_key is not reserved name and we should avoid using that. It seems that
it was simple typo when pkey_* was implemented.
(cherry picked from commit 388ff7bd0d)
Since start.o may be compiled as PIC, we should check PIC instead of
SHARED.
[BZ #22638]
* sysdeps/sparc/sparc32/start.S (_start): Check PIC instead of
SHARED.
* sysdeps/sparc/sparc64/start.S (_start): Likewise.
(cherry picked from commit 371b220f62)
We don't have support for hp timing for now, even the i686 variant, which needs
to know the CPU speed.
Copied from sysdeps/generic/hp-timing.h
* sysdeps/mach/hurd/hp-timing.h: New file.
* hurd/Versions: Fix version when _hurd_exec_paths was added.
* mach/Versions: Fix version when __mach_host_self_ was added.
* sysdeps/mach/hurd/i386/ld.abilist: New file.
* sysdeps/mach/hurd/i386/libBrokenLocale.abilist: New file.
* sysdeps/mach/hurd/i386/libanl.abilist: New file.
* sysdeps/mach/hurd/i386/libc.abilist: New file.
* sysdeps/mach/hurd/i386/libcrypt.abilist: New file.
* sysdeps/mach/hurd/i386/libdl.abilist: New file.
* sysdeps/mach/hurd/i386/libm.abilist: New file.
* sysdeps/mach/hurd/i386/libnsl.abilist: New file.
* sysdeps/mach/hurd/i386/libresolv.abilist: New file.
* sysdeps/mach/hurd/i386/librt.abilist: New file.
* sysdeps/mach/hurd/i386/libutil.abilist: New file.
This contains a definition of __IPC_64 that matches the RISC-V Linux
ABI.
2018-01-29 Darius Rad <darius@bluespec.com>
* sysdeps/unix/sysv/linux/riscv/ipc_priv.h: New file.
This patch lays out the top-level orginazition of the RISC-V port. It
contains all the Implies files as well as various other fragments of
build infastructure for the RISC-V port. This contains the only change
to a shared file: config.h.in.
RISC-V is a family of base ISAs with optional extensions. The base ISAs
are RV32I and RV64I, which are 32-bit and 64-bit integer-only ISAs, but
this port currently only supports RV64I based systems. Support for
RISC-V lives in in sysdeps/riscv. In addition to these ISAs, our glibc
port supports most of the currently-defined extensions: the A extension
for atomics, the M extension for multiplication, the C extension for
compressed instructions, and the F/D extensions for single/double
precision IEEE floating-point. Most of these extensions are handled by
GCC, but glibc defines various floating-point wrappers and emulation
routines as well as some atomic wrappers.
We support running glibc-based programs on Linux, the support for which
lives in sysdeps/unix/sysv/linux/riscv.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/Implies: New file.
* sysdeps/riscv/Makefile: Likewise.
* sysdeps/riscv/configure: Likewise.
* sysdeps/riscv/configure.ac: Likewise.
* sysdeps/riscv/nptl/Makefile: Likewise.
* sysdeps/riscv/preconfigure: Likewise.
* sysdeps/riscv/rv64/Implies-after: Likewise.
* sysdeps/riscv/rv64/rvd/Implies: Likewise.
* sysdeps/riscv/rv64/rvf/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/Makefile: Likewise.
* sysdeps/unix/sysv/linux/riscv/Versions: Likewise.
* sysdeps/unix/sysv/linux/riscv/configure: Likewise.
* sysdeps/unix/sysv/linux/riscv/configure.ac: Likewise.
* sysdeps/unix/sysv/linux/riscv/ldd-rewrite.sed: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Implies: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Makefile: Likewise.
* sysdeps/unix/sysv/linux/riscv/shlib-versions: Likewise.
I started with the aarch64 ABI lists and manually went through each
difference, ensuring that the missing entries had been deprecated along
the line. Darius generated the ulps files by running the test cases on QEMU.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nofpu/libm-test-ulps: New file.
* sysdeps/riscv/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/riscv/rv64/rvd/libm-test-ulps: Likewise.
* sysdeps/riscv/rv64/rvd/libm-test-ulps-name: Likewise.
* sysdeps/unix/sysv/linux/riscv/localplt.data: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/c++-types.data: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libanl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libdl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libnsl.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/librt.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libutil.abilist: Likewise.
This contains the Linux-specific code for loading programs on RISC-V.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/unix/sysv/linux/riscv/dl-static.c: New file.
* sysdeps/unix/sysv/linux/riscv/ldconfig.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/ldsodefs.h: Likewise.
Contains the Linux system call interface, as well as the definitions of
a handful of system calls.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nptl/nptl-sysdep.S: New file.
* sysdeps/unix/sysv/linux/riscv/arch-fork.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/clone.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/pt-vfork.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/syscall.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.S: Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Likewise.
This patch implements various atomic and locking routines on RISC-V. We
mandate the A extension on Linux-capable RISC-V systems, so this can
rely on always having the various atomic instructions availiable.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/nptl/bits/pthreadtypes-arch.h: New file.
* sysdeps/riscv/nptl/bits/semaphore.h: Likewise.
* sysdeps/riscv/nptl/libc-lowlevellock.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/atomic-machine.h: Likewise.
This patch contains the miscellaneous math routines and headers we have
implemented for RISC-V. This includes things from <math.h> that aren't
completely ISA-generic, floating-point bit manipulation, and soft-fp
hooks.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/bits/fenv.h: New file.
* sysdeps/riscv/e_sqrtl.c: Likewise.
* sysdeps/riscv/fpu_control.h: Likewise.
* sysdeps/riscv/math-tests.h: Likewise.
* sysdeps/riscv/nofpu/Implies: Likewise.
* sysdeps/riscv/sfp-machine.h: Likewise.
* sysdeps/riscv/tininess.h: Likewise.
This patch implements TLS support for RISC-V. We support all four
standard TLS addressing modes (LE, IE, LD, and GD) when running on
Linux via NPTL. There is a draft psABI document that defines our TLS
ABI here
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#thread-local-storage
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/dl-tls.h: New file.
* sysdeps/riscv/libc-tls.c: Likewise.
* sysdeps/riscv/nptl/tcb-offsets.sym: Likewise.
* sysdeps/riscv/nptl/tls.h: Likewise.
* sysdeps/riscv/stackinfo.h: Likewise.
This patch contains code that needs to directly know about the RISC-V
ABI, which is specified in a work-in-progress psABI document:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
This is meant to contain all the RISC-V code that needs to explicitly
name registers or manage in-memory structure layout. This does not
contain any of the Linux-specific code.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/riscv/__longjmp.S: New file.
* sysdeps/riscv/backtrace.c: Likewise.
* sysdeps/riscv/bits/endian.h: Likewise.
* sysdeps/riscv/bits/setjmp.h: Likewise.
* sysdeps/riscv/bits/wordsize.h: Likewise.
* sysdeps/riscv/bsd-_setjmp.c: Likewise.
* sysdeps/riscv/bsd-setjmp.c: Likewise.
* sysdeps/riscv/dl-trampoline.S: Likewise.
* sysdeps/riscv/gccframe.h: Likewise.
* sysdeps/riscv/jmpbuf-offsets.h: Likewise.
* sysdeps/riscv/jmpbuf-unwind.h: Likewise.
* sysdeps/riscv/machine-gmon.h: Likewise.
* sysdeps/riscv/memusage.h: Likewise.
* sysdeps/riscv/setjmp.S: Likewise.
* sysdeps/riscv/sys/asm.h: Likewise.
* sysdeps/riscv/tls-macros.h: Likewise.
The RISC-V port contains a crti.S that simply contains a link to
PREINIT_FUNCTION (when defined). As this should be entirely generic,
Joseph Myers suggested that we update the generic init_array version to
contain this. Since RISC-V is the only user of init_array this won't
break any existing ports.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/init_array/crti.S (.section .init_array): Add
PREINIT_FUNCTION when defined.
copy_file_range syscall was added for microblaze in 4.10.
This patch makes the MicroBlaze kernel-features.h undefine
__ASSUME_COPY_FILE_RANGE for toolchains built with kernel headers < 4.10.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_COPY_FILE_RANGE) [__LINUX_KERNEL_VERSION < 0x040A00]: Undef.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=7181e5590e5ba898804aef3ee6be7f27606e6f8b
Signed-off-by: Romain Naour <romain.naour@gmail.com>
* sysdeps/mach/hurd/net/ethernet.h: Include <stdint.h>.
* sysdeps/mach/hurd/net/if_arp.h: Include <stdint.h>.
* sysdeps/mach/hurd/net/if_ppp.h: Do not include non-existing
<net/ppp_defs.h>.
_POSIX_CHOWN_RESTRICTED and _POSIX_NO_TRUNC should be always defined.
* sysdeps/mach/hurd/bits/posix_opt.h (_POSIX_CHOWN_RESTRICTED,
_POSIX_NO_TRUNC): Define to 0.
400669754d ('hurd: Fix nscd build') had the side effect of making
libc's freeaddrinfo expose freeifaddrs through __check_pf. We can just
move the renames to gai.c itself, along others.
* sysdeps/mach/hurd/check_pf.c (__getifaddrs, __freeifaddrs): Do not
define macros.
* nscd/gai.c (__getifaddrs): Define macro to getifaddrs.
(__freeifaddrs): Define macro to freeifaddrs.
* hurd/hurd.h (__hurd_fail): Always declare function, and provide inline
version only if __USE_EXTERN_INLINES is defined.
* hurd/hurd/fd.h (_hurd_fd_error_signal, _hurd_fd_error, __hurd_dfail,
__hurd_sockfail): Likewise.
(_hurd_fd_get): Always declare functions, and provide inline versions
only if __USE_EXTERN_INLINES and _LIBC are defined and IS_IN(libc).
* hurd/hurd/port.h (_hurd_port_init, _hurd_port_locked_get,
_hurd_port_get, _hurd_port_free, _hurd_port_locked_set,
_hurd_port_set): Always declare functions, and provide inline versions
only if __USE_EXTERN_INLINES and _LIBC are defined and
IS_IN(libc).
* hurd/hurd/signal.h (_hurd_self_sigstate, _hurd_critical_section_lock,
_hurd_critical_section_unlock): Likewise.
* hurd/hurd/threadvar.h (__hurd_threadvar_location_from_sp,
* __hurd_threadvar_location): Likewise.
* hurd/hurd/userlink.h (_hurd_userlink_link, _hurd_userlink_unlink,
_hurd_userlink_clear): Likewise.
* mach/lock-intern.h (__spin_lock_init, __spin_lock, __mutex_lock,
__mutex_unlock, __mutex_trylock): Always declare functions, and provide
inline versions only if __USE_EXTERN_INLINES and _LIBC are defined.
* mach/mach/mig_support.h (__mig_strncpy): Likewise.
* sysdeps/generic/machine-lock.h (__spin_unlock, __spin_try_lock,
__spin_lock_locked): Likewise.
* sysdeps/mach/i386/machine-lock.h (__spin_unlock, __spin_try_lock,
__spin_lock_locked): Likewise.
* mach/spin-lock.c (__USE_EXTERN_INLINES): Define to 1.
* hurd/Versions (libc: GLIBC_2.27): Add _hurd_fd_error_signal,
_hurd_fd_error, __hurd_dfail, __hurd_sockfail, _hurd_port_locked_set,
__hurd_threadvar_location_from_sp, __hurd_threadvar_location,
_hurd_userlink_link, _hurd_userlink_unlink, _hurd_userlink_clear.
* sysdeps/mach/hurd/getresgid.c (__getresgid): Set result from
critical section to make code simpler and avoid warning.
* sysdeps/mach/hurd/getresuid.c (__getresuid): Set result from
critical section to make code simpler and avoid warning.
Making `special_profil_failure' both avoids warning "variable
'special_profil_failure' set but not used", and makes it easier to
access with gdb.
* sysdeps/mach/hurd/profil.c (special_profil_failure): Move variable
to global scope.
This was dropped from GNU Mach in 2006.
* mach/Machrules (MIGFLAGS): Do not set -DMACH_IPC_COMPAT=0.
* mach/mach/mach_traps.h: Drop comment about MACH_IPC_COMPAT.
* sysdeps/mach/hurd/fork.c (__fork): Drop special casing
MACH_IPC_COMPAT.
timer_ptr2id and timer_id2ptr are used to convert between
application-visible timer_t and struct timer_node *. timer_ptr2id was made
to use void * instead of timer_t in 49b650430e ('Update.') for no reason.
It happens that on Linux timer_t is void *, so both that change and this
commit are no-ops there, but not on systems where timer_t is not void *.
Using timer_ptr2id for filling sival_ptr also does not make sense since that
actually is a void *.
* sysdeps/pthread/posix-timer.h (timer_ptr2id): Cast to timer_t
instead of void *.
* sysdeps/pthread/timer_create.c (timer_create): Do not use
timer_ptr2id to cast struct timer_node * to void *.
