/* Copyright (C) 2002-2021 Free Software Foundation, Inc. This file is part of the GNU C Library. Contributed by Ulrich Drepper , 2002. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, see . */ #include #include #include #include #include #include #include "pthreadP.h" #include #include #include #include #include #include #include #include #include #include #include #include "libioP.h" #include #include #include /* Globally enabled events. */ static td_thr_events_t __nptl_threads_events __attribute_used__; /* Pointer to descriptor with the last event. */ static struct pthread *__nptl_last_event __attribute_used__; #ifdef SHARED /* This variable is used to access _rtld_global from libthread_db. If GDB loads libpthread before ld.so, it is not possible to resolve _rtld_global directly during libpthread initialization. */ static struct rtld_global *__nptl_rtld_global __attribute_used__ = &_rtld_global; #endif /* This performs the initialization necessary when going from single-threaded to multi-threaded mode for the first time. */ static void late_init (void) { struct sigaction sa; __sigemptyset (&sa.sa_mask); /* Install the cancellation signal handler (in static builds only if pthread_cancel has been linked in). If for some reason we cannot install the handler we do not abort. Maybe we should, but it is only asynchronous cancellation which is affected. */ #ifndef SHARED extern __typeof (__nptl_sigcancel_handler) __nptl_sigcancel_handler __attribute__ ((weak)); if (__nptl_sigcancel_handler != NULL) #endif { sa.sa_sigaction = __nptl_sigcancel_handler; sa.sa_flags = SA_SIGINFO; (void) __libc_sigaction (SIGCANCEL, &sa, NULL); } /* Install the handle to change the threads' uid/gid. */ sa.sa_sigaction = __nptl_setxid_sighandler; sa.sa_flags = SA_SIGINFO | SA_RESTART; (void) __libc_sigaction (SIGSETXID, &sa, NULL); /* The parent process might have left the signals blocked. Just in case, unblock it. We reuse the signal mask in the sigaction structure. It is already cleared. */ __sigaddset (&sa.sa_mask, SIGCANCEL); __sigaddset (&sa.sa_mask, SIGSETXID); INTERNAL_SYSCALL_CALL (rt_sigprocmask, SIG_UNBLOCK, &sa.sa_mask, NULL, __NSIG_BYTES); } /* Code to allocate and deallocate a stack. */ #include "allocatestack.c" /* CONCURRENCY NOTES: Understanding who is the owner of the 'struct pthread' or 'PD' (refers to the value of the 'struct pthread *pd' function argument) is critically important in determining exactly which operations are allowed and which are not and when, particularly when it comes to the implementation of pthread_create, pthread_join, pthread_detach, and other functions which all operate on PD. The owner of PD is responsible for freeing the final resources associated with PD, and may examine the memory underlying PD at any point in time until it frees it back to the OS or to reuse by the runtime. The thread which calls pthread_create is called the creating thread. The creating thread begins as the owner of PD. During startup the new thread may examine PD in coordination with the owner thread (which may be itself). The four cases of ownership transfer are: (1) Ownership of PD is released to the process (all threads may use it) after the new thread starts in a joinable state i.e. pthread_create returns a usable pthread_t. (2) Ownership of PD is released to the new thread starting in a detached state. (3) Ownership of PD is dynamically released to a running thread via pthread_detach. (4) Ownership of PD is acquired by the thread which calls pthread_join. Implementation notes: The PD->stopped_start and thread_ran variables are used to determine exactly which of the four ownership states we are in and therefore what actions can be taken. For example after (2) we cannot read or write from PD anymore since the thread may no longer exist and the memory may be unmapped. It is important to point out that PD->lock is being used both similar to a one-shot semaphore and subsequently as a mutex. The lock is taken in the parent to force the child to wait, and then the child releases the lock. However, this semaphore-like effect is used only for synchronizing the parent and child. After startup the lock is used like a mutex to create a critical section during which a single owner modifies the thread parameters. The most complicated cases happen during thread startup: (a) If the created thread is in a detached (PTHREAD_CREATE_DETACHED), or joinable (default PTHREAD_CREATE_JOINABLE) state and STOPPED_START is true, then the creating thread has ownership of PD until the PD->lock is released by pthread_create. If any errors occur we are in states (c), (d), or (e) below. (b) If the created thread is in a detached state (PTHREAD_CREATED_DETACHED), and STOPPED_START is false, then the creating thread has ownership of PD until it invokes the OS kernel's thread creation routine. If this routine returns without error, then the created thread owns PD; otherwise, see (c) and (e) below. (c) If the detached thread setup failed and THREAD_RAN is true, then the creating thread releases ownership to the new thread by sending a cancellation signal. All threads set THREAD_RAN to true as quickly as possible after returning from the OS kernel's thread creation routine. (d) If the joinable thread setup failed and THREAD_RAN is true, then then the creating thread retains ownership of PD and must cleanup state. Ownership cannot be released to the process via the return of pthread_create since a non-zero result entails PD is undefined and therefore cannot be joined to free the resources. We privately call pthread_join on the thread to finish handling the resource shutdown (Or at least we should, see bug 19511). (e) If the thread creation failed and THREAD_RAN is false, then the creating thread retains ownership of PD and must cleanup state. No waiting for the new thread is required because it never started. The nptl_db interface: The interface with nptl_db requires that we enqueue PD into a linked list and then call a function which the debugger will trap. The PD will then be dequeued and control returned to the thread. The caller at the time must have ownership of PD and such ownership remains after control returns to thread. The enqueued PD is removed from the linked list by the nptl_db callback td_thr_event_getmsg. The debugger must ensure that the thread does not resume execution, otherwise ownership of PD may be lost and examining PD will not be possible. Note that the GNU Debugger as of (December 10th 2015) commit c2c2a31fdb228d41ce3db62b268efea04bd39c18 no longer uses td_thr_event_getmsg and several other related nptl_db interfaces. The principal reason for this is that nptl_db does not support non-stop mode where other threads can run concurrently and modify runtime structures currently in use by the debugger and the nptl_db interface. Axioms: * The create_thread function can never set stopped_start to false. * The created thread can read stopped_start but never write to it. * The variable thread_ran is set some time after the OS thread creation routine returns, how much time after the thread is created is unspecified, but it should be as quickly as possible. */ /* CREATE THREAD NOTES: createthread.c defines the create_thread function, and two macros: START_THREAD_DEFN and START_THREAD_SELF (see below). create_thread must initialize PD->stopped_start. It should be true if the STOPPED_START parameter is true, or if create_thread needs the new thread to synchronize at startup for some other implementation reason. If STOPPED_START will be true, then create_thread is obliged to lock PD->lock before starting the thread. Then pthread_create unlocks PD->lock which synchronizes-with START_THREAD_DEFN in the child thread which does an acquire/release of PD->lock as the last action before calling the user entry point. The goal of all of this is to ensure that the required initial thread attributes are applied (by the creating thread) before the new thread runs user code. Note that the the functions pthread_getschedparam, pthread_setschedparam, pthread_setschedprio, __pthread_tpp_change_priority, and __pthread_current_priority reuse the same lock, PD->lock, for a similar purpose e.g. synchronizing the setting of similar thread attributes. These functions are never called before the thread is created, so don't participate in startup syncronization, but given that the lock is present already and in the unlocked state, reusing it saves space. The return value is zero for success or an errno code for failure. If the return value is ENOMEM, that will be translated to EAGAIN, so create_thread need not do that. On failure, *THREAD_RAN should be set to true iff the thread actually started up and then got canceled before calling user code (*PD->start_routine). */ static int create_thread (struct pthread *pd, const struct pthread_attr *attr, bool *stopped_start, STACK_VARIABLES_PARMS, bool *thread_ran); #include /* Local function to start thread and handle cleanup. createthread.c defines the macro START_THREAD_DEFN to the declaration that its create_thread function will refer to, and START_THREAD_SELF to the expression to optimally deliver the new thread's THREAD_SELF value. */ START_THREAD_DEFN { struct pthread *pd = START_THREAD_SELF; /* Initialize resolver state pointer. */ __resp = &pd->res; /* Initialize pointers to locale data. */ __ctype_init (); #ifndef __ASSUME_SET_ROBUST_LIST if (__nptl_set_robust_list_avail) #endif { /* This call should never fail because the initial call in init.c succeeded. */ INTERNAL_SYSCALL_CALL (set_robust_list, &pd->robust_head, sizeof (struct robust_list_head)); } /* This is where the try/finally block should be created. For compilers without that support we do use setjmp. */ struct pthread_unwind_buf unwind_buf; int not_first_call; DIAG_PUSH_NEEDS_COMMENT; #if __GNUC_PREREQ (7, 0) /* This call results in a -Wstringop-overflow warning because struct pthread_unwind_buf is smaller than jmp_buf. setjmp and longjmp do not use anything beyond the common prefix (they never access the saved signal mask), so that is a false positive. */ DIAG_IGNORE_NEEDS_COMMENT (11, "-Wstringop-overflow="); #endif not_first_call = setjmp ((struct __jmp_buf_tag *) unwind_buf.cancel_jmp_buf); DIAG_POP_NEEDS_COMMENT; /* No previous handlers. NB: This must be done after setjmp since the private space in the unwind jump buffer may overlap space used by setjmp to store extra architecture-specific information which is never used by the cancellation-specific __libc_unwind_longjmp. The private space is allowed to overlap because the unwinder never has to return through any of the jumped-to call frames, and thus only a minimum amount of saved data need be stored, and for example, need not include the process signal mask information. This is all an optimization to reduce stack usage when pushing cancellation handlers. */ unwind_buf.priv.data.prev = NULL; unwind_buf.priv.data.cleanup = NULL; __libc_signal_restore_set (&pd->sigmask); /* Allow setxid from now onwards. */ if (__glibc_unlikely (atomic_exchange_acq (&pd->setxid_futex, 0) == -2)) futex_wake (&pd->setxid_futex, 1, FUTEX_PRIVATE); if (__glibc_likely (! not_first_call)) { /* Store the new cleanup handler info. */ THREAD_SETMEM (pd, cleanup_jmp_buf, &unwind_buf); /* We are either in (a) or (b), and in either case we either own PD already (2) or are about to own PD (1), and so our only restriction would be that we can't free PD until we know we have ownership (see CONCURRENCY NOTES above). */ if (__glibc_unlikely (pd->stopped_start)) { int oldtype = LIBC_CANCEL_ASYNC (); /* Get the lock the parent locked to force synchronization. */ lll_lock (pd->lock, LLL_PRIVATE); /* We have ownership of PD now. */ /* And give it up right away. */ lll_unlock (pd->lock, LLL_PRIVATE); LIBC_CANCEL_RESET (oldtype); } LIBC_PROBE (pthread_start, 3, (pthread_t) pd, pd->start_routine, pd->arg); /* Run the code the user provided. */ void *ret; if (pd->c11) { /* The function pointer of the c11 thread start is cast to an incorrect type on __pthread_create_2_1 call, however it is casted back to correct one so the call behavior is well-defined (it is assumed that pointers to void are able to represent all values of int. */ int (*start)(void*) = (int (*) (void*)) pd->start_routine; ret = (void*) (uintptr_t) start (pd->arg); } else ret = pd->start_routine (pd->arg); THREAD_SETMEM (pd, result, ret); } /* Call destructors for the thread_local TLS variables. */ #ifndef SHARED if (&__call_tls_dtors != NULL) #endif __call_tls_dtors (); /* Run the destructor for the thread-local data. */ __nptl_deallocate_tsd (); /* Clean up any state libc stored in thread-local variables. */ __libc_thread_freeres (); /* If this is the last thread we terminate the process now. We do not notify the debugger, it might just irritate it if there is no thread left. */ if (__glibc_unlikely (atomic_decrement_and_test (&__nptl_nthreads))) /* This was the last thread. */ exit (0); /* Report the death of the thread if this is wanted. */ if (__glibc_unlikely (pd->report_events)) { /* See whether TD_DEATH is in any of the mask. */ const int idx = __td_eventword (TD_DEATH); const uint32_t mask = __td_eventmask (TD_DEATH); if ((mask & (__nptl_threads_events.event_bits[idx] | pd->eventbuf.eventmask.event_bits[idx])) != 0) { /* Yep, we have to signal the death. Add the descriptor to the list but only if it is not already on it. */ if (pd->nextevent == NULL) { pd->eventbuf.eventnum = TD_DEATH; pd->eventbuf.eventdata = pd; do pd->nextevent = __nptl_last_event; while (atomic_compare_and_exchange_bool_acq (&__nptl_last_event, pd, pd->nextevent)); } /* Now call the function which signals the event. See CONCURRENCY NOTES for the nptl_db interface comments. */ __nptl_death_event (); } } /* The thread is exiting now. Don't set this bit until after we've hit the event-reporting breakpoint, so that td_thr_get_info on us while at the breakpoint reports TD_THR_RUN state rather than TD_THR_ZOMBIE. */ atomic_bit_set (&pd->cancelhandling, EXITING_BIT); #ifndef __ASSUME_SET_ROBUST_LIST /* If this thread has any robust mutexes locked, handle them now. */ # if __PTHREAD_MUTEX_HAVE_PREV void *robust = pd->robust_head.list; # else __pthread_slist_t *robust = pd->robust_list.__next; # endif /* We let the kernel do the notification if it is able to do so. If we have to do it here there for sure are no PI mutexes involved since the kernel support for them is even more recent. */ if (!__nptl_set_robust_list_avail && __builtin_expect (robust != (void *) &pd->robust_head, 0)) { do { struct __pthread_mutex_s *this = (struct __pthread_mutex_s *) ((char *) robust - offsetof (struct __pthread_mutex_s, __list.__next)); robust = *((void **) robust); # if __PTHREAD_MUTEX_HAVE_PREV this->__list.__prev = NULL; # endif this->__list.__next = NULL; atomic_or (&this->__lock, FUTEX_OWNER_DIED); futex_wake ((unsigned int *) &this->__lock, 1, /* XYZ */ FUTEX_SHARED); } while (robust != (void *) &pd->robust_head); } #endif if (!pd->user_stack) advise_stack_range (pd->stackblock, pd->stackblock_size, (uintptr_t) pd, pd->guardsize); if (__glibc_unlikely (pd->cancelhandling & SETXID_BITMASK)) { /* Some other thread might call any of the setXid functions and expect us to reply. In this case wait until we did that. */ do /* XXX This differs from the typical futex_wait_simple pattern in that the futex_wait condition (setxid_futex) is different from the condition used in the surrounding loop (cancelhandling). We need to check and document why this is correct. */ futex_wait_simple (&pd->setxid_futex, 0, FUTEX_PRIVATE); while (pd->cancelhandling & SETXID_BITMASK); /* Reset the value so that the stack can be reused. */ pd->setxid_futex = 0; } /* If the thread is detached free the TCB. */ if (IS_DETACHED (pd)) /* Free the TCB. */ __nptl_free_tcb (pd); /* We cannot call '_exit' here. '_exit' will terminate the process. The 'exit' implementation in the kernel will signal when the process is really dead since 'clone' got passed the CLONE_CHILD_CLEARTID flag. The 'tid' field in the TCB will be set to zero. The exit code is zero since in case all threads exit by calling 'pthread_exit' the exit status must be 0 (zero). */ __exit_thread (); /* NOTREACHED */ } /* Return true iff obliged to report TD_CREATE events. */ static bool report_thread_creation (struct pthread *pd) { if (__glibc_unlikely (THREAD_GETMEM (THREAD_SELF, report_events))) { /* The parent thread is supposed to report events. Check whether the TD_CREATE event is needed, too. */ const size_t idx = __td_eventword (TD_CREATE); const uint32_t mask = __td_eventmask (TD_CREATE); return ((mask & (__nptl_threads_events.event_bits[idx] | pd->eventbuf.eventmask.event_bits[idx])) != 0); } return false; } int __pthread_create_2_1 (pthread_t *newthread, const pthread_attr_t *attr, void *(*start_routine) (void *), void *arg) { STACK_VARIABLES; /* Avoid a data race in the multi-threaded case, and call the deferred initialization only once. */ if (__libc_single_threaded) { late_init (); __libc_single_threaded = 0; } const struct pthread_attr *iattr = (struct pthread_attr *) attr; union pthread_attr_transparent default_attr; bool destroy_default_attr = false; bool c11 = (attr == ATTR_C11_THREAD); if (iattr == NULL || c11) { int ret = __pthread_getattr_default_np (&default_attr.external); if (ret != 0) return ret; destroy_default_attr = true; iattr = &default_attr.internal; } struct pthread *pd = NULL; int err = ALLOCATE_STACK (iattr, &pd); int retval = 0; if (__glibc_unlikely (err != 0)) /* Something went wrong. Maybe a parameter of the attributes is invalid or we could not allocate memory. Note we have to translate error codes. */ { retval = err == ENOMEM ? EAGAIN : err; goto out; } /* Initialize the TCB. All initializations with zero should be performed in 'get_cached_stack'. This way we avoid doing this if the stack freshly allocated with 'mmap'. */ #if TLS_TCB_AT_TP /* Reference to the TCB itself. */ pd->header.self = pd; /* Self-reference for TLS. */ pd->header.tcb = pd; #endif /* Store the address of the start routine and the parameter. Since we do not start the function directly the stillborn thread will get the information from its thread descriptor. */ pd->start_routine = start_routine; pd->arg = arg; pd->c11 = c11; /* Copy the thread attribute flags. */ struct pthread *self = THREAD_SELF; pd->flags = ((iattr->flags & ~(ATTR_FLAG_SCHED_SET | ATTR_FLAG_POLICY_SET)) | (self->flags & (ATTR_FLAG_SCHED_SET | ATTR_FLAG_POLICY_SET))); /* Initialize the field for the ID of the thread which is waiting for us. This is a self-reference in case the thread is created detached. */ pd->joinid = iattr->flags & ATTR_FLAG_DETACHSTATE ? pd : NULL; /* The debug events are inherited from the parent. */ pd->eventbuf = self->eventbuf; /* Copy the parent's scheduling parameters. The flags will say what is valid and what is not. */ pd->schedpolicy = self->schedpolicy; pd->schedparam = self->schedparam; /* Copy the stack guard canary. */ #ifdef THREAD_COPY_STACK_GUARD THREAD_COPY_STACK_GUARD (pd); #endif /* Copy the pointer guard value. */ #ifdef THREAD_COPY_POINTER_GUARD THREAD_COPY_POINTER_GUARD (pd); #endif /* Setup tcbhead. */ tls_setup_tcbhead (pd); /* Verify the sysinfo bits were copied in allocate_stack if needed. */ #ifdef NEED_DL_SYSINFO CHECK_THREAD_SYSINFO (pd); #endif /* Determine scheduling parameters for the thread. */ if (__builtin_expect ((iattr->flags & ATTR_FLAG_NOTINHERITSCHED) != 0, 0) && (iattr->flags & (ATTR_FLAG_SCHED_SET | ATTR_FLAG_POLICY_SET)) != 0) { /* Use the scheduling parameters the user provided. */ if (iattr->flags & ATTR_FLAG_POLICY_SET) { pd->schedpolicy = iattr->schedpolicy; pd->flags |= ATTR_FLAG_POLICY_SET; } if (iattr->flags & ATTR_FLAG_SCHED_SET) { /* The values were validated in pthread_attr_setschedparam. */ pd->schedparam = iattr->schedparam; pd->flags |= ATTR_FLAG_SCHED_SET; } if ((pd->flags & (ATTR_FLAG_SCHED_SET | ATTR_FLAG_POLICY_SET)) != (ATTR_FLAG_SCHED_SET | ATTR_FLAG_POLICY_SET)) collect_default_sched (pd); } if (__glibc_unlikely (__nptl_nthreads == 1)) _IO_enable_locks (); /* Pass the descriptor to the caller. */ *newthread = (pthread_t) pd; LIBC_PROBE (pthread_create, 4, newthread, attr, start_routine, arg); /* One more thread. We cannot have the thread do this itself, since it might exist but not have been scheduled yet by the time we've returned and need to check the value to behave correctly. We must do it before creating the thread, in case it does get scheduled first and then might mistakenly think it was the only thread. In the failure case, we momentarily store a false value; this doesn't matter because there is no kosher thing a signal handler interrupting us right here can do that cares whether the thread count is correct. */ atomic_increment (&__nptl_nthreads); /* Our local value of stopped_start and thread_ran can be accessed at any time. The PD->stopped_start may only be accessed if we have ownership of PD (see CONCURRENCY NOTES above). */ bool stopped_start = false; bool thread_ran = false; /* Block all signals, so that the new thread starts out with signals disabled. This avoids race conditions in the thread startup. */ sigset_t original_sigmask; __libc_signal_block_all (&original_sigmask); if (iattr->extension != NULL && iattr->extension->sigmask_set) /* Use the signal mask in the attribute. The internal signals have already been filtered by the public pthread_attr_setsigmask_np interface. */ pd->sigmask = iattr->extension->sigmask; else { /* Conceptually, the new thread needs to inherit the signal mask of this thread. Therefore, it needs to restore the saved signal mask of this thread, so save it in the startup information. */ pd->sigmask = original_sigmask; /* Reset the cancellation signal mask in case this thread is running cancellation. */ __sigdelset (&pd->sigmask, SIGCANCEL); } /* Start the thread. */ if (__glibc_unlikely (report_thread_creation (pd))) { stopped_start = true; /* We always create the thread stopped at startup so we can notify the debugger. */ retval = create_thread (pd, iattr, &stopped_start, STACK_VARIABLES_ARGS, &thread_ran); if (retval == 0) { /* We retain ownership of PD until (a) (see CONCURRENCY NOTES above). */ /* Assert stopped_start is true in both our local copy and the PD copy. */ assert (stopped_start); assert (pd->stopped_start); /* Now fill in the information about the new thread in the newly created thread's data structure. We cannot let the new thread do this since we don't know whether it was already scheduled when we send the event. */ pd->eventbuf.eventnum = TD_CREATE; pd->eventbuf.eventdata = pd; /* Enqueue the descriptor. */ do pd->nextevent = __nptl_last_event; while (atomic_compare_and_exchange_bool_acq (&__nptl_last_event, pd, pd->nextevent) != 0); /* Now call the function which signals the event. See CONCURRENCY NOTES for the nptl_db interface comments. */ __nptl_create_event (); } } else retval = create_thread (pd, iattr, &stopped_start, STACK_VARIABLES_ARGS, &thread_ran); /* Return to the previous signal mask, after creating the new thread. */ __libc_signal_restore_set (&original_sigmask); if (__glibc_unlikely (retval != 0)) { if (thread_ran) /* State (c) or (d) and we may not have PD ownership (see CONCURRENCY NOTES above). We can assert that STOPPED_START must have been true because thread creation didn't fail, but thread attribute setting did. */ /* See bug 19511 which explains why doing nothing here is a resource leak for a joinable thread. */ assert (stopped_start); else { /* State (e) and we have ownership of PD (see CONCURRENCY NOTES above). */ /* Oops, we lied for a second. */ atomic_decrement (&__nptl_nthreads); /* Perhaps a thread wants to change the IDs and is waiting for this stillborn thread. */ if (__glibc_unlikely (atomic_exchange_acq (&pd->setxid_futex, 0) == -2)) futex_wake (&pd->setxid_futex, 1, FUTEX_PRIVATE); /* Free the resources. */ __nptl_deallocate_stack (pd); } /* We have to translate error codes. */ if (retval == ENOMEM) retval = EAGAIN; } else { /* We don't know if we have PD ownership. Once we check the local stopped_start we'll know if we're in state (a) or (b) (see CONCURRENCY NOTES above). */ if (stopped_start) /* State (a), we own PD. The thread blocked on this lock either because we're doing TD_CREATE event reporting, or for some other reason that create_thread chose. Now let it run free. */ lll_unlock (pd->lock, LLL_PRIVATE); /* We now have for sure more than one thread. The main thread might not yet have the flag set. No need to set the global variable again if this is what we use. */ THREAD_SETMEM (THREAD_SELF, header.multiple_threads, 1); } out: if (destroy_default_attr) __pthread_attr_destroy (&default_attr.external); return retval; } versioned_symbol (libpthread, __pthread_create_2_1, pthread_create, GLIBC_2_1); #if SHLIB_COMPAT(libpthread, GLIBC_2_0, GLIBC_2_1) int __pthread_create_2_0 (pthread_t *newthread, const pthread_attr_t *attr, void *(*start_routine) (void *), void *arg) { /* The ATTR attribute is not really of type `pthread_attr_t *'. It has the old size and access to the new members might crash the program. We convert the struct now. */ struct pthread_attr new_attr; if (attr != NULL) { struct pthread_attr *iattr = (struct pthread_attr *) attr; size_t ps = __getpagesize (); /* Copy values from the user-provided attributes. */ new_attr.schedparam = iattr->schedparam; new_attr.schedpolicy = iattr->schedpolicy; new_attr.flags = iattr->flags; /* Fill in default values for the fields not present in the old implementation. */ new_attr.guardsize = ps; new_attr.stackaddr = NULL; new_attr.stacksize = 0; new_attr.extension = NULL; /* We will pass this value on to the real implementation. */ attr = (pthread_attr_t *) &new_attr; } return __pthread_create_2_1 (newthread, attr, start_routine, arg); } compat_symbol (libpthread, __pthread_create_2_0, pthread_create, GLIBC_2_0); #endif /* Information for libthread_db. */ #include "../nptl_db/db_info.c" /* If pthread_create is present, libgcc_eh.a and libsupc++.a expects some other POSIX thread functions to be present as well. */ PTHREAD_STATIC_FN_REQUIRE (__pthread_mutex_lock) PTHREAD_STATIC_FN_REQUIRE (__pthread_mutex_trylock) PTHREAD_STATIC_FN_REQUIRE (__pthread_mutex_unlock) PTHREAD_STATIC_FN_REQUIRE (__pthread_once) PTHREAD_STATIC_FN_REQUIRE (__pthread_cancel) PTHREAD_STATIC_FN_REQUIRE (__pthread_key_create) PTHREAD_STATIC_FN_REQUIRE (__pthread_key_delete) PTHREAD_STATIC_FN_REQUIRE (__pthread_setspecific) PTHREAD_STATIC_FN_REQUIRE (__pthread_getspecific)