If the build itself is run in a container, we may not be able to
fully set up a nested container for test-container testing.
Notably is the mounting of /proc, since it's critical that it
be mounted from within the same PID namespace as its users, and
thus cannot be bind mounted from outside the container like other
mounts.
This patch defaults to using the parent's PID namespace instead of
creating a new one, as this is more likely to be allowed.
If the test needs an isolated PID namespace, it should add the "pidns"
command to its init script.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 2fe64148a8)
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from 38bc0f4e78)
It returns a range of file descriptor referring to the '/dev/null'
pathname. The function takes care of restarting the open range
if a file descriptor is found within the specified range and
also increases RLIMIT_NOFILE if required.
Checked on x86_64-linux-gnu.
(cherry picked from commit e814f4b04e)
The benchmark and tests must fail in case of allocation failure in the
implementation array. Also annotate the x* allocators in support.h so
that the compiler has more information about them.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The code to allocate a stack from xsigstack is refactored so it can
be more generic. The new support_stack_alloc() also set PROT_EXEC
if DEFAULT_STACK_PERMS has PF_X. This is required on some
architectures (hppa for instance) and trying to access the rtld
global from testsuite will require more intrusive refactoring
in the ldsodefs.h header.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also ran
tst-xsigstack on both hppa and ia64.
It is a simple wrapper over timer_create, timer_settime, and
sigaction. It will be used to check for large timeout to trigger an
EINTR and to avoid use a large timeout (as for alarm()).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
support_stat_nanoseconds cannot restore the ctime time, and
this may lead to sporadic test failures. Therefore, probe for
nanoseconds support before the initial statx call.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now that non-LFS stat function is implemented on to on LFS, it will
use statx when available. It allows to check for nanosecond timestamp
if the kernel supports __NR_statx.
Checked on s390-linux-gnu with 4.12.14 kernel.
Both new tests io/tst-stat and io/tst-stat-lfs (_FILE_OFFSET_BITS=64)
are comparing the nanosecond fields with the statx result. Unfortunately
on s390(31bit) those fields are always zero if old KABI with non-LFS
support is used. With _FILE_OFFSET_BITS=64 stat is using statx internally.
As suggested by Adhemerval this patch disables the nanosecond check for
s390(31bit).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some Linux filesystems might not fully support 64 bit timestamps [1],
which make some Linux specific tests to fail when they check for the
functionality.
This patch adds a new libsupport function, support_path_support_time64,
that returns whether the target file supports or not 64 bit timestamps.
The support is checked by issuing a utimensat and verifying both the
last access and last modification time against a statx call.
The tests that might fail are also adjusted to check the file support
as well:
$ dd if=/dev/zero of=loopbackfile.img bs=100M count=1
1+0 records in
1+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 0,0589568 s, 1,8 GB/s
$ sudo losetup -fP loopbackfile.img
$ mkfs.xfs loopbackfile.img
meta-data=loopbackfile.img isize=512 agcount=4, agsize=6400 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=1368, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
$ mkdir loopfs
$ sudo mount -o loop /dev/loop0 loopfs/
$ sudo chown -R azanella:azanella loopfs
$ TMPDIR=loopfs/ ./testrun.sh misc/tst-utimes
error: ../sysdeps/unix/sysv/linux/tst-utimes.c:55: File loopfs//utimesfECsK1 does not support 64-bit timestamps
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1795576
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
During testing of localedef running in a minimal container
there were several error cases which were hard to diagnose
since they appeared as strerror (errno) values printed by the
higher level functions. This change adds three new verbose
messages for potential failure paths. The new messages give
the user the opportunity to use -v and display additional
information about why localedef might be failing. I found
these messages useful myself while writing a localedef
container test for --no-hard-links.
Since the changes cleanup the code that handle codeset
normalization we add tst-localedef-path-norm which contains
many sub-tests to verify the correct expected normalization of
codeset strings both when installing to default paths (the
only time normalization is enabled) and installing to absolute
paths. During the refactoring I created at least one
buffer-overflow which valgrind caught, but these tests did not
catch because the exec in the container had a very clean heap
with zero-initialized memory. However, between valgrind and
the tests the results are clean.
The new tst-localedef-path-norm passes without regression on
x86_64.
Change-Id: I28b9f680711ff00252a2cb15625b774cc58ecb9d
The alignment of TLS variables is wrong if accessed from within a thread
for architectures with tls variant TLS_TCB_AT_TP.
For the main thread the static tls data is properly aligned.
For other threads the alignment depends on the alignment of the thread
pointer as the static tls data is located relative to this pointer.
This patch adds this alignment for TLS_TCB_AT_TP variants in the same way
as it is already done for TLS_DTV_AT_TP. The thread pointer is also already
properly aligned if the user provides its own stack for the new thread.
This patch extends the testcase nptl/tst-tls1.c in order to check the
alignment of the tls variables and it adds a pthread_create invocation
with a user provided stack.
The test itself is migrated from test-skeleton.c to test-driver.c
and the missing support functions xpthread_attr_setstack and xposix_memalign
are added.
ChangeLog:
[BZ #23403]
* nptl/allocatestack.c (allocate_stack): Align pointer pd for
TLS_TCB_AT_TP tls variant.
* nptl/tst-tls1.c: Migrate to support/test-driver.c.
Add alignment checks.
* support/Makefile (libsupport-routines): Add xposix_memalign and
xpthread_setstack.
* support/support.h: Add xposix_memalign.
* support/xthread.h: Add xpthread_attr_setstack.
* support/xposix_memalign.c: New File.
* support/xpthread_attr_setstack.c: Likewise.
The test-container.c file assumes that ld.so is always named
something like /elf/ld-linux-*.
But e.g. on s390x it is named ld64.so.1 or ld.so.1 on s390.
There are other architectures like power or mips with similar names.
This patch introduces the new global variable support_objdir_elf_ldso
which contains the absolute path to the runtime linker used by the
testsuite, e.g. OBJDIR_PATH/elf/ld-linux-x86-64.so.2.
The check in test-container.c is now comparing against this path.
Without this patch, test-container.c is searching invalid files / directories
and fails to find glibc/nss/tst-nss-test3.root/tst-nss-test3.script.
Then the test tst-nss-test3 fails!
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* support/support.h (support_objdir_elf_ldso): New variable.
* support/support_paths.c (support_objdir_elf_ldso): Likewise.
* support/Makefile (CFLAGS-support_paths.c): Add definition
for OBJDIR_ELF_LDSO_PATH.
* support/test-container.c (main): Search for the ld.so
which is also used by the testsuite.
copy_file_range can't be used to copy a file from glibc source directory
to glibc build directory since they may be on different filesystems.
This patch adds xcopy_file_range for cross-device copy.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23597]
* support/Makefile (libsupport-routines): Add
support_copy_file_range and xcopy_file_range.
* support/support.h: Include <sys/types.h>.
(support_copy_file_range): New prototype.
* support/support_copy_file_range.c: New file. Copied and
modified from io/copy_file_range-compat.c.
* support/test-container.c (copy_one_file): Call xcopy_file_rang
instead of copy_file_range.
* support/xcopy_file_range.c: New file.
* support/xunistd.h (xcopy_file_range): New prototype.
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
