By aligning its implementation on pthread_cond_wait.
* sysdeps/htl/sem-timedwait.c (cancel_ctx): New structure.
(cancel_hook): New function.
(__sem_timedwait_internal): Check for cancellation and register
cancellation hook that wakes the thread up, and check again for
cancellation on exit.
* nptl/tst-cancel13.c, nptl/tst-cancelx13.c: Move to...
* sysdeps/pthread/: ... here.
* nptl/Makefile: Move corresponding references and rules to...
* sysdeps/pthread/Makefile: ... here.
* nptl/tst-cancel25.c: Move to...
* sysdeps/pthread/tst-cancel25.c: ... here.
(tf2) Do not test for SIGCANCEL when it is not defined.
* nptl/Makefile: Move corresponding reference to...
* sysdeps/pthread/Makefile: ... here.
They were to be moved to sysdeps/pthread/Makefile in 45fce058f ('htl:
Enable more cancellation tests')
* nptl/Makefile: (tests): Remove tst-cancelx9.
(CFLAGS-tst-cancelx9.c): Remove.
d6d74ec16 ('htl: Enable more tests') moved the linking rules from
nptl/Makefile and htl/Makefile to the shared sysdeps/pthread/Makefile. But
e.g. on powerpc some tests are added in sysdeps/powerpc/Makefile, which is
included *after* sysdeps/pthread/Makefile, and thus the tests don't get
affected by the rules and fail to link. For now let's just copy over the
set of rules in both nptl/Makefile and htl/Makefile.
* sysdeps/pthread/Makefile: Move libpthread linking rules to...
* htl/Makefile: ... here and...
* nptl/Makefile: ... there.
This introduces the function __pthread_attr_extension to allocate the
extension space, which is freed by pthread_attr_destroy.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
union pthread_attr_transparent has always the correct size, even if
pthread_attr_t has padding that is not present in struct pthread_attr.
This should not result in an observable behavioral change. The
existing code appears to have been correct, but it was brittle because
it was not clear which functions were allowed to write to an entire
pthread_attr_t argument (e.g., by copying it).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This allows to reuse the storage after calling pthread_cond_destroy.
* sysdeps/htl/bits/types/struct___pthread_cond.h (__pthread_cond):
Replace unused struct __pthread_condimpl *__impl field with unsigned int
__wrefs.
(__PTHREAD_COND_INITIALIZER): Update accordingly.
* sysdeps/htl/pt-cond-timedwait.c (__pthread_cond_timedwait_internal):
Register as waiter in __wrefs field. On unregistering, wake any pending
pthread_cond_destroy.
* sysdeps/htl/pt-cond-destroy.c (__pthread_cond_destroy): Register wake
request in __wrefs.
* nptl/Makefile (tests): Move tst-cond20 tst-cond21 to...
* sysdeps/pthread/Makefile (tests): ... here.
* nptl/tst-cond20.c nptl/tst-cond21.c: Move to...
* sysdeps/pthread/tst-cond20.c sysdeps/pthread/tst-cond21.c: ... here.
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Also add the private type union pthread_attr_transparent, to reduce
the amount of casting that is required.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
pthread_attr_destroy needs to be a weak alias to avoid future
linknamespace failures.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Use __getline instead of __getdelim to avoid a localplt failure.
Likewise for __getrlimit/getrlimit.
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_getattr_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py --only-linux pthread_getattr_np
The private export of __pthread_getaffinity_np is no longer needed, but
the hidden alias still necessary so that the symbol can be exported with
versioned_symbol.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_getaffinity_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py pthread_getaffinity_np
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
The symbol did not previously exist in libc, so a new GLIBC_2.32
symbol is needed, to get correct dependency for binaries which
use the symbol but no longer link against libpthread.
The abilist updates were performed by:
git ls-files 'sysdeps/unix/sysv/linux/**/libc.abilist' \
| while read x ; do
echo "GLIBC_2.32 pthread_attr_setaffinity_np F" >> $x
done
python3 scripts/move-symbol-to-libc.py pthread_attr_setaffinity_np
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The stubs for pthread_getaffinity_np, pthread_getname_np,
pthread_setaffinity_np, pthread_setname_np are replaced, and corresponding
tests are moved.
After the removal of the NaCl port, nptl is Linux-specific, and the stubs
are no longer needed. This effectively reverts commit
c76d1ff514 ("NPTL: Add stubs for Linux-only
extension functions.").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is a race between __nptl_setxid and exiting detached thread, which
causes a deadlock on stack_cache_lock. The deadlock happens in this
state:
T1: setgroups -> __nptl_setxid (holding stack_cache_lock, waiting on cmdp->cntr == 0)
T2 (detached, exiting): start_thread -> __deallocate_stack (waiting on stack_cache_lock)
more threads waiting on stack_cache_lock in pthread_create
For non-detached threads, start_thread waits for its own setxid handler to
finish before exiting. Do this for detached threads as well.
New threads inherit the signal mask from the current thread. This
means that signal handlers can run on the newly created thread
immediately after the kernel has created the userspace thread, even
before glibc has initialized the TCB. Consequently, new threads can
observe uninitialized ctype data, among other things.
To address this, block all signals before starting the thread, and
pass the original signal mask to the start routine wrapper. On the
new thread, first perform all thread initialization, and then unblock
signals.
The cost of doing this is two rt_sigprocmask system calls on the old
thread, and one rt_sigprocmask system call on the new thread. (If
there was a way to clone a new thread with a signals disabled, this
could be brought down to one system call each.) The thread descriptor
increases in size, too, and sigset_t is fairly large. This increase
could be brought down by reusing space the in the descriptor which is
not needed before running user code, or by switching to an internal
sigset_t definition which only covers the signals supported by the
kernel definition. (Part of the thread descriptor size increase is
already offset by reduced stack usage in the thread start wrapper
routine after this commit.)
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The upper bits of the sigset_t s not fully initialized in the signal
mask calls that return information from kernel (sigprocmask,
sigpending, and pthread_sigmask), since the exported sigset_t size
(1024 bits) is larger than Linux support one (64 or 128 bits).
It might make sigisemptyset/sigorset/sigandset fail if the mask
is filled prior the call.
This patch changes the internal signal function to handle up to
supported Linux signal number (_NSIG), the remaining bits are
untouched.
Checked on x86_64-linux-gnu and i686-linux-gnu.
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
A new symbol version is added on libc to force loading failure
instead of lazy binding one for newly binaries with old loaders.
Checked with a build against all affected ABIs.
Due to the built-in tables, __NR_set_robust_list is always defined
(although it may not be available at run time).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is necessary to export __pthread_cond_init from libc because
the C11 condition variable needs it and is still left in libpthread.
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is necessary to export __pthread_cond_destroy from libc because
the C11 condition variable needs it and is still left in libpthread.
This is part of the libpthread removal project:
<https://sourceware.org/ml/libc-alpha/2019-10/msg00080.html>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This will make it easier to review changes which move implementations
from libpthread to libc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The behavior of the signal mask on threads created by timer_create
for SIGEV_THREAD timers are implementation-defined and glibc explicit
unblocks all signals before calling the user-defined function.
This behavior, although not incorrect standard-wise, opens a race if a
program using a blocked rt-signal plus sigwaitinfo (and without an
installed signal handler for the rt-signal) receives a signal while
executing the used-defined function for SIGEV_THREAD.
A better alternative discussed in bug report is to rather block all
signals (besides the internal ones not available to application
usage).
This patch fixes this issue by only unblocking SIGSETXID (used on
set*uid function) and SIGCANCEL (used for thread cancellation).
Checked on x86_64-linux-gnu and i686-linux-gnu.
This supersedes the init_array sysdeps directory. It allows us to
check for ELF_INITFINI in both C and assembler code, and skip DT_INIT
and DT_FINI processing completely on newer architectures.
A new header file is needed because <dl-machine.h> is incompatible
with assembler code. <sysdep.h> is compatible with assembler code,
but it cannot be included in all assembler files because on some
architectures, it redefines register names, and some assembler files
conflict with that.
<elf-initfini.h> is replicated for legacy architectures which need
DT_INIT/DT_FINI support. New architectures follow the generic default
and disable it.
