This commit add support for the new AVX10 cpu features:
https://cdrdv2-public.intel.com/784267/355989-intel-avx10-spec.pdf
We add checks for:
- `AVX10`: Check if AVX10 is present.
- `AVX10_{X,Y,Z}MM`: Check if a given vec class has AVX10 support.
`make check` passes and cpuid output was checked against GNR/DMR on an
emulator.
Different systems prefer a different divisors.
From benchmarks[1] so far the following divisors have been found:
ICX : 2
SKX : 2
BWD : 8
For Intel, we are generalizing that BWD and older prefers 8 as a
divisor, and SKL and newer prefers 2. This number can be further tuned
as benchmarks are run.
[1]: https://github.com/goldsteinn/memcpy-nt-benchmarks
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch should have no affect on existing functionality.
The current code, which has a single switch for model detection and
setting prefered features, is difficult to follow/extend. The cases
use magic numbers and many microarchitectures are missing. This makes
it difficult to reason about what is implemented so far and/or
how/where to add support for new features.
This patch splits the model detection and preference setting stages so
that CPU preferences can be set based on a complete list of available
microarchitectures, rather than based on model magic numbers.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Crossing 2GB boundaries with indirect calls and jumps can use more
branch prediction resources on Intel Golden Cove CPU (see the
"Misprediction for Branches >2GB" section in Intel 64 and IA-32
Architectures Optimization Reference Manual.) There is visible
performance improvement on workloads with many PLT calls when executable
and shared libraries are mmapped below 2GB. Add the Prefer_MAP_32BIT_EXEC
bit so that mmap will try to map executable or denywrite pages in shared
libraries with MAP_32BIT first.
NB: Prefer_MAP_32BIT_EXEC reduces bits available for address space
layout randomization (ASLR), which is always disabled for SUID programs
and can only be enabled by the tunable, glibc.cpu.prefer_map_32bit_exec,
or the environment variable, LD_PREFER_MAP_32BIT_EXEC. This works only
between shared libraries or between shared libraries and executables with
addresses below 2GB. PIEs are usually loaded at a random address above
4GB by the kernel.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
Remove Prefer_AVX2_STRCMP to enable EVEX strcmp. When comparing 2 32-byte
strings, EVEX strcmp has been improved to require 1 load, 1 VPTESTM, 1
VPCMP, 1 KMOVD and 1 INCL instead of 2 loads, 3 VPCMPs, 2 KORDs, 1 KMOVD
and 1 TESTL while AVX2 strcmp requires 1 load, 2 VPCMPEQs, 1 VPMINU, 1
VPMOVMSKB and 1 TESTL. EVEX strcmp is now faster than AVX2 strcmp by up
to 40% on Tiger Lake and Ice Lake.
commit 3ec5d83d2a
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat Jan 25 14:19:40 2020 -0800
x86-64: Avoid rep movsb with short distance [BZ #27130]
introduced some regressions on Intel processors without Fast Short REP
MOV (FSRM). Add Avoid_Short_Distance_REP_MOVSB to avoid rep movsb with
short distance only on Intel processors with FSRM. bench-memmove-large
on Skylake server shows that cycles of __memmove_evex_unaligned_erms
improves for the following data size:
before after Improvement
length=4127, align1=3, align2=0: 479.38 349.25 27%
length=4223, align1=9, align2=5: 405.62 333.25 18%
length=8223, align1=3, align2=0: 786.12 496.38 37%
length=8319, align1=9, align2=5: 727.50 501.38 31%
length=16415, align1=3, align2=0: 1436.88 840.00 41%
length=16511, align1=9, align2=5: 1375.50 836.38 39%
length=32799, align1=3, align2=0: 2890.00 1860.12 36%
length=32895, align1=9, align2=5: 2891.38 1931.88 33%
1. Install <bits/platform/x86.h> for <sys/platform/x86.h> which includes
<bits/platform/x86.h>.
2. Rename HAS_CPU_FEATURE to CPU_FEATURE_PRESENT which checks if the
processor has the feature.
3. Rename CPU_FEATURE_USABLE to CPU_FEATURE_ACTIVE which checks if the
feature is active. There may be other preconditions, like sufficient
stack space or further setup for AMX, which must be satisfied before the
feature can be used.
This fixes BZ #27958.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
From
https://www.intel.com/content/www/us/en/support/articles/000059422/processors.html
* Intel TSX will be disabled by default.
* The processor will force abort all Restricted Transactional Memory (RTM)
transactions by default.
* A new CPUID bit CPUID.07H.0H.EDX[11](RTM_ALWAYS_ABORT) will be enumerated,
which is set to indicate to updated software that the loaded microcode is
forcing RTM abort.
* On processors that enumerate support for RTM, the CPUID enumeration bits
for Intel TSX (CPUID.07H.0H.EBX[11] and CPUID.07H.0H.EBX[4]) continue to
be set by default after microcode update.
* Workloads that were benefited from Intel TSX might experience a change
in performance.
* System software may use a new bit in Model-Specific Register (MSR) 0x10F
TSX_FORCE_ABORT[TSX_CPUID_CLEAR] functionality to clear the Hardware Lock
Elision (HLE) and RTM bits to indicate to software that Intel TSX is
disabled.
1. Add RTM_ALWAYS_ABORT to CPUID features.
2. Set RTM usable only if RTM_ALWAYS_ABORT isn't set. This skips the
string/tst-memchr-rtm etc. testcases on the affected processors, which
always fail after a microcde update.
3. Check RTM feature, instead of usability, against /proc/cpuinfo.
This fixes BZ #28033.
IBT and SHSTK usable bits are copied from CPUID feature bits and later
cleared if kernel doesn't support CET. Copy IBT and SHSTK usable only
if CET is enabled so that they aren't set on CET capable processors
with non-CET enabled glibc.
1. Set Prefer_No_VZEROUPPER if RTM is usable to avoid RTM abort triggered
by VZEROUPPER inside a transactionally executing RTM region.
2. Since to compare 2 32-byte strings, 256-bit EVEX strcmp requires 2
loads, 3 VPCMPs and 2 KORDs while AVX2 strcmp requires 1 load, 2 VPCMPEQs,
1 VPMINU and 1 VPMOVMSKB, AVX2 strcmp is faster than EVEX strcmp. Add
Prefer_AVX2_STRCMP to prefer AVX2 strcmp family functions.
1. Support GLIBC_TUNABLES=glibc.cpu.hwcaps=-XSAVE.
2. Disable all features which depend on XSAVE:
a. If OSXSAVE is disabled by glibc tunables. Or
b. If both XSAVE and XSAVEC aren't usable.
1. Add CPUID_INDEX_14_ECX_0 for CPUID leaf 0x14 to detect PTWRITE feature
in EBX of CPUID leaf 0x14 with ECX == 0.
2. Add PTWRITE detection to CPU feature tests.
3. Add 2 static CPU feature tests.
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
commit 94cd37ebb2
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Sep 16 05:27:32 2020 -0700
x86: Use HAS_CPU_FEATURE with IBT and SHSTK [BZ #26625]
broke
GLIBC_TUNABLES=glibc.cpu.hwcaps=-IBT,-SHSTK
since it can no longer disable IBT nor SHSTK. Handle IBT and SHSTK with:
1. Revert commit 94cd37ebb2.
2. Clears the usable CET feature bits if kernel doesn't support CET.
3. Add GLIBC_TUNABLES tests without dlopen.
4. Add tests to verify that CPU_FEATURE_USABLE on IBT and SHSTK matches
_get_ssp.
5. Update GLIBC_TUNABLES tests with dlopen to verify that CET is disabled
with GLIBC_TUNABLES.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In <sys/platform/x86.h>, define CPU features as enum instead of using
the C preprocessor magic to make it easier to wrap this functionality
in other languages. Move the C preprocessor magic to internal header
for better GCC codegen when more than one features are checked in a
single expression as in x86-64 dl-hwcaps-subdirs.c.
1. Rename COMMON_CPUID_INDEX_XXX to CPUID_INDEX_XXX.
2. Move CPUID_INDEX_MAX to sysdeps/x86/include/cpu-features.h.
3. Remove struct cpu_features and __x86_get_cpu_features from
<sys/platform/x86.h>.
4. Add __x86_get_cpuid_feature_leaf to <sys/platform/x86.h> and put it
in libc.
5. Make __get_cpu_features() private to glibc.
6. Replace __x86_get_cpu_features(N) with __get_cpu_features().
7. Add _dl_x86_get_cpu_features to GLIBC_PRIVATE.
8. Use a single enum index for each CPU feature detection.
9. Pass the CPUID feature leaf to __x86_get_cpuid_feature_leaf.
10. Return zero struct cpuid_feature for the older glibc binary with a
smaller CPUID_INDEX_MAX [BZ #27104].
11. Inside glibc, use the C preprocessor magic so that cpu_features data
can be loaded just once leading to more compact code for glibc.
256 bits are used for each CPUID leaf. Some leaves only contain a few
features. We can add exceptions to such leaves. But it will increase
code sizes and it is harder to provide backward/forward compatibilities
when new features are added to such leaves in the future.
When new leaves are added, _rtld_global_ro offsets will change which
leads to race condition during in-place updates. We may avoid in-place
updates by
1. Rename the old glibc.
2. Install the new glibc.
3. Remove the old glibc.
NB: A function, __x86_get_cpuid_feature_leaf , is used to avoid the copy
relocation issue with IFUNC resolver as shown in IFUNC resolver tests.
1. Move x86 processor cache info to _dl_x86_cpu_features in ld.so.
2. Update tunable bounds with TUNABLE_SET_WITH_BOUNDS.
3. Move x86 cache info initialization to dl-cacheinfo.h and initialize
x86 cache info in init_cpu_features ().
4. Put x86 cache info for libc in cacheinfo.h, which is included in
libc-start.c in libc.a and is included in cacheinfo.c in libc.so.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA
levels:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250
and -mneeded to emit GNU_PROPERTY_X86_ISA_1_NEEDED property with
GNU_PROPERTY_X86_ISA_1_V[234] marker:
https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13
Binutils support for GNU_PROPERTY_X86_ISA_1_V[234] marker were added by
commit b0ab06937385e0ae25cebf1991787d64f439bf12
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Oct 30 06:49:57 2020 -0700
x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker
and
commit 32930e4edbc06bc6f10c435dbcc63131715df678
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Oct 9 05:05:57 2020 -0700
x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker
GNU_PROPERTY_X86_ISA_1_NEEDED property in x86 ELF binaries indicate the
micro-architecture ISA level required to execute the binary. The marker
must be added by programmers explicitly in one of 3 ways:
1. Pass -mneeded to GCC.
2. Add the marker in the linker inputs as this patch does.
3. Pass -z x86-64-v[234] to the linker.
Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
marker support to ld.so if binutils 2.32 or newer is used to build glibc:
1. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
markers to elf.h.
2. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
marker to abi-note.o based on the ISA level used to compile abi-note.o,
assuming that the same ISA level is used to compile the whole glibc.
3. Add isa_1 to cpu_features to record the supported x86 ISA level.
4. Rename _dl_process_cet_property_note to _dl_process_property_note and
add GNU_PROPERTY_X86_ISA_1_V[234] marker detection.
5. Update _rtld_main_check and _dl_open_check to check loaded objects
with the incompatible ISA level.
6. Add a testcase to verify that dlopen an x86-64-v4 shared object fails
on lesser platforms.
7. Use <get-isa-level.h> in dl-hwcaps-subdirs.c and tst-glibc-hwcaps.c.
Tested under i686, x32 and x86-64 modes on x86-64-v2, x86-64-v3 and
x86-64-v4 machines.
Marked elf/tst-isa-level-1 with x86-64-v4, ran it on x86-64-v3 machine
and got:
[hjl@gnu-cfl-2 build-x86_64-linux]$ ./elf/tst-isa-level-1
./elf/tst-isa-level-1: CPU ISA level is lower than required
[hjl@gnu-cfl-2 build-x86_64-linux]$
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
X86 CPU features in ld.so are initialized by init_cpu_features, which is
invoked by DL_PLATFORM_INIT from _dl_sysdep_start. But when ld.so is
loaded by static executable, DL_PLATFORM_INIT is never called. Also
x86 cache info in libc.o and libc.a is initialized by a constructor
which may be called too late. Since some fields in _rtld_global_ro
in ld.so are initialized by dynamic relocation, we can also initialize
x86 CPU features in _rtld_global_ro in ld.so and cache info in libc.so
by initializing dummy function pointers in ld.so and libc.so via IFUNC
relocation.
Key points:
1. IFUNC is always supported, independent of --enable-multi-arch or
--disable-multi-arch. Linker generates IFUNC relocations from input
IFUNC objects and ld.so performs IFUNC relocations.
2. There are no IFUNC dependencies in ld.so before dynamic relocation
have been performed,
3. The x86 CPU features in ld.so is initialized by DL_PLATFORM_INIT
in dynamic executable and by IFUNC relocation in dlopen in static
executable.
4. The x86 cache info in libc.o is initialized by IFUNC relocation.
5. In libc.a, both x86 CPU features and cache info are initialized from
ARCH_INIT_CPU_FEATURES, not by IFUNC relocation, before __libc_early_init
is called.
Note: _dl_x86_init_cpu_features can be called more than once from
DL_PLATFORM_INIT and during relocation in ld.so.
commit 04bba1e5d8
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Aug 5 13:51:56 2020 -0700
x86: Set CPU usable feature bits conservatively [BZ #26552]
Set CPU usable feature bits only for CPU features which are usable in
user space and whose usability can be detected from user space, excluding
features like FSGSBASE whose enable bit can only be checked in the kernel.
no longer turns on the usable bits of IBT and SHSTK since we don't know
if IBT and SHSTK are usable until much later. Use HAS_CPU_FEATURE to
check if the processor supports IBT and SHSTK.
Add Intel Key Locker:
https://software.intel.com/content/www/us/en/develop/download/intel-key-locker-specification.html
support to <sys/platform/x86.h>. Intel Key Locker has
1. KL: AES Key Locker instructions.
2. WIDE_KL: AES wide Key Locker instructions.
3. AESKLE: AES Key Locker instructions are enabled by OS.
Applications should use
if (CPU_FEATURE_USABLE (KL))
and
if (CPU_FEATURE_USABLE (WIDE_KL))
to check if AES Key Locker instructions and AES wide Key Locker
instructions are usable.
Set CPU usable feature bits only for CPU features which are usable in
user space and whose usability can be detected from user space, excluding
features like FSGSBASE whose enable bit can only be checked in the kernel.
Support usable check for all CPU features with the following changes:
1. Change struct cpu_features to
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
so that there is a usable bit for each cpuid bit.
2. After the cpuid bits have been initialized, copy the known bits to the
usable bits. EAX/EBX from INDEX_1 and EAX from INDEX_7 aren't used for
CPU feature detection.
3. Clear the usable bits which require OS support.
4. If the feature is supported by OS, copy its cpuid bit to its usable
bit.
5. Replace HAS_CPU_FEATURE and CPU_FEATURES_CPU_P with CPU_FEATURE_USABLE
and CPU_FEATURE_USABLE_P to check if a feature is usable.
6. Add DEPR_FPU_CS_DS for INDEX_7_EBX_13.
7. Unset MPX feature since it has been deprecated.
The results are
1. If the feature is known and doesn't requre OS support, its usable bit
is copied from the cpuid bit.
2. Otherwise, its usable bit is copied from the cpuid bit only if the
feature is known to supported by OS.
3. CPU_FEATURE_USABLE/CPU_FEATURE_USABLE_P are used to check if the
feature can be used.
4. HAS_CPU_FEATURE/CPU_FEATURE_CPU_P are used to check if CPU supports
the feature.
Add x86_rep_movsb_threshold and x86_rep_stosb_threshold to tunables
to update thresholds for "rep movsb" and "rep stosb" at run-time.
Note that the user specified threshold for "rep movsb" smaller than
the minimum threshold will be ignored.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Intel Advanced Matrix Extensions (Intel AMX) is a new programming
paradigm consisting of two components: a set of 2-dimensional registers
(tiles) representing sub-arrays from a larger 2-dimensional memory image,
and accelerators able to operate on tiles. Intel AMX is an extensible
architecture. New accelerators can be added and the existing accelerator
may be enhanced to provide higher performance. The initial features are
AMX-BF16, AMX-TILE and AMX-INT8, which are usable only if the operating
system supports both XTILECFG state and XTILEDATA state.
Add AMX-BF16, AMX-TILE and AMX-INT8 support to HAS_CPU_FEATURE and
CPU_FEATURE_USABLE.
1. Divide architecture features into the usable features and the preferred
features. The usable features are for correctness and can be exported in
a stable ABI. The preferred features are for performance and only for
glibc internal use.
2. Change struct cpu_features to
struct cpu_features
{
struct cpu_features_basic basic;
unsigned int *usable_p;
struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX];
unsigned int usable[USABLE_FEATURE_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
and initialize usable_p to pointer to the usable arary so that
struct cpu_features
{
struct cpu_features_basic basic;
unsigned int *usable_p;
struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX];
};
can be exported via a stable ABI. The cpuid and usable arrays can be
expanded with backward binary compatibility for both .o and .so files.
3. Add COMMON_CPUID_INDEX_7_ECX_1 for AVX512_BF16.
4. Detect ENQCMD, PKS, AVX512_VP2INTERSECT, MD_CLEAR, SERIALIZE, HYBRID,
TSXLDTRK, L1D_FLUSH, CORE_CAPABILITIES and AVX512_BF16.
5. Rename CAPABILITIES to ARCH_CAPABILITIES.
6. Check if AVX512_VP2INTERSECT, AVX512_BF16 and PKU are usable.
7. Update CPU feature detection test.
1. Include <dl-procruntime.c> to get architecture specific initializer in
rtld_global.
2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1.
3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a
struct of 2 bitfields for IBT and SHSTK control
This fixes [BZ #25887].
