mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-17 00:20:08 +00:00
e44acb2063
Similar to the changes that were made to call sqrt functions directly in glibc, instead of __ieee754_sqrt variants, so that the compiler could inline them automatically without needing special inline definitions in lots of math_private.h headers, this patch makes libm code call floor functions directly instead of __floor variants, removing the inlines / macros for x86_64 (SSE4.1) and powerpc (POWER5). The redirection used to ensure that __ieee754_sqrt does still get called when the compiler doesn't inline a built-in function expansion is refactored so it can be applied to other functions; the refactoring is arranged so it's not limited to unary functions either (it would be reasonable to use this mechanism for copysign - removing the inline in math_private_calls.h but also eliminating unnecessary local PLT entry use in the cases (powerpc soft-float and e500v1, for IBM long double) where copysign calls don't get inlined). The point of this change is that more architectures can get floor calls inlined where they weren't previously (AArch64, for example), without needing special inline definitions in their math_private.h, and existing such definitions in math_private.h headers can be removed. Note that it's possible that in some cases an inline may be used where an IFUNC call was previously used - this is the case on x86_64, for example. I think the direct calls to floor are still appropriate; if there's any significant performance cost from inline SSE2 floor instead of an IFUNC call ending up with SSE4.1 floor, that indicates that either the function should be doing something else that's faster than using floor at all, or it should itself have IFUNC variants, or that the compiler choice of inlining for generic tuning should change to allow for the possibility that, by not inlining, an SSE4.1 IFUNC might be called at runtime - but not that glibc should avoid calling floor internally. (After all, all the same considerations would apply to any user program calling floor, where it might either be inlined or left as an out-of-line call allowing for a possible IFUNC.) Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT): New macro. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_LDBL): Likewise. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_F128): Likewise. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_UNARY_ARGS): Likewise. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (sqrt): Redirect using MATH_REDIRECT. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (floor): Likewise. * sysdeps/aarch64/fpu/s_floor.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/aarch64/fpu/s_floorf.c: Likewise. * sysdeps/ieee754/dbl-64/s_floor.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Likewise. * sysdeps/ieee754/float128/s_floorf128.c: Likewise. * sysdeps/ieee754/flt-32/s_floorf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_floorl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_floorl.c: Likewise. * sysdeps/m68k/m680x0/fpu/s_floor_template.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_floor.c: Likewise. * sysdeps/riscv/rvf/s_floorf.c: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_floor.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_floorf.c: Likewise. * sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__floor): Remove macro. [_ARCH_PWR5X] (__floorf): Likewise. * sysdeps/x86_64/fpu/math_private.h [__SSE4_1__] (__floor): Remove inline function. [__SSE4_1__] (__floorf): Likewise. * math/w_lgamma_main.c (LGFUNC (__lgamma)): Use floor functions instead of __floor variants. * math/w_lgamma_r_compat.c (__lgamma_r): Likewise. * math/w_lgammaf_main.c (LGFUNC (__lgammaf)): Likewise. * math/w_lgammaf_r_compat.c (__lgammaf_r): Likewise. * math/w_lgammal_main.c (LGFUNC (__lgammal)): Likewise. * math/w_lgammal_r_compat.c (__lgammal_r): Likewise. * math/w_tgamma_compat.c (__tgamma): Likewise. * math/w_tgamma_template.c (M_DECL_FUNC (__tgamma)): Likewise. * math/w_tgammaf_compat.c (__tgammaf): Likewise. * math/w_tgammal_compat.c (__tgammal): Likewise. * sysdeps/ieee754/dbl-64/e_lgamma_r.c (sin_pi): Likewise. * sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2): Likewise. * sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (sin_pif): Likewise. * sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise. * sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128/lgamma_negl.c (__lgamma_negl): Likewise. * sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c (__ieee754_lgammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c (__lgamma_negl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise. * sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise. * sysdeps/ieee754/ldbl-96/lgamma_negl.c (__lgamma_negl): Likewise. * sysdeps/powerpc/power5+/fpu/s_modf.c (__modf): Likewise. * sysdeps/powerpc/power5+/fpu/s_modff.c (__modff): Likewise.
312 lines
11 KiB
C
312 lines
11 KiB
C
/* @(#)er_lgamma.c 5.1 93/09/24 */
|
|
/*
|
|
* ====================================================
|
|
* Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
|
|
*
|
|
* Developed at SunPro, a Sun Microsystems, Inc. business.
|
|
* Permission to use, copy, modify, and distribute this
|
|
* software is freely granted, provided that this notice
|
|
* is preserved.
|
|
* ====================================================
|
|
*/
|
|
|
|
/* __ieee754_lgamma_r(x, signgamp)
|
|
* Reentrant version of the logarithm of the Gamma function
|
|
* with user provide pointer for the sign of Gamma(x).
|
|
*
|
|
* Method:
|
|
* 1. Argument Reduction for 0 < x <= 8
|
|
* Since gamma(1+s)=s*gamma(s), for x in [0,8], we may
|
|
* reduce x to a number in [1.5,2.5] by
|
|
* lgamma(1+s) = log(s) + lgamma(s)
|
|
* for example,
|
|
* lgamma(7.3) = log(6.3) + lgamma(6.3)
|
|
* = log(6.3*5.3) + lgamma(5.3)
|
|
* = log(6.3*5.3*4.3*3.3*2.3) + lgamma(2.3)
|
|
* 2. Polynomial approximation of lgamma around its
|
|
* minimun ymin=1.461632144968362245 to maintain monotonicity.
|
|
* On [ymin-0.23, ymin+0.27] (i.e., [1.23164,1.73163]), use
|
|
* Let z = x-ymin;
|
|
* lgamma(x) = -1.214862905358496078218 + z^2*poly(z)
|
|
* where
|
|
* poly(z) is a 14 degree polynomial.
|
|
* 2. Rational approximation in the primary interval [2,3]
|
|
* We use the following approximation:
|
|
* s = x-2.0;
|
|
* lgamma(x) = 0.5*s + s*P(s)/Q(s)
|
|
* with accuracy
|
|
* |P/Q - (lgamma(x)-0.5s)| < 2**-61.71
|
|
* Our algorithms are based on the following observation
|
|
*
|
|
* zeta(2)-1 2 zeta(3)-1 3
|
|
* lgamma(2+s) = s*(1-Euler) + --------- * s - --------- * s + ...
|
|
* 2 3
|
|
*
|
|
* where Euler = 0.5771... is the Euler constant, which is very
|
|
* close to 0.5.
|
|
*
|
|
* 3. For x>=8, we have
|
|
* lgamma(x)~(x-0.5)log(x)-x+0.5*log(2pi)+1/(12x)-1/(360x**3)+....
|
|
* (better formula:
|
|
* lgamma(x)~(x-0.5)*(log(x)-1)-.5*(log(2pi)-1) + ...)
|
|
* Let z = 1/x, then we approximation
|
|
* f(z) = lgamma(x) - (x-0.5)(log(x)-1)
|
|
* by
|
|
* 3 5 11
|
|
* w = w0 + w1*z + w2*z + w3*z + ... + w6*z
|
|
* where
|
|
* |w - f(z)| < 2**-58.74
|
|
*
|
|
* 4. For negative x, since (G is gamma function)
|
|
* -x*G(-x)*G(x) = pi/sin(pi*x),
|
|
* we have
|
|
* G(x) = pi/(sin(pi*x)*(-x)*G(-x))
|
|
* since G(-x) is positive, sign(G(x)) = sign(sin(pi*x)) for x<0
|
|
* Hence, for x<0, signgam = sign(sin(pi*x)) and
|
|
* lgamma(x) = log(|Gamma(x)|)
|
|
* = log(pi/(|x*sin(pi*x)|)) - lgamma(-x);
|
|
* Note: one should avoid compute pi*(-x) directly in the
|
|
* computation of sin(pi*(-x)).
|
|
*
|
|
* 5. Special Cases
|
|
* lgamma(2+s) ~ s*(1-Euler) for tiny s
|
|
* lgamma(1)=lgamma(2)=0
|
|
* lgamma(x) ~ -log(x) for tiny x
|
|
* lgamma(0) = lgamma(inf) = inf
|
|
* lgamma(-integer) = +-inf
|
|
*
|
|
*/
|
|
|
|
#include <math.h>
|
|
#include <math-narrow-eval.h>
|
|
#include <math_private.h>
|
|
#include <libc-diag.h>
|
|
|
|
static const double
|
|
two52= 4.50359962737049600000e+15, /* 0x43300000, 0x00000000 */
|
|
half= 5.00000000000000000000e-01, /* 0x3FE00000, 0x00000000 */
|
|
one = 1.00000000000000000000e+00, /* 0x3FF00000, 0x00000000 */
|
|
pi = 3.14159265358979311600e+00, /* 0x400921FB, 0x54442D18 */
|
|
a0 = 7.72156649015328655494e-02, /* 0x3FB3C467, 0xE37DB0C8 */
|
|
a1 = 3.22467033424113591611e-01, /* 0x3FD4A34C, 0xC4A60FAD */
|
|
a2 = 6.73523010531292681824e-02, /* 0x3FB13E00, 0x1A5562A7 */
|
|
a3 = 2.05808084325167332806e-02, /* 0x3F951322, 0xAC92547B */
|
|
a4 = 7.38555086081402883957e-03, /* 0x3F7E404F, 0xB68FEFE8 */
|
|
a5 = 2.89051383673415629091e-03, /* 0x3F67ADD8, 0xCCB7926B */
|
|
a6 = 1.19270763183362067845e-03, /* 0x3F538A94, 0x116F3F5D */
|
|
a7 = 5.10069792153511336608e-04, /* 0x3F40B6C6, 0x89B99C00 */
|
|
a8 = 2.20862790713908385557e-04, /* 0x3F2CF2EC, 0xED10E54D */
|
|
a9 = 1.08011567247583939954e-04, /* 0x3F1C5088, 0x987DFB07 */
|
|
a10 = 2.52144565451257326939e-05, /* 0x3EFA7074, 0x428CFA52 */
|
|
a11 = 4.48640949618915160150e-05, /* 0x3F07858E, 0x90A45837 */
|
|
tc = 1.46163214496836224576e+00, /* 0x3FF762D8, 0x6356BE3F */
|
|
tf = -1.21486290535849611461e-01, /* 0xBFBF19B9, 0xBCC38A42 */
|
|
/* tt = -(tail of tf) */
|
|
tt = -3.63867699703950536541e-18, /* 0xBC50C7CA, 0xA48A971F */
|
|
t0 = 4.83836122723810047042e-01, /* 0x3FDEF72B, 0xC8EE38A2 */
|
|
t1 = -1.47587722994593911752e-01, /* 0xBFC2E427, 0x8DC6C509 */
|
|
t2 = 6.46249402391333854778e-02, /* 0x3FB08B42, 0x94D5419B */
|
|
t3 = -3.27885410759859649565e-02, /* 0xBFA0C9A8, 0xDF35B713 */
|
|
t4 = 1.79706750811820387126e-02, /* 0x3F9266E7, 0x970AF9EC */
|
|
t5 = -1.03142241298341437450e-02, /* 0xBF851F9F, 0xBA91EC6A */
|
|
t6 = 6.10053870246291332635e-03, /* 0x3F78FCE0, 0xE370E344 */
|
|
t7 = -3.68452016781138256760e-03, /* 0xBF6E2EFF, 0xB3E914D7 */
|
|
t8 = 2.25964780900612472250e-03, /* 0x3F6282D3, 0x2E15C915 */
|
|
t9 = -1.40346469989232843813e-03, /* 0xBF56FE8E, 0xBF2D1AF1 */
|
|
t10 = 8.81081882437654011382e-04, /* 0x3F4CDF0C, 0xEF61A8E9 */
|
|
t11 = -5.38595305356740546715e-04, /* 0xBF41A610, 0x9C73E0EC */
|
|
t12 = 3.15632070903625950361e-04, /* 0x3F34AF6D, 0x6C0EBBF7 */
|
|
t13 = -3.12754168375120860518e-04, /* 0xBF347F24, 0xECC38C38 */
|
|
t14 = 3.35529192635519073543e-04, /* 0x3F35FD3E, 0xE8C2D3F4 */
|
|
u0 = -7.72156649015328655494e-02, /* 0xBFB3C467, 0xE37DB0C8 */
|
|
u1 = 6.32827064025093366517e-01, /* 0x3FE4401E, 0x8B005DFF */
|
|
u2 = 1.45492250137234768737e+00, /* 0x3FF7475C, 0xD119BD6F */
|
|
u3 = 9.77717527963372745603e-01, /* 0x3FEF4976, 0x44EA8450 */
|
|
u4 = 2.28963728064692451092e-01, /* 0x3FCD4EAE, 0xF6010924 */
|
|
u5 = 1.33810918536787660377e-02, /* 0x3F8B678B, 0xBF2BAB09 */
|
|
v1 = 2.45597793713041134822e+00, /* 0x4003A5D7, 0xC2BD619C */
|
|
v2 = 2.12848976379893395361e+00, /* 0x40010725, 0xA42B18F5 */
|
|
v3 = 7.69285150456672783825e-01, /* 0x3FE89DFB, 0xE45050AF */
|
|
v4 = 1.04222645593369134254e-01, /* 0x3FBAAE55, 0xD6537C88 */
|
|
v5 = 3.21709242282423911810e-03, /* 0x3F6A5ABB, 0x57D0CF61 */
|
|
s0 = -7.72156649015328655494e-02, /* 0xBFB3C467, 0xE37DB0C8 */
|
|
s1 = 2.14982415960608852501e-01, /* 0x3FCB848B, 0x36E20878 */
|
|
s2 = 3.25778796408930981787e-01, /* 0x3FD4D98F, 0x4F139F59 */
|
|
s3 = 1.46350472652464452805e-01, /* 0x3FC2BB9C, 0xBEE5F2F7 */
|
|
s4 = 2.66422703033638609560e-02, /* 0x3F9B481C, 0x7E939961 */
|
|
s5 = 1.84028451407337715652e-03, /* 0x3F5E26B6, 0x7368F239 */
|
|
s6 = 3.19475326584100867617e-05, /* 0x3F00BFEC, 0xDD17E945 */
|
|
r1 = 1.39200533467621045958e+00, /* 0x3FF645A7, 0x62C4AB74 */
|
|
r2 = 7.21935547567138069525e-01, /* 0x3FE71A18, 0x93D3DCDC */
|
|
r3 = 1.71933865632803078993e-01, /* 0x3FC601ED, 0xCCFBDF27 */
|
|
r4 = 1.86459191715652901344e-02, /* 0x3F9317EA, 0x742ED475 */
|
|
r5 = 7.77942496381893596434e-04, /* 0x3F497DDA, 0xCA41A95B */
|
|
r6 = 7.32668430744625636189e-06, /* 0x3EDEBAF7, 0xA5B38140 */
|
|
w0 = 4.18938533204672725052e-01, /* 0x3FDACFE3, 0x90C97D69 */
|
|
w1 = 8.33333333333329678849e-02, /* 0x3FB55555, 0x5555553B */
|
|
w2 = -2.77777777728775536470e-03, /* 0xBF66C16C, 0x16B02E5C */
|
|
w3 = 7.93650558643019558500e-04, /* 0x3F4A019F, 0x98CF38B6 */
|
|
w4 = -5.95187557450339963135e-04, /* 0xBF4380CB, 0x8C0FE741 */
|
|
w5 = 8.36339918996282139126e-04, /* 0x3F4B67BA, 0x4CDAD5D1 */
|
|
w6 = -1.63092934096575273989e-03; /* 0xBF5AB89D, 0x0B9E43E4 */
|
|
|
|
static const double zero= 0.00000000000000000000e+00;
|
|
|
|
static double
|
|
sin_pi(double x)
|
|
{
|
|
double y,z;
|
|
int n,ix;
|
|
|
|
GET_HIGH_WORD(ix,x);
|
|
ix &= 0x7fffffff;
|
|
|
|
if(ix<0x3fd00000) return __sin(pi*x);
|
|
y = -x; /* x is assume negative */
|
|
|
|
/*
|
|
* argument reduction, make sure inexact flag not raised if input
|
|
* is an integer
|
|
*/
|
|
z = floor(y);
|
|
if(z!=y) { /* inexact anyway */
|
|
y *= 0.5;
|
|
y = 2.0*(y - floor(y)); /* y = |x| mod 2.0 */
|
|
n = (int) (y*4.0);
|
|
} else {
|
|
if(ix>=0x43400000) {
|
|
y = zero; n = 0; /* y must be even */
|
|
} else {
|
|
if(ix<0x43300000) z = y+two52; /* exact */
|
|
GET_LOW_WORD(n,z);
|
|
n &= 1;
|
|
y = n;
|
|
n<<= 2;
|
|
}
|
|
}
|
|
switch (n) {
|
|
case 0: y = __sin(pi*y); break;
|
|
case 1:
|
|
case 2: y = __cos(pi*(0.5-y)); break;
|
|
case 3:
|
|
case 4: y = __sin(pi*(one-y)); break;
|
|
case 5:
|
|
case 6: y = -__cos(pi*(y-1.5)); break;
|
|
default: y = __sin(pi*(y-2.0)); break;
|
|
}
|
|
return -y;
|
|
}
|
|
|
|
|
|
double
|
|
__ieee754_lgamma_r(double x, int *signgamp)
|
|
{
|
|
double t,y,z,nadj,p,p1,p2,p3,q,r,w;
|
|
int i,hx,lx,ix;
|
|
|
|
EXTRACT_WORDS(hx,lx,x);
|
|
|
|
/* purge off +-inf, NaN, +-0, and negative arguments */
|
|
*signgamp = 1;
|
|
ix = hx&0x7fffffff;
|
|
if(__builtin_expect(ix>=0x7ff00000, 0)) return x*x;
|
|
if(__builtin_expect((ix|lx)==0, 0))
|
|
{
|
|
if (hx < 0)
|
|
*signgamp = -1;
|
|
return one/fabs(x);
|
|
}
|
|
if(__builtin_expect(ix<0x3b900000, 0)) {
|
|
/* |x|<2**-70, return -log(|x|) */
|
|
if(hx<0) {
|
|
*signgamp = -1;
|
|
return -__ieee754_log(-x);
|
|
} else return -__ieee754_log(x);
|
|
}
|
|
if(hx<0) {
|
|
if(__builtin_expect(ix>=0x43300000, 0))
|
|
/* |x|>=2**52, must be -integer */
|
|
return fabs (x)/zero;
|
|
if (x < -2.0 && x > -28.0)
|
|
return __lgamma_neg (x, signgamp);
|
|
t = sin_pi(x);
|
|
if(t==zero) return one/fabsf(t); /* -integer */
|
|
nadj = __ieee754_log(pi/fabs(t*x));
|
|
if(t<zero) *signgamp = -1;
|
|
x = -x;
|
|
}
|
|
|
|
/* purge off 1 and 2 */
|
|
if((((ix-0x3ff00000)|lx)==0)||(((ix-0x40000000)|lx)==0)) r = 0;
|
|
/* for x < 2.0 */
|
|
else if(ix<0x40000000) {
|
|
if(ix<=0x3feccccc) { /* lgamma(x) = lgamma(x+1)-log(x) */
|
|
r = -__ieee754_log(x);
|
|
if(ix>=0x3FE76944) {y = one-x; i= 0;}
|
|
else if(ix>=0x3FCDA661) {y= x-(tc-one); i=1;}
|
|
else {y = x; i=2;}
|
|
} else {
|
|
r = zero;
|
|
if(ix>=0x3FFBB4C3) {y=2.0-x;i=0;} /* [1.7316,2] */
|
|
else if(ix>=0x3FF3B4C4) {y=x-tc;i=1;} /* [1.23,1.73] */
|
|
else {y=x-one;i=2;}
|
|
}
|
|
switch(i) {
|
|
case 0:
|
|
z = y*y;
|
|
p1 = a0+z*(a2+z*(a4+z*(a6+z*(a8+z*a10))));
|
|
p2 = z*(a1+z*(a3+z*(a5+z*(a7+z*(a9+z*a11)))));
|
|
p = y*p1+p2;
|
|
r += (p-0.5*y); break;
|
|
case 1:
|
|
z = y*y;
|
|
w = z*y;
|
|
p1 = t0+w*(t3+w*(t6+w*(t9 +w*t12))); /* parallel comp */
|
|
p2 = t1+w*(t4+w*(t7+w*(t10+w*t13)));
|
|
p3 = t2+w*(t5+w*(t8+w*(t11+w*t14)));
|
|
p = z*p1-(tt-w*(p2+y*p3));
|
|
r += (tf + p); break;
|
|
case 2:
|
|
p1 = y*(u0+y*(u1+y*(u2+y*(u3+y*(u4+y*u5)))));
|
|
p2 = one+y*(v1+y*(v2+y*(v3+y*(v4+y*v5))));
|
|
r += (-0.5*y + p1/p2);
|
|
}
|
|
}
|
|
else if(ix<0x40200000) { /* x < 8.0 */
|
|
i = (int)x;
|
|
t = zero;
|
|
y = x-(double)i;
|
|
p = y*(s0+y*(s1+y*(s2+y*(s3+y*(s4+y*(s5+y*s6))))));
|
|
q = one+y*(r1+y*(r2+y*(r3+y*(r4+y*(r5+y*r6)))));
|
|
r = half*y+p/q;
|
|
z = one; /* lgamma(1+s) = log(s) + lgamma(s) */
|
|
switch(i) {
|
|
case 7: z *= (y+6.0); /* FALLTHRU */
|
|
case 6: z *= (y+5.0); /* FALLTHRU */
|
|
case 5: z *= (y+4.0); /* FALLTHRU */
|
|
case 4: z *= (y+3.0); /* FALLTHRU */
|
|
case 3: z *= (y+2.0); /* FALLTHRU */
|
|
r += __ieee754_log(z); break;
|
|
}
|
|
/* 8.0 <= x < 2**58 */
|
|
} else if (ix < 0x43900000) {
|
|
t = __ieee754_log(x);
|
|
z = one/x;
|
|
y = z*z;
|
|
w = w0+z*(w1+y*(w2+y*(w3+y*(w4+y*(w5+y*w6)))));
|
|
r = (x-half)*(t-one)+w;
|
|
} else
|
|
/* 2**58 <= x <= inf */
|
|
r = math_narrow_eval (x*(__ieee754_log(x)-one));
|
|
/* NADJ is set for negative arguments but not otherwise,
|
|
resulting in warnings that it may be used uninitialized
|
|
although in the cases where it is used it has always been
|
|
set. */
|
|
DIAG_PUSH_NEEDS_COMMENT;
|
|
DIAG_IGNORE_NEEDS_COMMENT (4.9, "-Wmaybe-uninitialized");
|
|
if(hx<0) r = nadj - r;
|
|
DIAG_POP_NEEDS_COMMENT;
|
|
return r;
|
|
}
|
|
strong_alias (__ieee754_lgamma_r, __lgamma_r_finite)
|