This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active. Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset. The result is that it makes a syscall for
every offset request.
There is scope for optimizing this by caching offsets when we know
that the handler is active. A simple way to find out is when the
buffers have data. It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.
Two, however, have a single target combining mtrace with something
else. In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace. In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.
This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.
Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.
Tested x86_64.
* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
separate $(objpfx)tst-fopenloc-cmp.out and
$(objpfx)tst-fopenloc-mem.out targets.
(tests): Update dependencies.
* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
(tst-rxspencer-no-utf8-ARGS): New variable.
(tst-rxspencer-no-utf8-ENV): Likewise.
(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
instead of $(objpfx)tst-rxspencer-mem.
($(objpfx)tst-rxspencer-mem): Change target to
$(objpfx)tst-rxspencer-no-utf8-mem. Depend on
$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
* posix/tst-rxspencer-no-utf8.c: New file.
ftell tries to avoid flushing the buffer when it is in write mode by
converting the wide char data and placing it into the binary buffer.
If the output buffer space is full and there is data to write, the
code reverts to flushing the buffer. This breaks when there is space
in the buffer but it is not enough to convert the next character in
the wide data buffer, due to which __codecvt_do_out returns a
__codecvt_partial status. In this case, ftell keeps running in an
infinite loop.
The fix here is to detect the __codecvt_partial status in addition to
checking if the buffer is full. I have also added a test case that
demonstrates the infinite loop.
In BZ #12724, partial support for POSIX 2008 fclose behavior was added.
Since it isn't entirely conforming to the spec, some applications are
known to be breaking in this intermediate state. So revert the partial
support until we can get things fully implemented.
This reverts commit fcabc0f8b1.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[BZ #14543]
Set the internal buffer state correctly whenever the external buffer
state is modified by fseek by either computing the current
_IO_read_ptr/end for the internal buffer based on the new _IO_read_ptr
in the external buffer or converting the content read into the
external buffer, up to the extent of the requested fseek offset.
* libio/wfileops.c (_IO_wfile_underflow): Fix handling of
incomplete characters at end of input buffer.
* libio/Makefile (tests): Add tst-fgetwc.
* libio/tst-fgetwc.c: New file.
* libio/tst-fgetwc.input: New file.
2006-12-13 Ulrich Drepper <drepper@redhat.com>
[BZ #2337]
* libio/Makefile (tests): Add tst-setvbuf1.
* libio/tst-setvbuf1.c: New file.
2006-12-08 Jakub Jelinek <jakub@redhat.com>
[BZ #2337]
* libio/genops.c (__uflow): Fix a typo.
* libio/wfiledoalloc.c (_IO_wfile_doallocate): Don't stat
nor set _IO_LINE_BUF bit here. Size the wide buffer based on
the narrow buffer size.
2006-11-24 Jakub Jelinek <jakub@redhat.com>
[BZ #2337]
* libio/libio.h (_IO_FLAGS2_USER_WBUF): Define.
* libio/wgenops.c (_IO_wsetb, _IO_wdefault_finish): Test and set
_IO_FLAGS2_USER_WBUF bit in _flags2 instead of _IO_USER_BUF bit
in _flags.
* libio/wstrops.c (_IO_wstr_overflow, enlarge_userbuf,
_IO_wstr_finish): Likewise.
* libio/wmemstream.c (open_wmemstream): Likewise.
* libio/fileops.c (_IO_new_file_close_it): Call _IO_set[bgp]
even for wide streams.
2006-08-14 Ulrich Drepper <drepper@redhat.com>
[BZ #1996]
* libio/memstream.c (open_memstream): Allocate initial buffer with
calloc.
* libio/wmemstream.c (open_wmemstream): Likewise.
* libio/strops.c: Pretty printing.
(_IO_str_overflow): Clear uninitialized part of the new buffer.
(enlarge_userbuf): New function.
(_IO_str_seekoff): Call it if seek position is larger than current
buffer.
* libio/wstrops.c: Likewise.
* libio/vasprintf.c: Add comment as to why we do not have to use
calloc instead of malloc to allocate initial buffer.
* libio/Makefile (tests): Add bug-memstream1 and bug-wmemstream1.
* libio/bug-memstream1.c: New file.
* libio/bug-wmemstream1.c: New file.
2006-01-18 Ulrich Drepper <drepper@redhat.com>
[BZ #2173]
* libio/fileops.c (_IO_new_file_fopen): If ,ccs= is given, also
set vtable to the wide vtable.
* libio/tst-fopenloc2.c: New file.
* libio/Makefile (tests): Add tst-fopenloc2.
* sysdeps/unix/sysv/linux/shm_open.c [__ASSUME_TMPFS_NAME]
prototype.
(nexttowardf): Redirect to __nldbl_nexttowardf.
(nexttoward): Redirect to nextafter.
(__MATHDECL_2, __MATHDECL_1): Redirect *l functions to
non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and
__NO_LONG_DOUBLE_MATH.
* math/complex.h (__MATHDECL_1): Likewise.
* math/bits/mathcalls.h (nexttoward): Don't prototype if
__LDBL_COMPAT.
* misc/sys/cdefs.h: Include <bits/wordsize.h>.
(__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH,
__LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros.
* libio/bits/stdio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/stdio.h [__LDBL_COMPAT]: #include it.
* libio/bits/libio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/libio.h [__LDBL_COMPAT]: #include it.
* libio/libioP.h: Include <math_ldbl_opt.h>.
* include/wchar.h (__fwprintf, __vfwprintf): Fix commented out
attribute.
(__vfwprintf_chk): New prototype. Add libc_hidden_proto.
* wcsmbs/bits/wchar-ldbl.h: New file.
* wcsmbs/Makefile (headers): Add it.
* wcsmbs/wchar.h [__LDBL_COMPAT]: #include it.
* wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed.
(vswprintf): Define as a macro rather than inline function.
* stdio-common/bits/printf-ldbl.h: New file.
* stdio-common/Makefile (headers): Add it.
* stdio-common/printf.h [__LDBL_COMPAT]: #include it.
* libio/fwprintf.c: Include libioP.h.
(fwprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/fwscanf.c: Include libioP.h.
(fwscanf): Rename to __fwscanf and add ldbl_strong_alias.
* libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf,
add ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(vsprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias
instead of weak_alias.
* libio/iovswscanf.c (vswscanf): Rename to __vswscanf,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* libio/obprintf.c (obstack_printf, obstack_vprintf): Use
ldbl_weak_alias instead of weak_alias.
* libio/swprintf.c: Include libioP.h.
(swprintf): Rename to __swprintf and add ldbl_strong_alias.
* libio/swscanf.c: Include libioP.h.
(swscanf): Rename to __swscanf and add ldbl_strong_alias.
* libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias
instead of weak_alias.
* libio/vswprintf.c (__vswprintf): Remove alias.
(vswprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/vwprintf.c: Include libioP.h.
(vwprintf): Rename to __vwprintf and add ldbl_strong_alias.
* libio/vwscanf.c (vwscanf): Rename to __vwscanf and add
ldbl_strong_alias.
* libio/wprintf.c: Include libioP.h.
(wprintf): Rename to __wprintf and add ldbl_strong_alias.
* libio/wscanf.c: Include libioP.h.
(wscanf): Rename to __wscanf and add ldbl_strong_alias.
* stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add
ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(asprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/dprintf.c (dprintf): Rename to __dprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/fprintf.c: Include libioP.h.
(fprintf): Rename to __fprintf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(_IO_fprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/fscanf.c: Include libioP.h.
(fscanf): Rename to __fscanf and add ldbl_strong_alias.
* stdio-common/printf.c: Include libioP.h.
(printf): Rename to __printf and add ldbl_strong_alias.
(_IO_printf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/printf_size.c (printf_size): Rename to __printf_size
and add ldbl_strong_alias.
* stdio-common/scanf.c (scanf): Rename to __scanf and add
ldbl_strong_alias.
* stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of
weak_alias.
* stdio-common/sprintf.c (sprintf): Rename to __sprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
(_IO_sprintf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/sscanf.c: Include libioP.h instead of iolibio.h.
(sscanf): Rename to __sscanf and add ldbl_strong_alias.
* stdio-common/vfprintf.c (vfprintf): Define to
_IO_vfprintf_internal. Use ldbl_strong_alias instead. Use
ldbl_hidden_def instead of libc_hidden_def.
(_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl,
handle the argument as double if it is non-zero.
(vfwprintf): Use ldbl_weak_alias instead of weak_alias.
(_IO_vfprintf): Add ldbl_strong_alias.
* stdio-common/vfscanf.c (_IO_vfscanf): Rename to
_IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add
ldbl_strong_alias.
(vfwscanf): Use ldbl_weak_alias instead of weak_alias.
(__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(vfscanf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/vprintf.c: Include libioP.h.
(vprintf): Rename to __vprintf and add ldbl_strong_alias.
* debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk
and add ldbl_strong_alias.
* debug/printf_chk.c (__printf_chk): Rename to ___printf_chk
and add ldbl_strong_alias.
* debug/snprintf_chk.c: Include libioP.h.
(__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias.
* debug/sprintf_chk.c: Include libioP.h.
(__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias.
* debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def.
* debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk
and add ldbl_strong_alias.
* debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT].
* wcsmbs/wchar.h (wcstold): Likewise.
* stdlib/strtod_l.c: Include math_ldbl_opt.h.
(____STRTOF_INTERNAL): Define.
(INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL.
(__STRTOF): Call ____STRTOF_INTERNAL instead.
[LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l):
Add compatibility symbols.
* stdlib/strtod.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal,
__wcstold_internal): Add compatibility symbols.
* stdlib/strtold.c: Include bits/wordsize.h, wchar.h.
(NEW, NEW1): Define.
(__new_strtold, __new_wcstold): New prototypes.
(____new_strtold_internal, ____new_wcstold_internal): Likewise.
Add libc_hidden_proto.
(STRTOF): Define to NEW (*told).
[__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add
long_double_symbol.
[__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal,
__strtold_internal): Likewise. Add libc_hidden_ver.
* stdlib/bits/stdlib-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/stdlib.h [__LDBL_COMPAT]: #include it.
* include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove
libc_hidden_proto.
(__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt,
__qgcvt, __qecvt_r, __qfcvt_r): New prototypes.
* misc/efgcvt_r.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(*fcvt_r): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(*ecvt_r): Likewise.
(cvt_symbol): Define. Use it on fcvt_r and ecvt_r.
* misc/efgcvt.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(fcvt): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(ecvt, gcvt): Likewise.
(cvt_symbol): Define. Use it on fcvt, ecvt and gcvt.
* stdlib/bits/monetary-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/monetary.h [__LDBL_COMPAT]: #include it.
* stdlib/strfmon.c: Include math_ldbl_opt.h.
(strfmon): Rename to __strfmon and add ldbl_strong_alias.
* stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO].
(__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl.
(__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias.
(strfmon_l): Use ldbl_weak_alias instead of weak_alias.
* misc/bits/syslog-ldbl.h: New file.
* misc/Makefile (headers): Add it.
* misc/sys/syslog.h [__LDBL_COMPAT]: #include it.
* misc/syslog.c: Include math_ldbl_opt.h.
(syslog): Rename to __syslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
(vsyslog): Rename to __vsyslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
* sysdeps/generic/math_ldbl_opt.h: New file.
* math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants.
Add weak_alias.
* math/w_j0l.c (j0l, y0l): Likewise.
* math/w_jnl.c (jnl, ynl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c
(__nexttowardl): Remove strong_alias.
(nexttowardl): Remove weak_alias.
* sysdeps/ieee754/ldbl-96/s_erfl.c
(__erfl, __erfcl): Remove strong_alias.
(erfl, erfcl): Remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-64-128/w_expl.c: New file.
* sysdeps/ieee754/ldbl-opt/configure.in: New file.
* sysdeps/ieee754/ldbl-opt/configure: New file.
* sysdeps/ieee754/ldbl-opt/Makefile: New file.
* sysdeps/ieee754/ldbl-opt/Versions: New file.
* sysdeps/ieee754/ldbl-opt/cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/cabsl.c: New file.
* sysdeps/ieee754/ldbl-opt/carg.c: New file.
* sysdeps/ieee754/ldbl-opt/cargl.c: New file.
* sysdeps/ieee754/ldbl-opt/cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/cimagl.c: New file.
* sysdeps/ieee754/ldbl-opt/conj.c: New file.
* sysdeps/ieee754/ldbl-opt/conjl.c: New file.
* sysdeps/ieee754/ldbl-opt/creal.c: New file.
* sysdeps/ieee754/ldbl-opt/creall.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_atan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clogl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_erf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file.
* sysdeps/ieee754/ldbl-opt/s_finite.c: New file.
* sysdeps/ieee754/ldbl-opt/s_floor.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fma.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmal.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fminl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/s_logb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_modf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/s_remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/s_rint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_round.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significand.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significandl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acos.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asin.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asinl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_coshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_drem.c: New file.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jn.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jnl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_logl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_pow.c: New file.
* sysdeps/ieee754/ldbl-opt/w_powl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file.
* sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32
after dbl-64.
* sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION):
%define this to to GLIBC_2.4.
* sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/Versions: New file.
* sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp,
__unordered_v9cmp): Define differently depending on
-m32 -mlong-double-{64,128}.
(__signbitl, sqrtl, __ieee754_sqrtl): New inlines.
* sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines):
Set.
(sysdep-routines): Add sparc32-quad-routines.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h.
(FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal
function.
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New
alias to _Q_sqrt.
* sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW.
(_IO_vfwscanf, _IO_vfwprintf): Likewise.
* libio/libioP.h (_IO_vdprintf): Likewise.
2004-11-04 Jakub Jelinek <jakub@redhat.com>
* libio/fileops.c (_IO_new_file_seekoff): If mode is 0 and
fp->_offset == _IO_pos_BAD, just call _IO_SYSSEEK (fp, 0, dir)
and if successful set fp->_offset.
* libio/Makefile (tests): Add bug-ungetc3.
* libio/bug-ungetc3.c: New test.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Fill in c_ispeed
and c_ospeed fields.
* sysdeps/unix/sysv/linux/speed.c (cfsetospeed): Set c_ospeed field.
(cfsetispeed): Set c_ispeed field.
* sysdeps/unix/sysv/linux/tcsetattr.c (IBAUD0): Define unconditionally
to match corresponding speed.c code.
2003-09-06 Ulrich Drepper <drepper@redhat.com>
* libio/wfileops.c (_IO_wfile_underflow): Mark beginning of the
narrow character buffer.
* libio/Makefile: Add rules to build and run bug-ftell.
* libio/bug-ftell.c: New file.
* stdio-common/vfprintf.c: Don't use the first grouping number twice.
* stdio-common/vfscanf.c (vfscanf): Fix recognition of characters
matching the decimal point and possibly leading the thousands
separator. This caused the recognition of thousands separators to
always fail.
2003-09-05 Ulrich Drepper <drepper@redhat.com>
* libio/fileops.c (_IO_new_file_overflow): Handle switching to
write mode from read in backup buffer.
* libio/Makefile (tests): Add bug-ungetc2.
* libio/bug-ungetc2.c: New file.
2003-09-05 Roland McGrath <roland@redhat.com>
>>>>>>> 1.7905
* sysdeps/unix/sysv/linux/linux_fsinfo.h: Define VXFS_SUPER_MAGIC.
2002-08-26 Ulrich Drepper <drepper@redhat.com>
* libio/Makefile (tests): Add bug-fopena+.
* libio/bug-fopena+.c: New file.
* stdio-common/tst-swprintf.c (main): Add casts to avoid warnings.
* locale/xlocale.c: Fix the last change. The variable still has
to end in _data.
* sysdeps/generic/bits/libc-tsd.h [!(USE_TLS && HAVE___THREAD)]
(__libc_tsd_set): Add _data prefix to variable name.
2002-08-26 Ulrich Drepper <drepper@redhat.com>
* libio/wfileops.c (_IO_wfile_seekoff): Set fp->_offset after
finding the read position [PR libc/4265].
* libio/Makefile (tests): Add bug-rewind2.
* libio/bug-rewind2.c: New file.
if seek would go past it.
(mmap_remap_check): If file position is at or past EOF after check,
leave read pointers at EOF and don't seek.
* libio/tst-mmap-offend.c: New file.
* libio/Makefile (tests): Add it.
(_IO_file_jumps_mmap): Use it.
(_IO_file_underflow_mmap): Rewritten. If after EOF or fflush,
repeat the stat check and resize the mapped buffer as necessary.
2002-07-31 Roland McGrath <roland@frob.com>
* libio/fileops.c (decide_maybe_mmap): New static function.
Code taken from libio/iofopen.c:__fopen_maybe_mmap to try to
mmap the file contents. Then switch the jump tables to the mmap
tables if it worked, or the vanilla file tables if not.
(_IO_file_underflow_maybe_mmap): New function.
(_IO_file_seekoff_maybe_mmap): New function.
(_IO_file_xsgetn_maybe_mmap): New function.
(_IO_file_jumps_maybe_mmap): New variable, jump table using those.
* libio/libioP.h: Declare those.
* libio/wfileops.c (_IO_wfile_underflow_maybe_mmap): New function.
(_IO_wfile_jumps_maybe_mmap): New variable, jump table using that.
* libio/iofopen.c (__fopen_maybe_mmap): Don't try to mmap here.
If the stream is read-only, set its jump tables to those new ones.
* libio/iofdopen.c (_IO_new_fdopen) [_G_HAVE_MMAP]: Set the initial
jump tables to the maybe_mmap ones, and don't call __fopen_maybe_mmap.
We need the tables set before _IO_file_attach.
* libio/tst-mmap-eofsync.c: New file.
* libio/tst-mmap-fflushsync.c: New file.
* libio/bug-mmap-fflush.c: New file.
* libio/tst-mmap2-eofsync.c: New file.
* libio/Makefile (tests): Add them.
* libio/wfileops.c (_IO_wfile_underflow_mmap): Don't set EOF bit when
_IO_file_underflow_mmap fails, it already set the appropriate bit.
* libio/stdio.h (sys_errlist, sys_nerr, _sys_errlist, _sys_nerr):
Declarations moved to <bits/sys_errlist.h>. Include that file.
* libio/Makefile (headers): Add bits/sys_errlist.h to the list.
* sysdeps/generic/bits/sys_errlist.h: New file. This does *not*
declare sys_errlist and sys_nerr.
* sysdeps/unix/sysv/linux/bits/sys_errlist.h: New file. Does
provide declarations.
2002-07-24 Ulrich Drepper <drepper@redhat.com>
* locale/hashval.h: Make more self-containedby defining LONG_BITS.
* locale/programs/simple-hash.c: Remove LONG_BITS definition.
* locale/programs/locarchive.c (add_locale_to_archive): Correct
test to detect duplicate locales.
* libio/fileops.c (_IO_new_file_seekoff): Fail if relative
position would be before beginning of file.
(_IO_file_seekoff_mmap): Likewise.
* libio/Makefile (tests): Add bug-fseek.
* libio/bug-fseek.c: New file.
* intl/explodename.c: Remove support for CEN-style locale variables.
It was never used and shouldn't be since it's not portable.
* intl/finddomain.c: Likewise.
* intl/l10nflist.c: Likewise.
* intl/loadinfo.h: Likewise.
* locale/findlocale.c: Likewise.
* libio/fileops.c (_IO_file_xsgetn_mmap): Always set EOF flag is
not enough content is available.
* libio/tst-eof.c: New file.
* libio/Makefile (tests): Add tst-eof.
* libio/fileops.c (_IO_file_underflow_mmap): Read a single byte to
update atime.
* libio/tst-atime.c: New file.
* libio/Makefile (tests): Add tst-atime.
