Ref gcc.gnu.org/bugzilla/show_bug.cgi?id=52839#c10
Release barriers are needed to ensure that any memory written by
init_routine is seen by other threads before *once_control changes.
In the case of clear_once_control we need to flush any partially
written state.
Using madvise with MADV_DONTNEED to release memory back to the kernel
is not sufficient to change the commit charge accounted against the
process on Linux. It is OK however, when overcommit is enabled or is
heuristic. However, when overcommit is restricted to a percentage of
memory setting the contents of /proc/sys/vm/overcommit_memory as 2, it
makes a difference since memory requests will fail. Hence, we do what
we do with secure exec binaries, which is to call mmap on the region
to be dropped with MAP_FIXED. This internally unmaps the pages in
question and reduces the amount of memory accounted against the
process.
Commit glibc-2.14~10 disallowed rtld self loading to avoid a segfault
that used to happen when rtld was loading itself in normal mode.
Unfortunately, that commit disallowed all modes of self loading,
including those that used to work before. This change limits the check
for self loading to normal mode only, so that instruments like ldd could
handle rtld properly.
* csu/libc-tls.c (static_dtv): Renamed to ...
(_dl_static_dtv): This. Make it global.
(_dl_initial_dtv): Removed.
(__libc_setup_tls): Updated.
* elf/dl-tls.c (DL_INITIAL_DTV): New macro.
(_dl_deallocate_tls): Replace GL(dl_initial_dtv) with
DL_INITIAL_DTV.
[BZ #1349]
malloc_usable_size returns the usable size in an allocated chunk,
which may be >= the requested size. In the case of MALLOC_CHECK_ being
exported to > 0 however, only the requested size is usable, since a
magic value is written at the end of the request size to trap writes
beyond request bounds. Hence, when MALLOC_CHECK_ is exported to > 0,
malloc_usable_size() should return the request size.
* sysdeps/sparc/sparc32/sparcv9/addmul_1.S: New file.
* sysdeps/sparc/sparc32/sparcv9/submul_1.S: New file.
* sysdeps/sparc/sparc32/sparcv9/mul_1.S: New file.
* sysdeps/i386/i686/fpu/multiarch/Makefile (sysdep_routines):
Add s_sinf-sse2, s_conf-sse2.
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S: New file.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S: New file.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: New file.
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: New file.
* sysdeps/ieee754/flt-32/s_sinf.c (SINF, SINF_FUNC): Add macros
for using routine as __sinf_ia32.
Use macro for function declaration and weak_alias.
* sysdeps/ieee754/flt-32/s_cosf.c (COSF, COSF_FUNC): Add macros
for using routine as __cosf_ia32.
Use macro for function declaration and weak_alias.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: Fix Copyright.
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Fix Copyright.
* sysdeps/x86_64/fpu/s_sinf.S: New file.
* sysdeps/x86_64/fpu/s_cosf.S: New file.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
* math/libm-test.inc (cos_test): Add more test cases.
(sin_test): Likewise.
(sincos_test): Likewise.
[BZ #14538]
* sysdeps/x86_64/dl-machine.h (elf_machine_dynamic): Use the
first element of the GOT.
(elf_machine_load_address): Return the difference between
the runtime address of _DYNAMIC and elf_machine_dynamic ().
The ttyname and ttyname_r functions on Linux now fall back to
searching for the tty file descriptor in /dev/pts or /dev if /proc is
not available. This allows creation of chroots without the procfs
mounted on /proc.
Fixes BZ #14516.
Due to the rise of kbuild type build systems (as the Linux kernel is a
popularly emulated environment), the V variable has become common as a
knob for controlling verbosity. Unfortunately, if you run `make V=1`
with glibc during install, it fails with weird errors due to the glibc
build already using this variable for versioning information.
Granted, overriding this variable in the glibc context makes no sense
so people shouldn't be doing it, but when paired with build frameworks
that like to use one set of options for all packages, glibc starts to
stick out as an oddball (in that it fails). Considering it's easy
enough to rename (it's used in just one place), let's do so.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Initially based on the versions found in wcsmbs/* ; these files have
been changed by hand unrolling, and adding some additional variables
to allow some read-ahead to occur, which then relieves some of the
wait-for-increment/wait-for-load/wait-for-compare-results pressure
that was slowing down every iteration through the while-loop.
For 64-bit Power7, These changes give an approx 20% throughput boost
for the wcschr and wcsrchr functions; and approx 40% boost for the
wcscpy function. 32-bit improvements appear to be slightly better
with ~ %30 and ~ %45 respectively. Results for Power6 closely match
those for power7.
Assorted tweaking, twisting and tuning to squeeze a few additional cycles
out of the memchr code. Changes include bypassing the shift pairs
(sld,srd) when they are not required, and unrolling the small_loop that
handles short and trailing strings.
Per scrollpipe data measuring aligned strings for 64-bit, these changes
save between five and eight cycles (9-13% overall) for short strings (<32),
Longer aligned strings see slight improvement of 1-3% due to bypassing the
shifts and the instruction rearranging.
These internal knobs are not exposed as part of the public ABI, so mark
them hidden to avoid generating relocations against them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We can't assume sock_cloexec and pipe2 are bound together as the former
defines are found in glibc only while the latter are a combo of kernel
headers and glibc. So if we do a runtime detection of SOCK_CLOEXEC, but
pipe2() is a stub inside of glibc, we hit a problem. For example:
main()
{
getgrnam("portage");
if (!popen("ls", "r"))
perror("popen()");
}
getgrnam() will detect that the kernel supports SOCK_CLOEXEC and then set
both __have_sock_cloexec and __have_pipe2 to true. But if glibc was built
against older kernel headers where __NR_pipe2 does not exist, glibc will
have a ENOSYS stub for it. So popen() will always fail as glibc assumes
pipe2() works.
While this isn't too much of an issue for some arches as they added the
functionality to the kernel at the same time, not all arches are that
lucky.
Since the code already has dedicated names for each feature, delete the
defines wiring these three features together and make each one a proper
dedicated knob.
We've been carrying this in Gentoo since glibc-2.9.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
When unmapping the first object in a namespace, the runtime linker
did not update the externally visible pointer. This resulted in
debuggers seeing pointers to memory that had been freed.
The original runtime linker auditing interface described
by Solaris allows the 5th argument of la_pltenter() to be
modified. This patch cleans up the ldsodefs.h definitions
such that the 5th argument is not constant.
At one point the 5th argument *was* constant but this was
changed with commit 2413fdba7a.
This patch updates alpha, ia64, mips, sh and sparc with similar
changes.
2012-08-15 Liubov Dmitrieva <liubov.dmitrieva@gmail.com>
[BZ #14195]
* sysdeps/i386/i686/multiarch/strcmp-sssse3.S: Fix
segmentation fault for a case of two empty input strings.
* string/test-strncasecmp.c (check1): Renamed to...
(bz12205): ...this.
(bz14195): Add new testcase for two empty input strings and N > 0.
(test_main): Call new testcase, adapt for renamed function.
Pretty sure we require recent enough versions of gcc/binutils to make this
check pointless. I can't any logs in the last few years where this check
didn't return "yes".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* malloc.c/arena.c (reused_arena): New parameter, avoid_arena.
When avoid_arena is set, don't retry in the that arena. Pick the
next one, whatever it might be.
(arena_get2): New parameter avoid_arena, pass through to reused_arena.
(arena_lock): Pass in new parameter to arena_get2.
* malloc/malloc.c (__libc_memalign): Pass in new parameter to
arena_get2.
(__libc_malloc): Unify retrying after main arena failure with
__libc_memalign version.
(__libc_valloc, __libc_pvalloc, __libc_calloc): Likewise.
(__ptrace_eventcodes): Add new value PTRACE_EVENT_SECCOMP from Linux 3.5.
(__ptrace_setoptions): Add new value PTRACE_O_TRACESECCOMP, adjust PTRACE_O_MASK.
- make LOGIN non-static, as it would make getlogin_r no more reentrant; change its type to string_t
- fail with ERANGE if NAME has not enough space for the actual login string
- copy with memcpy only the chars of the string
Create a new create_address_port subroutine to isolate the address port creation
(for both local and remove sockets), and use it inside HURD_DPORT_USE.
Also intialize APORT to MACH_PORT_NULL and make sure to always deallocate it,
when not null.
Add support for STT_GNU_IFUNC symbols and the new R_390_IRELATIVE
relocation. Provide optimized version of memcpy, memset, and memcmp
for z10 and z196.
limit
[BZ #14307]
* sysdeps/posix/getaddrinfo.c (gaih_inet): Increase the size of
the temporary buffer used to invoke __gethostbyname2_r,
__gethostbyaddr_r and gethostbyname4_r to make room for struct
host_data / struct gaih_addrtuple.
* resolv/nss_dns/dns-host.c (global scope): Move definition of
implementation constants MAX_NR_ALIASES and MAX_NR_ADDRS to
header file nss/nsswitch.h.
* nss/nsswitch.h (global scope): Add definition of implementation
constants MAX_NR_ALIASES and MAX_NR_ADDRS (moved from
resolv/nss_dns/dns-host.c).
