This restore the 2.33 semantic for arena_get2. It was changed by
11a02b035b to avoid arena_get2 call malloc (back when __get_nproc
was refactored to use an scratch_buffer - 903bc7dcc2). The
__get_nproc was refactored over then and now it also avoid to call
malloc.
The 11a02b035b did not take in consideration any performance
implication, which should have been discussed properly. The
__get_nprocs_sched is still used as a fallback mechanism if procfs
and sysfs is not acessible.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux 5.17 added support to naming anonymous virtual memory areas
through the prctl syscall. The __set_vma_name is a wrapper to avoid
optimizing the prctl call if the kernel does not support it.
If the kernel does not support PR_SET_VMA_ANON_NAME, prctl returns
EINVAL. And it also returns the same error for an invalid argument.
Since it is an internal-only API, it assumes well-formatted input:
aligned START, with (START, START+LEN) being a valid memory range,
and NAME with a limit of 80 characters without an invalid one
("\\`$[]").
Reviewed-by: DJ Delorie <dj@redhat.com>
This allows to include bits/syslog-decl.h in include/sys/syslog.h and
therefore be able to create the libc_hidden_builtin_proto (__syslog_chk)
prototype.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The __fdelt_chk declaration needs to be available so that
libc_hidden_proto can be used while not redefining __FD_ELT.
Thus, misc/bits/select-decl.h is created to hold the corresponding
prototypes.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The __REDIRECT* macros are creating aliases which may lead to unwanted
PLT entries when fortification is enabled.
To prevent these entries, the REDIRECT alias should be set to point to the
existing __GI_* aliases.
This is done transparently by creating a __REDIRECT_FORTIFY* version of
these macros, that can be overwritten internally when necessary.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
Non-at functions can be implemented by just calling the corresponding at
function with AT_FDCWD and zero at_flags.
In the linkat case, the at behavior is different (O_NOLINK), so this introduces
__linkat_common to pass O_NOLINK as appropriate.
lstat functions can also be implemented with fstatat by adding
__fstatat64_common which takes a flags parameter in addition to the at_flags
parameter,
In the end this factorizes chmod, chown, link, lstat64, mkdir, readlink,
rename, stat64, symlink, unlink, utimes.
This also makes __lstat, __lxstat64, __stat and __xstat64 directly use
__fstatat64_common instead of __lstat64 or __stat64.
By adding an internal alias to avoid the GOT indirection.
On some architecture, __libc_single_thread may be accessed through
copy relocations and thus it requires to update also the copies
default copy.
This is done by adding a new internal macro,
libc_hidden_data_{proto,def}, which has an addition argument that
specifies the alias name (instead of default __GI_ one).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
The timestamps created by __convert_scm_timestamps only make sense for
64 bit time_t programs, 32 bit time_t programs will ignore 64 bit time_t
timestamps since SO_TIMESTAMP will be defined to old values (either by
glibc or kernel headers).
Worse, if the buffer is not suffice MSG_CTRUNC is set to indicate it
(which breaks some programs [1]).
This patch makes only 64 bit time_t recvmsg and recvmmsg to call
__convert_scm_timestamps. Also, the assumption to called it is changed
from __ASSUME_TIME64_SYSCALLS to __TIMESIZE != 64 since the setsockopt
might be called by libraries built without __TIME_BITS=64. The
MSG_CTRUNC is only set for the 64 bit symbols, it should happen only
if 64 bit time_t programs run older kernels.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/systemd/systemd/pull/20567
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
This is an internal function meant to return the number of avaliable
processor where the process can scheduled, different than the
__get_nprocs which returns a the system available online CPU.
The Linux implementation currently only calls __get_nprocs(), which
in tuns calls sched_getaffinity.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This macro definition enforces two arguments even with newer compilers
that accept the single-argument form, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
It also fixes an issue on 32-bit select call for !__ASSUME_PSELECT
(microblase with older kernels only) where the expected timeout
is a 'struct timeval' instead of 'struct timespec'.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The getdate is basically a wrapper localtime and mktime. The 64-bit
time support is done calling the 64-bit internal functions, there is
no need to add a new symbol version.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The recvmsg handling is more complicated because it requires check the
returned kernel control message and make some convertions. For
!__ASSUME_TIME64_SYSCALLS it converts the first 32-bit time SO_TIMESTAMP
or SO_TIMESTAMPNS and appends it to the control buffer if has extra
space or returns MSG_CTRUNC otherwise. The 32-bit time field is kept
as-is.
Calls with __TIMESIZE=32 will see the converted 64-bit time control
messages as spurious control message of unknown type. Calls with
__TIMESIZE=64 running on pre-time64 kernels will see the original
message as a spurious control ones of unknown typ while running on
kernel with native 64-bit time support will only see the time64 version
of the control message.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
There is no need to handle ENOSYS on fstatfs64 call, required only
for alpha (where is already fallbacks to fstatfs).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The __NR_fstatfs64 syscall is supported on all architectures but
aarch64, mips64, riscv64, and x86_64. And newer ABIs also uses
the new fstatfs64 interface (where the struct size is used as
first argument).
So the default implementation now uses:
1. __NR_fstatfs64 for non-LFS call and handle overflow directly
There is no need to handle __NR_fstatfs since all architectures
that only support are LFS only.
2. __NR_fstatfs if defined or __NR_fstatfs64 otherwise for LFS
call.
Alpha is the only outlier, it is a 64-bit architecture which
provides non-LFS interface and only provides __NR_fstatfs64 on
newer kernels (5.1+).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add __nonnull((2)) to the setrlimit()/getrlimit() function declaration
to avoid null pointer access.
-----
v2
According to the suggestions of the Adhemerval Zanella and Zack Weinberg:
use __nonnull() to check null pointers in the compilation phase.
do not add pointer check code to setrlimit()/getrlimit().
The validity of the "resource" parameter is checked in the syscall.
v1
https://public-inbox.org/libc-alpha/20201230114131.47589-1-nixiaoming@huawei.com/
-----
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
We need NO_RTLD_HIDDEN because of the need for PLT calls in ld.so.
See Roland's comment in
https://sourceware.org/bugzilla/show_bug.cgi?id=15605
"in the Hurd it's crucial that calls like __mmap be the libc ones
instead of the rtld-local ones after the bootstrap phase, when the
dynamic linker is being used for dlopen and the like."
We used to just avoid all hidden use in the rtld ; this commit switches to
keeping only those that should use PLT calls, i.e. essentially those defined in
sysdeps/mach/hurd/dl-sysdep.c:
__assert_fail
__assert_perror_fail
__*stat64
_exit
This fixes a few startup issues, notably the call to __tunable_get_val that is
made before PLTs are set up.
The explicit error return value (without in-band signaling) avoids
complicated steps to detect errors based on whether errno has been
updated.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
It basically calls the 64-bit __clock_gettime64 and adds the overflow
check.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
I couldn't pinpoint which standard has added it, but no other POSIX
system supports it and/or no longer provide it. The 'struct vtimes'
also has a lot of drawbacks due its limited internal type size.
I couldn't also see find any project that actually uses this symbol,
either in some dignostic way (such as sanitizer). So I think it should
be safer to just move to compat symbol, instead of deprecated. The
idea it to avoid new ports to export such broken interface (riscv32
for instance).
Checked on x86_64-linux-gnu and i686-linux-gnu.
It basically calls the 64-bit time_t wait4 internal symbol.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It was made deprecated on 2.31, so it moves to compat symbol after
two releases. It was also removed from exported symbol for riscv32
(since ABI will be supported on for 2.33).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It also decouple mknod{at} from xmknod{at}. The riscv32 ABI was added
on 2.33, so it is safe to remove the old __xmknot{at} symbols and just
provide the newer mknod{at} ones.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
A new struct __stat{64}_t64 type is added with the required
__timespec64 time definition. Only LFS is added, 64-bit time with
32-bit offsets is not supposed to be supported (no existing glibc
configuration supports such a combination). It is done with an extra
__NR_statx call plus a conversion to the new __stat{64}_t64 type.
The statx call is done only for 32-bit time_t ABIs.
Internally some extra routines to copy from/to struct stat{64}
to struct __stat{64} used on multiple implementations (stat, fstat,
lstat, and fstatat) are added on a extra implementation
(stat_t64_cp.c). Alse some extra routines to copy from statx to
__stat{64} is added on statx_cp.c.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It implements all the required syscall for the all Linux kABIS on
fstatat{64} instead of calling fxstatat{64}.
On non-LFS implementation, it handles 3 cases:
1. New kABIs which uses generic pre 64-bit time Linux ABI (csky and
nios): it issues __NR_fstat64 plus handle the overflow on st_ino,
st_size, or st_blocks.
2. Old KABIs with old non-LFS support (arm, i386, hppa, m68k,
microblaze, mips32, s390, sh, powerpc, and sparc32): it issues
__NR_fstatat64 and convert the result to struct stat.
3. 64-bit kABI outliers (mips64 and mips64-n32): it issues
__NR_newfstatat and convert the result to struct stat.
The generic LFS implementation handles multiple cases:
1. XSTAT_IS_XSTAT64 being 1:
1.1. 64-bit kABI (aarch64, ia64, powerpc64*, s390x, riscv64, and
x86_64): it issues __NR_newfstatat.
1.2. 64-bit kABI outlier (alpha): it issues __NR_fstatat64.
1.3. 64-bit kABI outlier where struct stat64 does not match kernel
one (sparc64): it issues __NR_fstatat64 and convert the result
to struct stat64.
1.4. 32-bit kABI with default 64-bit time_t (arc, riscv32): it
issues __NR_statx and convert the result to struct stat64.
2. Old ABIs with XSTAT_IS_XSTAT64 being 0:
2.1. All kABIs with non-LFS support (arm, csky, i386, hppa, m68k,
microblaze, nios2, sh, powerpc32, and sparc32): it issues
__NR_fstatat64.
2.2. 64-bit kABI outliers (mips64 and mips64-n32): it issues
__NR_newfstatat and convert the result to struct stat64.
It allows to remove all the hidden definitions from the {f,l}xstat{64}
(some are still kept because Hurd requires it).
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This patch removes the mknod and mknodat static wrapper and add the
symbols on the libc with the expected names.
Both the prototypes of the internal symbol linked by the static
wrappers and the inline redirectors are also removed from the installed
sys/stat.h header file. The wrapper implementation license LGPL
exception is also removed since it is no longer statically linked to
binaries.
Internally the _STAT_VER* definitions are moved to the arch-specific
xstatver.h file.
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This patch removes the stat, stat64, lstat, lstat64, fstat, fstat64,
fstatat, and fstatat64 static wrapper and add the symbol on the libc
with the expected names.
Both the prototypes of the internal symbol linked by the static
wrappers and the inline redirectors are also removed from the installed
sys/stat.h header file. The wrapper implementation license LGPL
exception is also removed since it is no longer statically linked to
binaries.
Internally the _STAT_VER* definitions are moved to a arch-specific
xstatver.h file. The internal defines that redirects internals
{f}stat{at} to their {f}xstat{at} counterparts are removed for Linux
(!NO_RTLD_HIDDEN). Hurd still requires them since {f}stat{at} pulls
extra objects that makes the loader build fail otherwise (I haven't
dig into why exactly).
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The wire-up syscall __NR_recvmmsg_time64 (for 32-bit) or
__NR_recvmmsg (for 64-bit) is used as default. The 32-bit fallback
is used iff __ASSUME_TIME64_SYSCALLS is not defined, which assumes the
kernel ABI provides either __NR_socketcall or __NR_recvmmsg
(32-bit time_t).
It does not handle the timestamps on ancillary data (SCM_TIMESTAMPING
records).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The syscall __NR_pselect6_time64 (32-bit) or __NR_pselect6 (64-bit)
is used as default. For architectures with __ASSUME_TIME64_SYSCALLS
the 32-bit fallback uses __NR_select/__NR__newselect or __NR_pselect6
(it should cover the microblaze case where older kernels do not
provide __NR_pselect6).
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The syscall __NR_pselect6_time64 (32-bit) or __NR_pselect6 (64-bit)
is used as default. For architectures with __ASSUME_TIME64_SYSCALLS
the 32-bit fallback uses __NR_pselec6.
To accomodate microblaze missing pselect6 support on kernel older
than 3.15 the fallback is moved to its own function to the microblaze
specific implementation can override it.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
To provide a y2038 safe interface a new symbol __shmctl64 is added
and __shmctl is change to call it instead (it adds some extra buffer
copying for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_shmid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386,
mips, powerpc32, and sparc32) require specific implementations
due to their kernel ABI.
2. shmid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit shmctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes shmid_ds already contains
64-bit time_t fields and will result in just the __shmctl symbol
using the __shmctl64 code. The shmid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low time handling.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support
using of the 64-bit one.
The default 32-bit symbol will allocate and copy the shmid_ds
over multiple buffers, but this should be deprecated in favor
of the __shmctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To provide a y2038 safe interface a new symbol __msgctl64 is added
and __msgctl is change to call it instead (it adds some extra buffer
coping for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_msqid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386, mips,
powerpc32, and sparc32) require specific implementations due to
their kernel ABI.
2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit msgctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes msqid_ds already contains
64-bit time_t fields and will result in just the __msgctl symbol
using the __msgctl64 code. The msgid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low time handling.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support using
the 64-bit time_t.
The default 32-bit symbol will allocate and copy the msqid_ds
over multiple buffers, but this should be deprecated in favor
of the __msgctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Different than others 64-bit time_t syscalls, the SysIPC interface
does not provide a new set of syscall for y2038 safeness. Instead it
uses unused fields in semid_ds structure to return the high bits for
the timestamps.
To provide a y2038 safe interface a new symbol __semctl64 is added
and __semctl is change to call it instead (it adds some extra buffer
copying for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_semid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386,
mips, powerpc32, sparc32) require specific implementations due
their kernel ABI.
2. semid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit semctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes semid_ds already contains
64-bit time_t fields and will result in just the __semctl symbol
using the __semctl64 code. The semid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low handling.
It might be possible to optimize it further to avoid the
kernel_semid64_ds to semun transformation if the exported ABI
for the architectures matches the expected kernel ABI, but the
implementation is already complex enough and don't think this
should be a hotspot in any case.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support
using the 64-bit one.
The default 32-bit symbol will allocate and copy the semid_ds
over multiple buffers, but this should be deprecated in favor
of the __semctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch provides new __adjtime64 explicit 64 bit function for adjusting
Linux kernel clock.
Internally, the __clock_adjtime64 syscall is used instead of __adjtimex. This
patch is necessary for having architectures with __WORDSIZE == 32 Y2038 safe.
Moreover, a 32 bit version - __adjtime has been refactored to internally use
__adjtime64.
The __adjtime is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversions between struct
timeval and 64 bit struct __timeval64.
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Above tests were performed with Y2038 redirection applied as well as without to
test the proper usage of both __adjtime64 and __adjtime.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a C wrapper to pass arguments in
/* Control process execution. */
extern int prctl (int __option, ...) __THROW;
to prctl syscall:
extern int prctl (int, unsigned long int, unsigned long int,
unsigned long int, unsigned long int);
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
