AuroraMiddleware/glibc
1
0
Fork 0
mirror of https://sourceware.org/git/glibc.git synced 2024-11-10 07:10:06 +00:00
Code Issues Packages Projects Releases Wiki Activity
32,697 Commits 334 Branches 1,646 Tags 275 MiB
f58e5f4809
Commit Graph

31 Commits

Author SHA1 Message Date
Gabriel F. T. Gomes
18a336772d Prepare the manual to display math errors for float128 functions 
When float128 support gets enabled for powerpc64le, the ULP errors for
float128 functions need to be presented in the manual.  This patch adds
support for displaying them.

Tested for powerpc64le and s390x.

	* manual/libm-err-tab.pl (@all_floats, %suffices, parse_ulps):
	Enable generation of float128 entries on the error table.
 2017-06-23 10:31:09 -03:00
Joseph Myers
2b7dc4c868 Do not hardcode list of libm functions in libm-err-tab.pl. 
manual/libm-err-tab.pl contains a hardcoded list of libm functions for
which ulps are listed in the manual, and another hardcoded list in a
comment of functions deliberately excluded because of an expected lack
of ulps (and the two together are not in fact an exhaustive list of
libm functions tested through the libm-test machinery).

This patch removes these hardcoded lists, so eliminating this from the
places needing updating when a new libm function is added.  Instead,
ulps are tabulated for functions for which they are seen in
libm-test-ulps files, in alphabetical order.  The pseudo-function
names such as *_downward and *_vlen* are excluded since they are
excluded from the existing lists, and the description in the manual is
updated to explain how those entries are excluded and if a function is
not listed at all it does not have known errors.

Tested for x86_64.

	* manual/libm-err-tab.pl (@all_functions): Change to
	%all_functions.  Initialize as empty.
	(parse_ulps): Add to %all_functions based on functions found in
	ulps files.  Ignore results for non-default rounding modes and
	vector functions.
	(print_platforms): Use %all_platforms.
	* manual/math.texi (Errors in Math Functions): Document omissions
	from the table.
 2017-02-06 17:55:59 +00:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
423c2b9d08 Add fromfp functions. 
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised.  This patch implements these functions for glibc.

These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures.  A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types.  For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.

As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.

The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.

The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results.  Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped.  The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future.  I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.

For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized.  Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected.  The patch initializes the variable to avoid those
errors.

With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fromfp): New declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/math.h: Include <bits/types.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
	constant and macro.
	(FP_INT_DOWNWARD): Likewise.
	(FP_INT_TOWARDZERO): Likewise.
	(FP_INT_TONEARESTFROMZERO): Likewise.
	(FP_INT_TONEAREST): Likewise.
	* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
	(fromfpf): Likewise.
	(fromfpl): Likewise.
	(ufromfp): Likewise.
	(ufromfpf): Likewise.
	(ufromfpl): Likewise.
	(fromfpx): Likewise.
	(fromfpxf): Likewise.
	(fromfpxl): Likewise.
	(ufromfpx): Likewise.
	(ufromfpxf): Likewise.
	(ufromfpxl): Likewise.
	* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
	s_fromfpxF and s_ufromfpxF.
	* math/gen-fromfp-tests.py: New file.
	* math/gen-fromfp-tests-inputs: Likewise.
	* math/libm-test.inc: Include <stdint.h>
	(check_intmax_t): New function.
	(check_uintmax_t): Likewise.
	(struct test_fiu_M_data): New type.
	(struct test_fiu_U_data): Likewise.
	(RUN_TEST_fiu_M): New macro.
	(RUN_TEST_LOOP_fiu_M): Likewise.
	(RUN_TEST_fiu_U): Likewise.
	(RUN_TEST_LOOP_fiu_U): Likewise.
	(fromfp_test_data): New array.
	(fromfp_test): New function.
	(fromfpx_test_data): New array.
	(fromfpx_test): New function.
	(ufromfp_test_data): New array.
	(ufromfp_test): New function.
	(ufromfpx_test_data): New array.
	(ufromfpx_test): New function.
	(main): Call fromfp_test, fromfpx_test, ufromfp_test and
	ufromfpx_test.
	* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
	characters.
	* math/test-tgmath-ret.c: Include <stdint.h>.
	(rm): New variable.
	(width): Likewise.
	(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
	called function.
	(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
	CHECK_RET_CONST_TYPE.
	(CHECK_RET_CONST_DOUBLE): Likewise.
	(CHECK_RET_CONST_LDOUBLE): Likewise.
	(CHECK_RET_CONST): Take extra arguments and pass them to calls
	macros.
	(fromfp): New CHECK_RET_CONST call.
	(ufromfp): Likewise.
	(fromfpx): Likewise.
	(ufromfpx): Likewise.
	(do_test): Call check_return_fromfp, check_return_ufromfp,
	check_return_fromfpx and check_return_ufromfpx.
	* math/test-tgmath.c: Include <stdint.h>
	(NCALLS): Increase to 138.
	(F(compile_test)): Initialize i.  Call fromfp functions.
	(F(fromfp)): New function.
	(F(fromfpx)): Likewise.
	(F(ufromfp)): Likewise.
	(F(ufromfpx)): Likewise.
	* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
	FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
	FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
	ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
	ufromfpxl.
	* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
	ufromfp and ufromfpx.
	* math/fromfp.h: New file.
	* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
	ufromfp, fromfpx and ufromfpx.
	(CFLAGS-nldbl-fromfp.c): New variable.
	(CFLAGS-nldbl-fromfpx.c): Likewise.
	(CFLAGS-nldbl-ufromfp.c): Likewise.
	(CFLAGS-nldbl-ufromfpx.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-31 00:40:59 +00:00
Joseph Myers
41c67149b9 Add roundeven, roundevenf, roundevenl. 
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero).  As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs.  There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.

This patch implements these functions for glibc.  The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case).  It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired.  (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(roundeven): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
	macro.
	* math/Versions (roundeven): New libm symbol at version
	GLIBC_2.25.
	(roundevenf): Likewise.
	(roundevenl): Likewise.
	* math/Makefile (libm-calls): Add s_roundevenF.
	* math/libm-test.inc (roundeven_test_data): New array.
	(roundeven_test): New function.
	(main): Call roundeven_test.
	* math/test-tgmath.c (NCALLS): Increase to 134.
	(F(compile_test)): Call roundeven.
	(F(roundeven)): New function.
	* manual/arith.texi (Rounding Functions): Document roundeven,
	roundevenf and roundevenl.
	* manual/libm-err-tab.pl (@all_functions): Add roundeven.
	* include/math.h (roundeven): Use libm_hidden_proto.
	* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
	* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	roundeven.
	(CFLAGS-nldbl-roundeven.c): New variable.
	* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-21 01:48:27 +00:00
Joseph Myers
525f803984 Add fmaxmag, fminmag functions. 
TS 18661-1 defines fmaxmag and fminmag functions that return the
argument with maximum / minimum magnitude (acting like fmax / fmin if
the arguments have the same magnitude or either argument is a NaN).
These correspond to the IEEE 754-2008 operations maxNumMag and
minNumMag.  This patch implements these functions for glibc.  They are
implemented with type-generic templates.  Tests are based on those for
fmax and fmin.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fmaxmag): New declaration.
	(fminmag): Likewise.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New
	macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise.
	* math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25.
	(fmaxmagf): Likewise.
	(fmaxmagl): Likewise.
	(fminmag): Likewise.
	(fminmagf): Likewise.
	(fminmagl): Likewise.
	* math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF.
	* math/s_fmaxmag_template.c: New file.
	* math/s_fminmag_template.c: Likewise.
	* math/libm-test.inc (fmaxmag_test_data): New array.
	(fmaxmag_test): New function.
	(fminmag_test_data): New array.
	(fminmag_test): New function.
	(main): Call fmaxmag_test and fminmag_test.
	* math/test-tgmath.c (NCALLS): Increase to 132.
	(F(compile_test)): Call fmaxmag and fminmag.
	(F(fminmag)): New function.
	(F(fmaxmag)): Likewise.
	* manual/arith.texi (Misc FP Arithmetic): Document fminmag,
	fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl.
	* manual/libm-err-tab.pl (@all_functions): Add fmaxmag and
	fminmag.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag
	and fminmag.
	(CFLAGS-nldbl-fmaxmag.c): New variable.
	(CFLAGS-nldbl-fminmag.c): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-20 00:46:53 +00:00
Joseph Myers
55a38f8236 Add llogb, llogbf, llogbl. 
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int.  Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.

This patch implements these functions and macros for glibc.  llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations.  Tests are also
based on those for ilogb.

Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>).  The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros).  So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
	New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
	macro.
	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
	New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
	* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
	(llogbf): Likewise.
	(llogbl): Likewise.
	* math/Makefile (gen-libm-calls): Add w_llogbF.
	(tests): Add test-fp-llogb-constants.
	* math/w_llogb_template.c: New file.  Based on
	math/w_ilogb_template.c.
	* math/libm-test.inc (llogb_test_data): New array.
	(llogb_test): New function.
	(main): Call llogb_test.
	* math/test-fp-llogb-constants.c: New file.  Based on
	math/test-fp-ilogb-constants.c.
	* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
	(do_test): Call check_return_llogb.
	* math/test-tgmath.c (NCALLS): Increase to 126.
	(F(compile_test)): Call llogb.
	(F(llogb)): New function.
	* manual/math.texi (Exponents and Logarithms): Document llogb,
	llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
	* manual/libm-err-tab.pl (@all_functions): Add llogb.
	* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
	(CFLAGS-nldbl-llogb.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-02 01:42:49 +00:00
Joseph Myers
457663a7cd Add setpayloadsig, setpayloadsigf, setpayloadsigl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.

The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.

Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayloadsig): New declaration.
	* math/Versions (setpayloadsig): New libm symbol at version
	GLIBC_2.25.
	(setpayloadsigf): Likewise.
	(setpayloadsigl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadsigF.
	* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
	(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
	(setpayloadsig_test_data): New array.
	(setpayloadsig_test): New function.
	(main): Call setpayloadsig_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
	setpayloadsigf and setpayloadsigl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayloadsig.
	(CFLAGS-nldbl-setpayloadsig.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-24 23:56:48 +00:00
Joseph Myers
eb3c12c784 Add setpayload, setpayloadf, setpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid.  The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.

The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month).  This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayload): New declaration.
	* math/Versions (setpayload): New libm symbol at version
	GLIBC_2.25.
	(setpayloadf): Likewise.
	(setpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadF.
	* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
	test_Ff_b1_data.
	(RUN_TEST_Ff_b1): New macro.
	(RUN_TEST_LOOP_Ff_b1): Likewise.
	(canonicalize_test_data): Update type.
	(setpayload_test_data): New array.
	(setpayload_test): New function.
	(main): Call setpayload_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayload,
	setpayloadf and setpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
	Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayload.
	(CFLAGS-nldbl-setpayload.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-19 00:16:28 +00:00
Joseph Myers
799131036e Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139). 
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual).  This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.

This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file.  The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.

Tested for x86_64.

	[BZ #14139]
	* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
	(find_files): Obtain platform name from libm-test-ulps-name and
	store in %pplatforms.
	(canonicalize_platform): Remove.
	(print_platforms): Use $pplatforms directly.
	(by_platforms): Do not allow for platforms missing from
	%pplatforms.
	* sysdeps/aarch64/libm-test-ulps-name: New file.
	* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/arm/libm-test-ulps-name: Likewise.
	* sysdeps/generic/libm-test-ulps-name: Likewise.
	* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
	* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/microblaze/libm-test-ulps-name: Likewise.
	* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
	* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
	* sysdeps/nios2/libm-test-ulps-name: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/sh/libm-test-ulps-name: Likewise.
	* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/tile/libm-test-ulps-name: Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
 2016-11-04 16:49:06 +00:00
Joseph Myers
eaf5ad0bc4 Add canonicalize, canonicalizef, canonicalizel. 
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation.  This patch implements
these functions for glibc.

As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations.  However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value).  Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations.  Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.

The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format.  Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".

libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them).  As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0.  (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)

The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(canonicalize): New declaration.
	* math/Versions (canonicalize): New libm symbol at version
	GLIBC_2.25.
	(canonicalizef): Likewise.
	(canonicalizel): Likewise.
	* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
	* math/s_canonicalize_template.c: New file.
	* math/libm-test.inc: Update comment on functions tested and
	testing of NaN payloads.
	(TEST_NAN_PAYLOAD): New macro.
	(NO_TEST_INLINE): Update value.
	(XFAIL_TEST): Likewise.
	(ERRNO_UNCHANGED): Likewise.
	(ERRNO_EDOM): Likewise.
	(ERRNO_ERANGE): Likewise.
	(IGNORE_RESULT): Likewise.
	(NON_FINITE): Likewise.
	(TEST_SNAN): Likewise.
	(NO_TEST_MATHVEC): Likewise.
	(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
	(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
	(struct test_Ffp_b1_data): New type.
	(RUN_TEST_Ffp_b1): New macro.
	(RUN_TEST_LOOP_Ffp_b1): Likewise.
	(canonicalize_test_data): New array.
	(canonicalize_test): New function.
	(main): Call canonicalize_test.
	* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
	canonicalizef and canonicalizel.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	canonicalize.
	(CFLAGS-nldbl-canonicalize.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
	to ...
	* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
	... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
	test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
	Use libm_hidden_def.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
	* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
	test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
	* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
	libm_hidden_def.
	* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
	macro.
	* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
	(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-26 23:14:31 +00:00
Joseph Myers
f8e8b8ed9f Add getpayload, getpayloadf, getpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type.  The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless.  A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(getpayload): New declaration.
	* math/Versions (getpayload): New libm symbol at version
	GLIBC_2.25.
	(getpayloadf): Likewise.
	(getpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_getpayloadF.
	* math/libm-test.inc: Include <nan-high-order-bit.h>.
	(struct test_f_f_data): Add comment.
	(RUN_TEST_fp_f): New macro.
	(RUN_TEST_LOOP_fp_f): Likewise.
	(getpayload_test_data): New array.
	(getpayload_test): New function.
	(main): Call getpayload_test.
	* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
	descriptor.
	* manual/arith.texi (FP Bit Twiddling): Document getpayload,
	getpayloadf and getpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-19 01:49:09 +00:00
Joseph Myers
cc6a8d7457 Add totalordermag, totalordermagf, totalordermagl. 
In addition to the totalorder functions, TS 18661-1 defines
totalordermag functions, which do the same comparison but on the
absolute values of the arguments.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
In general the implementations are similar to but simpler than those
for the totalorder functions.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalordermag): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag):
	New macro.
	* math/Versions (totalordermag): New libm symbol at version
	GLIBC_2.25.
	(totalordermagf): Likewise.
	(totalordermagl): Likewise.
	* math/Makefile (libm-calls): Add s_totalordermagF.
	* math/libm-test.inc (totalordermag_test_data): New array.
	(totalordermag_test): New function.
	(main): Call totalordermag_test.
	* math/test-tgmath.c (NCALLS): Increase to 125.
	(F(compile_test)): Call totalordermag.
	(F(totalordermag)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalordermag, totalordermagf and totalordermagl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalordermag.
	(CFLAGS-nldbl-totalordermag.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
	(do_test): Also test totalordermagl.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
	Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-15 00:36:48 +00:00
Joseph Myers
5e9d98a3d9 Add totalorder, totalorderf, totalorderl. 
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)

The description of the totalOrder operation is complicated.  However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation.  For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations.  (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.)  So the
complications are:

* When MIPS quiet NaN conventions are in use, the representation of
  NaNs needs adjusting before making such an integer comparison.  This
  patch does this adjustment only when both arguments are NaNs, as
  there's no need for it if only one is a NaN, and as long as both are
  NaNs you can just flip the relevant bits without any problems from
  this turning a NaN into an infinity.

* For the m68k version of ldbl-96, where the high mantissa bit is
  "don't care" for infinities and NaNs, representations where it
  differs must compare the same.  Note: although the testcase for this
  compiles, I have not actually tested on m68k.

* For ldbl-128ibm, the low part must be ignored when the high part is
  NaN, and low parts of +0 and -0 must be considered the same whatever
  the high part.

The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs.  Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalorder): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
	New macro.
	* math/Versions (totalorder): New libm symbol at version
	GLIBC_2.25.
	(totalorderf): Likewise.
	(totalorderl): Likewise.
	* math/Makefile (libm-calls): Add s_totalorderF.
	* math/gen-libm-test.pl (parse_args): Escape quotes in test name
	string.
	* math/libm-test.inc (PAYLOAD_DIG): New macro.
	(qnan_value_pl): Likewise.
	(snan_value_pl): Likewise.
	(qnan_value): Define using qnan_value_pl.
	(snan_value): Define using snan_value_pl.
	(struct test_ff_i_data): Add comment about which tests use this
	structure.
	(RUN_TEST_ff_b): New macro.
	(RUN_TEST_LOOP_ff_b): Likewise.
	(totalorder_test_data): New array.
	(totalorder_test): New function.
	(main): Call totalorder_test.
	* math/test-tgmath.c (NCALLS): Increase to 122.
	(F(compile_test)): Call totalorder.
	(F(totalorder)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalorder, totalorderf and totalorderl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalorder.
	(CFLAGS-nldbl-totalorder.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
	Add test-totalorderl-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
	* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
	test-totalorderl-ldbl-96.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-12 01:20:30 +00:00
Joseph Myers
1e7c8fcca5 Add iseqsig. 
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>.
This macro is like the == operator except that unordered operands
result in the "invalid" exception and errno being set to EDOM.

This patch implements this macro for glibc.  Given the need to set
errno, this is implemented with out-of-line functions __iseqsigf,
__iseqsig and __iseqsigl (of which the last only exists at all if long
double is ABI-distinct from double, so no function aliases or compat
support are needed).  The present patch ignores excess precision
issues; I intend to deal with those in a followup patch.  (Like
comparison operators, type-generic comparison macros should *not*
convert operands to their semantic types but should preserve excess
range and precision, meaning that for some argument types and values
of FLT_EVAL_METHOD, an underlying function should be called for a
wider type than that of the arguments.)

The underlying functions are implemented with the type-generic
template machinery.  Comparing x <= y && x >= y is sufficient in ISO C
to achieve an equality comparison with "invalid" raised for unordered
operands (and the results of those two comparisons can also be used to
tell whether errno needs to be set).  However, some architectures have
GCC bugs meaning that unordered comparison instructions are used
instead of ordered ones.  Thus, a mechanism is provided for
architectures to use an explicit call to feraiseexcept to raise
exceptions if required.  If your architecture has such a bug you
should add a fix-fp-int-compare-invalid.h header for it, with a
comment pointing to the relevant GCC bug report; if such a GCC bug is
fixed, that header's contents should have a __GNUC_PREREQ conditional
added so that the workaround can eventually be removed for that
architecture.

Tested for x86_64, x86, mips64, arm and powerpc.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New
	macro.
	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(__iseqsig): New declaration.
	* math/s_iseqsig_template.c: New file.
	* math/Versions (__iseqsigf): New libm symbol at version
	GLIBC_2.25.
	(__iseqsig): Likewise.
	(__iseqsigl): Likewise.
	* math/libm-test.inc (iseqsig_test_data): New array.
	(iseqsig_test): New function.
	(main): Call iseqsig_test.
	* math/Makefile (gen-libm-calls): Add s_iseqsigF.
	* manual/arith.texi (FP Comparison Functions): Document iseqsig.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/generic/fix-fp-int-compare-invalid.h: New file.
	* sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise.
	* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-06 22:19:38 +00:00
Joseph Myers
29cb929332 Add iscanonical. 
TS 18661-1 adds an iscanonical classification macro to <math.h>.

The motivation for this is decimal floating-point, where some values
have both canonical and noncanonical encodings.  For IEEE binary
interchange formats, all encodings are canonical.  For x86/m68k
ldbl-96, and for ldbl-128ibm, there are encodings that do not
represent any valid value of the type; although formally iscanonical
does not need to handle trap representations (and so could just always
return 1), it seems useful, and in line with the description in the TS
of "representations that are extraneous to the floating-point model"
as being non-canonical (as well as "redundant representations of some
or all of its values"), for it to detect those representations and
return 0 for them.

This patch adds iscanonical to glibc.  It goes in a header
<bits/iscanonical.h>, included under appropriate conditions in
<math.h>.  The default header version just evaluates the argument
(converted to its semantic type, though current GCC will probably
discard that conversion and any exceptions resulting from it) and
returns 1.  ldbl-96 and ldbl-128ibm then have versions of the header
that call a function __iscanonicall for long double (the sizeof-based
tests will of course need updating for float128 support, like other
such type-generic macro implementations).  The ldbl-96 version of
__iscanonicall has appropriate conditionals to reflect the differences
in the m68k version of that format (where the high mantissa bit may be
either 0 or 1 when the exponent is 0 or 0x7fff).  Corresponding tests
for those formats are added as well.  Other architectures do not have
any new functions added because just returning 1 is correct for all
their floating-point formats.

Tested for x86_64, x86, mips64 (to test the default macro version) and
powerpc.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include
	<bits/iscanonical.h>.
	* bits/iscanonical.h: New file.
	* math/s_iscanonicall.c: Likewise.
	* math/Versions (__iscanonicall): New libm symbol at version
	GLIBC_2.25.
	* math/libm-test.inc (iscanonical_test_data): New array.
	(iscanonical_test): New function.
	(main): Call iscanonical_test.
	* math/Makefile (headers): Add bits/iscanonical.h.
	(type-ldouble-routines): Add s_iscanonicall.
	* manual/arith.texi (Floating Point Classes): Document
	iscanonical.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c:
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
	test-iscanonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise.
	* sysdeps/ieee754/ldbl-96/Makefile: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-09-30 00:27:50 +00:00
Joseph Myers
bb8081f57f Add iszero. 
TS 18661-1 adds an iszero classification macro to <math.h>.  This
patch implements it for glibc.  There are no new underlying functions
in libm because the implementation uses fpclassify when sNaN support
is required and a direct comparison otherwise; any optimizations for
this macro should be done through adding __builtin_iszero in GCC and
using it in the header for suitable GCC versions, not through adding
other optimized inline or out-of-line versions to glibc.

Tested for x86_64 and x86.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New
	macro.
	* math/libm-test.inc (iszero_test_data): New array.
	(iszero_test): New function.
	(main): Call iszero_test.
	* manual/arith.texi (Floating Point Classes): Document iszero.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
 2016-09-23 21:54:21 +00:00
Joseph Myers
d942e95cd7 Add issubnormal. 
TS 18661-1 adds an issubnormal classification macro to <math.h>.  This
patch implements it for glibc.  There are no new underlying functions
in libm because the implementation uses fpclassify; any optimizations
for this macro should be done through adding __builtin_subnormal in
GCC and using it in the header for suitable GCC versions, not through
adding other optimized inline or out-of-line versions to glibc.

The intended structure of the NEWS entry for <math.h> features from TS
18661-1 is like:

* New <math.h> features are added from TS 18661-1:2014:

  - Nearest integer functions: roundeven, roundevenf, roundevenl.

  - Comparison macros: iseqsig.

  - Classification macros: iscanonical, issubnormal, iszero.

(that is, following the grouping of interfaces in TS 18661-1:2014,
with any group where any interfaces are new in glibc 2.25 being listed
like that).

Tested for x86_64 and x86.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New
	macro.
	* math/libm-test.inc (issubnormal_test_data): New array.
	(issubnormal_test): New function.
	* manual/arith.texi (Floating Point Classes): Document
	issubnormal.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
 2016-09-21 20:52:02 +00:00
Rajalakshmi Srinivasaraghavan
41a359e22f Add nextup and nextdown math functions 
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it.  This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.

The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity.  These are currently enabled
as GNU extensions.
 2016-06-16 21:37:45 +05:30
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Joseph Myers
e6b6a85705 Don't include individual test ulps in libm-test-ulps. 
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy.  Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.

Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded.  Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).

	* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
	individual tests in comment.
	(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
	(prev_max_error): New variable.
	(prev_real_max_error): Likewise.
	(prev_imag_max_error): Likewise.
	(compare_ulp_data): Don't refer to test names in comment.
	(find_test_ulps): Remove function.
	(find_function_ulps): Likewise.
	(find_complex_function_ulps): Likewise.
	(init_max_error): Take function name as argument.  Look up ulps
	for that function.
	(print_ulps): Remove function.
	(print_max_error): Use prev_max_error instead of calling
	find_function_ulps.
	(print_complex_max_error): Use prev_real_max_error and
	prev_imag_max_error instead of calling find_complex_function_ulps.
	(check_float_internal): Take max_ulp parameter instead of calling
	find_test_ulps.  Don't call print_ulps.
	(check_float): Update call to check_float_internal.
	(check_complex): Update calls to check_float_internal.
	(START): Pass argument to init_max_error.
	* math/gen-libm-test.pl (%results): Don't include "kind"
	information.
	(parse_ulps): Don't handle ulps of individual tests.
	(print_ulps_file): Likewise.
	(output_ulps): Likewise.
	* math/README.libm-test: Update.
	* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
	individual tests.
	* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
	* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
	* sysdeps/arm/libm-test-ulps: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps: Likewise.
	* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
	* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
	* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
	* sysdeps/microblaze/libm-test-ulps: Likewise.
	* sysdeps/mips/mips32/libm-test-ulps: Likewise.
	* sysdeps/mips/mips64/libm-test-ulps: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
	* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps: Likewise.
	* sysdeps/sh/libm-test-ulps: Likewise.
	* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
	* sysdeps/tile/libm-test-ulps: Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.

	* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
 2014-03-05 15:02:38 +00:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Joseph Myers
9c84384cc1 Remove trailing whitespace. 2013-06-05 20:44:03 +00:00
Thomas Schwinge
572676160d New <math.h> macro named issignaling to check for a signaling NaN (sNaN). 
It is based on draft TS 18661 and currently enabled as a GNU extension.
 2013-04-02 13:51:02 +02:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Andreas Jaeger
41713d4e8c * manual/libc-texinfo.sh: Add entry about free manuals. 
* manual/contrib.texi (Contributors): Fix cross reference.

	* manual/libc.texinfo (Copying): Include freemanuals.

	* manual/Makefile (appendices): Add freemanuals.

	* manual/freemanuals.texi: New file.
	Patch by Brian Youmans <3diff@gnu.org>.

	* manual/libm-err-tab.pl: Pretty print more platforms, print a
	smaller table.

	* manual/math.texi (Errors in Math Functions): Fix grammar, start
	table on separate page.
	Patch by Brian Youmans <3diff@gnu.org>.
 2001-08-28 08:05:41 +00:00
Andreas Jaeger
41bdb6e20c Update to LGPL v2.1. 
2001-07-06  Paul Eggert  <eggert@twinsun.com>

	* manual/argp.texi: Remove ignored LGPL copyright notice; it's
	not appropriate for documentation anyway.
	* manual/libc-texinfo.sh: "Library General Public License" ->
	"Lesser General Public License".

2001-07-06  Andreas Jaeger  <aj@suse.de>

	* All files under GPL/LGPL version 2: Place under LGPL version
	2.1.
 2001-07-06 04:58:11 +00:00
Andreas Jaeger
6a7a8b22f6 Update. 
2001-06-05  Andreas Jaeger  <aj@suse.de>

	* manual/libm-err-tab.pl (parse_ulps): Fix typo.

2001-06-04  H.J. Lu  <hjl@gnu.org>

	* sysdeps/alpha/elf/start.S: Add .type for the entry point.
	* sysdeps/arm/elf/start.S: Likewise.
	* sysdeps/hppa/elf/start.S: Likewise.
	* sysdeps/i386/elf/start.S: Likewise.
	* sysdeps/m68k/elf/start.S: Likewise.
	* sysdeps/mips/elf/start.S: Likewise.
	* sysdeps/ia64/elf/start.S: Likewise.
	* sysdeps/sh/elf/start.S: Likewise.
	* sysdeps/s390/s390-32/elf/start.S: Likewise.
	* sysdeps/s390/s390-64/elf/start.S: Likewise.
	* sysdeps/cris/elf/start.S: Likewise.

2001-06-04  Bruce Mitchener  <bruce@cubik.org>

	* manual/resource.texi: Correct setpriority/nice documentation.

	* sysdeps/unix/nice.c: Correct nice() implementation.
 2001-06-05 06:21:21 +00:00
Ulrich Drepper
aaa1276ee3 Update. 
* manual/math.texi (Errors in Math Functions): New section.
	* math/libm-err-tab.pl: Moved to...
	* manual/libm-err-tab.pl: ...here.
	* manual/Makefile: Add rules for math function error table generation.
 1999-10-30 06:56:10 +00:00