Commit Graph

43 Commits

Author SHA1 Message Date
Noah Goldstein
7c8ca17893 x86: Add missing rtm tests for strcmp family
Add new tests for:
    strcasecmp
    strncasecmp
    strcmp
    wcscmp

These functions all have avx2_rtm implementations so should be tested.
2022-07-13 14:55:31 -07:00
Noah Goldstein
7835d611af x86: Test wcscmp RTM in the wcsncmp overflow case [BZ #28896]
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.

test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
2022-02-18 16:35:18 -06:00
Noah Goldstein
c627209832 x86: Fallback {str|wcs}cmp RTM in the ncmp overflow case [BZ #28896]
In the overflow fallback strncmp-avx2-rtm and wcsncmp-avx2-rtm would
call strcmp-avx2 and wcscmp-avx2 respectively. This would have
not checks around vzeroupper and would trigger spurious
aborts. This commit fixes that.

test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass on
AVX2 machines with and without RTM.

Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
2022-02-17 15:43:05 -06:00
Florian Weimer
990c953bce x86: Add x86-64-vN check to early startup
This ISA level covers the glibc build itself.  <dl-hwcap-check.h>
cannot be used because this check (by design) happens before
DL_PLATFORM_INIT and the x86 CPU flags initialization.

Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
2022-01-14 20:17:49 +01:00
Fangrui Song
224edada60 configure: Allow LD to be LLD 13.0.0 or above [BZ #26558]
When using LLD (LLVM linker) as the linker, configure prints a confusing
message.

    *** These critical programs are missing or too old: GNU ld

LLD>=13.0.0 can build glibc --enable-static-pie. (8.0.0 needs one
workaround for -Wl,-defsym=_begin=0. 9.0.0 works with
--disable-static-pie).

XFAIL two tests sysdeps/x86/tst-ifunc-isa-* which have the BZ #28154
issue (LLD follows the PowerPC port of GNU ld for ifunc by placing
IRELATIVE relocations in .rela.dyn, triggering a glibc ifunc fragility).

The set of dynamic symbols is the same with GNU ld and LLD,
modulo unused SHN_ABS version node symbols.

For comparison, gold does not support --enable-static-pie
yet (--no-dynamic-linker is unsupported BZ #22221), yet
has 6 failures more than LLD. gold linked libc.so has
larger .dynsym differences with GNU ld and LLD
(non-default version symbols are changed to default versions
by a version script BZ #28196).
2021-08-31 20:23:34 -07:00
H.J. Lu
7c124e3714 x86: Install <bits/platform/x86.h> [BZ #27958]
1. Install <bits/platform/x86.h> for <sys/platform/x86.h> which includes
<bits/platform/x86.h>.
2. Rename HAS_CPU_FEATURE to CPU_FEATURE_PRESENT which checks if the
processor has the feature.
3. Rename CPU_FEATURE_USABLE to CPU_FEATURE_ACTIVE which checks if the
feature is active.  There may be other preconditions, like sufficient
stack space or further setup for AMX, which must be satisfied before the
feature can be used.

This fixes BZ #27958.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-07-23 05:12:51 -07:00
Siddhesh Poyarekar
5b8d271571 Fix build and tests with --disable-tunables
Remove unused code and declare __libc_mallopt when !IS_IN (libc) to
allow the debug hook to build with --disable-tunables.

Also, run tst-ifunc-isa-2* tests only when tunables are enabled since
the result depends on it.

Tested on x86_64.

Reported-by: Matheus Castanho <msc@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-07-23 13:57:56 +05:30
Florian Weimer
6f1c701026 dlfcn: Cleanups after -ldl is no longer required
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c.  The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.

This commit adjusts the test suite not to use $(libdl).  The libdl.so
symbolic link is no longer installed.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-06-03 09:11:45 +02:00
H.J. Lu
4bd660be40 x86: Add string/memory function tests in RTM region
At function exit, AVX optimized string/memory functions have VZEROUPPER
which triggers RTM abort.   When such functions are called inside a
transactionally executing RTM region, RTM abort causes severe performance
degradation.  Add tests to verify that string/memory functions won't
cause RTM abort in RTM region.
2021-03-29 07:40:17 -07:00
Samuel Thibault
16b597807d elf: Fix not compiling ifunc tests that need gcc ifunc support 2021-03-24 01:52:46 +01:00
Siddhesh Poyarekar
941ea10f80 Build get-cpuid-feature-leaf.c without stack-protector [BZ #27555]
__x86_get_cpuid_feature_leaf is called during early startup, before
the stack check guard is initialized and is hence not safe to build
with stack-protector.

Additionally, IFUNC resolvers for static tst-ifunc-isa tests get
called too early for stack protector to be useful, so fix them to
disable stack protector for the resolver functions.

This fixes all failures seen with --enable-stack-protector=all
configuration.

Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-03-15 20:24:45 +05:30
H.J. Lu
f53ffc9b90 x86: Handle _SC_LEVEL1_ICACHE_LINESIZE [BZ #27444]
commit 2d651eb926
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Fri Sep 18 07:55:14 2020 -0700

    x86: Move x86 processor cache info to cpu_features

missed _SC_LEVEL1_ICACHE_LINESIZE.

1. Add level1_icache_linesize to struct cpu_features.
2. Initialize level1_icache_linesize by calling handle_intel,
handle_zhaoxin and handle_amd with _SC_LEVEL1_ICACHE_LINESIZE.
3. Return level1_icache_linesize for _SC_LEVEL1_ICACHE_LINESIZE.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-03-15 05:43:26 -07:00
H.J. Lu
5ab25c8875 x86: Add PTWRITE feature detection [BZ #27346]
1. Add CPUID_INDEX_14_ECX_0 for CPUID leaf 0x14 to detect PTWRITE feature
in EBX of CPUID leaf 0x14 with ECX == 0.
2. Add PTWRITE detection to CPU feature tests.
3. Add 2 static CPU feature tests.
2021-02-07 08:01:14 -08:00
H.J. Lu
04dff6fc0d x86: Properly set usable CET feature bits [BZ #26625]
commit 94cd37ebb2
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Wed Sep 16 05:27:32 2020 -0700

    x86: Use HAS_CPU_FEATURE with IBT and SHSTK [BZ #26625]

broke

GLIBC_TUNABLES=glibc.cpu.hwcaps=-IBT,-SHSTK

since it can no longer disable IBT nor SHSTK.  Handle IBT and SHSTK with:

1. Revert commit 94cd37ebb2.
2. Clears the usable CET feature bits if kernel doesn't support CET.
3. Add GLIBC_TUNABLES tests without dlopen.
4. Add tests to verify that CPU_FEATURE_USABLE on IBT and SHSTK matches
_get_ssp.
5. Update GLIBC_TUNABLES tests with dlopen to verify that CET is disabled
with GLIBC_TUNABLES.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-01-29 03:58:11 -08:00
H.J. Lu
7a5ab88e21 x86: Check ifunc resolver with CPU_FEATURE_USABLE [BZ #27072]
Check ifunc resolver with CPU_FEATURE_USABLE and tunables in dynamic and
static executables to verify that CPUID features are initialized early in
static PIE.

Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2021-01-21 10:22:26 -08:00
H.J. Lu
ff6d62e9ed <sys/platform/x86.h>: Remove the C preprocessor magic
In <sys/platform/x86.h>, define CPU features as enum instead of using
the C preprocessor magic to make it easier to wrap this functionality
in other languages.  Move the C preprocessor magic to internal header
for better GCC codegen when more than one features are checked in a
single expression as in x86-64 dl-hwcaps-subdirs.c.

1. Rename COMMON_CPUID_INDEX_XXX to CPUID_INDEX_XXX.
2. Move CPUID_INDEX_MAX to sysdeps/x86/include/cpu-features.h.
3. Remove struct cpu_features and __x86_get_cpu_features from
<sys/platform/x86.h>.
4. Add __x86_get_cpuid_feature_leaf to <sys/platform/x86.h> and put it
in libc.
5. Make __get_cpu_features() private to glibc.
6. Replace __x86_get_cpu_features(N) with __get_cpu_features().
7. Add _dl_x86_get_cpu_features to GLIBC_PRIVATE.
8. Use a single enum index for each CPU feature detection.
9. Pass the CPUID feature leaf to __x86_get_cpuid_feature_leaf.
10. Return zero struct cpuid_feature for the older glibc binary with a
smaller CPUID_INDEX_MAX [BZ #27104].
11. Inside glibc, use the C preprocessor magic so that cpu_features data
can be loaded just once leading to more compact code for glibc.

256 bits are used for each CPUID leaf.  Some leaves only contain a few
features.  We can add exceptions to such leaves.  But it will increase
code sizes and it is harder to provide backward/forward compatibilities
when new features are added to such leaves in the future.

When new leaves are added, _rtld_global_ro offsets will change which
leads to race condition during in-place updates. We may avoid in-place
updates by

1. Rename the old glibc.
2. Install the new glibc.
3. Remove the old glibc.

NB: A function, __x86_get_cpuid_feature_leaf , is used to avoid the copy
relocation issue with IFUNC resolver as shown in IFUNC resolver tests.
2021-01-21 05:58:17 -08:00
H.J. Lu
2ef23b5205 x86: Set header.feature_1 in TCB for always-on CET [BZ #27177]
Update dl_cet_check() to set header.feature_1 in TCB when both IBT and
SHSTK are always on.
2021-01-13 05:03:34 -08:00
H.J. Lu
ecce11aa07 x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker [BZ #26717]
GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA
levels:

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250

and -mneeded to emit GNU_PROPERTY_X86_ISA_1_NEEDED property with
GNU_PROPERTY_X86_ISA_1_V[234] marker:

https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13

Binutils support for GNU_PROPERTY_X86_ISA_1_V[234] marker were added by

commit b0ab06937385e0ae25cebf1991787d64f439bf12
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Fri Oct 30 06:49:57 2020 -0700

    x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker

and

commit 32930e4edbc06bc6f10c435dbcc63131715df678
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Fri Oct 9 05:05:57 2020 -0700

    x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker

GNU_PROPERTY_X86_ISA_1_NEEDED property in x86 ELF binaries indicate the
micro-architecture ISA level required to execute the binary.  The marker
must be added by programmers explicitly in one of 3 ways:

1. Pass -mneeded to GCC.
2. Add the marker in the linker inputs as this patch does.
3. Pass -z x86-64-v[234] to the linker.

Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
marker support to ld.so if binutils 2.32 or newer is used to build glibc:

1. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
markers to elf.h.
2. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
marker to abi-note.o based on the ISA level used to compile abi-note.o,
assuming that the same ISA level is used to compile the whole glibc.
3. Add isa_1 to cpu_features to record the supported x86 ISA level.
4. Rename _dl_process_cet_property_note to _dl_process_property_note and
add GNU_PROPERTY_X86_ISA_1_V[234] marker detection.
5. Update _rtld_main_check and _dl_open_check to check loaded objects
with the incompatible ISA level.
6. Add a testcase to verify that dlopen an x86-64-v4 shared object fails
on lesser platforms.
7. Use <get-isa-level.h> in dl-hwcaps-subdirs.c and tst-glibc-hwcaps.c.

Tested under i686, x32 and x86-64 modes on x86-64-v2, x86-64-v3 and
x86-64-v4 machines.

Marked elf/tst-isa-level-1 with x86-64-v4, ran it on x86-64-v3 machine
and got:

[hjl@gnu-cfl-2 build-x86_64-linux]$ ./elf/tst-isa-level-1
./elf/tst-isa-level-1: CPU ISA level is lower than required
[hjl@gnu-cfl-2 build-x86_64-linux]$
2021-01-07 13:10:13 -08:00
Florian Weimer
681900d296 x86: Harden printf against non-normal long double values (bug 26649)
The behavior of isnan/__builtin_isnan on bit patterns that do not
correspond to something that the CPU would produce from valid inputs
is currently under-defined in the toolchain. (The GCC built-in and
glibc disagree.)

The isnan check in PRINTF_FP_FETCH in stdio-common/printf_fp.c
assumes the GCC behavior that returns true for non-normal numbers
which are not specified as NaN. (The glibc implementation returns
false for such numbers.)

At present, passing non-normal numbers to __mpn_extract_long_double
causes this function to produce irregularly shaped multi-precision
integers, triggering undefined behavior in __printf_fp_l.

With GCC 10 and glibc 2.32, this behavior is not visible because
__builtin_isnan is used, which avoids calling
__mpn_extract_long_double in this case.  This commit updates the
implementation of __mpn_extract_long_double so that regularly shaped
multi-precision integers are produced in this case, avoiding
undefined behavior in __printf_fp_l.
2020-09-22 19:07:49 +02:00
H.J. Lu
9620398097 x86: Install <sys/platform/x86.h> [BZ #26124]
Install <sys/platform/x86.h> so that programmers can do

 #if __has_include(<sys/platform/x86.h>)
 #include <sys/platform/x86.h>
 #endif
 ...

   if (CPU_FEATURE_USABLE (SSE2))
 ...
   if (CPU_FEATURE_USABLE (AVX2))
 ...

<sys/platform/x86.h> exports only:

enum
{
  COMMON_CPUID_INDEX_1 = 0,
  COMMON_CPUID_INDEX_7,
  COMMON_CPUID_INDEX_80000001,
  COMMON_CPUID_INDEX_D_ECX_1,
  COMMON_CPUID_INDEX_80000007,
  COMMON_CPUID_INDEX_80000008,
  COMMON_CPUID_INDEX_7_ECX_1,
  /* Keep the following line at the end.  */
  COMMON_CPUID_INDEX_MAX
};

struct cpuid_features
{
  struct cpuid_registers cpuid;
  struct cpuid_registers usable;
};

struct cpu_features
{
  struct cpu_features_basic basic;
  struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};

/* Get a pointer to the CPU features structure.  */
extern const struct cpu_features *__x86_get_cpu_features
  (unsigned int max) __attribute__ ((const));

Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical.  The features
array can be expanded with backward binary compatibility for both .o and
.so files.  When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature.  No new symbol version is neeeded.

Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided.  HAS_CPU_FEATURE
can be used to identify processor features.

Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE.  It
doesn't support HAS_CPU_FEATURE.
2020-09-11 17:20:52 -07:00
H.J. Lu
9016b6f389 x86: Remove the unused __x86_prefetchw
Since

commit c867597bff
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Wed Jun 8 13:57:50 2016 -0700

    X86-64: Remove previous default/SSE2/AVX2 memcpy/memmove

removed the only usage of __x86_prefetchw, we can remove the unused
__x86_prefetchw.
2020-07-11 09:34:03 -07:00
H.J. Lu
9e38f455a6 x86: Add --enable-cet=permissive
When CET is enabled, it is an error to dlopen a non CET enabled shared
library in CET enabled application.  It may be desirable to make CET
permissive, that is disable CET when dlopening a non CET enabled shared
library.  With the new --enable-cet=permissive configure option, CET is
disabled when dlopening a non CET enabled shared library.

Add DEFAULT_DL_X86_CET_CONTROL to config.h.in:

 /* The default value of x86 CET control.  */
 #define DEFAULT_DL_X86_CET_CONTROL cet_elf_property

which enables CET features based on ELF property note.

--enable-cet=permissive it to

 /* The default value of x86 CET control.  */
 #define DEFAULT_DL_X86_CET_CONTROL cet_permissive

which enables CET features permissively.

Update tst-cet-legacy-5a, tst-cet-legacy-5b, tst-cet-legacy-6a and
tst-cet-legacy-6b to check --enable-cet and --enable-cet=permissive.
2020-05-18 08:38:53 -07:00
H.J. Lu
1fabdb9908 x86: Remove ARCH_CET_LEGACY_BITMAP [BZ #25397]
Since legacy bitmap doesn't cover jitted code generated by legacy JIT
engine, it isn't very useful.  This patch removes ARCH_CET_LEGACY_BITMAP
and treats indirect branch tracking similar to shadow stack by removing
legacy bitmap support.

Tested on CET Linux/x86-64 and non-CET Linux/x86-64.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-03-18 04:35:54 -07:00
H.J. Lu
d0093c5cef Call _dl_open_check after relocation [BZ #24259]
This is a workaround for [BZ #20839] which doesn't remove the NODELETE
object when _dl_open_check throws an exception.  Move it after relocation
in dl_open_worker to avoid leaving the NODELETE object mapped without
relocation.

	[BZ #24259]
	* elf/dl-open.c (dl_open_worker): Call _dl_open_check after
	relocation.
	* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-5a,
	tst-cet-legacy-5b, tst-cet-legacy-6a and tst-cet-legacy-6b.
	(modules-names): Add tst-cet-legacy-mod-5a, tst-cet-legacy-mod-5b,
	tst-cet-legacy-mod-5c, tst-cet-legacy-mod-6a, tst-cet-legacy-mod-6b
	and tst-cet-legacy-mod-6c.
	(CFLAGS-tst-cet-legacy-5a.c): New.
	(CFLAGS-tst-cet-legacy-5b.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-5a.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-5b.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-5c.c): Likewise.
	(CFLAGS-tst-cet-legacy-6a.c): Likewise.
	(CFLAGS-tst-cet-legacy-6b.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-6a.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-6b.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-6c.c): Likewise.
	($(objpfx)tst-cet-legacy-5a): Likewise.
	($(objpfx)tst-cet-legacy-5a.out): Likewise.
	($(objpfx)tst-cet-legacy-mod-5a.so): Likewise.
	($(objpfx)tst-cet-legacy-mod-5b.so): Likewise.
	($(objpfx)tst-cet-legacy-5b): Likewise.
	($(objpfx)tst-cet-legacy-5b.out): Likewise.
	(tst-cet-legacy-5b-ENV): Likewise.
	($(objpfx)tst-cet-legacy-6a): Likewise.
	($(objpfx)tst-cet-legacy-6a.out): Likewise.
	($(objpfx)tst-cet-legacy-mod-6a.so): Likewise.
	($(objpfx)tst-cet-legacy-mod-6b.so): Likewise.
	($(objpfx)tst-cet-legacy-6b): Likewise.
	($(objpfx)tst-cet-legacy-6b.out): Likewise.
	(tst-cet-legacy-6b-ENV): Likewise.
	* sysdeps/x86/tst-cet-legacy-5.c: New file.
	* sysdeps/x86/tst-cet-legacy-5a.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-5b.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-6.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-6a.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-6b.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-5.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-5a.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-5b.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-5c.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-6.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-6a.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-6b.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-6c.c: Likewise.
2019-07-01 12:23:22 -07:00
H.J. Lu
c089fd80c7 x86/CET: Add a re-exec test with legacy bitmap
Add a re-exec test with legacy bitmap to verify that legacy bitmap is
properly hanlded by kernel.

	* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-1a.
	(tst-cet-legacy-1a-ARGS): New.
	($(objpfx)tst-cet-legacy-1a): New target.
	* sysdeps/x86/tst-cet-legacy-1a.c: New file.
2018-11-23 07:31:07 -08:00
Siddhesh Poyarekar
dce452dc52 Rename the glibc.tune namespace to glibc.cpu
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to.  Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses.  Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.

	* NEWS: Mention the change.
	* elf/dl-tunables.list: Rename tune namespace to cpu.
	* sysdeps/powerpc/dl-tunables.list: Likewise.
	* sysdeps/x86/dl-tunables.list: Likewise.
	* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
	cpu.name.
	* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
	* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
	* manual/README.tunables: Likewise.
	* manual/tunables.texi: Likewise.
	* sysdeps/powerpc/cpu-features.c: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
	(init_cpu_features): Likewise.
	* sysdeps/x86/cpu-features.c: Likewise.
	* sysdeps/x86/cpu-features.h: Likewise.
	* sysdeps/x86/cpu-tunables.c: Likewise.
	* sysdeps/x86_64/Makefile: Likewise.
	* sysdeps/x86/dl-cet.c: Likewise.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-08-02 23:49:19 +05:30
H.J. Lu
c92a00d865 x86: Add tst-get-cpu-features-static to $(tests) [BZ #23458]
All tests should be added to $(tests).

Reviewed-by: Carlos O'Donell <carlos@redhat.com>

	[BZ #23458]
	* sysdeps/x86/Makefile (tests): Add tst-get-cpu-features-static.
2018-07-30 16:11:19 -07:00
H.J. Lu
fddcd00377 x86/CET: Add tests with legacy non-CET shared objects
Check binary compatibility of CET-enabled executables:

1. When CET-enabled executable is used with legacy non-CET shared object
at run-time, ld.so should disable SHSTK and put legacy non-CET shared
objects in legacy bitmap.
2. When IBT-enabled executable dlopens legacy non-CET shared object,
ld.so should put legacy shared object in legacy bitmap.
3. Use GLIBC_TUNABLES=glibc.tune.x86_shstk=[on|off|permissive] to
control how SHSTK is enabled.

	* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-1,
	tst-cet-legacy-2, tst-cet-legacy-2a, tst-cet-legacy-3,
	tst-cet-legacy-4, tst-cet-legacy-4a, tst-cet-legacy-4b
	and tst-cet-legacy-4c.
	(modules-names): Add tst-cet-legacy-mod-1, tst-cet-legacy-mod-2
	and tst-cet-legacy-mod-4.
	(CFLAGS-tst-cet-legacy-2.c): New.
	(CFLAGS-tst-cet-legacy-mod-1.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-2.c): Likewise.
	(CFLAGS-tst-cet-legacy-3.c): Likewise.
	(CFLAGS-tst-cet-legacy-4.c): Likewise.
	(CFLAGS-tst-cet-legacy-mod-4.c): Likewise.
	($(objpfx)tst-cet-legacy-1): Likewise.
	($(objpfx)tst-cet-legacy-2): Likewise.
	($(objpfx)tst-cet-legacy-2.out): Likewise.
	($(objpfx)tst-cet-legacy-2a): Likewise.
	($(objpfx)tst-cet-legacy-2a.out): Likewise.
	($(objpfx)tst-cet-legacy-4): Likewise.
	($(objpfx)tst-cet-legacy-4.out): Likewise.
	($(objpfx)tst-cet-legacy-4a): Likewise.
	($(objpfx)tst-cet-legacy-4a.out): Likewise.
	(tst-cet-legacy-4a-ENV): Likewise.
	($(objpfx)tst-cet-legacy-4b): Likewise.
	($(objpfx)tst-cet-legacy-4b.out): Likewise.
	(tst-cet-legacy-4b-ENV): Likewise.
	($(objpfx)tst-cet-legacy-4c): Likewise.
	($(objpfx)tst-cet-legacy-4c.out): Likewise.
	(tst-cet-legacy-4c-ENV): Likewise.
	* sysdeps/x86/tst-cet-legacy-1.c: New file.
	* sysdeps/x86/tst-cet-legacy-2.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-2a.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-3.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-4.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-4a.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-4b.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-4c.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-1.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-2.c: Likewise.
	* sysdeps/x86/tst-cet-legacy-mod-4.c: Likewise.
2018-07-25 04:47:05 -07:00
H.J. Lu
f753fa7dea x86: Support IBT and SHSTK in Intel CET [BZ #21598]
Intel Control-flow Enforcement Technology (CET) instructions:

https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-en
forcement-technology-preview.pdf

includes Indirect Branch Tracking (IBT) and Shadow Stack (SHSTK).

GNU_PROPERTY_X86_FEATURE_1_IBT is added to GNU program property to
indicate that all executable sections are compatible with IBT when
ENDBR instruction starts each valid target where an indirect branch
instruction can land.  Linker sets GNU_PROPERTY_X86_FEATURE_1_IBT on
output only if it is set on all relocatable inputs.

On an IBT capable processor, the following steps should be taken:

1. When loading an executable without an interpreter, enable IBT and
lock IBT if GNU_PROPERTY_X86_FEATURE_1_IBT is set on the executable.
2. When loading an executable with an interpreter, enable IBT if
GNU_PROPERTY_X86_FEATURE_1_IBT is set on the interpreter.
  a. If GNU_PROPERTY_X86_FEATURE_1_IBT isn't set on the executable,
     disable IBT.
  b. Lock IBT.
3. If IBT is enabled, when loading a shared object without
GNU_PROPERTY_X86_FEATURE_1_IBT:
  a. If legacy interwork is allowed, then mark all pages in executable
     PT_LOAD segments in legacy code page bitmap.  Failure of legacy code
     page bitmap allocation causes an error.
  b. If legacy interwork isn't allowed, it causes an error.

GNU_PROPERTY_X86_FEATURE_1_SHSTK is added to GNU program property to
indicate that all executable sections are compatible with SHSTK where
return address popped from shadow stack always matches return address
popped from normal stack.  Linker sets GNU_PROPERTY_X86_FEATURE_1_SHSTK
on output only if it is set on all relocatable inputs.

On a SHSTK capable processor, the following steps should be taken:

1. When loading an executable without an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on the executable.
2. When loading an executable with an interpreter, enable SHSTK if
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on interpreter.
  a. If GNU_PROPERTY_X86_FEATURE_1_SHSTK isn't set on the executable
     or any shared objects loaded via the DT_NEEDED tag, disable SHSTK.
  b. Otherwise lock SHSTK.
3. After SHSTK is enabled, it is an error to load a shared object
without GNU_PROPERTY_X86_FEATURE_1_SHSTK.

To enable CET support in glibc, --enable-cet is required to configure
glibc.  When CET is enabled, both compiler and assembler must support
CET.  Otherwise, it is a configure-time error.

To support CET run-time control,

1. _dl_x86_feature_1 is added to the writable ld.so namespace to indicate
if IBT or SHSTK are enabled at run-time.  It should be initialized by
init_cpu_features.
2. For dynamic executables:
   a. A l_cet field is added to struct link_map to indicate if IBT or
      SHSTK is enabled in an ELF module.  _dl_process_pt_note or
      _rtld_process_pt_note is called to process PT_NOTE segment for
      GNU program property and set l_cet.
   b. _dl_open_check is added to check IBT and SHSTK compatibilty when
      dlopening a shared object.
3. Replace i386 _dl_runtime_resolve and _dl_runtime_profile with
_dl_runtime_resolve_shstk and _dl_runtime_profile_shstk, respectively if
SHSTK is enabled.

CET run-time control can be changed via GLIBC_TUNABLES with

$ export GLIBC_TUNABLES=glibc.tune.x86_shstk=[permissive|on|off]
$ export GLIBC_TUNABLES=glibc.tune.x86_ibt=[permissive|on|off]

1. permissive: SHSTK is disabled when dlopening a legacy ELF module.
2. on: IBT or SHSTK are always enabled, regardless if there are IBT or
SHSTK bits in GNU program property.
3. off: IBT or SHSTK are always disabled, regardless if there are IBT or
SHSTK bits in GNU program property.

<cet.h> from CET-enabled GCC is automatically included by assembly codes
to add GNU_PROPERTY_X86_FEATURE_1_IBT and GNU_PROPERTY_X86_FEATURE_1_SHSTK
to GNU program property.  _CET_ENDBR is added at the entrance of all
assembly functions whose address may be taken.  _CET_NOTRACK is used to
insert NOTRACK prefix with indirect jump table to support IBT.  It is
defined as notrack when _CET_NOTRACK is defined in <cet.h>.

	 [BZ #21598]
	* configure.ac: Add --enable-cet.
	* configure: Regenerated.
	* elf/Makefille (all-built-dso): Add a comment.
	* elf/dl-load.c (filebuf): Moved before "dynamic-link.h".
	Include <dl-prop.h>.
	(_dl_map_object_from_fd): Call _dl_process_pt_note on PT_NOTE
	segment.
	* elf/dl-open.c: Include <dl-prop.h>.
	(dl_open_worker): Call _dl_open_check.
	* elf/rtld.c: Include <dl-prop.h>.
	(dl_main): Call _rtld_process_pt_note on PT_NOTE segment.  Call
	_rtld_main_check.
	* sysdeps/generic/dl-prop.h: New file.
	* sysdeps/i386/dl-cet.c: Likewise.
	* sysdeps/unix/sysv/linux/x86/cpu-features.c: Likewise.
	* sysdeps/unix/sysv/linux/x86/dl-cet.h: Likewise.
	* sysdeps/x86/cet-tunables.h: Likewise.
	* sysdeps/x86/check-cet.awk: Likewise.
	* sysdeps/x86/configure: Likewise.
	* sysdeps/x86/configure.ac: Likewise.
	* sysdeps/x86/dl-cet.c: Likewise.
	* sysdeps/x86/dl-procruntime.c: Likewise.
	* sysdeps/x86/dl-prop.h: Likewise.
	* sysdeps/x86/libc-start.h: Likewise.
	* sysdeps/x86/link_map.h: Likewise.
	* sysdeps/i386/dl-trampoline.S (_dl_runtime_resolve): Add
	_CET_ENDBR.
	(_dl_runtime_profile): Likewise.
	(_dl_runtime_resolve_shstk): New.
	(_dl_runtime_profile_shstk): Likewise.
	* sysdeps/linux/x86/Makefile (sysdep-dl-routines): Add dl-cet
	if CET is enabled.
	(CFLAGS-.o): Add -fcf-protection if CET is enabled.
	(CFLAGS-.os): Likewise.
	(CFLAGS-.op): Likewise.
	(CFLAGS-.oS): Likewise.
	(asm-CPPFLAGS): Add -fcf-protection -include cet.h if CET
	is enabled.
	(tests-special): Add $(objpfx)check-cet.out.
	(cet-built-dso): New.
	(+$(cet-built-dso:=.note)): Likewise.
	(common-generated): Add $(cet-built-dso:$(common-objpfx)%=%.note).
	($(objpfx)check-cet.out): New.
	(generated): Add check-cet.out.
	* sysdeps/x86/cpu-features.c: Include <dl-cet.h> and
	<cet-tunables.h>.
	(TUNABLE_CALLBACK (set_x86_ibt)): New prototype.
	(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
	(init_cpu_features): Call get_cet_status to check CET status
	and update dl_x86_feature_1 with CET status.  Call
	TUNABLE_CALLBACK (set_x86_ibt) and TUNABLE_CALLBACK
	(set_x86_shstk).  Disable and lock CET in libc.a.
	* sysdeps/x86/cpu-tunables.c: Include <cet-tunables.h>.
	(TUNABLE_CALLBACK (set_x86_ibt)): New function.
	(TUNABLE_CALLBACK (set_x86_shstk)): Likewise.
	* sysdeps/x86/sysdep.h (_CET_NOTRACK): New.
	(_CET_ENDBR): Define if not defined.
	(ENTRY): Add _CET_ENDBR.
	* sysdeps/x86/dl-tunables.list (glibc.tune): Add x86_ibt and
	x86_shstk.
	* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve): Add
	_CET_ENDBR.
	(_dl_runtime_profile): Likewise.
2018-07-16 14:08:27 -07:00
H.J. Lu
faaee1f07e x86: Support shadow stack pointer in setjmp/longjmp
Save and restore shadow stack pointer in setjmp and longjmp to support
shadow stack in Intel CET.  Use feature_1 in tcbhead_t to check if
shadow stack is enabled before saving and restoring shadow stack pointer.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>

	* sysdeps/i386/__longjmp.S: Include <jmp_buf-ssp.h>.
	(__longjmp): Restore shadow stack pointer if shadow stack is
	enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp
	isn't defined for __longjmp_cancel.
	* sysdeps/i386/bsd-_setjmp.S: Include <jmp_buf-ssp.h>.
	(_setjmp): Save shadow stack pointer if shadow stack is enabled
	and SHADOW_STACK_POINTER_OFFSET is defined.
	* sysdeps/i386/bsd-setjmp.S: Include <jmp_buf-ssp.h>.
	(setjmp): Save shadow stack pointer if shadow stack is enabled
	and SHADOW_STACK_POINTER_OFFSET is defined.
	* sysdeps/i386/setjmp.S: Include <jmp_buf-ssp.h>.
	(__sigsetjmp): Save shadow stack pointer if shadow stack is
	enabled and SHADOW_STACK_POINTER_OFFSET is defined.
	* sysdeps/unix/sysv/linux/i386/____longjmp_chk.S: Include
	<jmp_buf-ssp.h>.
	(____longjmp_chk): Restore shadow stack pointer if shadow stack
	is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
	* sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers):
	Remove jmp_buf-ssp.sym.
	* sysdeps/unix/sysv/linux/x86_64/____longjmp_chk.S: Include
	<jmp_buf-ssp.h>.
	(____longjmp_chk): Restore shadow stack pointer if shadow stack
	is enabled and SHADOW_STACK_POINTER_OFFSET is defined.
	* sysdeps/x86/Makefile (gen-as-const-headers): Add
	jmp_buf-ssp.sym.
	* sysdeps/x86/jmp_buf-ssp.sym: New dummy file.
	* sysdeps/x86_64/__longjmp.S: Include <jmp_buf-ssp.h>.
	(__longjmp): Restore shadow stack pointer if shadow stack is
	enabled, SHADOW_STACK_POINTER_OFFSET is defined and __longjmp
	isn't defined for __longjmp_cancel.
	* sysdeps/x86_64/setjmp.S: Include <jmp_buf-ssp.h>.
	(__sigsetjmp): Save shadow stack pointer if shadow stack is
	enabled and SHADOW_STACK_POINTER_OFFSET is defined.
2018-07-14 05:59:53 -07:00
H.J. Lu
d6cc1829aa x86: Use pad in pthread_unwind_buf to preserve shadow stack register
The pad array in struct pthread_unwind_buf is used by setjmp to save
shadow stack register.  We assert that size of struct pthread_unwind_buf
is no less than offset of shadow stack pointer + shadow stack pointer
size.

Since functions, like LIBC_START_MAIN, START_THREAD_DEFN as well as
these with thread cancellation, call setjmp, but never return after
__libc_unwind_longjmp, __libc_unwind_longjmp, which is defined as
__libc_longjmp on x86, doesn't need to restore shadow stack register.
__libc_longjmp, which is a private interface for thread cancellation
implementation in libpthread, is changed to call __longjmp_cancel,
instead of __longjmp.  __longjmp_cancel is a new internal function
in libc, which is similar to __longjmp, but doesn't restore shadow
stack register.

The compatibility longjmp and siglongjmp in libpthread.so are changed
to call __libc_siglongjmp, instead of __libc_longjmp, so that they will
restore shadow stack register.

Tested with build-many-glibcs.py.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>

	* nptl/pthread_create.c (START_THREAD_DEFN): Clear previous
	handlers after setjmp.
	* setjmp/longjmp.c (__libc_longjmp): Don't define alias if
	defined.
	* sysdeps/unix/sysv/linux/x86/setjmpP.h: Include
	<libc-pointer-arith.h>.
	(_JUMP_BUF_SIGSET_BITS_PER_WORD): New.
	(_JUMP_BUF_SIGSET_NSIG): Changed to 96.
	(_JUMP_BUF_SIGSET_NWORDS): Changed to use ALIGN_UP and
	_JUMP_BUF_SIGSET_BITS_PER_WORD.
	* sysdeps/x86/Makefile (sysdep_routines): Add __longjmp_cancel.
	* sysdeps/x86/__longjmp_cancel.S: New file.
	* sysdeps/x86/longjmp.c: Likewise.
	* sysdeps/x86/nptl/pt-longjmp.c: Likewise.
2018-05-02 06:17:41 -07:00
H.J. Lu
2a1f15b1a9 Remove x86 ifunc-defines.sym and rtld-global-offsets.sym
Merge x86 ifunc-defines.sym with x86 cpu-features-offsets.sym.  Remove
x86 ifunc-defines.sym and rtld-global-offsets.sym.  No code changes on
i686 and x86-64.

	* sysdeps/i386/i686/multiarch/Makefile (gen-as-const-headers):
	Remove ifunc-defines.sym.
	* sysdeps/x86_64/multiarch/Makefile (gen-as-const-headers):
	Likewise.
	* sysdeps/i386/i686/multiarch/ifunc-defines.sym: Removed.
	* sysdeps/x86/rtld-global-offsets.sym: Likewise.
	* sysdeps/x86_64/multiarch/ifunc-defines.sym: Likewise.
	* sysdeps/x86/Makefile (gen-as-const-headers): Remove
	rtld-global-offsets.sym.
	* sysdeps/x86_64/multiarch/ifunc-defines.sym: Merged with ...
	* sysdeps/x86/cpu-features-offsets.sym: This.
	* sysdeps/x86/cpu-features.h: Include <cpu-features-offsets.h>
	instead of <ifunc-defines.h> and <rtld-global-offsets.h>.
2016-05-11 05:51:39 -07:00
H.J. Lu
89569c8bb6 Run tst-prelink test for GLOB_DAT reloc
Run tst-prelink test on targets with GLOB_DAT relocaton.

	* config.make.in (have-glob-dat-reloc): New.
	* configure.ac (libc_cv_has_glob_dat): New.  Set to yes if
	target supports GLOB_DAT relocaton. AC_SUBST.
	* configure: Regenerated.
	* elf/Makefile (tests): Add tst-prelink.
	(tests-special): Add $(objpfx)tst-prelink-cmp.out.
	(tst-prelink-ENV): New.
	($(objpfx)tst-prelink-conflict.out): Likewise.
	($(objpfx)tst-prelink-cmp.out): Likewise.
	* sysdeps/x86/tst-prelink.c: Moved to ...
	* elf/tst-prelink.c: Here.
	* sysdeps/x86/tst-prelink.exp: Moved to ...
	* elf/tst-prelink.exp: Here.
	* sysdeps/x86/Makefile (tests): Don't add tst-prelink.
	(tst-prelink-ENV): Removed.
	($(objpfx)tst-prelink-conflict.out): Likewise.
	($(objpfx)tst-prelink-cmp.out): Likewise.
	(tests-special): Don't add $(objpfx)tst-prelink-cmp.out.
2015-11-14 12:00:38 -08:00
H.J. Lu
fe534fe898 Add a test for prelink output
This test applies to i386 and x86_64 which set R_386_GLOB_DAT and
R_X86_64_GLOB_DAT to ELF_RTYPE_CLASS_EXTERN_PROTECTED_DATA.

	[BZ #19178]
	* sysdeps/x86/Makefile (tests): Add tst-prelink.
	(tst-prelink-ENV): New.
	($(objpfx)tst-prelink-conflict.out): Likewise.
	($(objpfx)tst-prelink-cmp.out): Likewise.
	(tests-special): Add $(objpfx)tst-prelink-cmp.out.
	* sysdeps/x86/tst-prelink.c: New file.
	* sysdeps/x86/tst-prelink.exp: Likewise.
2015-11-10 12:27:24 -08:00
H.J. Lu
38d22f9f48 Don't disable SSE in x86-64 ld.so
Since x86-64 ld.so preserves vector registers now, we can use SSE in
x86-64 ld.so.  We should run tst-ld-sse-use.sh only on i386.

	* sysdeps/x86/Makefile [$(subdir) == elf] (CFLAGS-.os,
	tests-special, $(objpfx)tst-ld-sse-use.out): Moved to ...
	* sysdeps/i386/Makefile [$(subdir) == elf] (CFLAGS-.os,
	tests-special, $(objpfx)tst-ld-sse-use.out): Here.  Update
	comments.
	* sysdeps/x86_64/Makefile [$(subdir) == elf] (CFLAGS-.os): Add
	-mno-mmx for $(all-rtld-routines).
	* sysdeps/x86/tst-ld-sse-use.sh: Moved to ...
	* sysdeps/i386/tst-ld-sse-use.sh: Here.  Replace x86-64 with
	i386.
2015-08-26 07:55:42 -07:00
H.J. Lu
e2e4f56056 Add _dl_x86_cpu_features to rtld_global
This patch adds _dl_x86_cpu_features to rtld_global in x86 ld.so
and initializes it early before __libc_start_main is called so that
cpu_features is always available when it is used and we can avoid
calling __init_cpu_features in IFUNC selectors.

	* sysdeps/i386/dl-machine.h: Include <cpu-features.c>.
	(dl_platform_init): Call init_cpu_features.
	* sysdeps/i386/dl-procinfo.c (_dl_x86_cpu_features): New.
	* sysdeps/i386/i686/cacheinfo.c
	(DISABLE_PREFERRED_MEMORY_INSTRUCTION): Removed.
	* sysdeps/i386/i686/multiarch/Makefile (aux): Remove init-arch.
	* sysdeps/i386/i686/multiarch/Versions: Removed.
	* sysdeps/i386/i686/multiarch/ifunc-defines.sym (KIND_OFFSET):
	Removed.
	* sysdeps/i386/ldsodefs.h: Include <cpu-features.h>.
	* sysdeps/unix/sysv/linux/x86/Makefile
	(libpthread-sysdep_routines): Remove init-arch.
	* sysdeps/unix/sysv/linux/x86_64/dl-procinfo.c: Include
	<sysdeps/x86_64/dl-procinfo.c> instead of
	sysdeps/generic/dl-procinfo.c>.
	* sysdeps/x86/Makefile [$(subdir) == csu] (gen-as-const-headers):
	Add cpu-features-offsets.sym and rtld-global-offsets.sym.
	[$(subdir) == elf] (sysdep-dl-routines): Add dl-get-cpu-features.
	[$(subdir) == elf] (tests): Add tst-get-cpu-features.
	[$(subdir) == elf] (tests-static): Add
	tst-get-cpu-features-static.
	* sysdeps/x86/Versions: New file.
	* sysdeps/x86/cpu-features-offsets.sym: Likewise.
	* sysdeps/x86/cpu-features.c: Likewise.
	* sysdeps/x86/cpu-features.h: Likewise.
	* sysdeps/x86/dl-get-cpu-features.c: Likewise.
	* sysdeps/x86/libc-start.c: Likewise.
	* sysdeps/x86/rtld-global-offsets.sym: Likewise.
	* sysdeps/x86/tst-get-cpu-features-static.c: Likewise.
	* sysdeps/x86/tst-get-cpu-features.c: Likewise.
	* sysdeps/x86_64/dl-procinfo.c: Likewise.
	* sysdeps/x86_64/cacheinfo.c (__cpuid_count): Removed.
	Assume USE_MULTIARCH is defined and don't check it.
	(is_intel): Replace __cpu_features with GLRO(dl_x86_cpu_features).
	(is_amd): Likewise.
	(max_cpuid): Likewise.
	(intel_check_word): Likewise.
	(__cache_sysconf): Don't call __init_cpu_features.
	(__x86_preferred_memory_instruction): Removed.
	(init_cacheinfo): Don't call __init_cpu_features. Replace
	__cpu_features with GLRO(dl_x86_cpu_features).
	* sysdeps/x86_64/dl-machine.h: <cpu-features.c>.
	(dl_platform_init): Call init_cpu_features.
	* sysdeps/x86_64/ldsodefs.h: Include <cpu-features.h>.
	* sysdeps/x86_64/multiarch/Makefile (aux): Remove init-arch.
	* sysdeps/x86_64/multiarch/Versions: Removed.
	* sysdeps/x86_64/multiarch/cacheinfo.c: Likewise.
	* sysdeps/x86_64/multiarch/init-arch.c: Likewise.
	* sysdeps/x86_64/multiarch/ifunc-defines.sym (KIND_OFFSET):
	Removed.
	* sysdeps/x86_64/multiarch/init-arch.h: Rewrite.
2015-08-13 03:41:22 -07:00
Joseph Myers
b7e02da4e9 Run tst-ld-sse-use.sh with bash.
tst-ld-sse-use.sh is a bash script, not a POSIX shell script, and so
needs to be run with $(BASH) not $(SHELL) to avoid errors of the form:

../sysdeps/x86/tst-ld-sse-use.sh: 41: ../sysdeps/x86/tst-ld-sse-use.sh: declare: not found

(when /bin/sh is dash).  This patch makes that change.

Tested for x86_64.

	* sysdeps/x86/Makefile ($(objpfx)tst-ld-sse-use.out): Run script
	with $(BASH) not $(SHELL).
2014-09-29 23:24:37 +00:00
Siddhesh Poyarekar
5379aebddd Enhance tst-xmmymm.sh to detect zmm register usage in ld.so (BZ #16194)
2d63a517e4 added support to save and
restore zmm register in the dynamic linker, but did not enhance
test-xmmymm.sh to detect accidental usage of these registers.  The
patch below adds that check.

The script has also been renamed to tst-ld-sse-use.sh.  To see the
minimal changes, run `git show -M`.

	[BZ #16194]
	* sysdeps/x86/tst-xmmymm.sh: Rename file to...
	* sysdeps/x86/tst-ld-sse-use.sh: ... this.  Check for zmm
	register usage.
	* sysdeps/x86/Makefile: Adjust.
2014-09-12 12:31:05 +05:30
Joseph Myers
f214606a0e Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.

In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.

Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that.  Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present).  Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.

For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration.  Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets.  This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.

Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before.  We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.

It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable.  The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.

The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out.  If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.

Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.

	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(tests): Depend on $(tests-special).
	* Makerules (check-abi-list): New variable.
	(check-abi): Depend on $(check-abi-list).
	[$(subdir) = elf] (tests-special): Add
	$(objpfx)check-abi-libc.out.
	[$(build-shared) = yes && subdir] (tests-special): Add
	$(check-abi-list).
	[$(build-shared) = yes && subdir] (tests): Do not depend on
	check-abi.
	* Rules (tests): Depend on $(tests-special).
	(xtests): Depend on $(xtests-special).
	* catgets/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* conform/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* elf/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* grp/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* iconv/Makefile (xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* iconvdata/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* intl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.  Also add
	$(objpfx)tst-gettext.out.
	* io/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* libio/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* malloc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* misc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl_db/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* posix/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* resolv/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* stdio-common/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(do-tst-unbputc): Remove target.
	(do-tst-printf): Likewise.
	* stdlib/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* string/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* sysdeps/x86/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.

localedata:
	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
Joseph Myers
f0881698bf Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules.  This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.

Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.

Tested x86_64.

	* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
	($(objpfx)check-local-headers.out): Likewise.
	($(objpfx)begin-end-check.out): Likewise.
	* Makerules (check-abi-%.out): Likewise.
	* catgets/Makefile ($(objpfx)test1.cat): Likewise.
	($(objpfx)test2.cat): Likewise.
	($(objpfx)de/libc.cat): Likewise.
	($(objpfx)test-gencat.out): Likewise.
	* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
	* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
	($(objpfx)noload-mem): Likewise.
	($(objpfx)tst-pathopt.out): Likewise.
	($(objpfx)tst-rtld-load-self.out): Likewise.
	($(objpfx)tst-array1-cmp.out): Likewise.
	($(objpfx)tst-array1-static-cmp.out): Likewise.
	($(objpfx)tst-array2-cmp.out): Likewise.
	($(objpfx)tst-array3-cmp.out): Likewise.
	($(objpfx)tst-array4-cmp.out): Likewise.
	($(objpfx)tst-array5-cmp.out): Likewise.
	($(objpfx)tst-array5-static-cmp.out): Likewise.
	($(objpfx)check-textrel.out): Likewise.
	($(objpfx)check-execstack.out): Likewise.
	($(objpfx)check-localplt.out): Likewise.
	($(objpfx)order2-cmp.out): Likewise.
	($(objpfx)tst-leaks1-mem): Likewise.
	($(objpfx)tst-leaks1-static-mem): Likewise.
	($(objpfx)tst-initorder-cmp.out): Likewise.
	($(objpfx)tst-initorder2-cmp.out): Likewise.
	($(objpfx)tst-unused-dep.out): Likewise.
	($(objpfx)tst-unused-dep-cmp.out): Likewise.
	* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
	* iconv/Makefile (test-iconvconfig): Likewise.
	* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
	($(objpfx)iconv-test.out): Likewise.
	($(objpfx)tst-tables.out): Likewise.
	* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
	($(objpfx)tst-gettext.out): Likewise.
	($(objpfx)tst-translit.out): Likewise.
	($(objpfx)tst-gettext2.out): Likewise.
	($(objpfx)tst-gettext4.out): Likewise.
	($(objpfx)tst-gettext6.out): Likewise.
	* io/Makefile ($(objpfx)ftwtest.out): Likewise.
	* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
	($(objpfx)tst-fopenloc-cmp.out): Likewise.
	($(objpfx)tst-fopenloc-mem.out): Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
	* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
	* posix/Makefile ($(objpfx)globtest.out): Likewise.
	($(objpfx)wordexp-tst.out): Likewise.
	($(objpfx)annexc.out): Likewise.
	($(objpfx)tst-fnmatch-mem): Likewise.
	($(objpfx)bug-regex2-mem): Likewise.
	($(objpfx)bug-regex14-mem): Likewise.
	($(objpfx)bug-regex21-mem): Likewise.
	($(objpfx)bug-regex31-mem): Likewise.
	($(objpfx)tst-vfork3-mem): Likewise.
	($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
	($(objpfx)tst-pcre-mem): Likewise.
	($(objpfx)tst-boost-mem): Likewise.
	($(objpfx)tst-getconf.out): Likewise.
	($(objpfx)bug-ga2-mem): Likewise.
	($(objpfx)bug-glob2-mem): Likewise.
	* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
	($(objpfx)mtrace-tst-leaks2): Likewise.
	* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
	($(objpfx)tst-printf.out): Likewise.
	($(objpfx)tst-setvbuf1.out): Likewise.
	($(objpfx)tst-setvbuf1-cmp.out): Likewise.
	* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
	($(objpfx)tst-fmtmsg.out): Likewise.
	* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
	* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.

localedata:
	* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
	($(objpfx)tst-fmon.out): Likewise.
	($(objpfx)tst-numeric.out): Likewise.
	($(objpfx)tst-locale.out): Likewise.
	($(objpfx)tst-rpmatch.out): Likewise.
	($(objpfx)tst-trans.out): Likewise.
	($(objpfx)tst-mbswcs.out): Likewise.
	($(objpfx)tst-ctype.out): Likewise.
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.

nptl:
	* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
	($(objpfx)tst-tls6.out): Likewise.
	($(objpfx)tst-cleanup0.out): Likewise.
	($(objpfx)tst-cleanup0-cmp.out): Likewise.
	($(objpfx)tst-cancel-wrappers.out): Likewise.
	($(objpfx)tst-oddstacklimit.out): Likewise.

nptl_db:
	* Makefile ($(objpfx)db-symbols.out): Use
	$(evaluate-test).
2014-02-21 21:48:08 +00:00
Joseph Myers
0fbb0fbc2e Use configured $(NM), $(OBJDUMP), $(READELF) in tst-xmmymm.sh. 2012-11-08 00:01:46 +00:00
H.J. Lu
eb48db7e89 Also run tst-xmmymm.sh on i386 ld.so 2012-11-07 13:50:08 -08:00
H.J. Lu
f62c8abcfb Compile x86 rtld with -mno-sse -mno-mmx 2012-11-02 18:43:27 -07:00