" -> "lëpińc" (July).
(yesstr): Add, value is "jo".
(nostr): Add, value is "nié".
Commit 5e79e0292b broke m68k after
s_significand.c became available in the build directory. All m68k
implementations of log1p and significand were including s_significand.c
and stopped working after the inclusion of the the auto-generated file.
This patch reorganizes the implementation of log1p and significand for
m680x0 in order to avoid hitting this problem.
* sysdeps/m68k/m680x0/fpu/s_log1p.c: Set as the generic file for
all log1p and significand functions on m680x0.
* sysdeps/m68k/m680x0/fpu/s_log1pf.c: Include s_log1p.c instead
of s_significand.c..
* sysdeps/m68k/m680x0/fpu/s_log1pl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_significandf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_significandl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_significand.c: Move all the code to
s_log1p.c and include it..
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
