glibc/sysdeps/s390/configure
Rogerio Alves 07ed18d26a Add elision tunables
This patch adds several new tunables to control the behavior of
elision on supported platforms[1].   Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection.  This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].

Tested on ppc, ppc64, ppc64le, s390x and x86_64.

[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:

https://patchwork.sourceware.org/patch/10342/

[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell.  Make sense to me integrate this on the patch:

https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html

	* elf/dl-tunables.list: Add elision parameters.
	* manual/tunables.texi: Add entries about elision tunable.
	* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
	Add callback functions to dynamically enable/disable elision.
	Add multiple callbacks functions to set elision parameters.
	Deleted __libc_enable_secure check.
	* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
	* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
	* configure: Regenerated.
	* configure.ac: Option enable_lock_elision was deleted.
	* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
	* config.make.in: Remove references to enable_lock_elision.
	* manual/install.texi: Elision configure option was removed.
	* INSTALL: Regenerated to remove enable_lock_elision.
	* nptl/Makefile:
	Disable elision so it can verify error case for destroying a mutex.
	* sysdeps/powerpc/nptl/elide.h:
	Cleanup ENABLE_LOCK_ELISION check.
	Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
	* sysdeps/s390/configure: Regenerated.
	* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
	* nptl/tst-mutex8.c:
	Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
	* sysdeps/powerpc/powerpc32/sysdep.h:
	Deleted all ENABLE_LOCK_ELISION checks.
	* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
	* sysdeps/powerpc/sysdep.h: Likewise.
	* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
	enable-lock-elision.

Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
2017-12-05 17:48:48 -02:00

153 lines
4.5 KiB
Plaintext

# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/s390.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __builtin_tbegin" >&5
$as_echo_n "checking for __builtin_tbegin... " >&6; }
if ${libc_cv_gcc_builtin_tbegin+:} false; then :
$as_echo_n "(cached) " >&6
else
cat > conftest.c <<\EOF
#include <htmintrin.h>
void testtransaction ()
{
if (__builtin_tbegin (0) == _HTM_TBEGIN_STARTED)
{
__builtin_tend ();
}
}
EOF
if { ac_try='${CC-cc} -mhtm -O2 -S conftest.c -o - | grep -w tbegin > /dev/null'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
(eval $ac_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; } ;
then
libc_cv_gcc_builtin_tbegin=yes
else
libc_cv_gcc_builtin_tbegin=no
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_gcc_builtin_tbegin" >&5
$as_echo "$libc_cv_gcc_builtin_tbegin" >&6; }
if test "$libc_cv_gcc_builtin_tbegin" = no ; then
critic_missing="$critic_missing The used GCC has no support for __builtin_tbegin, which is needed for lock-elision on target S390."
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for S390 vector instruction support" >&5
$as_echo_n "checking for S390 vector instruction support... " >&6; }
if ${libc_cv_asm_s390_vx+:} false; then :
$as_echo_n "(cached) " >&6
else
cat > conftest.c <<\EOF
void testvecinsn ()
{
__asm__ (".machine \"z13\" \n\t"
".machinemode \"zarch_nohighgprs\" \n\t"
"vistrbs %%v16,%%v17 \n\t"
"locghie %%r1,0" : :);
}
EOF
if { ac_try='${CC-cc} --shared conftest.c -o conftest.o &> /dev/null'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
(eval $ac_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; } ;
then
libc_cv_asm_s390_vx=yes
else
libc_cv_asm_s390_vx=no
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_asm_s390_vx" >&5
$as_echo "$libc_cv_asm_s390_vx" >&6; }
if test "$libc_cv_asm_s390_vx" = yes ;
then
$as_echo "#define HAVE_S390_VX_ASM_SUPPORT 1" >>confdefs.h
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Use binutils with vector-support in order to use optimized implementations." >&5
$as_echo "$as_me: WARNING: Use binutils with vector-support in order to use optimized implementations." >&2;}
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for S390 vector support in gcc" >&5
$as_echo_n "checking for S390 vector support in gcc... " >&6; }
if ${libc_cv_gcc_s390_vx+:} false; then :
$as_echo_n "(cached) " >&6
else
cat > conftest.c <<\EOF
void testvecclobber ()
{
__asm__ ("" : : : "v16");
}
EOF
if { ac_try='${CC-cc} --shared conftest.c -o conftest.o &> /dev/null'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
(eval $ac_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; } ;
then
libc_cv_gcc_s390_vx=yes
else
libc_cv_gcc_s390_vx=no
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_gcc_s390_vx" >&5
$as_echo "$libc_cv_gcc_s390_vx" >&6; }
if test "$libc_cv_gcc_s390_vx" = yes ;
then
$as_echo "#define HAVE_S390_VX_GCC_SUPPORT 1" >>confdefs.h
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for S390 z196 zarch instruction support as default" >&5
$as_echo_n "checking for S390 z196 zarch instruction support as default... " >&6; }
if ${libc_cv_asm_s390_min_z196_zarch+:} false; then :
$as_echo_n "(cached) " >&6
else
cat > conftest.c <<\EOF
float testinsn (double e)
{
float d;
__asm__ ("ledbra %0,5,%1,4" : "=f" (d) : "f" (e) );
return d;
}
EOF
if { ac_try='${CC-cc} $CFLAGS $CPPFLAGS $LDFLAGS --shared conftest.c
-o conftest.o &> /dev/null'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
(eval $ac_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; } ;
then
libc_cv_asm_s390_min_z196_zarch=yes
else
libc_cv_asm_s390_min_z196_zarch=no
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_asm_s390_min_z196_zarch" >&5
$as_echo "$libc_cv_asm_s390_min_z196_zarch" >&6; }
if test "$libc_cv_asm_s390_min_z196_zarch" = yes ;
then
$as_echo "#define HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT 1" >>confdefs.h
fi
test -n "$critic_missing" && as_fn_error $? "
*** $critic_missing" "$LINENO" 5