Commit Graph

10504 Commits

Author SHA1 Message Date
Joseph Myers
eb3c12c784 Add setpayload, setpayloadf, setpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid.  The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.

The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month).  This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayload): New declaration.
	* math/Versions (setpayload): New libm symbol at version
	GLIBC_2.25.
	(setpayloadf): Likewise.
	(setpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadF.
	* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
	test_Ff_b1_data.
	(RUN_TEST_Ff_b1): New macro.
	(RUN_TEST_LOOP_Ff_b1): Likewise.
	(canonicalize_test_data): Update type.
	(setpayload_test_data): New array.
	(setpayload_test): New function.
	(main): Call setpayload_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayload,
	setpayloadf and setpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
	Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayload.
	(CFLAGS-nldbl-setpayload.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-11-19 00:16:28 +00:00
Adhemerval Zanella
e92bd6e362 Fix hurd __access_noerrno implementation.
This patch fixes some hurd bits from commit afcf3cd8eb that added the
__access_noerrno internal symbol.  It basically removes the nonrequired
__hurd_fail_noerrno (since the 'err' argument is ignored) and fixes
a typo for EACCES.

However, as stated on maillist [1] this __access_noerrno may still be
unsafe to run during initialization of tunables on the Hurd.  The
access_common calls __hurd_file_name_lookup, which calls
__hurd_file_name_lookup_retry, which can set errno.

[1] https://sourceware.org/ml/libc-alpha/2016-11/msg00646.html
2016-11-18 16:49:08 -02:00
Chris Metcalf
c73c7fc07c tile: create new math-tests.h header
The header makes tile use the new mechanisms for suppressing
exception and rounding support (the ROUNDING_TESTS_xxx() and
EXCEPTION_TESTS_xxx macros).

More importantly, it also now sets SNAN_TESTS_PRESERVE_PAYLOAD to 0,
since the tilegx fp hardware does not preserve NaN payloads.
2016-11-18 13:34:47 -05:00
Chris Metcalf
6933f28a64 Make tile's set_dataplane API compatibility-only
The set_dataplane() API in <sys/dataplane.h> originally supported the
Tilera version of Linux as shipped to our customers.  Once we started
upstreaming the dataplane support in the kernel, the API changed
to use fcntl() as part of the current task-isolation patch series.

It doesn't seem like continuing to support the old API is useful
for newly-compiled code, and even supporting the old glibc binary
API on an upstream kernel that supports the new task isolation mode
isn't straightforward, since the semantics have changed in ways that
make it hard to map the old semantics precisely to the new ones,
so just return ENOSYS.
2016-11-18 13:34:01 -05:00
Maciej W. Rozycki
cfaf1949ff MIPS: Add `.insn' to ensure a text label is defined as code not data
Avoid a build error with microMIPS compilation and recent versions of
GAS which complain if a branch targets a label which is marked as data
rather than microMIPS code:

../sysdeps/mips/mips32/crti.S: Assembler messages:
../sysdeps/mips/mips32/crti.S:72: Error: branch to a symbol in another ISA mode
make[2]: *** [.../csu/crti.o] Error 1

as commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of
branch and jump targets") closed a hole in branch processing, making
relocation calculation respect the ISA mode of the symbol referred.
This allowed diagnosing the situation where an attempt is made to pass
control from code assembled for one ISA mode to code assembled for a
different ISA mode and either relaxing the branch to a cross-mode jump
or if that is not possible, then reporting this as an error rather than
letting such code build and then fail unpredictably at the run time.

This however requires the correct annotation of branch targets as code,
because the ISA mode is not relevant for data symbols and is therefore
not recorded for them.  The `.insn' pseudo-op is used for this purpose
and has been supported by GAS since:

Wed Feb 12 14:36:29 1997  Ian Lance Taylor  <ian@cygnus.com>

	* config/tc-mips.c (mips_pseudo_table): Add "insn".
	(s_insn): New static function.
	* doc/c-mips.texi: Document .insn.

so there has been no reason to avoid it where required.  More recently
this pseudo-op has been documented, by the microMIPS architecture
specification[1][2], as required for the correct interpretation of any
code label which is not followed by an actual instruction in an assembly
source.

Use it in our crti.S files then, to mark that the trailing label there
with no instructions following is indeed not a code bug and the branch
is legitimate.

References:

[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
    Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
    Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
    Compatibility", p. 533

[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
    Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
    Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
    Compatibility", p. 623

2016-11-18  Matthew Fortune  <Matthew.Fortune@imgtec.com>
            Maciej W. Rozycki  <macro@imgtec.com>

	* sysdeps/mips/mips32/crti.S (_init): Add `.insn' pseudo-op at
	`.Lno_weak_fn' label.
	* sysdeps/mips/mips64/n32/crti.S (_init): Likewise.
	* sysdeps/mips/mips64/n64/crti.S (_init): Likewise.
2016-11-18 12:44:04 +00:00
Adhemerval Zanella
045c13d185 Consolidate Linux setrlimit and getrlimit implementation
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c.  It contains two exceptions:

  1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
     and higher due a broken RLIM64_INFINITY constant.
  2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
     limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
     change its definition without adding a compat symbol.  This patch does
     not aim to address this possible issue, it follow current symbol
     export.

The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall.  This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation.  Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.

A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports.  This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.

Checked on x86_64, i386, armhf, aarch64, and powerpc64le.  I also did a
sanity build plus check-abi on all other supported architectures.

[1] Commit 9c96ff2385

	Adhemerval Zanella  <adhemerval.zanella@linaro.org>
	Yury Norov  <ynorov@caviumnetworks.com>

	* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
	* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
	(__RLIM_T_MATCHES_RLIM64_T): Likewise.
	* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
	(__RLIM_T_MATCHES_RLIM64_T): Likewise.
	* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
	(__RLIM_T_MATCHES_RLIM64_T): Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
	[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
	* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
	(__RLIM_T_MATCHES_RLIM64_T): Likewise.
	* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
	(sysdep_routines): Remove oldgetrlimit64.
	* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
	(sysdep_routines): Likewise.
	* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
	(sysdep_routines): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
	[$(subdir) = resource] (sysdep_routines): Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
	[$(subdir) = resource] (sysdep_routines): Likewise.
	* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
	* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
	* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
	setrlimit and getrlimit.
	* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/getrlimit.c: New file.
	* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
	* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
	* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
	__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
	(__old_getrlimit64): Add compatibility symbol.
	* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
2016-11-17 15:54:22 -02:00
Joseph Myers
049cc4855a Make Alpha <sys/user.h> self-contained.
The check-installed-headers tests show up that the Alpha <sys/user.h>
is not self-contained, using size_t without including any header that
defines it.  This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.

Tested for Alpha (compilation only).

	* sysdeps/unix/sysv/linux/alpha/sys/user.h: Include <stddef.h>.
2016-11-17 14:15:03 +00:00
Adhemerval Zanella
afcf3cd8eb New internal function __access_noerrno
Implement an internal version of __access called __access_noerrno that
avoids setting errno.  This is useful to check accessibility of files
very early on in process startup i.e. before TLS setup.  This allows
tunables to replace MALLOC_CHECK_ safely (i.e. check existence of
/etc/suid-debug to enable/disable MALLOC_CHECK) and at the same time
initialize very early so that it can override IFUNCs.

Checked on x86_64.

	* hurd/hurd.h (__hurd_fail_noerrno): New function.
	* include/unistd.h [IS_IN (rtld) || !defined SHARED]: Declare
	__access_noerrno.
	* io/access.c (__access_noerrno): New function.
	* sysdeps/mach/hurd/access.c (hurd_fail_seterrno): New function.
	(hurd_fail_seterrno): Likewise.
	(access_common): Likewise.
	(__access_noerrno): Likewise.
	* sysdeps/nacl/access.c (__access_noerrno): Likewise.
	* sysdeps/unix/sysv/linux/access.c (__access_noerrno): Likewise.
	* sysdeps/nacl/nacl-interfaces.h (NACL_CALL_NOERRNO): New
	macro.
2016-11-16 15:53:58 -02:00
Joseph Myers
530862a63e Fix SH4 register-dump.h for soft-float.
This patch fixes SH4 register-dump.h to declare a variable inside the
the build for soft-float.

Tested (compilation only) for SH4 soft-float.

	* sysdeps/unix/sysv/linux/sh/sh4/register-dump.h (register_dump):
	Only declare fpregs if [__SH_FPU_ANY__].
2016-11-16 03:45:49 +00:00
Joseph Myers
f07820b7d1 Make SH ucontext always match current kernels.
As discussed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2015-06/msg00657.html>, there
are various problems with the sigcontext / mcontext / ucontext
structures on SH.  The soft-float SH4 case in fact does not build at
present, with errors processing
sysdeps/unix/sysv/linux/sh/sh4/ucontext_i.sym with gen-as-const.awk
("error: 'mcontext_t {aka struct <anonymous>}' has no member named
'fpregs'").

Linux 4.8 (commit bbe6c77857c38f4acbdc4fc70399515226d1859a) moved to
always using the same sigcontext structure on SH, with room for
floating-point registers whether or not present on the processor.
This patch makes the glibc header match.

Tested (compilation only) for sh4-linux-gnu hard float, and in
conjunction with other fixes for soft float.

	* sysdeps/unix/sysv/linux/sh/sys/ucontext.h [__SH4__ || __SH4A__]:
	Make code unconditional.
	[!(__SH4__ || __SH4A__)]: Remove conditional code.
2016-11-15 21:44:36 +00:00
Florian Weimer
001f81ad1e s390x: Add hidden definition for __sigsetjmp 2016-11-15 15:51:01 +01:00
Joseph Myers
ba1cafea16 Make tilegx32 install libraries in lib32 directories.
This patch makes tilegx32 install libraries in lib32 directories,
matching what GCC expects and avoiding conflict with 64-bit libraries
installed in lib directories.

Tested (compilation only) for tilegx (32-bit and 64-bit, BE and LE,
GCC 5).

	* sysdeps/unix/sysv/linux/tile/tilegx/configure.ac: Use
	LIBC_SLIBDIR_RTLDDIR for tilegx32.
	* sysdeps/unix/sysv/linux/tile/tilegx/configure: Regenerated.
2016-11-14 23:34:54 +00:00
Joseph Myers
8129bf7732 Make SH <sys/user.h> self-contained.
The check-installed-headers tests show up that the SH <sys/user.h> is
not self-contained, using size_t without including any header that
defines it.  This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.

Tested for SH3 and SH4 (compilation only).

	* sysdeps/unix/sysv/linux/sh/sys/user.h: Include <stddef.h>.
2016-11-11 21:04:28 +00:00
Chris Metcalf
a329844ff8 Make sure tilepro uses kernel atomics fo atomic_store
It's not legal for raw stores to be mixed with atomic operations
on tilepro, since the atomics are managed by kernel fast syscalls.
It's possible for a hardware store and a kernel fast atomic to race
with each other in such a way that the hardware store is lost.

Suppose you have an initial zero value, and you race with a store
of 2 and a kernel cmpxchg from 0 to 1.  The legal output is only 2:
either the store hit first and the cmpxchg failed, or the cmpxchg
hit first and succeeded, then was overwritten by the 2.  But if
the kernel cmpxchg starts first and loads the zero, then the store
hits and sets the value to 2, the cmpxchg will still decide it was
successful and write the 1, leaving the value illegally set to 1.

Using atomic_exchange variants to implement atomic_store fixes this
problem for tilepro.
2016-11-10 20:08:24 -05:00
Joseph Myers
b4e75104b4 Refactor some libm type-generic macros.
This patch refactors some type-generic libm macros, in both math.h and
math_private.h, to be based on a common __MATH_TG macro rather than
all replicating similar logic to choose a function to call based on
the type of the argument.

This should serve to illustrate what I think float128 support for such
macros should look like: common macros such as __MATH_TG may need
different definitions depending on whether float128 is supported in
glibc, so that the individual macros themselves do not need
conditionals on float128 support.

Tested for x86_64, x86, mips64 and powerpc.

	* math/math.h (__MATH_TG): New macro.
	[__USE_ISOC99] (fpclassify): Define using __MATH_TG.
	[__USE_ISOC99] (signbit): Likewise.
	[__USE_ISOC99] (isfinite): Likewise.
	[__USE_ISOC99] (isnan): Likewise.
	[__USE_ISOC99] (isinf): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (issignaling): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (__MATH_EVAL_FMT2): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): Define using
	__MATH_TG and __MATH_EVAL_FMT2.
	* sysdeps/generic/math_private.h (fabs_tg): Define using
	__MATH_TG.
	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h
	[!__NO_LONG_DOUBLE_MATH] (__iscanonicalf): New macro.
	[!__NO_LONG_DOUBLE_MATH] (__iscanonical): Likewise.
	[!__NO_LONG_DOUBLE_MATH] (iscanonical): Define using __MATH_TG.
	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (__iscanonicalf): New
	macro.
	(__iscanonical): Likewise.
	(iscanonical): Define using __MATH_TG.
2016-11-10 21:41:56 +00:00
Adhemerval Zanella
0a557c105c Fix sh4 build with __ASSUME_ST_INO_64_BIT redefinition
Since 327792c sh4 builds fails with:

../sysdeps/unix/sysv/linux/kernel-features.h:49:0: error: "__ASSUME_ST_INO_64_BIT" redefined [-Werror]
 #define __ASSUME_ST_INO_64_BIT  1
 ^
In file included from ../sysdeps/unix/sysv/linux/sysdep.h:19:0,
                 from ../sysdeps/unix/sysv/linux/sh/sysdep.h:24,
                 from ../sysdeps/unix/sysv/linux/sh/sh4/sysdep.h:4,
                 from <stdin>:1:
../sysdeps/unix/sysv/linux/sh/kernel-features.h:47:0: note: this is the location of the previous definition
 #define __ASSUME_ST_INO_64_BIT 0

It is because sh4 kernel-features.sh is included multiple times
without guards and this patch fixes by adding them.

Tested on a sh4-linux-gnu build.

	* sysdeps/unix/sysv/linux/sh/kernel-features.h: Add include
	guards.
2016-11-10 18:03:37 -02:00
Adhemerval Zanella
3e06601fed Consolidate Linux access implementation
This patch consolidates the Linux access implementation on
sysdeps/unix/sysv/linux/access.c.  Similar to auto-generation through
syscalls.list, __NR_access is check and __NR_faccessat is used only
for newer architectures (where __NR_access is not defined).

Checked on x86_64.

	* sysdeps/unix/sysv/linux/access.c: New file.
	* sysdeps/unix/sysv/linux/generic/access.c: Remove file.
2016-11-10 16:38:07 -02:00
Steve Ellcey
4589d0715c Add definitions to sysdeps/tile/tilepro/bits/wordsize.h.
* sysdeps/tile/tilepro/bits/wordsize.h: Define __WORDSIZE32_SIZE_ULONG
	and __WORDSIZE32_PTRDIFF_LONG.
2016-11-10 07:46:18 -08:00
Siddhesh Poyarekar
8f3a4687ad Regenerate ULPs for aarch64
* sysdeps/aarch64/libm-test-ulps: Regenerated.
2016-11-10 16:52:35 +05:30
Adhemerval Zanella
d4d8a12960 Consolidate Linux truncate implementations
This patch consolidates all Linux truncate implementation on
sysdeps/unix/sysv/linux/truncate{64}.c.  It is based on
{INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall
construction.

General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not
defined, otherwise ftruncate64 will be build and ftruncate will be an
alias.  The fallocate will use old compat syscall and pass 32-bit off_t
argument, while fallocate64 will handle the correct off64_t passing using
__ALIGNMENT_ARG and SYSCALL_LL64 macros.

Tested on x86_64, i386, aarch64, and armhf.

	* sysdeps/unix/sysv/linux/arm/truncate64.c: Remove file.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/truncate.c: Likewise.
	* sysdeps/sysv/linux/generic/wordsize-32/truncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/truncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/truncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/truncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/truncate.c: New file.
	* sysdeps/unix/sysv/linux/truncate64.c (truncate64): Use
	INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros.
	* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (truncate):
	Remove.
	* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (truncate):
	Likewise.

[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
2016-11-09 17:46:17 -02:00
Adhemerval Zanella
87686aeefd Consolidate Linux ftruncate implementations
THis patch consolidates all Linux ftruncate implementation on
sysdeps/unix/sysv/linux/ftruncate{64}.c.  It is based on
{INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction.

General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not
defined, otherwise ftruncate64 will be build and ftruncate will be an
alias.  The fallocate will use old compat syscall and pass 32-bit off_t
argument, while fallocate64 will handle the correct off64_t passing using
__ALIGNMENT_ARG and SYSCALL_LL64 macros.

Tested on x86_64, i386, aarch64, and armhf.

	* posix/tst-truncate-common.c: New file.
	* posix/tst-truncate.c: Use tst-truncate-common.c.
	* posix/tst-truncate64.c: Likewise and add LFS tests.
	* sysdeps/unix/sysv/linux/arm/ftruncate64.c: Remove file.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate.c: Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/ftruncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/ftruncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/wordsize-64/ftruncate64.c: Likewise.
	* sysdeps/unix/sysv/linux/ftruncate.c: New file.
	* sysdeps/unix/sysv/linux/ftruncate64.c (__ftruncate64): Use
	INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros.
	[__OFF_T_MATCHES_OFF64_T] (ftruncate): Add alias.
	* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (ftruncate):
	Remove.
	* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (ftruncate):
	Likewise.

[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
2016-11-09 17:46:11 -02:00
Joseph Myers
116ae4fe5a Add localplt.data for sh.
This patch adds a localplt.data file for sh so that test passes.  The
architecture-specific entries are for _Unwind_Find_FDE, _exit and
__errno_location.

Tested for sh3 and sh4.

	* sysdeps/unix/sysv/linux/sh/localplt.data: New file.
2016-11-08 23:43:17 +00:00
Joseph Myers
2d5a67dc89 Add localplt.data for hppa.
This patch adds a localplt.data file for hppa so that test passes.
Architecture maintainers should feel free to clean up the sysdeps code
so that some or all of the system-specific entries

libc.so: _exit
libc.so: __sigsetjmp
libc.so: _IO_funlockfile
libc.so: sigprocmask
libc.so: __errno_location
libpthread.so: __errno_location

are no longer needed.

Tested for hppa.  Note: check-execstack and check-textrel still fail;
you may wish to look at those to get to a clean baseline there (they
are less obvious for people not familiar with the architecture).

	* sysdeps/unix/sysv/linux/hppa/localplt.data: New file.
2016-11-08 23:42:36 +00:00
Joseph Myers
58d6b0d865 Update alpha localplt.data.
This patch updates alpha localplt.data so the localplt test passes in
my compile-only all-ABIs glibc testing.  The failures I see without
this patch are:

Missing required PLT reference: ld.so: __tls_get_addr
Missing required PLT reference: ld.so: free

Now, __tls_get_addr can be made optional.  For free, rather than
making it optional as in libc.so it seems better to mark all the
malloc-related symbols in both libc.so and ld.so as allowing an
R_ALPHA_GLOB_DAT relocation as an alternative to using a PLT entry, so
this patch does so.

Tested for alpha.

	* sysdeps/unix/sysv/linux/alpha/localplt.data: Make __tls_get_addr
	optional in ld.so.  Allow R_ALPHA_GLOB_DAT relocation for malloc,
	calloc, realloc, free, memalign and __libc_memalign rather than
	making them optional.
2016-11-08 23:41:51 +00:00
Joseph Myers
38d84a0f37 Update nios2 localplt.data.
This patch updates nios2 localplt.data so the localplt test passes in
my compile-only all-ABIs glibc testing.  A new PLT entry for
__extendsfdf2 is added.

Tested for nios2.

	* sysdeps/unix/sysv/linux/nios2/localplt.data: Add __extendsfdf2
	for libc.so.
2016-11-08 23:41:05 +00:00
Adhemerval Zanella
3c7f1f59cd Consolidate lseek/lseek64/llseek implementations
This patch consolidates all Linux lseek/lseek64/llseek implementation
in on on sysdeps/unix/sysv/linux/lseek{64}.c.  It also removes the llseek
file and instead consolidate the LFS lseek implementation on lseek64.c
as for other LFS symbols implementations.

The general idea is:

  - lseek: ABIs that not define __OFF_T_MATCHES_OFF64_T will preferable
  use __NR__llseek if kernel supports it, otherwise they will use __NR_lseek.
  ABIs that defines __OFF_T_MATCHES_OFF64_T won't produce any symbol.

  - lseek64: ABIs with __OFF_T_MATCHES_OFF64_T will preferable use __NR_lseek
  (since it will use 64-bit arguments without low/high splitting) and
  __NR__llseek if __NR_lseek is not defined (for some ILP32 ports).

  - llseek: files will be removed and symbols will be aliased ot lseek64.

ABI without __OFF_T_MATCHES_OFF64_T and without __NR_llseek (basically MIPS64n32
so far) are covered by building lseek with off_t as expected and lseek64
using __NR_lseek (as expected for off64_t being passed using 64-bit registers).

For this consolidation I mantained the x32 assembly specific implementation
because to correctly fix this it would required both the x32 fix for
{INLINE,INTERNAL}_SYSCALL [1] and a wrapper to correctly subscribe it to
return 64 bits instead of default 32 bits (as for times).  It could a future
cleanup.

It is based on my previous {INTERNAL,INLINE}_SYSCALL_CALL macro [2],
although it is mainly for simplification.

Tested on x86_64, i686, aarch64, armhf, and powerpc64le.

	* nptl/Makefile (libpthread-routines): Remove ptw-llseek and add
	ptw-lseek64.
	* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek.
	* sysdeps/unix/sysv/linux/alpha/Makefile  (sysdeps_routines):
	Likewise.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/llseek.c: Remove file.
	* sysdeps/unix/sysv/linux/generic/wordsize-32/lseek.c: Remove file.
	* sysdeps/unix/sysv/linux/mips/mips64/llseek.c: Likewise.
	* sysdeps/unix/sysv/linux/llseek.c: Remove file.
	* sysdeps/unix/sysv/linux/lseek.c: New file.
	* sysdeps/unix/sysv/linux/lseek64.c: Add default Linux implementation.
	* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: Remove lseek and
	__libc_lseek64 from auto-generation.
	* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/lseek64.S: New file.

[1] https://sourceware.org/ml/libc-alpha/2016-08/msg00443.html
[2] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html
2016-11-08 16:04:33 -02:00
Steve Ellcey
327792ce57 Define __ASSUME_ST_INO_64_BIT on all platforms.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h: #define
	  __ASSUME_ST_INO_64_BIT as 0
	* sysdeps/unix/sysv/linux/sh/kernel-features.h: Likewise.
	* sysdeps/unix/sysv/linux/fxstat64.c: Replace #ifdef with #if
	  over the code where __ASSUME_ST_INO_64_BIT is used.
	* sysdeps/unix/sysv/linux/lxstat64.c: Likewise.
	* sysdeps/unix/sysv/linux/xstat64.c: Likewise.
	* sysdeps/unix/sysv/linux/xstatconv.c: Likewise.
2016-11-07 13:26:27 -08:00
Florian Weimer
c74940f2a7 nptl: Document the reason why __kind in pthread_mutex_t is part of the ABI 2016-11-07 20:24:32 +01:00
Adhemerval Zanella
6d1774146f Fix sparc build due missing __WORDSIZE_TIME64_COMPAT32 definition
This patch adds the missing Linux sparc definitions from d060cd0.
Both value are copied from default sparc value [1] and with this
fix now both sparc 32 and 64 bits builds on Linux.

	* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
	(__WORDSIZE_TIME64_COMPAT32): Define for both 32 and  64 bits.

[1] sysdeps/sparc/sparc{32,64}/bits/wordsize.h
2016-11-04 18:10:42 -02:00
Joseph Myers
860aacdad2 Fix alpha sqrt fegetenv namespace (bug 20768).
On alpha, sqrt (a C90 function) brings in references to fegetenv
(C99), resulting in linknamespace test failures:

[initial] __sqrt -> [libm.a(w_sqrt.o)] __ieee754_sqrt ->
[libm.a(e_sqrt.o)] __feholdexcept -> [libm.a(feholdexcpt.o)] fegetenv

This patch fixes this by making __feholdexcept call __fegetenv instead
of fegetenv.

Tested for Alpha (compilation only).

	[BZ #20768]
	* sysdeps/alpha/fpu/feholdexcpt.c (__feholdexcept): Call
	__fegetenv instead of fegetenv.
2016-11-04 17:19:13 +00:00
Joseph Myers
799131036e Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139).
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual).  This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.

This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file.  The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.

Tested for x86_64.

	[BZ #14139]
	* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
	(find_files): Obtain platform name from libm-test-ulps-name and
	store in %pplatforms.
	(canonicalize_platform): Remove.
	(print_platforms): Use $pplatforms directly.
	(by_platforms): Do not allow for platforms missing from
	%pplatforms.
	* sysdeps/aarch64/libm-test-ulps-name: New file.
	* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/arm/libm-test-ulps-name: Likewise.
	* sysdeps/generic/libm-test-ulps-name: Likewise.
	* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
	* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/microblaze/libm-test-ulps-name: Likewise.
	* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
	* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
	* sysdeps/nios2/libm-test-ulps-name: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/sh/libm-test-ulps-name: Likewise.
	* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/tile/libm-test-ulps-name: Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
2016-11-04 16:49:06 +00:00
Joseph Myers
94bf0b4ac9 Make MIPS <sys/user.h> self-contained.
The check-installed-headers tests show up that the MIPS <sys/user.h>
is not self-contained, using size_t without including any header that
defines it.  This patch fixes it by including <stddef.h>, as done for
other architectures' versions of this header.

Tested for MIPS (all 24 ABIs, compilation only).

	* sysdeps/unix/sysv/linux/mips/sys/user.h: Include <stddef.h>.
2016-11-04 16:44:23 +00:00
Joseph Myers
7672e712e1 XFAIL check-execstack for MIPS.
This patch marks the check-execstack test as expected to fail for
MIPS, with a comment referencing previous RFC discussion of the
changes that would be needed to support non-executable stacks on MIPS.

Tested for MIPS (all 24 ABIs).

	* sysdeps/unix/sysv/linux/mips/Makefile [$(subdir) = elf]
	(test-xfail-check-execstack): New variable.
2016-11-04 16:42:37 +00:00
Joseph Myers
a2049e7ab2 Add localplt.data for MIPS.
This patch adds a localplt.data file for MIPS, reflecting the
peculiarities of MIPS ELF that mean this test cannot detect PLT
entries (there aren't any in shared libraries), not GOT entries
(because of the implicit relocation).

Tested for MIPS (all 24 ABIs).

	* sysdeps/mips/localplt.data: New file.
2016-11-04 16:40:54 +00:00
Steve Ellcey
d060cd002d Define wordsize.h macros everywhere
* bits/wordsize.h: Add documentation.
	* sysdeps/aarch64/bits/wordsize.h : New file
	* sysdeps/generic/stdint.h (PTRDIFF_MIN, PTRDIFF_MAX): Update
	definitions.
	(SIZE_MAX): Change ifdef to if in __WORDSIZE32_SIZE_ULONG check.
	* sysdeps/gnu/bits/utmp.h (__WORDSIZE_TIME64_COMPAT32): Check
	with #if instead of #ifdef.
	* sysdeps/gnu/bits/utmpx.h (__WORDSIZE_TIME64_COMPAT32): Ditto.
	* sysdeps/mips/bits/wordsize.h (__WORDSIZE32_SIZE_ULONG,
	__WORDSIZE32_PTRDIFF_LONG, __WORDSIZE_TIME64_COMPAT32):
	Add or change defines.
	* sysdeps/powerpc/powerpc32/bits/wordsize.h: Likewise.
	* sysdeps/powerpc/powerpc64/bits/wordsize.h: Likewise.
	* sysdeps/s390/s390-32/bits/wordsize.h: Likewise.
	* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
	* sysdeps/sparc/sparc32/bits/wordsize.h: Likewise.
	* sysdeps/sparc/sparc64/bits/wordsize.h: Likewise.
	* sysdeps/tile/tilegx/bits/wordsize.h: Likewise.
	* sysdeps/tile/tilepro/bits/wordsize.h: Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: Likewise.
	* sysdeps/wordsize-32/bits/wordsize.h: Likewise.
	* sysdeps/wordsize-64/bits/wordsize.h: Likewise.
	* sysdeps/x86/bits/wordsize.h: Likewise.
2016-11-04 09:37:44 -07:00
Wilco Dijkstra
95e431cc73 An optimized memchr was missing for AArch64. This version is similar to
strchr and is significantly faster than the C version.

2016-11-04  Wilco Dijkstra  <wdijkstr@arm.com>
	    Kevin Petit  <kevin.petit@arm.com>

	* sysdeps/aarch64/memchr.S (__memchr): New file.
2016-11-04 14:37:10 +00:00
Joseph Myers
9a2835df5c Handle tilegx* machine names.
This patch makes sysdeps/tile/preconfigure handle tilegx* machine
names instead of just plain tilegx.  That matches GCC, and in
particular allows a big-endian toolchain to use the tilegxbe-linux-gnu
name when configuring both GCC and glibc.

Tested with compilation for tilegxbe-linux-gnu, both 32-bit and 64-bit
(building a subsequent GCC against that glibc still falls over because
of both 32-bit and 64-bit libraries going in the lib directory, as
noted at
<https://sourceware.org/ml/libc-alpha/2016-11/msg00129.html>).

	* sysdeps/tile/preconfigure: Accept tilegx* instead of tilegx.
2016-11-04 13:32:06 +00:00
Brent W. Baccala
561ff1ec42 hurd: Fix spurious port deallocation
* sysdeps/mach/hurd/dl-sysdep.c (__mmap): Do not deallocate memobj_wr
when it is MACH_PORT_NULL.
2016-10-31 17:32:25 +01:00
Tulio Magno Quites Machado Filho
739e14f900 Document a behavior of an elided pthread_rwlock_unlock
Explain that pthread_rwlock_unlock may crash if called on a lock not
held by the current thread.
2016-10-28 19:13:21 -02:00
Tulio Magno Quites Machado Filho
ce193f551e powerpc: Fix TOC stub on powerpc64 clone()
Use a function call to _exit() so that the linker can create a TOC stub
instead of just a branch.

Tested on powerpc64.
2016-10-28 19:13:21 -02:00
Florian Weimer
09472915dd crypt: Use internal names for the SHA-2 block functions
These functions are externally visible with a static libcrypt
library.
2016-10-28 21:49:21 +02:00
H.J. Lu
0e6d3adc60 Check IFUNC definition in unrelocated shared library [BZ #20019]
Calling an IFUNC function defined in unrelocated shared library may
lead to segfault.  This patch issues an error message to request
relinking the shared library if it references IFUNC function defined
in the unrelocated shared library.

	[BZ #20019]
	* sysdeps/i386/dl-machine.h (elf_machine_rel): Check IFUNC
	definition in unrelocated shared library.
	* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
2016-10-28 09:12:15 -07:00
Florian Weimer
6b1df8b27f i386: Support CFLAGS which imply -fno-omit-frame-pointer [BZ #20729] 2016-10-28 17:09:09 +02:00
David S. Miller
61668b22f5 Fix a sparc header conformtest failure.
* sysdeps/unix/sysv/linux/sparc/sys/user.h: Include stddef.h
2016-10-27 07:57:49 -07:00
Joseph Myers
eaf5ad0bc4 Add canonicalize, canonicalizef, canonicalizel.
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation.  This patch implements
these functions for glibc.

As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations.  However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value).  Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations.  Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.

The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format.  Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".

libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them).  As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0.  (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)

The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(canonicalize): New declaration.
	* math/Versions (canonicalize): New libm symbol at version
	GLIBC_2.25.
	(canonicalizef): Likewise.
	(canonicalizel): Likewise.
	* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
	* math/s_canonicalize_template.c: New file.
	* math/libm-test.inc: Update comment on functions tested and
	testing of NaN payloads.
	(TEST_NAN_PAYLOAD): New macro.
	(NO_TEST_INLINE): Update value.
	(XFAIL_TEST): Likewise.
	(ERRNO_UNCHANGED): Likewise.
	(ERRNO_EDOM): Likewise.
	(ERRNO_ERANGE): Likewise.
	(IGNORE_RESULT): Likewise.
	(NON_FINITE): Likewise.
	(TEST_SNAN): Likewise.
	(NO_TEST_MATHVEC): Likewise.
	(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
	(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
	(struct test_Ffp_b1_data): New type.
	(RUN_TEST_Ffp_b1): New macro.
	(RUN_TEST_LOOP_Ffp_b1): Likewise.
	(canonicalize_test_data): New array.
	(canonicalize_test): New function.
	(main): Call canonicalize_test.
	* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
	canonicalizef and canonicalizel.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	canonicalize.
	(CFLAGS-nldbl-canonicalize.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
	to ...
	* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
	... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
	test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
	Use libm_hidden_def.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
	* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
	test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
	* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
	libm_hidden_def.
	* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
	macro.
	* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
	(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2016-10-26 23:14:31 +00:00
Joseph Myers
873febb5df Add getpayloadl to libnldbl.
This patch adds getpayloadl to libnldbl, missed in my patch that
originally implemented getpayload functions.

Tested for powerpc.

	* sysdeps/ieee754/ldbl-opt/nldbl-getpayload.c: New file.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	getpayload.
	(CFLAGS-nldbl-getpayload.c): New variable.
2016-10-26 17:10:00 +00:00
Gabriel F. T. Gomes
6962682ffe Add strfromd, strfromf, and strfroml functions
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml.  This is being done in
preparation for the new floating-point type, float128.  The added functions
convert a floating-point value into a string, with configurable format.
2016-10-25 17:03:54 -02:00
Joseph Myers
78b7adbaea Fix cmpli usage in power6 memset.
Building glibc for powerpc64 with recent (2.27.51.20161012) binutils,
with multi-arch enabled, I get the error:

../sysdeps/powerpc/powerpc64/power6/memset.S: Assembler messages:
../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (5 is not between 0 and 1)
../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (128 is not between 0 and 31)
../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: missing operand

Indeed, cmpli is documented as a four-operand instruction, and looking
at nearby code it seems likely cmpldi was intended.  This patch fixes
this powerpc64 code accordingly, and makes a corresponding change to
the powerpc32 code.

Tested for powerpc, powerpc64 and powerpc64le by Tulio Magno Quites
Machado Filho

	* sysdeps/powerpc/powerpc32/power6/memset.S (memset): Use cmplwi
	instead of cmpli.
	* sysdeps/powerpc/powerpc64/power6/memset.S (memset): Use cmpldi
	instead of cmpli.
2016-10-25 15:54:16 +00:00
Yury Norov
20973cf442 * sysdeps/unix/sysv/linux/fxstat.c: Remove useless cast.
* sysdeps/unix/sysv/linux/lxstat.c: Likewise.
	* sysdeps/unix/sysv/linux/xstat.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/fxstat.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/lxstat.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/xstat.c: Likewise.
2016-10-24 14:36:53 -07:00
Adhemerval Zanella
2152cf7eda Fix Linux sh4 pread/pwrite argument passing
Although conceptually correct for p{read,write}{64} offset argument passing,
sh4 implementation does not generate the correct expected code.  The
__ALIGNMENT_ARG redefinition is incorrect for two reasons: 1. the
kernel-features.h header is included multiple times (since it contains no
guards) and 2. the value it redefines is also incorrect (should be '0, '
instead of empty definition).

This patch fixes it by adding another macro, SYSCALL_LL_PRW{64}, meant to be
used to pass the offset argument on p{read,write}64.  It is basically the
already define SYSCALL_LL{64} plus __ALIGNMENT_ARG unless __ASSUME_PRW_DUMMY_ARG
is define.  In this case an empty dummy argument is used regardless how
__ALIGNMENT_ARG is defined (sh4 case).

Checked on x86_64, i686, aarch64, armhf, and powerpc64le (basically a sanity
check).  Also, John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> and
James Clarke <jrtc27@jrtc27.com> help me check on a debian sh4 bootstrap using
2.24 plus this patch to verify it also corrected fixed the regression issue.

I also verified the generated object for a 2.24 build and master with this
patch for sh4 and both look identical.

	* sysdeps/unix/sysv/linux/pread.c (__libc_pread): Use SYSCALL_LL_PRW.
	* sysdeps/unix/sysv/linux/pwrite.c (__libc_pwrite): Likewise.
	* sysdeps/unix/sysv/linux/pread64.c (__libc_pread64): Use
	SYSCALL_LL64_PRW.
	* sysdeps/unix/sysv/linux/pwrite64.c (__libc_pwrite64): Likewise.
	* sysdeps/unix/sysv/linux/sh/kernel-features.h: Define
	__ASSUME_PRW_DUMMY_ARG.
	* sysdeps/unix/sysv/linux/sh/pread.c: Remove file.
	* sysdeps/unix/sysv/linux/sh/pread64.c: Likewise.
	* sysdeps/unix/sysv/linux/sh/pwrite.c: Likewise.
	* sysdeps/unix/sysv/linux/sh/pwrite64.c: Likewise.
	* sysdeps/unix/sysv/linux/sysdep.h: Define SYSCALL_LL_PRW and
	SYSCALL_LL_PRW64 based on __ASSUME_PRW_DUMMY_ARG.
2016-10-24 15:26:42 -02:00