This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.
Two, however, have a single target combining mtrace with something
else. In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace. In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.
This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.
Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.
Tested x86_64.
* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
separate $(objpfx)tst-fopenloc-cmp.out and
$(objpfx)tst-fopenloc-mem.out targets.
(tests): Update dependencies.
* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
(tst-rxspencer-no-utf8-ARGS): New variable.
(tst-rxspencer-no-utf8-ENV): Likewise.
(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
instead of $(objpfx)tst-rxspencer-mem.
($(objpfx)tst-rxspencer-mem): Change target to
$(objpfx)tst-rxspencer-no-utf8-mem. Depend on
$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
* posix/tst-rxspencer-no-utf8.c: New file.
This helps testing for regression of BZ#15339. Creation of network
isolated environments is a privileged operation and therefore is not
included to the test.
Fixes BZ #12723
The variable pipe buffer size does nothing to the value of PIPE_BUF,
since the number of bytes that are atomically written is still
PIPE_BUF on Linux.
* posix/regex_internal.c (re_string_skip_chars): Fix miscomputation
of remain_len that may cause incomplete multi-byte character and
false match.
* posix/bug-regex33.c: New file.
* posix/Makefile (tests): Add bug-regex33.
This is another bug in computing the fastmap. It was reported by a user
of sed because it usually does not happen with !_LIBC. However, it is
there in that case too.
The bug is that whenever we have a range at the beginning of the regex,
the regex must be tested on any possible multibyte character. The reason
why _LIBC masks it, is that in general there is a collation symbol for
each possible multibyte-character lead byte, so all the lead bytes are
in general already part of the fastmap.
The tests use cyrillic characters as an example. With _LIBC, they pass
without the patch too, but you can make them fail by removing collation
symbols handling.
* posix/Makefile ($(inst_libexecdir)/getconf): Make hard links to
$(inst_bindir)/getconf if possible.
* posix/Makefile ($(objpfx)getconf.speclist): New target.
(generated): Add it.
($(inst_libexecdir)/getconf): Use it.
(tests): Add tst-cpucount.
* posix/sched_cpucount.c: New file.
* posix/tst-cpucount.c: New file.
* posix/Versions: Export __sched_cpucount with version GLIBC_2.6.
(fnmatch): Pass NULL as last argument to internal_fn{,w}match.
* posix/fnmatch_loop.c (struct STRUCT): New type.
(FCT): Add ends argument. If ends != NULL and normal * is
seen in the pattern, store current pattern and string pointers
and return. Adjust recursive calls.
(EXT): Adjust FCT callers.
(STRUCT): Undef at the end of the file.
* posix/Makefile (tests): Add tst-fnmatch2.
* posix/tst-fnmatch2.c: New test.
2007-02-05 Jakub Jelinek <jakub@redhat.com>
[BZ #3957]
* posix/regcomp.c (parse_bracket_exp): Set '\n' bit rather than '\0'
bit for RE_HAT_LISTS_NOT_NEWLINE.
(build_charclass_op): Remove bogus comment.
* posix/Makefile (tests): Add bug-regex27 and bug-regex28.
* posix/bug-regex27.c: New test.
* posix/bug-regex28.c: New test.
2006-06-23 Joseph Myers <joseph@codesourcery.com>
[BZ #2980]
* posix/Makefile (CFLAGS-waitid.c): Add
-fasynchronous-unwind-tables.
2006-08-02 Ulrich Drepper <drepper@redhat.com>
* elf/dl-addr.c (_dl_addr): If GNU-style hash tables are present,
walk them instead of the symbol table.
been converted at all, set *last_wc to WEOF. If mbrtowc failed, set wc
to the byte which couldn't be converted.
(re_string_reconstruct): Don't clear valid_raw_len before calling
re_string_skip_chars. If wc is WEOF after re_string_skip_chars, set
tip_context using re_string_context_at.
* posix/Makefile: Add rules to build and run bug-regex25 test.
* posix/bug-regex25.c: New test.
* sysdeps/unix/get_child_max.c: New file.
* posix/get_child_max.c: New file.
* posix/Makefile (routines): Add it.
* include/sys/sysinfo.h (__get_child_max): Declare it.
* sysdeps/posix/sysconf.c (__sysconf) [! CHILD_MAX]: Use it.
* sysdeps/posix/getaddrinfo.c (fls): New function.
(gaih_inet): Don't use ffs, use fls. Convert address to native byte
order first.
* posix/Makefile (tests): Add tst-rfc3484.
* posix/tst-rfc3484.c: New file.
tst-execlp2, tst-execv1, tst-execv2, tst-execl1, tst-execl2,
tst-execve1, tst-execve2, tst-execle1, and tst-execle2.
* posix/tst-execl1.c: New file.
* posix/tst-execl2.c: New file.
* posix/tst-execle1.c: New file.
* posix/tst-execle2.c: New file.
* posix/tst-execlp1.c: New file.
* posix/tst-execlp2.c: New file.
* posix/tst-execv1.c: New file.
* posix/tst-execv2.c: New file.
* posix/tst-execve1.c: New file.
* posix/tst-execve2.c: New file.
* posix/tst-execvp1.c: New file.
* posix/tst-execvp2.c: New file.
map if requested.
* debug/chk_fail.c: Request backtrace and memory map dump.
* Versions.def: Add GLIBC_2.4 for libc.
* debug/fgets_chk.c: New file.
* debug/fgets_u_chk.c: New file.
* debug/getcwd_chk.c: New file.
* debug/getwd_chk.c: New file.
* debug/readlink_chk.c: New file.
* debug/read_chk.c: New file.
* debug/pread_chk.c: New file.
* debug/pread64_chk.c: New file.
* debug/recv_chk.c: New file.
* debug/recvfrom_chk.c: New file.
* debug/Versions: Add all new functions with version GLIBC_2.4.
* debug/Makefile (routines): Add fgets_chk, fgets_u_chk, read_chk,
pread_chk, pread64_chk, recv_chk, recvfrom_chk, readlink_chk,
getwd_chk, and getcwd_chk. Plus appropriate CFLAGS definitions.
* debug/tst-chk1.c: Add more tests.
* libio/bits/stdio2.h: Add macros for fgets and fgets_unlocked.
* include/stdio.h: Declare __fgets_chk and __fgets_unlocked_chk.
* posix/unistd.h: Include <bits/unistd.h> for fortification.
* posix/bits/unistd.h: New file.
* posix/Makefile (headers): Add bits/unistd.h.
* socket/sys/socket.h: Include <bits/socket2.h> for fortification.
* socket/bits/socket2.h: New file.
* socket/Makefile (headers): Add bits/socket2.h.
* string/bits/string3.h: Extend memset macro to check for zero 3rd
parameter and use __memset_zero_constant_len_parameter in that case.
* sysdeps/generic/memset_chk.c: Add
__memset_zero_constant_len_parameter alias and linker warning.
* debug/Versions: Add __memset_zero_constant_len_parameter to libc
with version GLIBC_2.4.
* sysdeps/generic/bits/types.h: Don't unnecessarily use __extension__
in __STD_TYPE definition.
2005-02-21 Jakub Jelinek <jakub@redhat.com>
* malloc/malloc.c (malloc_printerr): If MALLOC_CHECK_={5,7}, print
the error message rather than program name.
2005-02-21 Ulrich Drepper <drepper@redhat.com>
2005-01-22 Ulrich Drepper <drepper@redhat.com>
* posix/Makefile: Use CFLAGS-*.os instead of CFLAGS-*.c for frame
pointer option.
* stdlib/Makefile (CFLAGS-system.os): Use this instead of
CFLAGS-system.c for frame pointer option.
2005-01-20 Ulrich Drepper <drepper@redhat.com>
* posix/execl.c: Do not allocate potentially large buffers on the
stack.
* posix/execle.c: Likewise.
* posix/execlp.c: Likewise.
* posix/execlp.c: Likewise.
(script_execute): Removed.
(allocate_scripts_argv): New function. Called at most once to
allocate memory, not every time a script is run. Adjust caller.
* sysdeps/generic/wordexp.c (exec_comm): Add a few
TEMP_FAILURE_RETRY. Reorganize code to avoid multiple calls to
exec_comm_child.
(exec_comm_child): Can now be inlined.
* posix/Makefile: Add -fomit-frame-pointer for a few more files.
* stdlib/Makefile: Likewise.
* posix/Makefile (install-others): Add $(inst_libexecdir)/getconf.
(CFLAGS-sysconf.c): Add -D_GETCONF_DIR.
(CFLAGS-getconf.c): New.
($(inst_libexecdir)/getconf): New.
* posix/confstr.c (confstr): Use __sysconf to query specifications
that don't have _POSIX_V6_* macros defined. Use __*_{C,LD}FLAGS
macros defined in bits/environments.h.
* sysdeps/posix/sysconf.c: Include stdlib.h, string.h and
sys/stat.h.
(__sysconf_check_spec): New routine.
(__sysconf): Use it.
* posix/getconf.c (specs): Change into structure array.
(main): If -v is not given, try to get default from
$(libexecdir)/getconf/default. If specification is not
supported by this getconf, try to execute
$(libexecdir)/getconf/$(specification).
* sysdeps/unix/bsd/bsd4.4/freebsd/bits/environments.h: New file.
* sysdeps/unix/sysv/linux/s390/bits/environments.h: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/environments.h: New file.
* sysdeps/unix/sysv/linux/sparc/bits/environments.h: New file.
* sysdeps/unix/sysv/linux/i386/bits/environments.h: New file.
* sysdeps/unix/sysv/linux/x86_64/bits/environments.h: New file.
* sysdeps/generic/bits/environments.h (__ILP32_OFFBIG_CFLAGS):
Define.
2004-11-26 Jakub Jelinek <jakub@redhat.com>
Update.
2004-11-18 Jakub Jelinek <jakub@redhat.com>
[BZ #544]
* posix/regex.h (RE_NO_SUB): New define.
* posix/regex_internal.h (OP_DELETED_SUBEXP): New.
(re_dfa_t): Add subexp_map.
* posix/regcomp.c (struct subexp_optimize): New type.
(optimize_subexps): New routine.
(re_compile_internal): Call it.
(re_compile_pattern): Set preg->no_sub to 1 if RE_NO_SUB.
(free_dfa_content): Free subexp_map.
(calc_inveclosure, calc_eclosure): Skip OP_DELETED_SUBEXP
nodes.
* posix/regexec.c (re_search_internal): If subexp_map
is not NULL, duplicate registers as needed.
* posix/Makefile: Add rules to build and run tst-regex2.
* posix/tst-regex2.c: New test.
* posix/rxspencer/tests: Fix last two tests (\0 -> \1).
Add some new tests for nested subexpressions.
2004-11-12 Ulrich Drepper <drepper@redhat.com>
* posix/Makefile (tests): Add bug-regex24.
* posix/bug-regex24.c: New file.
2004-11-12 Paolo Bonzini <bonzini@gnu.org>
* posix/regexec.c (check_dst_limits_calc_pos_1): Use the map to
cut recursive paths. Make exit condition more precise.
(match_ctx_add_entry): Initialize the map.
* posix/regex_internal.h (struct re_backref_cache_entry): Add a map of
reachable subexpression nodes from each backreference cache entry.
2004-10-27 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/glob.c (globfree): Clear gl_pathv after freeing it.
* posix/Makefile: Add rules to build and run bug-glob2 test.
* posix/bug-glob2.c: New test.
Update.
2004-09-26 Ulrich Drepper <drepper@redhat.com>
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Remove incorrect
requirement on socktype and protocol.
(gaih_inet): If numeric port number is given, return records for all
possible socket types.
* posix/tst-getaddrinfo2.c: New file.
* posix/Makefile (tests): Add tst-getaddrinfo2. [BZ #358]
* nscd/aicache.c: Prefer using gethostbyname3_r NSS callback to also
get ttl and canonical name. Use these two values.
* resolv/Versions: Export _nss_dns_gethostbyname3_r from libnss_dns.
* resolv/nss_dns/dns-host.c (getanswer_r): Take two new parameters.
If nonnull fill with TTL and pointer to canonical name respectively.
(_nss_dns_gethostbyaddr_r): Pass NULL in new parameters of getanswer_r.
(_nss_dns_gethostbyname2_r): Just wrapper around
_nss_dns_gethostbyname3_r.
(_nss_dns_gethostbyname3_r): Renamed from _nss_dns_gethostbyname2_r.
Take two new parameters which as passed to getanswer_r.
2004-02-23 Jakub Jelinek <jakub@redhat.com>
* sysdeps/posix/getaddrinfo.c (gaih_inet): If _res has not been
inited yet, try to init it before saving old _res.options.
* posix/Makefile (xtests): Add bug-ga2.
(generated): Add bug-ga2.mtrace and bug-ga2-mem.
(xtests): Depend on bug-ga2-mem.
($(objpfx)bug-ga2-mem, bug-ga2-ENV): New.
* posix/bug-ga2.c: New test.
2004-01-05 Jakub Jelinek <jakub@redhat.com>
* posix/regcomp.c (regcomp): Fix comment typo.
(regfree): Free preg->translate, clear buffer, allocated, fastmap
and translate fields.
* posix/regcomp.c (build_charclass, buld_charclass_op): Change first
argument to unsigned RE_TRANSLATE_TYPE.
* posix/regex_internal.h (re_string_t): Change trans type to
unsigned RE_TRANSLATE_TYPE.
* posix/regex_internal.c (re_string_construct_common): Cast
trans to unsigned RE_TRANSLATE_TYPE.
(re_string_peek_byte_case, re_string_fetch_byte_case): Avoid fast
path if pstr->trans. Never translate the character through
pstr->trans.
* posix/Makefile (tests): Add bug-regex22.
(bug-regex22-ENV): Set.
* posix/bug-regex22.c: New test.
2003-11-20 Ulrich Drepper <drepper@redhat.com>
* posix/PTESTS: Fix first test in GA143.
2003-11-20 Jakub Jelinek <jakub@redhat.com>
* posix/regex_internal.h (re_dfastate_t): Remove trtable_search.
Add word_trtable.
* posix/regex_internal.c (create_newstate_common, free_state):
Don't free trtable_search.
* posix/regexec.c (check_matching): Remove fl_search argument.
(transit_state_sb): Likewise. #ifdef out as unused.
(build_trtable): Remove fl_search argument. Set state->word_trtable
and state->trtable. Build separate word and non-word tables if
multi-byte and they differ for some character.
(transit_state): Remove fl_search argument. Don't update
state->trtable here. Handle state->word_trtable.
#ifdef out unused call to transit_state_sb.
(re_search_internal): Update check_matching caller.
(group_nodes_into_DFAstates): Don't clear non-ascii chars in accepts
bitmask for multi-byte locales.
* posix/bug-regex19.c (tests): Enable some commented out tests, add
2 new tests.
* posix/tst-rxspencer.c (mb_tests): Don't test [[=b=]] for now as
multi-byte. Don't run identical multi-byte tests multiple times
unnecessarily.
(main): Check setlocale return value.
* posix/Makefile (tst-rxspencer-ARGS): Add --utf8 argument.
(tst-rxspencer-ENV): Remove MALLOC_TRACE, add LOCPATH.
($(objpfx)tst-rxspencer-mem): Run another tst-rxspencer test
here, without --utf8 argument but with MALLOC_TRACE.
2003-11-19 Jakub Jelinek <jakub@redhat.com>
* posix/regexec.c (extend_buffers): Don't allocate
twice as big state_log as needed. Don't modify pstr->valid_len
for mb_cur_max == 1 !icase !trans.
* posix/regcomp.c (free_bin_tree): Removed.
(create_tree): Add dfa argument. Don't call re_malloc for
each tree, instead allocate from str_tree_storage.
(re_dfa_add_tree_node): New function.
(free_dfa_content): Handle freeing if dfa->nodes == NULL
or dfa->state_table == NULL.
(re_compile_internal): Call free_dfa_content if init_dfa
fails. Call free_workarea_compile, re_string_destruct
and free_dfa_content for most of the other failure paths.
(init_dfa): Initialize str_tree_storage_idx.
Don't clear any fields on allocation failure.
(free_workarea_compile): Free str_tree_storage chunks
instead of free_bin_tree (dfa->str_tree).
(parse): Call re_dfa_add_tree_node instead of re_dfa_add_node
followed by create_tree. Add dfa argument to remaining
create_tree calls. Remove new_idx variable. Remove calls
to free_bin_tree.
(parse_reg_exp, parse_branch, parse_expression, parse_sub_exp,
parse_dup_op, parse_bracket_exp, build_charclass_op): Likewise.
(duplicate_tree): Remove calls to free_bin_tree, add dfa
argument to create_tree.
* posix/regex_internal.h (BIN_TREE_STORAGE_SIZE): Define.
(bin_tree_storage_t): New type.
(re_dfa_t): Add str_tree_storage and str_tree_storage_idx
fields.
* posix/Makefile (tests): Add bug-regex21.
(generated): Add bug-regex21-mem, bug-regex21.mtrace,
tst-rxspencer-mem and tst-rxspencer.mtrace.
(tests): Depend on $(objpfx)bug-regex21-mem
and $(objpfx)tst-rxspencer-mem.
(bug-regex21-ENV, tst-rxspencer-ENV): Set.
($(objpfx)bug-regex21-mem, $(objpfx)tst-rxspencer-mem): New.
* posix/tst-rxspencer.c (main): Add call to mtrace.
Free line at the end.
* posix/bug-regex21.c: New test.
* posix/regexec.c (get_subexp): After calling get_subexp_sub
* posix/Makefile: Add rules to build and run tst-rxspencer.
(distribute): Add rxspencer/tests and rxspencer/COPYRIGHT.
* posix/tst-rxspencer.c: New file.
* posix/rxspencer/tests: New file.
* posix/rxspencer/COPYRIGHT: New file.
Patch mostly by Jakub Jelinek.
* posix/regcomp.c (optimize_utf8): New function.
(re_compile_fastmap_iter): Use dfa->mb_cur_max > 1 instead
of !icase.
(re_compile_internal): Call optimize_utf8 if not case insensitive
and in UTF-8 locale.
* posix/regex_internal.h: Ifdef out some prototypes if
RE_NO_INTERNAL_PROTOTYPES is defined to shut up warnings.
* posix/Makefile (tests): Add bug-regex20.
(bug-regex20-ENV): Add LOCPATH.
* posix/bug-regex20.c: New test.
2003-11-12 Jakub Jelinek <jakub@redhat.com>
2003-11-12 Jakub Jelinek <jakub@redhat.com>
* io/ftw.c (NFTW_NEW_NAME, NFTW_OLD_NAME): Add prototypes.
2003-11-12 Jakub Jelinek <jakub@redhat.com>
* posix/tst-regex.c (umemlen): New variable.
(test_expr): Add expectedicase argument. Test case insensitive
searches as well as backwards searches (case sensitive and
insensitive) too.
(run_test): Add icase argument. Use it to compute regcomp flags.
(run_test_backwards): New function.
(main): Cast read to size_t to avoid warning. Set umemlen.
Add expectedicase arguments to test_expr.
* posix/regex_internal.c (re_string_reconstruct): If is_utf8,
find previous character by walking back instead of converting
all chars from beginning.
2003-11-12 Jakub Jelinek <jakub@redhat.com>
* posix/regex_internal.h (struct re_string_t): Add is_utf8
and mb_cur_max fields.
(struct re_dfa_t): Likewise. Reorder fields to make structure
smaller on 64-bit arches.
(re_string_allocate, re_string_construct): Add mb_cur_max and
is_utf8 arguments.
(re_string_char_size_at, re_string_wchar_at): Use pstr->mb_cur_max
instead of MB_CUR_MAX.
* posix/regcomp.c (re_compile_fastmap_iter): Use dfa->mb_cur_max
instead of MB_CUR_MAX.
(re_compile_internal): Pass new arguments to re_string_construct.
(init_dfa): Initialize mb_cur_max and is_utf8 fields.
(peek_token, peek_token_bracket): Use input->mb_cur_max instead
of MB_CUR_MAX.
(parse_expression, parse_bracket_exp, parse_charclass_op): Use
dfa->mb_cur_max instead of MB_CUR_MAX.
* posix/regex_internal.c (re_string_construct_common): Add
mb_cur_max and is_utf8 arguments. Initialize fields with them.
(re_string_allocate, re_string_construct): Add mb_cur_max and
is_utf8 arguments, pass them to re_string_construct_common.
Use mb_cur_max instead of MB_CUR_MAX.
(re_string_realloc_buffers): Use pstr->mb_cur_max instead of
MB_CUR_MAX.
(re_string_reconstruct): Likewise.
(re_string_context_at): Use input->mb_cur_max instead of
MB_CUR_MAX.
(create_ci_newstate, create_cd_newstate): Use dfa->mb_cur_max
instead of MB_CUR_MAX.
* posix/regexec.c (re_search_internal): Likewise.
Pass new arguments to re_string_allocate.
(check_matching, transit_state_sb): Use dfa->mb_cur_max instead of
MB_CUR_MAX.
(extend_buffers): Use pstr->mb_cur_max instead of MB_CUR_MAX.
2003-11-12 Jakub Jelinek <jakub@redhat.com>
* posix/Makefile (tests): Add bug-regex19.
(bug-regex19-ENV): Add LOCPATH.
* posix/bug-regex19.c: New test.
2003-08-15 Ulrich Drepper <drepper@redhat.com>
* io/Versions [GLIBC_2.3.3]: Add posix_fadvise64.
* io/fcntl.h (posix_fadvise64): Change type of third parameter to
off_t.
* sysdeps/unix/sysv/linux/posix_fadvise.c: Adjust definition.
* sysdeps/unix/make-syscalls.sh: Recognize V prefix to the parameter
description indicating the error value is returned, not -1.
* sysdeps/unix/sysv/linux/Makefile [subdir=io] (subdir_routines): Add
posix_fadvise64_64.
* sysdeps/unix/sysv/linux/kernel-features.h: Add definition of
__ASSUME_FADVISE64_64_SYSCALL.
* sysdeps/unix/sysv/linux/syscalls.list: Don't define madvise and
posix_madvise in one file. Have posix_madvise defined with error
value returned.
Define posix_fadvise64_64 entry. Add version info to posix_fadvise64
entry.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Define
posix_fadvise64_64 entry. Add version info to posix_fadvise64 entry.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/posix_fadvise.S: New file.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Define PSEUDO_ERRVAL,
PSEUDO_END_ERRVAL, and ret_ERRVAL.
* sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise.
* posix/Makefile (routines): Add posix_madvise.
* sysdeps/generic/madvise.c: Don't define posix_madvise.
* sysdeps/generic/posix_madvise.c: New file.
* sysdeps/unix/sysv/aix/posix_madvise.c: New file.
2003-06-15 Ulrich Drepper <drepper@redhat.com>
Fix cancellation point handling wrt exception based cleanup.
* io/Makefile: Compile fcntl.c, poll.c, and lockf.c with exceptions.
* misc/Makefile: Compile pselect.c, readv.c, writev.c, and usleep.c
with exceptions.
* posix/Makefile: Compile pread.c, pread64.c, pwrite.c, pwrite64.c,
sleep.c, wait.c, waitid.c, and waitpid.c with exceptions.
* rt/Makefile: Compile aio_suspend.c and clock_nanosleep.c with
exceptions.
* signal/Makefile: Compile sigpause.c, sigsuspend.c, sigtimedwait.c,
sigwait.c, and sigwaitinfo.c with exceptions.
* stdlib/Makefile: Compile system.c with exceptions.
* sysvipc/Makefile: Compile msgrcv.c and msgsnd.c with exceptions.
* termios/Makefile: Compile tcdrain.c with exceptions.
* sysdeps/generic/lockf.c: Add comment explaining the cancellation
situation.
* sysdeps/generic/pselect.c: Likewise.
* sysdeps/posix/sigpause.c: Likewise.
* sysdeps/posix/system.c: Likewise.
* sysdeps/posix/waitid.c: Likewise.
* sysdeps/unix/sysv/linux/sleep.c: Likewise.
* sysdeps/unix/sysv/linux/usleep.c: Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Major rewrite of
INTERNAL_SYSCALL to not use push inside asm statement so that
unwind info is correct around the syscall.
* sysdeps/unix/clock_nanosleep.c: Add cancellation support.
* sysdeps/unix/sysv/linux/clock_nanosleep.c: Likewise.
2003-02-28 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regcomp.c (parse_expression): Deliver translation to
build_word_op, and build_charclass.
(build_charclass): Apply translation for character classes too.
(build_word_op): Deliver translation to build_charclass.
* posux/transbug.c: New file.
* posix/Makefile (tests): Add transbug.
2003-06-04 Paolo Bonzini <bonzini@gnu.org>
* posix/regexec.c (group_nodes_into_DFAstates): Check for
NEXT_ENDBUF_CONSTRAINT. Move check for constraints which do a
'continue' before the others.
* posix/regcomp.c (parse_bracket_exp): If build_charclass fails,
set *err to the returned error, not to REG_ESPACE unconditionally.
(build_word_op): Likewise.
* posix/Makefile (tests): Add bug-regex16.
* posix/bug-regex16.c: New test.
2003-01-16 Jakub Jelinek <jakub@redhat.com>
(free_mem): New function.
* posix/Makefile (tests): Add bug-regex14. Add bug-regex14-mem
if not cross compiling.
(generated): Add bug-regex14-mem and bug-regex14.mtrace.
(bug-regex14-ENV): Set.
(bug-regex14-mem): New target.
* posix/bug-regex14.c: New file.
* elf/Makefile ($(objpfx)librtld.map): Use temporary file for output
target, so we don't touch it when the link fails.
Check for the result overflowing off_t and fail with EOVERFLOW.
* libio/ioftell.c (_IO_ftell): Likewise.
* libio/iofgetpos.c (_IO_new_fgetpos): Likewise.
* login/logwtmp.c (logwtmp): If sizeof ut_tv != sizeof struct timeval,
use a temporary timeval on the stack for gettimeofday and copy it.
* login/logout.c (logout): Likewise.
Reported by Steven Munroe <sjmunroe@us.ibm.com>.
* sysdeps/unix/sysv/linux/bits/statfs.h (struct statfs):
Use __SWORD_TYPE instead of int for member types.
(struct statfs64): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/statfs.h: New file.
* sysdeps/unix/sysv/linux/s390/bits/statfs.h: New file.
* sysdeps/unix/sysv/linux/ia64/bits/statfs.h: File removed.
* sysdeps/unix/sysv/linux/sparc/bits/statfs.h: File removed.
* sysdeps/unix/sysv/linux/x86_64/bits/statfs.h: File removed.
* sysdeps/unix/sysv/linux/sparc/bits/statvfs.h: Moved to ...
* sysdeps/unix/sysv/linux/bits/statvfs.h: ... here.
(ST_NODIRATIME): Restore fixed value of 2048.
* sysdeps/unix/sysv/linux/alpha/bits/statvfs.h: File removed.
* sysdeps/unix/sysv/linux/ia64/bits/statvfs.h: File removed.
Rearranged <bits/types.h> definitions to reduce duplication.
* sysdeps/generic/bits/types.h: Rewritten, using macros from
<bits/wordsize.h> and new header <bits/typesizes.h>.
* posix/Makefile (headers): Add bits/typesizes.h here.
* sysdeps/generic/bits/typesizes.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h: New file.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h: New file.
* sysdeps/mach/hurd/bits/typesizes.h: New file.
* sysdeps/unix/sysv/linux/alpha/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/ia64/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/mips/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/s390/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/sparc/bits/types.h: File removed.
* sysdeps/unix/sysv/linux/x86_64/bits/types.h: File removed.
* posix/sys/types.h [__USE_POSIX199506 || __USE_UNIX98]: Include
<bits/pthreadtypes.h> here, not in <bits/types.h>.
* signal/signal.h: Likewise.
* streams/stropts.h: Include <bits/xtitypes.h>.
* streams/Makefile (headers): Add bits/xtitypes.h here.
* sysdeps/generic/bits/xtitypes.h: New file.
* sysdeps/s390/bits/xtitypes.h: New file.
* sysdeps/ia64/bits/xtitypes.h: New file.
* sysdeps/x86_64/bits/xtitypes.h: New file.
* sysvipc/Makefile (headers): Add bits/ipctypes.h here.
* sysdeps/generic/bits/ipctypes.h: New file.
* sysdeps/mips/bits/ipctypes.h: New file.
* sysdeps/gnu/bits/shm.h: Include <bits/ipctypes.h>.
* sysdeps/gnu/bits/msq.h: Likewise.
* sysvipc/sys/ipc.h: Likewise.
2002-10-22 Roland McGrath <roland@redhat.com>
* sysdeps/generic/libc-tls.c (_dl_tls_static_used): New variable.
* sysdeps/generic/ldsodefs.h (struct rtld_global): New member
`_dl_tls_static_used'.
(TLS_STATIC_MIN): New macro.
* elf/dl-reloc.c [USE_TLS] (allocate_static_tls): New function.
(CHECK_STATIC_TLS): Use it.
2002-09-19 David Mosberger <davidm@hpl.hp.com>
* sysdeps/ia64/dl-fptr.c (make_fdesc): Load address of "local" via
a 64-bit gp-relative address to enable binaries with large data
sections.
2002-09-30 Ulrich Drepper <drepper@redhat.com>
* stdlib/cxa_finalize.c (__cxa_finalize): Call UNREGISTER_ATFORK
if it is defined.
* posix/Makefile (distribute): Add fork.h.
* sysdeps/generic/fork.h: New file.
* posix/bug-regex11.c (tests): Add flags field.
(main): Avoid warnings. Use test[i].flags. Return nonzero
if any of the tests failed.
* posix/bug-regex12.c: New file.
* posix/Makefile (tests): Add bug-regex12.
2002-08-11 Philip Blundell <philb@gnu.org>
* sysdeps/arm/Makefile: New file.
2002-08-08 Jakub Jelinek <jakub@redhat.com>
* posix/regcomp.c (parse_reg_exp): If '|' is immediately followed
by another '|', end of regex or enclosing ')', clear branch.
* posix/bug-regex9.c: New test.
* posix/Makefile (tests): Add bug-regex9.
2002-05-24 Robert Love <rml@tech9.net>
* posix/Makefile (routines): Add sched_getaffinity and
sched_setaffinity.
* posix/sched.h: Add declarations for sched_getaffinity and
sched_setaffinity.
* sysdeps/generic/sched_getaffinity.c: New file.
* sysdeps/generic/sched_setaffinity.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Add sched_getaffinity and
sched_setaffinity.
2002-08-06 Andreas Schwab <schwab@suse.de>
* sysdeps/unix/utime.c: If TIMES is NULL pass it through to utimes.
* posix/fnmatch_loop.c: Fix computation of alignment.
2001-08-09 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regex.c (wcs_regex_compile): Use appropriate string
to compare with collating element.
Fix the padding for the alignment.
2001-08-09 Isamu Hasegawa <isamu@yamato.ibm.com>
* locale/programs/ld-collate.c (collate_output): Exclude
characters from elem_table.
Reduce if clause to write collating elements correctly.
* posix/Makefile (tests): Add bug-regex5.
* posix/bug-regex5.c: New file.
2001-08-09 Ulrich Drepper <drepper@redhat.com>
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
* posix/Makefile: Add rules to build and run tst-regex.
2001-06-20 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regex.c (FREE_WCS_BUFFERS): New macro to free buffers.
(re_search_2): invoke convert_mbs_to_wcs and FREE_WCS_BUFFERS.
(wcs_re_match_2_internal): Check whether the wcs buffers need
seting up or not, and skip seting up routin if not needed.
2001-06-26 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regex.c (count_mbs_length): Use binary search for
optimization.
2001-06-27 Ulrich Drepper <drepper@redhat.com>
2001-05-14 Andreas Jaeger <aj@suse.de>
* sysdeps/i386/fpu/libm-test-ulps: Adjust for new tests.
* math/libm-test.inc (tanh_test): Add testcases for last tanh bug.
2001-05-14 Stephen L Moshier <moshier@mediaone.net>
* sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Fix sign test.
2001-05-11 Jakub Jelinek <jakub@redhat.com>
* posix/regex.c (re_match_2_internal): Swap mbs_offset and csize
as well if swapping strings.
Make sure stop is not past end of second string.
* posix/bug-regex4.c: New test.
* posix/Makefile (tests): Add bug-regex4.
2001-05-10 Andreas Jaeger <aj@suse.de>
* manual/install.texi (Linux): Clarify that Linux 2.2 is minimal
requirement.
2001-02-12 Andreas Jaeger <aj@suse.de>
* posix/Makefile (tests): Don't run bug-regex2 when
cross-compiling.
* libio/Makefile (tests): Don't run test-freopen when
cross-compiling.
* manual/stdio.texi (Streams and I18N): Fix typos.
* stdlib/Makefile (tests): Don't run tst-fmtmsg when
cross-compiling.
($(objpfx)tst-fmtmsg.out): Pass run-program-prefix.
* stdlib/tst-fmtmsg.sh (test): Use run_program_prefix for static
only builds.
* elf/Makefile (tests): Only run tst-pathopt with shared libs.
* posix/Makefile: Add rules to build and run bug-regex2.
2001-02-10 Jakub Jelinek <jakub@redhat.com>
* posix/regex.c (convert_mbs_to_wcs): Change is_binary to char *.
(regex_compile): Likewise.
(FREE_VARIABLES): Don't free is_binary1 and is_binary2.
(re_match_2_internal): Use just is_binary instead of two variables.
Use REGEX_TALLOC to allocate it and FREE_VAR to free on failure.
2001-02-09 Ulrich Drepper <drepper@redhat.com>
2000-11-09 Ulrich Drepper <drepper@redhat.com>
* version.h (VERSION): Bump to 2.2.
(RELEASE): Set to stable.
* posix/Makefile (tst-dir-ARGS): Fix problem with compiling in
source directory.
2000-09-06 Ulrich Drepper <drepper@redhat.com>
* posix/getopt.c (_getopt_internal): Don't recognize an option
name as ambiguous if it's a prefix for more than one name but the
other struct option values are identical.
* posix/tstgetopt.c: Add test for improved ambiguity recognition.
Don't depend on visual inspection of the output file to recognize
errors.
* posix/Makefile (tstgetopt-ARGS): Add a few more parameters.
2000-08-29 Ulrich Drepper <drepper@redhat.com>
* inet/rcmd.c (__checkhost_sa): If getnameinfo succeeds but the
names don't match don't return.
Patch by Olaf Kirch <okir@flash.lst.de>.
