glibc/sysdeps/ia64/fpu/s_rintl.S
Siddhesh Poyarekar 30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30

230 lines
6.9 KiB
ArmAsm

.file "rintl.s"
// Copyright (c) 2000 - 2003, Intel Corporation
// All rights reserved.
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// * The name of Intel Corporation may not be used to endorse or promote
// products derived from this software without specific prior written
// permission.
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Intel Corporation is the author of this code, and requests that all
// problem reports or change requests be submitted to it directly at
// http://www.intel.com/software/products/opensource/libraries/num.htm.
//
// History
//==============================================================
// 02/02/00 Initial version
// 02/08/01 Corrected behavior for all rounding modes.
// 05/20/02 Cleaned up namespace and sf0 syntax
// 01/20/03 Improved performance
//==============================================================
// API
//==============================================================
// long double rintl(long double x)
//==============================================================
// general input registers:
// r14 - r21
rSignexp = r14
rExp = r15
rExpMask = r16
rBigexp = r17
rM1 = r18
rFpsr = r19
rRcs0 = r20
rRcs0Mask = r21
// floating-point registers:
// f8 - f11
fXInt = f9
fNormX = f10
fTmp = f11
// predicate registers used:
// p6 - p10
// Overview of operation
//==============================================================
// long double rintl(long double x)
// Return an integer value (represented as a long double) that is x
// rounded to integer in current rounding mode
// Inexact is set if x != rint(x)
//==============================================================
// double_extended
// if the exponent is > 1003e => 3F(true) = 63(decimal)
// we have a significand of 64 bits 1.63-bits.
// If we multiply by 2^63, we no longer have a fractional part
// So input is an integer value already.
// double
// if the exponent is >= 10033 => 34(true) = 52(decimal)
// 34 + 3ff = 433
// we have a significand of 53 bits 1.52-bits. (implicit 1)
// If we multiply by 2^52, we no longer have a fractional part
// So input is an integer value already.
// single
// if the exponent is > 10016 => 17(true) = 23(decimal)
// we have a significand of 24 bits 1.23-bits. (implicit 1)
// If we multiply by 2^23, we no longer have a fractional part
// So input is an integer value already.
.section .text
GLOBAL_IEEE754_ENTRY(rintl)
{ .mfi
getf.exp rSignexp = f8 // Get signexp, recompute if unorm
fclass.m p7,p0 = f8, 0x0b // Test x unorm
addl rBigexp = 0x1003e, r0 // Set exponent at which is integer
}
{ .mfi
mov rM1 = -1 // Set all ones
fcvt.fx.s1 fXInt = f8 // Convert to int in significand
mov rExpMask = 0x1FFFF // Form exponent mask
}
;;
{ .mfi
mov rFpsr = ar40 // Read fpsr -- check rc.s0
fclass.m p6,p0 = f8, 0x1e3 // Test x natval, nan, inf
nop.i 0
}
{ .mfb
setf.sig fTmp = rM1 // Make const for setting inexact
fnorm.s1 fNormX = f8 // Normalize input
(p7) br.cond.spnt RINT_UNORM // Branch if x unorm
}
;;
RINT_COMMON:
// Return here from RINT_UNORM
{ .mfb
and rExp = rSignexp, rExpMask // Get biased exponent
(p6) fma.s0 f8 = f8, f1, f0 // Result if x natval, nan, inf
(p6) br.ret.spnt b0 // Exit if x natval, nan, inf
}
;;
{ .mfi
mov rRcs0Mask = 0x0c00 // Mask for rc.s0
fcvt.xf f8 = fXInt // Result assume |x| < 2^63
cmp.ge p7,p8 = rExp, rBigexp // Is |x| >= 2^63?
}
;;
// We must correct result if |x| >= 2^63
{ .mfi
nop.m 0
(p7) fma.s0 f8 = fNormX, f1, f0 // If |x| >= 2^63, result x
nop.i 0
}
;;
{ .mfi
nop.m 0
fcmp.eq.unc.s1 p0, p9 = f8, fNormX // Is result = x ?
nop.i 0
}
{ .mfi
nop.m 0
(p8) fmerge.s f8 = fNormX, f8 // Make sure sign rint(x) = sign x
nop.i 0
}
;;
{ .mfi
(p8) and rRcs0 = rFpsr, rRcs0Mask // Get rounding mode for sf0
nop.f 0
nop.i 0
}
;;
// If |x| < 2^63 we must test for other rounding modes
{ .mfi
(p8) cmp.ne.unc p10,p0 = rRcs0, r0 // Test for other rounding modes
(p9) fmpy.s0 fTmp = fTmp, fTmp // Dummy to set inexact
nop.i 0
}
{ .mbb
nop.m 0
(p10) br.cond.spnt RINT_NOT_ROUND_NEAREST // Branch if not round nearest
br.ret.sptk b0 // Exit main path if round nearest
}
;;
RINT_UNORM:
// Here if x unorm
{ .mfb
getf.exp rSignexp = fNormX // Get signexp, recompute if unorm
fcmp.eq.s0 p7,p0 = f8, f0 // Dummy op to set denormal flag
br.cond.sptk RINT_COMMON // Return to main path
}
;;
RINT_NOT_ROUND_NEAREST:
// Here if not round to nearest, and |x| < 2^63
// Set rounding mode of s2 to that of s0, and repeat the conversion using s2
{ .mfi
nop.m 0
fsetc.s2 0x7f, 0x40
nop.i 0
}
;;
{ .mfi
nop.m 0
fcvt.fx.s2 fXInt = fNormX // Convert to int in significand
nop.i 0
}
;;
{ .mfi
nop.m 0
fcvt.xf f8 = fXInt // Expected result
nop.i 0
}
;;
// Be sure sign of result = sign of input. Fixes cases where result is 0.
{ .mfb
nop.m 0
fmerge.s f8 = fNormX, f8
br.ret.sptk b0 // Exit main path
}
;;
GLOBAL_IEEE754_END(rintl)
libm_alias_ldouble_other (__rint, rint)