This introduces the function __pthread_attr_extension to allocate the
extension space, which is freed by pthread_attr_destroy.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
union pthread_attr_transparent has always the correct size, even if
pthread_attr_t has padding that is not present in struct pthread_attr.
This should not result in an observable behavioral change. The
existing code appears to have been correct, but it was brittle because
it was not clear which functions were allowed to write to an entire
pthread_attr_t argument (e.g., by copying it).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is a race between __nptl_setxid and exiting detached thread, which
causes a deadlock on stack_cache_lock. The deadlock happens in this
state:
T1: setgroups -> __nptl_setxid (holding stack_cache_lock, waiting on cmdp->cntr == 0)
T2 (detached, exiting): start_thread -> __deallocate_stack (waiting on stack_cache_lock)
more threads waiting on stack_cache_lock in pthread_create
For non-detached threads, start_thread waits for its own setxid handler to
finish before exiting. Do this for detached threads as well.
New threads inherit the signal mask from the current thread. This
means that signal handlers can run on the newly created thread
immediately after the kernel has created the userspace thread, even
before glibc has initialized the TCB. Consequently, new threads can
observe uninitialized ctype data, among other things.
To address this, block all signals before starting the thread, and
pass the original signal mask to the start routine wrapper. On the
new thread, first perform all thread initialization, and then unblock
signals.
The cost of doing this is two rt_sigprocmask system calls on the old
thread, and one rt_sigprocmask system call on the new thread. (If
there was a way to clone a new thread with a signals disabled, this
could be brought down to one system call each.) The thread descriptor
increases in size, too, and sigset_t is fairly large. This increase
could be brought down by reusing space the in the descriptor which is
not needed before running user code, or by switching to an internal
sigset_t definition which only covers the signals supported by the
kernel definition. (Part of the thread descriptor size increase is
already offset by reduced stack usage in the thread start wrapper
routine after this commit.)
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Due to the built-in tables, __NR_set_robust_list is always defined
(although it may not be available at run time).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
With all Linux ABIs using the expected Linux kABI to indicate
syscalls errors, the INTERNAL_SYSCALL_DECL is an empty declaration
on all ports.
This patch removes the 'err' argument on INTERNAL_SYSCALL* macro
and remove the INTERNAL_SYSCALL_DECL usage.
Checked with a build against all affected ABIs.
All nptl targets have these signal definitions nowadays. This
changes also replaces the nptl-generic version of pthread_sigmask
with the Linux version.
Tested on x86_64-linux-gnu and i686-linux-gnu. Built with
build-many-glibcs.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation. For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.
As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.
This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).
If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.
* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
pthread_clock_settime.
* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
* elf/rtld.c (_dl_start_final): Likewise.
* nptl/allocatestack.c (__find_thread_by_id): Remove function.
* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
Remove.
* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
(_dl_cpuclock_offset): Remove.
* nptl/descr.h (struct pthread): Rename cpuclock_offset to
cpuclock_offset_ununsed.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
cpuclock_offset set.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* nptl/pthread_clock_gettime.c: Remove file.
* nptl/pthread_clock_settime.c: Likewise.
* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
and CLOCK_PROCESS_CPUTIME_ID support.
* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
[HP_TIMING_AVAIL] (__clock_getres): Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
Likewise.
(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.
[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
This patch adds the thrd_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically thrd_create, thrd_curent, rhd_detach, thrd_equal,
thrd_exit, thrd_join, thrd_sleep, thrd_yield, and required types.
Mostly of the definitions are composed based on POSIX conterparts, such as
thrd_t (using pthread_t). For thrd_* function internally direct
POSIX pthread call are used with the exceptions:
1. thrd_start uses pthread_create internal implementation, but changes
how to actually calls the start routine. This is due the difference
in signature between POSIX and C11, where former return a 'void *'
and latter 'int'.
To avoid calling convention issues due 'void *' to int cast, routines
from C11 threads are started slight different than default pthread one.
Explicit cast to expected return are used internally on pthread_create
and the result is stored back to void also with an explicit cast.
2. thrd_sleep uses nanosleep internal direct syscall to avoid clobbering
errno and to handle expected standard return codes. It is a
cancellation entrypoint to be consistent with both thrd_join and
cnd_{timed}wait.
3. thrd_yield also uses internal direct syscall to avoid errno clobbering.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/Makefile (conformtest-headers-ISO11): Add threads.h.
(linknamespace-libs-ISO11): Add libpthread.a.
* conform/data/threads.h-data: New file: add C11 thrd_* types and
functions.
* include/stdc-predef.h (__STDC_NO_THREADS__): Remove definition.
* nptl/Makefile (headers): Add threads.h.
(libpthread-routines): Add new C11 thread thrd_create, thrd_current,
thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and
thrd_yield.
* nptl/Versions (libpthread) [GLIBC_2.28]): Add new C11 thread
thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit,
thrd_join, thrd_sleep, and thrd_yield symbols.
* nptl/descr.h (struct pthread): Add c11 field.
* nptl/pthreadP.h (ATTR_C11_THREAD): New define.
* nptl/pthread_create.c (START_THREAD_DEFN): Call C11 thread start
routine with expected function prototype.
(__pthread_create_2_1): Add C11 threads check based on attribute
value.
* sysdeps/unix/sysdep.h (INTERNAL_SYSCALL_CANCEL): New macro.
* nptl/thrd_create.c: New file.
* nptl/thrd_current.c: Likewise.
* nptl/thrd_detach.c: Likewise.
* nptl/thrd_equal.c: Likewise.
* nptl/thrd_exit.c: Likewise.
* nptl/thrd_join.c: Likewise.
* nptl/thrd_priv.h: Likewise.
* nptl/thrd_sleep.c: Likewise.
* nptl/thrd_yield.c: Likewise.
* include/threads.h: Likewise.
feature_1 has X86_FEATURE_1_IBT and X86_FEATURE_1_SHSTK bits for CET
run-time control.
CET_ENABLED, IBT_ENABLED and SHSTK_ENABLED are defined to 1 or 0 to
indicate that if CET, IBT and SHSTK are enabled.
<tls-setup.h> is added to set up thread-local data.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #22563]
* nptl/pthread_create.c: Include <tls-setup.h>.
(__pthread_create_2_1): Call tls_setup_tcbhead.
* sysdeps/generic/tls-setup.h: New file.
* sysdeps/x86/nptl/tls-setup.h: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New.
* sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET):
Likewise.
* sysdeps/i386/nptl/tls.h (tcbhead_t): Rename __glibc_reserved1
to feature_1.
* sysdeps/x86_64/nptl/tls.h (tcbhead_t): Likewise.
* sysdeps/x86/sysdep.h (X86_FEATURE_1_IBT): New.
(X86_FEATURE_1_SHSTK): Likewise.
(CET_ENABLED): Likewise.
(IBT_ENABLED): Likewise.
(SHSTK_ENABLED): Likewise.
The pad array in struct pthread_unwind_buf is used by setjmp to save
shadow stack register. We assert that size of struct pthread_unwind_buf
is no less than offset of shadow stack pointer + shadow stack pointer
size.
Since functions, like LIBC_START_MAIN, START_THREAD_DEFN as well as
these with thread cancellation, call setjmp, but never return after
__libc_unwind_longjmp, __libc_unwind_longjmp, which is defined as
__libc_longjmp on x86, doesn't need to restore shadow stack register.
__libc_longjmp, which is a private interface for thread cancellation
implementation in libpthread, is changed to call __longjmp_cancel,
instead of __longjmp. __longjmp_cancel is a new internal function
in libc, which is similar to __longjmp, but doesn't restore shadow
stack register.
The compatibility longjmp and siglongjmp in libpthread.so are changed
to call __libc_siglongjmp, instead of __libc_longjmp, so that they will
restore shadow stack register.
Tested with build-many-glibcs.py.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nptl/pthread_create.c (START_THREAD_DEFN): Clear previous
handlers after setjmp.
* setjmp/longjmp.c (__libc_longjmp): Don't define alias if
defined.
* sysdeps/unix/sysv/linux/x86/setjmpP.h: Include
<libc-pointer-arith.h>.
(_JUMP_BUF_SIGSET_BITS_PER_WORD): New.
(_JUMP_BUF_SIGSET_NSIG): Changed to 96.
(_JUMP_BUF_SIGSET_NWORDS): Changed to use ALIGN_UP and
_JUMP_BUF_SIGSET_BITS_PER_WORD.
* sysdeps/x86/Makefile (sysdep_routines): Add __longjmp_cancel.
* sysdeps/x86/__longjmp_cancel.S: New file.
* sysdeps/x86/longjmp.c: Likewise.
* sysdeps/x86/nptl/pt-longjmp.c: Likewise.
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch fixes ia64 failures on thread exit by madvise the required
area taking in consideration its disjoing stacks
(NEED_SEPARATE_REGISTER_STACK). Also the snippet that setup the
madvise call to advertise kernel the area won't be used anymore in
near future is reallocated in allocatestack.c (for consistency to
put all stack management function in one place).
Checked on x86_64-linux-gnu and i686-linux-gnu for sanity (since
it is not expected code changes for architecture that do not
define NEED_SEPARATE_REGISTER_STACK) and also got a report that
it fixes ia64-linux-gnu failures from Sergei Trofimovich
<slyfox@gentoo.org>.
[BZ #21672]
* nptl/allocatestack.c [_STACK_GROWS_DOWN] (setup_stack_prot):
Set to use !NEED_SEPARATE_REGISTER_STACK as well.
(advise_stack_range): New function.
* nptl/pthread_create.c (START_THREAD_DEFN): Move logic to mark
stack non required to advise_stack_range at allocatestack.c
Locking overhead can be significant in some stdio operations
that are common in single threaded applications.
This patch adds the _IO_FLAGS2_NEED_LOCK flag to indicate if
an _IO_FILE object needs to be locked and some of the stdio
functions just jump to their _unlocked variant when not. The
flag is set on all _IO_FILE objects when the first thread is
created. A new GLIBC_PRIVATE libc symbol, _IO_enable_locks,
was added to do this from libpthread.
The optimization can be applied to more stdio functions,
currently it is only applied to single flag check or single
non-wide-char standard operations. The flag should probably
be never set for files with _IO_USER_LOCK, but that's just a
further optimization, not a correctness requirement.
The optimization is valid in a single thread because stdio
operations are non-as-safe (so lock state is not observable
from a signal handler) and stdio locks are recursive (so lock
state is not observable via deadlock). The optimization is not
valid if a thread may be created while an stdio lock is taken
and thus it should be disabled if any user code may run during
an stdio operation (interposed malloc, printf hooks, etc).
This makes the optimization more complicated for some stdio
operations (e.g. printf), but those are bigger and thus less
important to optimize so this patch does not try to do that.
* libio/libio.h (_IO_FLAGS2_NEED_LOCK, _IO_need_lock): Define.
* libio/libioP.h (_IO_enable_locks): Declare.
* libio/Versions (_IO_enable_locks): New symbol.
* libio/genops.c (_IO_enable_locks): Define.
(_IO_old_init): Initialize flags2.
* libio/feof.c.c (_IO_feof): Avoid locking when not needed.
* libio/ferror.c (_IO_ferror): Likewise.
* libio/fputc.c (fputc): Likewise.
* libio/putc.c (_IO_putc): Likewise.
* libio/getc.c (_IO_getc): Likewise.
* libio/getchar.c (getchar): Likewise.
* libio/ioungetc.c (_IO_ungetc): Likewise.
* nptl/pthread_create.c (__pthread_create_2_1): Enable stdio locks.
* libio/iofopncook.c (_IO_fopencookie): Enable locking for the file.
* sysdeps/pthread/flockfile.c (__flockfile): Likewise.
This patch removes CALL_THREAD_FCT macro usage and its defition for
x86. For 32 bits it usage is only for force 16 stack alignment,
however stack is already explicit aligned in clone syscall. For
64 bits and x32 it just a function call and there is no need to
code it with inline assembly.
Checked on i686-linux-gnu, x86_64-linux-gnu, and x86_64-linux-gnu-x32.
* nptl/pthread_create.c (START_THREAD_DEFN): Remove
CALL_THREAD_FCT macro usage.
* sysdeps/i386/nptl/tls.h (CALL_THREAD_FCT): Remove definition.
* sysdeps/x86_64/nptl/tls.h (CALL_THREAD_FCT): Likewise.
* sysdeps/x86_64/32/nptl/tls.h: Remove file.
The commit documents the ownership rules around 'struct pthread' and
when a thread can read or write to the descriptor. With those ownership
rules in place it becomes obvious that pd->stopped_start should not be
touched in several of the paths during thread startup, particularly so
for detached threads. In the case of detached threads, between the time
the thread is created by the OS kernel and the creating thread checks
pd->stopped_start, the detached thread might have already exited and the
memory for pd unmapped. As a regression test we add a simple test which
exercises this exact case by quickly creating detached threads with
large enough stacks to ensure the thread stack cache is bypassed and the
stacks are unmapped. Before the fix the testcase segfaults, after the
fix it works correctly and completes without issue.
For a detailed discussion see:
https://www.sourceware.org/ml/libc-alpha/2017-01/msg00505.html
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
This adds new functions for futex operations, starting with wait,
abstimed_wait, reltimed_wait, wake. They add documentation and error
checking according to the current draft of the Linux kernel futex manpage.
Waiting with absolute or relative timeouts is split into separate functions.
This allows for removing a few cases of code duplication in pthreads code,
which uses absolute timeouts; also, it allows us to put platform-specific
code to go from an absolute to a relative timeout into the platform-specific
futex abstractions..
Futex operations that can be canceled are also split out into separate
functions suffixed by "_cancelable".
There are separate versions for both Linux and NaCl; while they currently
differ only slightly, my expectation is that the separate versions of
lowlevellock-futex.h will eventually be merged into futex-internal.h
when we get to move the lll_ functions over to the new futex API.
This patch introduces two new convenience functions to set the default
thread attributes used for creating threads. This allows a programmer
to set the default thread attributes just once in a process and then
run pthread_create without additional attributes.
This feature is specifically for the C++ compiler to offload calling
thread_local object destructors on thread program exit, to glibc.
This is to overcome the possible complication of destructors of
thread_local objects getting called after the DSO in which they're
defined is unloaded by the dynamic linker. The DSO is marked as
'unloadable' if it has a constructed thread_local object and marked as
'unloadable' again when all the constructed thread_local objects
defined in it are destroyed.
2008-04-09 Ulrich Drepper <drepper@redhat.com>
* stdlib/tst-makecontext.c: Change parameter to cf to negative
value to check for correct sign extension.
[BZ #5436]
* sysdeps/unix/sysv/linux/x86_64/makecontext.c (__makecontext):
Copy 64-bit parameter values even though this is not required in
the standard.
* sysdeps/unix/sysv/linux/x86_64/vfork.S (__vfork): Record return
PC save.
Use __asm __volatile (__lll_acq_instr ::: "memory") instead of
atomic_full_barrier.
2007-07-31 Jakub Jelinek <jakub@redhat.com>
* allocatestack.c (stack_cache_lock): Change type to int.
(get_cached_stack, allocate_stack, __deallocate_stack,
__make_stacks_executable, __find_thread_by_id, __nptl_setxid,
__pthread_init_static_tls, __wait_lookup_done): Add LLL_PRIVATE
as second argument to lll_lock and lll_unlock macros on
stack_cache_lock.
* pthread_create.c (__find_in_stack_list): Likewise.
(start_thread): Similarly with pd->lock. Use lll_robust_dead
macro instead of lll_robust_mutex_dead, pass LLL_SHARED to it
as second argument.
* descr.h (struct pthread): Change lock and setxid_futex field
type to int.
* old_pthread_cond_broadcast.c (__pthread_cond_broadcast_2_0): Use
LLL_LOCK_INITIALIZER instead of LLL_MUTEX_LOCK_INITIALIZER.
* old_pthread_cond_signal.c (__pthread_cond_signal_2_0): Likewise.
* old_pthread_cond_timedwait.c (__pthread_cond_timedwait_2_0):
Likewise.
* old_pthread_cond_wait.c (__pthread_cond_wait_2_0): Likewise.
* pthread_cond_init.c (__pthread_cond_init): Likewise.
* pthreadP.h (__attr_list_lock): Change type to int.
* pthread_attr_init.c (__attr_list_lock): Likewise.
* pthread_barrier_destroy.c (pthread_barrier_destroy): Pass
ibarrier->private ^ FUTEX_PRIVATE_FLAG as second argument to
lll_{,un}lock.
* pthread_barrier_wait.c (pthread_barrier_wait): Likewise and
also for lll_futex_{wake,wait}.
* pthread_barrier_init.c (pthread_barrier_init): Make iattr
a pointer to const.
* pthread_cond_broadcast.c (__pthread_cond_broadcast): Pass
LLL_SHARED as second argument to lll_{,un}lock.
* pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
* pthread_cond_signal.c (__pthread_cond_singal): Likewise.
* pthread_cond_timedwait.c (__pthread_cond_timedwait): Likewise.
* pthread_cond_wait.c (__condvar_cleanup, __pthread_cond_wait):
Likewise.
* pthread_getattr_np.c (pthread_getattr_np): Add LLL_PRIVATE
as second argument to lll_{,un}lock macros on pd->lock.
* pthread_getschedparam.c (__pthread_getschedparam): Likewise.
* pthread_setschedparam.c (__pthread_setschedparam): Likewise.
* pthread_setschedprio.c (pthread_setschedprio): Likewise.
* tpp.c (__pthread_tpp_change_priority, __pthread_current_priority):
Likewise.
* sysdeps/pthread/createthread.c (do_clone, create_thread):
Likewise.
* pthread_once.c (once_lock): Change type to int.
(__pthread_once): Pass LLL_PRIVATE as second argument to
lll_{,un}lock macros on once_lock.
* pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock): Use
lll_{,un}lock macros instead of lll_mutex_{,un}lock, pass
rwlock->__data.__shared as second argument to them and similarly
for lll_futex_w*.
* pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Likewise.
* pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Likewise.
* pthread_rwlock_tryrdlock.c (__pthread_rwlock_tryrdlock): Likewise.
* pthread_rwlock_trywrlock.c (__pthread_rwlock_trywrlock): Likewise.
* pthread_rwlock_unlock.c (__pthread_rwlock_unlock): Likewise.
* pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Likewise.
* sem_close.c (sem_close): Pass LLL_PRIVATE as second argument
to lll_{,un}lock macros on __sem_mappings_lock.
* sem_open.c (check_add_mapping): Likewise.
(__sem_mappings_lock): Change type to int.
* semaphoreP.h (__sem_mappings_lock): Likewise.
* pthread_mutex_lock.c (LLL_MUTEX_LOCK, LLL_MUTEX_TRYLOCK,
LLL_ROBUST_MUTEX_LOCK): Use lll_{,try,robust_}lock macros
instead of lll_*mutex_*, pass LLL_SHARED as last
argument.
(__pthread_mutex_lock): Use lll_unlock instead of lll_mutex_unlock,
pass LLL_SHARED as last argument.
* sysdeps/unix/sysv/linux/pthread_mutex_cond_lock.c (LLL_MUTEX_LOCK,
LLL_MUTEX_TRYLOCK, LLL_ROBUST_MUTEX_LOCK): Use
lll_{cond_,cond_try,robust_cond}lock macros instead of lll_*mutex_*,
pass LLL_SHARED as last argument.
* pthread_mutex_timedlock.c (pthread_mutex_timedlock): Use
lll_{timed,try,robust_timed,un}lock instead of lll_*mutex*, pass
LLL_SHARED as last argument.
* pthread_mutex_trylock.c (__pthread_mutex_trylock): Similarly.
* pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Similarly.
* sysdeps/pthread/bits/libc-lock.h (__libc_lock_lock,
__libc_lock_lock_recursive, __libc_lock_unlock,
__libc_lock_unlock_recursive): Pass LLL_PRIVATE as second
argument to lll_{,un}lock.
* sysdeps/pthread/bits/stdio-lock.h (_IO_lock_lock,
_IO_lock_unlock): Likewise.
* sysdeps/unix/sysv/linux/fork.c (__libc_fork): Don't use
compound literal.
* sysdeps/unix/sysv/linux/unregister-atfork.c (__unregister_atfork):
Pass LLL_PRIVATE as second argument to lll_{,un}lock macros on
__fork_lock.
* sysdeps/unix/sysv/linux/register-atfork.c (__register_atfork,
free_mem): Likewise.
(__fork_lock): Change type to int.
* sysdeps/unix/sysv/linux/fork.h (__fork_lock): Likewise.
* sysdeps/unix/sysv/linux/sem_post.c (__new_sem_post): Pass
isem->private ^ FUTEX_PRIVATE_FLAG as second argument to
lll_futex_wake.
* sysdeps/unix/sysv/linux/sem_timedwait.c (sem_timedwait): Likewise.
* sysdeps/unix/sysv/linux/sem_wait.c (__new_sem_wait): Likewise.
* sysdeps/unix/sysv/linux/lowlevellock.c (__lll_lock_wait_private):
New function.
(__lll_lock_wait, __lll_timedlock_wait): Add private argument and
pass it through to lll_futex_*wait, only compile in when
IS_IN_libpthread.
* sysdeps/unix/sysv/linux/lowlevelrobustlock.c
(__lll_robust_lock_wait, __lll_robust_timedlock_wait): Add private
argument and pass it through to lll_futex_*wait.
* sysdeps/unix/sysv/linux/alpha/lowlevellock.h: Renamed all
lll_mutex_* resp. lll_robust_mutex_* macros to lll_* resp.
lll_robust_*. Renamed all __lll_mutex_* resp. __lll_robust_mutex_*
inline functions to __lll_* resp. __lll_robust_*.
(LLL_MUTEX_LOCK_INITIALIZER): Remove.
(lll_mutex_dead): Add private argument.
(__lll_lock_wait_private): New prototype.
(__lll_lock_wait, __lll_robust_lock_wait, __lll_lock_timedwait,
__lll_robust_lock_timedwait): Add private argument to prototypes.
(__lll_lock): Add private argument, if it is constant LLL_PRIVATE,
call __lll_lock_wait_private, otherwise pass private to
__lll_lock_wait.
(__lll_robust_lock, __lll_cond_lock, __lll_timedlock,
__lll_robust_timedlock): Add private argument, pass it to
__lll_*wait functions.
(__lll_unlock): Add private argument, if it is constant LLL_PRIVATE,
call __lll_unlock_wake_private, otherwise pass private to
__lll_unlock_wake.
(__lll_robust_unlock): Add private argument, pass it to
__lll_robust_unlock_wake.
(lll_lock, lll_robust_lock, lll_cond_lock, lll_timedlock,
lll_robust_timedlock, lll_unlock, lll_robust_unlock): Add private
argument, pass it through to __lll_* inline function.
(__lll_mutex_unlock_force, lll_mutex_unlock_force): Remove.
(lll_lock_t): Remove.
(__lll_cond_wait, __lll_cond_timedwait, __lll_cond_wake,
__lll_cond_broadcast, lll_cond_wait, lll_cond_timedwait,
lll_cond_wake, lll_cond_broadcast): Remove.
* sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Allow including
the header from assembler. Renamed all lll_mutex_* resp.
lll_robust_mutex_* macros to lll_* resp. lll_robust_*.
(LOCK, FUTEX_CMP_REQUEUE, FUTEX_WAKE_OP,
FUTEX_OP_CLEAR_WAKE_IF_GT_ONE): Define.
(LLL_MUTEX_LOCK_INITIALIZER, LLL_MUTEX_LOCK_INITIALIZER_LOCKED,
LLL_MUTEX_LOCK_INITIALIZER_WAITERS): Remove.
(__lll_mutex_lock_wait, __lll_mutex_timedlock_wait,
__lll_mutex_unlock_wake, __lll_lock_wait, __lll_unlock_wake):
Remove prototype.
(__lll_trylock_asm, __lll_lock_asm_start, __lll_unlock_asm): Define.
(lll_robust_trylock, lll_cond_trylock): Use LLL_LOCK_INITIALIZER*
rather than LLL_MUTEX_LOCK_INITIALIZER* macros.
(lll_trylock): Likewise, use __lll_trylock_asm, pass
MULTIPLE_THREADS_OFFSET as another asm operand.
(lll_lock): Add private argument, use __lll_lock_asm_start, pass
MULTIPLE_THREADS_OFFSET as last asm operand, call
__lll_lock_wait_private if private is constant LLL_PRIVATE,
otherwise pass private as another argument to __lll_lock_wait.
(lll_robust_lock, lll_cond_lock, lll_robust_cond_lock,
lll_timedlock, lll_robust_timedlock): Add private argument, pass
private as another argument to __lll_*lock_wait call.
(lll_unlock): Add private argument, use __lll_unlock_asm, pass
MULTIPLE_THREADS_OFFSET as another asm operand, call
__lll_unlock_wake_private if private is constant LLL_PRIVATE,
otherwise pass private as another argument to __lll_unlock_wake.
(lll_robust_unlock): Add private argument, pass private as another
argument to __lll_unlock_wake.
(lll_robust_dead): Add private argument, use __lll_private_flag
macro.
(lll_islocked): Use LLL_LOCK_INITIALIZER instead of
LLL_MUTEX_LOCK_INITIALIZER.
(lll_lock_t): Remove.
(LLL_LOCK_INITIALIZER_WAITERS): Define.
(__lll_cond_wait, __lll_cond_timedwait, __lll_cond_wake,
__lll_cond_broadcast, lll_cond_wait, lll_cond_timedwait,
lll_cond_wake, lll_cond_broadcast): Remove.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/libc-lowlevellock.S: Revert
2007-05-2{3,9} changes.
* sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Include
kernel-features.h and lowlevellock.h.
(LOAD_PRIVATE_FUTEX_WAIT): Define.
(LOAD_FUTEX_WAIT): Rewritten.
(LOCK, SYS_gettimeofday, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't
define.
(__lll_lock_wait_private, __lll_unlock_wake_private): New functions.
(__lll_mutex_lock_wait): Rename to ...
(__lll_lock_wait): ... this. Take futex addr from %edx instead of
%ecx, %ecx is now private argument. Don't compile in for libc.so.
(__lll_mutex_timedlock_wait): Rename to ...
(__lll_timedlock_wait): ... this. Use __NR_gettimeofday. %esi
contains private argument. Don't compile in for libc.so.
(__lll_mutex_unlock_wake): Rename to ...
(__lll_unlock_wake): ... this. %ecx contains private argument.
Don't compile in for libc.so.
(__lll_timedwait_tid): Use __NR_gettimeofday.
* sysdeps/unix/sysv/linux/i386/i486/lowlevelrobustlock.S: Include
kernel-features.h and lowlevellock.h.
(LOAD_FUTEX_WAIT): Define.
(LOCK, SYS_gettimeofday, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't
define.
(__lll_robust_mutex_lock_wait): Rename to ...
(__lll_robust_lock_wait): ... this. Futex addr is now in %edx
argument, %ecx argument contains private. Use LOAD_FUTEX_WAIT
macro.
(__lll_robust_mutex_timedlock_wait): Rename to ...
(__lll_robust_timedlock_wait): ... this. Use __NR_gettimeofday.
%esi argument contains private, use LOAD_FUTEX_WAIT macro.
* sysdeps/unix/sysv/linux/i386/i486/pthread_barrier_wait.S: Include
lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(pthread_barrier_wait): Rename __lll_mutex_* to __lll_*, pass
PRIVATE(%ebx) ^ LLL_SHARED as private argument in %ecx to
__lll_lock_wait and __lll_unlock_wake, pass MUTEX(%ebx) address
to __lll_lock_wait in %edx.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S:
Include lowlevellock.h and pthread-errnos.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_REQUEUE,
FUTEX_CMP_REQUEUE, EINVAL, LOCK): Don't define.
(__pthread_cond_broadcast): Rename __lll_mutex_* to __lll_*, pass
cond_lock address in %edx rather than %ecx to __lll_lock_wait,
pass LLL_SHARED in %ecx to both __lll_lock_wait and
__lll_unlock_wake.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S:
Include lowlevellock.h and pthread-errnos.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_WAKE_OP,
FUTEX_OP_CLEAR_WAKE_IF_GT_ONE, EINVAL, LOCK): Don't define.
(__pthread_cond_signal): Rename __lll_mutex_* to __lll_*, pass
cond_lock address in %edx rather than %ecx to __lll_lock_wait,
pass LLL_SHARED in %ecx to both __lll_lock_wait and
__lll_unlock_wake.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S:
Include lowlevellock.h.
(SYS_futex, SYS_gettimeofday, FUTEX_WAIT, FUTEX_WAKE, LOCK):
Don't define.
(__pthread_cond_timedwait): Rename __lll_mutex_* to __lll_*, pass
cond_lock address in %edx rather than %ecx to __lll_lock_wait,
pass LLL_SHARED in %ecx to both __lll_lock_wait and
__lll_unlock_wake. Use __NR_gettimeofday.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(__pthread_cond_wait, __condvar_w_cleanup): Rename __lll_mutex_*
to __lll_*, pass cond_lock address in %edx rather than %ecx to
__lll_lock_wait, pass LLL_SHARED in %ecx to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_rdlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(__pthread_rwlock_rdlock): Rename __lll_mutex_* to __lll_*, pass
MUTEX(%ebx) address in %edx rather than %ecx to
__lll_lock_wait, pass PSHARED(%ebx) in %ecx to both __lll_lock_wait
and __lll_unlock_wake. Move return value from %ecx to %edx
register.
* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_timedrdlock.S:
Include lowlevellock.h.
(SYS_futex, SYS_gettimeofday, FUTEX_WAIT, FUTEX_WAKE, LOCK):
Don't define.
(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*, pass
MUTEX(%ebp) address in %edx rather than %ecx to
__lll_lock_wait, pass PSHARED(%ebp) in %ecx to both __lll_lock_wait
and __lll_unlock_wake. Move return value from %ecx to %edx
register. Use __NR_gettimeofday.
* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_timedwrlock.S:
Include lowlevellock.h.
(SYS_futex, SYS_gettimeofday, FUTEX_WAIT, FUTEX_WAKE, LOCK):
Don't define.
(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*, pass
MUTEX(%ebp) address in %edx rather than %ecx to
__lll_lock_wait, pass PSHARED(%ebp) in %ecx to both __lll_lock_wait
and __lll_unlock_wake. Move return value from %ecx to %edx
register. Use __NR_gettimeofday.
* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_unlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(__pthread_rwlock_unlock): Rename __lll_mutex_* to __lll_*, pass
MUTEX(%edi) address in %edx rather than %ecx to
__lll_lock_wait, pass PSHARED(%edi) in %ecx to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_wrlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*, pass
MUTEX(%ebx) address in %edx rather than %ecx to
__lll_lock_wait, pass PSHARED(%ebx) in %ecx to both __lll_lock_wait
and __lll_unlock_wake. Move return value from %ecx to %edx
register.
* sysdeps/unix/sysv/linux/i386/pthread_once.S: Include
lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG): Don't
define.
* sysdeps/unix/sysv/linux/i386/i486/sem_post.S: Include lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAKE): Don't define.
* sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Include
lowlevellock.h.
(LOCK, SYS_futex, SYS_gettimeofday, FUTEX_WAIT): Don't define.
(sem_timedwait): Use __NR_gettimeofday.
* sysdeps/unix/sysv/linux/i386/i486/sem_trywait.S: Include
lowlevellock.h.
(LOCK): Don't define.
* sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Include
lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAIT): Don't define.
* sysdeps/unix/sysv/linux/powerpc/sem_post.c: Wake only when there
are waiters.
* sysdeps/unix/sysv/linux/x86_64/libc-lowlevellock.S: Revert
2007-05-2{3,9} changes.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Include
kernel-features.h and lowlevellock.h.
(LOAD_PRIVATE_FUTEX_WAIT): Define.
(LOAD_FUTEX_WAIT): Rewritten.
(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't define.
(__lll_lock_wait_private, __lll_unlock_wake_private): New functions.
(__lll_mutex_lock_wait): Rename to ...
(__lll_lock_wait): ... this. %esi is now private argument.
Don't compile in for libc.so.
(__lll_mutex_timedlock_wait): Rename to ...
(__lll_timedlock_wait): ... this. %esi contains private argument.
Don't compile in for libc.so.
(__lll_mutex_unlock_wake): Rename to ...
(__lll_unlock_wake): ... this. %esi contains private argument.
Don't compile in for libc.so.
* sysdeps/unix/sysv/linux/x86_64/lowlevelrobustlock.S: Include
kernel-features.h and lowlevellock.h.
(LOAD_FUTEX_WAIT): Define.
(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't define.
(__lll_robust_mutex_lock_wait): Rename to ...
(__lll_robust_lock_wait): ... this. %esi argument contains private.
Use LOAD_FUTEX_WAIT macro.
(__lll_robust_mutex_timedlock_wait): Rename to ...
(__lll_robust_timedlock_wait): ... this. %esi argument contains
private, use LOAD_FUTEX_WAIT macro.
* sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S: Include
lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(pthread_barrier_wait): Rename __lll_mutex_* to __lll_*, pass
PRIVATE(%rdi) ^ LLL_SHARED as private argument in %esi to
__lll_lock_wait and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S:
Include lowlevellock.h and pthread-errnos.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_REQUEUE,
FUTEX_CMP_REQUEUE, EINVAL, LOCK): Don't define.
(__pthread_cond_broadcast): Rename __lll_mutex_* to __lll_*,
pass LLL_SHARED in %esi to both __lll_lock_wait and
__lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S:
Include lowlevellock.h and pthread-errnos.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_WAKE_OP,
FUTEX_OP_CLEAR_WAKE_IF_GT_ONE, EINVAL, LOCK): Don't define.
(__pthread_cond_signal): Rename __lll_mutex_* to __lll_*,
pass LLL_SHARED in %esi to both __lll_lock_wait and
__lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(__pthread_cond_timedwait): Rename __lll_mutex_* to __lll_*,
pass LLL_SHARED in %esi to both __lll_lock_wait and
__lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
(__pthread_cond_wait, __condvar_cleanup): Rename __lll_mutex_*
to __lll_*, pass LLL_SHARED in %esi to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_rdlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
Don't define.
(__pthread_rwlock_rdlock): Rename __lll_mutex_* to __lll_*,
pass PSHARED(%rdi) in %esi to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_timedrdlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
Don't define.
(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*,
pass PSHARED(%rdi) in %esi to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_timedwrlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
Don't define.
(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*,
pass PSHARED(%rdi) in %esi to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_unlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
Don't define.
(__pthread_rwlock_unlock): Rename __lll_mutex_* to __lll_*,
pass PSHARED(%rdi) in %esi to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_wrlock.S:
Include lowlevellock.h.
(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
Don't define.
(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*,
pass PSHARED(%rdi) in %ecx to both __lll_lock_wait
and __lll_unlock_wake.
* sysdeps/unix/sysv/linux/x86_64/pthread_once.S: Include
lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG): Don't
define.
* sysdeps/unix/sysv/linux/x86_64/sem_post.S: Include lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAKE): Don't define.
* sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Include
lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAIT): Don't define.
* sysdeps/unix/sysv/linux/x86_64/sem_trywait.S: Include
lowlevellock.h.
(LOCK): Don't define.
* sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Include
lowlevellock.h.
(LOCK, SYS_futex, FUTEX_WAIT): Don't define.
* sysdeps/unix/sysv/linux/sparc/internaltypes.h: New file.
* sysdeps/unix/sysv/linux/sparc/pthread_barrier_destroy.c: New file.
* sysdeps/unix/sysv/linux/sparc/pthread_barrier_init.c: New file.
* sysdeps/unix/sysv/linux/sparc/pthread_barrier_wait.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/lowlevellock.c
(__lll_lock_wait_private): New function.
(__lll_lock_wait, __lll_timedlock_wait): Add private argument, pass
it to lll_futex_*wait. Don't compile in for libc.so.
* sysdeps/unix/sysv/linux/sparc/sparc32/pthread_barrier_init.c:
Remove.
* sysdeps/unix/sysv/linux/sparc/sparc32/pthread_barrier_wait.c
(struct sparc_pthread_barrier): Remove.
(pthread_barrier_wait): Use union sparc_pthread_barrier instead of
struct sparc_pthread_barrier. Pass
ibarrier->s.pshared ? LLL_SHARED : LLL_PRIVATE to lll_{,un}lock
and lll_futex_wait macros.
* sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/pthread_barrier_init.c:
Remove.
* sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/pthread_barrier_wait.c:
Include sparc pthread_barrier_wait.c instead of generic one.
char array resp. pointer.
* iconvdata/iso-2022-kr.c (BODY): Make buf unsigned char instead of
char array.
* iconvdata/cns11643.h (cns11643_to_ucs4): Change first argument
to const unsigned char **.
(ucs4_to_cns11643): Change second argument to unsigned char *.
* iconvdata/euc-tw.c (BODY): Change endp type to
const unsigned char *.
* iconvdata/iso-ir-165.h (ucs4_to_isoir165): Change second argument
to unsigned char *.
* iconvdata/ibm1008_420.c (LOOP_NEED_FLAGS): Don't define.
* iconvdata/iso-2022-cn.c (BODY): Change buf to unsigned char array.
* iconvdata/iso-2022-cn-ext.c (BODY): Change buf, tmpbuf, tmp
types to unsigned char pointers/arrays instead of char.
* iconvdata/jis0201.h (ucs4_to_jisx0201): Change second argument
to unsigned char *.
* iconvdata/jis0208.h (ucs4_to_jisx0208): Likewise.
* iconvdata/jis0212.h: Include assert.h.
(ucs4_to_jisx0212): Change second argument to unsigned char *.
assert that if cp[0] is not '\0', cp[1] is not '\0' either instead
of trying to handle that.
* iconvdata/euc-kr.c (euckr_from_ucs4): Initialize also cp[1] to
shut up a warning.
* iconvdata/euc-jp-ms.c (from_ucs4_lat1, from_ucs4_greek,
from_ucs4_cjk, from_ucs4_cjkcpt, from_ucs4_extra): Change type to
two dimensional const unsigned char arrays.
(BODY): Cast "" to (const unsigned char *) for assignment to cp.
Initialize endp to inptr to shut up a warning.
__openat64_not_cancel): Remove prototypes.
(__openat_nocancel, __openat64_nocancel): New prototypes or defines.
(openat_not_cancel, openat_not_cancel_3, openat64_not_cancel,
openat64_not_cancel_3): Use them.
* init.c (__pthread_initialize_minimal_internal): Likewise.
* descr.h (struct xid_command): Pretty printing.
(struct pthread): Use __pthread_list_t or __pthread_slist_t for
robust_list. Adjust macros.
* pthread_create.c (start_thread): Adjust robust_list handling.
* phtread_mutex_unlock.c: Don't allow unlocking from any thread
but the owner for all robust mutex types.
* sysdeps/unix/sysv/linux/i386/bits/pthreadtypes.h: Define
__pthread_list_t and __pthread_slist_t. Use them in pthread_mutex_t.
* sysdeps/pthread/pthread.h: Adjust mutex initializers.
Don't give the union a name because it changes the mangled name.
Instead name the struct for __data.
* sysdeps/unix/sysv/linux/ia64/bits/pthreadtypes.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Likewise.
* sysdeps/unix/sysv/linux/s390/bits/pthreadtypes.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/bits/pthreadtypes.h: Likewise.
* pthread_create.c (start_thread): Adjust robust mutex free loop.
* descr.h (ENQUEUE_MUTEX, DEQUEUE_MUTEX): Adjust.
* elf/rtld.c: Define __pointer_chk_guard_local and if necessary
__pointer_chk_guard.
(_rtld_global_ro): Initialize _dl_pointer_guard.
(dl_main): Initialize __pointer_chk_guard_local and either
__pointer_chk_guard or TLS value if necessary.
(process_envvars): Recognize and handle LD_POINTER_GUARD.
* sysdeps/generic/ldsodefs.h (rtld_global_ro): Add _dl_pointer_guard.
* sysdeps/i386/__longjmp.S: Use PTR_DEMANGLE for PC if defined.
* sysdeps/x86_64/__longjmp.S: Likewise.
* sysdeps/i386/bsd-_setjmp.S: Use PTR_MANGLE for PC if defined.
* sysdeps/i386/bsd-_setjmp.S: Likewise.
* sysdeps/i386/setjmp.S: Likewise.
[IS_IN_rtld]: Avoid call to __sigjmp_save.
* sysdeps/i386/setjmp.S: Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Define PTR_MANGLE and
PTR_DEMANGLE.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise.
* sysdeps/i386/elf/setjmp.S: Removed.
* sysdeps/i386/elf/bsd-setjmp.S: Removed.
Jakub Jelinek <jakub@redhat.com>
* descr.h: Define SETXID_BIT and SETXID_BITMASK. Adjust
CANCEL_RESTMASK.
(struct pthread): Move specific_used field to avoid padding.
Add setxid_futex field.
* init.c (sighandler_setxid): Reset setxid flag and release the
setxid futex.
* allocatestack.c (setxid_signal_thread): New function. Broken
out of the bodies of the two loops in __nptl_setxid. For undetached
threads check whether they are exiting and if yes, don't send a signal.
(__nptl_setxid): Simplify loops by using setxid_signal_thread.
* pthread_create.c (start_thread): For undetached threads, check
whether setxid bit is set. If yes, wait until signal has been
processed.
* allocatestack.c (STACK_VARIABLES): Initialize them.
* pthread_create.c (__pthread_create_2_1): Initialize pd.
* configure.in: Add --enable-stackguard-randomization option.
(ENABLE_STACKGUARD_RANDOMIZE): New define.
* config.h.in (ENABLE_STACKGUARD_RANDOMIZE): Add.
* sysdeps/unix/sysv/linux/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* sysdeps/generic/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* elf/rtld.c (__stack_chk_guard): New variable.
(dl_main): Remove all traces of TLS_INIT_TP_EXPENSIVE.
Set __stack_chk_guard to _dl_setup_stack_chk_guard (),
use THREAD_SET_STACK_GUARD if defined.
* elf/Versions (ld): Export __stack_chk_guard@@GLIBC_2.4.
* sysdeps/generic/libc-start.c (__stack_chk_guard): New variable.
(__libc_start_main): Set __stack_chk_guard to
_dl_setup_stack_chk_guard (), use THREAD_SET_STACK_GUARD if defined.
* sysdeps/generic/libc-tls.c (__libc_setup_tls): Remove all
traces of TLS_INIT_TP_EXPENSIVE.
* debug/Versions (libc): Export __stack_chk_fail@@GLIBC_2.4.
* debug/Makefile (routines): Add stack_chk_fail.
(static-only-routines): Add stack_chk_fail_local.
* debug/stack_chk_fail_local.c: New file.
* debug/stack_chk_fail.c: New file.
* elf/Makefile: Add rules to build and run tst-stackguard1{,-static}
tests.
* elf/tst-stackguard1.c: New file.
* elf/tst-stackguard1-static.c: New file.
* elf/stackguard-macros.h: New file.
2004-11-20 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/bits/socket.h (SCM_RIGHTS): Avoid
comma at the end of enum if __USE_BSD is not defined.
(calc_inveclosure, calc_eclosure): Skip OP_DELETED_SUBEXP nodes.
2004-10-28 Jakub Jelinek <jakub@redhat.com>
* pthread_create.c (__pthread_create_2_1): Avoid leaking stacks
if sched_priority is not between minprio and maxprio.
2004-09-25 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/i386/setuid.c (__setuid): Remove second
result declaration.
2004-09-22 Andreas Schwab <schwab@suse.de>
* sysdeps/unix/sysv/linux/ia64/sysdep.h: Adjust whitespace.
* pthread_attr_setschedparam.c: Don't test priority against limits
here. Set ATTR_FLAG_SCHED_SET flag.
* pthread_attr_setschedpolicy.c: Set ATTR_FLAG_POLICY_SET flag.
* pthread_create.c (__pthread_create_2_1): Copy scheduling attributes
from parent thread to child. If attribute is used and scheduling
parameters are not inherited, copy parameters from attribute or
compute them. Check priority value.
* pthread_getschedparam.c: If the parameters aren't known yet get
them from the kernel.
* pthread_setschedparam.c: Set ATTR_FLAG_SCHED_SET and
ATTR_FLAG_POLICY_SET flag for thread.
* sysdeps/unix/sysv/linux/internaltypes.h: Define ATTR_FLAG_SCHED_SET
and ATTR_FLAG_POLICY_SET.
* sysdeps/pthread/createthread.c: Use tgkill if possible.
(cfsetospeed): Only set c_ospeed under [_HAVE_STRUCT_TERMIOS_C_OSPEED].
(cfsetispeed): Only set c_ispeed under [_HAVE_STRUCT_TERMIOS_C_ISPEED].
* sysdeps/unix/sysv/linux/bits/termios.h
(_HAVE_STRUCT_TERMIOS_C_ISPEED, _HAVE_STRUCT_TERMIOS_C_OSPEED): Define.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/pthread/createthread.c (do_clone): If __ASSUME_CLONE_STOPPED
is not defined, do explicit synchronization.
(create_thread): Do not lock pd->lock here. If __ASSUME_CLONE_STOPPED
is not defined also unlock pd->lock for non-debugging case in case
it is necessary.
* pthread_create.c (start_thread): Always get and release pd->lock
if __ASSUME_CLONE_STOPPED is not defined.
(start_thread_debug): Removed. Adjust users.
* allocatestack.c (allocate_stack): Always initialize lock if
__ASSUME_CLONE_STOPPED is not defined.
* Makefile (tests): Add tst-sched1.
* tst-sched1.c: New file.
2003-07-22 Jakub Jelinek <jakub@redhat.com>
* include/resolv.h (__resp): Declare. Define to __libc_resp
if in libc.so.
(_res): If USE___THREAD, define to (*__resp).
* resolv/res_libc.c (_res): Normal .bss variable with compat_symbol
even if USE___THREAD.
(__resp): New __thread variable.
(__libc_resp): New alias.
* resolv/Versions (libc): Export _res@GLIBC_2.0 even if
USE_TLS && HAVE___THREAD. Export __resp@@GLIBC_PRIVATE.
* sysdeps/generic/res-state.c (__res_state): Return __resp
if USE___THREAD.
2003-07-20 Ulrich Drepper <drepper@redhat.com>
* Makefile (libpthread-routines): Add pthread_attr_getaffinity and
pthread_attr_setaffinity.
* Versions [libpthread] (GLIBC_2.3.3): Likewise.
* sysdeps/unix/sysv/linux/pthread_attr_getaffinity.c: New file.
* sysdeps/unix/sysv/linux/pthread_attr_setaffinity.c: New file.
* pthread_attr_destroy.c: Free cpuset element if allocated.
* pthread_create.c: Pass iattr as additional parameter to
create_thread.
* sysdeps/pthread/createthread.c: If attribute is provided and
a new thread is created with affinity set or scheduling parameters,
start thread with CLONE_STOPPED.
* sysdeps/pthread/pthread.h: Declare pthread_attr_getaffinity and
pthread_attr_setaffinity.
* sysdeps/unix/sysv/linux/internaltypes.h (struct pthread_attr): Add
cpuset element.
2003-04-01 Ulrich Drepper <drepper@redhat.com>
* pthread_create.c (deallocate_tsd): Clear/free memory after the last
round, not the first. Use specific_used flag instead of local
found_nonzero variable. Use THREAD_[SG]ETMEM where possible.
(__free_tcb): Don't call deallocate_tsd here.
(start_thread): Call deallocate_tsd here.
* pthread_setspecific.c: Set specific_used flag really only when
needed.
* Makefile (tests): Add tst-tsd3.c
* tst-tsd3.c: New file.
