glibc/Makeconfig
Roland McGrath aa1075ea2f Sun May 12 11:16:58 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu>
* mach/Machrules (%.udeps rule): Write deps for %_server.[ch] too.
	(%_server.[ch] rule): Don't depend on %.defs; use #include to get
	installed .defs file.

	* stdio-common/vfprintf.c (flockfile, funlockfile): Define to
	nothing for stdio.  Fix fUNlockfile -> funlockfile for libio.
	* stdio-common/vfscanf.c: Likewise.

Sat May 11 13:43:41 1996  Roland McGrath  <roland@delasyd.gnu.ai.mit.edu>

	* hurd/hurdfault.c: Include faultexc_server.h instead of faultexc.h.

	* mach/Machrules (%.ir rule): Don't produce deps for imports.

	* elf/dl-fini.c (_dl_fini): Clear L->l_init_called after calling fn.

	* Makerules (install): Depend on $(slibdir)/libc.so$(libc.so-version).
	[!subdir] ($(libdir)/libc.so, $(common-objpfx)/libc-syms.so): Protect
	these targets and install dep on $(libdir)/libc.so with this.

	* hurd/Makefile: Removed all rules and defns for using code from Hurd
	sources and installing headers from there.

	* sysdeps/mach/hurd/errnos.awk: Set in_mach_errors to FILENAME when we
 	set it.  In Mach error matching clause, only match if FILENAME is
 	still the same value.

	* sysdeps/mach/hurd/Makefile: Don't include sysdeps/mach/Makefile;
	$(mach-srcdir) no longer exists.
	(hurd-srcdir): Variable removed.
	(includes): Don't append -I$(hurd-srcdir).
	(last-includes): Variable removed.
	Remove vpath specs using $(hurd-srcdir).
	(mach-errno-h): New canned sequence.
	($(common-objpfx)errnos.d): New target, generated included makefile
	to determine absolute file names of Mach headers to search for error
	codes and set variable mach-errnos-deps.
	($(common-objpfx)stamp-errnos): Depend on $(mach-errnos-deps) instead
	of prior explicit list.
	(generated): Add errnos.d, stamp-errnos.

	* mach/Machrules (some-if-rtn): New variable and target; compute deps
	of some if routine and make all if routines depend on that .d file
	instead of static list of .h files.

	* mach/Makefile (mach/mach_interface.defs,
	mach/memory_object_user.defs): Targets removed.
	($(objpfx)mach-syscalls.mk): Tweak this kludge so it doesn't depend
	directly on Mach sources.

	* sysdeps/mach/Makefile (mach-srcdir): Variable removed.
	(includes): Don't append -I$(mach-srcdir).
	Remove vpath specs using $(mach-srcdir).

	* hurd/Makefile (server-interfaces): Add faultexc.
	(sig): Remove it from here.
	(fault%.[ch]): Rule removed.
	(MIGFLAGS-faultexc): New variable.

	* hurd/faultexc.defs: New file.

	* mach/Machrules (%.ustamp rule): Pass $(MIGFLAGS-$*) to mig.
	(%_server.[ch] rule): Likewise.

	* mach/Makefile: Removed all rules and defns for using code from Mach
	sources and installing headers from there.

	* Makeconfig [$(build-shared)=yes] (link-libc): Append
	$(libc.so-version) to libc.so.

	* mach/Machrules (%.ustamp rule): Don't depend on %.defs.
	(%.udeps): New rule parallel to that one, generating included
	makefiles with -M output from `#include <%.defs>'.

	* Makerules (sed-remove-objpfx): Remove space before \ at eol.
1996-05-12 16:38:08 +00:00

485 lines
14 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Copyright (C) 1991, 92, 93, 94, 95, 96 Free Software Foundation, Inc.
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public License as
# published by the Free Software Foundation; either version 2 of the
# License, or (at your option) any later version.
# The GNU C Library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Library General Public License for more details.
# You should have received a copy of the GNU Library General Public
# License along with the GNU C Library; see the file COPYING.LIB. If
# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
# Cambridge, MA 02139, USA.
#
# Makefile configuration options for the GNU C library.
#
ifneq (,)
This makefile requires GNU Make.
endif
ifneq "$(origin +included-Makeconfig)" "file"
+included-Makeconfig := yes
ifdef subdir
.. := ../
endif
# If config.make exists, the source directory was configured,
# so don't try to be clever and find another directory to build in.
ifneq (,$(wildcard $(..)config.make))
ARCH =
machine =
else # Not configured.
ifndef ARCH
ifdef machine
ARCH = $(machine)
endif # machine
endif # ARCH
endif # config.make
# Directory for object files and libc.a. If this is not defined, the
# object files live in the subdirectories where their sources live, and
# libc.a lives in the parent directory (this probably doesn't work any
# more).
ifdef ARCH
ifeq ($(filter /%,$(ARCH)),)
objdir := $(..)$(ARCH)
else
objdir = $(ARCH)
endif
endif
# $(common-objdir) is the place to put objects and
# such that are not specific to a single subdir.
ifdef objdir
objpfx = $(objdir)/
common-objpfx = $(objpfx)
common-objdir = $(objdir)
else
objpfx :=
ifdef ..
common-objpfx = $(..)
common-objdir = ..
else
# This is a kludge. make wizards might grok.
common-objpfx = sysdeps/../
common-objdir = .
endif
endif
# Get the values defined by options to `configure'.
include $(common-objpfx)config.make
# Run config.status to update config.make and config.h. We don't show the
# dependence of config.h to Make, because it is only touched when it
# changes and so config.status would be run every time; the dependence of
# config.make should suffice to force regeneration and re-exec, and the new
# image will notice if config.h changed.
$(common-objpfx)config.make: $(common-objpfx)config.status $(..)config.h.in
cd $(<D); $(SHELL) $(<F)
# Force the user to configure before making.
$(common-objpfx)config.status: $(..)configure
@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
echo The GNU C library has not been configured. >&2; \
echo Run \`configure\' to configure it before building. >&2; \
echo Try \`configure --help\' for more details. >&2; \
exit 1; fi
# Get the user's configuration parameters.
ifneq ($(wildcard $(..)configparms),)
include $(..)configparms
endif
ifneq ($(objpfx),)
ifneq ($(wildcard $(objpfx)configparms),)
include $(objpfx)configparms
endif
endif
sysdep_dir := $(..)sysdeps
export sysdep_dir := $(sysdep_dir)
####
#### These are the configuration variables. You can define values for
#### the variables below in the file `configparms'.
#### Do NOT edit this file.
####
# Set this to either `stdio' or `libio', to compile in either GNU stdio
# or GNU libio.
ifndef stdio
stdio = stdio
endif
# Common prefix for machine-independent installation directories.
ifeq ($(origin prefix),undefined) # ifndef would override explicit empty value.
prefix = /usr/local
endif
# Common prefix for machine-dependent installation directories.
ifeq ($(origin exec_prefix),undefined)
exec_prefix = $(prefix)
endif
# Where to install the library and object files.
ifndef libdir
libdir = $(exec_prefix)/lib
endif
# Where to install the shared library and dynamic linker.
ifndef slibdir
slibdir = $(exec_prefix)/lib
endif
# Prefix to put on files installed in $(libdir). For libraries `libNAME.a',
# the prefix is spliced between `lib' and the name, so the linker switch
# `-l$(libprefix)NAME' finds the library; for other files the prefix is
# just prepended to the whole file name.
ifeq ($(origin libprefix),undefined)
libprefix =
endif
# Where to install the header files.
ifndef includedir
includedir = $(exec_prefix)/include
endif
# Where to install machine-independent data files.
# These are the timezone database, and the locale database.
ifndef datadir
datadir = $(prefix)/share
endif
# Where to install the timezone data files (which are machine-independent).
ifndef zonedir
zonedir = $(datadir)/zoneinfo
endif
# Where to install the locale and message catalog data files (which are
# machine-independent).
ifndef localedir
localedir = $(datadir)/locale
endif
# Where to install the locale charmap source files.
ifndef i18ndir
i18ndir = $(datadir)/i18n
endif
# Where to install programs.
ifndef bindir
bindir = $(exec_prefix)/bin
endif
# Where to install administrative programs.
ifndef sbindir
sbindir = $(exec_prefix)/sbin
endif
# Where to install the Info files.
ifndef infodir
infodir = $(prefix)/info
endif
# Where to install default configuration files. These include the local
# timezone specification and network data base files.
ifndef sysconfdir
sysconfdir = $(prefix)/etc
endif
# What timezone should be the installed default (e.g., US/Eastern).
# Run `make -C time echo-zonenames' to see a list of available zone names.
# The local timezone can be changed with `zic -l TIMEZONE' at any time.
ifndef localtime
localtime = Factory
endif
# Where to install the "localtime" timezone file; this is the file whose
# contents $(localtime) specifies. If this is a relative pathname, it is
# relative to $(zonedir). It is a good idea to put this somewhere
# other than there, so the zoneinfo directory contains only universal data,
# localizing the configuration data elsewhere.
ifndef localtime-file
localtime-file = $(sysconfdir)/localtime
endif
# What timezone's DST rules should be used when a POSIX-style TZ
# environment variable doesn't specify any rules. For 1003.1 compliance
# this timezone must use rules that are as U.S. federal law defines DST.
# Run `make -C time echo-zonenames' to see a list of available zone names.
# This setting can be changed with `zic -p TIMEZONE' at any time.
# If you want POSIX.1 compatibility, use `America/New_York'.
ifndef posixrules
posixrules = America/New_York
endif
# Where to install the "posixrules" timezone file; this is file
# whose contents $(posixrules) specifies. If this is a relative
# pathname, it is relative to $(zonedir).
ifndef posixrules-file
posixrules-file = posixrules
endif
# Directory where your system's native header files live.
# This is used on Unix systems to generate some GNU libc header files.
ifndef sysincludedir
sysincludedir = /usr/include
endif
# Commands to install files.
ifndef INSTALL_DATA
INSTALL_DATA = $(INSTALL) -m 644
endif
ifndef INSTALL_PROGRAM
INSTALL_PROGRAM = $(INSTALL)
endif
ifndef INSTALL
INSTALL = install
endif
# The name of the C compiler.
# If you've got GCC, and it works, use it.
ifeq ($(origin CC),default)
CC := gcc
endif
# The name of the C compiler to use for compilations of programs to run on
# the host that is building the library. If you set CC to a
# cross-compiler, you must set this to the normal compiler.
ifndef BUILD_CC
BUILD_CC = $(CC)
endif
# Default flags to pass the C compiler.
ifndef default_cflags
default_cflags := -g
endif
# Flags to pass the C compiler when assembling preprocessed assembly code
# (`.S' files). On some systems the assembler doesn't understand the `#' line
# directives the preprocessor produces. If you have troubling compiling
# assembly code, try using -P here to suppress these directives.
ifndef asm-CPPFLAGS
asm-CPPFLAGS =
endif
# Command for linking programs with the C library.
ifndef +link
+link = $(CC) -nostdlib -nostartfiles -o $@ \
$(sysdep-LDFLAGS) $(config-LDFLAGS) $(LDFLAGS) \
$(addprefix $(csu-objpfx),start.o $(+preinit)) \
$(filter-out $(common-objpfx)libc%,$^) $(link-libc) \
$(addprefix $(csu-objpfx),$(+postinit))
endif
ifndef config-LDFLAGS
ifeq (yes,$(build-shared))
config-LDFLAGS = -Wl,-dynamic-linker=$(slibdir)/$(rtld-installed-name)
endif
endif
ifndef link-libc
ifeq (yes,$(build-shared))
# We need the versioned name of libc.so in the deps of $(others) et al
# so that the symlink to libc.so is created before anything tries to
# run the linked programs.
link-libc = -Wl,-rpath-link=$(common-objdir) \
$(common-objpfx)libc.so$(libc.so-version) \
$(common-objpfx)libc.a $(gnulib)
# Choose the default search path for the dynamic linker based on
# where we will install libraries.
ifneq ($(libdir),$(slibdir))
default-rpath = $(slibdir):$(libdir)
else
default-rpath = $(libdir)
endif
else
link-libc = $(common-objpfx)libc.a $(gnulib) $(common-objpfx)libc.a
endif
endif
ifndef gnulib
gnulib := -lgcc
endif
ifeq ($(elf),yes)
+preinit = crti.o
+postinit = crtn.o
endif
ifdef objpfx
csu-objpfx = $(objpfx)
elf-objpfx = $(objpfx)
else
csu-objpfx = $(..)csu/
elf-objpfx = $(..)elf/
endif
ifeq (yes,$(build-shared))
ifndef rtld-installed-name
rtld-installed-name = ld.so
endif
endif
# How to run a program we just linked with our library.
# The program binary is assumed to be $(word 2,$^).
built-program-file = $(dir $(word 2,$^))$(notdir $(word 2,$^))
ifneq (yes,$(build-shared))
built-program-cmd = $(built-program-file)
else
comma = ,
define built-program-cmd
LD_LIBRARY_PATH=$(common-objdir)$(patsubst -Wl$(comma)-rpath-link=%,:%,\
$(filter -Wl$(comma)-rpath-link=%,\
$(sysdep-LDFLAGS))) \
$(elf-objpfx)ld.so $(built-program-file)
endef
endif
ifndef LD
LD := ld -X
endif
ifndef RANLIB
RANLIB = ranlib
endif
# Extra flags to pass to GCC.
+gccwarn := -Wall -Wwrite-strings -Wno-parentheses -Winline -Wstrict-prototypes
# This is the program that generates makefile
# dependencies from C source files.
ifndef +mkdep
+mkdep = $(CC) -M
endif
# The program that makes Emacs-style TAGS files.
ETAGS := etags -T
# The `m4' macro processor; this is used by sysdeps/sparc/Makefile (and
# perhaps others) to preprocess assembly code in some cases.
M4 = m4
####
#### End of configuration variables.
####
# This tells some versions of GNU make before 3.63 not to export all variables.
.NOEXPORT:
# We want to echo the commands we're running without
# umpteem zillion filenames along with it (we use `...' instead)
# but we don't want this echoing done when the user has said
# he doesn't want to see commands echoed by using -s.
ifneq "$(findstring s,$(MAKEFLAGS))" "" # if -s
+cmdecho := echo >/dev/null
else # not -s
+cmdecho := echo
endif # -s
# These are the flags given to the compiler to tell
# it what sort of optimization and/or debugging output to do.
ifndef +cflags
# If `CFLAGS' was defined, use that.
ifdef CFLAGS
+cflags := $(filter-out -I%,$(CFLAGS))
endif # CFLAGS
endif # +cflags
# If none of the above worked, default to "-g".
ifeq "$(strip $(+cflags))" ""
+cflags := $(default_cflags)
endif # $(+cflags) == ""
+cflags := $(+cflags) $(+gccwarn)
+gcc-nowarn := -w
# Don't duplicate options if we inherited variables from the parent.
+cflags := $(sort $(+cflags))
# These are flags given to the C compiler to tell it to look for include
# files (including ones given in angle brackets) in the current directory
# and in the parent library source directory.
# `+sysdep-includes' will be defined by Makerules.
+includes = -I. $(filter-out -I,-I$(patsubst %/,%,$(..))) $($(stdio)-include) \
$(includes) $(+sysdep-includes) $(last-includes)
# Since libio has several internal header files, we use a -I instead
# of many little headers in the top level source directory.
libio-include = -I$(..)libio
# These are the variables that the implicit compilation rules use.
CPPFLAGS = $(+includes) $(defines) -include $(..)libc-symbols.h \
$(sysdep-CPPFLAGS) $(CPPFLAGS-$(suffix $@))
override CFLAGS = $(+cflags) $(sysdep-CFLAGS) $(CFLAGS-$(suffix $@)) \
$(CFLAGS-$(<F))
# This is the macro that the implicit linking rules use.
ifneq "$(filter -g,$(+cflags))" "" # -g is in $(+cflags)
LDFLAGS := -g
endif
# Enable object files for different versions of the library.
# Various things use $(object-suffixes) to know what all to make.
# The compilation rules use $(CPPFLAGS-${SUFFIX}) and $(CFLAGS-${SUFFIX})
# to pass different flags for each flavor.
libtypes = $(foreach o,$(object-suffixes),$(libtype$o))
object-suffixes := .o
libtype.o := lib%.a
ifeq (yes,$(build-shared))
# Under --enable-shared, we will build a shared library of PIC objects.
# The PIC object files are named foo.so.
object-suffixes += .so
CPPFLAGS-.so = -DPIC
CFLAGS-.so = -fPIC
libtype.so := lib%_pic.a
endif
ifeq (yes,$(build-profile))
# Under --enable-profile, we will build a static library of profiled objects.
# The profiled object files are named foo.po.
object-suffixes += .po
CPPFLAGS-.po = -DPROF
CFLAGS-.po = -pg
libtype.po = lib%_p.a
endif
ifeq (yes,$(build-omitfp))
# Under --enable-omitfp, we build an the library optimized without
# debugging information using -fomit-frame-pointer, and build an extra
# library with debugging information. The debuggable objects are named foo.go.
object-suffixes += .go
CFLAGS-.go = -g
CFLAGS-.o = -g0 -O99 -fomit-frame-pointer
CFLAGS-.so += $(CFLAGS.o)
libtype.go = lib%_g.a
endif
+gnu-stabs = $(shell echo>&2 '*** BARF ON ME')
ifneq ($(BUILD_CC),$(CC))
cross-compiling := yes
else
cross-compiling := no
endif
# Figure out the version numbers from version.h.
$(common-objpfx)version.mk: $(..)version.h $(..)Makeconfig
sed -n -e 's/^.*RELEASE.*"\([^"]*\)".*$$/release=\1/p' \
-e 's/^.*VERSION.*"\([^"]*\)".*$$/version=\1/p' \
< $< > $@-new
mv -f $@-new $@
endif # Makeconfig not yet included