Commit Graph

32 Commits

Author SHA1 Message Date
Siddhesh Poyarekar
30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30
H.J. Lu
efbbd9c33a ldconfig/x86: Store ISA level in cache and aux cache
Store ISA level in the portion of the unused upper 32 bits of the hwcaps
field in cache and the unused pad field in aux cache.  ISA level is stored
and checked only for shared objects in glibc-hwcaps subdirectories.  The
shared objects in the default directories aren't checked since there are
no fallbacks for these shared objects.

Tested on x86-64-v2, x86-64-v3 and x86-64-v4 machines with
--disable-hardcoded-path-in-tests and --enable-hardcoded-path-in-tests.
2021-01-13 05:51:17 -08:00
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Florian Weimer
b44ac4f4c7 elf: Process glibc-hwcaps subdirectories in ldconfig
Libraries from these subdirectories are added to the cache
with a special hwcap bit DL_CACHE_HWCAP_EXTENSION, so that
they are ignored by older dynamic loaders.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2020-12-04 09:16:41 +01:00
Florian Weimer
db07fae825 elf: Introduce enum opt_format in the ldconfig implementation
Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2020-11-26 18:26:52 +01:00
Florian Weimer
2034c70e64 elf: Include <stddef.h> (for size_t), <sys/stat.h> in <ldconfig.h>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-06-25 16:51:03 +02:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Palmer Dabbelt
fb58aac5fe
Add support for the RISC-V-specific ELF flags
The RISC-V port defines ELF flags that enforce compatibility between
various objects.  This adds the shared support necessary for these
flags.

2018-01-25  Palmer Dabbelt  <palmer@sifive.com>

        * elf/cache.c (print_entry): Add FLAG_RISCV_FLOAT_ABI_SOFT and
        FLAG_RISCV_FLOAT_ABI_DOUBLE.
        * elf/elf.h (EF_RISCV_RVC): New define.
        (EF_RISCV_FLOAT_ABI): Likewise.
        (EF_RISCV_FLOAT_ABI_SOFT): Likewise.
        (EF_RISCV_FLOAT_ABI_SINGLE): Likewise.
        (EF_RISCV_FLOAT_ABI_DOUBLE): Likewise.
        (EF_RISCV_FLOAT_ABI_QUAD): Likewise.
        * sysdeps/generic/ldconfig.h (FLAG_RISCV_FLOAT_ABI_SOFT): New
        define.
        (FLAG_RISCV_FLOAT_ABI_DOUBLE): Likewise.
2018-01-25 10:06:19 -08:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Maciej W. Rozycki
9c21573c02 MIPS: IEEE 754-2008 NaN encoding support
It has been a long practice for software using IEEE 754 floating-point
arithmetic run on MIPS processors to use an encoding of Not-a-Number
(NaN) data different to one used by software run on other processors.
And as of IEEE 754-2008 revision [1] this encoding does not follow one
recommended in the standard, as specified in section 6.2.1, where it
is stated that quiet NaNs should have the first bit (d1) of their
significand set to 1 while signalling NaNs should have that bit set to
0, but MIPS software interprets the two bits in the opposite manner.

As from revision 3.50 [2][3] the MIPS Architecture provides for
processors that support the IEEE 754-2008 preferred NaN encoding format.
As the two formats (further referred to as "legacy NaN" and "2008 NaN")
are incompatible to each other, tools have to provide support for the
two formats to help people avoid using incompatible binary modules.

The change is comprised of two functional groups of features, both of
which are required for correct support.

1. Dynamic linker support.

   To enforce the NaN encoding requirement in dynamic linking a new ELF
   file header flag has been defined.  This flag is set for 2008-NaN
   shared modules and executables and clear for legacy-NaN ones.  The
   dynamic linker silently ignores any incompatible modules it
   encounters in dependency processing.

   To avoid unnecessary processing of incompatible modules in the
   presence of a shared module cache, a set of new cache flags has been
   defined to mark 2008-NaN modules for the three ABIs supported.
   Changes to sysdeps/unix/sysv/linux/mips/readelflib.c have been made
   following an earlier code quality suggestion made here:

   http://sourceware.org/ml/libc-ports/2009-03/msg00036.html

   and are therefore a little bit more extensive than the minimum
   required.

   Finally a new name has been defined for the dynamic linker so that
   2008-NaN and legacy-NaN binaries can coexist on a single system that
   supports dual-mode operation and that a legacy dynamic linker that
   does not support verifying the 2008-NaN ELF file header flag is not
   chosen to interpret a 2008-NaN binary by accident.

2. Floating environment support.

   IEEE 754-2008 features are controlled in the Floating-Point Control
   and Status (FCSR) register and updates are needed to floating
   environment support so that the 2008-NaN flag is set correctly and
   the kernel default, inferred from the 2008-NaN ELF file header flag
   at the time an executable is loaded, respected.

As the NaN encoding format is a property of GCC code generation that is
both a user-selected GCC configuration default and can be overridden
with GCC options, code that needs to know what NaN encoding standard it
has been configured for checks for the __mips_nan2008 macro that is
defined internally by GCC whenever the 2008-NaN mode has been selected.
This mode is determined at the glibc configuration time and therefore a
few consistency checks have been added to catch cases where compilation
flags have been overridden by the user.

The 2008 NaN set of features relies on kernel support as the in-kernel
floating-point emulator needs to be aware of the NaN encoding used even
on hard-float processors and configure the FPU context according to the
value of the 2008 NaN ELF file header flag of the executable being
started.  As at this time work on kernel support is still in progress
and the relevant changes have not made their way yet to linux.org master
repository.

Therefore the minimum version supported has been artificially set to
10.0.0 so that 2008-NaN code is not accidentally run on a Linux kernel
that does not suppport it.  It is anticipated that the version is
adjusted later on to the actual initial linux.org kernel version to
support this feature.  Legacy NaN encoding support is unaffected, older
kernel versions remain supported.

[1] "IEEE Standard for Floating-Point Arithmetic", IEEE Computer
    Society, IEEE Std 754-2008, 29 August 2008

[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
    MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
    MD00082, Revision 3.50, September 20, 2012

[3] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
    MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
    MD00083, Revision 3.50, September 20, 2012
2013-09-18 21:33:50 +01:00
Ryan S. Arnold
e054f49430 Add #include <stdint.h> for uint[32|64]_t usage (except installed headers). 2013-05-16 11:32:54 -05:00
Mike Frysinger
6ff444c418 unify xmalloc prototypes & friends
These prototypes are duplicated in many places.  Add a dedicated
header for holding prototypes for program-specific functions to
avoid that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-02-18 17:16:05 -05:00
Carlos O'Donell
b39949d211 ARM: Support loading unmarked objects from cache.
ARM now supports loading unmarked objects from
the dynamic loader cache. Unmarked objects can
be used with the hard-float or soft-float ABI.
We must support loading unmarked objects during
the transition period from a binutils that does
not mark objects to one that does mark them with
the correct ELF flags.

Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-02-08 12:26:12 -05:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Steve McIntyre
1f51ee9246 Add ldconfig cache tag handling for AArch64
* sysdeps/generic/ldconfig.h (FLAG_AARCH64_LIB64): New macro.
	* elf/cache.c (print_entry): Print ",AArch64" for
	FLAG_AARCH64_LIB64.

Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
2012-11-19 01:22:33 -05:00
Steve McIntyre
6665d4a25d Add ldconfig cache tag handling for ARM hard-float ABI
* sysdeps/generic/ldconfig.h (FLAG_ARM_LIBHF): New macro.
	* elf/cache.c (print_entry): Print ",hard-float" for
	FLAG_ARM_LIBHF.

Signed-off-by: Steve McIntyre <steve.mcintyre@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@systemhalted.org>
2012-11-19 01:12:53 -05:00
H.J. Lu
f1a77b01f4 Add x32 support to ldconfig 2012-03-16 15:20:45 -07:00
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Ulrich Drepper
ec09c1c410 Optimize xmalloc, xcalloc, xrealloc, and xstrdup
Add alloc_size attribute and apply consistently the malloc attribute
to xmalloc, xcalloc, xrealloc, and xstrdup.
2012-01-08 21:19:43 -05:00
Ulrich Drepper
27d9ffda17 2007-08-01 Andreas Jaeger <aj@suse.de>
Jakub Jelinek  <jakub@redhat.com>

	* elf/ldconfig.c (opt_ignore_aux_cache): Add new option.
	(options): Add option.
	(parse_opt): Handle option.
	(manual_link): Adjust process_file caller.  Call implicit_soname.
	(search_dir): Formatting.  Use and populate auxiliary cache.
	(main): Load and save auxiliary cache.
	* elf/readlib.c (process_file): Add stat_buf argument.  Pass struct
	stat64 from fstat64 to caller.
	(implicit_soname): New function.
	* elf/readelflib.c (process_elf_file): If DT_SONAME is not present,
	leave *soname as NULL.
	* elf/cache.c: Include libgen.h.
	(print_entry, print_cache, compare, save_cache, add_to_cache):
	Formatting and cleanups.
	(aux_cache_entry_id, aux_cache_entry, aux_cache_file_entry,
	aux_cache_file): New structures.
	(AUX_CACHEMAGIC): Define.
	(primes): New array.
	(aux_hash_size, aux_hash): New variables.
	(aux_cache_entry_id_hash, nextprime, init_aux_cache,
	search_aux_cache, insert_to_aux_cache, add_to_aux_cache,
	load_aux_cache, save_aux_cache): New functions.
	* sysdeps/generic/ldconfig.h (_PATH_LDCONFIG_AUX_CACHE): Define.
	(init_aux_cache, search_aux_cache, add_to_aux_cache,
	load_aux_cache, save_aux_cache, implicit_soname): New prototypes.
	(process_file): Adjust prototype.
2007-08-12 20:09:16 +00:00
Alexandre Oliva
b5bac573e6 * sysdeps/generic/ldconfig.h (FLAG_MIPS64_LIBN32, FLAG_MIPS64_LIBN64): Define. * elf/cache.c (print_entry): Handle mips64 n32 and n64.
* sysdeps/generic/ldconfig.h (FLAG_MIPS64_LIBN32,
	FLAG_MIPS64_LIBN64): Define.
	* elf/cache.c (print_entry): Handle mips64 n32 and n64.

2003-03-14  Alexandre Oliva  <aoliva@redhat.com>
2003-03-14 05:32:50 +00:00
Roland McGrath
48c5307058 * sysdeps/generic/ldconfig.h (FLAG_POWERPC_LIB64) New macro.
* elf/cache.c (print_entry): Add case for FLAG_POWERPC_LIB64.
	Remove per-machine conditionals for FLAG_* cases.
	* sysdeps/unix/sysv/linux/powerpc/ldconfig.h: New file.
	* sysdeps/unix/sysv/linux/powerpc/readelflib.c: New file.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/dl-cache.h: New file.
2002-09-14 09:00:42 +00:00
Andreas Jaeger
41bdb6e20c Update to LGPL v2.1.
2001-07-06  Paul Eggert  <eggert@twinsun.com>

	* manual/argp.texi: Remove ignored LGPL copyright notice; it's
	not appropriate for documentation anyway.
	* manual/libc-texinfo.sh: "Library General Public License" ->
	"Lesser General Public License".

2001-07-06  Andreas Jaeger  <aj@suse.de>

	* All files under GPL/LGPL version 2: Place under LGPL version
	2.1.
2001-07-06 04:58:11 +00:00
Ulrich Drepper
96c0d65dc3 Update.
* elf/cache.c: Mark and have translated a few more messages.

2001-03-19  Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* elf/cache.c: Add case for FLAG_S390_LIB64.
	* sysdeps/generic/ldconfig.h: Add define for FLAG_S390_LIB64.
	* sysdeps/unix/sysv/linux/s390/ldconfig.h: New file.
	* sysdeps/unix/sysv/linux/s390/readelflib.c: New file.

2001-03-19  Ulrich Drepper  <drepper@redhat.com>
2001-03-19 22:08:34 +00:00
Ulrich Drepper
a986484f67 Update.
2001-03-12  Jakub Jelinek  <jakub@redhat.com>

	* csu/Makefile (abi-tag.h): Define OS and version separately, allow
	version to be overriden from config.h.
	* csu/abi-note.S: Use OS and version separately, include config.h.
	* elf/dl-load.c (_dl_osversion): New.
	(_dl_map_object_from_fd): Kill some warnings.
	(open_verify): Check .note.ABI-tag of the library if present.
	* elf/Makefile (CPPFLAGS-dl-load.c): Add -I$(csu-objpfx).
	* elf/cache.c (struct cache_entry): Add osversion.
	(print_entry): Print osversion.
	(print_cache): Pass osversion to it.
	(compare): Sort according to osversion.
	(save_cache): Set osversion.
	(add_to_cache): Add osversion argument.
	* sysdeps/generic/ldconfig.h (add_to_cache, process_file,
	process_elf_file): Add osversion argument.
	* elf/readlib.c (process_file): Likewise.
	* sysdeps/generic/readelflib.c (process_elf_file): Likewise.
	* sysdeps/unix/sysv/linux/ia64/readelflib.c (process_elf_file,
	process_elf32_file, process_elf64_file): Likewise.
	* sysdeps/unix/sysv/linux/i386/readelflib.c (process_elf_file,
	process_elf32_file, process_elf64_file): Likewise.
	* sysdeps/unix/sysv/linux/sparc/readelflib.c (process_elf_file,
	process_elf32_file, process_elf64_file): Likewise.
	* elf/ldconfig.c (manual_link): Pass it.
	(search_dir): Issue diagnostic if two libs with the same soname in
	the same directory have different .note.ABI-tag.  Record osversion in
	dlib_entry and use it from there.
	(struct lib_entry): Remove.
	(struct dlib_entry): Add osversion.
	* sysdeps/generic/dl-cache.c (_dl_load_cache_lookup): Check
	osversion.
	* sysdeps/generic/dl-cache.h (struct file_entry_new): Replace __unused
	field with osversion.
	* sysdeps/generic/ldsodefs.h (_dl_osversion): Declare.
	* sysdeps/unix/sysv/linux/init-first.c: Include ldsodefs.h.
	* sysdeps/unix/sysv/linux/dl-osinfo.h (DL_SYSDEP_OSCHECK): Save kernel
	version in _dl_osversion.
	* sysdeps/unix/sysv/linux/configure.in: Define __ABI_TAG_VERSION.
	* Makerules (build-shlib-helper, build-module-helper): New.
	(build-shlib, build-module-helper): Make sure .note.ABI-tag comes
	early.
	* config.h.in (__ABI_TAG_VERSION): Add.
	* elf/dl-minimal.c (__strtoul_internal): Set endptr on return.
	* sysdeps/unix/sysv/linux/i386/dl-librecon.h (EXTRA_LD_ENVVARS):
	Handle LD_ASSUME_KERNEL.
	* sysdeps/unix/sysv/linux/dl-librecon.h: New.
2001-03-16 07:40:05 +00:00
Ulrich Drepper
667b057725 Update.
2001-03-07  David Mosberger  <davidm@hpl.hp.com>

	* sysdeps/ia64/bits/fenv.h (FE_NONIEEE_ENV): New macro.

2001-03-07  Jes Sorensen  <jes@linuxcare.com>

	* sysdeps/unix/sysv/linux/ia64/ioperm.c (_ioperm): Remove unused
	variables addr & len.

2001-02-22  Jes Sorensen  <jes@linuxcare.com>

	* sysdeps/ia64/fpu/feenablxcpt.c (feenableexcept): Remove
	punctuation in asm constraint.

2001-03-07  Mark Kettenis  <kettenis@gnu.org>

	* resolv/netdb.h [__USE_GNU]: Define __need_timespec and include
	<time.h> to get definition of `struct timespec'.

2001-03-08  Jakub Jelinek  <jakub@redhat.com>

	* elf/rtld.c (dl_main): If tracing, warn about undefined symbols if
	LD_WARN=1, not if LD_WARN is unset.

2001-03-07  Andreas Schwab  <schwab@suse.de>

	* elf/ldconfig.h: Moved to ...
	* sysdeps/generic/ldconfig.h: ... here.
	* sysdeps/unix/sysv/linux/i386/ldconfig.h: New file.
	* sysdeps/unix/sysv/linux/m68k/ldconfig.h: New file.
	* sysdeps/unix/sysv/linux/ia64/ldconfig.h: New file.
	* elf/readlib.c (interpreters, known_libs): Use
	SYSDEP_KNOWN_INTERPRETER_NAMES and SYSDEP_KNOWN_LIBRARY_NAMES
	instead of hard coding old names.
2001-03-10 16:40:59 +00:00