glibc/sysdeps/mips/memset.S
Paul Eggert 5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00

427 lines
13 KiB
ArmAsm

/* Copyright (C) 2013-2019 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library. If not, see
<https://www.gnu.org/licenses/>. */
#ifdef ANDROID_CHANGES
# include "machine/asm.h"
# include "machine/regdef.h"
# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
#elif _LIBC
# include <sysdep.h>
# include <regdef.h>
# include <sys/asm.h>
# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
#elif defined _COMPILING_NEWLIB
# include "machine/asm.h"
# include "machine/regdef.h"
# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
#else
# include <regdef.h>
# include <sys/asm.h>
#endif
/* Check to see if the MIPS architecture we are compiling for supports
prefetching. */
#if (__mips == 4) || (__mips == 5) || (__mips == 32) || (__mips == 64)
# ifndef DISABLE_PREFETCH
# define USE_PREFETCH
# endif
#endif
#if defined(_MIPS_SIM) && ((_MIPS_SIM == _ABI64) || (_MIPS_SIM == _ABIN32))
# ifndef DISABLE_DOUBLE
# define USE_DOUBLE
# endif
#endif
#ifndef USE_DOUBLE
# ifndef DISABLE_DOUBLE_ALIGN
# define DOUBLE_ALIGN
# endif
#endif
/* Some asm.h files do not have the L macro definition. */
#ifndef L
# if _MIPS_SIM == _ABIO32
# define L(label) $L ## label
# else
# define L(label) .L ## label
# endif
#endif
/* Some asm.h files do not have the PTR_ADDIU macro definition. */
#ifndef PTR_ADDIU
# ifdef USE_DOUBLE
# define PTR_ADDIU daddiu
# else
# define PTR_ADDIU addiu
# endif
#endif
/* New R6 instructions that may not be in asm.h. */
#ifndef PTR_LSA
# if _MIPS_SIM == _ABI64
# define PTR_LSA dlsa
# else
# define PTR_LSA lsa
# endif
#endif
/* Using PREFETCH_HINT_PREPAREFORSTORE instead of PREFETCH_STORE
or PREFETCH_STORE_STREAMED offers a large performance advantage
but PREPAREFORSTORE has some special restrictions to consider.
Prefetch with the 'prepare for store' hint does not copy a memory
location into the cache, it just allocates a cache line and zeros
it out. This means that if you do not write to the entire cache
line before writing it out to memory some data will get zero'ed out
when the cache line is written back to memory and data will be lost.
There are ifdef'ed sections of this memcpy to make sure that it does not
do prefetches on cache lines that are not going to be completely written.
This code is only needed and only used when PREFETCH_STORE_HINT is set to
PREFETCH_HINT_PREPAREFORSTORE. This code assumes that cache lines are
less than MAX_PREFETCH_SIZE bytes and if the cache line is larger it will
not work correctly. */
#ifdef USE_PREFETCH
# define PREFETCH_HINT_STORE 1
# define PREFETCH_HINT_STORE_STREAMED 5
# define PREFETCH_HINT_STORE_RETAINED 7
# define PREFETCH_HINT_PREPAREFORSTORE 30
/* If we have not picked out what hints to use at this point use the
standard load and store prefetch hints. */
# ifndef PREFETCH_STORE_HINT
# define PREFETCH_STORE_HINT PREFETCH_HINT_STORE
# endif
/* We double everything when USE_DOUBLE is true so we do 2 prefetches to
get 64 bytes in that case. The assumption is that each individual
prefetch brings in 32 bytes. */
# ifdef USE_DOUBLE
# define PREFETCH_CHUNK 64
# define PREFETCH_FOR_STORE(chunk, reg) \
pref PREFETCH_STORE_HINT, (chunk)*64(reg); \
pref PREFETCH_STORE_HINT, ((chunk)*64)+32(reg)
# else
# define PREFETCH_CHUNK 32
# define PREFETCH_FOR_STORE(chunk, reg) \
pref PREFETCH_STORE_HINT, (chunk)*32(reg)
# endif
/* MAX_PREFETCH_SIZE is the maximum size of a prefetch, it must not be less
than PREFETCH_CHUNK, the assumed size of each prefetch. If the real size
of a prefetch is greater than MAX_PREFETCH_SIZE and the PREPAREFORSTORE
hint is used, the code will not work correctly. If PREPAREFORSTORE is not
used than MAX_PREFETCH_SIZE does not matter. */
# define MAX_PREFETCH_SIZE 128
/* PREFETCH_LIMIT is set based on the fact that we never use an offset greater
than 5 on a STORE prefetch and that a single prefetch can never be larger
than MAX_PREFETCH_SIZE. We add the extra 32 when USE_DOUBLE is set because
we actually do two prefetches in that case, one 32 bytes after the other. */
# ifdef USE_DOUBLE
# define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + 32 + MAX_PREFETCH_SIZE
# else
# define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + MAX_PREFETCH_SIZE
# endif
# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) \
&& ((PREFETCH_CHUNK * 4) < MAX_PREFETCH_SIZE)
/* We cannot handle this because the initial prefetches may fetch bytes that
are before the buffer being copied. We start copies with an offset
of 4 so avoid this situation when using PREPAREFORSTORE. */
# error "PREFETCH_CHUNK is too large and/or MAX_PREFETCH_SIZE is too small."
# endif
#else /* USE_PREFETCH not defined */
# define PREFETCH_FOR_STORE(offset, reg)
#endif
#if __mips_isa_rev > 5
# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
# undef PREFETCH_STORE_HINT
# define PREFETCH_STORE_HINT PREFETCH_HINT_STORE_STREAMED
# endif
# define R6_CODE
#endif
/* Allow the routine to be named something else if desired. */
#ifndef MEMSET_NAME
# define MEMSET_NAME memset
#endif
/* We load/store 64 bits at a time when USE_DOUBLE is true.
The C_ prefix stands for CHUNK and is used to avoid macro name
conflicts with system header files. */
#ifdef USE_DOUBLE
# define C_ST sd
# ifdef __MIPSEB
# define C_STHI sdl /* high part is left in big-endian */
# else
# define C_STHI sdr /* high part is right in little-endian */
# endif
#else
# define C_ST sw
# ifdef __MIPSEB
# define C_STHI swl /* high part is left in big-endian */
# else
# define C_STHI swr /* high part is right in little-endian */
# endif
#endif
/* Bookkeeping values for 32 vs. 64 bit mode. */
#ifdef USE_DOUBLE
# define NSIZE 8
# define NSIZEMASK 0x3f
# define NSIZEDMASK 0x7f
#else
# define NSIZE 4
# define NSIZEMASK 0x1f
# define NSIZEDMASK 0x3f
#endif
#define UNIT(unit) ((unit)*NSIZE)
#define UNITM1(unit) (((unit)*NSIZE)-1)
#ifdef ANDROID_CHANGES
LEAF(MEMSET_NAME,0)
#else
LEAF(MEMSET_NAME)
#endif
.set nomips16
.set noreorder
/* If the size is less than 2*NSIZE (8 or 16), go to L(lastb). Regardless of
size, copy dst pointer to v0 for the return value. */
slti t2,a2,(2 * NSIZE)
bne t2,zero,L(lastb)
move v0,a0
/* If memset value is not zero, we copy it to all the bytes in a 32 or 64
bit word. */
beq a1,zero,L(set0) /* If memset value is zero no smear */
PTR_SUBU a3,zero,a0
nop
/* smear byte into 32 or 64 bit word */
#if ((__mips == 64) || (__mips == 32)) && (__mips_isa_rev >= 2)
# ifdef USE_DOUBLE
dins a1, a1, 8, 8 /* Replicate fill byte into half-word. */
dins a1, a1, 16, 16 /* Replicate fill byte into word. */
dins a1, a1, 32, 32 /* Replicate fill byte into dbl word. */
# else
ins a1, a1, 8, 8 /* Replicate fill byte into half-word. */
ins a1, a1, 16, 16 /* Replicate fill byte into word. */
# endif
#else
# ifdef USE_DOUBLE
and a1,0xff
dsll t2,a1,8
or a1,t2
dsll t2,a1,16
or a1,t2
dsll t2,a1,32
or a1,t2
# else
and a1,0xff
sll t2,a1,8
or a1,t2
sll t2,a1,16
or a1,t2
# endif
#endif
/* If the destination address is not aligned do a partial store to get it
aligned. If it is already aligned just jump to L(aligned). */
L(set0):
#ifndef R6_CODE
andi t2,a3,(NSIZE-1) /* word-unaligned address? */
beq t2,zero,L(aligned) /* t2 is the unalignment count */
PTR_SUBU a2,a2,t2
C_STHI a1,0(a0)
PTR_ADDU a0,a0,t2
#else /* R6_CODE */
andi t2,a0,(NSIZE-1)
lapc t9,L(atable)
PTR_LSA t9,t2,t9,2
jrc t9
L(atable):
bc L(aligned)
# ifdef USE_DOUBLE
bc L(lb7)
bc L(lb6)
bc L(lb5)
bc L(lb4)
# endif
bc L(lb3)
bc L(lb2)
bc L(lb1)
L(lb7):
sb a1,6(a0)
L(lb6):
sb a1,5(a0)
L(lb5):
sb a1,4(a0)
L(lb4):
sb a1,3(a0)
L(lb3):
sb a1,2(a0)
L(lb2):
sb a1,1(a0)
L(lb1):
sb a1,0(a0)
li t9,NSIZE
subu t2,t9,t2
PTR_SUBU a2,a2,t2
PTR_ADDU a0,a0,t2
#endif /* R6_CODE */
L(aligned):
/* If USE_DOUBLE is not set we may still want to align the data on a 16
byte boundry instead of an 8 byte boundry to maximize the opportunity
of proAptiv chips to do memory bonding (combining two sequential 4
byte stores into one 8 byte store). We know there are at least 4 bytes
left to store or we would have jumped to L(lastb) earlier in the code. */
#ifdef DOUBLE_ALIGN
andi t2,a3,4
beq t2,zero,L(double_aligned)
PTR_SUBU a2,a2,t2
sw a1,0(a0)
PTR_ADDU a0,a0,t2
L(double_aligned):
#endif
/* Now the destination is aligned to (word or double word) aligned address
Set a2 to count how many bytes we have to copy after all the 64/128 byte
chunks are copied and a3 to the dest pointer after all the 64/128 byte
chunks have been copied. We will loop, incrementing a0 until it equals
a3. */
andi t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */
beq a2,t8,L(chkw) /* if a2==t8, no 64-byte/128-byte chunks */
PTR_SUBU a3,a2,t8 /* subtract from a2 the reminder */
PTR_ADDU a3,a0,a3 /* Now a3 is the final dst after loop */
/* When in the loop we may prefetch with the 'prepare to store' hint,
in this case the a0+x should not be past the "t0-32" address. This
means: for x=128 the last "safe" a0 address is "t0-160". Alternatively,
for x=64 the last "safe" a0 address is "t0-96" In the current version we
will use "prefetch hint,128(a0)", so "t0-160" is the limit. */
#if defined(USE_PREFETCH) \
&& (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
PTR_ADDU t0,a0,a2 /* t0 is the "past the end" address */
PTR_SUBU t9,t0,PREFETCH_LIMIT /* t9 is the "last safe pref" address */
#endif
#if defined(USE_PREFETCH) \
&& (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE)
PREFETCH_FOR_STORE (1, a0)
PREFETCH_FOR_STORE (2, a0)
PREFETCH_FOR_STORE (3, a0)
#endif
L(loop16w):
#if defined(USE_PREFETCH) \
&& (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
sltu v1,t9,a0 /* If a0 > t9 don't use next prefetch */
bgtz v1,L(skip_pref)
nop
#endif
#ifdef R6_CODE
PREFETCH_FOR_STORE (2, a0)
#else
PREFETCH_FOR_STORE (4, a0)
PREFETCH_FOR_STORE (5, a0)
#endif
L(skip_pref):
C_ST a1,UNIT(0)(a0)
C_ST a1,UNIT(1)(a0)
C_ST a1,UNIT(2)(a0)
C_ST a1,UNIT(3)(a0)
C_ST a1,UNIT(4)(a0)
C_ST a1,UNIT(5)(a0)
C_ST a1,UNIT(6)(a0)
C_ST a1,UNIT(7)(a0)
C_ST a1,UNIT(8)(a0)
C_ST a1,UNIT(9)(a0)
C_ST a1,UNIT(10)(a0)
C_ST a1,UNIT(11)(a0)
C_ST a1,UNIT(12)(a0)
C_ST a1,UNIT(13)(a0)
C_ST a1,UNIT(14)(a0)
C_ST a1,UNIT(15)(a0)
PTR_ADDIU a0,a0,UNIT(16) /* adding 64/128 to dest */
bne a0,a3,L(loop16w)
nop
move a2,t8
/* Here we have dest word-aligned but less than 64-bytes or 128 bytes to go.
Check for a 32(64) byte chunk and copy if there is one. Otherwise
jump down to L(chk1w) to handle the tail end of the copy. */
L(chkw):
andi t8,a2,NSIZEMASK /* is there a 32-byte/64-byte chunk. */
/* the t8 is the reminder count past 32-bytes */
beq a2,t8,L(chk1w)/* when a2==t8, no 32-byte chunk */
nop
C_ST a1,UNIT(0)(a0)
C_ST a1,UNIT(1)(a0)
C_ST a1,UNIT(2)(a0)
C_ST a1,UNIT(3)(a0)
C_ST a1,UNIT(4)(a0)
C_ST a1,UNIT(5)(a0)
C_ST a1,UNIT(6)(a0)
C_ST a1,UNIT(7)(a0)
PTR_ADDIU a0,a0,UNIT(8)
/* Here we have less than 32(64) bytes to set. Set up for a loop to
copy one word (or double word) at a time. Set a2 to count how many
bytes we have to copy after all the word (or double word) chunks are
copied and a3 to the dest pointer after all the (d)word chunks have
been copied. We will loop, incrementing a0 until a0 equals a3. */
L(chk1w):
andi a2,t8,(NSIZE-1) /* a2 is the reminder past one (d)word chunks */
beq a2,t8,L(lastb)
PTR_SUBU a3,t8,a2 /* a3 is count of bytes in one (d)word chunks */
PTR_ADDU a3,a0,a3 /* a3 is the dst address after loop */
/* copying in words (4-byte or 8 byte chunks) */
L(wordCopy_loop):
PTR_ADDIU a0,a0,UNIT(1)
bne a0,a3,L(wordCopy_loop)
C_ST a1,UNIT(-1)(a0)
/* Copy the last 8 (or 16) bytes */
L(lastb):
blez a2,L(leave)
PTR_ADDU a3,a0,a2 /* a3 is the last dst address */
L(lastbloop):
PTR_ADDIU a0,a0,1
bne a0,a3,L(lastbloop)
sb a1,-1(a0)
L(leave):
j ra
nop
.set at
.set reorder
END(MEMSET_NAME)
#ifndef ANDROID_CHANGES
# ifdef _LIBC
libc_hidden_builtin_def (MEMSET_NAME)
# endif
#endif