And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
V2 of this patch fixes an issue in V1, where the state was changed to ON not
OFF at end of _mcleanup. I hadn't noticed that (counterintuitively) ON=0 and
OFF=3, hence zeroing the buffer turned it back on. So set the state to OFF
after the memset.
1. Prevent double free, and reads from unallocated memory, when
_mcleanup is (incorrectly) called two or more times in a row,
without an intervening call to __monstartup; with this patch, the
second and subsequent calls effectively become no-ops instead.
While setting tos=NULL is minimal fix, safest action is to zero the
whole gmonparam buffer.
2. Prevent memory leak when __monstartup is (incorrectly) called two
or more times in a row, without an intervening call to _mcleanup;
with this patch, the second and subsequent calls effectively become
no-ops instead.
3. After _mcleanup, treat __moncontrol(1) as __moncontrol(0) instead.
With zeroing of gmonparam buffer in _mcleanup, this stops the
state incorrectly being changed to GMON_PROF_ON despite profiling
actually being off. If we'd just done the minimal fix to _mcleanup
of setting tos=NULL, there is risk of far worse memory corruption:
kcount would point to deallocated memory, and the __profil syscall
would make the kernel write profiling data into that memory,
which could have since been reallocated to something unrelated.
4. Ensure __moncontrol(0) still turns off profiling even in error
state. Otherwise, if mcount overflows and sets state to
GMON_PROF_ERROR, when _mcleanup calls __moncontrol(0), the __profil
syscall to disable profiling will not be invoked. _mcleanup will
free the buffer, but the kernel will still be writing profiling
data into it, potentially corrupted arbitrary memory.
Also adds a test case for (1). Issues (2)-(4) are not feasible to test.
Signed-off-by: Simon Kissane <skissane@gmail.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
When mcount overflows, no gmon.out file is generated, but no message is printed
to the user, leaving the user with no idea why, and thinking maybe there is
some bug - which is how BZ 27576 ended up being logged. Print a message to
stderr in this case so the user knows what is going on.
As a comment in sys/gmon.h acknowledges, the hardcoded MAXARCS value is too
small for some large applications, including the test case in that BZ. Rather
than increase it, add tunables to enable MINARCS and MAXARCS to be overridden
at runtime (glibc.gmon.minarcs and glibc.gmon.maxarcs). So if a user gets the
mcount overflow error, they can try increasing maxarcs (they might need to
increase minarcs too if the heuristic is wrong in their case.)
Note setting minarcs/maxarcs too large can cause monstartup to fail with an
out of memory error. If you set them large enough, it can cause an integer
overflow in calculating the buffer size. I haven't done anything to defend
against that - it would not generally be a security vulnerability, since these
tunables will be ignored in suid/sgid programs (due to the SXID_ERASE default),
and if you can set GLIBC_TUNABLES in the environment of a process, you can take
it over anyway (LD_PRELOAD, LD_LIBRARY_PATH, etc). I thought about modifying
the code of monstartup to defend against integer overflows, but doing so is
complicated, and I realise the existing code is susceptible to them even prior
to this change (e.g. try passing a pathologically large highpc argument to
monstartup), so I decided just to leave that possibility in-place.
Add a test case which demonstrates mcount overflow and the tunables.
Document the new tunables in the manual.
Signed-off-by: Simon Kissane <skissane@gmail.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
The `__monstartup()` allocates a buffer used to store all the data
accumulated by the monitor.
The size of this buffer depends on the size of the internal structures
used and the address range for which the monitor is activated, as well
as on the maximum density of call instructions and/or callable functions
that could be potentially on a segment of executable code.
In particular a hash table of arcs is placed at the end of this buffer.
The size of this hash table is calculated in bytes as
p->fromssize = p->textsize / HASHFRACTION;
but actually should be
p->fromssize = ROUNDUP(p->textsize / HASHFRACTION, sizeof(*p->froms));
This results in writing beyond the end of the allocated buffer when an
added arc corresponds to a call near from the end of the monitored
address range, since `_mcount()` check the incoming caller address for
monitored range but not the intermediate result hash-like index that
uses to write into the table.
It should be noted that when the results are output to `gmon.out`, the
table is read to the last element calculated from the allocated size in
bytes, so the arcs stored outside the buffer boundary did not fall into
`gprof` for analysis. Thus this "feature" help me to found this bug
during working with https://sourceware.org/bugzilla/show_bug.cgi?id=29438
Just in case, I will explicitly note that the problem breaks the
`make test t=gmon/tst-gmon-dso` added for Bug 29438.
There, the arc of the `f3()` call disappears from the output, since in
the DSO case, the call to `f3` is located close to the end of the
monitored range.
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Another minor error seems a related typo in the calculation of
`kcountsize`, but since kcounts are smaller than froms, this is
actually to align the p->froms data.
Co-authored-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The Z modifier is a nonstandard synonymn for z (that predates z
itself) and compiler might issue an warning for in invalid
conversion specifier.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Glibc assumes that ENTRY_POINT is the lowest address for which we need
to keep profiling records and BFD linker uses a linker script to place
the input sections.
Starting from GCC 4.6, the main function is placed in .text.startup
section and starting from binutils 2.22, BFD linker with
commit add44f8d5c5c05e08b11e033127a744d61c26aee
Author: Alan Modra <amodra@gmail.com>
Date: Thu Nov 25 03:03:02 2010 +0000
* scripttempl/elf.sc: Group .text.exit, text.startup and .text.hot
sections.
places .text.startup section before .text section, which leave the main
function out of profiling records.
Starting from binutils 2.15, linker provides __executable_start to mark
the lowest address of the executable. Use __executable_start as the
lowest address to keep the main function in profiling records. This fixes
[BZ #28153].
Tested on Linux/x86-64, Linux/x32 and Linux/i686 as well as with
build-many-glibcs.py.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
As indicated by Joseph's comment on BZ#17726, this symbol is most
likely a historical ABI accident. This patch make it on both arm
and sparc ABIs a compat_symbol.
Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn
sparc64-linux-gnu to see if the symbol is still present.
* gmon/Versions (libc) [GLIBC_2.31]: New entry.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter):
Make a compat_symbol.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h
(__profil_counter_global): Likewise.
After
commit 9d7a3741c9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Dec 15 16:59:33 2017 -0800
Add --enable-static-pie configure option to build static PIE [BZ #19574]
and
commit 00c714df39
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Dec 18 12:24:26 2017 -0800
Pass -no-pie to GCC only if GCC defaults to PIE [BZ #22614]
$(no-pie-ldflag) is no longer effective since no-pie-ldflag is defined
to -no-pie only if GCC defaults to PIE. When --enable-static-pie is
used to configure glibc build and GCC doesn't default to PIE. no-pie-ldflag
is undefined and these tests:
elf/Makefile:LDFLAGS-tst-dlopen-aout = $(no-pie-ldflag)
elf/Makefile:LDFLAGS-tst-prelink = $(no-pie-ldflag)
elf/Makefile:LDFLAGS-tst-main1 = $(no-pie-ldflag)
gmon/Makefile:LDFLAGS-tst-gmon := $(no-pie-ldflag)
may fail to link. This patch replaces "-pie" with
$(if $($(@F)-no-pie),$(no-pie-ldflag),-pie)
and repleces
LDFLAGS-* = $(no-pie-ldflag)
with
tst-*-no-pie = yes
so that tst-dlopen-aout, tst-prelink, tst-main1 and tst-gmon are always
built as non-PIE, with and without --enable-static-pie, regardless if
GCC defaults to PIE or non-PIE.
Tested with build-many-glibcs.py without --enable-static-pie as well as
with --enable-static-pie for x86_64, x32 and i686.
[BZ #22630]
* Makeconfig (link-pie-before-libc): Replace -pie with
$(if $($(@F)-no-pie),$(no-pie-ldflag),-pie).
* elf/Makefile (LDFLAGS-tst-dlopen-aout): Removed.
(tst-dlopen-aout-no-pie): New.
(LDFLAGS-tst-prelink): Removed.
(tst-prelink-no-pie): New.
(LDFLAGS-tst-main1): Removed.
(tst-main1-no-pie): New.
* gmon/Makefile (LDFLAGS-tst-gmon): Removed.
(tst-gmon-no-pie): New.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
The function, main, is added to profiling output of static executable
which must link against gcrt1.o.
* Makeconfig (+link-static-before-libc): Use the first of
$(CRT-$(@F)) and $(csu-objpfx)$(static-start-installed-name).
* gmon/Makefile (tests): Add tst-gmon-static.
(tests-static): Likewise.
(CFLAGS-tst-gmon-static.c): New.
(CRT-tst-gmon-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Likewise.
(tst-gmon-static-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static.out): Likewise.
(clean-tst-gmon-static-data): Likewise.
($(objpfx)tst-gmon-static-gprof.out): Likewise.
* gmon/tst-gmon-static-gprof.sh: New file.
* gmon/tst-gmon-static.c: Likewise.
Since PIE can be loaded at any address, we need to subtract load address
from PCs.
[BZ #22284]
* gmon/Makefile [$(have-fpie)$(build-shared) == yesyes] (tests,
tests-pie): Add tst-gmon-pie.
(CFLAGS-tst-gmon-pie.c): New.
(CRT-tst-gmon-pie): Likewise.
(tst-gmon-pie-ENV): Likewise.
[$(have-fpie)$(build-shared) == yesyes] (tests-special): Likewise.
($(objpfx)tst-gmon-pie.out): Likewise.
(clean-tst-gmon-pie-data): Likewise.
($(objpfx)tst-gmon-pie-gprof.out): Likewise.
* gmon/gmon.c [PIC]: Include <link.h>.
[PIC] (callback): New function.
(write_hist): Add an argument for load address. Subtract load
address from PCs.
(write_call_graph): Likewise.
(write_gmon): Call __dl_iterate_phdr to get load address, pass
it to write_hist and write_call_graph.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If glibc is built with -fomit-frame-pointer to undo the effect of
configuring GCC with --enable-frame-pointer, using -pg by itself results
in a build failure:
gcc: error: -pg and -fomit-frame-pointer are incompatible
Hide internal __moncontrol function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* mon/gmon.c (__moncontrol): Add libc_hidden_proto and
libc_hidden_def.
This patch consolidates all the non cancellable writev calls to use
the __writev_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* gmon/gmon.c (write_hist): Replace writev_not_cancel_no_status with
__writev_nocancel_nostatus.
(write_call_graph): Likewise.
(write_bb_counts): Likewise.
* resolv/herror.c (herror): Likewise.
* sysdeps/generic/not-cancel.h (writev_not_cancel_no_status): Remove
macro.
(__writev_nocancel_nostatus): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (writev_not_cancel_no_status):
Remove macro.
(__writev_nocancel_nostatus): New function.
__bb_init_func and __bb_exit_func have been removed from GCC 3.3 in
2002 by
https://gcc.gnu.org/ml/gcc-patches/2002-09/msg00499.html
which also recommended that they should also be removed from glibc. These
functions exist only in libc.a and are used for gcov from versions of GCC
older than GCC 3.3.
[BZ #21974]
* gmon/Makefile (routines): Remove bb_init_func and
bb_exit_func.
(elide-routines.os): Removed.
* include/sys/gmon.h (__bb): Likewise.
(__bb_init_func): Likewise.
(__bb_exit_func): Likewise.
This patch consolidates all the non cancellable write calls to use
the __write_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (write_not_cancel): Remove macro.
(__write_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (__write_nocancel):
Rewrite as a function prototype.
(write_not_cancel): Remove macro.
* sysdeps/unix/sysv/linux/write.c (__write_nocancel): New function.
* gmon/gmon.c (ERR): Replace write_not_cancel with __write_nocancel.
(write_gmon): Likewise.
* libio/fileops.c (_IO_new_file_write): Likewise.
* login/utmp_file.c (pututline_file): Likewise.
(updwtmp_file): Likewise.
* stdio-common/psiginfo.c (psiginfo): Likewise.
* sysdeps/posix/spawni.c (__spawni_child): Likewise.
* sysdeps/unix/sysv/linux/gethostid.c (sethostid): Likewise.
* sysdeps/unix/sysv/linux/libc_fatal.c (backtrace_and_maps):
Likewise.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np):
Likewise.
The types u_char, u_short, u_int, u_long, ushort, uint, ulong, u_int8_t,
u_int16_t, u_int32_t, u_int64_t, quad_t, and u_quad_t are BSDisms that
have never been standardized. While glibc should continue to *provide*
these types for compatibility's sake, its public headers should not
use them.
The meat of this change was mechanically generated by the following
shell command:
perl -pi~ -e '
s/\b(__)?u_char\b/unsigned char/g;
s/\b(__)?u_?short\b/unsigned short/g;
s/\b(__)?u_?int\b/unsigned int/g;
s/\b(__)?u_?long\b/unsigned long/g;
s/\b(__)?u_int8_t\b/uint8_t/g;
s/\b(__)?u_int16_t\b/uint16_t/g;
s/\b(__)?u_int32_t\b/uint32_t/g;
s/\b(__)?u_int64_t\b/uint64_t/g;
s/\b(__)?u_quad_t\b/uint64_t/g;
s/\b(__)?quad_t\b/uint64_t/g;
' $(grep -lE -e '\<((__)?(quad_t|u(short|int|long|_(char|short|int([0-9]+_t)?|long|quad_t))))\>' \
$(grep -LE '\<(_(SYS|BITS)_TYPES_H|rpc/(rpc|rpc_msg|types|xdr)\.h)\>' \
$(find . \( -false $(sed 's/^/-o -name /' all-installed-headers) \
\) -printf '%P\n' | sort -u)))
where 'all-installed-headers' was a list of the basenames of all installed
header files, manually extracted from the Makefiles. Non-installed
wrapper headers in include/ are also adjusted, for consistency.
I then manually fixed up indentation and line-wrapping.
sys/types.h and bits/types.h are excluded because they must continue
to define the u_* types (under __USE_MISC) for compatibility with
applications. They do not use these types themselves.
All headers that (transitively) include rpc/types.h are also excluded,
for three reasons. First, the u_* types are defined by rpc/types.h,
unconditionally (not just under __USE_MISC) so they are logically part
of the SunRPC API. Second, many of those headers appear to be
machine-generated. Third, it's my understanding that we are getting
rid of as much of SunRPC as possible in the near future.
(The one file under sunrpc/ that's touched, sunrpc/rpc/rpc_des.h, does
*not* include rpc/types.h. This may itself be a bug.)
After changing from u_intNN_t to uintNN_t, a number of headers now
need to include stdint.h to pick up those types. It might be more
hygenic, namespace-wise, to use __uintNN_t instead, but none of these
headers are bound by ISO or POSIX to do so, and it's unlikely that
anyone using them will be bothered. (The two files that were using
__-prefixed versions of the u_types, sysdeps/mach/hurd/net/route.h and
sysdeps/unix/sysv/linux/net/route.h, both already also contained uses of
the unprefixed versions.)
Some of these files directly included features.h and/or sys/cdefs.h,
which I removed, as the style generally seems to be to let sys/types.h
do that for us. (This does not change the set of definitions exposed
by any header; sys/types.h unconditionally includes both features.h
and sys/cdefs.h.)
One file included asm/types.h unnecessarily.
* bits/in.h, gmon/sys/gmon.h, inet/netinet/igmp.h
* inet/protocols/routed.h, inet/protocols/talkd.h
* inet/protocols/timed.h, io/fts.h, nptl_db/thread_db.h
* resolv/arpa/nameser.h, resolv/resolv.h, sunrpc/rpc/rpc_des.h
* sysdeps/generic/netinet/if_ether.h
* sysdeps/generic/netinet/in_systm.h
* sysdeps/generic/netinet/ip.h, sysdeps/generic/netinet/tcp.h
* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
* sysdeps/gnu/netinet/udp.h, sysdeps/mach/hurd/net/ethernet.h
* sysdeps/mach/hurd/net/if_arp.h
* sysdeps/mach/hurd/net/if_ppp.h
* sysdeps/mach/hurd/net/route.h, sysdeps/mach/sys/reboot.h
* sysdeps/unix/sysv/linux/bits/in.h
* sysdeps/unix/sysv/linux/net/ethernet.h
* sysdeps/unix/sysv/linux/net/if_arp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_shaper.h
* sysdeps/unix/sysv/linux/net/route.h
* sysdeps/unix/sysv/linux/netinet/if_ether.h
* sysdeps/unix/sysv/linux/netinet/if_fddi.h
* sysdeps/unix/sysv/linux/netinet/if_tr.h
* sysdeps/unix/sysv/linux/netipx/ipx.h
* sysdeps/unix/sysv/linux/sys/acct.h
* include/arpa/nameser.h, include/resolv.h:
Change all uses of u_char to unsigned char,
u_short and ushort to unsigned short, u_int and uint to unsigned int,
u_long and ulong to unsigned long, u_int8_t to uint8_t,
u_int16_t to uint16_t, u_int32_t to uint32_t, quad_t to int64_t,
and u_int64_t and u_quad_t to uint64_t.
* mach/sys/reboot.h: Remove two casts of integer literals
to the types they already have.
* bits/in.h: Correct error in description of IP_MULTICAST_LOOP.
* sysdeps/unix/sysv/linux/bits/in.h: Likewise.
* sysdeps/unix/sysv/linux/netinet/if_ether.h: Change a comment
from referring to 'unsigned char' to 'uint8_t' for consistency with
the macro definition below.
* gmon/sys/gmon.h, inet/netinet/igmp.h, inet/protocols/talkd.h
* io/fts.h, resolv/arpa/nameser.h, resolv/resolv.h
* sunrpc/rpc/rpc_des.h, sysdeps/generic/netinet/ip.h
* sysdeps/gnu/netinet/tcp.h, sysdeps/gnu/netinet/udp.h
* sysdeps/mach/hurd/net/if_ppp.h, sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/sys/acct.h
* include/arpa/nameser.h, include/resolv.h:
Fix indentation disrupted by mechanical edits.
* inet/protocols/talkd.h, resolv/arpa/nameser.h
* sysdeps/generic/netinet/in_systm.h
* sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h
* sysdeps/gnu/netinet/udp.h
* sysdeps/unix/sysv/linux/net/ethernet.h
* sysdeps/unix/sysv/linux/net/if_arp.h
* sysdeps/unix/sysv/linux/net/if_ppp.h
* sysdeps/unix/sysv/linux/net/if_shaper.h
* sysdeps/unix/sysv/linux/netinet/if_fddi.h
* sysdeps/unix/sysv/linux/netinet/if_tr.h
* sysdeps/unix/sysv/linux/netipx/ipx.h
* sysdeps/unix/sysv/linux/sys/acct.h
Include stdint.h for uintNN_t definitions.
Don't include sys/cdefs.h, features.h, or asm/types.h directly.
No need to compile x86_64 _mcount.S with -pg. We can just copy the
normal static object.
* gmon/Makefile (noprof): Add $(sysdep_noprof).
* sysdeps/x86_64/Makefile (sysdep_noprof): Add _mcount.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
