Reflow and sort Makefile.
No code generation changes in non-test binary artifacts.
No regressions on x86_64 and i686.
Tested with build-many-glibcs.py for x86_64-gnu.
When using jemalloc, malloc() needs to use TSD, while libpthread
initialization needs malloc(). Having ___pthread_self set early to some
static storage allows TSD to work early, thus allowing jemalloc and
libpthread to initialize together.
This incidentaly simplifies __pthread_enable/disable_asynccancel and
__pthread_self, now that ___pthread_self is always initialized.
sysdeps/mach/hurd/htl/pt-pthread_self.c: New file.
htl/Makefile: .. Add it to libc routine.
sysdeps/mach/hurd/htl/pt-sysdep.c(__pthread_self): Remove it.
sysdeps/mach/hurd/htl/pt-sysdep.h(__pthread_self): Add hidden propertie.
htl/Versions(__pthread_self) Version it as private symbol.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-3-gfleury@disroot.org>
htl/pt-nthreads.c: new file.
htl/Makefile: Add it to routine.
htl/Versions: version it as private libc symbol.
htl/pt-create.c: remove his definition here.
htl/pt-internal.h: add propertie to it declaration.
Signed-off-by: Guy-Fleury Iteriteka <gfleury@disroot.org>
Message-Id: <20230318095826.1125734-2-gfleury@disroot.org>
When casting between a pointer and an integer of a different size, GCC
emits a warning (which is escalated to a build failure by -Werror).
Indeed, if what you start with is a pointer, which you then cast to a
shorter integer and then back again, you're going to cut off some bits
of the pointer.
But if you start with an integer (such as mach_port_t), then cast it to
a longer pointer (void *), and then back to a shorter integer, you are
fine. To keep GCC happy, cast through an intermediary uintptr_t, which
is always the same size as a pointer.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-4-bugaevc@gmail.com>
Replace atomic_decrement_and_test with atomic_fetch_add_relaxed.
These are simple counters which do not protect any shared data from
concurrent accesses. Also remove the unused file cond-perf.c.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When applications redirect some functions they might get called before
libpthread is fully initialized. They may still expected pthread_self
and cancellable functions to work, so cope with such calls in that
situation.
If any RPC fails, the reply port will already be deallocated.
__pthread_thread_terminate thus has to defer taking its name until the very last
__thread_terminate_release which doesn't reply a message. But then we
have to read from the pthread structure.
This introduces __pthread_dealloc_finish() which does the recording of
the thread termination, so the slot can be reused really only just before
the __thread_terminate_release call. Only the real thread can set it, so
let's decouple this from the pthread_state by just removing the
PTHREAD_TERMINATED state and add a terminated field.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
d482ebfa67 ('htl: Keep thread signals blocked during its initialization')
fixed not letting signals get delivered too early during thread creation,
but it also affected the main thread, thus making it block signals by
default. We need to just let the main thread sigset as it is.
The next commit is going to introduce a new implementation of
THREAD_GSCOPE_WAIT which needs to access the list of threads.
Since it must be usable from the dynamic laoder, we have to move
the symbols for the list of threads into the loader.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-2-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The pthread_atfork is similar between Linux and Hurd, only the compat
version bits differs. The generic version is place at sysdeps/pthread
with a common name.
It also fixes an issue with Hurd license, where the static-only object
did not use LGPL + exception.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
UNREGISTER_ATFORK is now defined for all ports in register-atfork.h, so most
previous includes of fork.h actually only need register-atfork.h now, and
cxa_finalize.c does not need an ifdef UNREGISTER_ATFORK any more.
The nptl-specific fork generation counters can then go to pthreadP.h, and
fork.h be removed.
Checked on x86_64-linux-gnu and i686-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Both htl and nptl uses a different data structure to implement atfork
handlers. The nptl one was refactored by 27761a1042 to use a dynarray
which simplifies the code.
This patch moves the nptl one to be the generic implementation and
replace Hurd linked one. Different than previous NPTL, Hurd also uses
a global lock, so performance should be similar.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
The internal semaphore list code is moved to a specific file,
sem_routine.c, and the internal usage is simplified to only two
functions (one to insert a new semaphore and one to remove it
from the internal list). There is no need to expose the
internal locking, neither how the semaphore mapping is implemented.
No functional or semantic change is expected, tested on
x86_64-linux-gnu.
Previously, glibc would pick an arbitrary tmpfs file system from
/proc/mounts if /dev/shm was not available. This could lead to
an unsuitable file system being picked for the backing storage for
shm_open, sem_open, and related functions.
This patch introduces a new function, __shm_get_name, which builds
the file name under the appropriate (now hard-coded) directory. It is
called from the various shm_* and sem_* function. Unlike the
SHM_GET_NAME macro it replaces, the callers handle the return values
and errno updates. shm-directory.c is moved directly into the posix
subdirectory because it can be implemented directly using POSIX
functionality. It resides in libc because it is needed by both
librt and nptl/htl.
In the sem_open implementation, tmpfname is initialized directly
from a string constant. This happens to remove one alloca call.
Checked on x86_64-linux-gnu.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
