This is the first of a series of patches to sync with Gnulib commit
615b43e1f9. This patch adopts most of the changes of Gnulib, except it
retains GETCWD_RETURN_TYPE and does not always use a 64-bit internal
API. These remaining discrepancies will be addressed in later patches
in this series.
Checked on x86_64-linux-gnu and i686-linux-gnu.
X32 uses the same 64-bit syscall interface for set_thread_area. But
__NR_set_thread_area is missing from <asm/unistd_x32.h>. A kernel patch
was submitted:
From 7b05d5b43ae2545e0d4a3edb24205d18bc883626 Mon Sep 17 00:00:00 2001
From: "H.J. Lu" <hjl.tools@gmail.com>
Date: Sat, 15 Aug 2020 10:34:00 -0700
Subject: [PATCH] x86-64: Enable x32 set_thread_area
X32 uses the common 64-bit syscall interface for set_thread_area. Add
<fixup-asm-unistd.h> to provide __NR_set_thread_area.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
This patch lays out the top-level organisation of the RISC-V 32-bit port.
It provides all the Implies files as well as various other fragments of
the build infrastructure.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Specify the minimum kernel version for RISC-V 32-bit as the 5.4 kernel.
We require this commit: "waitid: Add support for waiting for the current
process group" for the kernel as it adds support for the P_PGID id for
the waitid syscall. Without this patch we can't replace the wait4
syscall on 64-bit time_t only systems.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
This patch adds the ABI implementation for 32-bit RISC-V. It contains
the Linux-specific and RISC-V architecture code.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
With RV32 support the list of possible RISC-V system directories
increases to:
- /lib64/lp64d
- /lib64/lp64
- /lib32/ilp32d
- /lib32/ilp32
- /lib (only ld.so)
This patch changes the add_system_dir () macro to support the new ilp32d
and ilp32 directories for RV32. While refactoring this code let's split
out the confusing if statements into a loop to make it easier to
understand and extend.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
sysdep.h redefines only the syscall where the generic implementation
still does not have actual 64-bit time_t support:
/* Workarounds for generic code needing to handle 64-bit time_t. */
/* Fix sysdeps/unix/sysv/linux/clock_getcpuclockid.c. */
#define __NR_clock_getres __NR_clock_getres_time64
/* Fix sysdeps/nptl/lowlevellock-futex.h. */
#define __NR_futex __NR_futex_time64
[...]
This patch also adds a comment that it is a workaround to handle 64-bit
time_t and on each #define comment for which implementation it intends
to.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Remove a duplicate inclusion of <sysdeps/unix/sysdep.h> which is already
pulled via <sysdeps/unix/sysv/linux/generic/sysdep.h>, and the inclusion
of <errno.h> whose definition of `__set_errno' is not needed here.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
Using the original glibc headers under bits/ let's make small
modifications to use 64-bit time_t and off_t for both RV32 and RV64.
For the typesizes.h, here are justifications for the changes from the
generic version (based on Arnd's very helpful feedback):
- All the !__USE_FILE_OFFSET64 types (__off_t, __ino_t, __rlim_t, ...)
are changed to match the 64-bit replacements.
- __time_t is defined to 64 bit, but no __time64_t is added. This makes
sense as we don't have the time64 support for other 32-bit
architectures yet, and it will be easy to change when that happens.
- __suseconds_t is 64-bit. This matches what we use the kernel ABI for
the few drivers that are relying on 'struct timeval' input arguments
in ioctl, as well as the adjtimex system call. It means that timeval
has to be defined without the padding, unlike timespec, which needs
padding.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
With arch-syscall.h it can now assumes the existance of either
__NR_utimensat or __NR_utimensat_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_timer_settime or __NR_time_settime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_timer_gettime or __NR_time_gettime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_sched_rr_get_interval or __NR_sched_rr_get_interval_time64.
The 32-bit time_t support is now only build for
!__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_ppoll or __NR_ppoll_time64. The 32-bit time_t support is now
only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_mq_timedsend or __NR_mq_timedsend_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_mq_timedreceive or __NR_mq_timedreceive_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_settime or __NR_clock_settime_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_nanosleep or __NR_clock_nanosleep_time64. The 32-bit
time_t support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
With arch-syscall.h it can now assumes the existance of either
__NR_clock_gettime or __NR_clock_gettime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
It also uses the time64-support functions to simplify it further.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
With arch-syscall.h it can now assumes the existance of either
__NR_clock_adjtime or __NR_clock_adjtime_time64. The 32-bit time_t
support is now only build for !__ASSUME_TIME64_SYSCALLS.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
These helper functions are used to optimize the 64-bit time_t support on
configurations that requires support for 32-bit time_t fallback
(!__ASSUME_TIME64_SYSCALLS). The idea is once the kernel advertises that
it does not have 64-bit time_t support, glibc will stop to try issue the
64-bit time_t syscall altogether.
For instance:
#ifndef __NR_symbol_time64
# define __NR_symbol_time64 __NR_symbol
#endif
int r;
if (supports_time64 ())
{
r = INLINE_SYSCALL_CALL (symbol, ...);
if (r == 0 || errno != ENOSYS)
return r;
mark_time64_unsupported ();
}
#ifndef __ASSUME_TIME64_SYSCALLS
<32-bit fallback syscall>
#endif
return r;
On configuration with default 64-bit time_t this optimization should be
optimized away by the compiler resulting in no overhead.
Unfortunately some HWCAP names like HWCAP_S390_VX differs between
kernel (see <kernel>/arch/s390/include/asm/elf.h) and glibc.
Therefore, those HWCAP names from kernel are now introduced as alias
This patch updates the kernel version in the test tst-mman-consts.py
to 5.8. (There are no new MAP_* constants covered by this test in 5.8
that need any other header changes.)
Tested with build-many-glibcs.py.
This provides correct AT_EACCESS handling and also takes
Linux security modules into account.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.8 has one new syscall, faccessat2. Update syscall-names.list
and regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Support usable check for all CPU features with the following changes:
1. Change struct cpu_features to
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
so that there is a usable bit for each cpuid bit.
2. After the cpuid bits have been initialized, copy the known bits to the
usable bits. EAX/EBX from INDEX_1 and EAX from INDEX_7 aren't used for
CPU feature detection.
3. Clear the usable bits which require OS support.
4. If the feature is supported by OS, copy its cpuid bit to its usable
bit.
5. Replace HAS_CPU_FEATURE and CPU_FEATURES_CPU_P with CPU_FEATURE_USABLE
and CPU_FEATURE_USABLE_P to check if a feature is usable.
6. Add DEPR_FPU_CS_DS for INDEX_7_EBX_13.
7. Unset MPX feature since it has been deprecated.
The results are
1. If the feature is known and doesn't requre OS support, its usable bit
is copied from the cpuid bit.
2. Otherwise, its usable bit is copied from the cpuid bit only if the
feature is known to supported by OS.
3. CPU_FEATURE_USABLE/CPU_FEATURE_USABLE_P are used to check if the
feature can be used.
4. HAS_CPU_FEATURE/CPU_FEATURE_CPU_P are used to check if CPU supports
the feature.
A big shoutout to Cupertino Miranda <cmiranda@synopsys.com> for his
valuable contribution in initial bringup and debugging on Linux and
later in solving pesky unwinding/cancelation failures in testsuite.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Teach the linker that __mcount_internal, __sigjmp_save_symbol,
__syscall_error and __GI_exit do not use r2, so that it does not need to
recover r2 after the call.
Test at configure time if the assembler supports @notoc and define
USE_PPC64_NOTOC.
Make the instructions for syscall list generation match Makefile and
refer to `update-syscall-lists'; there has been no `update-arch-syscall'
target. Also use single quotes around the command to stick to the ASCII
character set.
Fixes 4cf0d22305 ("Linux: Add tables with system call numbers").
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
To provide a y2038 safe interface a new symbol __shmctl64 is added
and __shmctl is change to call it instead (it adds some extra buffer
copying for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_shmid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386,
mips, powerpc32, and sparc32) require specific implementations
due to their kernel ABI.
2. shmid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit shmctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes shmid_ds already contains
64-bit time_t fields and will result in just the __shmctl symbol
using the __shmctl64 code. The shmid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low time handling.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support
using of the 64-bit one.
The default 32-bit symbol will allocate and copy the shmid_ds
over multiple buffers, but this should be deprecated in favor
of the __shmctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Each architecture overrides the struct msqid_ds which its required
kernel ABI one.
Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa,
mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le,
powerpc64, and powerpc.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This will allow us to have architectures specify their own version.
Not semantic changes expected. Checked with a build against the
all affected ABIs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To provide a y2038 safe interface a new symbol __msgctl64 is added
and __msgctl is change to call it instead (it adds some extra buffer
coping for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_msqid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386, mips,
powerpc32, and sparc32) require specific implementations due to
their kernel ABI.
2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit msgctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes msqid_ds already contains
64-bit time_t fields and will result in just the __msgctl symbol
using the __msgctl64 code. The msgid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low time handling.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support using
the 64-bit time_t.
The default 32-bit symbol will allocate and copy the msqid_ds
over multiple buffers, but this should be deprecated in favor
of the __msgctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Each architecture overrides the struct msqid_ds which its required
kernel ABI one.
Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa,
mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le,
powerpc64, and powerpc.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
This will allow us to have architectures specify their own version.
Not semantic changes expected. Checked with a build against the
all affected ABIs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Different than others 64-bit time_t syscalls, the SysIPC interface
does not provide a new set of syscall for y2038 safeness. Instead it
uses unused fields in semid_ds structure to return the high bits for
the timestamps.
To provide a y2038 safe interface a new symbol __semctl64 is added
and __semctl is change to call it instead (it adds some extra buffer
copying for the 32 bit time_t implementation).
Two new structures are added:
1. kernel_semid64_ds: used internally only on 32-bit architectures
to issue the syscall. A handful of architectures (hppa, i386,
mips, powerpc32, sparc32) require specific implementations due
their kernel ABI.
2. semid_ds64: this is only for __TIMESIZE != 64 to use along with
the 64-bit semctl. It is different than the kernel struct because
the exported 64-bit time_t might require different alignment
depending on the architecture ABI.
So the resulting implementation does:
1. For 64-bit architectures it assumes semid_ds already contains
64-bit time_t fields and will result in just the __semctl symbol
using the __semctl64 code. The semid_ds argument is passed as-is
to the syscall.
2. For 32-bit architectures with default 64-bit time_t (newer ABIs
such riscv32 or arc), it will also result in only one exported
symbol but with the required high/low handling.
It might be possible to optimize it further to avoid the
kernel_semid64_ds to semun transformation if the exported ABI
for the architectures matches the expected kernel ABI, but the
implementation is already complex enough and don't think this
should be a hotspot in any case.
3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t
support we follow the already set way to provide one symbol with
64-bit time_t support and implement the 32-bit time_t support
using the 64-bit one.
The default 32-bit symbol will allocate and copy the semid_ds
over multiple buffers, but this should be deprecated in favor
of the __semctl64 anyway.
Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff
tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and
sparc64.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
