glibc/posix/Makefile
Zack Weinberg 7c3018f9e4 Suppress internal declarations for most of the testsuite.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.

There are still quite a few tests that need to see internal gunk of
one variety or another.  For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'.  There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.

There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all.  (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.)  When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.

The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change.  They should be
relatively self-explanatory.  In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.

	* Makerules: New subdir configuration variables 'tests-internal'
	and 'test-internal-extras'.  Test files in these categories will
	still be compiled with MODULE_NAME=nonlib.  Test files in the
	existing categories (tests, xtests, test-srcs, test-extras) are
	now compiled with MODULE_NAME=testsuite.
	New subdir configuration variable 'modules-names-tests'.  Files
	which are in both 'modules-names' and 'modules-names-tests' will
	be compiled with MODULE_NAME=testsuite instead of
	MODULE_NAME=extramodules.
	(gen-as-const-headers): Move to tests-internal.
	(do-tests-clean, common-mostlyclean): Support tests-internal.
	* Makeconfig (built-modules): Add testsuite.
	* Makefile: Change libof-check-installed-headers-c and
	libof-check-installed-headers-cxx to 'testsuite'.
	* Rules: Likewise.  Support tests-internal.
	* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
	Remove extra-modules.mk.

	* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
	* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
	PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
	very top of the file and rationalize their order.
	If MODULE_NAME is not defined at all, define IS_IN to always be
	false, and don't define _ISOMAC.
	If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
	true, define _ISOMAC and suppress everything else in this file,
	starting with the inclusion of config.h.
	Do check for inappropriate definitions of __OPTIMIZE__ and
	__FAST_MATH__ here, but only if _ISOMAC is not defined.
        Correct some out-of-date commentary.

	* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
	and _Mlong_double_ before including math.h.
	* include/string.h: If _ISOMAC is defined, don't expose
	_STRING_ARCH_unaligned. Move a comment to a more appropriate
	location.

	* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
	* include/time.h, include/unistd.h, include/wchar.h: No need to
	check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.

	* misc/sys/cdefs.h (__NTHNL): New macro.
	* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
	(__m81_defun): Use __NTHNL to avoid errors with GCC 6.

	* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
	defined, for HAVE_TUNABLES.
	* inet/tst-checks-posix.c: No need to define _ISOMAC.
	* intl/tst-gettext2.c: Provide own definition of N_.
	* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
	* math/test-signgam-main.c: No need to define _ISOMAC.
	* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
	* stdlib/tst-strtod1i.c: ...this new file.
	* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
        Split tests of __strtod_internal to...
	* stdlib/tst-strtod5i.c: ...this new file.
	* string/test-string.h: Include stdint.h. Duplicate definition of
	inhibit_loop_to_libcall here (from libc-symbols.h).
	* string/test-strstr.c: Provide dummy definition of
	libc_hidden_builtin_def when including strstr.c.
	* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
	mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
	* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
	Don't include init-arch.h.
	* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
	Don't include init-arch.h.

	* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
	tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
	unload, unload2, circleload1, neededtest, neededtest2,
	neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
	tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
	tst-stackguard1, tst-_dl_addr_inside_object, and all of the
	ifunc tests to tests-internal.
	Don't add $(modules-names) to test-extras.
	* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
	Add tst-deadline to tests-static-internal.
	* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
	tests-internal.
	* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
	* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
	tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
	tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
	tst-sem12-static, and tst-stackguard1-static to tests-internal.
        Link tests-internal with libpthread also.
	Don't add $(modules-names) to test-extras.
	* nss/Makefile: Move tst-field to tests-internal.
	* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
	tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
	* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
	tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
	tests-internal.
        * sunrpc/Makefile: Move tst-svc_register to tests-internal.
	* sysdeps/powerpc/Makefile: Move test-get_hwcap and
	test-get_hwcap-static to tests-internal.
	* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
	tests-internal.
	* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
	modules-names-tests.
2017-05-11 19:27:59 -04:00

376 lines
15 KiB
Makefile

# Copyright (C) 1991-2017 Free Software Foundation, Inc.
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
# The GNU C Library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
# You should have received a copy of the GNU Lesser General Public
# License along with the GNU C Library; if not, see
# <http://www.gnu.org/licenses/>.
#
# Sub-makefile for POSIX portion of the library.
#
subdir := posix
include ../Makeconfig
headers := sys/utsname.h sys/times.h sys/wait.h sys/types.h unistd.h \
glob.h regex.h wordexp.h fnmatch.h \
getopt.h bits/getopt_core.h bits/getopt_ext.h bits/getopt_posix.h \
bits/types.h bits/typesizes.h bits/pthreadtypes.h \
bits/pthreadtypes-arch.h bits/thread-shared-types.h \
bits/posix1_lim.h bits/posix2_lim.h bits/posix_opt.h \
bits/local_lim.h tar.h bits/utsname.h bits/confname.h \
bits/waitflags.h bits/waitstatus.h sys/unistd.h sched.h \
bits/sched.h re_comp.h wait.h bits/environments.h cpio.h \
spawn.h bits/unistd.h
routines := \
uname \
times \
wait waitpid wait3 wait4 waitid \
alarm sleep pause nanosleep \
fork vfork _exit \
execve fexecve execv execle execl execvp execlp execvpe \
getpid getppid \
getuid geteuid getgid getegid getgroups setuid setgid group_member \
getpgid setpgid getpgrp bsd-getpgrp setpgrp getsid setsid \
getresuid getresgid setresuid setresgid \
pathconf sysconf fpathconf \
glob glob64 fnmatch regex \
confstr \
getopt getopt1 \
sched_setp sched_getp sched_sets sched_gets sched_yield sched_primax \
sched_primin sched_rr_gi sched_getaffinity sched_setaffinity \
getaddrinfo gai_strerror wordexp \
pread pwrite pread64 pwrite64 \
spawn_faction_init spawn_faction_destroy spawn_faction_addclose \
spawn_faction_addopen spawn_faction_adddup2 spawn_valid_fd \
spawnattr_init spawnattr_destroy \
spawnattr_getdefault spawnattr_setdefault \
spawnattr_getflags spawnattr_setflags \
spawnattr_getpgroup spawnattr_setpgroup spawn spawnp spawni \
spawnattr_getsigmask spawnattr_getschedpolicy spawnattr_getschedparam \
spawnattr_setsigmask spawnattr_setschedpolicy spawnattr_setschedparam \
posix_madvise \
get_child_max sched_cpucount sched_cpualloc sched_cpufree
aux := init-posix environ
tests := test-errno tstgetopt testfnm runtests runptests \
tst-preadwrite tst-preadwrite64 test-vfork regexbug1 \
tst-mmap tst-mmap-offset tst-getaddrinfo tst-truncate \
tst-truncate64 tst-fork tst-fnmatch tst-regexloc tst-dir \
tst-chmod bug-regex1 bug-regex2 bug-regex3 bug-regex4 \
tst-gnuglob tst-regex bug-regex6 bug-regex7 \
bug-regex8 bug-regex9 bug-regex10 bug-regex11 bug-regex12 \
bug-regex13 bug-regex14 bug-regex15 bug-regex16 \
bug-regex17 bug-regex18 bug-regex19 \
bug-regex21 bug-regex22 bug-regex23 bug-regex24 \
bug-regex25 bug-regex26 bug-regex27 bug-regex28 \
bug-regex29 bug-regex30 bug-regex31 bug-regex32 \
tst-nice tst-nanosleep tst-regex2 \
transbug tst-rxspencer tst-pcre tst-boost \
bug-ga1 tst-vfork1 tst-vfork2 tst-vfork3 tst-waitid \
tst-getaddrinfo2 bug-glob1 bug-glob2 bug-glob3 tst-sysconf \
tst-execvp1 tst-execvp2 tst-execlp1 tst-execlp2 \
tst-execv1 tst-execv2 tst-execl1 tst-execl2 \
tst-execve1 tst-execve2 tst-execle1 tst-execle2 \
tst-execvp3 tst-execvp4 \
tst-execvpe1 tst-execvpe2 tst-execvpe3 tst-execvpe4 \
tst-execvpe5 tst-execvpe6 \
tst-getaddrinfo3 tst-fnmatch2 tst-cpucount tst-cpuset \
bug-getopt1 bug-getopt2 bug-getopt3 bug-getopt4 \
bug-getopt5 tst-getopt_long1 bug-regex34 bug-regex35 \
tst-pathconf tst-getaddrinfo4 tst-rxspencer-no-utf8 \
tst-fnmatch3 bug-regex36 tst-getaddrinfo5 \
tst-posix_spawn-fd tst-posix_spawn-setsid \
tst-posix_fadvise tst-posix_fadvise64
tests-internal := bug-regex5 bug-regex20 bug-regex33 \
tst-rfc3484 tst-rfc3484-2 tst-rfc3484-3
xtests := bug-ga2
ifeq (yes,$(build-shared))
test-srcs := globtest
tests += wordexp-test tst-exec tst-spawn tst-spawn2 tst-spawn3
endif
ifeq (yesyes,$(build-shared)$(have-thread-library))
tests += tst-getopt-cancel
endif
tests-static = tst-exec-static tst-spawn-static
tests += $(tests-static)
others := getconf
install-bin := getconf
install-others-programs := $(inst_libexecdir)/getconf
before-compile += testcases.h ptestcases.h $(objpfx)posix-conf-vars-def.h
# So they get cleaned up.
generated += $(addprefix wordexp-test-result, 1 2 3 4 5 6 7 8 9 10) \
annexc annexc.out wordexp-tst.out bug-regex2-mem.out \
bug-regex2.mtrace bug-regex14-mem.out bug-regex14.mtrace \
bug-regex21-mem.out bug-regex21.mtrace \
bug-regex31-mem.out bug-regex31.mtrace \
tst-rxspencer-no-utf8-mem.out tst-rxspencer-no-utf8.mtrace \
tst-getconf.out \
tst-pcre-mem.out tst-pcre.mtrace tst-boost-mem.out \
tst-boost.mtrace bug-ga2.mtrace bug-ga2-mem.out \
bug-glob2.mtrace bug-glob2-mem.out tst-vfork3-mem.out \
tst-vfork3.mtrace getconf.speclist tst-fnmatch-mem.out \
tst-fnmatch.mtrace bug-regex36.mtrace
ifeq ($(run-built-tests),yes)
ifeq (yes,$(build-shared))
tests-special += $(objpfx)globtest.out $(objpfx)wordexp-tst.out
endif
endif
# Run a test on the header files we use.
# XXX Please note that for now we ignore the result of this test.
tests-special += $(objpfx)annexc.out
ifeq ($(run-built-tests),yes)
tests-special += $(objpfx)bug-regex2-mem.out $(objpfx)bug-regex14-mem.out \
$(objpfx)bug-regex21-mem.out $(objpfx)bug-regex31-mem.out \
$(objpfx)tst-rxspencer-no-utf8-mem.out $(objpfx)tst-pcre-mem.out \
$(objpfx)tst-boost-mem.out $(objpfx)tst-getconf.out \
$(objpfx)bug-glob2-mem.out $(objpfx)tst-vfork3-mem.out \
$(objpfx)tst-fnmatch-mem.out $(objpfx)bug-regex36-mem.out
xtests-special += $(objpfx)bug-ga2-mem.out
endif
include ../Rules
ifeq ($(run-built-tests),yes)
# globtest and wordexp-test currently only works with shared libraries
ifeq (yes,$(build-shared))
$(objpfx)globtest.out: globtest.sh $(objpfx)globtest
$(SHELL) $< $(common-objpfx) '$(test-via-rtld-prefix)' \
'$(test-program-prefix)' '$(test-wrapper-env)'; \
$(evaluate-test)
$(objpfx)wordexp-tst.out: wordexp-tst.sh $(objpfx)wordexp-test
$(SHELL) $< $(common-objpfx) '$(test-program-prefix-before-env)' \
'$(run-program-env)' '$(test-program-prefix-after-env)'; \
$(evaluate-test)
endif
LOCALES := cs_CZ.UTF-8 da_DK.ISO-8859-1 de_DE.ISO-8859-1 de_DE.UTF-8 \
en_US.UTF-8 es_US.ISO-8859-1 es_US.UTF-8 ja_JP.EUC-JP tr_TR.UTF-8
include ../gen-locales.mk
$(objpfx)bug-regex1.out: $(gen-locales)
$(objpfx)bug-regex4.out: $(gen-locales)
$(objpfx)bug-regex5.out: $(gen-locales)
$(objpfx)bug-regex6.out: $(gen-locales)
$(objpfx)bug-regex17.out: $(gen-locales)
$(objpfx)bug-regex18.out: $(gen-locales)
$(objpfx)bug-regex19.out: $(gen-locales)
$(objpfx)bug-regex20.out: $(gen-locales)
$(objpfx)bug-regex22.out: $(gen-locales)
$(objpfx)bug-regex23.out: $(gen-locales)
$(objpfx)bug-regex25.out: $(gen-locales)
$(objpfx)bug-regex26.out: $(gen-locales)
$(objpfx)bug-regex30.out: $(gen-locales)
$(objpfx)bug-regex32.out: $(gen-locales)
$(objpfx)bug-regex33.out: $(gen-locales)
$(objpfx)bug-regex34.out: $(gen-locales)
$(objpfx)bug-regex35.out: $(gen-locales)
$(objpfx)tst-fnmatch.out: $(gen-locales)
$(objpfx)tst-fnmatch4.out: $(gen-locales)
$(objpfx)tst-fnmatch5.out: $(gen-locales)
$(objpfx)tst-regex.out: $(gen-locales)
$(objpfx)tst-regex2.out: $(gen-locales)
$(objpfx)tst-regexloc.out: $(gen-locales)
$(objpfx)tst-rxspencer.out: $(gen-locales)
$(objpfx)tst-rxspencer-no-utf8.out: $(gen-locales)
endif
# If we will use the generic uname implementation, we must figure out what
# it will say by examining the system, and write the results in config-name.h.
uname.c: $(objpfx)config-name.h
$(objpfx)config-name.h: $(..)scripts/config-uname.sh $(common-objpfx)config.make
$(make-target-directory)
$< '$(config-os)' '$(config-release)' \
'$(config-machine)-$(config-vendor)' > $@.new
mv -f $@.new $@
CFLAGS-getaddrinfo.c = -DRESOLVER -fexceptions
CFLAGS-pause.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pread.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pread64.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pwrite.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-pwrite64.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-sleep.c = -fexceptions
CFLAGS-wait.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-waitid.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-waitpid.c = -fexceptions -fasynchronous-unwind-tables
CFLAGS-getopt.c = -fexceptions
CFLAGS-wordexp.c = -fexceptions
CFLAGS-wordexp.os = -fomit-frame-pointer
CFLAGS-sysconf.c = -fexceptions -DGETCONF_DIR='"$(libexecdir)/getconf"'
CFLAGS-pathconf.c = -fexceptions
CFLAGS-fpathconf.c = -fexceptions
CFLAGS-spawn.c = -fexceptions
CFLAGS-spawn.os = -fomit-frame-pointer
CFLAGS-spawnp.c = -fexceptions
CFLAGS-spawnp.os = -fomit-frame-pointer
CFLAGS-spawni.c = -fexceptions
CFLAGS-spawni.os = -fomit-frame-pointer
CFLAGS-pause.c = -fexceptions
CFLAGS-glob.c = $(uses-callbacks) -fexceptions
CFLAGS-glob64.c = $(uses-callbacks) -fexceptions
CFLAGS-getconf.c = -DGETCONF_DIR='"$(libexecdir)/getconf"'
CFLAGS-execve.os = -fomit-frame-pointer
CFLAGS-fexecve.os = -fomit-frame-pointer
CFLAGS-execv.os = -fomit-frame-pointer
CFLAGS-execle.os = -fomit-frame-pointer
CFLAGS-execl.os = -fomit-frame-pointer
CFLAGS-execvp.os = -fomit-frame-pointer
CFLAGS-execlp.os = -fomit-frame-pointer
tstgetopt-ARGS = -a -b -cfoobar --required foobar --optional=bazbug \
--none random --col --color --colour
tst-exec-ARGS = -- $(host-test-program-cmd)
tst-exec-static-ARGS = $(tst-exec-ARGS)
tst-execvpe5-ARGS = -- $(host-test-program-cmd)
tst-spawn-ARGS = -- $(host-test-program-cmd)
tst-spawn-static-ARGS = $(tst-spawn-ARGS)
tst-dir-ARGS = `pwd` `cd $(common-objdir)/$(subdir); pwd` `cd $(common-objdir); pwd` $(objpfx)tst-dir
tst-chmod-ARGS = $(objdir)
tst-vfork3-ARGS = --test-dir=$(objpfx)
tst-rxspencer-ARGS = --utf8 rxspencer/tests
tst-rxspencer-no-utf8-ARGS = rxspencer/tests
tst-pcre-ARGS = PCRE.tests
tst-boost-ARGS = BOOST.tests
bug-glob1-ARGS = "$(objpfx)"
tst-execvp3-ARGS = --test-dir=$(objpfx)
testcases.h: TESTS TESTS2C.sed
LC_ALL=C sed -f TESTS2C.sed < $< > $@T
mv -f $@T $@
ptestcases.h: PTESTS PTESTS2C.sed
LC_ALL=C sed -f PTESTS2C.sed < $< > $@T
mv -f $@T $@
$(objpfx)tst-getopt-cancel: $(shared-thread-library)
test-xfail-annexc = yes
$(objpfx)annexc.out: $(objpfx)annexc
$(dir $<)$(notdir $<) '$(CC)' \
'$(patsubst %,-I../%,$(sorted-subdirs)) -I../include $(+sysdep-includes) $(sysincludes) -I..' > $@; \
$(evaluate-test)
annexc-CFLAGS = -O
$(objpfx)annexc: annexc.c
$(native-compile)
tst-fnmatch-ENV += MALLOC_TRACE=$(objpfx)tst-fnmatch.mtrace
$(objpfx)tst-fnmatch-mem.out: $(objpfx)tst-fnmatch.out
$(common-objpfx)malloc/mtrace $(objpfx)tst-fnmatch.mtrace > $@; \
$(evaluate-test)
bug-regex2-ENV = MALLOC_TRACE=$(objpfx)bug-regex2.mtrace
$(objpfx)bug-regex2-mem.out: $(objpfx)bug-regex2.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex2.mtrace > $@; \
$(evaluate-test)
bug-regex14-ENV = MALLOC_TRACE=$(objpfx)bug-regex14.mtrace
$(objpfx)bug-regex14-mem.out: $(objpfx)bug-regex14.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex14.mtrace > $@; \
$(evaluate-test)
bug-regex21-ENV = MALLOC_TRACE=$(objpfx)bug-regex21.mtrace
$(objpfx)bug-regex21-mem.out: $(objpfx)bug-regex21.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex21.mtrace > $@; \
$(evaluate-test)
bug-regex31-ENV = MALLOC_TRACE=$(objpfx)bug-regex31.mtrace
$(objpfx)bug-regex31-mem.out: $(objpfx)bug-regex31.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex31.mtrace > $@; \
$(evaluate-test)
bug-regex36-ENV = MALLOC_TRACE=$(objpfx)bug-regex36.mtrace
$(objpfx)bug-regex36-mem.out: $(objpfx)bug-regex36.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-regex36.mtrace > $@; \
$(evaluate-test)
tst-vfork3-ENV = MALLOC_TRACE=$(objpfx)tst-vfork3.mtrace
$(objpfx)tst-vfork3-mem.out: $(objpfx)tst-vfork3.out
$(common-objpfx)malloc/mtrace $(objpfx)tst-vfork3.mtrace > $@; \
$(evaluate-test)
# tst-rxspencer.mtrace is not generated, only
# tst-rxspencer-no-utf8.mtrace, since otherwise the file has almost
# 100M and takes very long time to process.
tst-rxspencer-no-utf8-ENV += MALLOC_TRACE=$(objpfx)tst-rxspencer-no-utf8.mtrace
$(objpfx)tst-rxspencer-no-utf8-mem.out: $(objpfx)tst-rxspencer-no-utf8.out
$(common-objpfx)malloc/mtrace $(objpfx)tst-rxspencer-no-utf8.mtrace \
> $@; \
$(evaluate-test)
tst-pcre-ENV = MALLOC_TRACE=$(objpfx)tst-pcre.mtrace
$(objpfx)tst-pcre-mem.out: $(objpfx)tst-pcre.out
$(common-objpfx)malloc/mtrace $(objpfx)tst-pcre.mtrace > $@; \
$(evaluate-test)
tst-boost-ENV = MALLOC_TRACE=$(objpfx)tst-boost.mtrace
$(objpfx)tst-boost-mem.out: $(objpfx)tst-boost.out
$(common-objpfx)malloc/mtrace $(objpfx)tst-boost.mtrace > $@; \
$(evaluate-test)
$(objpfx)tst-getconf.out: tst-getconf.sh $(objpfx)getconf
$(SHELL) $< $(common-objpfx) '$(built-program-cmd)'; \
$(evaluate-test)
$(objpfx)bug-ga2-mem.out: $(objpfx)bug-ga2.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-ga2.mtrace > $@; \
$(evaluate-test)
bug-ga2-ENV = MALLOC_TRACE=$(objpfx)bug-ga2.mtrace
bug-glob2-ENV = MALLOC_TRACE=$(objpfx)bug-glob2.mtrace
$(objpfx)bug-glob2-mem.out: $(objpfx)bug-glob2.out
$(common-objpfx)malloc/mtrace $(objpfx)bug-glob2.mtrace > $@; \
$(evaluate-test)
$(inst_libexecdir)/getconf: $(inst_bindir)/getconf \
$(objpfx)getconf.speclist FORCE
$(addprefix $(..)./scripts/mkinstalldirs ,\
$(filter-out $(wildcard $@),$@))
while read spec; do \
ln -f $< $@/$$spec.new || $(INSTALL_PROGRAM) $< $@/$$spec.new; \
mv -f $@/$$spec.new $@/$$spec; \
done < $(objpfx)getconf.speclist
$(objpfx)getconf.speclist: getconf-speclist.c posix-envs.def
$(compile.c) -E -o - \
| sed -n -e '/@@@PRESENT_/s/@@@PRESENT_//p' > $@.new
mv -f $@.new $@
# This file is only actually needed at install time. But forcing it to
# be built both makes it available for eyeball inspection and avoids the
# surprise of things that look like compilation being done by 'make install'.
others: $(objpfx)getconf.speclist
$(objpfx)posix-conf-vars-def.h: $(..)scripts/gen-posix-conf-vars.awk \
posix-conf-vars.list Makefile
$(make-target-directory)
$(AWK) -f $(filter-out Makefile, $^) > $@.tmp
mv -f $@.tmp $@