AuroraMiddleware/glibc
1
0
Fork 0
mirror of https://sourceware.org/git/glibc.git synced 2024-11-23 13:30:06 +00:00
Code Issues Packages Projects Releases Wiki Activity
39,309 Commits 334 Branches 1,646 Tags 277 MiB
f9646d138f
Commit Graph

1165 Commits

Author SHA1 Message Date
Patrick McGehearty
a14d8acd32 Improves __ieee754_exp(x) performance by 18-37% when |x| < 1.0397 
Adds a fast path to e_exp.c when |x| < 1.03972053527832.
When values are tested in isolation, reduction in execution
time is: aarch 30%, sparc 18%, x86 37%.
When comparing benchtests/bench.out which includes values
outside that range, the gains are:
aarch 8%, sparc 5%, x86 9%.

make check is clean (no increase in ulp for any math test).
Testing 20M values for each rounding mode in that range shows
approximately one in 200 values is off by 1 ulp. No value tested
for exp(x) changed by 2 or more ulp.

No observed change in performance or accuracy for x outside
fast path range.

These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
 2018-04-15 18:46:37 -04:00
Wilco Dijkstra
e88ecbbfe8 [PATCH 7/7] sin/cos slow paths: refactor sincos implementation 
Refactor the sincos implementation - rather than rely on odd partial inlining
of preprocessed portions from sin and cos, explicitly write out the cases.
This makes sincos much easier to maintain and provides an additional 16-20%
speedup between 0 and 2^27.  The overall speedup of sincos is 48% over this range.
Between 0 and PI it is 66% faster.

	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Cleanup ifdefs.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sin.c (__sincos): Refactor using the same
	logic as sin and cos.
 2018-04-03 16:52:18 +01:00
Wilco Dijkstra
aef3e2558a [PATCH 6/7] sin/cos slow paths: refactor duplicated code into dosin 
Refactor duplicated code into do_sin.  Since all calls to do_sin use copysign to
set the sign of the result, move it inside do_sin.  Small inputs use a separate
polynomial, so move this into do_sin as well (the check is based on the more
conservative case when doing large range reduction, but could be relaxed).

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sin): Use TAYLOR_SIN for small
	inputs.  Return correct sign.
	(do_sincos): Remove small input check before do_sin, let do_sin set
	the sign.
	(__sin): Likewise.
	(__cos): Likewise.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
72f6e9a3e3 [PATCH 5/7] sin/cos slow paths: remove unused slowpath functions 
Remove all unused slowpath functions.

	* sysdeps/ieee754/dbl-64/s_sin.c (TAYLOR_SLOW): Remove.
	(do_cos_slow): Likewise.
	(do_sin_slow): Likewise.
	(reduce_and_compute): Likewise.
	(slow): Likewise.
	(slow1): Likewise.
	(slow2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bslow): Likewise.
	(bslow1): Likewise.
	(bslow2): Likewise.
	(cslow2): Likewise.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
649095838b [PATCH 4/7] sin/cos slow paths: remove slow paths from huge range reduction 
For huge inputs use the improved do_sincos function as well.  Now no cases use
the correction factor returned by do_sin, do_cos and TAYLOR_SIN, so remove it.

	* sysdeps/ieee754/dbl-64/s_sin.c (TAYLOR_SIN): Remove cor parameter.
	(do_cos): Remove corp parameter and calculations.
	(do_sin): Likewise.
	(do_sincos): Remove cor variable.
	(__sin): Use do_sincos for huge inputs.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise.
	(reduce_and_compute_sincos): Remove unused function.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
d9469deb14 [PATCH 3/7] sin/cos slow paths: remove slow paths from small range reduction 
This patch improves the accuracy of the range reduction.  When the input is
large (2^27) and very close to a multiple of PI/2, using 110 bits of PI is not
enough.  Improve range reduction accuracy to 136 bits.  As a result the special
checks for results close to zero can be removed.  The ULP of the polynomials is
at worst 0.55ULP, so there is no reason for the slow functions, and they can be
removed.

	* sysdeps/ieee754/dbl-64/s_sin.c (reduce_sincos_1): Rename to
	reduce_sincos, improve accuracy to 136 bits.
	(do_sincos_1): Rename to do_sincos, remove fallbacks to slow functions.
	(__sin): Use improved reduction and simplified do_sincos calculation.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
7a5640f23a [PATCH 2/7] sin/cos slow paths: remove large range reduction 
This patch removes the large range reduction code and defers to the huge range
reduction code.  The first level range reducer supports inputs up to 2^27,
which is way too large given that inputs for sin/cos are typically small
(< 10), and optimizing for a smaller range would give a significant speedup.

Input values above 2^27 are practically never used, so there is no reason for
supporting range reduction between 2^27 and 2^48.  Removing it significantly
simplifies code and enables further speedups.  There is about a 2.3x slowdown
in this range due to __branred being extremely slow  (a better algorithm could
easily more than double performance).

	* sysdeps/ieee754/dbl-64/s_sin.c (reduce_sincos_2): Remove function.
	(do_sincos_2): Likewise.
	(__sin): Remove middle range reduction case.
	(__cos): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Remove middle range
	reduction case.
 2018-04-03 16:52:17 +01:00
Wilco Dijkstra
19a8b9a300 [PATCH 1/7] sin/cos slow paths: avoid slow paths for small inputs 
This series of patches removes the slow patchs from sin, cos and sincos.
Besides greatly simplifying the implementation, the new version is also much
faster for inputs up to PI (41% faster) and for large inputs needing range
reduction (27% faster).

ULP is ~0.55 with no errors found after testing 1.6 billion inputs across most
of the range with mpsin and mpcos.  The number of incorrectly rounded results
(ie. ULP >0.5) is at most ~2750 per million inputs between 0.125 and 0.5,
the average is ~850 per million between 0 and PI.

Tested on AArch64 and x86_64 with no regressions.

The first patch removes the slow paths for the cases where the input is small
and doesn't require range reduction.  Update ULP tables for sin, cos and sincos
on AArch64 and x86_64.

	* sysdeps/aarch64/libm-test-ulps: Update ULP for sin, cos, sincos.
	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Remove slow paths for small
	inputs.
	(__cos): Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sin, cos, sincos.
 2018-04-03 16:52:16 +01:00
Joseph Myers
8d3f9e85cf Add narrowing subtract functions. 
This patch adds the narrowing subtract functions from TS 18661-1 to
glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64
for all configurations; f32subf64x, f32subf128, f64subf64x,
f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations
with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt.

The changes are essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well.

Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.

	* math/Makefile (libm-narrow-fns): Add sub.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing subtract functions.
	* math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW.
	* math/gen-auto-libm-tests.c (test_functions): Add sub.
	* math/math-narrow.h (CHECK_NARROW_SUB): New macro.
	(NARROW_SUB_ROUND_TO_ODD): Likewise.
	(NARROW_SUB_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__fsubl): New
	macro.
	(__dsubl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and
	dsub.
	(CFLAGS-nldbl-dsub.c): New variable.
	(CFLAGS-nldbl-fsub.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_dsubl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl,
	dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx.
	* math/auto-libm-test-in: Add tests of sub.
	* math/auto-libm-test-out-narrow-sub: New generated file.
	* math/libm-test-narrow-sub.inc: New file.
	* sysdeps/i386/fpu/s_f32xsubf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fsub.c: Likewise.
	* sysdeps/ieee754/float128/s_f32subf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64subf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fsub.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2018-03-20 00:34:52 +00:00
Wilco Dijkstra
f67a8147b0 Rename all __ieee754_sqrt(f/l) calls to sqrt(f/l) 
Use sqrt(f/l) to enable inlining by GCC - if inlining doesn't happen,
the asm redirect ensures we will still call __ieee754_sqrt(f/l).

	* sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Use sqrt.
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise.
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise.
	* sysdeps/ieee754/dbl-64/e_j0.c (__ieee754_j0): Likewise.
	* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Likewise.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	* sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/e_acosh.c (__ieee754_acosh): Likewise.
	* sysdeps/ieee754/flt-32/e_acosf.c (__ieee754_acosf): Likewise.
	* sysdeps/ieee754/flt-32/e_acoshf.c (__ieee754_acoshf): Likewise.
	* sysdeps/ieee754/flt-32/e_asinf.c (__ieee754_asinf): Likewise.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
	* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise.
	* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_j0f): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise.
	* sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl): Use sqrtl.
	* sysdeps/ieee754/ldbl-128/e_acosl.c (__ieee754_acosl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Likewise.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_asinhl.c (__ieee754_asinhl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c (__ieee754_acoshl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_acosl.c (__ieee754_acosl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (__ieee754_j0l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (__ieee754_j1l): Likewise
	* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c (__ieee754_asinhl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Use sqrtl.
	* sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_asinhl.c (__ieee754_asinhl): Likewise.
	* sysdeps/m68k/m680x0/fpu/e_pow.c (__ieee754_pow): Likewise.
	* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
	* sysdeps/powerpc/fpu/e_hypotf.c (__ieee754_hypotf): Likewise.
 2018-03-15 19:21:36 +00:00
Zack Weinberg
d3da750d01 nldbl-compat.c: Include math.h before nldbl-compat.h. 
Jeff Law noticed that native PowerPC builds were broken by my having
made math_ldbl_opt.h not include math.h.  nldbl-compat.c formerly got
math.h via libioP.h and math_ldbl_opt.h, *without* __NO_LONG_DOUBLE_MATH;
after my change it got it via nldbl-compat.h *with* __NO_LONG_DOUBLE_MATH,
but __NO_LONG_DOUBLE_MATH mode is forbidden on hosts that define
__HAVE_DISTINCT_FLOAT128, so the build breaks.  This is the quick fix.

	* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: Include math.h
	before nldbl-compat.h.
 2018-03-11 14:20:13 -04:00
Zack Weinberg
0d13dfa17b Don't include math.h/math_private.h in math_ldbl_opt.h. 
The sysdeps/ieee754/ldbl-opt version of math_ldbl_opt.h includes
math.h and math_private.h, despite not having any need for those
headers itself; the sysdeps/generic version doesn't.  About 20 files
are relying on math_ldbl_opt.h to include math.h and/or math_private.h
for them, even though none of them necessarily used on a platform that
needs ldbl-opt support.

	* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: Don't include
	math.h or math_private.h.

	* sysdeps/alpha/fpu/s_isnan.c
	* sysdeps/ieee754/ldbl-128ibm/s_ceill.c
	* sysdeps/ieee754/ldbl-128ibm/s_floorl.c
	* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c
	* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c
	* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c
	* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c
	* sysdeps/ieee754/ldbl-128ibm/s_rintl.c
	* sysdeps/ieee754/ldbl-128ibm/s_roundl.c
	* sysdeps/ieee754/ldbl-128ibm/s_truncl.c
	* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/e_hypot.c
	* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/e_hypotf.c:
	* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf.c
	* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot.c
	* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf.c:
	Include math_private.h.

	* sysdeps/ieee754/ldbl-64-128/s_finitel.c
	* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c
	* sysdeps/ieee754/ldbl-64-128/s_isinfl.c
	* sysdeps/ieee754/ldbl-64-128/s_isnanl.c
	* sysdeps/ieee754/ldbl-64-128/s_signbitl.c
	* sysdeps/powerpc/power7/fpu/s_logb.c:
	Include math.h and math_private.h.
 2018-03-10 15:18:08 -05:00
Zack Weinberg
9964a14579 Mechanically remove _IO_ name aliases for types and constants. 
This patch mechanically removes all remaining uses, and the
definitions, of the following libio name aliases:

 name                         replaced with
 ----                         -------------
 _IO_FILE                     FILE
 _IO_fpos_t                   __fpos_t
 _IO_fpos64_t                 __fpos64_t
 _IO_size_t                   size_t
 _IO_ssize_t                  ssize_t or __ssize_t
 _IO_off_t                    off_t
 _IO_off64_t                  off64_t
 _IO_pid_t                    pid_t
 _IO_uid_t                    uid_t
 _IO_wint_t                   wint_t
 _IO_va_list                  va_list or __gnuc_va_list
 _IO_BUFSIZ                   BUFSIZ
 _IO_cookie_io_functions_t    cookie_io_functions_t
 __io_read_fn                 cookie_read_function_t
 __io_write_fn                cookie_write_function_t
 __io_seek_fn                 cookie_seek_function_t
 __io_close_fn                cookie_close_function_t

I used __fpos_t and __fpos64_t instead of fpos_t and fpos64_t because
the definitions of fpos_t and fpos64_t depend on the largefile mode.
I used __ssize_t and __gnuc_va_list in a handful of headers where
namespace cleanliness might be relevant even though they're
internal-use-only.  In all other cases, I used the public-namespace
name.

There are a tiny handful of places where I left a use of 'struct _IO_FILE'
alone, because it was being used together with 'struct _IO_FILE_plus'
or 'struct _IO_FILE_complete' in the same arithmetic expression.

Because this patch was almost entirely done with search and replace, I
may have introduced indentation botches.  I did proofread the diff,
but I may have missed something.

The ChangeLog below calls out all of the places where this was not a
pure search-and-replace change.

Installed stripped libraries and executables are unchanged by this patch,
except that some assertions in vfscanf.c change line numbers.

	* libio/libio.h (_IO_FILE): Delete; all uses changed to FILE.
	(_IO_fpos_t): Delete; all uses changed to __fpos_t.
	(_IO_fpos64_t): Delete; all uses changed to __fpos64_t.
	(_IO_size_t): Delete; all uses changed to size_t.
	(_IO_ssize_t): Delete; all uses changed to ssize_t or __ssize_t.
	(_IO_off_t): Delete; all uses changed to off_t.
	(_IO_off64_t): Delete; all uses changed to off64_t.
	(_IO_pid_t): Delete; all uses changed to pid_t.
	(_IO_uid_t): Delete; all uses changed to uid_t.
	(_IO_wint_t): Delete; all uses changed to wint_t.
	(_IO_va_list): Delete; all uses changed to va_list or __gnuc_va_list.
	(_IO_BUFSIZ): Delete; all uses changed to BUFSIZ.
	(_IO_cookie_io_functions_t): Delete; all uses changed to
	cookie_io_functions_t.
	(__io_read_fn): Delete; all uses changed to cookie_read_function_t.
	(__io_write_fn): Delete; all uses changed to cookie_write_function_t.
	(__io_seek_fn): Delete; all uses changed to cookie_seek_function_t.
	(__io_close_fn): Delete: all uses changed to cookie_close_function_t.

	* libio/iofopncook.c: Remove unnecessary forward declarations.
	* libio/iolibio.h: Correct outdated commentary.
	* malloc/malloc.c (__malloc_stats): Remove unnecessary casts.
	* stdio-common/fxprintf.c (__fxprintf_nocancel):
	Remove unnecessary casts.
	* stdio-common/getline.c: Use _IO_getdelim directly.
	Don't redefine ssize_t.
	* stdio-common/printf_fp.c, stdio_common/printf_fphex.c
	* stdio-common/printf_size.c: Don't redefine size_t or FILE.
	Remove outdated comments.
	* stdio-common/vfscanf.c: Don't redefine va_list.
 2018-02-21 14:11:05 -05:00
Wilco Dijkstra
610ee1fc93 Remove mplog and mpexp 
Remove the now unused mplog and mpexp files.

	* math/Makefile: Remove mpexp.c and mplog.c
	* sysdeps/i386/fpu/mpexp.c: Delete file.
	* sysdeps/i386/fpu/mplog.c: Likewise.
	* sysdeps/ia64/fpu/mpexp.c: Likewise.
	* sysdeps/ia64/fpu/mplog.c: Likewise.
	* sysdeps/ieee754/dbl-64/e_exp.c: Remove mention of mpexp and mplog.
	* sysdeps/ieee754/dbl-64/mpa.h (__pow_mp): Remove unused function.
	* sysdeps/ieee754/dbl-64/mpexp.c: Delete file.
	* sysdeps/ieee754/dbl-64/mplog.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/mpexp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/mplog.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/Makefile: Remove mpexp* and mplog*.
	* sysdeps/x86_64/fpu/multiarch/e_log-avx.c: Remove unused defines.
	* sysdeps/x86_64/fpu/multiarch/e_log-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_log-fma4.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mpexp-avx.c: Delete file.
	* sysdeps/x86_64/fpu/multiarch/mpexp-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mpexp-fma4.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mplog-avx.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mplog-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/mplog-fma4.c: Likewise.
 2018-02-15 12:41:05 +00:00
Szabolcs Nagy
de800d8305 Remove slow paths from exp 
Remove the __slowexp code, so exp is no longer correctly rounded.  The
result is computed to about 70 bits precision so the worst case ulp
error is about 0.500007 in nearest rounding mode.

	* manual/probes.texi: Remove slowexp probes.
	* math/Makefile: Remove slowexp.
	* sysdeps/generic/math_private.h (__slowexp): Remove.
	* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Remove __slowexp and
	document error bounds.
	* sysdeps/i386/fpu/slowexp.c: Remove.
	* sysdeps/ia64/fpu/slowexp.c: Remove.
	* sysdeps/ieee754/dbl-64/slowexp.c: Remove.
	* sysdeps/ieee754/dbl-64/uexp.h (err_0): Remove.
	* sysdeps/m68k/m680x0/fpu/slowexp.c: Remove.
	* sysdeps/powerpc/power4/fpu/Makefile (CPPFLAGS-slowexp.c): Remove.
	* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowexp-fma.
	* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Remove.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Remove.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Remove.
	* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Remove.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Remove.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Remove.
 2018-02-12 11:33:33 +00:00
Wilco Dijkstra
c3d466cba1 Remove slow paths from pow 
Remove the slow paths from pow.  Like several other double precision math
functions, pow is exactly rounded.  This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP.  Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.

All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1).
The worst case error is ~0.506ULP.  A simple test over a few hundred million
values shows pow is 10% faster on average.  This fixes BZ #13932.

	[BZ #13932]
	* sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove.
	* benchtests/pow-inputs: Update comment for slow path cases.
	* manual/probes.texi (slowpow_p10): Delete removed probe.
	(slowpow_p10): Likewise.
	* math/Makefile: Remove halfulp.c and slowpow.c.
	* sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1.
	* sysdeps/generic/math_private.h (__exp1): Remove error argument.
	(__halfulp): Remove.
	(__slowpow): Remove.
	* sysdeps/i386/fpu/halfulp.c: Delete file.
	* sysdeps/i386/fpu/slowpow.c: Likewise.
	* sysdeps/ia64/fpu/halfulp.c: Likewise.
	* sysdeps/ia64/fpu/slowpow.c: Likewise.
	* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument,
	improve comments and add error analysis.
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis.
	(power1): Remove function:
	(log1): Remove error argument, add error analysis.
	(my_log2): Remove function.
	* sysdeps/ieee754/dbl-64/halfulp.c: Delete file.
	* sysdeps/ieee754/dbl-64/slowpow.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise.
	* sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c.
	* sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1.
	* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c,
	slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c.
	* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define.
	* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise.
	* sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file.
	* sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
 2018-02-12 10:47:09 +00:00
Joseph Myers
d8742dd82f Add narrowing add functions. 
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt.  As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.

Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format).  The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding).  The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files.  As previously discussed, optimized versions
for particular architectures are possible, but not included.

i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double.  (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.)  mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.

To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.

In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).

Tested for x86_64 and x86, with both GCC 6 and GCC 7.  Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7.  Tested with build-many-glibcs.py with both GCC 6 and GCC 7.

	* math/Makefile (libm-narrow-fns): Add add.
	(libm-test-funcs-narrow): Likewise.
	* math/Versions (GLIBC_2.28): Add narrowing add functions.
	* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
	* math/gen-auto-libm-tests.c (test_functions): Add add.
	* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
	(NARROW_ADD_ROUND_TO_ODD): Likewise.
	(NARROW_ADD_TRIVIAL): Likewise.
	* sysdeps/ieee754/float128/float128_private.h (__faddl): New
	macro.
	(__daddl): Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
	dadd.
	(CFLAGS-nldbl-dadd.c): New variable.
	(CFLAGS-nldbl-fadd.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
	__nldbl_daddl.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
	prototype.
	* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
	daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
	* math/auto-libm-test-in: Add tests of add.
	* math/auto-libm-test-out-narrow-add: New generated file.
	* math/libm-test-narrow-add.inc: New file.
	* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
	* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
	* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
	* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Update.
	* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2018-02-10 02:08:43 +00:00
Joseph Myers
8e554659ad Add test infrastructure for narrowing libm functions. 
This patch continues preparations for adding TS 18661-1 narrowing libm
functions by adding the required testsuite infrastructure to test such
functions through the libm-test infrastructure.

That infrastructure is based around testing for a single type, FLOAT.
For the narrowing functions, FLOAT, the "main" type for testing, is
the function return type; the argument type is ARG_FLOAT.  This is
consistent with how the code built once for each type,
libm-test-support.c, depends on FLOAT for such things as calculating
ulps errors in results but can already handle different argument types
(pointers, integers, long double for nexttoward).

Makefile machinery is added to handle building tests for all pairs of
types for which there are narrowing functions (as with non-narrowing
functions, aliases are tested just the same as the functions they
alias).  gen-auto-libm-tests gains a --narrow option for building
outputs for narrowing functions (so narrowing sqrt and fma will share
the same inputs as non-narrowing, but gen-auto-libm-tests will be run
with and without that option to generate different output files).  In
the narrowing case, the auto-libm-test-out-narrow-* files include
annotations for each test about what properties ARG_FLOAT must have to
be able to represent all the inputs for that test; those annotations
result in calls to the TEST_COND_arg_fmt macro.

gen-libm-test.pl has some minor updates to handle narrowing tests (for
example, arguments in such tests must be surrounded by ARG_LIT calls
instead of LIT calls).  Various new macros are added to the C test
support code (for example, sNaN initializers need to be properly
typed, so arg_snan_value is added; other such arg_* macros are added
as it seems cleanest to do so, though some are not strictly required).
Special-casing of the ibm128 format to allow for its limitations is
adjusted to handle it as the argument format as well as as the result
format; thus, the tests of the new functions allow nonzero ulps only
in the case where ibm128 is the argument format, as otherwise the
functions correspond to fully-defined IEEE operations.  The ulps in
question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps
(with 1ulp errors then listed for double and float for that function
in powerpc); no support is added to generate corresponding faddl /
daddl ulps listings in the ulps table in the manual.

For the previous patch, I noted the need to avoid spurious macro
expansions of identifiers such as "add".  A test test-narrow-macros.c
is added to verify such macro expansions are successfully avoided, and
there is also a -mlong-double-64 version of that test for ldbl-opt.
This test is set up to cover the full set of relevant identifiers from
the start rather than adding functions one at a time as each function
group is added.

Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with the actual addition of
"add" functions).

	* math/Makefile (test-type-pairs): New variable.
	(test-type-pairs-f64xf128-yes): Likewise.
	(tests): Add test-narrow-macros.
	(libm-test-funcs-narrow): New variable.
	(libm-test-c-narrow): Likewise.
	(generated): Add $(libm-test-c-narrow).
	(libm-tests-base-narrow): New variable.
	(libm-tests-narrow): Likewise.
	(libm-tests): Add $(libm-tests-narrow).
	(libm-tests-for-type): Handle $(libm-tests-narrow).
	(libm-test-c-narrow-obj): New variable.
	($(libm-test-c-narrow-obj)): New rule.
	($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise.
	($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use
	$(o-iterator) to set dependencies and CFLAGS.
	* math/gen-auto-libm-tests.c: Document use for narrowing
	functions.
	(output_for_one_input_case): Take argument NARROW.
	(generate_output): Likewise.  Update call to
	output_for_one_input_case.
	(main): Take --narrow option.  Update call to generate_output.
	* math/gen-libm-test.pl (_apply_lit): Take macro name as argument.
	(apply_lit): Update call to _apply_lit.
	(apply_arglit): New function.
	(parse_args): Handle "a" arguments.
	(parse_auto_input): Handle format names using ":".
	* math/README.libm-test: Document "a" parameter type.
	* math/libm-test-support.h (ARG_TYPE_MIN): New macro.
	(ARG_TYPE_TRUE_MIN): Likewise.
	(ARG_TYPE_MAX): Likwise.
	(ARG_MIN_EXP): Likewise.
	(ARG_MAX_EXP): Likewise.
	(ARG_MANT_DIG): Likewise.
	(TEST_COND_arg_ibm128): Likewise.
	(TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT].
	(TEST_COND_arg_fmt): New macro.
	(init_max_error): Update prototype.
	* math/libm-test-support.c (test_ibm128): New variable.
	(init_max_error): Take argument testing_ibm128 and set test_ibm128
	instead of using [TEST_COND_ibm128] conditional.
	(test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128.
	* math/libm-test-driver.c (STR_ARG_FLOAT): New macro.
	[TEST_NARROW] (TEST_MSG): New definition.
	(arg_plus_zero): New macro.
	(arg_minus_zero): Likewise.
	(arg_plus_infty): Likewise.
	(arg_minus_infty): Likewise.
	(arg_qnan_value_pl): Likewise.
	(arg_qnan_value): Likewise.
	(arg_snan_value_pl): Likewise.
	(arg_snan_value): Likewise.
	(arg_max_value): Likewise.
	(arg_min_value): Likewise.
	(arg_min_subnorm_value): Likewise.
	[ARG_FLOAT] (struct test_aa_f_data): New struct type.
	(RUN_TEST_LOOP_aa_f): New macro.
	(TEST_SUFF): New macro.
	(TEST_SUFF_STR): Likewise.
	[!TEST_MATHVEC] (VEC_SUFF): Don't define.
	(TEST_COND_any_ibm128): New macro.
	(START): Use TEST_SUFF and TEST_SUFF_STR in initializer for
	this_func.  Update call to init_max_error.
	* math/test-double.h (FUNC_NARROW_PREFIX): New macro.
	* math/test-float.h (FUNC_NARROW_PREFIX): Likewise.
	* math/test-float128.h (FUNC_NARROW_PREFIX): Likewise.
	* math/test-float32.h (FUNC_NARROW_PREFIX): Likewise.
	* math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise.
	* math/test-float64.h (FUNC_NARROW_PREFIX): Likewise.
	* math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise.
	* math/test-math-scalar.h (TEST_NARROW): Likewise.
	* math/test-math-vector.h (TEST_NARROW): Likewise.
	* math/test-arg-double.h: New file.
	* math/test-arg-float128.h: Likewise.
	* math/test-arg-float32x.h: Likewise.
	* math/test-arg-float64.h: Likewise.
	* math/test-arg-float64x.h: Likewise.
	* math/test-arg-ldouble.h: Likewise.
	* math/test-math-narrow.h: Likewise.
	* math/test-narrow-macros.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (tests): Add
	test-narrow-macros-ldbl-64.
	(CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
 2018-02-09 21:55:48 +00:00
Joseph Myers
63716ab270 Add build infrastructure for narrowing libm functions. 
TS 18661-1 defines libm functions that carry out an operation (+ - * /
sqrt fma) on their arguments and return a result rounded to a
(usually) narrower type, as if the original result were computed to
infinite precision and then rounded directly to the result type
without any intermediate rounding to the argument type.  For example,
fadd, faddl and daddl for addition.  These are the last remaining TS
18661-1 functions left to be added to glibc.  TS 18661-3 extends this
to corresponding functions for _FloatN and _FloatNx types.

As functions parametrized by two rather than one varying
floating-point types, these functions require infrastructure in glibc
that was not required for previous libm functions.  This patch
provides such infrastructure - excluding test support, and actual
function implementations, which will be in subsequent patches.

Declaring the functions uses a header bits/mathcalls-narrow.h, which
is included many times, for each relevant pair of types.  This will
end up containing macro calls of the form

__MATHCALL_NARROW (__MATHCALL_NAME (add), __MATHCALL_REDIR_NAME (add), 2);

for each family of narrowing functions.  (The structure of this macro
call, with the calls to __MATHCALL_NAME and __MATHCALL_REDIR_NAME
there rather than in the definition of __MATHCALL_NARROW, arises from
the names such as "add" *not* themselves being reserved identifiers -
meaning it's necessary to avoid any indirection that would result in a
user-defined "add" macro being expanded.)  Whereas for existing
functions declaring long double functions is disabled if _LIBC in the
case where they alias double functions, to facilitate defining the
long double functions as aliases of the double ones, there is no such
logic for the narrowing functions in this patch.  Rather, the files
defining such functions are expected to use #define to hide the
original declarations of the alias names, to avoid errors about
defining aliases with incompatible types.

math/Makefile support is added for building the functions (listed in
libm-narrow-fns, currently empty) for all relevant pairs of types.  An
internal header math-narrow.h is added for macros shared between
multiple function implementations - currently a ROUND_TO_ODD macro to
facilitate writing functions using the round-to-odd implementation
approach, and alias macros to create all the required function
aliases.  libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128
are added for use when required (only for x86_64).  float128_private.h
support is added for ldbl-128 narrowing functions to be used for
_Float128.

Certain things are specifically omitted from this patch and the
immediate followups.  tgmath.h support is deferred; there remain
unresolved questions about how the type-generic macros for these
functions are supposed to work, especially in the case of arguments of
integer type.  The math.h / bits/mathcalls-narrow.h logic, and the
logic for determining what functions / aliases to define, will need
some adjustments to support the sqrt and fma functions, where
e.g. f32xsqrtf64 can just be an alias for sqrt rather than a separate
function.  TS 18661-1 defines FP_FAST_* macros but no support is
included for defining them (they won't in general be true without
architecture-specific optimized function versions).

For each of the function groups (add sub mul div sqrt fma) there are
always six functions present (e.g. fadd, faddl, daddl, f32addf64,
f32addf32x, f32xaddf64).  When _Float64x and _Float128 are supported,
there are seven more (e.g. f32addf64x, f32addf128, f64addf64x,
f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128).  In addition, in
the ldbl-opt case there are function names such as __nldbl_daddl (an
alias for f32xaddf64, which is not a reserved name in TS 18661-1, only
in TS 18661-3), for calls to daddl to be mapped to in the
-mlong-double-64 case.  (Calls to faddl just get mapped to fadd, and
for sqrt and fma there won't be __nldbl_* functions because dsqrtl and
dfmal can just be mapped to sqrt and fma with -mlong-double-64.)

While there are six or thirteen functions present in each group (plus
__nldbl_* names only as an ABI, not an API), not all are distinct;
they fall in various groups of aliases.  There are two distinct
versions built if long double has the same format as double; four if
they have distinct formats but there is no _Float64x or _Float128
support; five if long double has binary128 format; seven when
_Float128 is distinct from long double.

Architecture-specific optimized versions are possible, but not
included in my patches.  For example, IA64 generally supports
narrowing the result of most floating-point instructions; Power ISA
2.07 (POWER8) supports double values as arguments to float
instructions, with the results narrowed as expected; Power ISA 3
(POWER9) supports round-to-odd for float128 instructions, so meaning
that approach can be used without needing to set and restore the
rounding mode and test "inexact".  I intend to leave any such
optimized versions to the architecture maintainers.  Generally in such
cases it would also make sense for calls to these functions to be
expanded inline (given -fno-math-errno); I put a suggestion for TS
18661-1 built-in functions at <https://gcc.gnu.org/wiki/SummerOfCode>.

Tested for x86_64 (this patch in isolation, as well as testing for
various configurations in conjunction with further patches).

	* math/bits/mathcalls-narrow.h: New file.
	* include/bits/mathcalls-narrow.h: Likewise.
	* math/math-narrow.h: Likewise.
	* math/math.h (__MATHCALL_NARROW_ARGS_1): New macro.
	(__MATHCALL_NARROW_ARGS_2): Likewise.
	(__MATHCALL_NARROW_ARGS_3): Likewise.
	(__MATHCALL_NARROW_NORMAL): Likewise.
	(__MATHCALL_NARROW_REDIR): Likewise.
	(__MATHCALL_NARROW): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)]: Repeatedly include
	<bits/mathcalls-narrow.h> with _Mret_, _Marg_ and __MATHCALL_NAME
	defined.
	[__GLIBC_USE (IEC_60559_TYPES_EXT)]: Likewise.
	* math/Makefile (headers): Add bits/mathcalls-narrow.h.
	(libm-narrow-fns): New variable.
	(libm-narrow-types-basic): Likewise.
	(libm-narrow-types-ldouble-yes): Likewise.
	(libm-narrow-types-float128-yes): Likewise.
	(libm-narrow-types-float128-alias-yes): Likewise.
	(libm-narrow-types): Likewise.
	(libm-routines): Add narrowing functions.
	* sysdeps/i386/fpu/fenv_private.h [__x86_64__]
	(libc_feholdexcept_setroundf128): New macro.
	[__x86_64__] (libc_feupdateenv_testf128): Likewise.
	* sysdeps/ieee754/float128/float128_private.h: Include
	<math/math-narrow.h>.
	[libc_feholdexcept_setroundf128] (libc_feholdexcept_setroundl):
	Undefine and redefine.
	[libc_feupdateenv_testf128] (libc_feupdateenv_testl): Likewise.
	(libm_alias_float_ldouble): Undefine and redefine.
	(libm_alias_double_ldouble): Likewise.
 2018-02-09 21:18:52 +00:00
Zack Weinberg
63fb8f9aa9 Post-cleanup 2: minimize _G_config.h. 
Nearly everything in _G_config.h is either junk or more appropriately
defined elsewhere:

 * _G_fpos_t, _G_fpos64_t, and _G_BUFSIZ are already completely unused.
 * All remaining uses of _G_va_list have been changed to __gnuc_va_list.
 * The definition of _G_HAVE_ST_BLKSIZE/_IO_HAVE_ST_BLKSIZE has
   been inlined into its sole use.
 * The complete definition of _G_iconv_t has been moved to libio.h and
   renamed _IO_iconv_t (all actual users used that name).
 * _G_IO_IO_FILE_VERSION is vestigial; some code cares whether
   _IO_stdin_used exists, but nothing looks at its value.  I've
   preserved the value as a hardwired constant in csu/init.c.
   This means csu/init.c no longer needs to include anything.
 * Many of the headers included by _G_config.h were already being
   included directly by either either libio.h or stdio.h; the
   remaining ones were moved to libio.h.
 * _G_HAVE_MREMAP is still relevant, because mremap genuinely is a
   Linux extension; it's not in POSIX and as far as I can tell it's
   not available on the Hurd either.  I also preserved _G_HAVE_MMAP,
   since it's conceivable someone would want to port glibc to a
   MMU-less, mmap-less environment in the future.  Both are now always
   defined to 1/0 as is the current convention, instead of the older
   1/undef convention.  These are the only symbols still defined in
   _G_config.h.
 * The actual inclusion of _G_config.h moves from libio.h to libioP.h,
   as this is where a potential override of _G_HAVE_MMAP happens.
 * The #ifdef logic in libioP.h controlling _IO_JUMPS_OFFSET has been
   simplified.

After this patch, the only surviving _G_ symbols are the struct tag
names _G_fpos_t and _G_fpos64_t, which are preserved for the sake of
C++ mangled names in applications, and _G_HAVE_MMAP and _G_HAVE_MREMAP,
which do not seem worth renaming.

Installed stripped libraries are unchanged by this patch.

	* bits/_G_config.h: Move back to sysdeps/generic/_G_config.h.
	Delete all contents except for definitions of _G_HAVE_MMAP and
	_G_HAVE_MREMAP.  Add commentary explaining those two symbols.
	* sysdeps/unix/sysv/linux/bits/_G_config.h: Move back to
	sysdeps/unix/sysv/linux/_G_config.h.  Make same content
	change as above.

	* libio/libio.h: Don't include bits/_G_config.h here.
	Include stddef.h with __need_wchar_t defined.  Include
	bits/types/__mbstate_t.h, bits/types/wint_t.h, and gconv.h.
	Define _IO_iconv_t here, directly.
	Don't define _IO_HAVE_ST_BLKSIZE.
	* libio/libioP.h: Include _G_config.h here.  Move include of
	shlib-compat.h up with rest of includes.  Simplify conditionals
	controlling definition of _IO_JUMPS_OFFSET.

	* csu/init.c: Remove always-true #if around entire file.
	Don't include stdio.h.  Set _IO_stdin_used to hardwired
	constant 0x20001, and update commentary.
	* include/stdio.h, sysdeps/ieee754/ldbl-opt/nldbl-compat.h:
	Replace all uses of _G_va_list with __gnuc_va_list.
	* libio/filedoalloc.c: Use #if defined _STATBUF_ST_BLKSIZE
	instead of #if _IO_HAVE_ST_BLKSIZE.
	* libio/fileops.c: Test _G_HAVE_MREMAP with #if, not #ifdef.
	* libio/iofdopen.c, libio/iofopen.c: Test _G_HAVE_MMAP with #if,
	not #ifdef.
 2018-02-07 10:10:32 -05:00
Wilco Dijkstra
b7c83ca30e Remove slow paths from log 
Remove the slow paths from log.  Like several other double precision math
functions, log is exactly rounded.  This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP.  Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.

Interestingly removing the slow paths makes hardly any difference in practice:
the worst case error is still ~0.502ULP, and exp(log(x)) shows identical results
before/after on many millions of random cases.  All GLIBC math tests pass on
AArch64 and x64 with no change in ULP error.  A simple test over a few hundred
million values shows log is now 18% faster on average.

	* manual/probes.texi (slowlog): Delete documentation of removed probe.
	(slowlog_inexact): Likewise
	* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Remove slow paths.
	* sysdeps/ieee754/dbl-64/ulog.h: Remove unused declarations.
 2018-02-07 12:24:43 +00:00
Joseph Myers
6f9a3dd8b8 Move LDBL_CLASSIFY_COMPAT to its own header. 
The general rule in glibc is that it's better for a macro to be always
defined, and tested with #if, than for it to be tested with #ifdef,
because the latter is prone to typos in the macro name as well as to
the header with the macro accidentally not being included in a file
testing it.  (Testing with an "if" statement is even better, in those
cases where it's possible to do things that way, as it then means both
cases in the code get checked for syntax in glibc builds with either
value of the condition.)

math_private.h has several different groups of macros, meaning that
architectures wanting to override some of them need to define those
then include the generic version, which then defines macros if not
already defined.  It's hard to avoid that arrangement completely, but
various cases can be improved by splitting out macros or groups of
macros into separate files.

This patch splits out the LDBL_CLASSIFY_COMPAT macro into a separate
ldbl-classify-compat.h header.  This macro is tested with #ifdef; this
patch changes it to testing with #if, with a default definition to 0
in the generic header and then architecture-specific headers defining
it to 1.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.

	* sysdeps/generic/ldbl-classify-compat.h: New file.
	* sysdeps/arm/ldbl-classify-compat.h: Likewise.
	* sysdeps/m68k/coldfire/ldbl-classify-compat.h: Likewise.
	* sysdeps/microblaze/ldbl-classify-compat.h: Likewise.
	* sysdeps/mips/ldbl-classify-compat.h: Likewise.
	* sysdeps/nios2/ldbl-classify-compat.h: Likewise.
	* sysdeps/sh/ldbl-classify-compat.h: Likewise.
	* sysdeps/ieee754/dbl-64/s_finite.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/s_isinf.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/s_isnan.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Include
	<ldbl-classify-compat.h>.
	[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
	* sysdeps/arm/math_private.h (LDBL_CLASSIFY_COMPAT): Remove macro.
	* sysdeps/mips/math_private.h (LDBL_CLASSIFY_COMPAT): Likewise.
	* sysdeps/m68k/coldfire/math_private.h: Remove file.
	* sysdeps/microblaze/math_private.h: Likewise.
	* sysdeps/nios2/math_private.h: Likewise.
	* sysdeps/sh/math_private.h: Likewise.
 2018-02-01 21:01:00 +00:00
Carlos O'Donell
f1d7368196 Fix -Os log1p, log1pf build (bug 21314). 
As reported in bug 21314, building log1p and log1pf fails with -Os
because of a spurious -Wmaybe-uninitialized warning (reported there
for GCC 5 for MIPS, I see it also with GCC 7 for x86_64).  This patch,
based on the patches in the bug, fixes this using the DIAG_* macros.

Tested for x86_64 with -Os that this eliminates those warnings and so
allows the build to progress further.

2018-02-01  Carlos O'Donell  <carlos@redhat.com>
	    Ramin Seyed-Moussavi  <lordrasmus@gmail.com>
	    Joseph Myers  <joseph@codesourcery.com>

	[BZ #21314]
	* sysdeps/ieee754/dbl-64/s_log1p.c: Include <libc-diag.h>.
	(__log1p): Disable -Wmaybe-uninitialized for -Os around
	computation using c.
	* sysdeps/ieee754/flt-32/s_log1pf.c: Include <libc-diag.h>.
	(__log1pf): Disable -Wmaybe-uninitialized for -Os around
	computation using c.
 2018-02-01 20:40:48 +00:00
Joseph Myers
b303185df9 Fix ldbl-128ibm log1pl (-qNaN) spurious "invalid" exception (bug 22693). 
The ldbl-128ibm implementation of log1pl does ordered comparisons on a
negative qNaN argument, so resulting in spurious "invalid" exceptions
(for soft-float powerpc; hard-float only avoids this because of GCC
bug 58684 meaning ordered comparison instructions never get
generated).  This patch fixes this by arranging for the test for NaN
or infinity arguments to handle negative arguments as well.

Tested for powerpc (soft float).

	[BZ #22693]
	* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Handle
	negative arguments in test for NaN or infinity argument.
 2018-01-10 17:59:01 +00:00
Joseph Myers
1272748886 Fix ldbl-128ibm lrintl, lroundl missing "invalid" exceptions (bug 22690). 
The ldbl-128ibm implementations of lrintl and lroundl are missing
"invalid" exceptions for certain overflow cases when compiled with GCC
8.  The cause of this is after-the-fact integer overflow checks that
fail when the compiler optimizes on the basis of integer overflow
being undefined; GCC 8 must be able to detect new cases of
undefinedness here.

Failure: lrint (-0x80000001p0): Exception "Invalid operation" not set
Failure: lrint_downward (-0x80000001p0): Exception "Invalid operation" not set
Failure: lrint_towardzero (-0x80000001p0): Exception "Invalid operation" not set
Failure: lrint_upward (-0x80000001p0): Exception "Invalid operation" not set

Failure: lround (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround_downward (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround_towardzero (-0x80000001p0): Exception "Invalid operation" not set
Failure: lround_upward (-0x80000001p0): Exception "Invalid operation" not set

(Tested that these failures occur before the patch for powerpc
soft-float, but the issue applies in principle for hard-float as well,
whether or not the particular optimizations in fact occur there at
present.)

This patch fixes the bug by ensuring the additions / subtractions in
question cast arguments to unsigned long int, or use 1UL as a constant
argument, so that the arithmetic occurs in an unsigned type with the
result then converted back to a signed type.

Tested for powerpc (soft-float).

	[BZ #22690]
	* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c (__lrintl): Use unsigned
	long int for arguments of possibly overflowing addition or
	subtraction.
	* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c (__lroundl): Likewise.
 2018-01-10 00:02:35 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights. 
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
 2018-01-01 00:32:25 +00:00
Bernd Edlinger
648615e13f Avoid signed shift overflow in pow (bug 21309). 
As noted in bug 21309, dbl-64/e_pow.c contains signed int shifts that,
although the shift count is in the range [0, 31], shift bits into and
beyond the sign bit and so are undefined in ISO C.  Although this is
defined in GNU C, this patch from the bug cleans up the code to avoid
those shifts.

Tested for x86_64.

	[BZ #21309]
	* sysdeps/ieee754/dbl-64/e_pow.c (checkint): Make m and n
	unsigned.
 2017-12-19 18:41:01 +00:00
Joseph Myers
f1e005022e Revert exp reimplementation (causes test failures). 
Revert:

	2017-12-19  Joseph Myers  <joseph@codesourcery.com>

	* sysdeps/x86_64/fpu/libm-test-ulps: Update.

	2017-12-19  Patrick McGehearty  <patrick.mcgehearty@oracle.com>

	* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
	<errno.h>.  Include "eexp.tbl".
	(half): New constant.
	(one): Likewise.
	(__ieee754_exp): Rewrite.
	(__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
	* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
	* sysdeps/i386/fpu/slowexp.c: Likewise.
	* sysdeps/ia64/fpu/slowexp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
	* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
	comment.
	* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
	(CPPFLAGS-slowexp.c): Remove variable.
	* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
	Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
	(CFLAGS-slowexp-fma.c): Remove variable.
	(CFLAGS-slowexp-fma4.c): Likewise.
	(CFLAGS-slowexp-avx.c): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
	define as macro.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
	* math/Makefile (type-double-routines): Remove slowexp.
	* manual/probes.texi (slowexp_p6): Remove.
	(slowexp_p32): Likewise.
 2017-12-19 18:11:37 +00:00
Patrick McGehearty
6fd0a3c6a8 Improve __ieee754_exp() performance by greater than 5x on sparc/x86. 
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.

Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).

Using the glibc perf tests on sparc,
      sparc (nsec)    x86 (nsec)
      old     new     old     new
max   17629   395    5173     144
min     399    54      15      13
mean   5317   200    1349      23

The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.

Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0)  (-1.46113312244415283203125)
 new code:    2.31973271630014299393707e-01   0x1.db14cd799387ap-3
 old code:    2.31973271630014271638132e-01   0x1.db14cd7993879p-3
    exp    =  2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp

In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes.  For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures.  I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.

	* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
	<errno.h>.  Include "eexp.tbl".
	(half): New constant.
	(one): Likewise.
	(__ieee754_exp): Rewrite.
	(__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
	* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
	* sysdeps/i386/fpu/slowexp.c: Likewise.
	* sysdeps/ia64/fpu/slowexp.c: Likewise.
	* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
	* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
	* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
	* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
	comment.
	* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
	(CPPFLAGS-slowexp.c): Remove variable.
	* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
	Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
	(CFLAGS-slowexp-fma.c): Remove variable.
	(CFLAGS-slowexp-fma4.c): Likewise.
	(CFLAGS-slowexp-avx.c): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
	define as macro.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
	* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
	* math/Makefile (type-double-routines): Remove slowexp.
	* manual/probes.texi (slowexp_p6): Remove.
	(slowexp_p32): Likewise.
 2017-12-19 17:27:31 +00:00
Rajalakshmi Srinivasaraghavan
984ae9967b New generic sincosf 
This implementation is based on generic s_sinf.c and s_cosf.c.
Tested on s390x, powerpc64le and powerpc32.
 2017-12-16 14:01:37 +05:30
Joseph Myers
6f7c009282 Add sysdeps/ieee754/soft-fp. 
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd.  Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.

At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them.  In general this means such a
configuration has its own s_fma.c and s_fmaf.c.

TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type.  These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves.  (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)

So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes.  Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.

Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp.  This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations.  A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).

This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.

(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.

	* soft-fp/fmadf4.c: Move to ....
	* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
	* soft-fp/fmasf4.c: Move to ....
	* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
	* soft-fp/fmatf4.c: Move to ....
	* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
	* sysdeps/ieee754/soft-fp/Makefile: New file.
	* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
	* sysdeps/arm/preconfigure: Regenerated.
	* sysdeps/arm/nofpu/Implies: New file.
	* sysdeps/arm/s_fma.c: Remove file.
	* sysdeps/arm/s_fmaf.c: Likewise.
	* sysdeps/m68k/coldfire/nofpu/Implies: New file.
	* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
	* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
	* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
	* sysdeps/microblaze/s_fma.c: Remove file.
	* sysdeps/microblaze/s_fmaf.c: Likewise.
	* sysdeps/mips/mips32/nofpu/Implies: New file.
	* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
	* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
	* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
	* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
	* sysdeps/mips/ieee754/s_fma.c: Remove file.
	* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
	* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
	implementation.
	* sysdeps/nios2/Implies: Add ieee754/soft-fp.
	* sysdeps/nios2/s_fma.c: Remove file.
	* sysdeps/nios2/s_fmaf.c: Likewise.
	* sysdeps/sh/nofpu/Implies: New file.
	* sysdeps/sh/s_fma.c: Remove file.
	* sysdeps/sh/s_fmaf.c: Likewise.
	* sysdeps/tile/Implies: Add ieee754/soft-fp.
	* sysdeps/tile/s_fma.c: Remove file.
	* sysdeps/tile/s_fmaf.c: Likewise.
 2017-12-12 23:35:21 +00:00
Paul Clarke
f4b2aea6e1 New generic cosf 
The same logic used in s_cosf.S version for x86 and powerpc
is used to create a generic s_cosf.c, so there is no performance
improvement in x86_64 and powerpc64.

	* sysdeps/ieee754/flt-32/s_cosf.c: New implementation.
 2017-12-11 17:39:42 -02:00
Joseph Myers
1dbe6f64ab Don't make local variables static in ldbl-96 j1l. 
The ldbl-96 implementation of j1l has some function-local variables
that are declared static for no apparent reason (this dates back to
the first addition of that file).

Any vaguely recent compiler, probably including any that are supported
for building glibc, optimizes away the "static" here, as the values of
the variables on entry to the function are dead.  So there is not
actually a user-visible bug here at present (but with any compilers
that didn't optimize away the static at all, possibly building with
less or no optimization, so that the function stored intermediate
values to and then loaded them from the variables, there would have
been a thread-safety issue).  But the "static" clearly doesn't belong
there and might potentially make things unsafe were compilation
without optimization to be supported in future, so this patch removes
it.

Tested for x86_64.

	* sysdeps/ieee754/ldbl-96/e_j1l.c (qone): Don't make local
	variables static.
 2017-12-06 15:19:06 +00:00
Joseph Myers
53994f1263 Make some ldbl-128, ldbl-128ibm arrays const. 
I noticed that an x86_64 build of libm unexpectedly contained more
non-constant data than an older version (before _Float128 support)
did.  The problem is non-const arrays in the ldbl-128 j0l and j1l
implementations; this patch makes those arrays, and the corresponding
ldbl-128ibm ones, const.

Tested for x86_64, and tested compilation for powerpc with
build-many-glibcs.py.

	* sysdeps/ieee754/ldbl-128/e_j0l.c (Y0_2N): Make const.
	(Y0_2D): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (Y0_2N): Likewise.
	(Y0_2D): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (Y0_2N): Likewise.
	(Y0_2D): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (Y0_2N): Likewise.
	(Y0_2D): Likewise.
 2017-12-06 13:42:58 +00:00
Adhemerval Zanella
94d80dfc73 math: Use sign as double for reduced case in sinf 
This patch avoid an extra floating point to integer conversion in
reduced internal function for generic sinf by defining the sign as
double instead of integers.

There is no much difference on Haswell with GCC 7.2.1:

           Before        After
min          9.11        9.108
mean       21.982      21.9224

However H.J. Lu reported gains on Skylake:

Before:

  "sinf": {
   "": {
    "duration": 3.4044e+10,
    "iterations": 1.9942e+09,
    "max": 141.106,
    "min": 7.704,
    "mean": 17.0715
   }
  }

After:

  "sinf": {
   "": {
    "duration": 3.40665e+10,
    "iterations": 2.03199e+09,
    "max": 95.994,
    "min": 7.704,
    "mean": 16.765
   }
  }

Checked on x86_64-linux-gnu.

	* sysdeps/ieee754/flt-32/s_sinf.c (ones): Define as double.
	(reduced): Use ones as double instead of integer.
 2017-12-05 16:27:44 -02:00
Szabolcs Nagy
00d54af7c8 [PATCH] fix sinf(NAN) 
sinf(NAN) should not signal invalid fp exception
so use isless instead of < where NAN is compared.

this makes the sinf tests pass on aarch64.

	* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Use isless.
 2017-12-05 18:09:22 +00:00
Joseph Myers
f2d64d621e Support _Float64, _Float32x in libm_alias_double. 
This patch makes the libm_alias_double macros support creating
_Float64 and _Float32x aliases, in preparation for enabling glibc
support for those types.

Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.

	* sysdeps/generic/libm-alias-double.h: Include <bits/floatn.h>.
	(libm_alias_double_other_r_f64): New macro.
	(libm_alias_double_other_r_f32x): Likewise.
	(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
	libm_alias_double_other_r_f32x.
	(libm_alias_double_r): Use semicolon before call to
	libm_alias_double_other_r.
	* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Include
	<bits/floatn.h>.
	(libm_alias_double_other_r_f64): New macro.
	(libm_alias_double_other_r_f32x): Likewise.
	(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
	libm_alias_double_other_r_f32x.
 2017-12-05 17:00:57 +00:00
H.J. Lu
91c318e7b9 s_sinf.c: Replace floor with simple casts 
Since s_sinf.c either assigns the return value of floor to integer or
passes double converted from integer to floor, this patch replaces
floor with simple casts.

Also since long == int for 32-bit targets, we can use long instead of
int to avoid 64-bit integer for 64-bit targets.

On Skylake, bench-sinf reports performance improvement:

           Before        After         Improvement
max        130.566       129.564           30%
min        7.704         7.706             0%
mean       21.8188       19.1363           30%

	* sysdeps/ieee754/flt-32/s_sinf.c (reduced): Replace long with
	int.
	(SINF_FUNC): Likewise.  Replace floor with simple casts.
 2017-12-05 08:47:27 -08:00
Joseph Myers
73895b499b Use __floor not floor in sinf. 
The new sinf implementation introduced localplt failures for all
platforms where the compiler did not inline the calls to floor
(converted to trunc by machine-independent optimizations).  This patch
changes the calls to use __floor as normal in libm.

We can't use the public function names floor / floorf / floorl /
floorf128 in libm code in the absence of appropriate asms to redirect
floor/trunc calls, if not inlined, to use the internal names instead
(while avoiding breaking code building the floor functions themselves)
- while having such asms and then calling the public functions
unconditionally would be desirable for optimization (few architectures
have __floor inlines in math_private.h, and once the built-in function
is used you don't need them), using __floor is the minimum safe fix
for the present test regressions.

Tested with build-many-glibcs.py that this fixes the localplt test
failure for arm-linux-gnueabi.

	* sysdeps/ieee754/flt-32/s_sinf.c (SINF_FUNC): Use __floor instead
	of floor.
 2017-12-04 16:58:08 +00:00
Rajalakshmi Srinivasaraghavan
7863a71181 New generic sinf 
This implementation is based on optimized sinf assembly versions
of x86_64 and powerpc.
 2017-12-04 10:12:10 +05:30
Joseph Myers
d812486444 Support ldbl-opt libm_alias_double use from .S files. 
This patch makes the ldbl-opt libm_alias_double implementation support
use from .S sources, by adding a semicolon after its use of
weak_alias.

Tested (compilation only) with build-many-glibcs.py for
alpha-linux-gnu, in conjunction with a patch introducing uses of
libm_alias_double in alpha .S files.

	* sysdeps/ieee754/ldbl-opt/libm-alias-double.h
	(libm_alias_double_r): Add semicolon after weak_alias call.
 2017-11-28 00:01:11 +00:00
Joseph Myers
a23aa5b727 Add _Float64x function aliases. 
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support.  (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.)  The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3.  As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.

Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines.  The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27.  The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.

A libm-test-ulps update for x86 is included.  This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types.  GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.

Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.

	* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
	* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
	Likewise.
	* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
	Likewise.
	* sysdeps/x86/Makeconfig: New file.
	* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* bits/floatn.h (__HAVE_FLOAT64X): New macro.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
	Likewise.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
	(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
	* manual/math.texi (Mathematics): Document support for _Float64x.
	* math/Versions (GLIBC_2.27): Add _Float64x functions.
	* stdlib/Versions (GLIBC_2.27): Likewise.
	* wcsmbs/Versions (GLIBC_2.27): Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
 2017-11-27 14:16:47 +00:00
Joseph Myers
de61465c04 Use libm_alias_float128 more in sysdeps/ieee754/float128. 
This patch uses libm_alias_float128 in place of weak_alias more in
sysdeps/ieee754/float128, in preparation for defining _Float64x
aliases when appropriate.

Tested for x86_64, and for powerpc64le (compilation only) with
build-many-glibcs.py in conjunction with _Float64x support patches.

	* sysdeps/ieee754/float128/s_fromfpf128.c (fromfpf128): Define
	using libm_alias_float128.
	* sysdeps/ieee754/float128/s_fromfpxf128.c (fromfpxf128):
	Likewise.
	* sysdeps/ieee754/float128/s_setpayloadf128.c (setpayloadf128):
	Likewise.
	* sysdeps/ieee754/float128/s_setpayloadsigf128.c
	(setpayloadsigf128): Likewise.
	* sysdeps/ieee754/float128/s_ufromfpf128.c (ufromfpf128):
	Likewise.
	* sysdeps/ieee754/float128/s_ufromfpxf128.c (ufromfpxf128):
	Likewise.
 2017-11-24 23:53:54 +00:00
Joseph Myers
6e70d156c7 Support _Float64x in libm_alias macros. 
This patch adds support for libm_alias_ldouble and libm_alias_float128
to create *f64x function aliases when appropriate.

Making such aliases work for functions defined in assembly sources
requires adding some semicolons after weak_alias calls in alias macro
definitions.  For C, semicolons are already present in the macros
called when required, but a GNU C extension allows excess semicolons
at file scope in a source file (and glibc already uses this), so it is
OK to have extra semicolons present in the macro definitions.  For
assembly sources, making multiple alias macro calls from a single
macro expansion means there are no newlines between the calls, so an
explicit separator is needed.  If hppa were to have .S sources in
libm, a more complicated approach would be needed that used
ASM_LINE_SEP when building assembly sources but not for C, but right
now there are no such sources so just using a semicolon (as already
present unconditionally in some such macro expansions) suffices.

Tested for x86_64, including in conjunction with _Float64x support
patches.

	* sysdeps/generic/libm-alias-float128.h: Include <bits/floatn.h>.
	(libm_alias_float128_other_r): If
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE], define f64x
	alias.
	(libm_alias_float128_r): Add semicolon after weak_alias call.
	* sysdeps/generic/libm-alias-ldouble.h
	(libm_alias_ldouble_other_r_f128): New macro.
	(libm_alias_ldouble_other_r_f64x): Likewise.
	(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
	and libm_alias_ldouble_other_r_f64x.
	(libm_alias_ldouble_r): Add semicolon after weak_alias call.
	* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h
	(libm_alias_ldouble_other_r_f128): New macro.
	(libm_alias_ldouble_other_r_f64x): Likewise.
	(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
	and libm_alias_ldouble_other_r_f64x.
 2017-11-24 23:33:14 +00:00
Joseph Myers
df2806cdb5 Support strfromf64x alias. 
This patch adds support for defining strfromf64x as a function alias
(of strfroml or strfromf128, as appropriate) when _Float64x is
supported.

Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.

	* stdlib/strfroml.c: Always include <stdlib.h>.
	[__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x): Define and later
	undefine as macro and define as weak alias.
	* sysdeps/ieee754/float128/strfromf128.c: Include <bits/floatn.h>.
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE]: Include
	<stdlib.h>.
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x):
	Define and later undefine as macro and define as weak alias.
 2017-11-24 23:12:30 +00:00
Joseph Myers
0df4fe3557 Support strtof64x, wcstof64x aliases. 
This patch adds support for defining strtof64x, strtof64x_l, wcstof64
and wcstof64x_l function aliases when _Float64x is supported.

Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.

	* stdlib/strtold.c [__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
	Define and later undefine as macro.  Define as weak alias if
	[!USE_WIDE_CHAR].
	[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x): Define and later
	undefine as macro.  Define as weak alias if [USE_WIDE_CHAR].
	* sysdeps/ieee754/float128/strtof128.c: Include <bits/floatn.h>.
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
	Define and later undefine as macro.  Define as weak alias if
	[!USE_WIDE_CHAR].
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x):
	Define and later undefine as macro.  Define as weak alias if
	[USE_WIDE_CHAR].
	* sysdeps/ieee754/float128/strtof128_l.c
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l):
	Define and later undefine as macro.  Define as weak alias if
	[!USE_WIDE_CHAR].
	[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l):
	Define and later undefine as macro.  Define as weak alias if
	[USE_WIDE_CHAR].
	* sysdeps/ieee754/ldbl-128/strtold_l.c
	[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
	undefine as macro.  Define as weak alias if [!USE_WIDE_CHAR].
	[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
	undefine as macro.  Define as weak alias if [USE_WIDE_CHAR].
	* sysdeps/ieee754/ldbl-64-128/strtold_l.c
	[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
	undefine as macro.  Define as weak alias if [!USE_WIDE_CHAR].
	[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
	undefine as macro.  Define as weak alias if [USE_WIDE_CHAR].
	* sysdeps/ieee754/ldbl-96/strtold_l.c
	[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
	undefine as macro.  Define as weak alias if [!USE_WIDE_CHAR].
	[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
	undefine as macro.  Define as weak alias if [USE_WIDE_CHAR].
 2017-11-24 22:51:53 +00:00
Joseph Myers
015c6dc288 Support bits/floatn.h inclusion from .S files. 
Further _FloatN / _FloatNx type alias support will involve making
architecture-specific .S files use the common macros for libm function
aliases.  Making them use those macros will also serve to simplify
existing code for aliases / symbol versions in various cases, similar
to such simplifications for ldbl-opt code.

The libm-alias-*.h files sometimes need to include <bits/floatn.h> to
determine which aliases they should define.  At present, this does not
work for inclusion from .S files because <bits/floatn.h> can define
typedefs for old compilers.  This patch changes all the
<bits/floatn.h> and <bits/floatn-common.h> headers to include
__ASSEMBLER__ conditionals.  Those conditionals disable everything
related to C syntax in the __ASSEMBLER__ case, not just the problem
typedefs, as that seemed cleanest.  The __HAVE_* definitions remain in
the __ASSEMBLER__ case, as those provide information that is required
to define the correct set of aliases.

Tested with build-many-glibcs.py for a representative set of
configurations (x86_64-linux-gnu i686-linux-gnu ia64-linux-gnu
powerpc64le-linux-gnu mips64-linux-gnu-n64 sparc64-linux-gnu) with GCC
6.  Also tested with GCC 6 for i686-linux-gnu in conjunction with
changes to use alias macros in .S files.

	* bits/floatn-common.h [!__ASSEMBLER]: Disable everything related
	to C syntax instead of availability and properties of types.
	* bits/floatn.h [!__ASSEMBLER]: Likewise.
	* sysdeps/ia64/bits/floatn.h [!__ASSEMBLER]: Likewise.
	* sysdeps/ieee754/ldbl-128/bits/floatn.h [!__ASSEMBLER]: Likewise.
	* sysdeps/mips/ieee754/bits/floatn.h [!__ASSEMBLER]: Likewise.
	* sysdeps/powerpc/bits/floatn.h [!__ASSEMBLER]: Likewise.
	* sysdeps/x86/bits/floatn.h [!__ASSEMBLER]: Likewise.
 2017-11-17 22:01:43 +00:00
Joseph Myers
797ba44ba2 Add bits/floatn.h defines for more _FloatN / _FloatNx types. 
The bits/floatn.h header currently only has defines relating to
_Float128.  This patch adds defines relating to other _FloatN /
_FloatNx types.

The approach taken is to add defines for all _FloatN / _FloatNx types
known to GCC, and to put them in a common bits/floatn-common.h header
included at the end of all the individual bits/floatn.h headers.  If
in future some defines become different for different glibc
configurations, they will move out into the separate bits/floatn.h
headers.

Some defines are expected always to be the same across glibc ports.
Corresponding defines are nevertheless put in this header.  The intent
is that where there are conditionals (in headers or in non-installed
files) that can just repeat the same or nearly the same logic for each
floating-point type, they should do so, even if in fact the cases for
some types could be unconditionally present or absent because the same
conditionals are true or false for all glibc configurations.  This
should make the glibc code with such conditionals easier to read,
because the reader can just see that the same conditionals are
repeated for each type, rather than seeing different conditionals for
different types and needing to reason, at each location with such
differences, why those differences are indeed correct there.  (Cases
involving per-format rather than per-type logic are more likely still
to need differences in how they handle different types.)

Having such defines and conditionals also helps in incremental
preparation for adding _Float32 / _Float64 / _Float32x / _Float64x
function aliases.  I intend subsequent patches to add such
conditionals corresponding to those already present for _Float128, as
well as making more architecture-specific function implementations use
common macros to define aliases in preparation for adding such _FloatN
/ _FloatNx aliases.

Tested for x86_64.

	* bits/floatn-common.h: New file.
	* math/Makefile (headers): Add bits/floatn-common.h.
	* bits/floatn.h: Include <bits/floatn-common.h>.
	* sysdeps/ia64/bits/floatn.h: Likewise.
	* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
	* sysdeps/mips/ieee754/bits/floatn.h: Likewise.
	* sysdeps/powerpc/bits/floatn.h: Likewise.
	* sysdeps/x86/bits/floatn.h: Likewise.
 2017-10-20 21:42:51 +00:00
Joseph Myers
81325b12b1 Add _Float128 function aliases. 
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility).  This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3.  All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).

The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.

Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.

	* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
	* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
	* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
	* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
	(libm_alias_ldouble_other_r): Also create _Float128 alias.
	* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
	<bits/floatn.h>.
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
	(libm_alias_ldouble_other_r): Also create _Float128 alias.
	* manual/math.texi (Mathematics): Document additional architecture
	support for _Float128.
	* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
 2017-10-18 17:37:18 +00:00
Joseph Myers
c38a4bfd59 Move some float128 symbol version definitions. 
With support for _Float128 functions on platforms where that type has
the same ABI as long double, as well as on platforms where it is
ABI-distinct, those functions will need to be exported from glibc's
shared libraries at appropriate symbol versions in each case.

This patch avoids duplication of lists of symbols to export by moving
the symbols other than __* to math/Versions and stdlib/Versions.
There, they are conditional on <float128-abi.h> defining
FLOAT128_VERSION and a default version of that header is added that
does not define that macro.  Enabling the float128 function aliases
will then include adding a sysdeps/ieee754/ldbl-128/float128-abi.h
that defines FLOAT128_VERSION to GLIBC_2.27.  Symbols __* remain in
sysdeps/ieee754/float128/Versions; those symbols should be present
only once per floating-point format, not once per type.

Note that if any platforms currently lacking support for a type with
binary128 format get glibc support for such a type in future (whether
only as _Float128, or also as a new long double format), and new libm
functions (present for all types) have been added by then, additional
macros will be needed to allow such functions to get a version of the
form "GLIBC_2.28 if the platform had _Float128 support by then, or the
later version at which that platform had _Float128 support added".
This is not however a preexisting condition, but would have applied
equally to the existing support for _Float128 as an ABI-distinct
type.  New all-type libm functions should just be added to the
appropriate symbol version (currently GLIBC_2.27) for all types, with
such special-case handling for _Float128 versions (and _Float64x as
well in future) waiting until someone actually wants to add support
for _Float128 to an existing platform after a release in which that
platform and a post-2.26 libm function had support but that platform
lacked _Float128 support.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.  Also tested in conjunction
with the remaining changes to enable float128 aliases.

	* sysdeps/generic/float128-abi.h: New file.
	* sysdeps/ieee754/float128/Versions (FLOAT128_VERSION): Move
	non-__prefixed symbols to ....
	* math/Versions: ... here.  Include <float128-abi.h>.
	* stdlib/Versions ... and here.  Include <float128-abi.h>
 2017-10-16 22:04:42 +00:00
Joseph Myers
02010e79ce Support strtof128 etc. aliases. 
This patch adds support for building strtof128, wcstof128, strtof128_l
and wcstof128_l as aliases, in the case of __HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.  Also tested together with
changes to enable float128 aliases.

	* stdlib/strtold.c: Include <bits/floatn.h>
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128): Define
	and later undefine as macro.  Define as weak alias if
	[!USE_WIDE_CHAR].
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128): Define
	and later undefine as macro.  Define as weak alias if
	[USE_WIDE_CHAR].
	* sysdeps/ieee754/ldbl-128/strtold_l.c [__HAVE_FLOAT128 &&
	!__HAVE_DISTINCT_FLOAT128] (strtof128_l): Define and later
	undefine as macro.  Define as weak alias if [!USE_WIDE_CHAR].
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
	Define and later undefine as macro.  Define as weak alias if
	[USE_WIDE_CHAR].
	* sysdeps/ieee754/ldbl-64-128/strtold_l.c: Include
	<bits/floatn.h>.
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128_l):
	Define and later undefine as macro.  Define as weak alias if
	[!USE_WIDE_CHAR].
	[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
	Define and later undefine as macro.  Define as weak alias if
	[USE_WIDE_CHAR].
 2017-10-16 13:22:11 +00:00
Joseph Myers
f8718a9e16 Use libm_alias_ldouble_other in ldbl-64-128/s_nextafterl.c. 
This patch makes ldbl-64-128/s_nextafterl.c restore the default
weak_alias definition and use libm_alias_ldouble_other (having
undefined and redefined weak_alias for the include of
ldbl-128/s_nextafterl.c, so the libm_alias_ldouble use in the latter
file is ineffective).

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.  Also tested together with
changes to enable float128 aliases.

	* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c (weak_alias):
	Undefine and restore default definition.  Use
	libm_alias_ldouble_other.
 2017-10-13 23:05:15 +00:00
Joseph Myers
1def91b304 Fix ldbl-opt/w_lgamma_compatl.c libm_alias_ldouble_other usage. 
Testing with changes to enable _Float128 function aliases shows that
the libm_alias_ldouble_other usage in ldbl-opt/w_lgamma_compatl.c does
not in fact work.  Furthermore, it is unnecessary; the relevant
aliases get created through w_lgammal_compat2.c.  This patch removes
the problem code.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.  Also tested in conjunction with
patches to enable _Float128 function aliases.

	* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c [BUILD_LGAMMA]:
	Remove conditional code.
 2017-10-13 16:38:37 +00:00
Joseph Myers
7d25d410c2 Fix ldbl-opt/s_clog10l.c libm_alias_ldouble_other usage. 
Testing with changes to enable _Float128 function aliases shows that
the libm_alias_ldouble_other usage in ldbl-opt/s_clog10l.c does not in
fact work, because __clog10l is defined with long_double_symbol rather
than as a normal C alias.  This patch fixes this by renaming the
__clog10l__internal alias (not strictly necessary, but avoids a hack
with "__clog10l_interna" / "__clog10l__interna" as first argument to
libm_alias_ldouble_other) and using the renamed alias when calling
libm_alias_ldouble_other.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanges by the patch.  Also tested in conjunction with
patches to enable _Float128 function aliases.

	* sysdeps/ieee754/ldbl-opt/s_clog10l.c (__clog10l__internal):
	Rename to __clog10_internal_l.
	(__clog10_internal_l): Define aliases using
	libm_alias_ldouble_other instead of using libm_alias_ldouble_other
	with __clog10.
 2017-10-13 16:36:45 +00:00
Joseph Myers
0ff64d3a18 Use generic alias macros in ldbl-opt. 
This patch fixes ldbl-opt code to use generic libm alias macros in
preparation for getting _FloatN / _FloatNx aliases where appropriate.

Four functions are affected, that undefine and redefine alias macros
before including the implementations they wrap in such a way that
_FloatN / _FloatNx aliases would not appear.  s_clog10l.c undefines
and redefined declare_mgen_alias, so just needs a
libm_alias_ldouble_other call added.  w_exp10l_compat.c undefines and
redefines weak_alias, but in fact does not need to do so, since
math/w_exp10l_compat.c uses libm_alias_ldouble and does not use
weak_alias other than through that, so the undefines and redefines of
weak_alias are removed.  w_lgamma_compatl.c and w_remainderl_compat.c
are made to use libm_alias_ldouble_other in conjunction with restoring
the original definition of weak_alias so this is effective.

Tested with build-many-glibcs.py.  Installed stripped shared libraries
are unchanged by this patch.

	* sysdeps/ieee754/ldbl-opt/s_clog10l.c: Use
	libm_alias_ldouble_other.
	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (weak_alias): Do not
	undefine and redefine.
	[LIBM_SVID_COMPAT && !LONG_DOUBLE_COMPAT (libm, GLIBC_2_1)]
	(exp10l): Do not define here.
	* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c [BUILD_LGAMMA]
	(weak_alias): Undefine and redefine.
	[BUILD_LGAMMA]: Use libm_alias_ldouble_other.
	* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c
	[LIBM_SVID_COMPAT] (weak_alias): Undefine and redefine here.
	[LIBM_SVID_COMPAT]: Use libm_alias_ldouble_other.
 2017-10-11 02:51:39 +00:00
Joseph Myers
24b6515d87 Add libm_alias_*_other_r macros. 
Some libm functions are unable to use the generic alias macros such as
libm_alias_double because they have special symbol versioning
requirements for the main float, double or long double public names.

To facilitate adding _FloatN / _FloatNx function aliases in future,
it's still desirable to have generic macros those functions can use as
far as possible.  This patch adds macros such as
libm_alias_double_other, which only define names for _FloatN /
_FloatNx aliases, not for float / double / long double.  As present,
all these new macros do nothing, but they are called in the
appropriate places in macros such as libm_alias_double.  This patch
also arranges for lgamma implementations, and the recently added
optimized float function implementations, to use the new macros to
make them ready for addition of _FloatN / _FloatNx aliases.

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.

	* sysdeps/generic/libm-alias-double.h (libm_alias_double_other_r):
	New macro.
	(libm_alias_double_other): Likewise.
	(libm_alias_double_r): Use libm_alias_double_other_r.
	* sysdeps/generic/libm-alias-float.h (libm_alias_float_other_r):
	New macro.
	(libm_alias_float_other): Likewise.
	(libm_alias_float_r): Use libm_alias_float_other_r.
	* sysdeps/generic/libm-alias-float128.h
	(libm_alias_float128_other_r): New macro.
	(libm_alias_float128_other): Likewise.
	(libm_alias_float128_r): Use libm_alias_float128_other_r.
	* sysdeps/generic/libm-alias-ldouble.h
	(libm_alias_ldouble_other_r): New macro.
	(libm_alias_ldouble_other): Likewise.
	(libm_alias_ldouble_r): Use libm_alias_ldouble_other_r.
	* sysdeps/ieee754/ldbl-opt/libm-alias-double.h
	(libm_alias_double_other_r): New macro.
	(libm_alias_double_other): Likewise.
	(libm_alias_double_r): Use libm_alias_double_other_r.
	* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h
	(libm_alias_ldouble_other_r): New macro.
	(libm_alias_ldouble_other): Likewise.
	(libm_alias_ldouble_r): Use libm_alias_ldouble_other_r.
	* math/w_lgamma_main.c: Include <libm-alias-double.h>.
	[!USE_AS_COMPAT]: Use libm_alias_double_other.
	* math/w_lgammaf_main.c: Include <libm-alias-float.h>.
	[!USE_AS_COMPAT]: Use libm_alias_float_other.
	* math/w_lgammal_main.c: Include <libm-alias-ldouble.h>.
	[!USE_AS_COMPAT]: Use libm_alias_ldouble_other.
	* math/w_exp2f.c: Use libm_alias_float_other.
	* math/w_expf.c: Likewise.
	* math/w_log2f.c: Likewise.
	* math/w_logf.c: Likewise.
	* math/w_powf.c: Likewise.
	* sysdeps/ieee754/flt-32/e_exp2f.c: Include <libm-alias-float.h>.
	[!__exp2f]: Use libm_alias_float_other.
	* sysdeps/ieee754/flt-32/e_expf.c: Include <libm-alias-float.h>.
	[!__expf]: Use libm_alias_float_other.
	* sysdeps/ieee754/flt-32/e_log2f.c: Include <libm-alias-float.h>.
	[!__log2f]: Use libm_alias_float_other.
	* sysdeps/ieee754/flt-32/e_logf.c: Include <libm-alias-float.h>.
	[!__logf]: Use libm_alias_float_other.
	* sysdeps/ieee754/flt-32/e_powf.c: Include <libm-alias-float.h>.
	[!__powf]: Use libm_alias_float_other.
 2017-10-10 21:29:11 +00:00
Joseph Myers
a8dce6197a Use generic macros for lgamma_r function aliases. 
Continuing the use of generic macros for defining libm function
aliases, in preparation for adding more _FloatN / _FloatNx function
names, this patch makes the lgamma_r functions use such macros.

declare_mgen_alias_r becomes a standard macro in math-type-macros.h
instead of being locally defined in w_lgamma_r_templace.c.  This in
turn must be defined by each math-type-macros-<type>.h.  Rather than
providing an unused default in math-type-macros.h, that header is made
to give an error if math-type-macros-<type>.h failed to define
declare_mgen_alias or declare_mgen_alias_r.  The compat lgamma_r
wrappers are updated similarly.  The ldbl-opt versions are removed as
no longer needed.

Tested for x86_64, and with build-many-glibcs.py.  Installed stripped
shared libraries are unchanged except for powerpc64le (where the usual
issue applies that an ldbl-opt long double function previously used
long_double_symbol unconditionally and now the symbol versions on
powerpc64le mean weak_alias is used instead, resulting in the same
symbol versions in the final shared library but still enough
difference in the input objects for that library not to be
byte-identical).

	* sysdeps/generic/math-type-macros.h [!declare_mgen_alias]: Give
	error.  Remove default definition of declare_mgen_alias.
	[!declare_mgen_alias_r]: Likewise.
	* sysdeps/generic/math-type-macros-double.h
	[!declare_mgen_alias_r] (declare_mgen_alias_r): New macro.
	* sysdeps/generic/math-type-macros-float.h [!declare_mgen_alias_r]
	(declare_mgen_alias_r): Likewise.
	* sysdeps/generic/math-type-macros-float128.h
	[!declare_mgen_alias_r] (declare_mgen_alias_r): Likewise.
	* sysdeps/generic/math-type-macros-ldouble.h
	[!declare_mgen_alias_r] (declare_mgen_alias_r): Likewise.
	* math/w_lgamma_r_template.c (declare_mgen_alias_r_x): Remove
	macro.
	(declare_mgen_alias_r_s): Likewise.
	(declare_mgen_alias_r): Likewise.
	* math/w_lgamma_r_compat.c: Include <libm-alias-double.h>.
	(lgamma_r): Define using libm_alias_double_r.
	* math/w_lgammaf_r_compat.c: Include <libm-alias-float.h>.
	(lgammaf_r): Define using libm_alias_float_r.
	* math/w_lgammal_r_compat.c: Include <libm-alias-ldouble.h>.
	(lgammal_r): Define using libm_alias_ldouble_r.
	* sysdeps/ieee754/ldbl-opt/w_lgamma_r_compat.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
 2017-10-09 22:04:18 +00:00
Joseph Myers
c7509db215 Remove ldbl-opt w_scalbln.c. 
The ldbl-opt version of w_scalbln.c is not in fact needed; it handles
compat symbol versions for libc, but this file isn't built for libc,
only for libm.  This patch removes this file.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.

	* sysdeps/ieee754/ldbl-opt/w_scalbln.c: Remove file.
 2017-10-09 16:52:56 +00:00
Joseph Myers
f85a176f3f Use libm_alias_double in ldbl-128, ldbl-96 fma. 
This patch makes the ldbl-128 and ldbl-96 implementations of fma use
libm_alias_double.

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/ldbl-128/s_fma.c: Include <libm-alias-double.h>.
	[!__fma] (fma): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-96/s_fma.c: Include <libm-alias-double.h>.
	[!__fma] (fma): Define using libm_alias_double.
 2017-10-06 20:23:58 +00:00
Joseph Myers
fd3b4e7c8a Use libm_alias_ldouble for ldbl-128 functions. 
This patch makes ldbl-128 functions use libm_alias_ldouble to define
function aliases.  float128_private.h is updated accordingly.  Most of
the ldbl-64-128 wrappers are removed as no longer needed with this
change (leaving those that involve versioning for functions in libc or
that shouldn't be exported from libm for _Float128 / _Float64x types
with the same format as long double).

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.

	* sysdeps/ieee754/float128/float128_private.h: Include
	<libm-alias-ldouble.h> and <libm-alias-float128.h>.
	(libm_alias_ldouble_r): Undefine and redefine.
	* sysdeps/ieee754/ldbl-128/s_asinhl.c: Include
	<libm-alias-ldouble.h>.
	(asinhl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_atanl.c: Include
	<libm-alias-ldouble.h>.
	(atanl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_cbrtl.c: Include
	<libm-alias-ldouble.h>.
	(cbrtl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_ceill.c: Include
	<libm-alias-ldouble.h>.
	(ceill): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_copysignl.c: Include
	<libm-alias-ldouble.h>.
	(copysignl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_cosl.c: Include
	<libm-alias-ldouble.h>.
	(cosl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_erfl.c: Include
	<libm-alias-ldouble.h>.
	(erfl): Define using libm_alias_ldouble.
	(erfcl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_expm1l.c: Include
	<libm-alias-ldouble.h>.
	(expm1l): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_fabsl.c: Include
	<libm-alias-ldouble.h>.
	(fabsl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_floorl.c: Include
	<libm-alias-ldouble.h>.
	(floorl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_fmal.c: Include
	<libm-alias-ldouble.h>.
	(fmal): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_frexpl.c: Include
	<libm-alias-ldouble.h>.
	(frexpl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c (fromfpl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Include
	<libm-alias-ldouble.h>.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c (fromfpxl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Include
	<libm-alias-ldouble.h>.
	(getpayloadl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c: Include
	<libm-alias-ldouble.h>.
	(llrintl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include
	<libm-alias-ldouble.h>.
	(llroundl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_logbl.c: Include
	<libm-alias-ldouble.h>.
	(logbl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c: Include
	<libm-alias-ldouble.h>.
	(lrintl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include
	<libm-alias-ldouble.h>.
	(lroundl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_modfl.c: Include
	<libm-alias-ldouble.h>.
	(modfl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_nearbyintl.c: Include
	<libm-alias-ldouble.h>.
	(nearbyintl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include
	<libm-alias-ldouble.h>.
	(nextafterl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_nextupl.c: Include
	<libm-alias-ldouble.h>.
	(nextupl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_remquol.c: Include
	<libm-alias-ldouble.h>.
	(remquol): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_rintl.c: Include
	<libm-alias-ldouble.h>.
	(rintl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Include
	<libm-alias-ldouble.h>.
	(roundevenl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_roundl.c: Include
	<libm-alias-ldouble.h>.
	(roundl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c (setpayloadl): Define
	using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Include
	<libm-alias-ldouble.h>.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c (setpayloadsigl):
	Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_sincosl.c: Include
	<libm-alias-ldouble.h>.
	(sincosl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_sinl.c: Include
	<libm-alias-ldouble.h>.
	(sinl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include
	<libm-alias-ldouble.h>.
	(tanhl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_tanl.c: Include
	<libm-alias-ldouble.h>.
	(tanl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
	<libm-alias-ldouble.h>.
	(totalorderl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
	<libm-alias-ldouble.h>.
	(totalordermagl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_truncl.c: Include
	<libm-alias-ldouble.h>.
	(truncl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c (ufromfpl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c (ufromfpxl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: Include
	<libm-alias-ldouble.h>.
	(weak_alias): Do not undefine and redefine.
	[IS_IN (libc)] (libm_alias_ldouble): Undefine and redefine.
	(copysignl): Define with long_double_symbol only if [IS_IN
	(libc)].
	* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: Include
	<libm-alias-ldouble.h>.
	(weak_alias): Do not undefine and redefine.
	[IS_IN (libc)] (libm_alias_ldouble): Undefine and redefine.
	(frexpl): Define with long_double_symbol only if [IS_IN (libc)].
	* sysdeps/ieee754/ldbl-64-128/s_modfl.c: Include
	<libm-alias-ldouble.h>.
	(weak_alias): Do not undefine and redefine.
	[IS_IN (libc)] (libm_alias_ldouble): Undefine and redefine.
	(modfl): Define with long_double_symbol only if [IS_IN (libc)].
	* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: Remove file.
	* sysdeps/ieee754/ldbl-64-128/s_atanl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_ceill.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_cosl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_erfl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_floorl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_fmal.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_logbl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_remquol.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_rintl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_roundl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_sinl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_tanl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_truncl.c: Likewise.
 2017-10-06 17:45:05 +00:00
Joseph Myers
6dff198369 Remove redundant ldbl-64-128 files. 
Various source files in ldbl-64-128 are redundant, because they wrap
files that no longer provide public symbols that need special
versioning (those symbols having moved to separate errno-setting
wrappers), or, in the case of w_scalblnl.c, because the type-generic
template now does everything required (it deals with symbol versioning
for use in libm, and this file is never built for libc anyway - the
compat scalbln* symbols in libc, as opposed to scalbn*, are only for
i386 and m68k and are aliases to the corresponding scalbn* symbols).
This patch removes those redundant files.

Tested with build-many-glibcs.py (for all ldbl-64-128 configurations)
that installed stripped shared libraries are unchanged by this patch.

	* sysdeps/ieee754/ldbl-64-128/e_ilogbl.c: Remove file.
	* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/w_scalblnl.c: Likewise.
 2017-10-06 15:02:12 +00:00
Joseph Myers
86f9568af6 Use libm_alias_ldouble for ldbl-96 functions. 
This patch makes ldbl-96 functions use libm_alias_ldouble to define
function aliases.

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/ldbl-96/s_asinhl.c: Include
	<libm-alias-ldouble.h>.
	(asinhl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_cbrtl.c: Include
	<libm-alias-ldouble.h>.
	(cbrtl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_copysignl.c: Include
	<libm-alias-ldouble.h>.
	(copysignl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_cosl.c: Include
	<libm-alias-ldouble.h>.
	(cosl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_erfl.c: Include
	<libm-alias-ldouble.h>.
	(erfl): Define using libm_alias_ldouble.
	(erfcl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmal.c: Include
	<libm-alias-ldouble.h>.
	(fmal): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_frexpl.c: Include
	<libm-alias-ldouble.h>.
	(frexpl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c (fromfpl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Include
	<libm-alias-ldouble.h>.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c (fromfpxl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Include
	<libm-alias-ldouble.h>.
	(getpayloadl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_llrintl.c: Include
	<libm-alias-ldouble.h>.
	(llrintl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include
	<libm-alias-ldouble.h>.
	(llroundl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_lrintl.c: Include
	<libm-alias-ldouble.h>.
	(lrintl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include
	<libm-alias-ldouble.h>.
	(lroundl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_modfl.c: Include
	<libm-alias-ldouble.h>.
	(modfl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_nextupl.c: Include
	<libm-alias-ldouble.h>.
	(nextupl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_remquol.c: Include
	<libm-alias-ldouble.h>.
	(remquol): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Include
	<libm-alias-ldouble.h>.
	(roundevenl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_roundl.c: Include
	<libm-alias-ldouble.h>.
	(roundl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c (setpayloadl): Define
	using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Include
	<libm-alias-ldouble.h>.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Include
	<libm-alias-ldouble.h>.
	(setpayloadsigl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_sincosl.c: Include
	<libm-alias-ldouble.h>.
	(sincosl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_sinl.c: Include
	<libm-alias-ldouble.h>.
	(sinl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include
	<libm-alias-ldouble.h>.
	(tanhl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_tanl.c: Include
	<libm-alias-ldouble.h>.
	(tanl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
	<libm-alias-ldouble.h>.
	(totalorderl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
	<libm-alias-ldouble.h>.
	(totalordermagl): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c (ufromfpl): Define using
	libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c (ufromfpxl): Define using
	libm_alias_ldouble.
 2017-10-05 21:13:40 +00:00
Joseph Myers
7e16a5d1d1 Use libm_alias_double for dbl-64 fma. 
This patch makes dbl-64 fma use libm_alias_double.  The ldbl-opt
version is removed.  The sparc32 version no longer needs to handle
compat symbols, while alpha needs a new wrapper to avoid getting the
ldbl-128 version (where ldbl-opt is earlier in the list of sysdeps
directories, so previously fma came from there).

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/dbl-64/s_fma.c: Include <libm-alias-double.h>.
	(fma): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_fma.c: Remove file.
	* sysdeps/sparc/sparc32/fpu/s_fma.c: Do not include
	<math_ldbl_opt.h>.
	(fmal): Do not define as compat symbol here.
	* sysdeps/alpha/fpu/s_fma.c: New file.
 2017-10-04 20:32:48 +00:00
Szabolcs Nagy
86c27ade1e [BZ #22244] Fix yn(n,0) without SVID wrapper 
Without SVID compat wrapper yn(n,0) and ynf(n,0) does not raise
the divide-by-zero excpetion and it may return inf with the wrong
sign for n < 0.

	[BZ #22244]
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_yn): Fix x == 0 case.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise.
 2017-10-04 10:15:12 +01:00
Szabolcs Nagy
8f8f8ef7ab [BZ #22243] fix log2(0) and log(10) in downward rounding 
On 64bit targets if the SVID compat wrapper is suppressed (e.g. static linking)
then log2(0) and log10(0) returned inf instead of -inf.

	[BZ #22243]
	* sysdeps/ieee754/dbl-64/wordsize-64/e_log10.c (__ieee754_log10): Use fabs.
	* sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c (__ieee754_log2): Likewise.
 2017-10-04 10:13:56 +01:00
Joseph Myers
d8f619b393 Use libm_alias_double for dbl-64 modf. 
This patch makes dbl-64 modf use libm_alias_double.  Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is changed to define the libc compat symbol only.  Because of
multiarch wrappers, the changed implementations are made not to define
aliases at all if __modf is defined as a macro, as with other
functions, so avoiding duplicate compat symbols while allowing those
wrappers to be simplified.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/dbl-64/s_modf.c: Include <libm-alias-double.h>.
	(modf): Define using libm_alias_double, only if [!__modf].
	* sysdeps/ieee754/dbl-64/wordsize-64/s_modf.c: Include
	<libm-alias-double.h>.
	(modf): Define using libm_alias_double, only if [!__modf].
	* sysdeps/ieee754/ldbl-opt/s_modf.c (modfl): Only define libc
	compat symbol here.
	* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-ppc32.c
	(weak_alias): Do not undefine and redefine.
	(strong_alias): Likewise.
	* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-ppc64.c
	(weak_alias): Likewise.
	(strong_alias): Likewise.
 2017-10-03 23:46:23 +00:00
Joseph Myers
4699cb8b5f Use libm_alias_double for dbl-64 logb. 
This patch makes dbl-64 logb use libm_alias_double.  Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is removed.  Because of multiarch wrappers, the changed
implementations are made not to define aliases at all if __logb is
defined as a macro, as with other functions, so avoiding duplicate
compat symbols while allowing those wrappers to be simplified.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged (except on alpha
where changes from using the wordsize-64 version are expected).

	* sysdeps/ieee754/dbl-64/s_logb.c: Include <libm-alias-double.h>.
	(logb): Define using libm_alias_double, only if [!__logb].
	* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Include
	<libm-alias-double.h>.
	(logb): Define using libm_alias_double, only if [!__logb].
	* sysdeps/ieee754/ldbl-opt/s_logb.c: Remove file.
	* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-ppc32.c
	(weak_alias): Do not undefine and redefine.
	(strong_alias): Likewise.
	* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c
	(weak_alias): Likewise.
	(strong_alias): Likewise.
 2017-10-03 23:44:41 +00:00
Joseph Myers
7f1cbdf8ed Use libm_alias_float for dbl-64 fmaf. 
This patch makes the implementation of fmaf in the dbl-64 directory
use libm_alias float.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.

	* sysdeps/ieee754/dbl-64/s_fmaf.c: Include <libm-alias-float.h>.
	[!__fmaf] (fmaf): Define using libm_alias_float.
 2017-10-03 21:01:33 +00:00
Joseph Myers
39793865ec Use libm_alias_double for dbl-64 frexp. 
This patch makes dbl-64 frexp use libm_alias_double.  Both the dbl-64
and dbl-64/wordsize-64 versions are changed; the ldbl-opt version is
made to define only the libc frexpl compat symbol, now the generic
code handles the libm compat symbol automatically.

Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.

	* sysdeps/ieee754/dbl-64/s_frexp.c: Include <libm-alias-double.h>.
	(frexp): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c: Include
	<libm-alias-double.h>.
	(frexp): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_frexp.c (frexpl): Only define libc
	compat symbol here.
 2017-10-03 20:56:46 +00:00
Gabriel F. T. Gomes
aa0235dfde Add C++ versions of iscanonical for ldbl-96 and ldbl-128ibm (bug 22235) 
All representations of floating-point numbers in types with IEC 60559
binary exchange format are canonical.  On the other hand, types with IEC
60559 extended formats, such as those implemented under ldbl-96 and
ldbl-128ibm, contain representations that are not canonical.

TS 18661-1 introduced the type-generic macro iscanonical, which returns
whether a floating-point value is canonical or not.  In Glibc, this
type-generic macro is implemented using the macro __MATH_TG, which, when
support for float128 is enabled, relies on __builtin_types_compatible_p
to select between floating-point types.  However, this use of
iscanonical breaks C++ applications, because the builtin is only
available in C mode.

This patch provides a C++ implementation of iscanonical that relies on
function overloading, rather than builtins, to select between
floating-point types.

Unlike the C++ implementations for iszero and issignaling, this
implementation ignores __NO_LONG_DOUBLE_MATH.  The double type always
matches IEC 60559 double format, which is always canonical.  Thus, when
double and long double are the same (__NO_LONG_DOUBLE_MATH), iscanonical
always returns 1 and is not implemented with __MATH_TG.

Tested for powerpc64, powerpc64le and x86_64.

	[BZ #22235]
	* math/math.h: Trivial fix for unbalanced parentheses in comment.
	* math/Makefile [CXX] (tests): Add test-math-iscanonical.cc.
	(CFLAGS-test-math-iscanonical.cc): New variable.
	* math/test-math-iscanonical.cc: New file.
	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (iscanonical):
	Provide a C++ implementation based on function overloading,
	rather than using __MATH_TG, which uses C-only builtins.
	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h (iscanonical):
	Likewise.
	* sysdeps/powerpc/powerpc64le/Makefile
	(CFLAGS-test-math-iscanonical.cc): New variable.
 2017-10-03 16:01:37 -03:00
Joseph Myers
a1132b5e56 Use libm_alias_double for more dbl-64 functions. 
This patch makes more dbl-64 functions use libm_alias_double to define
function aliases.  Specifically, it makes the change for functions
with dbl-64/wordsize-64 versions, changing both the dbl-64 and
dbl-64/wordsize-64 versions and removing the ldbl-opt wrappers.
Functions are excluded from this patch if there are complications
because of versions of those functions also present in libc, or
architecture-specific wrappers round these files.

Tested for x86_64, and with build-many-glibcs.py.  Installed stripped
shared libraries are unchanged except for alpha (where increased use
of dbl-64/wordsize-64 files, where previously ldbl-opt files that
wrapped dbl-64 files were used, was expected to result in different,
better code).

	* sysdeps/ieee754/dbl-64/s_ceil.c: Include <libm-alias-double.h>.
	(ceil): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_floor.c: Include <libm-alias-double.h>.
	(floor): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_llround.c: Include
	<libm-alias-double.h>.
	(llround): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_lround.c: Include
	<libm-alias-double.h>.
	(lround): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_nearbyint.c: Include
	<libm-alias-double.h>.
	(nearbyint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_remquo.c: Include
	<libm-alias-double.h>.
	(remquo): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_rint.c: Include <libm-alias-double.h>.
	(rint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_round.c: Include <libm-alias-double.h>.
	(round): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_trunc.c: Include <libm-alias-double.h>.
	(trunc): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Include
	<libm-alias-double.h>.
	(ceil): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Include
	<libm-alias-double.h>.
	(floor): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c: Include
	<libm-alias-double.h>.
	(llround): Define using libm_alias_double.
	[_LP64] (lround): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include
	<libm-alias-double.h>.
	[!_LP64] (lround): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c: Include
	<libm-alias-double.h>.
	(nearbyint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c: Include
	<libm-alias-double.h>.
	(remquo): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_rint.c: Include
	<libm-alias-double.h>.
	(rint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Include
	<libm-alias-double.h>.
	(round): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Include
	<libm-alias-double.h>.
	(trunc): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_ceil.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_floor.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_llround.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_lround.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_remquo.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_rint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_round.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_trunc.c: Likewise.
 2017-10-03 17:47:35 +00:00
Joseph Myers
38722448c6 Use libm_alias_double for dbl-64 atan, tan. 
This patch makes the dbl-64 atan and tan implementations use
libm_alias_double, removing the corresponding ldbl-opt wrappers.

Tested for x86_64, and with build-many-glibcs.py.  Installed stripped
shared libraries are unchanged on non-ldbl-opt platforms.  For
ldbl-opt configurations, the patch has the effect of causing
compat_symbol to define atanl and tanl in terms of __atan and __tan
instead of in terms of atan and tan, which is enough to change the
installed stripped libm.so.

	* sysdeps/ieee754/dbl-64/s_atan.c: Include <libm-alias-double.h>.
	(atan): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_tan.c: Include <libm-alias-double.h>.
	(tan): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_atan.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_tan.c: Likewise.
 2017-10-02 23:16:56 +00:00
Joseph Myers
527cd19c3d Make dbl-64 atan and tan into weak aliases. 
This patch converts the dbl-64 implementations of atan and tan into
weak aliases of __atan and __tan, in preparation for making them use
libm_alias_double.  Consequent changes are made to the x86_64
multiarch versions wrapping round them (with the dbl-64 functions,
like other such functions, being made not to define their aliases at
all if __atan or __tan are defined as macros by an including file).

Tested for x86_64, and with build-many-glibcs.py.

	* sysdeps/ieee754/dbl-64/s_atan.c (atan): Rename to __atan and
	define as weak alias of __atan.  Do not define any aliases if
	[__atan].
	[NO_LONG_DOUBLE] (__atanl): Define as strong alias of __atan.
	[NO_LONG_DOUBLE] (atanl): Define as weak alias of __atanl.
	* sysdeps/ieee754/dbl-64/s_tan.c (tan): Rename to __tan and define
	as weak alias of __tan.  Do not define any aliases if [__tan].
	[NO_LONG_DOUBLE] (__tanl): Define as strong alias of __tan.
	[NO_LONG_DOUBLE] (tanl): Define as weak alias of __tanl.
	* sysdeps/x86_64/fpu/multiarch/s_atan-avx.c (atan): Rename to
	__atan.
	* sysdeps/x86_64/fpu/multiarch/s_atan-fma.c (atan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_atan-fma4.c (atan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_atan.c (atan): Rename to __atan
	and define as weak alias of __atan.
	* sysdeps/x86_64/fpu/multiarch/s_tan-avx.c (tan): Rename to
	__atan.
	* sysdeps/x86_64/fpu/multiarch/s_tan-fma.c (tan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_tan-fma4.c (tan): Likewise.
	* sysdeps/x86_64/fpu/multiarch/s_tan.c (tan): Rename to __tan and
	define as weak alias of __tan.
 2017-10-02 20:20:52 +00:00
Szabolcs Nagy
bd4430c2a6 Do not wrap logf, log2f and powf 
The new generic logf, log2f and powf code don't need wrappers any more,
they set errno inline so only use the wrappers on targets that need it.

	* sysdeps/ieee754/flt-32/e_log2f.c (__log2f): Define without wrapper.
	* sysdeps/ieee754/flt-32/e_logf.c (__logf): Likewise
	* sysdeps/ieee754/flt-32/e_powf.c (__powf): Likewise
	* sysdeps/ieee754/flt-32/w_log2f.c: New file.
	* sysdeps/ieee754/flt-32/w_logf.c: New file.
	* sysdeps/ieee754/flt-32/w_powf.c: New file.
	* sysdeps/i386/fpu/w_log2f.c: New file.
	* sysdeps/i386/fpu/w_logf.c: New file.
	* sysdeps/i386/fpu/w_powf.c: New file.
	* sysdeps/m68k/m680x0/fpu/w_log2f.c: New file.
	* sysdeps/m68k/m680x0/fpu/w_logf.c: New file.
	* sysdeps/m68k/m680x0/fpu/w_powf.c: New file.
 2017-10-02 14:39:38 +01:00
Szabolcs Nagy
f7a0b063e7 Do not wrap expf and exp2f 
The new generic expf and exp2f code don't need wrappers any more, they
set errno inline, so only use the wrappers on targets that need it.
(If the wrapper is needed, then the top level wrapper code is included,
otherwise empty w_exp*f.c is used to suppress the wrapper.)

A powerpc64 expf implementation includes the expf c code directly which
needed some changes.

	* sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper.
	* sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise
	* sysdeps/ieee754/flt-32/w_exp2f.c: New file.
	* sysdeps/ieee754/flt-32/w_expf.c: New file.
	* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for
	the new expf code.
	* sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file.
	* sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file.
	* sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file.
	* sysdeps/m68k/m680x0/fpu/w_expf.c: New file.
	* sysdeps/i386/fpu/w_exp2f.c: New file.
	* sysdeps/i386/fpu/w_expf.c: New file.
	* sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file.
	* sysdeps/x86_64/fpu/w_expf.c: New file.
 2017-10-02 14:38:54 +01:00
H.J. Lu
c26dd7c600 Mark ____wcsto*_l_internal functions with attribute_hidden [BZ #18822] 
Mark ____wcsto*_l_internal functions with attribute_hidden to allow
direct access to them within libc.so and libc.a without using GOT nor
PLT.

	[BZ #18822]
	* include/wchar.h (____wcstof_l_internal): New prototype.
	(____wcstod_l_internal): Likewise.
	(____wcstold_l_internal): Likewise.
	(____wcstol_l_internal): Likewise.
	(____wcstoul_l_internal): Likewise.
	(____wcstoll_l_internal): Likewise.
	(____wcstoull_l_internal): Likewise.
	(____wcstof128_l_internal): Likewise.
	* sysdeps/ieee754/float128/wcstof128.c
	(____wcstof128_l_internal): Removed.
	* sysdeps/ieee754/float128/wcstof128_l.c
	(____wcstof128_l_internal): Likewise.
	* wcsmbs/wcstod.c (____wcstod_l_internal): Likewise.
	* wcsmbs/wcstod_l.c (____wcstod_l_internal): Likewise.
	* wcsmbs/wcstof.c (____wcstof_l_internal): Likewise.
	* wcsmbs/wcstof_l.c (____wcstof_l_internal): Likewise.
	* wcsmbs/wcstol_l.c (____wcstol_l_internal): Likewise.
	* wcsmbs/wcstold.c (____wcstold_l_internal): Likewise.
	* wcsmbs/wcstold_l.c (____wcstold_l_internal): Likewise.
	* wcsmbs/wcstoll_l.c (____wcstoll_l_internal): Likewise.
	* wcsmbs/wcstoul_l.c (____wcstoul_l_internal): Likewise.
	* wcsmbs/wcstoull_l.c (____wcstoull_l_internal): Likewise.
 2017-10-01 15:09:28 -07:00
Joseph Myers
1e2bffd05c Use libm_alias_double for some dbl-64 functions. 
Continuing the move of libm aliases to common macros that can create
_FloatN / _FloatNx aliases in future, this patch converts some dbl-64
functions to using libm_alias_double, thereby eliminating the need for
some ldbl-opt wrappers.

This patch deliberately limits what functions are converted so that it
can be verified by comparison of stipped binaries.  Specifically, atan
and tan are excluded because they first need converting to being weak
aliases; fma is omitted as it has additional complications with
versions in other directories (removing the ldbl-opt version can
e.g. cause the ldbl-128 version to be used instead of dbl-64); and
functions that have both dbl-64/wordsize-64 and ldbl-opt versions are
excluded because ldbl-opt currently always wraps dbl-64 function
versions, so changing those will result in platforms using both
ldbl-opt and dbl-64/wordsize-64 (i.e. alpha) starting to use the
dbl-64/wordsize-64 versions of those functions (which is good, as an
optimization, but still best separated from the present patch to get
better validation).

Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/dbl-64/s_asinh.c: Include <libm-alias-double.h>.
	(asinh): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_cbrt.c: Include <libm-alias-double.h>.
	(cbrt): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_copysign.c: Include
	<libm-alias-double.h>.
	(copysign): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_erf.c: Include <libm-alias-double.h>.
	(erf): Define using libm_alias_double.
	(erfc): Likewise.
	* sysdeps/ieee754/dbl-64/s_expm1.c: Include <libm-alias-double.h>.
	(expm1): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_fabs.c: Include <libm-alias-double.h>.
	(fabs): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_fromfp.c (fromfp): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Include
	<libm-alias-double.h>.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c (fromfpx): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_getpayload.c: Include
	<libm-alias-double.h>.
	(getpayload): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_llrint.c: Include
	<libm-alias-double.h>.
	(llrint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_lrint.c: Include <libm-alias-double.h>.
	(lrint): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_nextup.c: Include
	<libm-alias-double.h>.
	(nextup): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_roundeven.c: Include
	<libm-alias-double.h>.
	(roundeven): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_setpayload.c (setpayload): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Include
	<libm-alias-double.h>.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c (setpayloadsig): Define
	using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_sin.c: Include <libm-alias-double.h>.
	(cos): Define using libm_alias_double.
	(sin): Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c: Include
	<libm-alias-double.h>.
	(sincos): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_tanh.c: Include <libm-alias-double.h>.
	(tanh): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: Include
	<libm-alias-double.h>.
	(totalorder): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
	<libm-alias-double.h>.
	(totalordermag): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c (ufromfp): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c (ufromfpx): Define using
	libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Include
	<libm-alias-double.h>.
	(getpayload): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Include
	<libm-alias-double.h>.
	(roundeven): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Include
	<libm-alias-double.h>.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
	<libm-alias-double.h>.
	(totalorder): Define using libm_alias_double.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
	<libm-alias-double.h>.
	(totalordermag): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_copysign.c (copysignl): Only define
	libc compat symbol here.
	* sysdeps/ieee754/ldbl-opt/s_asinh.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_cbrt.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_erf.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_expm1.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fabs.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_llrint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_lrint.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_sin.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_sincos.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_tanh.c: Likewise.
 2017-09-29 23:54:33 +00:00
Wilco Dijkstra
bd8d53bb33 Use fabs(f/l) rather than __fabs 
A few math functions still use __fabs(f/l) rather than fabs, which
means they won't be inlined. Rename them so they are inlined.
Also add -fno-builtin-fabsl to nofpu powerpc makefile to work around
BZ #29253.

	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	(__ieee754_lgamma_r): Use fabs rather than __fabs.
	* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise.
	* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	(__ieee754_lgammaf_r): Use fabsf rather than __fabsf.
	* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise.
	* sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise.
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c
	(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
	* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c
	(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
	* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise.
	* sysdeps/powerpc/nofpu/Makefile: Add -fno-builtin-fabsl for BZ #29253.
 2017-09-29 18:54:24 +01:00
Szabolcs Nagy
4ea49f4c08 New generic powf 
without wrapper on aarch64:
powf reciprocal-throughput: 4.2x faster
powf latency: 2.6x faster
old worst-case error: 1.11 ulp
new worst-case error: 0.82 ulp
aarch64 .text size: -780 bytes
aarch64 .rodata size: +144 bytes

powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms
that are used in exp2f and log2f, except that the log2f polynomial is
larger for extra precision and its output (and exp2f input) may be
scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction
step of exp2 (possible when efficient round and convert toint operation
is available).

The special case handling tries to minimize the checks in the hot path.
When the input of exp2_inline is checked, int arithmetics is used as
that was faster on the tested aarch64 cores.

	* math/Makefile (type-float-routines): Add e_powf_log2_data.
	* sysdeps/ieee754/flt-32/e_powf.c: New implementation.
	* sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file.
	* sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define.
	(issignalingf_inline): Likewise.
	(POWF_LOG2_TABLE_BITS): Likewise.
	(POWF_LOG2_POLY_ORDER): Likewise.
	(POWF_SCALE_BITS): Likewise.
	(POWF_SCALE): Likewise.
	* sysdeps/i386/fpu/e_powf_log2_data.c: New file.
	* sysdeps/ia64/fpu/e_powf_log2_data.c: New file.
	* sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file.
 2017-09-29 17:30:53 +01:00
Szabolcs Nagy
875c76c704 New generic log2f 
Similar to the new logf: double precision arithmetics and a small
lookup table is used. The argument reduction step is the same as in
the new logf.

without wrapper on aarch64:
log2f reciprocal-throughput: 2.3x faster
log2f latency: 2.1x faster
old worst case error: 1.72 ulp
new worst case error: 0.75 ulp
aarch64 .text size: -252 bytes
aarch64 .rodata size: +244 bytes

	* math/Makefile (type-float-routines): Add e_log2f_data.
	* sysdeps/ieee754/flt-32/e_log2f.c: New implementation.
	* sysdeps/ieee754/flt-32/e_log2f_data.c: New file.
	* sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define.
	(LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define.
	* sysdeps/i386/fpu/e_log2f_data.c: New file.
	* sysdeps/ia64/fpu/e_log2f_data.c: New file.
	* sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file.
 2017-09-29 17:17:41 +01:00
Szabolcs Nagy
bf27d3973d New generic logf 
without wrapper on aarch64:
logf reciprocal-throughput: 2.2x faster
logf latency: 1.9x faster
old worst case error: 0.89 ulp
new worst case error: 0.82 ulp
aarch64 .text size: -356 bytes
aarch64 .rodata size: +240 bytes

Uses double precision arithmetics and a lookup table to allow smaller
polynomial and avoid the use of division.

Data is in a separate translation unit with fixed layout to prevent the
compiler generating suboptimal literal access.

Errors are handled inline according to POSIX rules, but this patch
keeps the wrapper with SVID compatible error handling.

Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode.

	* math/Makefile (type-float-routines): Add e_logf_data.
	* sysdeps/ieee754/flt-32/e_logf.c: New implementation.
	* sysdeps/ieee754/flt-32/e_logf_data.c: New file.
	* sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define.
	(LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define.
	* sysdeps/i386/fpu/e_logf_data.c: New file.
	* sysdeps/ia64/fpu/e_logf_data.c: New file.
	* sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file.
 2017-09-29 11:46:46 +01:00
Joseph Myers
f124cb3811 Fix nearbyint arithmetic moved before feholdexcept (bug 22225). 
In <https://sourceware.org/ml/libc-alpha/2013-05/msg00722.html> I
remarked on the possibility of arithmetic in various nearbyint
implementations being scheduled before feholdexcept calls, resulting
in spurious "inexact" exceptions.

I'm now actually observing this occurring in glibc built for ARM with
GCC 7 (in fact, both copies of the same addition/subtraction sequence
being combined and moved out before the conditionals and
feholdexcept/fesetenv pairs), resulting in test failures.

This patch makes the nearbyint implementations with this particular
feholdexcept / arithmetic / fesetenv pattern consistently use
math_opt_barrier on the function argument when first used in
arithmetic, and also consistently use math_force_eval before fesetenv
(the latter was generally already done, but the dbl-64/wordsize-64
implementation used math_opt_barrier instead, and as
math_opt_barrier's intended effect is through its output value being
used, such a use that doesn't use the return value is suspect).

Tested for x86_64 (--disable-multi-arch so more of these
implementations get used), and for ARM in a configuration where I saw
the problem scheduling.

	[BZ #22225]
	* sysdeps/ieee754/dbl-64/s_nearbyint.c (__nearbyint): Use
	math_opt_barrier on argument when doing arithmetic on it.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c (__nearbyint):
	Likewise.  Use math_force_eval not math_opt_barrier after
	arithmetic.
	* sysdeps/ieee754/flt-32/s_nearbyintf.c (__nearbyintf): Use
	math_opt_barrier on argument when doing arithmetic on it.
	* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl):
	Likewise.
 2017-09-28 01:59:02 +00:00
Stefan Liebler
9947638d74 Fix typo in sincos32.h inclusion guard. 
This patch fixes a typo in inclusion guard in sincos32.h.

ChangeLog:

	* sysdeps/ieee754/dbl-64/sincos32.h
	[SINCCOS32_H]: Remove define.
	[SINCOS32_H]: Define.
 2017-09-25 15:56:22 +02:00
Szabolcs Nagy
72aa623345 Optimized generic expf and exp2f with wrappers 
Based on new expf and exp2f code from
https://github.com/ARM-software/optimized-routines/

with wrapper on aarch64:
expf reciprocal-throughput: 2.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
expf reciprocal-throughput: 3.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
exp2f reciprocal-throughput: 2.8x faster
exp2f latency: 1.3x faster
libm.so size on aarch64:
.text size: -152 bytes
.rodata size: -1740 bytes
expf/exp2f worst case nearest rounding error: 0.502 ulp
worst case non-nearest rounding error: 1 ulp

Error checks are inline and errno setting is in separate tail called
functions, but the wrappers are kept in this patch to handle the
_LIB_VERSION==_SVID_ case.  (So e.g. errno is set twice for expf calls
and once for __expf_finite calls on targets where the new code is used.)

Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.

Const data is kept in a separate translation unit which complicates
maintenance a bit, but is expected to give good code for literal loads
on most targets and allows sharing data across expf, exp2f and powf.
(This data is disabled on i386, m68k and ia64 which have their own
expf, exp2f and powf code.)

Some details may need target specific tweaks:
- best convert and round to int operation in the arg reduction may be
different across targets.
- code was optimized on fma target, optimal polynomial eval may be
different without fma.
- gcc does not always generate good code for fp bit representation
access via unions or it may be inherently slow on some targets.

The libm-test-ulps will need adjustment because..
- The argument reduction ideally uses nearest rounded rint, but that is
not efficient on most targets, so the polynomial can get evaluated on a
wider interval in non-nearest rounding mode making 1 ulp errors common
in that case.
- The polynomial is evaluated such that it may have 1 ulp error on
negative tiny inputs with upward rounding.

	* math/Makefile (type-float-routines): Add math_errf and e_exp2f_data.
	* sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define.
	(roundtoint, converttoint): Likewise.
	* sysdeps/ieee754/flt-32/e_expf.c: New implementation.
	* sysdeps/ieee754/flt-32/e_exp2f.c: New implementation.
	* sysdeps/ieee754/flt-32/e_exp2f_data.c: New file.
	* sysdeps/ieee754/flt-32/math_config.h: New file.
	* sysdeps/ieee754/flt-32/math_errf.c: New file.
	* sysdeps/ieee754/flt-32/t_exp2f.h: Remove.
	* sysdeps/i386/fpu/e_exp2f_data.c: New file.
	* sysdeps/i386/fpu/math_errf.c: New file.
	* sysdeps/ia64/fpu/e_exp2f_data.c: New file.
	* sysdeps/ia64/fpu/math_errf.c: New file.
	* sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file.
	* sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
 2017-09-25 10:44:39 +01:00
Joseph Myers
2f49ce7d62 Use libm_alias_float in flt-32. 
This patch makes flt-32 libm functions use libm_alias_float to define
public interfaces (in cases where _Float32 aliases of those interfaces
would be appropriate, so not for finitef / isinff / isnanf).

Tested for x86_64.  Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.

	* sysdeps/ieee754/flt-32/s_asinhf.c: Include <libm-alias-float.h>.
	(asinhf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_atanf.c: Include <libm-alias-float.h>.
	(atanf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_cbrtf.c: Include <libm-alias-float.h>.
	(cbrtf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_ceilf.c: Include <libm-alias-float.h>.
	(ceilf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_copysignf.c: Include
	<libm-alias-float.h>.
	(copysignf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_cosf.c: Include <libm-alias-float.h>.
	(cosf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_erff.c: Include <libm-alias-float.h>.
	(erff): Define using libm_alias_float.
	(erfcf): Likewise.
	* sysdeps/ieee754/flt-32/s_expm1f.c: Include <libm-alias-float.h>.
	(expm1f): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_fabsf.c: Include <libm-alias-float.h>.
	(fabsf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_floorf.c: Include <libm-alias-float.h>.
	(floorf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_frexpf.c: Include <libm-alias-float.h>.
	(frexpf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_fromfpf.c (fromfpf): Define using
	libm_alias_float.
	* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Include
	<libm-alias-float.h>.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c (fromfpxf): Define using
	libm_alias_float.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c: Include
	<libm-alias-float.h>.
	(getpayloadf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_llrintf.c: Include
	<libm-alias-float.h>.
	(llrintf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_llroundf.c: Include
	<libm-alias-float.h>.
	(llroundf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_logbf.c: Include <libm-alias-float.h>.
	(logbf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_lrintf.c: Include <libm-alias-float.h>.
	(lrintf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_lroundf.c: Include <libm-alias-float.h>.
	(lroundf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_modff.c: Include <libm-alias-float.h>.
	(modff): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_nearbyintf.c: Include
	<libm-alias-float.h>.
	(nearbyintf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_nextafterf.c: Include
	<libm-alias-float.h>.
	(nextafterf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_nextupf.c: Include
	<libm-alias-float.h>.
	(nextupf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_remquof.c: Include
	<libm-alias-float.h>.
	(remquof): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_rintf.c: Include <libm-alias-float.h>.
	(rintf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_roundevenf.c: Include
	<libm-alias-float.h>.
	(roundevenf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_roundf.c: Include <libm-alias-float.h>.
	(roundf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c (setpayloadf): Define
	using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Include
	<libm-alias-float.h>.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c (setpayloadsigf):
	Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_sincosf.c: Include
	<libm-alias-float.h>.
	(sincosf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_sinf.c: Include <libm-alias-float.h>.
	(sinf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_tanf.c: Include <libm-alias-float.h>.
	(tanf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_tanhf.c: Include <libm-alias-float.h>.
	(tanhf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Include
	<libm-alias-float.h>.
	(totalorderf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
	<libm-alias-float.h>.
	(totalordermagf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_truncf.c: Include <libm-alias-float.h>.
	(truncf): Define using libm_alias_float.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c (ufromfpf): Define using
	libm_alias_float.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c (ufromfpxf): Define using
	libm_alias_float.
 2017-09-22 20:24:12 +00:00
Gabriel F. T. Gomes
9ac3c68218 Remove conditional on LDBL_MANT_DIG from e_lgammal_r.c 
The IEEE 754 implementation of lgammal in sysdeps/ieee754/ldbl-128/ used
to be shared by IBM's implementation in sysdeps/ieee754/ldbl-128ibm/ (by
an inclusion of the source file).  In order for the algorithm to work
for IBM's implementation, a check for LDBL_MANT_DIG was required. Since
the source file is no longer shared, the requirement for the check is
gone.  This patch removes the conditionals.

Tested for powerpc64le and s390x.

	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
	Remove conditionals on LDBL_MANT_DIG.
	* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c
	(__ieee754_lgammal_r): Likewise.
 2017-09-21 17:37:40 -03:00
Gabriel F. T. Gomes
d2f0ed09f8 ldbl-128ibm: Automatic replacing of _Float128 and L() 
The ldbl-128ibm implementation of j0l, j1l, lgammal_r, and cbrtl, as
well as the tables used by expl were copied from ldbl-128.  However, the
original files used _Float128 for the type and L() for the literal
suffix.  This patch uses the following sed command to rewrite _Float128
as long double and L(x) as xL (for e_expl.c, e_j0l.c, e_j1l.c,
e_lgammal_r.c, and t_expl.h):

  sed -i <filename> \
    -e "/^#define _Float128 long double/d" \
    -e "/^#define L(x) x ## L/d" \
    -e "/L(/s/)/L/" \
    -e "/L(/s/L(//" \
    -e "s/_Float128/long double/g"

For sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c, this sed command incorrectly
replaces a few occurrences of L(), so the following command is used
instead:

  sed -i sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c \
    -e "/^#define _Float128 long double/d" \
    -e "/^#define L(x) x ## L/d" \
    -e "s/L(0\.3\{40\})/0.3333333333333333333333333333333333333333L/" \
    -e "s/L(3\.7568280825958912391243e-1)/3.7568280825958912391243e-1L/" \
    -e "/L(/s/)/L/" \
    -e "/L(/s/L(//" \
    -e "s/_Float128/long double/g"

Tested for powerpc64le with patched [1] and unpatched gcc.

[1] https://gcc.gnu.org/ml/gcc-patches/2017-08/msg01028.html

	* sysdeps/ieee754/ldbl-128ibm/e_expl.c: Remove definitions of
	_Float128 and L().
	* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: Remove definitions of
	_Float128 and L(). Replace _Float128 with long double and L(x)
	with xL, throughout the file.
	* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/t_expl.h: Likewise.
 2017-09-21 17:37:39 -03:00
Gabriel F. T. Gomes
c5c2e667bf ldbl-128ibm: Copy implementations from ldbl-128 instead of including them 
Some files under sysdeps/ieee754/ldbl-128ibm/ are able to reuse the
implementation in sysdeps/ieee754/ldbl-128/ by defining _Float128 to
long double.  This relied on compiler support for _Float128 being
disabled.  On powerpc, such support was disabled by default, however, it
got enabled by default [1] in GCC 8.

This patch copies the implementations from ldbl-128 to ldbl-128ibm.  The
uses of _Float128 and L() are kept intact in this patch and are replaced
with a script in a subsequent patch.

[1] https://gcc.gnu.org/ml/gcc-patches/2017-08/msg01028.html

Tested for powerpc64 and powerpc64le.

	* sysdeps/ieee754/ldbl-128ibm/e_expl.c: Include tables from
	sysdeps/ieee754/ldbl-128ibm.
	* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: Copy contents from the
	equivalent implementation in sysdeps/ieee754/ldbl-128/ instead
	of including it.  Keep _Float128 and L() intact.  These will be
	reviewed by a separate patch.
	* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/t_expl.h: Likewise.
 2017-09-21 17:37:39 -03:00
Joseph Myers
6d9b0b5a22 Fix powerpc64le problem from last ldbl-opt patch. 
This patch fixes a problem on powerpc64le that I missed in initial
testing of my last patch to ldbl-opt.  In the specific case of
powerpc64le, the weak aliases for exp10l and remainderl do not get
defined in the generic wrappers because of how those wrappers
undefine and redefine weak_alias.  This patch restores those aliases
in the ldbl-opt code.

Tested (compilation only) for powerpc64le with build-many-glibcs.py.

	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c [LIBM_SVID_COMPAT &&
	!LONG_DOUBLE_COMPAT (libm, GLIBC_2_1)] (weak_alias): Undefine and
	redefine.
	[LIBM_SVID_COMPAT && !LONG_DOUBLE_COMPAT (libm, GLIBC_2_1)]
	(exp10l): Define as weak alias.
	* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c [LIBM_SVID_COMPAT
	&& !LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (weak_alias): Undefine
	and redefine.
	[LIBM_SVID_COMPAT && !LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)]
	(remainderl): Define as weak alias.
 2017-09-18 23:26:35 +00:00
Joseph Myers
92892fdbfa Use libm_alias_ldouble in math/. 
This patch converts libm function implementations in math/ from using
weak_alias to using libm_alias_ldouble to define public function
names, in cases where it would be appropriate to define _Float128 /
_Float64x aliases for those functions as well (in cases where either
or both of those types exist and have the same ABI as long double).
This eliminates many ldbl-opt wrappers round these function
implementations.

Tested for x86_64, and with build-many-glibcs.py.  All installed
stripped shared libraries are unchanged except for libm.so on
powerpc64le.  As noted for a previous patch, powerpc64le's use of
ldbl-opt means various long double functions get defined using
long_double_symbol which gives them an explicit symbol version in the
object files, and this patch results in some such functions using
weak_alias instead (because powerpc64le never had a previous version
of these functions for long double = double); both produce a valid
libm.so with the same public symbols at the same versions, but macros
expanding to call weak_alias is cleaner in this case.

	* math/s_fmal.c: Include <libm-alias-ldouble.h>.
	(fmal): Define using libm_alias_ldouble.
	* math/w_acoshl_compat.c: Include <libm-alias-ldouble.h>.
	(acoshl): Define using libm_alias_ldouble.
	* math/w_acosl_compat.c: Include <libm-alias-ldouble.h>.
	(acosl): Define using libm_alias_ldouble.
	* math/w_asinl_compat.c: Include <libm-alias-ldouble.h>.
	(asinl): Define using libm_alias_ldouble.
	* math/w_atan2l_compat.c: Include <libm-alias-ldouble.h>.
	(atan2l): Define using libm_alias_ldouble.
	* math/w_atanhl_compat.c: Include <libm-alias-ldouble.h>.
	(atanhl): Define using libm_alias_ldouble.
	* math/w_coshl_compat.c: Include <libm-alias-ldouble.h>.
	(coshl): Define using libm_alias_ldouble.
	* math/w_exp10l_compat.c: Include <libm-alias-ldouble.h>.
	(exp10l): Define using libm_alias_ldouble.
	* math/w_exp2l_compat.c: Include <libm-alias-ldouble.h>.
	(exp2l): Define using libm_alias_ldouble.
	* math/w_expl_compat.c: Include <libm-alias-ldouble.h>.
	(expl): Define using libm_alias_ldouble.
	* math/w_fmodl_compat.c: Include <libm-alias-ldouble.h>.
	(fmodl): Define using libm_alias_ldouble.
	* math/w_hypotl_compat.c: Include <libm-alias-ldouble.h>.
	(hypotl): Define using libm_alias_ldouble.
	* math/w_j0l_compat.c: Include <libm-alias-ldouble.h>.
	(j0l): Define using libm_alias_ldouble.
	(y0l): Likewise.
	* math/w_j1l_compat.c: Include <libm-alias-ldouble.h>.
	(j1l): Define using libm_alias_ldouble.
	(y1l): Likewise.
	* math/w_jnl_compat.c: Include <libm-alias-ldouble.h>.
	(jnl): Define using libm_alias_ldouble.
	(ynl): Likewise.
	* math/w_log10l_compat.c: Include <libm-alias-ldouble.h>.
	(log10l): Define using libm_alias_ldouble.
	* math/w_log2l_compat.c: Include <libm-alias-ldouble.h>.
	(log2l): Define using libm_alias_ldouble.
	* math/w_logl_compat.c: Include <libm-alias-ldouble.h>.
	(logl): Define using libm_alias_ldouble.
	* math/w_powl_compat.c: Include <libm-alias-ldouble.h>.
	(powl): Define using libm_alias_ldouble.
	* math/w_remainderl_compat.c: Include <libm-alias-ldouble.h>.
	(remainderl): Define using libm_alias_ldouble.
	* math/w_sinhl_compat.c: Include <libm-alias-ldouble.h>.
	(sinhl): Define using libm_alias_ldouble.
	* math/w_sqrtl_compat.c: Include <libm-alias-ldouble.h>.
	(sqrtl): Define using libm_alias_ldouble.
	* math/w_tgammal_compat.c: Include <libm-alias-ldouble.h>.
	(tgammal): Define using libm_alias_ldouble.
	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c [LIBM_SVID_COMPAT]
	(exp10l): Do not use long_double_symbol here.
	* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c
	[LIBM_SVID_COMPAT] (remainderl): Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fmal.c: Remove.
	* sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise.
 2017-09-18 17:51:33 +00:00
Joseph Myers
9ac4470888 Use libm_alias_double in math/. 
This patch converts libm function implementations in math/ from using
weak_alias to using libm_alias_double to define public function names,
in cases where it would be appropriate to define _Float64 / _Float32x
aliases for those functions as well.  This eliminates many
NO_LONG_DOUBLE conditionals and ldbl-opt wrappers round these function
implementations.

Tested for x86_64.  Also tested with build-many-glibcs.py.  Binary
differences seen are that the different order in which remainder and
drem symbols get defined as a result of this patch (the same source
file defines the same aliases, but in a different order of definition)
changes the order of symbols in the final libm.so when long double =
double, and for ldbl-opt configurations, the compat symbols for Bessel
functions were previously defined by e.g. "compat_symbol (libm, j0,
j0l, GLIBC_2_0)", which declares j0l as a compat symbol based on j0
and so makes j0l weak because j0 is weak, and are now defined
(indirectly via the relevant macros) based on e.g. __j0, so are no
longer weak because __j0 isn't weak.

	* math/s_fma.c: Include <libm-alias-double.h>.
	(fma): Define using libm_alias_double.
	* math/s_nextafter.c: Include <libm-alias-double.h>.
	(nextafter): Define using libm_alias_double.
	* math/w_acos_compat.c: Include <libm-alias-double.h>.
	(acos): Define using libm_alias_double.
	* math/w_acosh_compat.c: Include <libm-alias-double.h>.
	(aocsh): Define using libm_alias_double.
	* math/w_asin_compat.c: Include <libm-alias-double.h>.
	(asin): Define using libm_alias_double.
	* math/w_atan2_compat.c: Include <libm-alias-double.h>.
	(atan2): Define using libm_alias_double.
	* math/w_atanh_compat.c: Include <libm-alias-double.h>.
	(atanh): Define using libm_alias_double.
	* math/w_cosh_compat.c: Include <libm-alias-double.h>.
	(cosh): Define using libm_alias_double.
	* math/w_exp10_compat.c: Include <libm-alias-double.h>.
	(exp10): Define using libm_alias_double.
	* math/w_exp2_compat.c: Include <libm-alias-double.h>.
	(exp2): Define using libm_alias_double.
	* math/w_exp_compat.c: Include <libm-alias-double.h>.
	(exp): Define using libm_alias_double.
	* math/w_fmod_compat.c: Include <libm-alias-double.h>.
	(fmod): Define using libm_alias_double.
	* math/w_hypot_compat.c: Include <libm-alias-double.h>.
	(hypot): Define using libm_alias_double.
	* math/w_j0_compat.c: Include <libm-alias-double.h>.
	(j0): Define using libm_alias_double.
	(y0): Likewise.
	* math/w_j1_compat.c: Include <libm-alias-double.h>.
	(j1): Define using libm_alias_double.
	(y1): Likewise.
	* math/w_jn_compat.c: Include <libm-alias-double.h>.
	(jn): Define using libm_alias_double.
	(yn): Likewise.
	* math/w_log10_compat.c: Include <libm-alias-double.h>.
	(log10): Define using libm_alias_double.
	* math/w_log2_compat.c: Include <libm-alias-double.h>.
	(log2): Define using libm_alias_double.
	* math/w_log_compat.c: Include <libm-alias-double.h>.
	(log): Define using libm_alias_double.
	* math/w_pow_compat.c: Include <libm-alias-double.h>.
	(pow): Define using libm_alias_double.
	* math/w_remainder_compat.c: Include <libm-alias-double.h>.
	(remainder): Define using libm_alias_double.
	* math/w_sinh_compat.c: Include <libm-alias-double.h>.
	(sinh): Define using libm_alias_double.
	* math/w_sqrt_compat.c: Include <libm-alias-double.h>.
	(sqrt): Define using libm_alias_double.
	* math/w_tgamma_compat.c: Include <libm-alias-double.h>.
	(tgamma): Define using libm_alias_double.
	* sysdeps/ieee754/ldbl-opt/s_nextafter.c [LONG_DOUBLE_COMPAT(libm,
	GLIBC_2_0)] (nextafterl): Do not define compat symbol here.
	* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c
	[LONG_DOUBLE_COMPAT(libm, GLIBC_2_1)] (exp10l): Likewise.
	* sysdeps/ieee754/ldbl-opt/w_remainder_compat.c
	[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (remainderl): Likewise.
	* sysdeps/ieee754/ldbl-opt/w_acos_compat.c: Remove.
	* sysdeps/ieee754/ldbl-opt/w_acosh_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_asin_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atan2_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atanh_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_cosh_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_fmod_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_hypot_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j0_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j1_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_jn_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log10_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log2_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_pow_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sinh_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sqrt_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_tgamma_compat.c: Likewise.
 2017-09-15 23:10:02 +00:00
Joseph Myers
01f2881245 Make more libm functions into weak aliases. 
Many libm functions define the function as __<func> and then define
<func> as a weak alias.  This is not at all limited to cases where
there is an internal call that has namespace reasons to need to call
__<func> instead of <func>.

The common macros for creating libm function aliases work on the basis
of public function names all being aliases; that is, they define
aliases for functions using the above pattern.  Thus, where a function
just defines the public name <func> directly, changing that to be a
weak alias enables a subsequent conversion to the common macros to
retain the exact existing symbols (and so be testable by comparison of
stripped binaries).

This patch converts many existing functions to use the weak alias
pattern, as preparation for subsequent conversions to common macros.
I do expect that _FloatN/_FloatNx function aliases will end up needing
new variants of the common macros that do *not* create the original
float / double / long double name of a function - for cases where that
name is created specially to give it a particular symbol version, for
example - but for functions that can use the most common macros to
create all the public names as aliases, it makes sense for them to do
so.

Regarding the Bessel function wrappers in this patch: only float and
double wrappers are changed because the long double wrappers already
used the weak alias pattern.

Tested for x86_64, and with build-many-glibcs.py.

	* include/math.h (roundeven): Change hidden_proto call to
	__roundeven.
	* math/w_j0_compat.c (j0): Rename to __j0 and define as weak
	alias.
	[NO_LONG_DOUBLE] (__j0l): New strong alias.
	(y0): Rename to __y0 and define as weak alias.
	[NO_LONG_DOUBLE] (__y0l): New strong alias.
	* math/w_j0f_compat.c (j0f): Rename to __j0f and define as weak
	alias.
	(y0f): Rename to __y0f and define as weak alias.
	* math/w_j1_compat.c (j1): Rename to __j1 and define as weak
	alias.
	[NO_LONG_DOUBLE] (__j1l): New strong alias.
	(y1): Rename to __y1 and define as weak alias.
	[NO_LONG_DOUBLE] (__y1l): New strong alias.
	* math/w_j1f_compat.c (j1f): Rename to __j1f and define as weak
	alias.
	(y1f): Rename to __y1f and define as weak alias.
	* math/w_jn_compat.c (jn): Rename to __jn and define as weak
	alias.
	[NO_LONG_DOUBLE] (__jnl): New strong alias.
	(yn): Rename to __yn and define as weak alias.
	[NO_LONG_DOUBLE] (__ynl): New strong alias.
	* math/w_jnf_compat.c (jnf): Rename to __jnf and define as weak
	alias.
	(ynf): Rename to __ynf and define as weak alias.
	* sysdeps/ieee754/dbl-64/s_fromfp.c (FUNC): Define to __fromfp.
	(fromfp): Define as weak alias.
	[NO_LONG_DOUBLE] (__fromfpl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c (FUNC): Define to __fromfpx.
	(fromfpx): Define as weak alias.
	[NO_LONG_DOUBLE] (__fromfpxl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_getpayload.c (getpayload): Rename to
	__getpayload and define as weak alias.
	[NO_LONG_DOUBLE] (__getpayloadl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_roundeven.c (roundeven): Rename to
	__roundeven and define as weak alias.
	[NO_LONG_DOUBLE] (__roundevenl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_setpayload.c (FUNC): Define to
	__setpayload.
	(setpayload): Define as weak alias.
	[NO_LONG_DOUBLE] (__setpayloadl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c (FUNC): Define to
	__setpayloadsig.
	(setpayloadsig): Define as weak alias.
	[NO_LONG_DOUBLE] (__setpayloadsigl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_totalorder.c (totalorder): Rename to
	__totalorder and define as weak alias.
	[NO_LONG_DOUBLE] (__totalorderl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c (totalordermag): Rename
	to __totalordermag and define as weak alias.
	[NO_LONG_DOUBLE] (__totalordermagl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c (FUNC): Define to __ufromfp.
	(ufromfp): Define as weak alias.
	[NO_LONG_DOUBLE] (__ufromfpl): New strong alias.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c (FUNC): Define to
	__ufromfpx.
	(ufromfpx): Define as weak alias.
	[NO_LONG_DOUBLE] (__ufromfpxl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c (getpayload):
	Rename to __getpayload and define as weak alias.
	[NO_LONG_DOUBLE] (__getpayloadl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c (roundeven):
	Rename to __roundeven and define as weak alias.
	[NO_LONG_DOUBLE] (__roundevenl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c (totalorder):
	Rename to __totalorder and define as weak alias.
	[NO_LONG_DOUBLE] (__totalorderl): New strong alias.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c
	(totalordermag): Rename to __totalordermag and define as weak
	alias.
	[NO_LONG_DOUBLE] (__totalordermagl): New strong alias.
	* sysdeps/ieee754/float128/float128_private.h (__getpayloadl): New
	macro.
	(__roundevenl): Likewise.
	(__totalorderl): Likewise.
	(__totalordermagl): Likewise
	* sysdeps/ieee754/float128/s_fromfpf128.c (FUNC): Define to
	__fromfpf128.
	(fromfpf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_fromfpxf128.c (FUNC): Define to
	__fromfpxf128.
	(fromfpxf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_setpayloadf128.c (FUNC): Define to
	__setpayloadf128.
	(setpayloadf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_setpayloadsigf128.c (FUNC): Define to
	__setpayloadsigf128.
	(setpayloadsigf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_ufromfpf128.c (FUNC): Define to
	__ufromfpf128.
	(ufromfpf128): Define as weak alias.
	* sysdeps/ieee754/float128/s_ufromfpxf128.c (FUNC): Define to
	__ufromfpxf128.
	(ufromfpxf128): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_fromfpf.c (FUNC): Define to __fromfpf.
	(fromfpf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c (FUNC): Define to
	__fromfpxf.
	(fromfpxf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c (getpayloadf): Rename to
	__getpayloadf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_roundevenf.c (roundevenf): Rename to
	__roundevenf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c (FUNC): Define to
	__setpayloadf.
	(setpayloadf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c (FUNC): Define to
	__setpayloadsigf.
	(setpayloadsigf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_totalorderf.c (totalorderf): Rename to
	__totalorderf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c (totalordermagf):
	Rename to __totalordermagf and define as weak alias.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c (FUNC): Define to
	__ufromfpf.
	(ufromfpf): Define as weak alias.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c (FUNC): Define to
	__ufromfpxf.
	(ufromfpxf): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c (FUNC): Define to
	__fromfpl.
	(fromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c (FUNC): Define to
	__fromfpxl.
	(fromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Rename
	to __getpayloadl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c (roundevenl): Rename to
	__roundevenl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c (FUNC): Define to
	__setpayloadl.
	(setpayloadl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c (FUNC): Define to
	__setpayloadsigl.
	(setpayloadsigl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c (totalorderl): Rename
	to __totalorderl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c (totalordermagl):
	Rename to __totalordermagl and define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c (FUNC): Define to
	__ufromfpl.
	(ufromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c (FUNC): Define to
	__ufromfpxl.
	(ufromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c (FUNC): Define to
	__fromfpl.
	(fromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c (FUNC): Define to
	__fromfpxl.
	(fromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c (getpayloadl):
	Rename to __getpayloadl and define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c (roundevenl): Rename
	to __roundevenl and define as weak alias.  Call __roundeven
	instead of roundeven.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c (FUNC): Define to
	__setpayloadl.
	(setpayloadl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c (FUNC): Define to
	__setpayloadsigl.
	(setpayloadsigl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c (totalorderl):
	Rename to __totalorderl and define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c (totalordermagl):
	Rename to __totalordermagl and define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c (FUNC): Define to
	__ufromfpl.
	(ufromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c (FUNC): Define to
	__ufromfpxl.
	(ufromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c (FUNC): Define to
	__fromfpl.
	(fromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c (FUNC): Define to
	__fromfpxl.
	(fromfpxl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c (getpayloadl): Rename to
	__getpayloadl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c (roundevenl): Rename to
	__roundevenl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c (FUNC): Define to
	__setpayloadl.
	(setpayloadl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c (FUNC): Define to
	__setpayloadsigl.
	(setpayloadsigl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c (totalorderl): Rename to
	__totalorderl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c (totalordermagl):
	Rename to __totalordermagl and define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c (FUNC): Define to
	__ufromfpl.
	(ufromfpl): Define as weak alias.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c (FUNC): Define to
	__ufromfpxl.
	(ufromfpxl): Define as weak alias.
 2017-09-14 22:28:53 +00:00
Joseph Myers
1aae75ef80 Define and use libm_alias_ldouble. 
Continuing the process of setting up common macros for libm function
aliases, with a view to using them to define _FloatN / _FloatNx
aliases in future, this patch adds a libm_alias_ldouble macro and uses
it in the type-generic templates.

Since math-type-macros-ldouble.h already did the appropriate thing for
each symbol (weak_alias or long_double_symbol), this is just a
straightforward rearrangement of code, to make the required logic
available in a place that can also be used outside of the type-generic
templates in future (in particular, to eliminate various wrappers for
functions in ldbl-opt and ldbl-64-128).

Tested for x86_64.  Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.

	* sysdeps/generic/libm-alias-ldouble.h: New file.
	* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Likewise.
	* sysdeps/ieee754/ldbl-opt/math-type-macros-ldouble.h: Remove.
	* sysdeps/generic/math-type-macros-ldouble.h: Include
	<libm-alias-ldouble.h>.
	[!declare_mgen_alias] (declare_mgen_alias): Define to use
	libm_alias_ldouble.
 2017-09-13 22:17:23 +00:00
Szabolcs Nagy
bcea7ad608 Move exp compat wrappers under math/ 
Move exp compat wrappers to math/w_exp{,f,l}_compat.c to be
consistent with other wrappers.

	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Move to...
	* math/w_exp_compat.c: ... here.
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Move to...
	* math/w_expf_compat.c: ... here.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Move to...
	* math/w_expl_compat.c: ... here.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Remove.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Remove.
	* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Use the new path.
	* sysdeps/ieee754/ldbl-opt/w_expl_compat.c: Likewise.
 2017-09-13 17:22:22 +01:00
Joseph Myers
0fc56478a9 Clear up log1p, ldexp, scalbn, scalbln compat handling. 
This patch cleans up how compat symbols / long double versioning are
handled for log1p, ldexp, scalbn and scalbln functions.

The general principle is to do as much as possible through the
type-generic templates.  Previously, when errno-setting wrappers were
added the compat long double symbols were left pointing directly to
the underlying implementations; they are moved to point to the
errno-setting wrappers.  For the functions also present in libc,
compat symbol handling for the libc copies needs to go in ldbl-opt
wrappers, but the type-generic templates can handle it for the libm
copies.  There is no need for w_scalbln_template.c to disable the
creation of an unused internal alias (such code made sense in the
context of patches trying to avoid any changes to generated code for
ease of comparison, but can be removed in a change that specifically
does intend to change details of where symbols point).

Tested for x86_64, and with build-many-glibcs.py.

	* math/w_scalbln_template.c (strong_alias): Do not undefine and
	redefine.
	* sysdeps/ieee754/ldbl-opt/s_ldexp.c (declare_mgen_alias): Remove
	macro.
	(ldexpl): Only define as compat symbol for libc, not libm.
	(scalbnl): Define as compat symbol for libc here.
	* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (declare_mgen_alias): Only
	define for [IS_IN (libc)].
	(__ldexpl_2): Remove alias.
	(ldexpl): Only define with long_double_symbol if [IS_IN (libc)].
	(scalbnl): Likewise.  Use __wrap_scalbnl not __ldexpl_2 as base
	name in long_double_symbol call.
	* sysdeps/ieee754/ldbl-opt/s_log1p.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/s_scalbln.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_scalbn.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log1p.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_scalbln.c (declare_mgen_alias):
	Remove macro.
	[IS_IN (libc) && LONG_DOUBLE_COMPAT (libc, GLIBC_2_1)] (scalblnl):
	Define as compat symbol.
 2017-09-13 15:47:26 +00:00
Joseph Myers
620ff9eea6 Define and use libm_alias_double. 
Continuing the process of setting up common macros for libm function
aliases, with a view to using them to define _FloatN / _FloatNx
aliases in future, this patch adds a libm_alias_double macro and uses
it in the type-generic templates.

This macro handles defining aliases for double, and for long double in
the NO_LONG_DOUBLE case.  It also handles defining compat symbols for
long double = double for architectures that changed their long double
format.  By so doing, it eliminates the need for the
M_LIBM_NEED_COMPAT and declare_mgen_libm_compat macros; the single
declare_mgen_alias call in each template now suffices to define all
required compat symbols.  When used for more double functions (not
based on type-generic templates), I expect it will eliminate the need
for most ldbl-opt wrappers for such functions.

A few special cases are needed.  __clog10l is a public symbol (for
historical reasons) so needs to be given appropriate compat versions
for architectures that changed their long double format, but is not
defined as an alias using the normal macros since __clog10* are *not*
public symbols for _FloatN / _FloatNx types.  For scalbn, scalbln and
log1p, the changes adding errno setting support for those functions
left compat symbols pointing directly to the non-errno-setting
implementations.  There is no requirement for the compat symbols not
to set errno; that just made for the simplest patches at that time.
Now, with these common macros, it's natural to redirect the compat
symbols to the errno-setting wrappers, which I intend to do in a
separate patch.

Tested for x86_64, and with build-many-glibcs.py.  For ldbl-opt
platforms the stripped libm.so binaries are changed (disassembly
unchanged) because the details of how the clog10l compat symbol is
created mean it ceases to be weak as it was before; for other
platforms, stripped libm.so binaries are unchanged.

2017-09-13  Joseph Myers  <joseph@codesourcery.com>

	* sysdeps/generic/libm-alias-double.h: New file.
	* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Likewise.
	* sysdeps/generic/math-type-macros-double.h: Include
	<libm-alias-double.h>.
	[declare_mgen_alias] (declare_mgen_alias): Define to use
	libm_alias_double.
	* sysdeps/generic/math-type-macros.h [!M_LIBM_NEED_COMPAT]
	(M_LIBM_NEED_COMPAT): Remove macro.
	[!M_LIBM_NEED_COMPAT] (declare_mgen_libm_compat): Likewise.
	* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h: Remove.
	* math/cabs_template.c [M_LIBM_NEED_COMPAT]: Remove conditional
	code.
	* math/carg_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/cimag_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/conj_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/creal_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_cacos_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_cacosh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_casin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_casinh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_catan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_catanh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_ccos_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_ccosh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_cexp_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_clog10_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_clog_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_cpow_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_cproj_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_csin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_csinh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_csqrt_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_ctan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_ctanh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_fdim_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_fmax_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_fmin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/s_nan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* math/w_ilogb_template.c [M_LIBM_NEED_COMPAT]: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_ldexp.c (M_LIBM_NEED_COMPAT): Remove
	macro.
	(declare_mgen_alias): New macro.
	* sysdeps/ieee754/ldbl-opt/w_log1p.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_scalbln.c: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c
	(M_LIBM_NEED_COMPAT): Remove macro.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c
	[HAVE_AS_VIS3_SUPPORT]: Include <math_ldbl_opt.h> and
	<first-versions.h>.
	[HAVE_AS_VIS3_SUPPORT && LONG_DOUBLE_COMPAT (libm,
	FIRST_VERSION_libm_fdiml)]: Define fdiml as compat symbol.
 2017-09-13 01:13:30 +00:00
Joseph Myers
4f3647e46e Prefer new libm function wrappers for !LIBM_SVID_COMPAT. 
The initial obsoletion of SVID libm error handling left the old
wrappers and __kernel_standard still being used for new ports and
static linking, just with macro definitions of _LIB_VERSION and
matherr that meant symbols with those names were never actually used
and the code for different error handling variants could be optimized
out.

This patch cleans things up further by eliminating the
__kernel_standard use for new ports and static linking.  Now, the old
wrappers no longer generate any code in the !LIBM_SVID_COMPAT case,
while the new errno-only wrappers that were added for float128 support
are now also used for float, double and long double in that case.

The changes are generally straightforward.  The w_scalb*_compat
wrappers continue to be used (scalb is obsolescent in the sense of not
being supported for float128, but is present in supported standards -
the 2001 edition of POSIX and earlier XSI versions - so remains
supported for static linking and new ports, as do the float and long
double variants that are existing GNU extensions).  Those wrappers
would only call __kernel_standard in the _LIB_VERSION == _SVID_ case.
Since we would like to be able to compile most of glibc without
optimization, relying on a static function whose only use is under an
if (0) condition being optimized away to avoid an undefined
__kernel_standard reference may not be a good idea.  Thus, the
relevant code in the scalb wrappers has LIBM_SVID_COMPAT conditionals
added to guarantee it's not built at all in the case where
__kernel_standard does not exist.

Just as i386 has its own w_sqrt_compat.c, so w_sqrt.c is also added.
ia64 gets dummy w_*.c to prevent those files being built where they
would conflict with the ia64 libm, as with its existing w_*_compat.c.

Conditions disabling code for !LIBM_SVID_COMPAT are needed in both the
math/ wrappers and in the long double wrappers in ldbl-opt (to avoid
them setting up aliases and symbol versions for undefined symbols).  I
hope that future cleanups to how libm function aliases and symbol
versioning are done will eliminate the need for most of the ldbl-opt
wrappers.

Tested for x86_64 and x86, and with build-many-glibcs.py.

	* sysdeps/generic/math-type-macros-double.h: Include
	<math-svid-compat.h>.
	(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
	* sysdeps/generic/math-type-macros-float.h: Include
	<math-svid-compat.h>.
	(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
	* sysdeps/generic/math-type-macros-ldouble.h: Include
	<math-svid-compat.h>.
	(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
	* math/lgamma-compat.h (BUILD_LGAMMA): Include LIBM_SVID_COMPAT
	condition.
	* math/w_acos_compat.c: Condition contents on [LIBM_SVID_COMPAT].
	* math/w_acosf_compat.c: Likewise.
	* math/w_acosh_compat.c: Likewise.
	* math/w_acoshf_compat.c: Likewise.
	* math/w_acoshl_compat.c: Likewise.
	* math/w_acosl_compat.c: Likewise.
	* math/w_asin_compat.c: Likewise.
	* math/w_asinf_compat.c: Likewise.
	* math/w_asinl_compat.c: Likewise.
	* math/w_atan2_compat.c: Likewise.
	* math/w_atan2f_compat.c: Likewise.
	* math/w_atan2l_compat.c: Likewise.
	* math/w_atanh_compat.c: Likewise.
	* math/w_atanhf_compat.c: Likewise.
	* math/w_atanhl_compat.c: Likewise.
	* math/w_cosh_compat.c: Likewise.
	* math/w_coshf_compat.c: Likewise.
	* math/w_coshl_compat.c: Likewise.
	* math/w_exp10_compat.c: Likewise.
	* math/w_exp10f_compat.c: Likewise.
	* math/w_exp10l_compat.c: Likewise.
	* math/w_exp2_compat.c: Likewise.
	* math/w_exp2f_compat.c: Likewise.
	* math/w_exp2l_compat.c: Likewise.
	* math/w_fmod_compat.c: Likewise.
	* math/w_fmodf_compat.c: Likewise.
	* math/w_fmodl_compat.c: Likewise.
	* math/w_hypot_compat.c: Likewise.
	* math/w_hypotf_compat.c: Likewise.
	* math/w_hypotl_compat.c: Likewise.
	* math/w_j0_compat.c: Likewise.
	* math/w_j0f_compat.c: Likewise.
	* math/w_j0l_compat.c: Likewise.
	* math/w_j1_compat.c: Likewise.
	* math/w_j1f_compat.c: Likewise.
	* math/w_j1l_compat.c: Likewise.
	* math/w_jn_compat.c: Likewise.
	* math/w_jnf_compat.c: Likewise.
	* math/w_jnl_compat.c: Likewise.
	* math/w_lgamma_r_compat.c: Likewise.
	* math/w_lgammaf_r_compat.c: Likewise.
	* math/w_lgammal_r_compat.c: Likewise.
	* math/w_log10_compat.c: Likewise.
	* math/w_log10f_compat.c: Likewise.
	* math/w_log10l_compat.c: Likewise.
	* math/w_log2_compat.c: Likewise.
	* math/w_log2f_compat.c: Likewise.
	* math/w_log2l_compat.c: Likewise.
	* math/w_log_compat.c: Likewise.
	* math/w_logf_compat.c: Likewise.
	* math/w_logl_compat.c: Likewise.
	* math/w_pow_compat.c: Likewise.
	* math/w_powf_compat.c: Likewise.
	* math/w_powl_compat.c: Likewise.
	* math/w_remainder_compat.c: Likewise.
	* math/w_remainderf_compat.c: Likewise.
	* math/w_remainderl_compat.c: Likewise.
	* math/w_sinh_compat.c: Likewise.
	* math/w_sinhf_compat.c: Likewise.
	* math/w_sinhl_compat.c: Likewise.
	* math/w_sqrt_compat.c: Likewise.
	* math/w_sqrtf_compat.c: Likewise.
	* math/w_sqrtl_compat.c: Likewise.
	* math/w_tgamma_compat.c: Likewise.
	* math/w_tgammaf_compat.c: Likewise.
	* math/w_tgammal_compat.c: Likewise.
	* math/w_scalb_compat.c (sysv_scalb): Condition definition on
	[LIBM_SVID_COMPAT].
	(__scalb): Condition call to sysv_scalb on [LIBM_SVID_COMPAT].
	* math/w_scalbf_compat.c (sysv_scalbf): Condition definition on
	[LIBM_SVID_COMPAT].
	(__scalbf): Condition call to sysv_scalbf on [LIBM_SVID_COMPAT].
	* math/w_scalbl_compat.c (sysv_scalbl): Condition definition on
	[LIBM_SVID_COMPAT].
	(__scalbl): Condition call to sysv_scalbl on [LIBM_SVID_COMPAT].
	* sysdeps/i386/fpu/w_sqrt.c: New file.
	* sysdeps/ia64/fpu/w_acos.c: Likewise.
	* sysdeps/ia64/fpu/w_acosf.c: Likewise.
	* sysdeps/ia64/fpu/w_acosh.c: Likewise.
	* sysdeps/ia64/fpu/w_acoshf.c: Likewise.
	* sysdeps/ia64/fpu/w_acoshl.c: Likewise.
	* sysdeps/ia64/fpu/w_acosl.c: Likewise.
	* sysdeps/ia64/fpu/w_asin.c: Likewise.
	* sysdeps/ia64/fpu/w_asinf.c: Likewise.
	* sysdeps/ia64/fpu/w_asinl.c: Likewise.
	* sysdeps/ia64/fpu/w_atan2.c: Likewise.
	* sysdeps/ia64/fpu/w_atan2f.c: Likewise.
	* sysdeps/ia64/fpu/w_atan2l.c: Likewise.
	* sysdeps/ia64/fpu/w_atanh.c: Likewise.
	* sysdeps/ia64/fpu/w_atanhf.c: Likewise.
	* sysdeps/ia64/fpu/w_atanhl.c: Likewise.
	* sysdeps/ia64/fpu/w_cosh.c: Likewise.
	* sysdeps/ia64/fpu/w_coshf.c: Likewise.
	* sysdeps/ia64/fpu/w_coshl.c: Likewise.
	* sysdeps/ia64/fpu/w_exp.c: Likewise.
	* sysdeps/ia64/fpu/w_exp10.c: Likewise.
	* sysdeps/ia64/fpu/w_exp10f.c: Likewise.
	* sysdeps/ia64/fpu/w_exp10l.c: Likewise.
	* sysdeps/ia64/fpu/w_exp2.c: Likewise.
	* sysdeps/ia64/fpu/w_exp2f.c: Likewise.
	* sysdeps/ia64/fpu/w_exp2l.c: Likewise.
	* sysdeps/ia64/fpu/w_expf.c: Likewise.
	* sysdeps/ia64/fpu/w_expl.c: Likewise.
	* sysdeps/ia64/fpu/w_fmod.c: Likewise.
	* sysdeps/ia64/fpu/w_fmodf.c: Likewise.
	* sysdeps/ia64/fpu/w_fmodl.c: Likewise.
	* sysdeps/ia64/fpu/w_hypot.c: Likewise.
	* sysdeps/ia64/fpu/w_hypotf.c: Likewise.
	* sysdeps/ia64/fpu/w_hypotl.c: Likewise.
	* sysdeps/ia64/fpu/w_lgamma_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammal_r.c: Likewise.
	* sysdeps/ia64/fpu/w_log.c: Likewise.
	* sysdeps/ia64/fpu/w_log10.c: Likewise.
	* sysdeps/ia64/fpu/w_log10f.c: Likewise.
	* sysdeps/ia64/fpu/w_log10l.c: Likewise.
	* sysdeps/ia64/fpu/w_log2.c: Likewise.
	* sysdeps/ia64/fpu/w_log2f.c: Likewise.
	* sysdeps/ia64/fpu/w_log2l.c: Likewise.
	* sysdeps/ia64/fpu/w_logf.c: Likewise.
	* sysdeps/ia64/fpu/w_logl.c: Likewise.
	* sysdeps/ia64/fpu/w_pow.c: Likewise.
	* sysdeps/ia64/fpu/w_powf.c: Likewise.
	* sysdeps/ia64/fpu/w_powl.c: Likewise.
	* sysdeps/ia64/fpu/w_remainder.c: Likewise.
	* sysdeps/ia64/fpu/w_remainderf.c: Likewise.
	* sysdeps/ia64/fpu/w_remainderl.c: Likewise.
	* sysdeps/ia64/fpu/w_sinh.c: Likewise.
	* sysdeps/ia64/fpu/w_sinhf.c: Likewise.
	* sysdeps/ia64/fpu/w_sinhl.c: Likewise.
	* sysdeps/ia64/fpu/w_sqrt.c: Likewise.
	* sysdeps/ia64/fpu/w_sqrtf.c: Likewise.
	* sysdeps/ia64/fpu/w_sqrtl.c: Likewise.
	* sysdeps/ia64/fpu/w_tgamma.c: Likewise.
	* sysdeps/ia64/fpu/w_tgammaf.c: Likewise.
	* sysdeps/ia64/fpu/w_tgammal.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Condition contents on
	[LIBM_SVID_COMPAT].
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
	* sysdeps/ieee754/k_standard.c: Likewise.
	* sysdeps/ieee754/k_standardf.c: Likewise.
	* sysdeps/ieee754/k_standardl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: Condition
	long_double_symbol call on [LIBM_SVID_COMPAT].
	* sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c: Condition
	long_double_symbol and compat_symbol calls on [LIBM_SVID_COMPAT].
 2017-09-05 23:35:55 +00:00
Joseph Myers
5a80d39d0d Obsolete pow10 functions. 
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking).  The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.

Tested for x86_64, and with build-many-glibcs.py.

	* manual/math.texi (pow10): Do not document.
	(pow10f): Likewise.
	(pow10l): Likewise.
	* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
	* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
	* math/libm-test-exp10.inc (pow10_test): Remove.
	(do_test): Do not call pow10.
	* math/w_exp10_compat.c (pow10): Make into compat symbol.
	[NO_LONG_DOUBLE] (pow10l): Likewise.
	* math/w_exp10f_compat.c (pow10f): Likewise.
	* math/w_exp10l_compat.c (pow10l): Likewise.
	* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
	(pow10): Make into compat symbol.
	* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
	(pow10f): Make into compat symbol.
	* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
	(pow10l): Make into compat symbol.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
	pow10.
	(CFLAGS-nldbl-pow10.c): Remove variable..
	* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
	[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
	Undefine and redefine.
	(pow10l): Make into compat symbol.
	* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
	* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
	* sysdeps/arm/libm-test-ulps: Likewise.
	* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
	* sysdeps/microblaze/libm-test-ulps: Likewise.
	* sysdeps/mips/mips32/libm-test-ulps: Likewise.
	* sysdeps/mips/mips64/libm-test-ulps: Likewise.
	* sysdeps/nios2/libm-test-ulps: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
	* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps: Likewise.
	* sysdeps/sh/libm-test-ulps: Likewise.
	* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
	* sysdeps/tile/libm-test-ulps: Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2017-09-01 21:13:18 +00:00
Joseph Myers
c0c49d60cf Simplify NAN definitions. 
Similar to my patches for HUGE_VAL and INFINITY. this patch eliminates
the bits/nan.h headers.  __builtin_nanf ("") is used to define NAN for
GCC 3.3 and later; the fallback is (0.0f / 0.0f), which is a constant
expression for a quiet NaN of type float, but raises a spurious
"invalid" exception outside static initializers, which seems the best
that can be done purely in standard C.  Again, if anyone actually uses
a compiler with its own incompatible extension for producing a
constant quiet NaN, we can add compiler conditionals.

Tested for x86_64.

	*  math/math.h [__USE_ISOC99] (NAN): Define directly here.  Do not
	include <bits/nan.h>.
	* math/Makefile (headers): Remove bits/nan.h.
	* bits/nan.h: Remove.
	* sysdeps/ieee754/bits/nan.h: Likewise.
	* sysdeps/mips/bits/nan.h: Likewise.
 2017-08-31 16:39:25 +00:00
Joseph Myers
5ef1b2138d Simplify INFINITY definitions. 
Similar to my patch for HUGE_VAL, this patch eliminates the bits/inf.h
headers and just unconditionally uses the same definitions as the
sysdeps/ieee754 version did (__builtin_inff () for GCC >= 3.3,
otherwise HUGE_VALF), directly in math.h, so removing an unnecessary
level of indirection.

Tested for x86_64.

	* math/math.h [__USE_ISOC99] (INFINITY): Define directly here.  Do
	not include <bits/inf.h>.
	* math/Makefile (headers): Remove bits/inf.h.
	* bits/inf.h: Remove.
	* sysdeps/ieee754/bits/inf.h: Likewise.
 2017-08-31 16:12:46 +00:00
Joseph Myers
a60eca2e55 Simplify HUGE_VAL definitions. 
There are various bits/huge_val*.h headers to define HUGE_VAL and
related macros.  All of them use __builtin_huge_val etc. for GCC 3.3
and later.  Then there are various fallbacks, such as using a large
hex float constant for GCC 2.96 and later, or using unions (with or
without compound literals) to construct the bytes of an infinity, with
this last being the reason for having architecture-specific files.
Supporting TS 18661-3 _FloatN / _FloatNx types that have the same
format as other supported types will mean adding more such macros;
needing to add more headers for them doesn't seem very desirable.

The fallbacks based on bytes of the representation of an infinity do
not meet the standard requirements for a constant expression.  At
least one of them is also wrong: sysdeps/sh/bits/huge_val.h is
producing a mixed-endian representation which does not match what GCC
does.

This patch eliminates all those headers, defining the macros directly
in math.h.  For GCC 3.3 and later, the built-in functions are used as
now.  For other compilers, a large constant 1e10000 (with appropriate
suffix) is used.  This is like the fallback for GCC 2.96 and later,
but without using hex floats (which have no apparent advantage here).
It is unambiguously valid standard C for all floating-point formats
with infinities, which covers all formats supported by glibc or likely
to be supported by glibc in future (C90 DR#025 said that if a
floating-point format represents infinities, all real values lie
within the range of representable values, so the constraints for
constant expressions are not violated), but may generate compiler
warnings and wouldn't handle the TS 18661-1 FENV_ROUND pragma
correctly.  If someone is actually using a compiler with glibc that
does not claim to be GCC 3.3 or later, but which has a better way to
define the HUGE_VAL macros, we can always add compiler conditionals in
with alternative definitions.

I intend to make similar changes for INF and NAN.  The SNAN macros
already just use __builtin_nans etc. with no fallback for compilers
not claiming to be GCC 3.3 or later.

Tested for x86_64.

	* math/math.h: Do not include bits/huge_val.h, bits/huge_valf.h,
	bits/huge_vall.h or bits/huge_val_flt128.h.
	(HUGE_VAL): Define directly here.
	[__USE_ISOC99] (HUGE_VALF): Likewise.
	[__USE_ISOC99] (HUGE_VALL): Likewise.
	[__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
	(HUGE_VAL_F128): Likewise.
	* math/Makefile (headers): Remove bits/huge_val.h,
	bits/huge_valf.h, bits/huge_vall.h and bits/huge_val_flt128.h.
	* bits/huge_val.h: Remove.
	* bits/huge_val_flt128.h: Likewise.
	* bits/huge_valf.h: Likewise.
	* bits/huge_vall.h: Likewise.
	* sysdeps/ia64/bits/huge_vall.h: Likewise.
	* sysdeps/ieee754/bits/huge_val.h: Likewise.
	* sysdeps/ieee754/bits/huge_valf.h: Likewise.
	* sysdeps/m68k/m680x0/bits/huge_vall.h: Likewise.
	* sysdeps/sh/bits/huge_val.h: Likewise.
	* sysdeps/sparc/bits/huge_vall.h: Likewise.
	* sysdeps/x86/bits/huge_vall.h: Likewise.
 2017-08-31 15:50:50 +00:00
Joseph Myers
a48c0fb4b4 Simplify math-svid-compat code. 
Now there are no more assembly wrappers using _LIB_VERSION or
__kernel_standard, the math-svid-compat code can be slighly
simplified.  math-svid-compat.h no longer needs __ASSEMBLER__
conditionals, and the _LIB_VERSION variable no longer needs to be
built for static libm, since all references are now in C code that
includes math-svid-compat.h and so gets the macro definition of
_LIB_VERSION to _POSIX_ outside the compat case.  This patch makes
those cleanups.

Tested for x86_64, and with build-many-glibcs.py.

	* math/math-svid-compat.h [!__ASSEMBLER__]: Make code
	unconditional.
	* sysdeps/ieee754/s_lib_version.c [!defined SHARED]: Remove
	conditional code; define contents only for [LIBM_SVID_COMPAT].
 2017-08-28 15:19:52 +00:00
Szabolcs Nagy
8aa48656bb Fix CFLAGS override in sysdeps/ieee754/dbl-64 
Use += instead of = to avoid overriding target specific CFLAGS settings.
Ideally the settings in target Makefiles would have precedence, but the
Makefile inclusion order does not allow that, with this fix at least the
target settings are not dropped.
 2017-08-24 15:56:11 +01:00
Joseph Myers
ea99fcd038 Fix GCC 7 build of k_standard.c. 
This patch adds a default case to k_standard.c that calls
__builtin_unreachable, to avoid an uninitialized variable error from
GCC 7 (reported in
<https://sourceware.org/ml/libc-alpha/2017-08/msg01012.html>).

Tested for x86_64 (with GCC 7).

	* sysdeps/ieee754/k_standard.c (__kernel_standard): Add default
	case calling __builtin_unreachable.
 2017-08-21 21:43:32 +00:00
Joseph Myers
813378e9fe Obsolete matherr, _LIB_VERSION, libieee.a. 
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling.  matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking.  The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.

The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).

Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used.  If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).

I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).

Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128.  This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly.  Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.

I intend to move to the new wrappers for static libm and new ports in
followup patches.  I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed.  GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed).  Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for.  But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.

Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).

As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.

Tested for x86_64 and x86, and with build-many-glibcs.py.

	* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
	[__USE_MISC] (_LIB_VERSION): Likewise.
	[__USE_MISC] (struct exception): Likewise.
	[__USE_MISC] (matherr): Likewise.
	[__USE_MISC] (DOMAIN): Likewise.
	[__USE_MISC] (SING): Likewise.
	[__USE_MISC] (OVERFLOW): Likewise.
	[__USE_MISC] (UNDERFLOW): Likewise.
	[__USE_MISC] (TLOSS): Likewise.
	[__USE_MISC] (PLOSS): Likewise.
	[__USE_MISC] (HUGE): Likewise.
	[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
	* math/math-svid-compat.h: New file.
	* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
	and matherrl.
	* include/math.h [!_ISOMAC] (__matherr): Remove.
	* manual/arith.texi (FP Exceptions): Do not document matherr.
	* math/Makefile (tests): Change test-matherr to test-matherr-3.
	(tests-internal): New variable.
	(install-lib): Do not add libieee.a.
	(non-lib.a): Likewise.
	(extra-objs): Do not add libieee.a and ieee-math.o.
	(CPPFLAGS-s_lib_version.c): Remove variable.
	($(objpfx)libieee.a): Remove rule.
	($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
	* math/ieee-math.c: Remove.
	* math/libm-test-support.c (matherr): Remove.
	* math/test-matherr.c: Use <support/test-driver.c>.  Add copyright
	and license notices.  Include <math-svid-compat.h> and
	<shlib-compat.h>.
	(matherr): Undefine as macro.  Use compat_symbol_reference.
	(_LIB_VERSION): Likewise.
	* math/test-matherr-2.c: New file.
	* math/test-matherr-3.c: Likewise.
	* sysdeps/generic/math_private.h (__kernel_standard): Remove
	declaration.
	(__kernel_standard_f): Likewise.
	(__kernel_standard_l): Likewise.
	* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
	<math_private.h>.  Include <math-svid-compat.h>.
	(_LIB_VERSION): Undefine as macro.
	(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_.  Define
	only if [LIBM_SVID_COMPAT || !defined SHARED].  If
	[LIBM_SVID_COMPAT], use compat_symbol.
	* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
	<math_private.h>.  Include <math-svid-compat.h>.
	(matherr): Undefine as macro.
	(__matherr): Define only if [LIBM_SVID_COMPAT].  Use
	compat_symbol.
	* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
	[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
	compat_symbol_reference.
	[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
	[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
	[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
	* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
	(MATHERR_D): Remove declaration.
	[!_LIBC] (_LIB_VERSION_TYPE): Likewise
	[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
	[LIBM_BUILD] (pmatherrf): Likewise.
	[LIBM_BUILD] (pmatherr): Likewise.
	[LIBM_BUILD] (pmatherrl): Likewise.
	(DOMAIN): Likewise.
	(SING): Likewise.
	(OVERFLOW): Likewise.
	(UNDERFLOW): Likewise.
	(TLOSS): Likewise.
	(PLOSS): Likewise.
	* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
	(__matherrf): Define only if [LIBM_SVID_COMPAT].  Use
	compat_symbol.
	* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
	(__matherrl): Define only if [LIBM_SVID_COMPAT].  Use
	compat_symbol.
	* math/lgamma-compat.h: Include <math-svid-compat.h>.
	* math/w_acos_compat.c: Likewise.
	* math/w_acosf_compat.c: Likewise.
	* math/w_acosh_compat.c: Likewise.
	* math/w_acoshf_compat.c: Likewise.
	* math/w_acoshl_compat.c: Likewise.
	* math/w_acosl_compat.c: Likewise.
	* math/w_asin_compat.c: Likewise.
	* math/w_asinf_compat.c: Likewise.
	* math/w_asinl_compat.c: Likewise.
	* math/w_atan2_compat.c: Likewise.
	* math/w_atan2f_compat.c: Likewise.
	* math/w_atan2l_compat.c: Likewise.
	* math/w_atanh_compat.c: Likewise.
	* math/w_atanhf_compat.c: Likewise.
	* math/w_atanhl_compat.c: Likewise.
	* math/w_cosh_compat.c: Likewise.
	* math/w_coshf_compat.c: Likewise.
	* math/w_coshl_compat.c: Likewise.
	* math/w_exp10_compat.c: Likewise.
	* math/w_exp10f_compat.c: Likewise.
	* math/w_exp10l_compat.c: Likewise.
	* math/w_exp2_compat.c: Likewise.
	* math/w_exp2f_compat.c: Likewise.
	* math/w_exp2l_compat.c: Likewise.
	* math/w_fmod_compat.c: Likewise.
	* math/w_fmodf_compat.c: Likewise.
	* math/w_fmodl_compat.c: Likewise.
	* math/w_hypot_compat.c: Likewise.
	* math/w_hypotf_compat.c: Likewise.
	* math/w_hypotl_compat.c: Likewise.
	* math/w_j0_compat.c: Likewise.
	* math/w_j0f_compat.c: Likewise.
	* math/w_j0l_compat.c: Likewise.
	* math/w_j1_compat.c: Likewise.
	* math/w_j1f_compat.c: Likewise.
	* math/w_j1l_compat.c: Likewise.
	* math/w_jn_compat.c: Likewise.
	* math/w_jnf_compat.c: Likewise.
	* math/w_jnl_compat.c: Likewise.
	* math/w_lgamma_main.c: Likewise.
	* math/w_lgamma_r_compat.c: Likewise.
	* math/w_lgammaf_main.c: Likewise.
	* math/w_lgammaf_r_compat.c: Likewise.
	* math/w_lgammal_main.c: Likewise.
	* math/w_lgammal_r_compat.c: Likewise.
	* math/w_log10_compat.c: Likewise.
	* math/w_log10f_compat.c: Likewise.
	* math/w_log10l_compat.c: Likewise.
	* math/w_log2_compat.c: Likewise.
	* math/w_log2f_compat.c: Likewise.
	* math/w_log2l_compat.c: Likewise.
	* math/w_log_compat.c: Likewise.
	* math/w_logf_compat.c: Likewise.
	* math/w_logl_compat.c: Likewise.
	* math/w_pow_compat.c: Likewise.
	* math/w_powf_compat.c: Likewise.
	* math/w_powl_compat.c: Likewise.
	* math/w_remainder_compat.c: Likewise.
	* math/w_remainderf_compat.c: Likewise.
	* math/w_remainderl_compat.c: Likewise.
	* math/w_scalb_compat.c: Likewise.
	* math/w_scalbf_compat.c: Likewise.
	* math/w_scalbl_compat.c: Likewise.
	* math/w_sinh_compat.c: Likewise.
	* math/w_sinhf_compat.c: Likewise.
	* math/w_sinhl_compat.c: Likewise.
	* math/w_sqrt_compat.c: Likewise.
	* math/w_sqrtf_compat.c: Likewise.
	* math/w_sqrtl_compat.c: Likewise.
	* math/w_tgamma_compat.c: Likewise.
	* math/w_tgammaf_compat.c: Likewise.
	* math/w_tgammal_compat.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
	* sysdeps/ieee754/k_standard.c: Likewise.
	* sysdeps/ieee754/k_standardf.c: Likewise.
	* sysdeps/ieee754/k_standardl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
	Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
	Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
 2017-08-21 17:45:10 +00:00
Joseph Myers
24ab7723b8 Consistently use uintN_t not u_intN_t in libm. 
This patch changes libm code to make consistent use of C99 uintN_t
types instead of sometimes using those and sometimes using the older
nonstandard u_intN_t names.  This makes sense as a cleanup in its own
right, and also facilitates merges to GCC's libquadmath (which gets
the types from stdint.h and so may not have u_intN_t available at
all).

Tested for x86_64, and with build-many-glibcs.py.

	* math/s_nextafter.c (__nextafter): Use uintN_t instead of
	u_intN_t.
	* math/s_nexttowardf.c (__nexttowardf): Likewise.
	* sysdeps/generic/math_private.h (ieee_double_shape_type):
	Likewise.
	(ieee_float_shape_type): Likewise.
	* sysdeps/i386/fpu/s_fpclassifyl.c (__fpclassifyl): Likewise.
	* sysdeps/i386/fpu/s_isnanl.c (__isnanl): Likewise.
	* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
	* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
	* sysdeps/ieee754/dbl-64/e_acosh.c (__ieee754_acosh): Likewise.
	* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Likewise.
	* sysdeps/ieee754/dbl-64/e_fmod.c (__ieee754_fmod): Likewise.
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Likewise.
	* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
	(__ieee754_yn): Likewise.
	* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise.
	* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
	* sysdeps/ieee754/dbl-64/e_rem_pio2.c (__ieee754_rem_pio2):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise.
	* sysdeps/ieee754/dbl-64/s_ceil.c (__ceil): Likewise.
	* sysdeps/ieee754/dbl-64/s_copysign.c (__copysign): Likewise.
	* sysdeps/ieee754/dbl-64/s_erf.c (__erf): Likewise.
	(__erfc): Likewise.
	* sysdeps/ieee754/dbl-64/s_expm1.c (__expm1): Likewise.
	* sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Likewise.
	* sysdeps/ieee754/dbl-64/s_floor.c (__floor): Likewise.
	* sysdeps/ieee754/dbl-64/s_fpclassify.c (__fpclassify): Likewise.
	* sysdeps/ieee754/dbl-64/s_isnan.c (__isnan): Likewise.
	* sysdeps/ieee754/dbl-64/s_issignaling.c (__issignaling):
	Likewise.
	* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise.
	* sysdeps/ieee754/dbl-64/s_llround.c (__llround): Likewise.
	* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
	* sysdeps/ieee754/dbl-64/s_lround.c (__lround): Likewise.
	* sysdeps/ieee754/dbl-64/s_modf.c (__modf): Likewise.
	* sysdeps/ieee754/dbl-64/s_nextup.c (__nextup): Likewise.
	* sysdeps/ieee754/dbl-64/s_remquo.c (__remquo): Likewise.
	* sysdeps/ieee754/dbl-64/s_round.c (__round): Likewise.
	* sysdeps/ieee754/dbl-64/s_trunc.c (__trunc): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c
	(__issignaling): Likewise.
	* sysdeps/ieee754/flt-32/e_atan2f.c (__ieee754_atan2f): Likewise.
	* sysdeps/ieee754/flt-32/e_fmodf.c (__ieee754_fmodf): Likewise.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
	Likewise.
	* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise.
	* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Likewise.
	* sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f):
	Likewise.
	* sysdeps/ieee754/flt-32/e_remainderf.c (__ieee754_remainderf):
	Likewise.
	* sysdeps/ieee754/flt-32/e_sqrtf.c (__ieee754_sqrtf): Likewise.
	* sysdeps/ieee754/flt-32/s_ceilf.c (__ceilf): Likewise.
	* sysdeps/ieee754/flt-32/s_copysignf.c (__copysignf): Likewise.
	* sysdeps/ieee754/flt-32/s_erff.c (__erff): Likewise.
	(__erfcf): Likewise.
	* sysdeps/ieee754/flt-32/s_expm1f.c (__expm1f): Likewise.
	* sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise.
	* sysdeps/ieee754/flt-32/s_floorf.c (__floorf): Likewise.
	* sysdeps/ieee754/flt-32/s_fpclassifyf.c (__fpclassifyf):
	Likewise.
	* sysdeps/ieee754/flt-32/s_isnanf.c (__isnanf): Likewise.
	* sysdeps/ieee754/flt-32/s_issignalingf.c (__issignalingf):
	Likewise.
	* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
	* sysdeps/ieee754/flt-32/s_llroundf.c (__llroundf): Likewise.
	* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
	* sysdeps/ieee754/flt-32/s_lroundf.c (__lroundf): Likewise.
	* sysdeps/ieee754/flt-32/s_modff.c (__modff): Likewise.
	* sysdeps/ieee754/flt-32/s_remquof.c (__remquof): Likewise.
	* sysdeps/ieee754/flt-32/s_roundf.c (__roundf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_acoshl.c (__ieee754_acoshl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_atan2l.c (__ieee754_atan2l):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_atanhl.c (__ieee754_atanhl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_fmodl.c (__ieee754_fmodl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
	(__ieee754_ynl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128/e_rem_pio2l.c (__ieee754_rem_pio2l):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_remainderl.c (__ieee754_remainderl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_sinhl.c (__ieee754_sinhl): Likewise.
	* sysdeps/ieee754/ldbl-128/k_cosl.c (__kernel_cosl): Likewise.
	* sysdeps/ieee754/ldbl-128/k_sincosl.c (__kernel_sincosl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_ceill.c (__ceill): Likewise.
	* sysdeps/ieee754/ldbl-128/s_copysignl.c (__copysignl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_erfl.c (__erfcl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_fabsl.c (__fabsl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise.
	* sysdeps/ieee754/ldbl-128/s_floorl.c (__floorl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_fpclassifyl.c (__fpclassifyl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_isnanl.c (__isnanl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_issignalingl.c (__issignalingl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_modfl.c (__modfl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nextupl.c (__nextupl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-128/s_rintl.c (__rintl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_roundl.c (__roundl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_tanhl.c (__tanhl): Likewise.
	* sysdeps/ieee754/ldbl-128/s_truncl.c (__truncl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c (__ieee754_rem_pio2l):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
	(__ieee754_remainderl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_cosl.c (__kernel_cosl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/k_sinl.c (__kernel_sinl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c (__fabsl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c (___fpclassifyl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_modfl.c (__modfl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-96/e_acoshl.c (__ieee754_acoshl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_asinl.c (__ieee754_asinl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_atanhl.c (__ieee754_atanhl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j0l.c (__ieee754_j0l): Likewise.
	(__ieee754_y0l): Likewise.
	(pzero): Likewise.
	(qzero): Likewise.
	* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
	(__ieee754_y1l): Likewise.
	(pone): Likewise.
	(qone): Likewise.
	* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
	(__ieee754_ynl): Likewise.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise.
	(__ieee754_lgammal_r): Likewise.
	* sysdeps/ieee754/ldbl-96/e_rem_pio2l.c (__ieee754_rem_pio2l):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_sinhl.c (__ieee754_sinhl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_copysignl.c (__copysignl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_erfl.c (__erfl): Likewise.
	(__erfcl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_issignalingl.c (__issignalingl):
	Likewise.
	* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_modfl.c (__modfl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-96/s_nextupl.c (__nextupl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Likewise.
	* sysdeps/ieee754/ldbl-96/s_roundl.c (__roundl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_tanhl.c (__tanhl): Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
	Likewise.
	* sysdeps/m68k/m680x0/fpu/e_pow.c (s(__ieee754_pow)): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_fpclassifyl.c (__fpclassifyl):
	Likewise.
	* sysdeps/m68k/m680x0/fpu/s_llrint.c (__llrint): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_llrintf.c (__llrintf): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_llrintl.c (__llrintl): Likewise.
	* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
	* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise.
 2017-08-03 19:55:04 +00:00
Steve Ellcey
a4c9be1b8b Fix cexpl when compiled with latest GCC 
* sysdeps/ieee754/ldbl-128/e_expl.c (__ieee754_expl): Call
	math_force_eval.
 2017-07-21 09:47:57 -07:00
Gabriel F. T. Gomes
8466ee1cb7 float128: Add signbit alternative for old compilers 
In math/math.h, __MATH_TG will expand signbit to __builtin_signbit*,
e.g.: __builtin_signbitf128, before GCC 6.  However, there has never
been a __builtin_signbitf128 in GCC and the type-generic builtin is
only available since GCC 6.  For older GCC, this patch defines
__builtin_signbitf128 to __signbitf128, so that the internal function
is used instead of the non-existent builtin.

This patch also changes the implementation of __signbitf128, because
it was reusing the implementation of __signbitl from ldbl-128, which
calls __builtin_signbitl.  Using the long double version of the
builtin is not correct on machines where _Float128 is ABI-distinct
from long double (i.e.: ia64, powerpc64le, x86, x86_84).  The new
implementation does not rely on builtins when being built with GCC
versions older than 6.0.

The new code does not currently affect powerpc64le builds, because
only GCC 6.2 fulfills the requirements from configure.  It might
affect powerpc64le builds if those requirements are backported to
older versions of the compiler.  The new code affects x86_64 builds,
since glibc is supposed to build correctly with older versions of GCC.

Tested for powerpc64le and x86_64.

	* include/math.h (__signbitf128): Define as hidden.
	* sysdeps/ieee754/float128/s_signbitf128.c (__signbitf128):
	Reimplement without builtins.
	* sysdeps/ia64/bits/floatn.h [!__GNUC_PREREQ (6, 0)]
	(__builtin_signbitf128): Define to __signbitf128.
	* sysdeps/powerpc/bits/floatn.h: Likewise.
	* sysdeps/x86/bits/floatn.h: Likewise.
 2017-06-30 18:34:29 -03:00
Gabriel F. T. Gomes
7fa1d9462b Add libio-mtsafe flags to the build of strfromf128 
Similar to the other functions in the strfrom class, strfromf128 calls
__printf_fp in order to convert the floating-point value to characters.
This requires the value of IO_MTSAFE_IO.

Tested for powerpc64le and s390x.

	* sysdeps/ieee754/float128/Makefile (CFLAGS-strfromf128.c): Add
	$(libio-mtsafe) to get the value of IO_MTSAFE_IO.
 2017-06-23 10:31:49 -03:00
Paul Clarke
c340290de8 Optimized version of powf() 
Most significant changes are code simplification and use of doubles for
intermediate values.  Also, some rearrangement to move early
non-dependent code later, out of the faster paths.

	* sysdeps/ieee754/flt-32/e_powf.c: Optimized implementation utilizing
	rearranged code and doubles float types.
 2017-06-23 09:19:17 -03:00
Joseph Myers
c271ff9469 Support _Float128 in ldbl-96 bits/iscanonical.h. 
This patch adds _Float128 support to the ldbl-96 bits/iscanonical.h,
as needed for x86_64 / x86 / ia64 support of _Float128.

Tested for x86_64 (in conjunction with float128 patches).

	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h
	[__HAVE_DISTINCT_FLOAT128] (__iscanonicalf128): New macro.
 2017-06-22 23:06:41 +00:00
Joseph Myers
f20079d219 Fix float128_private.h redefinition of SET_RESTORE_ROUNDL. 
As with other long double identifiers, float128_private.h has a
redefinition of SET_RESTORE_ROUNDL.  However, that redefinition is
broken, since this is a macro with one argument being defined to take
no arguments.  This patch fixes the redefinition.  (x86_64 needs the
redefinition because SET_RESTORE_ROUNDL only changes the x87 rounding
mode, whereas _Float128 arithmetic uses the SSE rounding mode instead
on x86_64.)

Tested for x86_64 (in conjunction with float128 patches).

	* sysdeps/ieee754/float128/float128_private.h
	[SET_RESTORE_ROUNDF128] (SET_RESTORE_ROUNDL): Take an argument and
	pass it to SET_RESTORE_ROUNDF128.
 2017-06-22 22:57:28 +00:00
Joseph Myers
db7a548d02 Make float128_private.h work with generic ieee754.h. 
float128_private.h redefines ieee754.h identifiers ieee854_long_double
and IEEE854_LONG_DOUBLE_BIAS to map them to identifiers from
ieee754_float128.h.

This causes problems when ieee754.h is included after
float128_private.h and it's a version of ieee754.h that also defines
those identifiers; specifically, sysdeps/ieee754/ieee754.h, which
defines those identifiers for the x86 extended format.  This patch
fixes this by ensuring an include of ieee754.h from float128_private.h
before the redefinitions.

Tested for x86_64 (in conjunction with float128 patches).

	* sysdeps/ieee754/float128/float128_private.h: Include
	<ieee754.h>.
 2017-06-22 22:53:01 +00:00
Joseph Myers
33711da4e9 Fix float128 uses of xlocale.h. 
Three float128 files still include xlocale.h after it was removed.  I
don't know why this didn't cause problems for powerpc64le float128
testing; it did cause problems for my x86_64 float128 testing.  This
patch changes the includes to use bits/types/locale_t.h.

Tested for x86_64 (in conjunction with float128 patches).

	* sysdeps/ieee754/float128/strtof128_l.c: Include
	<bits/types/locale_t.h> instead of <xlocale.h>.
	* sysdeps/ieee754/float128/wcstof128.c: Likewise.
	* sysdeps/ieee754/float128/wcstof128_l.c: Likewise.
 2017-06-22 22:34:49 +00:00
Zack Weinberg
af85385f31 Use locale_t, not __locale_t, throughout glibc 
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t.  Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.

	* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
	* include/monetary.h, include/stdlib.h, include/time.h
	* include/wchar.h, locale/duplocale.c, locale/freelocale.c
	* locale/global-locale.c, locale/langinfo.h, locale/locale.h
	* locale/localeinfo.h, locale/newlocale.c
	* locale/nl_langinfo_l.c, locale/uselocale.c
	* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
	* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
	* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
	* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
	* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
	* string/strcasecmp.c, string/strcoll_l.c, string/string.h
	* string/strings.h, string/strncase.c, string/strxfrm_l.c
	* sysdeps/ieee754/float128/strtof128_l.c
	* sysdeps/ieee754/float128/wcstof128.c
	* sysdeps/ieee754/float128/wcstof128_l.c
	* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
	* sysdeps/ieee754/ldbl-64-128/strtold_l.c
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
	* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
	* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
	* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
	* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
	* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
	* sysdeps/x86_64/strcasecmp_l-nonascii.c
	* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
	* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
	* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
	* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
	* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
	* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
	* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
	* wctype/towctrans_l.c, wctype/wcfuncs_l.c
	* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
	Change all uses of __locale_t to locale_t.
 2017-06-20 20:30:06 -04:00
Zack Weinberg
f0be25b633 Rename xlocale.h to bits/types/__locale_t.h. 
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t.  This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two.  None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.

There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence.  It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.

I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard.  There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.

        * locale/xlocale.h: Rename to...
	* locale/bits/types/__locale_t.h: ...here.  Adjust commentary.
	Only define struct __locale_struct and __locale_t, not locale_t.
        * locale/bits/types/locale_t.h: New file; define locale_t here.
        * locale/Makefile (headers): Update to match.

        * include/xlocale.h: Delete wrapper.
        * include/bits/types/__locale_t.h: New wrapper.
        * include/bits/types/locale_t.h: New wrapper.

        * ctype/ctype.h, include/printf.h, include/time.h
        * locale/langinfo.h, locale/locale.h, stdlib/monetary.h
        * stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
        * wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
        Correct outdated comments regarding the standardization status of
        the functions that take locale_t arguments.

        * stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
        * stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
        * sysdeps/ieee754/ldbl-128ibm/strtold_l.c
        * sysdeps/ieee754/ldbl-64-128/strtold_l.c
        * wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
        * wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
        Don't include xlocale.h. If necessary, include locale.h instead.

        * stdlib/strtold_l.c: Unconditionally include wchar.h.
 2017-06-20 20:28:11 -04:00
Paul E. Murphy
45f39d4588 float128: Add strtof128, wcstof128, and related functions. 
The implementations are contained with sysdeps/ieee754/float128 as
they are only built when _Float128 is enabled within libc/m.

	* include/gmp.h (__mpn_construct_float128): New declaration.
	* include/stdlib.h: Include bits/floatn.h for _Float128 tests.
	(__strtof128_l): New declaration.
	(__strtof128_nan): Likewise.
	(__wcstof128_nan): Likewise.
	(__strtof128_internal): Likewise.
	(____strtof128_l_internal): Likewise.
	* include/wchar.h: Include bits/floatn.h for _Float128 tests.
	(__wcstof128_l): New declaration.
	(__wcstof128_internal): Likewise.

	* stdlib/Makefile (bug-strtod2): Link libm too.

	* stdlib/stdlib.h (strtof128): New declaration.
	(strtof128_l): Likewise.

	* stdlib/tst-strtod-nan-locale-main.c: Updated to use
	tst-strtod.h macros to ensure float128 gets tested too.

	* stdlib/tst-strtod-round-skeleton.c (CHOOSE_f128): New macro.

	* stdlib/tst-strtod.h: Include bits/floatn.h for _Float128
	tests.
	(IF_FLOAT128): New macro.
	(GEN_TEST_STRTOD): Update to optionally include _Float128 in
	the tests.
	(STRTOD_TEST_FOREACH): Likewise.

	* sysdeps/ieee754/float128/Makefile: Insert new strtof128 and
	wcstof128 functions into libc.

	* sysdeps/ieee754/float128/Versions: Add exports for the above
	new functions.

	* sysdeps/ieee754/float128/mpn2float128.c: New file.
	* sysdeps/ieee754/float128/strtod_nan_float128.h: New file.
	* sysdeps/ieee754/float128/strtof128.c: New file.
	* sysdeps/ieee754/float128/strtof128_l.c: New file.
	* sysdeps/ieee754/float128/strtof128_nan.c: New file.
	* sysdeps/ieee754/float128/wcstof128.c: New file.
	* sysdeps/ieee754/float128/wcstof128_l.c: New file.
	* sysdeps/ieee754/float128/wcstof128_nan.c: New fike.
	* wcsmbs/Makefile: (CFLAGS-wcstof128.c): Append strtox-CFLAGS.
	(CFLAGS-wcstof128_l): Likewise.

	* wcsmbs/wchar.h: Include bits/floatn.h for _Float128 tests.
	(wcstof128): New declaration.
	(wcstof128_l): Likewise.
 2017-06-12 14:48:53 -03:00
Gabriel F. T. Gomes
cf2046ec7d float128: Add strfromf128 
Add strfromf128 to stdlib when _Float128 support is enabled.

	* stdio-common/printf-parsemb.c (__parse_one_specmb): Initialize
	spec->info.is_binary128 to zero.
	* stdio-common/printf.h (printf_info): Add new member is_binary128
	to indicate that the number being converted to string is compatible
	with the IEC 60559 binary128 format.
	* stdio-common/printf_fp.c (__printf_fp_l): Add code to deal with
	_Float128 numbers.
	* stdio-common/printf_fphex.c: Include ieee754_float128.h and
	ldbl-128/printf_fphex_macros.h
	(__printf_fphex): Add code to deal with _Float128 numbers.
	* stdio-common/printf_size.c (__printf_size): Likewise.
	* stdio-common/vfprintf.c (process_arg): Initialize member
	info.is_binary128 to zero.
	* stdlib/fpioconst.h (FLT128_MAX_10_EXP_LOG): New macro.
	* stdlib/stdlib.h: Include bits/floatn.h for _Float128 support.
	(strfromf128): New declaration.
	* stdlib/strfrom-skeleton.c (STRFROM): Set member info.is_binary128
	to one.
	* sysdeps/ieee754/float128/Makefile: Add strfromf128.
	* sysdeps/ieee754/float128/Versions: Likewise.
	* sysdeps/ieee754/float128/strfromf128.c: New file.
 2017-06-07 17:08:21 -03:00
Gabriel F. T. Gomes
2bc646c9e9 Refactor PRINT_FPHEX_LONG_DOUBLE into a reusable macro 
This patch refactors the macro PRINT_FPHEX_LONG_DOUBLE from the file
sysdeps/ieee754/ldbl-128/printf_fphex.c into a function-like macro to
enable its use for both long double and _Float128, when they are
ABI-distinct.

	* sysdeps/ieee754/ldbl-128/printf_fphex.c: Include
	ldbl-128/printf_fphex_macros.h for the definition of PRINT_FPHEX.
	(PRINT_FPHEX_LONG_DOUBLE): Define based on PRINT_FPHEX.
	* sysdeps/ieee754/ldbl-128/printf_fphex_macros.h
	(PRINT_FPHEX): New function-like macro that can be used for long
	double, as well as for _Float128
 2017-06-07 17:06:31 -03:00
Gabriel F. T. Gomes
32bf1d09da float128: Add conversion from float128 to mpn 
Reuse the code for __mpn_extract_long_double to implement
__mpn_extract_float128.

	* include/gmp.h: Include bits/floatn.h
	(__mpn_extract_float128): Declare when __HAVE_DISTINCT_FLOAT128 is 1.
	* stdlib/gmp-impl.h: Also check if alloca is not defined before
	including stack-alloc.h.  It could have been defined by other header
	which not necessarily defines HAVE_ALLOCA.
	* sysdeps/ieee754/float128/Makefile: New file.
	* sysdeps/ieee754/float128/float1282mpn.c: New file.
	* sysdeps/ieee754/float128/float128_private.h: Include gmp.h before
	redefining __mpn_extract_long_double to __mpn_extract_float128, then
	redefine __mpn_extract_long_double to __mpn_extract_float128.
	* sysdeps/ieee754/ldbl-128/ldbl2mpn.c: Replace long double with
	_Float128 to allow float128_private.h overrides.
 2017-06-07 17:03:43 -03:00
Paul E. Murphy
302bb1a3c3 float128: Add wrappers to override ldbl-128 as float128. 
This change defines float128_private.h which contains
macros used to override long double naming conventions
when building a ldbl file.

	* math/math.h [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
	(SNANF128): New macro.
	* math/e_sqrtf128.c: New file.
	* math/s_fmaxmag_template.c: Include math_private.h in order to
	make inline expansion of fabs128().
	* math/s_fminmag_template.c: Likewise.

	* sysdeps/ieee754/float128/e_acosf128.c: New file.
	* sysdeps/ieee754/float128/e_acoshf128.c: New file.
	* sysdeps/ieee754/float128/e_asinf128.c: New file.
	* sysdeps/ieee754/float128/e_atan2f128.c: New file.
	* sysdeps/ieee754/float128/e_atanhf128.c: New file.
	* sysdeps/ieee754/float128/e_coshf128.c: New file.
	* sysdeps/ieee754/float128/e_exp10f128.c: New file.
	* sysdeps/ieee754/float128/e_expf128.c: New file.
	* sysdeps/ieee754/float128/e_fmodf128.c: New file.
	* sysdeps/ieee754/float128/e_gammaf128_r.c: New file.
	* sysdeps/ieee754/float128/e_hypotf128.c: New file.
	* sysdeps/ieee754/float128/e_ilogbf128.c: New file.
	* sysdeps/ieee754/float128/e_j0f128.c: New file.
	* sysdeps/ieee754/float128/e_j1f128.c: New file.
	* sysdeps/ieee754/float128/e_jnf128.c: New file.
	* sysdeps/ieee754/float128/e_lgammaf128_r.c: New file.
	* sysdeps/ieee754/float128/e_log10f128.c: New file.
	* sysdeps/ieee754/float128/e_log2f128.c: New file.
	* sysdeps/ieee754/float128/e_logf128.c: New file.
	* sysdeps/ieee754/float128/e_powf128.c: New file.
	* sysdeps/ieee754/float128/e_rem_pio2f128.c: New file.
	* sysdeps/ieee754/float128/e_remainderf128.c: New file.
	* sysdeps/ieee754/float128/e_scalbf128.c: New file.
	* sysdeps/ieee754/float128/e_sinhf128.c: New file.
	* sysdeps/ieee754/float128/float128_private.h: New file.
	* sysdeps/ieee754/float128/gamma_productf128.c: New file.
	* sysdeps/ieee754/float128/ieee754_float128.h: New file.
	* sysdeps/ieee754/float128/k_cosf128.c: New file.
	* sysdeps/ieee754/float128/k_sincosf128.c: New file.
	* sysdeps/ieee754/float128/k_sinf128.c: New file.
	* sysdeps/ieee754/float128/k_tanf128.c: New file.
	* sysdeps/ieee754/float128/lgamma_negf128.c: New file.
	* sysdeps/ieee754/float128/lgamma_productf128.c: New file.
	* sysdeps/ieee754/float128/s_asinhf128.c: New file.
	* sysdeps/ieee754/float128/s_atanf128.c: New file.
	* sysdeps/ieee754/float128/s_cbrtf128.c: New file.
	* sysdeps/ieee754/float128/s_ceilf128.c: New file.
	* sysdeps/ieee754/float128/s_copysignf128.c: New file.
	* sysdeps/ieee754/float128/s_cosf128.c: New file.
	* sysdeps/ieee754/float128/s_erff128.c: New file.
	* sysdeps/ieee754/float128/s_expm1f128.c: New file.
	* sysdeps/ieee754/float128/s_fabsf128.c: New file.
	* sysdeps/ieee754/float128/s_finitef128.c: New file.
	* sysdeps/ieee754/float128/s_floorf128.c: New file.
	* sysdeps/ieee754/float128/s_fmaf128.c: New file.
	* sysdeps/ieee754/float128/s_fpclassifyf128.c: New file.
	* sysdeps/ieee754/float128/s_frexpf128.c: New file.
	* sysdeps/ieee754/float128/s_fromfpf128.c: New file.
	* sysdeps/ieee754/float128/s_fromfpxf128.c: New file.
	* sysdeps/ieee754/float128/s_getpayloadf128.c: New file.
	* sysdeps/ieee754/float128/s_isinff128.c: New file.
	* sysdeps/ieee754/float128/s_isnanf128.c: New file.
	* sysdeps/ieee754/float128/s_issignalingf128.c: New file.
	* sysdeps/ieee754/float128/s_llrintf128.c: New file.
	* sysdeps/ieee754/float128/s_llroundf128.c: New file.
	* sysdeps/ieee754/float128/s_log1pf128.c: New file.
	* sysdeps/ieee754/float128/s_logbf128.c: New file.
	* sysdeps/ieee754/float128/s_lrintf128.c: New file.
	* sysdeps/ieee754/float128/s_lroundf128.c: New file.
	* sysdeps/ieee754/float128/s_modff128.c: New file.
	* sysdeps/ieee754/float128/s_nearbyintf128.c: New file.
	* sysdeps/ieee754/float128/s_nextafterf128.c: New file.
	* sysdeps/ieee754/float128/s_nexttowardf128.c: New file.
	* sysdeps/ieee754/float128/s_nextupf128.c: New file.
	* sysdeps/ieee754/float128/s_remquof128.c: New file.
	* sysdeps/ieee754/float128/s_rintf128.c: New file.
	* sysdeps/ieee754/float128/s_roundevenf128.c: New file.
	* sysdeps/ieee754/float128/s_roundf128.c: New file.
	* sysdeps/ieee754/float128/s_scalblnf128.c: New file.
	* sysdeps/ieee754/float128/s_scalbnf128.c: New file.
	* sysdeps/ieee754/float128/s_setpayloadf128.c: New file.
	* sysdeps/ieee754/float128/s_setpayloadsigf128.c: New file.
	* sysdeps/ieee754/float128/s_signbitf128.c: New file.
	* sysdeps/ieee754/float128/s_significandf128.c: New file.
	* sysdeps/ieee754/float128/s_sincosf128.c: New file.
	* sysdeps/ieee754/float128/s_sinf128.c: New file.
	* sysdeps/ieee754/float128/s_tanf128.c: New file.
	* sysdeps/ieee754/float128/s_tanhf128.c: New file.
	* sysdeps/ieee754/float128/s_totalorderf128.c: New file.
	* sysdeps/ieee754/float128/s_totalordermagf128.c: New file.
	* sysdeps/ieee754/float128/s_truncf128.c: New file.
	* sysdeps/ieee754/float128/s_ufromfpf128.c: New file.
	* sysdeps/ieee754/float128/s_ufromfpxf128.c: New file.
	* sysdeps/ieee754/float128/t_sincosf128.c: New file.
	* sysdeps/ieee754/float128/x2y2m1f128.c: New file.

	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h:
	(__iscanonicalf128): Define as a macro.
 2017-05-25 09:01:37 -03:00
Joseph Myers
9aa4965cdf Also create and use ldbl-compat-choose.h. 
This patch makes the glibc build generate an additional header
ldbl-compat-choose.h that defines LONG_DOUBLE_COMPAT_CHOOSE_* macros
for each libc and libm symbol, which select one or the other of their
arguments based on whether the symbol was added before a change to
long double != double.

The effect of this is that it is then possible to define a macro
maybe_long_double_symbol that automatically acts as either
long_double_symbol or weak_alias depending on when the symbol being
defined was added.  This can be used when building long double
functions from type-generic templates.  Thus, with this patch ldbl-opt
no longer needs special long double implementations of each new libm
function added using such a template, and the existing such
implementations are removed.

This is a step towards being able more generally to use common macros
to create all the aliases needed for a libm function, so reducing the
amount of special-case code needed in ldbl-opt and ldbl-64-128, and
facilitating subsequently adding *f32 / *f64 / *f128 / *f32x / *f64x
aliases to existing functions (where the set of aliases that a
function should have may depend on the architecture in various ways).

Tested with build-many-glibcs.py.  Except for on
powerpc64le-linux-gnu, installed stripped shared libraries are
unchanged by the patch.  powerpc64le-linux-gnu is the unique
configuration which used ldbl-opt from the start rather than adding a
new long double choice after originally only having had long double =
double.  The effect of the patch there is that various cases that
previously used long_double_symbol unconditionally now use weak_alias
instead, so .os files contain e.g. a symbol cabsl instead of
cabsl@@GLIBC_2.17.  The final dynamic symbols and versions in the
resulting shared libraries are unchanged (ABI tests pass), as is the
disassembly of the shared libraries, but the differences in the .os
files still result in different .gnu_hash contents in libm.so; the
differences are of no significance and logically using weak_alias is
what's most appropriate in those cases.

	* scripts/versions.awk: Generate ldbl-compat-choose.h.
	* sysdeps/ieee754/ldbl-opt/math-type-macros-ldouble.h: Include
	<ldbl-compat-choose.h>.
	(maybe_long_double_symbol): New macro.
	[!declare_mgen_alias] (declare_mgen_alias): Use
	maybe_long_double_symbol.
	* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Remove.
	* sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nextdownl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
	* Makerules [$(build-shared) = yes && !avoid-generated]
	(before-compile): Add $(common-objpfx)ldbl-compat-choose.h.
	[$(build-shared) = yes && !avoid-generated]
	($(common-objpfx)ldbl-compat-choose.h): New target.
 2017-05-19 11:30:26 +00:00
Joseph Myers
8f2e1830f2 Create and use first-versions.h with macros for function symbol versions. 
This patch arranges for the glibc build to generate a header
first-versions.h that defines macros for the earliest symbol version
in which each public symbol (GLIBC_[0-9]* symbol version, name only
uses C identifier characters) is available.

This is used in sysdeps/ieee754/ldbl-opt/math-type-macros-double.h to
replace the manually defined LDOUBLE_*_libm_version macros for various
functions defined using type-generic templates, the purpose of which
is to use in LONG_DOUBLE_COMPAT tests "was this function originally
added before glibc supported long double != double on this platform?".
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-12/msg00246.html>, I expect
this to be useful more generally in reducing the amount of
special-case code needed in ldbl-opt and ldbl-64-128.

Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.

	* scripts/versions.awk: Generate first-versions.h.
	* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h: Include
	<first-versions.h>.
	(LDOUBLE_cabsl_libm_version): Remove macro.
	(LDOUBLE_cargl_libm_version): Likewise.
	(LDOUBLE_cimagl_libm_version): Likewise.
	(LDOUBLE_conjl_libm_version): Likewise.
	(LDOUBLE_creall_libm_version): Likewise.
	(LDOUBLE_cacosl_libm_version): Likewise.
	(LDOUBLE_cacoshl_libm_version): Likewise.
	(LDOUBLE_ccosl_libm_version): Likewise.
	(LDOUBLE_ccoshl_libm_version): Likewise.
	(LDOUBLE_casinl_libm_version): Likewise.
	(LDOUBLE_csinl_libm_version): Likewise.
	(LDOUBLE_casinhl_libm_version): Likewise.
	(LDOUBLE_csinhl_libm_version): Likewise.
	(LDOUBLE_catanl_libm_version): Likewise.
	(LDOUBLE_catanhl_libm_version): Likewise.
	(LDOUBLE_ctanl_libm_version): Likewise.
	(LDOUBLE_ctanhl_libm_version): Likewise.
	(LDOUBLE_cexpl_libm_version): Likewise.
	(LDOUBLE_clogl_libm_version): Likewise.
	(LDOUBLE_cprojl_libm_version): Likewise.
	(LDOUBLE_csqrtl_libm_version): Likewise.
	(LDOUBLE_cpowl_libm_version): Likewise.
	(LDOUBLE_clog10l_libm_version): Likewise.
	(LDOUBLE___clog10l_libm_version): Likewise.
	(LDOUBLE_fdiml_libm_version): Likewise.
	(LDOUBLE_fmaxl_libm_version): Likewise.
	(LDOUBLE_fminl_libm_version): Likewise.
	(LDOUBLE_ilogbl_libm_version): Likewise.
	(LDOUBLE_nanl_libm_version): Likewise.
	[!M_LIBM_NEED_COMPAT] (M_LIBM_NEED_COMPAT): Use
	FIRST_VERSION_libm_* macros.
	[!declare_mgen_libm_compat] (declare_mgen_libm_compat): Likewise.
	* Makerules [$(build-shared) = yes && !avoid-generated]
	(before-compile): Add $(common-objpfx)first-versions.h.
	[$(build-shared) = yes && !avoid-generated]
	($(common-objpfx)first-versions.h): New target.
	($(common-objpfx)sysd-versions): Depend on and change to rule for
	building $(common-objpfx)versions.stmp.
 2017-05-19 11:26:00 +00:00
Paul E. Murphy
81f26b53b5 float128: Add private _Float128 declarations for libm. 
Add the necessary bits to the private headers to support
building the _Float128 libm functions.

A local override for float.h is provided to include the
missing *FLT128 macros implied by TS 18661-3 for this
type when compiling prior to GCC 7.

	* include/complex.h (__kernel_casinhf128): New declaration.
	* include/float.h: New file.
	* include/math.h (__finitef128): Add a hidden def.
	(__isinff128): Likewise.
	(__isnanf128): Likewise.
	(__fpclassify): Likewise.
	(__issignalling): Likewise.
	(__expf128): Likewise.
	(__expm1f128): Likewise.

	* sysdeps/generic/fix-fp-int-convert-overflow.h:
	(FIX_FLT128_LONG_CONVERT_OVERFLOW): New macro.
	(FIX_FLT128_LLONG_CONVERT_OVERFLOW): Likewise.

	* sysdeps/generic/math-type-macros-float128.h: New file.

	* sysdeps/generic/math_private.h: Include bits/floatn.h and
	math_private_calls.h for _Float128.
	(__isinff128): New inline implementation used when GCC < 7.0,
	since in this case __builtin_isinf_sign is broken.
	(fabsf128): New inline implementation that calls the builtin.
	(__EXPR_FLT128): New macro.
	(min_of_type): Optionally include _Float128 types too.

	* sysdeps/generic/math_private_calls.h (__kernel_sincos):
	Declare for _Float128.
	(__kernel_rem_pio2): Likewise.

	* sysdeps/ieee754/ldbl-opt/s_sin.c:
	(__DECL_SIMD_sincos_disablef128): New macro.
 2017-05-15 10:23:28 -03:00
Paul E. Murphy
26265c3bce float128: Add _Float128 make bits to libm. 
This adds the appropriate common bits for a platform to
enable float128 and expose ABI.

	* math/Makefile:
	(type-float128-suffix): New variable
	(type-float128-routines): Likewise
	(type-float128-yes): Likewise
	(types): Append float128 if supported
	(types-basic): New variable to control the use of templates for
	float, double, and long double, but not for float128 or newer types.
	(type-basic-foreach): Likewise.

	* sysdeps/ieee754/float128/Makeconfig: New file.
	* sysdeps/ieee754/float128/Versions: New file.
 2017-05-09 11:40:28 -03:00
Paul E. Murphy
593bf7189a ldbl-128: Use mathx_hidden_def inplace of hidden_def 
This provides a extra macro expansion before invoking
the hidden_def macro.  This is necessary to build the
ldbl-128 files as float128 correctly.

	* sysdeps/generic/math_private.h:
	(mathx_hidden_def): New macro.
	* sysdeps/ieee754/ldbl-128/s_finitel.c: Replace hidden_def with
	the above.
	* sysdeps/ieee754/ldbl-128/s_isinfl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_isnanl.c: Likewise.
 2017-05-04 14:47:27 -03:00
Gabriel F. T. Gomes
6d4adeb700 Remove unneeded declarations from math_private.h 
The declarations of many functions in math_private.h are not required
since __MATHDECL and __MATHDECLX, in math.h, already provide the
declarations for these functions.  This patch removes the declarations
from math_private.h. It also adds the inclusion of math.h to the files
which depended on the declaration of functions in math_private.h.

Tested for powerpc64le and s390x.

	* sysdeps/generic/math_private.h: Remove declarations of
	many functions that are already declared in math.h.
	* sysdeps/ieee754/ldbl-128/e_logl.c: Include math.h to get the
	declaration for __frexpl.
	* sysdeps/ieee754/ldbl-128ibm/e_logl.c: Include math.h to get
	the declarations for __scalbnl and fabsl.
 2017-04-10 12:20:47 -03:00
Joseph Myers
e4e52ff059 Improve float range reduction accuracy near pi/2 (bug 21094). 
Bug 21094 reports 3ulp errors of cosf and tanf for certain arguments
near pi/2 arising from the use of an insufficiently accurate range
reduction.  (To be clear, this is a quality-of-implementation issue
relating to the apparent intent of those particular cosf and tanf
implementations; 3ulp is within the general glibc accuracy goals, so
not inherently a bug.)

This patch fixes that error by making a wider range of cases use the
existing more accurate range reduction for arguments close to pi/2.
The wider range of values is still narrow enough for the "z -=
pio2_2;" in the more accurate case to be exact, as the code expects.

Tested for x86_64, x86 and mips64; no ulps updates needed (but at
least on mips64, the larger ulps were seen if the tests were added
without the substantive fix).

	[BZ #21094]
	* sysdeps/ieee754/flt-32/e_rem_pio2f.c (__ieee754_rem_pio2f): Use
	24+24+24-bit pi for wider range of values around pi/2.
	* math/auto-libm-test-in: Add more tests of cos and tan.
	* math/auto-libm-test-out-cos: Regenerated.
	* math/auto-libm-test-out-tan: Likewise.
 2017-03-15 22:00:54 +00:00
Zack Weinberg
9090848d06 Narrowing the visibility of libc-internal.h even further. 
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.

It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore.  Indeed,
only 19 files actually need what remains of libc-internal.h.  23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!

So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.

        * include/libc-pointer-arith.h: New file.  Define
	cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
        PTR_ALIGN_DOWN here.
        * include/libc-internal.h: Definitions of above macros
	moved from here.  Don't include libc-diag.h anymore either.
	* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
        Don't include libc-internal.h.

	* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
	* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
	* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
	* string/strcoll_l.c, sysdeps/nacl/brk.c
	* sysdeps/unix/clock_settime.c
	* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
	* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
	* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
	* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
	Don't include libc-internal.h.

	* elf/get-dynamic-info.h, iconv/loop.c
	* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
	* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
	* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
	* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	* sysdeps/ieee754/dbl-64/k_rem_pio2.c
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	* sysdeps/ieee754/flt-32/k_rem_pio2f.c
	* sysdeps/ieee754/ldbl-128/k_tanl.c
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
	* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
	Include libc-diag.h instead of libc-internal.h.

        * elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
        * nptl/nptl-init.c, string/strcspn.c, string/strspn.c
	* malloc/malloc.c, sysdeps/i386/nptl/tls.h
	* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
	* sysdeps/unix/sysv/linux/spawni.c
        * sysdeps/x86_64/nptl/tls.h:
        Include libc-pointer-arith.h instead of libc-internal.h.

	* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
	* sysdeps/x86_64/atomic-machine.h:
        Add multiple include guard.
 2017-03-01 20:33:46 -05:00
Zack Weinberg
963394a22b Allow direct use of math_ldbl.h in testsuite. 
A few 'long double'-related tests include math_private.h just for
their variety of math_ldbl.h, which contains macros for assembling and
disassembling the binary representation of 'long double'.  math_ldbl.h
insists on being included from math_private.h, but if we relax this
restriction (and fix some portability sloppiness) we can use it
directly and not have to expose all of math_private.h to the testsuite.

	* sysdeps/generic/math_private.h: Use __BIG_ENDIAN and
	__LITTLE_ENDIAN, not BIG_ENDIAN and LITTLE_ENDIAN.

	* sysdeps/generic/math_ldbl.h
	* sysdeps/ia64/fpu/math_ldbl.h
	* sysdeps/ieee754/ldbl-128/math_ldbl.h
	* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
	* sysdeps/ieee754/ldbl-96/math_ldbl.h
	* sysdeps/powerpc/fpu/math_ldbl.h
	* sysdeps/x86_64/fpu/math_ldbl.h:
	Allow direct inclusion.  Use uintNN_t instead of u_intNN_t.
	Use __BIG_ENDIAN and __LITTLE_ENDIAN, not BIG_ENDIAN and
	LITTLE_ENDIAN.  Include endian.h and/or stdint.h if necessary.
	Add copyright notices.

	* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int):
	Don't use EXTRACT_WORDS64.

	* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c
	* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c:
	Include math_ldbl.h, not math_private.h.
 2017-02-25 10:40:48 -05:00
Tulio Magno Quites Machado Filho
51b34a9c47 Fix lgamma*, log10* and log2* results [BZ #21171] 
lgamma(-x) should return +Inf and raise divide-by-zero.
log10(+-0) and log2(+-0) should return -Inf and raise divide-by-zero.

Tested on powerpc, powerpc64, powerpc64le and x86_64.

	[BZ #21171]
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Return
	+Inf and raise divide-by-zero when x is negative.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Likewise.
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Likewise.

	* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10):  Return
	-Inf and raise divide-by-zero when x = +-0.
	* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
	* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f):	Likewise.
	* sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise.
	* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise.
 2017-02-17 09:07:57 -02:00
Gabriel F. T. Gomes
4918e5f4cd Fix y0 and y1 exception handling for zero input [BZ #21134] 
The Bessel functions of the second type (Yn) should raise the "divide
by zero" exception when input is zero (both positive and negative).
Current code gives the right output, but fails to set the exception.
This error is exposed for float, double, and long double when linking
with -lieee.  Without this flag, the error is not exposed, because the
wrappers for these functions, which use __kernel_standard
functionality, set the exception as expected.

Tested for powerpc64le.

	[BZ #21134]
	* sysdeps/ieee754/dbl-64/e_j0.c (__ieee754_y0): Raise the
	"divide by zero" exception when the input is zero.
	* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_y1): Likewise.
	* sysdeps/ieee754/flt-32/e_j0f.c (__ieee754_y0f): Likewise.
	* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_y1f): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_y0l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
 2017-02-15 10:30:59 -02:00
Gabriel F. T. Gomes
b987917e6a ldbl-128: Fix y0 and y1 for -Inf input [BZ #21130] 
The Bessel functions of the second type (Yn) are not defined for
negative input and should return NAN with the "invalid" exception
raised, in these cases.  However, current code checks for infinity and
return zero, regardless of the sign.  This error is exposed for long
double when linking with -lieee.  Without this flag, the error is not
exposed, because the wrappers for these functions, which use
__kernel_standard functionality, return the correct value.

Tested for powerpc64le.

	[BZ #21130]
	* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_y0l): Return NAN
	with the "invalid" exception raised when x is -Inf.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_y1l): Likewise.
 2017-02-12 18:30:38 -02:00
Gabriel F. T. Gomes
5ab621c347 Move w_exp to libm-compat-call-auto 
This patch adds the "_compat" suffix to the wrappers of the function
exp, which use _LIB_VERSION / matherr / __kernel_standard
functionality.

Tested for powerpc64le, s390, and x86_64.

	* math/Makefile (libm-calls): Move w_exp...
	(libm-compat-calls-auto): Here.

	* math/w_expl.c: Add suffix "_compat" to filename.
	* sysdeps/ia64/fpu/w_expl.c: Likewise.
	* sysdeps/ia64/fpu/w_expf.c: Likewise.
	* sysdeps/ia64/fpu/w_exp.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp.c: Likewise.
	* sysdeps/ieee754/flt-32/w_expf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl.c: Likewise.

	* math/w_expl_compat.c: New file, copied from above.
	* sysdeps/ia64/fpu/w_exp_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_expf_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
	* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
	* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.

	* sysdeps/ieee754/ldbl-64-128/w_expl.c: Add suffix "_compat"
	to filename.
	* sysdeps/ieee754/ldbl-opt/w_exp.c: Likewise.

	* sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: New file,
	copied from above and adjusted for the new filenames.
	* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Likewise.
 2017-02-08 17:44:20 -02:00
Gabriel F. T. Gomes
ea814db27a Move w_lgamma_r to libm-compat-calls-auto 
This patch adds the suffix "_compat" to lgamma_r wrappers and make
some adjustments to #includes and Makefiles.  This is a step towards
deprecation of wrappers that use _LIB_VERSION / matherr /
__kernel_standard functionality.

Tested for powerpc64le, s390, and x86_64.

	* math/Makefile (libm-calls): Move w_lgammaF_r...
	(libm-compat-calls-auto): Here.

	* math/w_lgamma_r.c: Add suffix "_compat" to filename.
	* math/w_lgammaf_r.c: Likewise.
	* math/w_lgammal_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammal_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise.
	* sysdeps/ia64/fpu/w_lgamma_r.c: Likewise.

	* math/w_lgamma_r_compat.c: New file, copied from above.
	* math/w_lgammaf_r_compat.c: Likewise.
	* math/w_lgammal_r_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_lgamma_r_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammaf_r_compat.c: Likewise.
	* sysdeps/ia64/fpu/w_lgammal_r_compat.c: Likewise.

	* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: Add suffix "_compat"
	to filename.
	* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: Likewise.

	* sysdeps/ieee754/ldbl-opt/w_lgamma_r_compat.c: New file
	copied from above and adjusted for the new filenames.
	* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
 2017-02-08 17:36:09 -02:00
Joseph Myers
edbbdb1855 Fix powf inaccuracy (bug 21112). 
Bug 21112 reports a case where powf is substantially inaccurate.  This
results from a multiplication where cp_h*p_h is required to be exact,
and p_h is masked to have only 12 leading nonzero bits in its
mantissa, but the value of cp_h has the 13th bit nonzero, leading to
inexact multiplication results in some cases that can result in large
errors in the final result of powf.  This patch fixes this by using a
value of cp_h correctly rounded to nearest to 12 bits, with a
corresponding updated value of cp_l.

Tested for x86_64 and x86.

	[BZ #21112]
	* sysdeps/ieee754/flt-32/e_powf.c (cp_h): Use value with trailing
	12 bits zero.
	(cp_l): Update for new value of cp_h.
	* math/auto-libm-test-in: Add another test of pow.
	* math/auto-libm-test-out-pow: Regenerated.
 2017-02-07 17:15:47 +00:00
Gabriel F. T. Gomes
f67d78192c Move wrappers to libm-compat-calls-auto 
This commit moves one step towards the deprecation of wrappers that
use _LIB_VERSION / matherr / __kernel_standard functionality, by
adding the suffix '_compat' to their filenames and adjusting Makefiles
and #includes accordingly.

New template wrappers that do not use such functionality will be added
by future patches and will be first used by the float128 wrappers.
 2017-01-04 16:25:04 -02:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
423c2b9d08 Add fromfp functions. 
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised.  This patch implements these functions for glibc.

These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures.  A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types.  For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.

As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.

The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.

The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results.  Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped.  The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future.  I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.

For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized.  Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected.  The patch initializes the variable to avoid those
errors.

With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fromfp): New declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
	* math/math.h: Include <bits/types.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
	constant and macro.
	(FP_INT_DOWNWARD): Likewise.
	(FP_INT_TOWARDZERO): Likewise.
	(FP_INT_TONEARESTFROMZERO): Likewise.
	(FP_INT_TONEAREST): Likewise.
	* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
	(fromfpf): Likewise.
	(fromfpl): Likewise.
	(ufromfp): Likewise.
	(ufromfpf): Likewise.
	(ufromfpl): Likewise.
	(fromfpx): Likewise.
	(fromfpxf): Likewise.
	(fromfpxl): Likewise.
	(ufromfpx): Likewise.
	(ufromfpxf): Likewise.
	(ufromfpxl): Likewise.
	* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
	s_fromfpxF and s_ufromfpxF.
	* math/gen-fromfp-tests.py: New file.
	* math/gen-fromfp-tests-inputs: Likewise.
	* math/libm-test.inc: Include <stdint.h>
	(check_intmax_t): New function.
	(check_uintmax_t): Likewise.
	(struct test_fiu_M_data): New type.
	(struct test_fiu_U_data): Likewise.
	(RUN_TEST_fiu_M): New macro.
	(RUN_TEST_LOOP_fiu_M): Likewise.
	(RUN_TEST_fiu_U): Likewise.
	(RUN_TEST_LOOP_fiu_U): Likewise.
	(fromfp_test_data): New array.
	(fromfp_test): New function.
	(fromfpx_test_data): New array.
	(fromfpx_test): New function.
	(ufromfp_test_data): New array.
	(ufromfp_test): New function.
	(ufromfpx_test_data): New array.
	(ufromfpx_test): New function.
	(main): Call fromfp_test, fromfpx_test, ufromfp_test and
	ufromfpx_test.
	* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
	characters.
	* math/test-tgmath-ret.c: Include <stdint.h>.
	(rm): New variable.
	(width): Likewise.
	(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
	called function.
	(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
	CHECK_RET_CONST_TYPE.
	(CHECK_RET_CONST_DOUBLE): Likewise.
	(CHECK_RET_CONST_LDOUBLE): Likewise.
	(CHECK_RET_CONST): Take extra arguments and pass them to calls
	macros.
	(fromfp): New CHECK_RET_CONST call.
	(ufromfp): Likewise.
	(fromfpx): Likewise.
	(ufromfpx): Likewise.
	(do_test): Call check_return_fromfp, check_return_ufromfp,
	check_return_fromfpx and check_return_ufromfpx.
	* math/test-tgmath.c: Include <stdint.h>
	(NCALLS): Increase to 138.
	(F(compile_test)): Initialize i.  Call fromfp functions.
	(F(fromfp)): New function.
	(F(fromfpx)): Likewise.
	(F(ufromfp)): Likewise.
	(F(ufromfpx)): Likewise.
	* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
	FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
	FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
	ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
	ufromfpxl.
	* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
	ufromfp and ufromfpx.
	* math/fromfp.h: New file.
	* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
	* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
	* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
	ufromfp, fromfpx and ufromfpx.
	(CFLAGS-nldbl-fromfp.c): New variable.
	(CFLAGS-nldbl-fromfpx.c): Likewise.
	(CFLAGS-nldbl-ufromfp.c): Likewise.
	(CFLAGS-nldbl-ufromfpx.c): Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-31 00:40:59 +00:00
Joseph Myers
41c67149b9 Add roundeven, roundevenf, roundevenl. 
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero).  As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs.  There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.

This patch implements these functions for glibc.  The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case).  It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired.  (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(roundeven): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
	macro.
	* math/Versions (roundeven): New libm symbol at version
	GLIBC_2.25.
	(roundevenf): Likewise.
	(roundevenl): Likewise.
	* math/Makefile (libm-calls): Add s_roundevenF.
	* math/libm-test.inc (roundeven_test_data): New array.
	(roundeven_test): New function.
	(main): Call roundeven_test.
	* math/test-tgmath.c (NCALLS): Increase to 134.
	(F(compile_test)): Call roundeven.
	(F(roundeven)): New function.
	* manual/arith.texi (Rounding Functions): Document roundeven,
	roundevenf and roundevenl.
	* manual/libm-err-tab.pl (@all_functions): Add roundeven.
	* include/math.h (roundeven): Use libm_hidden_proto.
	* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
	* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	roundeven.
	(CFLAGS-nldbl-roundeven.c): New variable.
	* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-21 01:48:27 +00:00
Joseph Myers
525f803984 Add fmaxmag, fminmag functions. 
TS 18661-1 defines fmaxmag and fminmag functions that return the
argument with maximum / minimum magnitude (acting like fmax / fmin if
the arguments have the same magnitude or either argument is a NaN).
These correspond to the IEEE 754-2008 operations maxNumMag and
minNumMag.  This patch implements these functions for glibc.  They are
implemented with type-generic templates.  Tests are based on those for
fmax and fmin.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fmaxmag): New declaration.
	(fminmag): Likewise.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New
	macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise.
	* math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25.
	(fmaxmagf): Likewise.
	(fmaxmagl): Likewise.
	(fminmag): Likewise.
	(fminmagf): Likewise.
	(fminmagl): Likewise.
	* math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF.
	* math/s_fmaxmag_template.c: New file.
	* math/s_fminmag_template.c: Likewise.
	* math/libm-test.inc (fmaxmag_test_data): New array.
	(fmaxmag_test): New function.
	(fminmag_test_data): New array.
	(fminmag_test): New function.
	(main): Call fmaxmag_test and fminmag_test.
	* math/test-tgmath.c (NCALLS): Increase to 132.
	(F(compile_test)): Call fmaxmag and fminmag.
	(F(fminmag)): New function.
	(F(fmaxmag)): Likewise.
	* manual/arith.texi (Misc FP Arithmetic): Document fminmag,
	fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl.
	* manual/libm-err-tab.pl (@all_functions): Add fmaxmag and
	fminmag.
	* sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file.
	* sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag
	and fminmag.
	(CFLAGS-nldbl-fmaxmag.c): New variable.
	(CFLAGS-nldbl-fminmag.c): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-20 00:46:53 +00:00
Gabriel F. T. Gomes
e4d6a83565 Make w_scalbln type-generic 
This patch converts the wrapper scalbln (which set errno directly
rather than doing anything with __kernel_standard) to use the
type-generic template machinery, in the same way that has been done
for ldexp.

Tested for powerpc64le, s390, and x86_64.
 2016-12-16 08:44:19 -02:00
Joseph Myers
0acb8a2a85 Refactor long double information into bits/long-double.h. 
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.

When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH.  In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.

As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h.  It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.

Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version).  After the patch, it's all in six bits/long-double.h
headers.  Furthermore, most of those new headers are not
architecture-specific.  Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt).  Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.

The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.

As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case.  There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers.  Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.

After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC.  Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.

Tested for x86_64 and x86.  Also did compilation-only testing with
build-many-glibcs.py.

	* bits/long-double.h: New file.
	* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
	* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
	* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
	* sysdeps/mips/bits/long-double.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
	* math/Makefile (headers): Add bits/long-double.h.
	* misc/sys/cdefs.h: Include <bits/long-double.h>.
	* stdlib/strtold.c: Include <bits/long-double.h> instead of
	<bits/wordsize.h>.
	* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
	[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
	* math/math.h: Do not include <bits/mathdef.h>.
	* sysdeps/aarch64/bits/mathdef.h: Remove file.
	* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
	inclusion.
	* sysdeps/ia64/bits/mathdef.h: Remove file.
	* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
	* sysdeps/mips/bits/mathdef.h: Likewise.
	* sysdeps/powerpc/bits/mathdef.h: Likewise.
	* sysdeps/s390/bits/mathdef.h: Likewise.
	* sysdeps/sparc/bits/mathdef.h: Likewise.
	* sysdeps/x86/bits/mathdef.h: Likewise.
	* sysdeps/s390/s390-32/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
	conditional code.
	* sysdeps/s390/s390-64/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
 2016-12-14 18:27:56 +00:00
Gabriel F. T. Gomes
14348aaeff Make w_log1p type-generic 
This patch converts the wrapper log1p (which set errno directly rather
than doing anything with __kernel_standard) to use the type-generic
template machinery, in the same way that has been done for ilogb.

Tested for powerpc64le, s390, and x86_64.
 2016-12-14 11:19:33 -02:00
Joseph Myers
58307649fb Fix hypot sNaN handling (bug 20940). 
TS 18661-1 generally defines libm functions taking sNaN arguments to
return qNaN and raise "invalid", even for the cases where a
corresponding qNaN argument would not result in a qNaN return.  This
includes hypot with one argument being an infinity and the other being
an sNaN.  This patch duly fixes hypot implementatations in glibc
(generic and powerpc) to ensure qNaN, computed by arithmetic on the
arguments, is returned in that case.

Various implementations do their checks for infinities and NaNs inline
by manipulating the representations of the arguments.  For simplicity,
this patch just uses issignaling to check for sNaN arguments.  This
could be inlined like the existing code (with due care about reversed
quiet NaN conventions, for implementations where that is relevant),
but given that all these checks are in cases where it's already known
at least one argument is not finite, which should be the uncommon
case, that doesn't seem worthwhile unless performance issues are
observed in practice.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #20940]
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not
	return Inf for arguments Inf and sNaN.
	* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf
	for arguments Inf and sNaN.  When returning a NaN, compute it by
	arithmetic on the arguments.
	* sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise.
	* math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
 2016-12-07 01:16:36 +00:00
Joseph Myers
90ab295a9e Fix sysdeps/ieee754 pow handling of sNaN arguments (bug 20916). 
Various pow function implementations mishandle sNaN arguments in
various ways.  This includes returning sNaN instead of qNaN for sNaN
arguments.  For arguments (1, sNaN) and (sNaN, 0), TS 18661-1
semantics are also that the result should be qNaN, whereas with a qNaN
argument there the result should be 1, but for the dbl-64
implementation of pow there are issues with sNaN arguments beyond not
implementing the TS 18661-1 semantics in those special cases.

This patch makes the implementations in sysdeps/ieee754 follow the TS
18661-1 semantics consistently.  Because x86 / x86_64 implementations
still need fixing, testcases are not included with this patch; they
will be included with the fix for the x86 / x86_64 versions.

Tested for x86_64, x86, mips64 and powerpc (with such testcases, which
pass in the mips64 and powerpc cases).

	[BZ #20916]
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return 1
	for arguments (sNaN, 0) or (1, sNaN).  Do arithmetic on NaN
	arguments to compute result.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Do not return
	1 for arguments (sNaN, 0) or (1, sNaN).
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
 2016-12-02 23:21:15 +00:00
Joseph Myers
72d839a42f Fix pow (qNaN, 0) result with -lieee (bug 20919), remove dead parts of wrappers. 
The dbl-64 implementation of __ieee754_pow returns a NaN for pow
(qNaN, 0) when it should return 1.  Normally this is covered up by the
wrappers ending up calling __kernel_standard which fixes up the result
for this case, but for -lieee the wrappers are bypassed and the bad
result gets through as a return value.

Now, the wrappers fixing this are dealing with variant error handling
that wants a result of NaN for pow (qNaN, 0), and only ever call
__kernel_standard for this case if NaN resulted from __ieee754_pow.
This leads to a question of whether the dbl-64 code might be
deliberately returning NaN in order to use those code paths.  However,
I can find no sign that this is deliberate.  If it were deliberate one
would expect other implementations to do the same, and would expect
the return of NaN to be very old, but it appears it came in by
accident when the present e_pow.c implementation replaced an fdlibm
implementation in 2001.  So it appears to be unintended that this path
through the pow wrapper could be used at all.

So this patch fixes the implementation to return 1 in this case as
expected.  This is consistent with all the other implementations.  The
relevant path through the wrappers is now unreachable, so is removed
(which is the main motivation of this patch: to avoid that path
becoming accidentally reachable when implementing TS 18661-1 semantics
that pow (sNaN, 0) should return qNaN with "invalid" raised).  Another
path that would require __ieee754_pow (0, 0) to return 0 is also
unreachable (as all implementations return 1, in accordance with C99
semantics), so is removed as well.

Note: we don't have anything set up to test -lieee, which in any case
is obsolescent (at some point we should remove the ability for new
programs to access _LIB_VERSION or define matherr and have it called
by glibc).  So testing will be implicit through sNaN tests added when
making sNaN inputs work correctly for pow functions.

Tested for x86_64 and x86.

	[BZ #20919]
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return
	NaN first argument when raised to power 0.
	* math/w_pow.c (__pow): Do not check for NaN or zero results from
	raising to power zero.
	* math/w_powf.c (__powf): Likewise.
	* math/w_powl.c (__powl): Likewise.
	* sysdeps/ieee754/k_standard.c (__kernel_standard): Do not handle
	pow (0, 0) or pow (NaN, 0).
 2016-12-02 22:50:46 +00:00
Joseph Myers
55a38f8236 Add llogb, llogbf, llogbl. 
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int.  Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.

This patch implements these functions and macros for glibc.  llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations.  Tests are also
based on those for ilogb.

Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>).  The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros).  So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
	New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
	macro.
	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
	New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
	* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
	(llogbf): Likewise.
	(llogbl): Likewise.
	* math/Makefile (gen-libm-calls): Add w_llogbF.
	(tests): Add test-fp-llogb-constants.
	* math/w_llogb_template.c: New file.  Based on
	math/w_ilogb_template.c.
	* math/libm-test.inc (llogb_test_data): New array.
	(llogb_test): New function.
	(main): Call llogb_test.
	* math/test-fp-llogb-constants.c: New file.  Based on
	math/test-fp-ilogb-constants.c.
	* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
	(do_test): Call check_return_llogb.
	* math/test-tgmath.c (NCALLS): Increase to 126.
	(F(compile_test)): Call llogb.
	(F(llogb)): New function.
	* manual/math.texi (Exponents and Logarithms): Document llogb,
	llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
	* manual/libm-err-tab.pl (@all_functions): Add llogb.
	* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
	* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
	(CFLAGS-nldbl-llogb.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-12-02 01:42:49 +00:00
Joseph Myers
6dc0741677 Make ldbl-128 getpayload, setpayload functions use _Float128. 
When I added the getpayload and setpayload functions I failed to make
the ldbl-128 functions use the _Float128 type name like most other
ldbl-128 functions do in preparation for being used to implement *f128
functions.  This patch fixes them to use that name.

Tested for mips64.

	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Use
	_Float128 instead of long double.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c (FUNC): Likewise.
 2016-12-01 23:23:51 +00:00
Joseph Myers
e5277ba25d Make ilogb wrappers type-generic. 
This patch converts the ilogb wrappers (which set errno directly
rather than doing anything with __kernel_standard) to use the
type-generic template machinery.  This is intended as preparation for
adding llogb.

Tested for x86_64 and x86, and tested compile for other architectures
with build-many-glibcs.py.

	* math/w_ilogb_template.c: New file.  Based on math/w_ilogb.c.
	* math/w_ilogb.c: Remove.
	* math/w_ilogbf.c: Likewise.
	* math/w_ilogbl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_ilogb.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_ilogbl.c: Likewise.
	* math/Makefile (gen-libm-calls): Add w_ilogbF.
	(libm-calls): Remove w_ilogbF.
	* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h
	(LDOUBLE_ilogbl_libm_version): New macro.
 2016-11-28 23:27:23 +00:00
Joseph Myers
457663a7cd Add setpayloadsig, setpayloadsigf, setpayloadsigl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayloadsig functions for glibc; these are
like the setpayload functions, but produce a signaling NaN instead of
a quiet NaN.

The substance of the implementation was included with the setpayload
implementation, so the new files here just need to wrap the main files
with different defines to build the new functions.

Because the functions store a signaling NaN via a pointer and the
libm-test macros choose a suitable initial value for the variable in
such a case by comparing with the expected value, the relevant macro
needs to clear exceptions after FE_INVALID may have been raised by
that comparison.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayloadsig): New declaration.
	* math/Versions (setpayloadsig): New libm symbol at version
	GLIBC_2.25.
	(setpayloadsigf): Likewise.
	(setpayloadsigl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadsigF.
	* math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept
	(FE_ALL_EXCEPT) after initializing EXTRA_VAR.
	(setpayloadsig_test_data): New array.
	(setpayloadsig_test): New function.
	(main): Call setpayloadsig_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayloadsig,
	setpayloadsigf and setpayloadsigl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file.
	* sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayloadsig.
	(CFLAGS-nldbl-setpayloadsig.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-24 23:56:48 +00:00
Joseph Myers
eb3c12c784 Add setpayload, setpayloadf, setpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid.  The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.

The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month).  This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(setpayload): New declaration.
	* math/Versions (setpayload): New libm symbol at version
	GLIBC_2.25.
	(setpayloadf): Likewise.
	(setpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_setpayloadF.
	* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
	test_Ff_b1_data.
	(RUN_TEST_Ff_b1): New macro.
	(RUN_TEST_LOOP_Ff_b1): Likewise.
	(canonicalize_test_data): Update type.
	(setpayload_test_data): New array.
	(setpayload_test): New function.
	(main): Call setpayload_test.
	* manual/arith.texi (FP Bit Twiddling): Document setpayload,
	setpayloadf and setpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
	* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
	Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
	* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	setpayload.
	(CFLAGS-nldbl-setpayload.c): New variable.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-11-19 00:16:28 +00:00
Joseph Myers
b4e75104b4 Refactor some libm type-generic macros. 
This patch refactors some type-generic libm macros, in both math.h and
math_private.h, to be based on a common __MATH_TG macro rather than
all replicating similar logic to choose a function to call based on
the type of the argument.

This should serve to illustrate what I think float128 support for such
macros should look like: common macros such as __MATH_TG may need
different definitions depending on whether float128 is supported in
glibc, so that the individual macros themselves do not need
conditionals on float128 support.

Tested for x86_64, x86, mips64 and powerpc.

	* math/math.h (__MATH_TG): New macro.
	[__USE_ISOC99] (fpclassify): Define using __MATH_TG.
	[__USE_ISOC99] (signbit): Likewise.
	[__USE_ISOC99] (isfinite): Likewise.
	[__USE_ISOC99] (isnan): Likewise.
	[__USE_ISOC99] (isinf): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (issignaling): Likewise.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (__MATH_EVAL_FMT2): New macro.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): Define using
	__MATH_TG and __MATH_EVAL_FMT2.
	* sysdeps/generic/math_private.h (fabs_tg): Define using
	__MATH_TG.
	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h
	[!__NO_LONG_DOUBLE_MATH] (__iscanonicalf): New macro.
	[!__NO_LONG_DOUBLE_MATH] (__iscanonical): Likewise.
	[!__NO_LONG_DOUBLE_MATH] (iscanonical): Define using __MATH_TG.
	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (__iscanonicalf): New
	macro.
	(__iscanonical): Likewise.
	(iscanonical): Define using __MATH_TG.
 2016-11-10 21:41:56 +00:00
Joseph Myers
eaf5ad0bc4 Add canonicalize, canonicalizef, canonicalizel. 
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation.  This patch implements
these functions for glibc.

As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations.  However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value).  Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations.  Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.

The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format.  Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".

libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them).  As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0.  (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)

The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(canonicalize): New declaration.
	* math/Versions (canonicalize): New libm symbol at version
	GLIBC_2.25.
	(canonicalizef): Likewise.
	(canonicalizel): Likewise.
	* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
	* math/s_canonicalize_template.c: New file.
	* math/libm-test.inc: Update comment on functions tested and
	testing of NaN payloads.
	(TEST_NAN_PAYLOAD): New macro.
	(NO_TEST_INLINE): Update value.
	(XFAIL_TEST): Likewise.
	(ERRNO_UNCHANGED): Likewise.
	(ERRNO_EDOM): Likewise.
	(ERRNO_ERANGE): Likewise.
	(IGNORE_RESULT): Likewise.
	(NON_FINITE): Likewise.
	(TEST_SNAN): Likewise.
	(NO_TEST_MATHVEC): Likewise.
	(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
	(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
	(struct test_Ffp_b1_data): New type.
	(RUN_TEST_Ffp_b1): New macro.
	(RUN_TEST_LOOP_Ffp_b1): Likewise.
	(canonicalize_test_data): New array.
	(canonicalize_test): New function.
	(main): Call canonicalize_test.
	* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
	canonicalizef and canonicalizel.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
	* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	canonicalize.
	(CFLAGS-nldbl-canonicalize.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
	to ...
	* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
	... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
	test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
	Use libm_hidden_def.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
	* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
	(do_test): Also test canonicalizel.
	* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
	test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
	* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
	libm_hidden_def.
	* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
	macro.
	* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
	(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-26 23:14:31 +00:00
Joseph Myers
873febb5df Add getpayloadl to libnldbl. 
This patch adds getpayloadl to libnldbl, missed in my patch that
originally implemented getpayload functions.

Tested for powerpc.

	* sysdeps/ieee754/ldbl-opt/nldbl-getpayload.c: New file.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	getpayload.
	(CFLAGS-nldbl-getpayload.c): New variable.
 2016-10-26 17:10:00 +00:00
Gabriel F. T. Gomes
6962682ffe Add strfromd, strfromf, and strfroml functions 
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml.  This is being done in
preparation for the new floating-point type, float128.  The added functions
convert a floating-point value into a string, with configurable format.
 2016-10-25 17:03:54 -02:00
Joseph Myers
f8e8b8ed9f Add getpayload, getpayloadf, getpayloadl. 
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type.  The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless.  A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(getpayload): New declaration.
	* math/Versions (getpayload): New libm symbol at version
	GLIBC_2.25.
	(getpayloadf): Likewise.
	(getpayloadl): Likewise.
	* math/Makefile (libm-calls): Add s_getpayloadF.
	* math/libm-test.inc: Include <nan-high-order-bit.h>.
	(struct test_f_f_data): Add comment.
	(RUN_TEST_fp_f): New macro.
	(RUN_TEST_LOOP_fp_f): Likewise.
	(getpayload_test_data): New array.
	(getpayload_test): New function.
	(main): Call getpayload_test.
	* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
	descriptor.
	* manual/arith.texi (FP Bit Twiddling): Document getpayload,
	getpayloadf and getpayloadl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
	* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-19 01:49:09 +00:00
Joseph Myers
6f322a8947 Define HIGH_ORDER_BIT_IS_SET_FOR_SNAN to 0 or 1. 
This patch moves the HIGH_ORDER_BIT_IS_SET_FOR_SNAN macro from being
defined or undefined to the preferred convention of always being
defined, to either 0 or 1, so allowing typo-proof tests with #if.

The macro is moved from math_private.h to a new header
nan-high-order-bit.h to make it easy for all architectures to define,
either through the sysdeps/generic version of the header or through
providing their own version of the header, without needing #ifndef in
the generic math_private.h to give a default definition.  The move
also allows the macro to be used without needing math_private.h to be
included; the immediate motivation of this patch is to allow tests to
access this information (to know what kinds of NaNs 0 is a valid
payload for) without needing to include math_private.h.  Existing
C level rather than preprocessor conditionals at all, but this patch
does not make such a change).

Tested for x86_64 and x86 (testsuite); also verified for x86_64, x86,
mips64 and powerpc that installed stripped shared libraries are
unchanged by the patch.

	* sysdeps/generic/nan-high-order-bit.h: New file.
	* sysdeps/hppa/nan-high-order-bit.h: Likewise.
	* sysdeps/mips/nan-high-order-bit.h: Likewise.
	* sysdeps/hppa/math_private.h: Remove file.
	* sysdeps/mips/math_private.h (HIGH_ORDER_BIT_IS_SET_FOR_SNAN): Do
	not define here.
	* sysdeps/ieee754/dbl-64/s_issignaling.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/flt-32/s_issignalingf.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128/s_issignalingl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128ibm/s_issignalingl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-96/s_issignalingl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
	<nan-high-order-bit.h>.
	[HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Test with #if not #ifdef.
 2016-10-17 22:48:51 +00:00
Joseph Myers
cc6a8d7457 Add totalordermag, totalordermagf, totalordermagl. 
In addition to the totalorder functions, TS 18661-1 defines
totalordermag functions, which do the same comparison but on the
absolute values of the arguments.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
In general the implementations are similar to but simpler than those
for the totalorder functions.

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalordermag): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag):
	New macro.
	* math/Versions (totalordermag): New libm symbol at version
	GLIBC_2.25.
	(totalordermagf): Likewise.
	(totalordermagl): Likewise.
	* math/Makefile (libm-calls): Add s_totalordermagF.
	* math/libm-test.inc (totalordermag_test_data): New array.
	(totalordermag_test): New function.
	(main): Call totalordermag_test.
	* math/test-tgmath.c (NCALLS): Increase to 125.
	(F(compile_test)): Call totalordermag.
	(F(totalordermag)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalordermag, totalordermagf and totalordermagl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalordermag.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalordermag.
	(CFLAGS-nldbl-totalordermag.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
	(do_test): Also test totalordermagl.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
	Likewise.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-15 00:36:48 +00:00
steve ellcey-CA Eng-Software
e223d1fe72 Fix warnings from latest GCC. 
* sysdeps/ieee754/dbl-64/e_pow.c (checkint) Make conditions explicitly
	boolean.
 2016-10-14 12:53:27 -07:00
Joseph Myers
5e9d98a3d9 Add totalorder, totalorderf, totalorderl. 
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008.  This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)

The description of the totalOrder operation is complicated.  However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation.  For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations.  (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.)  So the
complications are:

* When MIPS quiet NaN conventions are in use, the representation of
  NaNs needs adjusting before making such an integer comparison.  This
  patch does this adjustment only when both arguments are NaNs, as
  there's no need for it if only one is a NaN, and as long as both are
  NaNs you can just flip the relevant bits without any problems from
  this turning a NaN into an infinity.

* For the m68k version of ldbl-96, where the high mantissa bit is
  "don't care" for infinities and NaNs, representations where it
  differs must compare the same.  Note: although the testcase for this
  compiles, I have not actually tested on m68k.

* For ldbl-128ibm, the low part must be ignored when the high part is
  NaN, and low parts of +0 and -0 must be considered the same whatever
  the high part.

The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs.  Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).

Tested for x86_64, x86, mips64 and powerpc.

	* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(totalorder): New declaration.
	* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
	New macro.
	* math/Versions (totalorder): New libm symbol at version
	GLIBC_2.25.
	(totalorderf): Likewise.
	(totalorderl): Likewise.
	* math/Makefile (libm-calls): Add s_totalorderF.
	* math/gen-libm-test.pl (parse_args): Escape quotes in test name
	string.
	* math/libm-test.inc (PAYLOAD_DIG): New macro.
	(qnan_value_pl): Likewise.
	(snan_value_pl): Likewise.
	(qnan_value): Define using qnan_value_pl.
	(snan_value): Define using snan_value_pl.
	(struct test_ff_i_data): Add comment about which tests use this
	structure.
	(RUN_TEST_ff_b): New macro.
	(RUN_TEST_LOOP_ff_b): Likewise.
	(totalorder_test_data): New array.
	(totalorder_test): New function.
	(main): Call totalorder_test.
	* math/test-tgmath.c (NCALLS): Increase to 122.
	(F(compile_test)): Call totalorder.
	(F(totalorder)): New function.
	* manual/arith.texi (FP Comparison Functions): Document
	totalorder, totalorderf and totalorderl.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
	* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
	totalorder.
	(CFLAGS-nldbl-totalorder.c): New variable.
	* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
	Add test-totalorderl-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
	* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
	test-totalorderl-ldbl-96.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-10-12 01:20:30 +00:00
Siddhesh Poyarekar
36ee03e6a8 Update comments for some functions in s_sin.c 
Update comments for some functions to bring them in sync with what the
functions are actually doing.
 2016-10-06 13:09:02 +05:30
Siddhesh Poyarekar
9cb069308c Adjust calls to do_sincos_1 and do_sincos_2 in s_sincos.c 
Adjust calls to do_sincos_1 and do_sincos_2 to pass a boolean
shift_quadrant instead of the numeric 0 and 1.

This does not affect codegen.
 2016-10-06 12:57:07 +05:30
Siddhesh Poyarekar
ead1ef37d2 Make quadrant shift a boolean in reduce_and_compute in s_sin.c 
Like the previous change, make the quadrant shift a boolean to make it
clearer that we will do at most a single rotation of the quadrants to
compute the cosine from the sine function.

This does not affect codegen.
 2016-10-06 12:54:04 +05:30
Siddhesh Poyarekar
ba4e688461 Check n instead of k1 to decide on sign of sin/cos result 
For k1 in 1 and 3, n can only have values of 0 and 2, so checking k1 &
2 is equivalent to checking n & 2.  We prefer the latter so that we
don't use k1 for anything other than selecting the quadrant in
do_sincos_1, thus dropping it completely.

The previous logic was:

    "Compute sine for the value and based on the new rotated quadrant
     (k1) negate the value if we're in the fourth quadrant."

With this change, the logic now is:

    "Compute sine for the value and negate it if we were either (1) in
     the fourth quadrant or (2) we actually wanted the cosine and were
     in the third quadrant."

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Check N
	instead of K1.
 2016-10-06 00:34:26 +05:30
Siddhesh Poyarekar
b8b7e5e644 Make the quadrant shift K a bool in do_sincos_* functions 
The do_sincos_* functions are helpers to compute sin/cos, where they
get cosine by computing sine for the next quadrant.  This is decided
with the value of K passed to it, which is the amount by which to
shift the quadrant.  Since we will only need the shift to be 0 or 1,
we make K a bool to make that explicit.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Rename K to
	SHIFT_QUADRANT and make it bool.
	(do_sincos_2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(__sin): Adjust calls to do_sincos_1 and do_sincos_2.
	(__cos): Likewise.
 2016-10-06 00:33:54 +05:30
Joseph Myers
f280fa6d17 Use __builtin_fma more in dbl-64 code. 
sysdeps/ieee754/dbl-64/dla.h can use a macro DLA_FMS for more
efficient double-width operations when fused multiply-subtract is
supported.  However, this macro is only defined for x86_64,
conditional on architecture-specific __FMA4__.  This patch makes the
code use __builtin_fma conditional on __FP_FAST_FMA, as used elsewhere
in glibc.

Tested for x86_64, x86 and powerpc.  On powerpc (where this is causing
fused operations to be used where they weren't previously) I see an
increase from 1ulp to 2ulp in the imaginary part of clog10:

testing double (without inline functions)
Failure: Test: Imaginary part of: clog10 (0x1.7a858p+0 - 0x6.d940dp-4 i)
Result:
 is:         -1.2237865208199886e-01  -0x1.f5435146bb61ap-4
 should be:  -1.2237865208199888e-01  -0x1.f5435146bb61cp-4
 difference:  2.7755575615628914e-17   0x1.0000000000000p-55
 ulp       :  2.0000
 max.ulp   :  1.0000
Maximal error of real part of: clog10
 is      : 3 ulp
 accepted: 3 ulp
Maximal error of imaginary part of: clog10
 is      : 2 ulp
 accepted: 1 ulp

This is actually resulting from atan2 becoming *more* accurate (atan2
(-0x6.d940dp-4, 0x1.7a858p+0) should ideally be -0x1.208cd6e841554p-2
but was -0x1.208cd6e841555p-2 from a powerpc libm built before this
change, and is -0x1.208cd6e841554p-2 from a powerpc libm built after
this change).  Since these functions are not expected to be correctly
rounding by glibc's accuracy goals, neither result is a problem, but
this does imply that some of this code, although designed to be
correctly rounding, is not in fact correctly rounding (possibly
because of GCC creating fused operations where the code does not
expect it, something we've only disabled for specific functions where
it was found to cause large errors).  (Of course as previously
discussed I think we should remove the slow cases where an error
analysis shows this wouldn't increase the errors much above 0.5ulp;
it's only functions such as cratan2 that are expected to be correctly
rounding, not atan2.)

	* sysdeps/ieee754/dbl-64/dla.h [__FP_FAST_FMA] (DLA_FMS): Define
	macro to use __builtin_fma.
	* sysdeps/x86_64/fpu/dla.h: Remove file.
 2016-09-30 15:49:51 +00:00
Joseph Myers
8278d50ce7 Fix ldbl-128ibm iscanonical for -mlong-double-64. 
This patch fixes the ldbl-128ibm version of the iscanonical macro not
to use __iscanonicall when long double = double (-mlong-double-64).

Tested for powerpc.

	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h
	[__NO_LONG_DOUBLE_MATH] (__iscanonicall): Do not declare.
	[__NO_LONG_DOUBLE_MATH] (iscanonical): Define to evaluate to 1.
 2016-09-30 15:08:08 +00:00
Joseph Myers
29cb929332 Add iscanonical. 
TS 18661-1 adds an iscanonical classification macro to <math.h>.

The motivation for this is decimal floating-point, where some values
have both canonical and noncanonical encodings.  For IEEE binary
interchange formats, all encodings are canonical.  For x86/m68k
ldbl-96, and for ldbl-128ibm, there are encodings that do not
represent any valid value of the type; although formally iscanonical
does not need to handle trap representations (and so could just always
return 1), it seems useful, and in line with the description in the TS
of "representations that are extraneous to the floating-point model"
as being non-canonical (as well as "redundant representations of some
or all of its values"), for it to detect those representations and
return 0 for them.

This patch adds iscanonical to glibc.  It goes in a header
<bits/iscanonical.h>, included under appropriate conditions in
<math.h>.  The default header version just evaluates the argument
(converted to its semantic type, though current GCC will probably
discard that conversion and any exceptions resulting from it) and
returns 1.  ldbl-96 and ldbl-128ibm then have versions of the header
that call a function __iscanonicall for long double (the sizeof-based
tests will of course need updating for float128 support, like other
such type-generic macro implementations).  The ldbl-96 version of
__iscanonicall has appropriate conditionals to reflect the differences
in the m68k version of that format (where the high mantissa bit may be
either 0 or 1 when the exponent is 0 or 0x7fff).  Corresponding tests
for those formats are added as well.  Other architectures do not have
any new functions added because just returning 1 is correct for all
their floating-point formats.

Tested for x86_64, x86, mips64 (to test the default macro version) and
powerpc.

	* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include
	<bits/iscanonical.h>.
	* bits/iscanonical.h: New file.
	* math/s_iscanonicall.c: Likewise.
	* math/Versions (__iscanonicall): New libm symbol at version
	GLIBC_2.25.
	* math/libm-test.inc (iscanonical_test_data): New array.
	(iscanonical_test): New function.
	(main): Call iscanonical_test.
	* math/Makefile (headers): Add bits/iscanonical.h.
	(type-ldouble-routines): Add s_iscanonicall.
	* manual/arith.texi (Floating Point Classes): Document
	iscanonical.
	* manual/libm-err-tab.pl: Update comment on interfaces without
	ulps tabulated.
	* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c:
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
	test-iscanonical-ldbl-128ibm.
	* sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file.
	* sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise.
	* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise.
	* sysdeps/ieee754/ldbl-96/Makefile: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-09-30 00:27:50 +00:00
Siddhesh Poyarekar
2bf499708d Use copysign instead of ternary for some sin/cos input ranges 
These are remaining cases where we can deduce and conclude that the
sign of the result should be the same as the sign of the input being
checked.  For example, for sin(x), the sign of the result is the same
as the result itself for x < pi.  Likewise, for sine values where x
after range reduction falls into this range and its sign is preserved.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Use copysign
	instead of ternary condition.
	(do_sincos_2): Likewise.
	(__sin): Likewise.
	(__cos): Likewise.
	(slow): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(bsloww): Likewise.
	(bsloww1): Likewise.
 2016-09-30 05:19:05 +05:30
Siddhesh Poyarekar
3459931a1a Use copysign instead of ternary conditions for positive constants 
This is the first very simple substitution of ternary conditions for
correction adjustments with __copysign for positive constants.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos_slow): use copysign
	instead of ternary condition.
	(do_sin_slow): Likewise.
	(do_sincos_1): Likewise.
	(do_sincos_2): Likewise.
	(__cos): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bsloww): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
 2016-09-30 05:17:55 +05:30
Siddhesh Poyarekar
a87b5e95ad consolidate sign checks for slow2 
Simplify the code a bit by consolidating sign checks in slow1 and
slow2 into __sin at the higher level.

	* sysdeps/ieee754/dbl-64/s_sin.c (slow1): Consolidate sign
	check from here...
	(slow2): ... and here...
	(__sin): ... to here.
 2016-09-30 05:15:56 +05:30
Paul E. Murphy
2c46d11486 Build s_nan* objects from a generic template 
This requires adding a macro to synthesize the call
to __strto*_nan.  Since this is likely to be the only
usage ever for strto* functions in generated libm
calls, a dedicated macro is defined for it.
 2016-09-20 14:37:42 -05:00
Paul E. Murphy
9f9834f582 Make ldexpF generic. 
This one is a little more tricky since it is built both for
libm and libc, and exports multiple aliases.

To simplify aliasing, a new macro is introduced which handles
aliasing to two symbols.  By default, it just applies
declare_mgen_alias to both target symbols.

Likewise, the makefile is tweaked a little to generate
templates for shared files too, and a new rule is added
to build m_*.c objects from the objpfx directory.

Verified there are no symbol or code changes using a script
to diff the *_ldexp* object files on s390x, aarch64, arm,
x86_64, and ppc64.
 2016-09-20 14:37:40 -05:00
Paul E. Murphy
02bbfb414f ldbl-128: Use L(x) macro for long double constants 
This runs the attached sed script against these files using
a regex which aggressively matches long double literals
when not obviously part of a comment.

Likewise, 5 digit or less integral constants are replaced
with integer constants, excepting the two cases of 0 used
in large tables, which are also the only integral values
of the form x.0*E0L encountered within these converted
files.

Likewise, -L(x) is transformed into L(-x).

Naturally, the script has a few minor hiccups which are
more clearly remedied via the attached fixup patch.  Such
hiccups include, context-sensitive promotion to a real
type, and munging constants inside harder to detect
comment blocks.
 2016-09-13 15:33:59 -05:00
Siddhesh Poyarekar
54c86ccab6 Inline all support functions for sin and cos 
The support functions for sin and cos have a lot of identical
functionality, so inlining them gives a pretty decent jump in
functionality: ~19% in the sincos function.  On SPEC2006 this
translates to about 2.1% in the tonto test.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Mark as inline.
	(do_cos_slow): Likewise.
	(do_sin): Likewise.
	(do_sin_slow): Likewise.
	(slow): Likewise.
	(slow1): Likewise.
	(slow2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bsloww): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
	(cslow2): Likewise.
 2016-09-02 20:08:41 +05:30
Siddhesh Poyarekar
25e440c6c7 Use do_sin for sin(x) where 0.25 < |x| < 0.855469 
The only code looks slightly different from do_sin but on closer
examination, should give exactly the same result.  Drop it in favour
of the do_sin function call.

	* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Use do_sin.
 2016-09-02 20:08:41 +05:30
Siddhesh Poyarekar
758e79ec89 Consolidate input partitioning into do_cos and do_sin 
All calls to do_cos are preceded by code that partitions x into a
larger double that gives an offset into the sincos table and a smaller
double that is used in a polynomial computation.  Consolidate all of
them into do_cos and do_sin to reduce code duplication.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos): Accept X and DX as input
	arguments.  Consolidate input partitioning from callers here.
	(do_cos_slow): Likewise.
	(do_sin): Likewise.
	(do_sin_slow): Likewise.
	(do_sincos_1): Remove the no longer necessary input partitioning.
	(do_sincos_2): Likewise.
	(__sin): Likewise.
	(__cos): Likewise.
	(slow1): Likewise.
	(slow2): Likewise.
	(sloww1): Likewise.
	(sloww2): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
	(cslow2): Likewise.
 2016-09-02 20:08:41 +05:30
Paul E. Murphy
f306ea1ada Make common fmin implementation generic. 2016-09-01 09:31:05 -05:00
Paul E. Murphy
847c9161c7 Make common fmax implementation generic. 
Also update aarch64 to ensure the correct s_fmin.c is included.
The include order favors including the generated copy.
 2016-09-01 09:31:05 -05:00
Paul E. Murphy
ee8a49071c Make common nextdown implementation generic. 
With the exception of those machines using the ldbl-opt in
an Implies file, this is a trivial transformation.

nextdownl is not subject to the non-trivial versioning rules
of the other generated functions, so to keep things simple,
it is handled as a one-off case in ldbl-opt to preserve the
existing behavior.
 2016-09-01 09:31:03 -05:00
Paul E. Murphy
7b7c39450b Make common fdim implementation generic. 
The only difference is the usage of math_narrow_eval when
building s_fdiml.c.  This should be harmless for long double,
but I did observe some code generation changes on m68k, but
lack the resources to test it.

Likewise, to more easily support overriding symbol generation,
the aliasing macros are always conditionally defined on their
absence to reduce boilerplate.

I also ran builds for i486, ppc64, sparcv9, aarch64,
s390x and observed no changes to s_fdim* objects.
 2016-09-01 09:28:05 -05:00
Paul E. Murphy
de6b6d14e9 ldbl-128: Cleanup e_gammal_r.c after _Float128 rename 2016-08-31 17:17:03 -05:00
Paul E. Murphy
15089e046b ldbl-128: Rename 'long double' to '_Float128' 
Add a layer of macro indirection for long double files
which need to be built using another typename.  Likewise,
add the L(num) macro used in a later patch to override
real constants.

These macros are only defined through the ldbl-128
math_ldbl.h header, thereby implicitly restricting
these macros to machines which back long double
with an IEEE binary128 format.

Likewise, appropriate changes are made for the few
files which indirectly include such ldbl-128 files.

These changes produce identical binaries for s390x,
aarch64, and ppc64.
 2016-08-31 10:38:11 -05:00
Siddhesh Poyarekar
9d84d0e51d Use fabs(x) instead of branching on signedness of input to sin and cos 
The sin and cos code is inconsistent about its use of fabs to get the
absolute value of X where in some places it conditionalizes the code
while in others it uses fabs.  fabs seems to be a better candidate in
most cases because it avoids a branch.  Similarly there is an attempt
to make it easier for the compiler to emit conditional assignment
instructions (like fcsel on aarch64) where it can, by isolating
conditional assignment constructs from the rest of the expression.

A further benefit of this change is to identify common constructs
across functions and consolidate them in future patches.

	* sysdeps/ieee754/dbl-64/s_sin.c (do_cos_slow): Use ternary
	instead of if/else.
	(do_sin_slow): Likewise.
	(do_sincos_1): Use fabs instead of if/else.
	(do_sincos_2): Likewise.
	(__sin): Likewise.
	(__cos): Likewise.
	(slow2): Likewise.
	(sloww): Likewise.
	(sloww1): Likewise.  Drop argument M.
	(sloww2): Use fabs instead of if/else.
	(bsloww): Likewise.
	(bsloww1): Likewise.
	(bsloww2): Likewise.
 2016-08-30 13:01:59 +05:30
Siddhesh Poyarekar
1a822c6184 Add fall through comments 
Add fall through comments I had missed writing in previously.
 2016-08-30 13:00:29 +05:30
Siddhesh Poyarekar
32efd690bd Consolidate reduce_and_compute code 
This patch reshuffles the reduce_and_compute code so that the
structure matches other code structures of the same type elsewhere in
s_sin.c and s_sincos.c.  This is the beginning of an attempt to
consolidate and reduce code duplication in functions in s_sin.c to
make it easier to read and possibly also easier for the compiler to
optimize.

	* sysdeps/ieee754/dbl-64/s_sin.c (reduce_and_compute):
	Consolidate switch cases 0 and 2.
 2016-08-30 12:51:39 +05:30
Paul E. Murphy
feb62ddacb Convert remaining complex function to generated files 
Convert cpow, clog, clog10, cexp, csqrt, and cproj functions
into generated templates.  Note, ldbl-opt still retains
s_clog10l.c as the aliasing rules are non-trivial.
 2016-08-29 12:43:38 -05:00
Paul E. Murphy
d5602cebf1 Convert _Complex tangent functions to generated code 
This converts s_c{,a}tan{,h}{f,,l} into a single
templated file c{,a}tan{,h}_template.c with the
exception of alpha.
 2016-08-19 16:47:31 -05:00
Paul E. Murphy
c50eee19c4 Convert _Complex sine functions to generated code 
Refactor s_c{,a}sin{,h}{f,,l} into a single templated
macro.
 2016-08-19 16:46:41 -05:00
Paul E. Murphy
4482ff226e Merge common usage of mul_split function 
A number of files share identical code for the
mul_split function.

This moves the duplicated function mul_split into its
own header, and refactors the fma usage into a single
selection macro.  Likewise, mul_split when used by a
long double implementation is renamed mul_splitl for
clarity.
 2016-08-19 11:29:43 -05:00
Paul E. Murphy
01ee387015 Convert _Complex cosine functions to generated code 
This is fairly straight fowards.  m68k overrides are
updated to use the framework, and thus are simplified
a bit.
 2016-08-19 11:28:55 -05:00
Stefan Liebler
b65f0b7b2e Get rid of array-bounds warning in __kernel_rem_pio2[f] with gcc 6.1 -O3. 
On s390x I get the following werror when build with gcc 6.1 (or current gcc head) and -O3:
../sysdeps/ieee754/dbl-64/k_rem_pio2.c: In function ‘__kernel_rem_pio2’:
../sysdeps/ieee754/dbl-64/k_rem_pio2.c:254:18: error: array subscript is below array bounds [-Werror=array-bounds]
    for (k = 1; iq[jk - k] == 0; k++)
                ~~^~~~~~~~
I get the same error with sysdeps/ieee754/flt-32/k_rem_pio2f.c.

This patch adds DIAG_* macros around it.

ChangeLog:

	* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
	Use DIAG_*_NEEDS_COMMENT macro to get rid of array-bounds warning.
	* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
	Likewise.
 2016-08-18 12:20:35 +02:00
Paul E. Murphy
ee19f1de0d ldbl-128: Remove unused sqrtl declaration in e_asinl.c 
This did not alter compilation for s390x and aarch64
targets.
 2016-08-17 14:06:54 -05:00
Paul E. Murphy
ce6698ea0a Support for type-generic libm function implementations libm 
This defines a new classes of libm objects.  The
<func>_template.c file which is used in conjunction
with the new makefile hooks to derive variants for
each type supported by the target machine.

The headers math-type-macros-TYPE.h are used to supply
macros to a common implementation of a function in
a file named FUNC_template.c and glued togethor via
a generated file matching existing naming in the
build directory.

This has the properties of preserving the existing
override mechanism and not requiring any arcane
build system twiddling.  Likewise, it enables machines
to override these files without any additional work.

I have verified the built objects for ppc64, x86_64,
alpha, arm, and m68k do not change in any meaningful
way with these changes using the Fedora cross toolchains.
I have verified the x86_64 and ppc64 changes still run.
 2016-08-17 14:06:03 -05:00
Paul E. Murphy
cad1d6066f Remove tacit double usage in ldbl-128 
There is quiet truncation to double arithmetic in several
files.  I noticed them when building ldbl-128 in a
soft-fp context.  This did not change any test results.
 2016-08-03 11:01:25 -05:00
Aurelien Jarno
bdf20beac1 sparc64: add a VIS3 version of ceil, floor and trunc 
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.

sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.

Changelog:
	* sysdeps/ieee754/dbl-64/s_trunc.c: Avoid alias renamed.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise.
	* sysdeps/ieee754/flt-32/s_truncf.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
	[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
	Add s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
	s_truncf-vis3, s_trunc-vis3.
	(CFLAGS-s_ceilf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
	(CFLAGS-s_ceil-vis3.c): Likewise.
	(CFLAGS-s_floorf-vis3.c): Likewise.
	(CFLAGS-s_floor-vis3.c): Likewise.
	(CFLAGS-s_truncf-vis3.c): Likewise.
	(CFLAGS-s_trunc-vis3.c): Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.c: New file.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.c: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
 2016-08-03 13:35:22 +02:00
Siddhesh Poyarekar
cbf88869ed Fix cos computation for multiple precision fallback (bz #20357) 
During the sincos consolidation I made two mistakes, one was a logical
error due to which cos(0x1.8475e5afd4481p+0) returned
sin(0x1.8475e5afd4481p+0) instead.

The second issue was an error in negating inputs for the correct
quadrants for sine.  I could not find a suitable test case for this
despite running a program to search for such an input for a couple of
hours.

Following patch fixes both issues.  Tested on x86_64.  Thanks to Matt
Clay for identifying the issue.

	[BZ #20357]
	* sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition
	to call __mpsin/__mpcos and to negate values.
	* math/auto-libm-test-in: Add test.
	* math/auto-libm-test-out: Regenerate.
 2016-07-18 22:33:09 +05:30
Rajalakshmi Srinivasaraghavan
41a359e22f Add nextup and nextdown math functions 
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it.  This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.

The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity.  These are currently enabled
as GNU extensions.
 2016-06-16 21:37:45 +05:30
Joseph Myers
a2ae1696f7 Fix dbl-64 atan2 (sNaN, qNaN) (bug 20252). 
The dbl-64 implementation of atan2, passed arguments (sNaN, qNaN),
fails to raise the "invalid" exception.  This patch fixes it to add
both arguments, rather than just adding the second argument to itself,
in the case where the second argument is a NaN (which is checked for
before checking for the first argument being a NaN).  sNaN tests for
atan2 are added, along with some qNaN tests I noticed were missing but
should have been there by analogy with other tests present.

Tested for x86_64 and x86.

	[BZ #20252]
	* sysdeps/ieee754/dbl-64/e_atan2.c (__ieee754_atan2): Add both
	arguments when second argument is a NaN.
	* math/libm-test.inc (atan2_test_data): Add sNaN tests and more
	qNaN tests.
 2016-06-13 21:43:22 +00:00
Joseph Myers
88283451b2 Fix frexp (NaN) (bug 20250). 
Various implementations of frexp functions return sNaN for sNaN
input.  This patch fixes them to add such arguments to themselves so
that qNaN is returned.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #20250]
	* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Add non-finite input to
	itself.
	* sysdeps/ieee754/dbl-64/s_frexp.c (__frexp): Add non-finite or
	zero input to itself.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c (__frexp):
	Likewise.
	* sysdeps/ieee754/flt-32/s_frexpf.c (__frexpf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Likewise.
	* sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise.
	* math/libm-test.inc (frexp_test_data): Add sNaN tests.
 2016-06-13 17:27:19 +00:00
Joseph Myers
b7519f61fe Fix ldbl-128ibm log1pl (sNaN) (bug 20234). 
The ldbl-128ibm version of log1pl returns sNaN for sNaN input.  This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.

Tested for powerpc.

	[BZ #20234]
	* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Add positive
	infinity or NaN input to itself.
 2016-06-09 17:25:54 +00:00
Joseph Myers
f8fc4b4494 Fix ldbl-128ibm expm1l (sNaN) (bug 20233). 
The ldbl-128ibm version of expm1l returns sNaN for sNaN input.  This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.

Tested for powerpc.

	[BZ #20233]
	* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Add NaN input
	to itself.
 2016-06-09 17:24:52 +00:00
Joseph Myers
59e53a7898 Fix ldbl-128 expm1l (sNaN) (bug 20232). 
The ldbl-128 version of expm1l returns sNaN for sNaN input.  This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.

Tested for mips64.

	[BZ #20232]
	* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Add NaN input to
	itself.
 2016-06-09 17:23:51 +00:00
Joseph Myers
3d8b06bc61 Fix dbl-64 asin (sNaN) (bug 20213). 
The dbl-64 version of asin returns sNaN for sNaN arguments.  This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.

Tested for x86_64 and x86.

	[BZ #20213]
	* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Add NaN
	argument to itself.
	* math/libm-test.inc (asin_test_data): Add sNaN tests.
 2016-06-06 22:21:11 +00:00
Joseph Myers
af0cfbaf1d Fix dbl-64 acos (sNaN) (bug 20212). 
The dbl-64 version of acos returns sNaN for sNaN arguments.  This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.

Tested for x86_64 and x86.

	[BZ #20212]
	* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_acos): Add NaN
	argument to itself.
	* math/libm-test.inc (acos_test_data): Add sNaN tests.
 2016-06-06 22:10:11 +00:00
Joseph Myers
bba1419589 Fix ldbl-128ibm ceill, rintl etc. for sNaN arguments (bug 20156). 
The ldbl-128ibm implementations of ceill, floorl, roundl, truncl,
rintl and nearbyintl wrongly return an sNaN when given an sNaN
argument.  This patch fixes them to add such an argument to itself to
turn it into a quiet NaN.  (The code structure means this "else" case
applies to any argument which is zero or not finite; it's OK to do
this in all such cases.)

Tested for powerpc.

	[BZ #20156]
	* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Add high part
	to itself when zero or not finite.
	* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_rintl.c (__rintl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise.
 2016-05-27 13:59:24 +00:00
Joseph Myers
98c9c9d9ca Fix ldbl-128ibm sqrtl (sNaN) (bug 20153). 
The ldbl-128ibm implementation of sqrtl wrongly returns an sNaN for
signaling NaN arguments.  This patch fixes it to quiet its argument,
using the same x * x + x return for infinities and NaNs as the dbl-64
implementation uses to ensure that +Inf maps to +Inf while -Inf and
NaN map to NaN.

Tested for powerpc.

	[BZ #20153]
	* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c (__ieee754_sqrtl): Return
	x * x + x for infinities and NaNs.
 2016-05-26 22:58:36 +00:00
Joseph Myers
d73e7bdb3a Fix ldbl-128 j0l, j1l, y0l, y1l for sNaN argument (bug 20151). 
The ldbl-128 implementations of j0l, j1l, y0l, y1l (also used for
ldbl-128ibm) return an sNaN argument unchanged.  This patch fixes them
to add a NaN argument to itself to quiet it before return.

Tested for mips64.

	[BZ #20151]
	* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Add NaN
	argument to itself before returning result.
	(__ieee754_y0l): Likewise.
	* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Likewise.
	(__ieee754_y1l).
 2016-05-26 20:55:03 +00:00
Joseph Myers
078d1cf8ac Do not raise "inexact" from generic round (bug 15479). 
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments.  TS 18661-1
requires that this exception not be raised by these functions.  This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.

The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised.  This patch removes it for round
functions to align them with TS 18661-1 in this regard.  The tests
*are* updated by this patch; there are fewer architecture-specific
versions than for ceil and floor, and I fixed the powerpc ones some
time ago.  If any others still have the issue, as shown by tests for
round failing with spurious exceptions, they can be fixed separately
by architecture maintainers or others.

Tested for x86_64, x86 and mips64.

	[BZ #15479]
	* sysdeps/ieee754/dbl-64/s_round.c (huge): Remove variable.
	(__round): Do not force "inexact" exception.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c (huge): Remove
	variable.
	(__round): Do not force "inexact" exception.
	* sysdeps/ieee754/flt-32/s_roundf.c (huge): Remove variable.
	(__roundf): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-128/s_roundl.c (huge): Remove variable.
	(__roundl): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Remove variable.
	(__roundl): Do not force "inexact" exception.
	* math/libm-test.inc (round_test_data): Do not allow spurious
	"inexact" exceptions.
 2016-05-24 17:46:55 +00:00
Joseph Myers
876c5bd30c Do not raise "inexact" from generic floor (bug 15479). 
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments.  TS 18661-1
requires that this exception not be raised by these functions.  This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.

The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised.  This patch removes it for floor
functions to align them with TS 18661-1 in this regard.  Note that
some architecture-specific versions may still raise "inexact", so the
tests are not updated and the bug is not yet fixed.

Tested for x86_64, x86 and mips64.

	[BZ #15479]
	* sysdeps/ieee754/dbl-64/s_floor.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__floor): Do not force "inexact" exception.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Do not mention
	"inexact" exception in comment.
	(huge): Remove variable.
	(__floor): Do not force "inexact" exception.
	* sysdeps/ieee754/flt-32/s_floorf.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__floorf): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-128/s_floorl.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__floorl): Do not force "inexact" exception.
 2016-05-24 17:44:46 +00:00
Joseph Myers
ac2cc6f021 Do not raise "inexact" from generic ceil (bug 15479). 
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments.  TS 18661-1
requires that this exception not be raised by these functions.  This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.

The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised.  This patch removes it for ceil
functions to align them with TS 18661-1 in this regard.  Note that
some architecture-specific versions may still raise "inexact", so the
tests are not updated and the bug is not yet fixed.

Tested for x86_64, x86 and mips64.

	[BZ #15479]
	* sysdeps/ieee754/dbl-64/s_ceil.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__ceil): Do not force "inexact" exception.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Do not mention
	"inexact" exception in comment.
	(huge): Remove variable.
	(__ceil): Do not force "inexact" exception.
	* sysdeps/ieee754/flt-32/s_ceilf.c (huge): Remove variable.
	(__ceilf): Do not force "inexact" exception.
	* sysdeps/ieee754/ldbl-128/s_ceill.c: Do not mention "inexact"
	exception in comment.
	(huge): Remove variable.
	(__ceill): Do not force "inexact" exception.
 2016-05-24 17:42:10 +00:00
Joseph Myers
ffe9aaf2b9 Implement proper fmal for ldbl-128ibm (bug 13304). 
ldbl-128ibm had an implementation of fmal that just did (x * y) + z in
most cases, with no attempt at actually being a fused operation.

This patch replaces it with a genuine fused operation.  It is not
necessarily correctly rounding, but should produce a result at least
as accurate as the long double arithmetic operations in libgcc, which
I think is all that can reasonably be expected for such a non-IEEE
format where arithmetic is approximate rather than rounded according
to any particular rule for determining the exact result.  Like the
libgcc arithmetic, it may produce spurious overflow and underflow
results, and it falls back to the libgcc multiplication in the case of
(finite, finite, zero).

This concludes the fixes for bug 13304; any subsequently found fma
issues should go in separate Bugzilla bugs.  Various other pieces of
bug 13304 were fixed in past releases over the past several years.

Tested for powerpc.

	[BZ #13304]
	* sysdeps/ieee754/ldbl-128ibm/s_fmal.c: Include <fenv.h>,
	<float.h>, <math_private.h> and <stdlib.h>.
	(add_split): New function.
	(mul_split): Likewise.
	(ext_val): New typedef.
	(store_ext_val): New function.
	(mul_ext_val): New function.
	(compare): New function.
	(add_split_ext): New function.
	(__fmal): After checking for Inf, NaN and zero, compute result as
	an exact sum of scaled double values in round-to-nearest before
	adding those up and adjusting for other rounding modes.
	* math/auto-libm-test-in: Remove xfail-rounding:ldbl-128ibm from
	tests of fma.
	* math/auto-libm-test-out: Regenerated.
 2016-05-19 20:10:56 +00:00
Paul E. Murphy
37a4c70bd4 Increase internal precision of ldbl-128ibm decimal printf [BZ #19853] 
When the signs differ, the precision of the conversion sometimes
drops below 106 bits.  This strategy is identical to the
hexadecimal variant.

I've refactored tst-sprintf3 to enable testing a value with more
than 30 significant digits in order to demonstrate this failure
and its solution.

Additionally, this implicitly fixes a typo in the shift
quantities when subtracting from the high mantissa to compute
the difference.
 2016-03-31 12:14:33 -05:00
Joseph Myers
613c92b3b5 Fix ldbl-128ibm nearbyintl in non-default rounding modes (bug 19790). 
The ldbl-128ibm implementation of nearbyintl uses logic that only
works in round-to-nearest mode.  This contrasts with rintl, which
works in all rounding modes.

Now, arguably nearbyintl could simply be aliased to rintl, given that
spurious "inexact" is generally allowed for ldbl-128ibm, even for the
underlying arithmetic operations.  But given that the only point of
nearbyintl is to avoid "inexact", this patch follows the more
conservative approach of adding conditionals to the rintl
implementation to make it suitable for use to implement nearbyintl,
then builds it for nearbyintl with USE_AS_NEARBYINTL defined.  The
test test-nearbyint-except-2 shows up issues when traps on "inexact"
are enabled, which turn out to be problems with the powerpc
fenv_private.h implementation (two functions that should disable
exception traps potentially failing to do so in some cases); this
patch duly fixes that as well (I don't see any other existing cases
where this would be user-visible; there isn't much use of *_NOEX,
*hold* etc. in libm that requires exceptions to be discarded and not
trapped on).

Tested for powerpc.

	[BZ #19790]
	* sysdeps/ieee754/ldbl-128ibm/s_rintl.c [USE_AS_NEARBYINTL]
	(rintl): Define as macro.
	[USE_AS_NEARBYINTL] (__rintl): Likewise.
	(__rintl) [USE_AS_NEARBYINTL]: Use SET_RESTORE_ROUND_NOEX instead
	of fesetround.  Ensure results are evaluated before end of scope.
	* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Define
	USE_AS_NEARBYINTL and include s_rintl.c.
	* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc):
	Disable exception traps in new environment.
	(libc_feholdsetround_ppc_ctx): Likewise.
 2016-03-09 00:30:59 +00:00
Joseph Myers
cc4084017e Fix ldbl-128ibm remainderl equality test for zero low part (bug 19677). 
The ldbl-128ibm implementation of remainderl has logic resulting in
incorrect tests for equality of the absolute values of the arguments
in the case of zero low parts.  If the low parts are both zero but
with different signs, this can wrongly cause equal arguments to be
treated as different, resulting in turn in incorrect signs of zero
result in nondefault rounding modes arising from the subtractions done
when the arguments are not equal.

This patch fixes the logic to convert -0 low parts into +0 before the
comparison (remquo already has separate logic to deal with signs of
zero results, so doesn't need such a change).  Tests are added for
remainderl and remquol similar to that for fmodl, and based on a
refactoring of it, since the bug depends on low parts which should not
be relied upon in tests not setting the representation explicitly
(although in fact the bug shows up in test-ldouble with current GCC).
Tested for powerpc.

	[BZ #19677]
	* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
	(__ieee754_remainderl): Put zero low parts in canonical form.
	* sysdeps/ieee754/ldbl-128ibm/test-fmodrem-ldbl-128ibm.c: New
	file.  Based on
	sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c.
	* sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: Replace
	with wrapper round test-fmodrem-ldbl-128ibm.c.
	* sysdeps/ieee754/ldbl-128ibm/test-remainderl-ldbl-128ibm.c: New
	file.
	* sysdeps/ieee754/ldbl-128ibm/test-remquol-ldbl-128ibm.c:
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
	test-remainderl-ldbl-128ibm and test-remquol-ldbl-128ibm.
 2016-03-08 00:27:21 +00:00
Joseph Myers
7b428e744b Fix ldbl-128ibm nextafterl, nexttowardl sign of zero result (bug 19678). 
The ldbl-128ibm implementation of nextafterl / nexttowardl returns -0
in FE_DOWNWARD mode when taking the next value below the least
positive subnormal, when it should return +0.  This patch fixes it to
check explicitly for this case.

Tested for powerpc.

	[BZ #19678]
	* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
	Ensure +0.0 is returned when taking the next value below the least
	positive value.
 2016-02-19 17:19:53 +00:00
Joseph Myers
c091488e51 Fix ldbl-128ibm powl overflow handling (bug 19674). 
The ldbl-128ibm implementation of powl has some problems in the case
of overflow or underflow, which are mainly visible in non-default
rounding modes.

* When overflow or underflow is detected early, the correct sign of an
  overflowing or underflowing result is not allowed for.  This is
  mostly hidden in the default rounding mode by the errno-setting
  wrappers recomputing the result (except in non-default
  error-handling modes such as -lieee), but visible in other rounding
  modes where a result that is not zero or infinity causes the
  wrappers not to do the recomputation.

* The final scaling is done before the sign is incorporated in the
  result, but should be done afterwards for correct overflowing and
  underflowing results in directed rounding modes.

This patch fixes those problems.  Tested for powerpc.

	[BZ #19674]
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Include
	sign in overflowing and underflowing results when overflow or
	underflow is detected early.  Include sign in result before rather
	than after scaling.
 2016-02-19 01:07:40 +00:00
Joseph Myers
9120a57f48 Fix ldbl-128ibm remainderl, remquol equality tests (bug 19603). 
The ldbl-128ibm implementations of remainderl and remquol have logic
resulting in incorrect tests for equality of the absolute values of
the arguments.  Equality is tested based on the integer
representations of the high and low parts, with the sign bit masked
off the high part - but when this changes the sign of the high part,
the sign of the low part needs to be changed as well, and failure to
do this means arguments are wrongly treated as equal when they are
not.

This patch fixes the logic to adjust signs of low parts as needed.
Tested for powerpc.

	[BZ #19603]
	* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
	(__ieee754_remainderl): Adjust sign of integer version of low part
	when taking absolute value of high part.
	* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
	* math/libm-test.inc (remainder_test_data): Add another test.
	(remquo_test_data): Likewise.
 2016-02-19 00:55:46 +00:00
Joseph Myers
0fed79a827 Fix ldbl-128ibm fmodl handling of equal arguments with low part zero (bug 19602). 
The ldbl-128ibm implementation of fmodl has logic to detect when the
first argument has absolute value less than or equal to the second.
This logic is only correct for nonzero low parts; if the high parts
are equal and the low parts are zero, then the signs of the low parts
(which have no semantic effect on the value of the long double number)
can result in equal values being wrongly treated as unequal, and an
incorrect result being returned from fmodl.  This patch fixes this by
checking for the case of zero low parts.

Although this does show up in tests from libm-test.inc (both tests of
fmodl, and, indirectly, of remainderl / dreml), the dependence on
non-semantic zero low parts means that test shouldn't be expected to
reproduce it reliably; thus, this patch adds a standalone test that
sets up affected values using unions.

Tested for powerpc.

	[BZ #19602]
	* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Handle
	equal high parts and both low parts zero specially.
	* sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: New test.
	* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
	Add test-fmodl-ldbl-128ibm.
 2016-02-18 22:54:07 +00:00
Joseph Myers
e2c631384a Fix ldbl-128ibm fmodl handling of subnormal results (bug 19595). 
The ldbl-128ibm implementation of fmodl has completely bogus logic for
subnormal results (in this context, that means results for which the
result is in the subnormal range for double, not results with absolute
value below LDBL_MIN), based on code used for ldbl-128 that is correct
in that case but incorrect in the ldbl-128ibm use.  This patch fixes
it to convert the mantissa into the correct form expected by
ldbl_insert_mantissa, removing the other cases of the code that were
incorrect and in one case unreachable for ldbl-128ibm.  A correct
exponent value is then passed to ldbl_insert_mantissa to reflect the
shifted result.

Tested for powerpc.

	[BZ #19595]
	* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Use
	common logic for all cases of shifting subnormal results.  Do not
	insert sign bit in shifted mantissa.  Always pass -1023 as biased
	exponent to ldbl_insert_mantissa in subnormal case.
 2016-02-18 22:42:06 +00:00
Joseph Myers
b9a76339be Fix ldbl-128ibm roundl for non-default rounding modes (bug 19594). 
The ldbl-128ibm implementation of roundl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases).  This patch reimplements it along
the lines used for floorl, ceill and truncl, using __round on the high
part, and on the low part if the high part is an integer, and then
adjusting in the cases where this is incorrect.

Tested for powerpc.

	[BZ #19594]
	* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Use __round
	on high and low parts then adjust result and use
	ldbl_canonicalize_int if needed.
 2016-02-18 22:24:32 +00:00
Joseph Myers
e2310a27be Fix ldbl-128ibm truncl for non-default rounding modes (bug 19593). 
The ldbl-128ibm implementation of truncl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases).  It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of trunc, when it seems more
natural to take the truncation of the high part (__trunc optimized
inline versions can be used), and the floor or ceiling of the low part
(depending on the sign of the high part) if the high part is an
integer, as was done for floorl and ceill.  This patch makes it use
that simpler approach.

Tested for powerpc.

	[BZ #19593]
	* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Use __trunc
	on high part and __floor or __ceil on low part then use
	ldbl_canonicalize_int if needed.
 2016-02-18 21:52:07 +00:00
Joseph Myers
8a9fa0086d Fix ldbl-128ibm ceill for non-default rounding modes (bug 19592). 
The ldbl-128ibm implementation of ceill is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases).  It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of ceil, when it seems more
natural to take the ceiling of the high part (__ceil optimized inline
versions can be used), and that of the low part if the high part is an
integer, as was done for floorl.  This patch makes it use that simpler
approach.

Tested for powerpc.

	[BZ #19592]
	* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Use __ceil on
	high and low parts then use ldbl_canonicalize_int if needed.
 2016-02-18 21:40:39 +00:00
Joseph Myers
1833769e19 Fix ldbl-128ibm floorl for non-default rounding modes (bug 17899). 
The ldbl-128ibm implementation of floorl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases going beyond the incorrect signs of
zero results noted in bug 17899).  It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of floor, when it seems more
natural to take the floor of the high part (__floor optimized inline
versions can be used), and that of the low part if the high part is an
integer.  This patch makes it use that simpler approach, with a
canonicalization that works in all rounding modes (given that the only
way the result can be noncanonical is if taking the floor of a
negative noninteger low part increased its exponent).

Tested for powerpc, where over a thousand failures are removed from
test-ldouble.out (floorl problems affect many powl tests).

	[BZ #17899]
	* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int):
	New function.
	* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Use __floor
	on high and low parts then use ldbl_canonicalize_int if needed.
 2016-02-18 21:31:10 +00:00
Andreas Schwab
4fb66fac3a Remove unused variables 
They are flagged by -Wunused-const-variable.
 2016-01-27 09:30:16 +01:00
Joseph Myers
dcb133b7a4 Fix __finitel libm compat symbol version. 
The changes to restrict implementation-namespace symbol aliases such
as __finitel to compat symbols used code for __finitel in libm
analogous to that for __finitel in libc.  However, the versions for
the two symbols are actually different, GLIBC_2.0 in libc and
GLIBC_2.1 in libm.  This patch fixes the handling of the libm compat
symbol.

Tested for mips (o32), where it fixes an ABI test failure.

	* sysdeps/ieee754/dbl-64/s_finite.c
	[NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Define
	compat symbol at version GLIBC_2_1 and use GLIBC_2_1 in
	SHLIB_COMPAT condition for libm, not GLIBC_2_0.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c
	[NO_LONG_DOUBLE && LDBL_CLASSIFY_COMPAT] (__finitel): Likewise.
 2016-01-20 19:04:43 +00:00
Stefan Liebler
c4d17461e0 S/390: Do not raise inexact exception in lrint/lround. [BZ #19486] 
I get some math test-failures on s390 for float/double/ldouble for
various lrint/lround functions like:
lrint (0x1p64): Exception "Inexact" set
lrint (-0x1p64): Exception "Inexact" set
lround (0x1p64): Exception "Inexact" set
lround (-0x1p64): Exception "Inexact" set
...

GCC emits "convert to fixed" instructions for casting floating point
values to integer values. These instructions raise invalid and inexact
exceptions if the floating point value exceeds the integer type ranges.

This patch enables the various FIX_DBL_LONG_CONVERT_OVERFLOW macros in
order to avoid a cast from floating point to integer type and raise the
invalid exception with feraiseexcept.
The ldbl-128 rint/round functions are now using the same logic.

ChangeLog:

	[BZ #19486]
	* sysdeps/s390/fix-fp-int-convert-overflow.h: New File.
	* sysdeps/generic/fix-fp-int-convert-overflow.h
	(FIX_LDBL_LONG_CONVERT_OVERFLOW,
	FIX_LDBL_LLONG_CONVERT_OVERFLOW): New define.
	* sysdeps/arm/fix-fp-int-convert-overflow.h: Likewise.
	* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h:
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl):
	Avoid conversions to long int where inexact exceptions
	could be raised.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl):
	Avoid conversions to long long int where inexact exceptions
	could be raised.
	* sysdeps/ieee754/ldbl-128/s_llroundl.c (__llroundl):
	Likewise.
 2016-01-18 12:48:06 +01:00
H.J. Lu
09245377da Call math_opt_barrier inside if 
Since floating-point operation may trigger floating-point exceptions,
we call math_opt_barrier inside if to prevent code motion.

	[BZ #19465]
	* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Call math_opt_barrier
	inside if.
	* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fma.c (__fma): Likewise.
	* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
 2016-01-15 05:23:20 -08:00
Anton Blanchard
0a1f1e78fb Eliminate redundant sign extensions in pow() 
When looking at the code generated for pow() on ppc64 I noticed quite
a few sign extensions. Making the array indices unsigned reduces the
number of sign extensions from 24 to 7.

Tested for powerpc64le and x86_64.
 2016-01-04 14:55:38 -02:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Siddhesh Poyarekar
b300455644 Consolidate sincos computation for 2.426265 < |x| < 105414350 
Like the previous change, exploit the fact that computation for sin
and cos is identical except that it is apart by a quadrant.  Also
remove csloww, csloww1 and csloww2 since they can easily be expressed
in terms of sloww, sloww1 and sloww2.
 2015-12-21 10:43:04 +05:30
Siddhesh Poyarekar
f7953c44d5 Consolidate sin and cos code for 105414350 <|x|< 281474976710656 
The sin and cos computation for this range of input is identical
except for a difference in quadrants by 1.  Exploit that fact and the
common argument reduction to reduce computations for sincos.
 2015-12-21 10:41:46 +05:30
Siddhesh Poyarekar
a045832deb Consolidate range reduction in sincos for x > 281474976710656 
Range reduction needs to be done only once for sin and cos, so copy
over all of the relevant functions (__sin, __cos, reduce_and_compute)
and consolidate common code.
 2015-12-21 10:40:32 +05:30
Steve Ellcey
976ef87054 Fix indentation. 
* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
	Fix indentation.
 2015-12-11 09:19:37 -08:00
Joseph Myers
e6a6b1c3de Fix ldbl-128ibm logl inaccuracy near 1 (bug 19351). 
The ldbl-128ibm implementation of logl is inaccurate for arguments
near 1, because when deciding whether to bypass a series expansion for
log(1+z), where z = x-1, it compares the square of z rather than z
itself with an epsilon value.  This patch fixes that comparison, so
eliminating the test failures for inaccuracy of logl in such cases.

Tested for powerpc.

	[BZ #19351]
	* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): When
	expanding log(1+z), compare z rather than its square with epsilon
	to determine when to avoid evaluating the expansion.
 2015-12-09 23:51:11 +00:00
Joseph Myers
f517e06ab7 Fix ldbl-128ibm sinhl spurious overflows (bug 19350). 
The ldbl-128ibm implementation of sinhl uses a slightly too small
overflow threshold (similar to bug 16407 for coshl).  This patch fixes
it to use a safe threshold (so that values whose high part is above
the value compared with definitely result in an overflow in all
rounding modes).

Tested for powerpc.

	[BZ #19350]
	* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl):
	Increase overflow threshold.
 2015-12-09 22:37:08 +00:00
Joseph Myers
ca2fcac629 Fix ldbl-128ibm tanhl inaccuracy for small arguments (bug 19349). 
The ldbl-128ibm implementation of tanhl is inaccurate for small
arguments, because it returns x*(1+x) (maybe in an attempt to raise
"inexact") when x itself would be the accurate return value but
multiplying by 1+x introduces large errors.  This patch fixes it to
return x in that case (when the mathematical result is x plus a
negligible remainder on the order of x^3) to avoid those errors.

Tested for powerpc.

	[BZ #19349]
	* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Return argument
	when small.
 2015-12-09 21:20:18 +00:00
Chris Metcalf
e59c94fa0e math: add LDBL_CLASSIFY_COMPAT support 
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.

To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors.  However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.

For tile, remove the now-unnecessary exports of those functions from
libc and libm.
 2015-12-03 13:00:46 -05:00
Joseph Myers
60f435bb0c Use hex float constants in sysdeps/ieee754/dbl-64/e_sqrt.c. 
Various sysdeps/ieee754/dbl-64 functions use double constants defined
using a union between a double and two ints, with separate big-endian
and little-endian definitions of the constants.

With modern C, this is unnecessary complication; hex float constants
(or __builtin_inf etc.) suffice to specify the exact value desired,
and so can avoid separate versions for each endianness.  Having this
complication also complicates cleanups such as removing slow paths
from these library functions, as they need to make sure to remove both
copies of variables that are no longer used after such a cleanup (and
in at least one case, proper removal of a slow path will also involve
removing slow-path-only values from the middle of an array - an array
with both big-endian and little-endian copies - and adjusting other
references to that array).

So it makes sense to clean up the code to define these constants using
hex floats and so eliminate the endianness conditional.  This patch
does so in the case of sqrt, where the two constants are such that it
makes sense just to put them directly in the code using them and
eliminate the names for them altogether.

Tested for arm (the code generated for sqrt does change, though not in
any significant way).

	* sysdeps/ieee754/dbl-64/e_sqrt.c: Do not include uroot.h.
	(__ieee754_sqrt): Use hex float constants instead of tm256.x and
	t512.x.
	* sysdeps/ieee754/dbl-64/uroot.h: Remove file.
 2015-12-01 01:01:36 +00:00
Joseph Myers
e02cabecf0 Refactor strtod parsing of NaN payloads. 
The nan* functions handle their string argument by constructing a
NAN(...) string on the stack as a VLA and passing it to strtod
functions.

This approach has problems discussed in bug 16961 and bug 16962: the
stack usage is unbounded, and it gives incorrect results in certain
cases where the argument is not a valid n-char-sequence.

The natural fix for both issues is to refactor the NaN payload parsing
out of strtod into a separate function that the nan* functions can
call directly, so that no temporary string needs constructing on the
stack at all.  This patch does that refactoring in preparation for
fixing those bugs (but without actually using the new functions from
nan* - which will also require exporting them from libc at version
GLIBC_PRIVATE).  This patch is not intended to change any user-visible
behavior, so no tests are added (fixes for the above bugs will of
course add tests for them).

This patch builds on my recent fixes for strtol and strtod issues in
Turkish locales.  Given those fixes, the parsing of NaN payloads is
locale-independent; thus, the new functions do not need to take a
locale_t argument.

Tested for x86_64, x86, mips64 and powerpc.

	* stdlib/strtod_nan.c: New file.
	* stdlib/strtod_nan_double.h: Likewise.
	* stdlib/strtod_nan_float.h: Likewise.
	* stdlib/strtod_nan_main.c: Likewise.
	* stdlib/strtod_nan_narrow.h: Likewise.
	* stdlib/strtod_nan_wide.h: Likewise.
	* stdlib/strtof_nan.c: Likewise.
	* stdlib/strtold_nan.c: Likewise.
	* sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise.
	* sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise.
	* wcsmbs/wcstod_nan.c: Likewise.
	* wcsmbs/wcstof_nan.c: Likewise.
	* wcsmbs/wcstold_nan.c: Likewise.
	* stdlib/Makefile (routines): Add strtof_nan, strtod_nan and
	strtold_nan.
	* wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and
	wcstof_nan.
	* include/stdlib.h (__strtof_nan): Declare and use
	libc_hidden_proto.
	(__strtod_nan): Likewise.
	(__strtold_nan): Likewise.
	(__wcstof_nan): Likewise.
	(__wcstod_nan): Likewise.
	(__wcstold_nan): Likewise.
	* include/wchar.h (____wcstoull_l_internal): Declare.
	* stdlib/strtod_l.c: Do not include <ieee754.h>.
	(____strtoull_l_internal): Remove declaration.
	(STRTOF_NAN): Define macro.
	(SET_MANTISSA): Remove macro.
	(STRTOULL): Likewise.
	(____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload.
	* stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration.
	(STRTOF_NAN): Define macro.
	(SET_MANTISSA): Remove macro.
	* sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro.
	(SET_MANTISSA): Remove macro.
	* sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define
	macro.
	(SET_MANTISSA): Remove macro.
	* sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define
	macro.
	(SET_MANTISSA): Remove macro.
	* sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro.
	(SET_MANTISSA): Remove macro.
	* wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration.
	* wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise.
	* wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
 2015-11-24 22:24:52 +00:00
Joseph Myers
d709042a6e Fix lgamma setting signgam for ISO C (bug 15421). 
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.

Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.

This patch implements that approach for the fix.  signgam is made into
a weak alias.  The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.

When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily.  When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam.  The
ldbl-opt versions are updated accordingly.

The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions.  Similar changes are made to the ia64 versions (untested).

Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking.  The conformtest whitelist entry is removed as well.

Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases.  Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.

	[BZ #15421]
	* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
	initialize with 0 and define as weak alias of __signgam.
	* include/math.h [!_ISOMAC] (__signgam): Declare.
	* math/Makefile (libm-calls): Add w_lgamma_compat.
	(tests): Add test-signgam-uchar, test-signgam-uchar-init,
	test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
	test-signgam-ullong-init.
	(tests-static): Add test-signgam-uchar-static,
	test-signgam-uchar-init-static, test-signgam-uint-static,
	test-signgam-uint-init-static, test-signgam-ullong-static and
	test-signgam-ullong-init-static.
	(CFLAGS-test-signgam-uchar.c): New variable.
	(CFLAGS-test-signgam-uchar-init.c): Likewise.
	(CFLAGS-test-signgam-uchar-static.c): Likewise.
	(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
	(CFLAGS-test-signgam-uint.c): Likewise.
	(CFLAGS-test-signgam-uint-init.c): Likewise.
	(CFLAGS-test-signgam-uint-static.c): Likewise.
	(CFLAGS-test-signgam-uint-init-static.c): Likewise.
	(CFLAGS-test-signgam-ullong.c): Likewise.
	(CFLAGS-test-signgam-ullong-init.c): Likewise.
	(CFLAGS-test-signgam-ullong-static.c): Likewise.
	(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
	* math/Versions (libm): Add GLIBC_2.23.
	* math/lgamma-compat.h: New file.
	* math/test-signgam-main.c: Likewise.
	* math/test-signgam-uchar-init-static.c: Likewise.
	* math/test-signgam-uchar-init.c: Likewise.
	* math/test-signgam-uchar-static.c: Likewise.
	* math/test-signgam-uchar.c: Likewise.
	* math/test-signgam-uint-init-static.c: Likewise.
	* math/test-signgam-uint-init.c: Likewise.
	* math/test-signgam-uint-static.c: Likewise.
	* math/test-signgam-uint.c: Likewise.
	* math/test-signgam-ullong-init-static.c: Likewise.
	* math/test-signgam-ullong-init.c: Likewise.
	* math/test-signgam-ullong-static.c: Likewise.
	* math/test-signgam-ullong.c: Likewise.
	* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
	wrapper of w_lgamma_main.c.
	* math/w_lgamma_compat.c: New file.
	* math/w_lgamma_compatf.c: Likewise.
	* math/w_lgamma_compatl.c: Likewise.
	* math/w_lgamma_main.c: New file.  Based on w_lgamma.c.  Include
	<lgamma-compat.h>.  Condition contents on [BUILD_LGAMMA].  Support
	defining compatibility symbols.
	(__lgamma): Change to LGFUNC (__lgamma).  Use CALL_LGAMMA.
	* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
	wrapper of w_lgammaf_main.c.
	* math/w_lgammaf_main.c: New file.  Based on w_lgammaf.c.  Include
	<lgamma-compat.h>.  Condition contents on [BUILD_LGAMMA].  Support
	defining compatibility symbols.
	(__lgammaf): Change to LGFUNC (__lgammaf).  Use CALL_LGAMMA.
	* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
	wrapper of w_lgammal_main.c.
	* math/w_lgammal_main.c: New file.  Based on w_lgammal.c.  Include
	<lgamma-compat.h>.  Condition contents on [BUILD_LGAMMA].  Support
	defining compatibility symbols.
	(__lgammal): Change to LGFUNC (__lgammal).  Use CALL_LGAMMA.
	* sysdeps/ia64/fpu/lgamma-compat.h: New file.
	* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
	* sysdeps/ia64/fpu/w_lgamma_main.c: ...here.  Include
	<lgamma-compat.h>.
	(__ieee754_lgamma): Change to LGFUNC (lgamma).  Use CALL_LGAMMA.
	(__ieee754_gamma): Define as alias.
	* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
	* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here.  Include
	<lgamma-compat.h>.
	(__ieee754_lgammaf): Change to LGFUNC (lgammaf).  Use CALL_LGAMMA.
	(__ieee754_gammaf): Define as alias.
	* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
	* sysdeps/ia64/fpu/w_lgammal_main.c: ...here.  Include
	<lgamma-compat.h>.
	(__ieee754_lgammal): Change to LGFUNC (lgammal).  Use CALL_LGAMMA.
	(__ieee754_gammal): Define as alias.
	* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
	* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here.  Include
	<math/w_lgamma_compat.c>.
	[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
	Define as alias of __lgamma_compat and use in defining lgammal.
	* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
	* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here.  Include
	<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
	(USE_AS_COMPAT): New macro.
	(LGAMMA_OLD_VER): Undefine and redefine.
	(lgammal): Do not define here.
	(gammal): Only define here if [GAMMA_ALIAS].
	* conform/linknamespace.pl (@whitelist): Remove signgam.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2015-11-20 22:49:59 +00:00
Paul Murphy
79adcb58f6 Shuffle includes in ldbl-128ibm/mpn2ldl.c 
Kind of hokey, but errno.h drags in misc/sys/param.h which
defines MIN/MAX causing an error.  Include system headers
first to grab MIN/MAX definition in param.h, and define
HAVE_ALLOCA to preserve existing behavior.

	* sysdeps/ieee754/ldbl-128ibm/mpn2ldl.c: Include gmp headers
	after system headers to prevent MIN/MAX redefinition.  Define
	HAVE_ALLOCA to preserve builtin alloca usage.
 2015-11-19 15:52:43 -02:00
Siddhesh Poyarekar
463ac90dab Include s_sin.c in s_sincos.c 
Include the __sin and __cos functions as local static copies to allow
deper optimization of the functions.  This change shows an improvement
of about 17% in the min case and 12.5% in the mean case for the sincos
microbenchmark on x86_64.

	* sysdeps/ieee754/dbl-64/s_sin.c (__sin)[IN_SINCOS]: Mark function
	static and don't set or restore rounding.
	(__cos)[IN_SINCOS]: Likewise.
	* sysdeps/ieee754/dbl-64/s_sincos.c: Include s_sin.c.
	(__sincos): Set and restore rounding mode.  Remove check for infinite
	or NaN input.
 2015-11-17 21:11:31 +05:30
Siddhesh Poyarekar
b7665e5163 Remove redundant else clauses in s_sin.c 
Makes the code easier to read due to the reduced nesting.  The
generated binary is unchanged.
 2015-11-17 16:03:11 +05:30
Joseph Myers
909f8e14db Fix ldbl-128ibm strtold overflow handling (bug 14551). 
For ldbl-128ibm, if the result of strtold overflows in the final
conversion from MPN to IBM long double (because the exponent for a
106-bit IEEE result is 1023 but the high part would end up as
0x1p1024, which overflows), that conversion code fails to handle this
and produces an invalid long double value (high part infinite, low
part not zero) without raising exceptions or setting errno.  This
patch adds an explicit check for this case to ensure an appropriate
result is returned in a way that ensures the right exceptions are
raised, with errno set.

Tested for powerpc.

	[BZ #14551]
	* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: Include <errno.h>.
	(__mpn_construct_long_double): If high part overflows to infinity,
	set errno and recompute overflowed result of the correct sign.
	* sysdeps/ieee754/ldbl-128ibm/Makefile
	[$(subdir) = stdlib] (tests): Add tst-strtold-ldbl-128ibm.
	[$(subdir) = stdlib] ($(objpfx)tst-strtold-ldbl-128ibm): Depend on
	$(libm).
	* sysdeps/ieee754/ldbl-128ibm/tst-strtold-ldbl-128ibm.c: New file.
 2015-11-13 12:03:46 +00:00
Joseph Myers
444ec6b8d8 Fix dbl-64 remainder sign of zero result (bug 19201). 
For some large arguments, the dbl-64 implementation of remainder gives
zero results with the wrong sign, resulting from a subtraction that is
mathematically correct but does not guarantee that a zero result has
the sign of the first argument to remainder.  This patch adds an
appropriate check for this case, similar to other implementations of
remainder in the case of equality, and adds tests of remainder on
inputs already used to test remquo.

Tested for x86_64 and x86.

	[BZ #19201]
	* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder):
	Check for zero remainder in case of large exponents and ensure
	correct sign of result in that case.
	* math/libm-test.inc (remainder_test_data): Add more tests.
 2015-11-03 00:11:49 +00:00
Joseph Myers
85422c2acb Make nextafter, nexttoward set errno (bug 6799). 
nextafter and nexttoward fail to set errno on overflow and underflow.
This patch makes them do so in cases that should include all the cases
where such errno setting is required by glibc's goals for when to set
errno (but not all cases of underflow where the result is nonzero and
so glibc's goals do not require errno setting).

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #6799]
	* math/s_nextafter.c: Include <errno.h>.
	(__nextafter): Set errno on overflow and underflow.
	* math/s_nexttowardf.c: Include <errno.h>.
	(__nexttowardf): Set errno on overflow and underflow.
	* sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>.
	(__nextafterl): Set errno on overflow and underflow.
	* sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>.
	(__nexttoward): Set errno on overflow and underflow.
	* sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>.
	(__nexttowardf): Set errno on overflow and underflow.
	* sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>.
	(__nextafterf): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>.
	(__nextafterl): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>.
	(__nexttoward): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>.
	(__nexttowardf): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>.
	(__nextafterl): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>.
	(__nexttoward): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>.
	(__nexttowardf): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>.
	(__nexttoward): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>.
	(__nexttowardf): Set errno on overflow and underflow.
	* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>.
	(__nldbl_nexttowardf): Set errno on overflow and underflow.
	* sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>.
	(__nextafterl): Set errno on overflow and underflow.
	* math/libm-test.inc (nextafter_test_data): Do not allow errno
	setting to be missing on overflow.  Add more tests.
	(nexttoward_test_data): Likewise.
 2015-11-02 18:54:19 +00:00
Joseph Myers
af1b2fd083 Fix ldbl-128 log1pl (-qNaN) spurious "invalid" exception (bug 19189). 
The ldbl-128 version of log1pl raises a spurious "invalid" exception
for a -qNaN argument.  This patch fixes this by making the initial
check for infinities and NaNs handle arguments of both signs in such a
way that NaNs result in a NaN being returned (quietly if the input NaN
was quiet) while +Inf results in +Inf being returned and -Inf results
in a qNaN being returned with "invalid" exception raised.

Tested for mips64.

	[BZ #19189]
	* sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Make check for
	non-finite argument handle arguments with negative sign.
 2015-10-29 23:09:51 +00:00
Joseph Myers
5ce8f12506 Make drem an alias of remainder (bug 16171). 
The libm drem functions just call the corresponding __remainder
functions.  This patch removes the unnecessary wrappers by making them
into weak aliases at the ELF level.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16171]
	* math/w_remainder.c (drem): Define as weak alias of __remainder.
	[NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder.
	* math/w_remainderf.c (dremf): Define as weak alias of
	__remainderf.
	* math/w_remainderl.c (dreml): Define as weak alias of
	__remainderl.
	* sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of
	__remainder.
	* sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of
	__remainderf.
	* sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of
	__remainderl.
	* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as
	weak alias of remainderl.
	* sysdeps/ieee754/ldbl-opt/w_remainder.c
	[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong
	alias of __remainder.
	[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol.
	* sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as
	strong alias of __remainderl.
	(dreml): Use long_double_symbol.
	* math/Makefile (libm-calls): Remove w_drem.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem.
	(CFLAGS-nldbl-drem.c): Remove variable.
	(CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml.
	* math/w_drem.c: Remove file.
	* math/w_dremf.c: Likewise.
	* math/w_dreml.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise.
	* sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
 2015-10-29 22:29:21 +00:00