This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current tests don't test the functionality of realloc in detail.
Add a new test for realloc that exercises some of the corner cases
that are not otherwise tested.
ChangeLog:
2013-09-09 Will Newton <will.newton@linaro.org>
* malloc/Makefile: Add tst-realloc to tests.
* malloc/tst-realloc.c: New file.
[BZ #1349]
malloc_usable_size returns the usable size in an allocated chunk,
which may be >= the requested size. In the case of MALLOC_CHECK_ being
exported to > 0 however, only the requested size is usable, since a
magic value is written at the end of the request size to trap writes
beyond request bounds. Hence, when MALLOC_CHECK_ is exported to > 0,
malloc_usable_size() should return the request size.
obstack calls several callbacks, so on i?86 it'd better be compiled
without -mpreferred-stack-boundary=2, otherwise the callbacks are called
with misaligned stack.
(public_sET_STATe): If ms->version < 3, put all chunks into
unsorted chunks and clear {fd,bk}_nextsize fields of largebin
chunks.
* malloc/malloc.c [MALLOC_DEBUG]: Revert 2007-05-13 changes.
* malloc/hooks.c: Likewise.
* malloc/arena.c: Likewise.
* malloc/malloc.c (do_check_malloc_state): Don't assert
n_mmaps is not greater than n_mmaps_max. This removes the need
for the previous change.
* malloc/Makefile (CFLAGS-malloc.c): Revert accidental
2007-05-07 commit.
(new_heap): Initialize mprotect_size.
(grow_heap): When growing, only mprotect from mprotect_size till
new_size if mprotect_size is smaller. When shrinking, use PROT_NONE
MMAP for __libc_enable_secure only, otherwise use MADV_DONTNEED.
2007-05-07 Ulrich Drepper <drepper@redhat.com>
Jakub Jelinek <jakub@redhat.com>
* malloc/arena.c (heap_info): Add mprotect_size field, adjust pad.
(new_heap): Initialize mprotect_size.
(grow_heap): When growing, only mprotect from mprotect_size till
new_size if mprotect_size is smaller. When shrinking, use PROT_NONE
MMAP for __libc_enable_secure only, otherwise use MADV_DONTNEED.
* malloc/arena.c (ptmalloc_lock_all): If global lock already taken
by the same thread, just bump the counter.
(ptmalloc_unlock_all): If counter for recursive locks hasn't reached
zero, don't do anything else.
* malloc/Makefile (tests): Add tst-mallocfork.
* malloc/tst-mallocfork.c: New file.
2005-08-17 Robert Love <rml@novell.com>
* sysdeps/unix/sysv/linux/sys/inotify.h: Add IN_MOVE_SELF event.
2005-08-19 Bruno Haible <bruno@clisp.org>
* intl/localealias.c (read_alias_file): In case of failure, close the
file descriptor and sort the array before returning.
2005-08-19 Ulrich Drepper <drepper@redhat.com>
* malloc/Makefile: Link libmemusage.so with ld.so.
* malloc/memusage.c: Use atomic operations for all counter and size
computations. Handle thread stacks.
* sysdeps/generic/memusage.h: Define memusage_cntr_t and
memusage_size_t.
* sysdeps/i386/i686/memusage.h: New file.
* include/atomic.h: Define atomic_max and atomic_min.
* debug/tst-chk1.c: Add tests for mbstowcs and wcstombs.
(_dl_close): If called recursively, just remember GC needs to be rerun
and decrease l_direct_opencount. Avoid GC if l_direct_opencount
decreased to 1. Rerun GC at the end if any destructor unloaded some
additional libraries.
* elf/Makefile: Add rules to build and run unload6 test.
* elf/unload6.c: New test.
* elf/unload6mod1.c: New file.
* elf/unload6mod2.c: New file.
* elf/unload6mod3.c: New file.
* malloc/hooks.c (mem2chunk_check): Add magic_p argument, set *magic_p
if magic_p is not NULL.
(top_check): Invoke MALLOC_FAILURE_ACTION if MORECORE failed.
(malloc_check): Fail if sz == -1.
(free_check): Adjust mem2chunk_check caller.
(realloc_check): Likewise. Fail if bytes == -1. If bytes == 0 and
oldmem != NULL, call free_check and return NULL. If reallocating
and returning NULL, invert magic byte again to make oldmem valid
region for further checking.
(memalign_check): Fail if bytes == -1.
* malloc/Makefile: Add rules to build and run tst-mcheck.
* malloc/tst-mcheck.c: New test.
2003-09-27 Wolfram Gloger <wg@malloc.de>
* malloc/malloc.c: Include <malloc-machine.h> earlier instead of
"thread-m.h", so that default parameters can be overridden in a
system-specific malloc-machine.h. Remove extra ; from extern "C"
closing brace.
* sysdeps/generic/malloc-machine.h: New file.
* sysdeps/mach/hurd/malloc-machine.h: New file.
* malloc/thread-m.h: Removed.
* malloc/Makefile: Remove CFLAGS-malloc.c parameter addition, it
is in sysdeps/generic/malloc-machine.h now.
* elf/dl-reloc.c (_dl_allocate_static_tls): Move definition of
variables only used if TLS_TCB_AT_TP is defined into the #if
branch.
* sysdeps/unix/sysv/linux/Makefile: Remove db2 directory handling.
* malloc/Makefile (CFLAGS-malloc.c): Define DEFAULT_TOP_PAD to 128k.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-malloc.c): Add to, not
replace.
* malloc/thread-freeres.c: New file.
* malloc/Makefile (aux): Add it.
* sunrpc/Versions (GLIBC_PRIVATE): Removed.
* sunrpc/rpc_thread.c (__rpc_thread_destroy): Put in special section
"__libc_thread_freeres_fn" and add to __libc_thread_subfreeres set.
* sysdeps/unix/sysv/linux/i386/geteuid.c (__geteuid): Typo fix.
* sysdeps/unix/sysv/linux/i386/getgid.c (__getgid): Typo fix.
2003-02-21 Roland McGrath <roland@frob.com>
* sysdeps/mach/hurd/opendir.c (__opendir): Use O_NONBLOCK in open.
* iconvdata/Makefile (tests): Add bug-iconv3 only if
[$(have-thread-library) = yes].
file-specific variable override so it compiles properly when using
--with-headers.
* NEWS: Added item for powerpc64-linux port.
* include/libc-symbols.h [HAVE_ASM_GLOBAL_DOT_NAME]
(C_SYMBOL_DOT_NAME): Insure that C_SYMBOL_DOT_NAME works for
various gcc versions. Dot names required for powerpc64.
[HAVE_ASM_GLOBAL_DOT_NAME] (_weak_extern): Add .weakext '.'ed symbol.
[HAVE_ASM_GLOBAL_DOT_NAME] (strong_alias): Add .global
C_SYMBOL_DOT_NAME(alias).
[HAVE_ASM_GLOBAL_DOT_NAME] (strong_data_alias): New macro. Same as
original strong_alias macro.
[HAVE_ASM_GLOBAL_DOT_NAME] (weak_alias): Add .weakext/.weak
C_SYMBOL_DOT_NAME(alias).
[HAVE_ASM_GLOBAL_DOT_NAME] (_symbol_version): Add .symver '.'ed name.
[HAVE_ASM_GLOBAL_DOT_NAME] (_default_symbol_version): Add .symver
'.'ed name.
Add comments on libc_hidden_data_def and libc_hidden_data_weak usage.
[HAVE_ASM_GLOBAL_DOT_NAME] (hidden_dot_def1): New macro. Generate
.global C_SYMBOL_DOT_NAME(alias). Otherwise an empty macro.
(hidden_def): Append hidden_dot_def1 macro to definition.
(hidden_ver): Append hidden_dot_def1 macro to definition.
(hidden_data_def): New macro. Same as original hidden_def macro.
(hidden_data_ver): New macro. Same as original hidden_ver macro.
[HAVE_ASM_GLOBAL_DOT_NAME] (hidden_dot_weak1): New macro. Generate
.weakext C_SYMBOL_DOT_NAME(alias). Otherwise an empty macro.
(hidden_weak): Append hidden_dot_weak1 macro to definition.
(hidden_data_weak): New macro. Same as original hidden_weak macro.
[HAVE_ASM_GLOBAL_DOT_NAME] (HIDDEN_JUMPTARGET): Define as .__GI_name.
Otherwise defined as __GI_name.
(libc_hidden_data_def): New macro. Use hidden_data_def.
(libc_hidden_data_weak): New macro. Use hidden_data_weak.
(libc_hidden_data_ver): New macro. Use hidden_data_ver.
(rtld_hidden_data_def): New macro. Use hidden_data_def.
(rtld_hidden_data_weak): New macro. Use hidden_data_weak.
(rtld_hidden_data_ver): New macro. Use hidden_data_ver.
(libm_hidden_data_def): New macro. Use hidden_data_def.
(libm_hidden_data_weak): New macro. Use hidden_data_weak.
(libm_hidden_data_ver): New macro. Use hidden_data_ver.
* inet/in6_addr.c: Replace libc_hidden_def with libc_hidden_data_def.
2002-01-18 Wolfram Gloger <wg@malloc.de>
* malloc/malloc.c: Rewrite, adapted from Doug Lea's malloc-2.7.0.c.
* malloc/malloc.h: Likewise.
* malloc/arena.c: New file.
* malloc/hooks.c: New file.
* malloc/tst-mallocstate.c: New file.
* malloc/Makefile: Add new testcase tst-mallocstate.
Add arena.c and hooks.c to distribute. Fix commented CPPFLAGS.
2002-01-28 Ulrich Drepper <drepper@redhat.com>
* stdlib/msort.c: Remove last patch. The optimization violates the
same rule which qsort.c had problems with.
2002-01-27 Paul Eggert <eggert@twinsun.com>
* stdlib/qsort.c (_quicksort): Do not apply the comparison function
to a pivot element that lies outside the array to be sorted, as
ISO C99 requires that the comparison function be called only with
addresses of array elements [PR libc/2880].
2001-08-29 Ulrich Drepper <drepper@redhat.com>
* nis/nis_findserv.c (__nis_findfastest): Don't fail if reply received
first is from a previous call.
Patch by Alexander Belopolsky <alexb@rentec.com> for [PR libc/3670].
2001-08-29 Andreas Schwab <schwab@suse.de>
* sysdeps/ia64/fpu/libm-test-ulps: Updated.
2001-08-25 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
* config.make.in (INSTALL_SCRIPT): Define.
* Makeconfig (INSTALL_SCRIPT): Define.
* Makerules (do-install-script): New macro to install scripts using
INSTALL_SCRIPT.
(install-bin-script): New rule to install scripts with
do-install-script.
(install-bin-script-nosubdir): New rule.
(install-no-libc.a-nosubdir): Add install-bin-script-nosubdir.
(distinfo-vars): Add $(install-bin-script).
* Rules (others): Likewise.
* Makefile (glibcbug): Install with install-bin-script.
* debug/Makefile (xtrace): Likewise.
(catchsegv): Likewise.
* elf/Makefile (ldd): Likewise.
* malloc/Makefile (mtrace): Likewise.
* timezone/Makefile (tzselect): Likewise.
2001-08-29 H.J. Lu <hjl@gnu.org>
* sysdeps/mips/dl-machine.h (__dl_runtime_resolve): Pass
ELF_RTYPE_CLASS_PLT, instead of R_MIPS_REL32, to
_dl_lookup_versioned_symbol () and _dl_lookup_symbol ().
Add it to LDFLAGS.so, LDFLAGS-rtld, and +link.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/unix/sysv/linux/cris/Dist: New file.
* sysdeps/unix/sysv/linux/cris/Makefile: New file.
* sysdeps/unix/sysv/linux/cris/_G_config.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/fcntl.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/mman.h: New file.
* sysdeps/unix/sysv/linux/cris/bits/resource.h: New file.
* sysdeps/unix/sysv/linux/cris/brk.c: New file.
* sysdeps/unix/sysv/linux/cris/chown.c: New file.
* sysdeps/unix/sysv/linux/cris/clone.S: New file.
* sysdeps/unix/sysv/linux/cris/fchown.c: New file.
* sysdeps/unix/sysv/linux/cris/fcntl.c: New file.
* sysdeps/unix/sysv/linux/cris/fxstat.c: New file.
* sysdeps/unix/sysv/linux/cris/getegid.c: New file.
* sysdeps/unix/sysv/linux/cris/geteuid.c: New file.
* sysdeps/unix/sysv/linux/cris/getgid.c: New file.
* sysdeps/unix/sysv/linux/cris/getgroups.c: New file.
* sysdeps/unix/sysv/linux/cris/getresgid.c: New file.
* sysdeps/unix/sysv/linux/cris/getresuid.c: New file.
* sysdeps/unix/sysv/linux/cris/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/cris/getrlimit64.c: New file.
* sysdeps/unix/sysv/linux/cris/getuid.c: New file.
* sysdeps/unix/sysv/linux/cris/lchown.c: New file.
* sysdeps/unix/sysv/linux/cris/lockf64.c: New file.
* sysdeps/unix/sysv/linux/cris/lxstat.c: New file.
* sysdeps/unix/sysv/linux/cris/mmap.S: New file.
* sysdeps/unix/sysv/linux/cris/mmap64.S: New file.
* sysdeps/unix/sysv/linux/cris/msgctl.c: New file.
* sysdeps/unix/sysv/linux/cris/profil-counter.h: New file.
* sysdeps/unix/sysv/linux/cris/register-dump.h: New file.
* sysdeps/unix/sysv/linux/cris/semctl.c: New file.
* sysdeps/unix/sysv/linux/cris/setegid.c: New file.
* sysdeps/unix/sysv/linux/cris/seteuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setgroups.c: New file.
* sysdeps/unix/sysv/linux/cris/setregid.c: New file.
* sysdeps/unix/sysv/linux/cris/setresgid.c: New file.
* sysdeps/unix/sysv/linux/cris/setresuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setreuid.c: New file.
* sysdeps/unix/sysv/linux/cris/setrlimit.c: New file.
* sysdeps/unix/sysv/linux/cris/setuid.c: New file.
* sysdeps/unix/sysv/linux/cris/shmctl.c: New file.
* sysdeps/unix/sysv/linux/cris/socket.S: New file.
* sysdeps/unix/sysv/linux/cris/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/cris/syscall.S: New file.
* sysdeps/unix/sysv/linux/cris/sysdep.S: New file.
* sysdeps/unix/sysv/linux/cris/sysdep.h: New file.
* sysdeps/unix/sysv/linux/cris/vfork.S: New file.
* sysdeps/unix/sysv/linux/cris/xstat.c: New file.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/cris/Dist: New file.
* sysdeps/cris/Implies: New file.
* sysdeps/cris/Makefile: New file.
* sysdeps/cris/__longjmp.S: New file.
* sysdeps/cris/_mcount.S: New file.
* sysdeps/cris/bits/endian.h: New file.
* sysdeps/cris/bits/setjmp.h: New file.
* sysdeps/cris/bits/string.h: New file.
* sysdeps/cris/dl-machine.h: New file.
* sysdeps/cris/elf/start.S: New file.
* sysdeps/cris/machine-gmon.h: New file.
* sysdeps/cris/memcopy.h: New file.
* sysdeps/cris/memusage.h: New file.
* sysdeps/cris/setjmp.S: New file.
* sysdeps/cris/sysdep.h: New file.
* sysdeps/cris/wordcopy.c: New file.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* elf/elf.h: Add new relocations for CRIS.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* shlib-versions: Add cases for Linux on CRIS.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* configure.in (ASM_LINE_SEP tests): Handle CRIS assembly, with
';' for comments and '@' for line separator.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* sysdeps/unix/sysv/linux/hppa/sysdep.h (INLINE_SYSCALL): Fix
typo; s/==/=/ for assignment.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* malloc/Makefile: Correct comment; mtrace is Perl, not AWK.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* iconv/gconv_simple.c (internal_ucs4_loop_unaligned): Check for
empty input before checking full output.
2001-04-08 Hans-Peter Nilsson <hp@axis.com>
* iconv/gconv.c (__gconv): Don't derefer parameter cd before
checking if == -1L.
2001-04-08 Ulrich Drepper <drepper@redhat.com>
* inet/rexec.c (rexec_af): Avoid calling perror with errno being set.
