glibc/stdlib/mul_n.c
Paul Eggert 5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00

361 lines
10 KiB
C

/* mpn_mul_n -- Multiply two natural numbers of length n.
Copyright (C) 1991-2019 Free Software Foundation, Inc.
This file is part of the GNU MP Library.
The GNU MP Library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.
The GNU MP Library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License
along with the GNU MP Library; see the file COPYING.LIB. If not, see
<https://www.gnu.org/licenses/>. */
#include <gmp.h>
#include "gmp-impl.h"
/* Multiply the natural numbers u (pointed to by UP) and v (pointed to by VP),
both with SIZE limbs, and store the result at PRODP. 2 * SIZE limbs are
always stored. Return the most significant limb.
Argument constraints:
1. PRODP != UP and PRODP != VP, i.e. the destination
must be distinct from the multiplier and the multiplicand. */
/* If KARATSUBA_THRESHOLD is not already defined, define it to a
value which is good on most machines. */
#ifndef KARATSUBA_THRESHOLD
#define KARATSUBA_THRESHOLD 32
#endif
/* The code can't handle KARATSUBA_THRESHOLD smaller than 2. */
#if KARATSUBA_THRESHOLD < 2
#undef KARATSUBA_THRESHOLD
#define KARATSUBA_THRESHOLD 2
#endif
/* Handle simple cases with traditional multiplication.
This is the most critical code of multiplication. All multiplies rely
on this, both small and huge. Small ones arrive here immediately. Huge
ones arrive here as this is the base case for Karatsuba's recursive
algorithm below. */
void
impn_mul_n_basecase (mp_ptr prodp, mp_srcptr up, mp_srcptr vp, mp_size_t size)
{
mp_size_t i;
mp_limb_t cy_limb;
mp_limb_t v_limb;
/* Multiply by the first limb in V separately, as the result can be
stored (not added) to PROD. We also avoid a loop for zeroing. */
v_limb = vp[0];
if (v_limb <= 1)
{
if (v_limb == 1)
MPN_COPY (prodp, up, size);
else
MPN_ZERO (prodp, size);
cy_limb = 0;
}
else
cy_limb = mpn_mul_1 (prodp, up, size, v_limb);
prodp[size] = cy_limb;
prodp++;
/* For each iteration in the outer loop, multiply one limb from
U with one limb from V, and add it to PROD. */
for (i = 1; i < size; i++)
{
v_limb = vp[i];
if (v_limb <= 1)
{
cy_limb = 0;
if (v_limb == 1)
cy_limb = mpn_add_n (prodp, prodp, up, size);
}
else
cy_limb = mpn_addmul_1 (prodp, up, size, v_limb);
prodp[size] = cy_limb;
prodp++;
}
}
void
impn_mul_n (mp_ptr prodp,
mp_srcptr up, mp_srcptr vp, mp_size_t size, mp_ptr tspace)
{
if ((size & 1) != 0)
{
/* The size is odd, the code code below doesn't handle that.
Multiply the least significant (size - 1) limbs with a recursive
call, and handle the most significant limb of S1 and S2
separately. */
/* A slightly faster way to do this would be to make the Karatsuba
code below behave as if the size were even, and let it check for
odd size in the end. I.e., in essence move this code to the end.
Doing so would save us a recursive call, and potentially make the
stack grow a lot less. */
mp_size_t esize = size - 1; /* even size */
mp_limb_t cy_limb;
MPN_MUL_N_RECURSE (prodp, up, vp, esize, tspace);
cy_limb = mpn_addmul_1 (prodp + esize, up, esize, vp[esize]);
prodp[esize + esize] = cy_limb;
cy_limb = mpn_addmul_1 (prodp + esize, vp, size, up[esize]);
prodp[esize + size] = cy_limb;
}
else
{
/* Anatolij Alekseevich Karatsuba's divide-and-conquer algorithm.
Split U in two pieces, U1 and U0, such that
U = U0 + U1*(B**n),
and V in V1 and V0, such that
V = V0 + V1*(B**n).
UV is then computed recursively using the identity
2n n n n
UV = (B + B )U V + B (U -U )(V -V ) + (B + 1)U V
1 1 1 0 0 1 0 0
Where B = 2**BITS_PER_MP_LIMB. */
mp_size_t hsize = size >> 1;
mp_limb_t cy;
int negflg;
/*** Product H. ________________ ________________
|_____U1 x V1____||____U0 x V0_____| */
/* Put result in upper part of PROD and pass low part of TSPACE
as new TSPACE. */
MPN_MUL_N_RECURSE (prodp + size, up + hsize, vp + hsize, hsize, tspace);
/*** Product M. ________________
|_(U1-U0)(V0-V1)_| */
if (mpn_cmp (up + hsize, up, hsize) >= 0)
{
mpn_sub_n (prodp, up + hsize, up, hsize);
negflg = 0;
}
else
{
mpn_sub_n (prodp, up, up + hsize, hsize);
negflg = 1;
}
if (mpn_cmp (vp + hsize, vp, hsize) >= 0)
{
mpn_sub_n (prodp + hsize, vp + hsize, vp, hsize);
negflg ^= 1;
}
else
{
mpn_sub_n (prodp + hsize, vp, vp + hsize, hsize);
/* No change of NEGFLG. */
}
/* Read temporary operands from low part of PROD.
Put result in low part of TSPACE using upper part of TSPACE
as new TSPACE. */
MPN_MUL_N_RECURSE (tspace, prodp, prodp + hsize, hsize, tspace + size);
/*** Add/copy product H. */
MPN_COPY (prodp + hsize, prodp + size, hsize);
cy = mpn_add_n (prodp + size, prodp + size, prodp + size + hsize, hsize);
/*** Add product M (if NEGFLG M is a negative number). */
if (negflg)
cy -= mpn_sub_n (prodp + hsize, prodp + hsize, tspace, size);
else
cy += mpn_add_n (prodp + hsize, prodp + hsize, tspace, size);
/*** Product L. ________________ ________________
|________________||____U0 x V0_____| */
/* Read temporary operands from low part of PROD.
Put result in low part of TSPACE using upper part of TSPACE
as new TSPACE. */
MPN_MUL_N_RECURSE (tspace, up, vp, hsize, tspace + size);
/*** Add/copy Product L (twice). */
cy += mpn_add_n (prodp + hsize, prodp + hsize, tspace, size);
if (cy)
mpn_add_1 (prodp + hsize + size, prodp + hsize + size, hsize, cy);
MPN_COPY (prodp, tspace, hsize);
cy = mpn_add_n (prodp + hsize, prodp + hsize, tspace + hsize, hsize);
if (cy)
mpn_add_1 (prodp + size, prodp + size, size, 1);
}
}
void
impn_sqr_n_basecase (mp_ptr prodp, mp_srcptr up, mp_size_t size)
{
mp_size_t i;
mp_limb_t cy_limb;
mp_limb_t v_limb;
/* Multiply by the first limb in V separately, as the result can be
stored (not added) to PROD. We also avoid a loop for zeroing. */
v_limb = up[0];
if (v_limb <= 1)
{
if (v_limb == 1)
MPN_COPY (prodp, up, size);
else
MPN_ZERO (prodp, size);
cy_limb = 0;
}
else
cy_limb = mpn_mul_1 (prodp, up, size, v_limb);
prodp[size] = cy_limb;
prodp++;
/* For each iteration in the outer loop, multiply one limb from
U with one limb from V, and add it to PROD. */
for (i = 1; i < size; i++)
{
v_limb = up[i];
if (v_limb <= 1)
{
cy_limb = 0;
if (v_limb == 1)
cy_limb = mpn_add_n (prodp, prodp, up, size);
}
else
cy_limb = mpn_addmul_1 (prodp, up, size, v_limb);
prodp[size] = cy_limb;
prodp++;
}
}
void
impn_sqr_n (mp_ptr prodp,
mp_srcptr up, mp_size_t size, mp_ptr tspace)
{
if ((size & 1) != 0)
{
/* The size is odd, the code code below doesn't handle that.
Multiply the least significant (size - 1) limbs with a recursive
call, and handle the most significant limb of S1 and S2
separately. */
/* A slightly faster way to do this would be to make the Karatsuba
code below behave as if the size were even, and let it check for
odd size in the end. I.e., in essence move this code to the end.
Doing so would save us a recursive call, and potentially make the
stack grow a lot less. */
mp_size_t esize = size - 1; /* even size */
mp_limb_t cy_limb;
MPN_SQR_N_RECURSE (prodp, up, esize, tspace);
cy_limb = mpn_addmul_1 (prodp + esize, up, esize, up[esize]);
prodp[esize + esize] = cy_limb;
cy_limb = mpn_addmul_1 (prodp + esize, up, size, up[esize]);
prodp[esize + size] = cy_limb;
}
else
{
mp_size_t hsize = size >> 1;
mp_limb_t cy;
/*** Product H. ________________ ________________
|_____U1 x U1____||____U0 x U0_____| */
/* Put result in upper part of PROD and pass low part of TSPACE
as new TSPACE. */
MPN_SQR_N_RECURSE (prodp + size, up + hsize, hsize, tspace);
/*** Product M. ________________
|_(U1-U0)(U0-U1)_| */
if (mpn_cmp (up + hsize, up, hsize) >= 0)
{
mpn_sub_n (prodp, up + hsize, up, hsize);
}
else
{
mpn_sub_n (prodp, up, up + hsize, hsize);
}
/* Read temporary operands from low part of PROD.
Put result in low part of TSPACE using upper part of TSPACE
as new TSPACE. */
MPN_SQR_N_RECURSE (tspace, prodp, hsize, tspace + size);
/*** Add/copy product H. */
MPN_COPY (prodp + hsize, prodp + size, hsize);
cy = mpn_add_n (prodp + size, prodp + size, prodp + size + hsize, hsize);
/*** Add product M (if NEGFLG M is a negative number). */
cy -= mpn_sub_n (prodp + hsize, prodp + hsize, tspace, size);
/*** Product L. ________________ ________________
|________________||____U0 x U0_____| */
/* Read temporary operands from low part of PROD.
Put result in low part of TSPACE using upper part of TSPACE
as new TSPACE. */
MPN_SQR_N_RECURSE (tspace, up, hsize, tspace + size);
/*** Add/copy Product L (twice). */
cy += mpn_add_n (prodp + hsize, prodp + hsize, tspace, size);
if (cy)
mpn_add_1 (prodp + hsize + size, prodp + hsize + size, hsize, cy);
MPN_COPY (prodp, tspace, hsize);
cy = mpn_add_n (prodp + hsize, prodp + hsize, tspace + hsize, hsize);
if (cy)
mpn_add_1 (prodp + size, prodp + size, size, 1);
}
}
/* This should be made into an inline function in gmp.h. */
void
mpn_mul_n (mp_ptr prodp, mp_srcptr up, mp_srcptr vp, mp_size_t size)
{
TMP_DECL (marker);
TMP_MARK (marker);
if (up == vp)
{
if (size < KARATSUBA_THRESHOLD)
{
impn_sqr_n_basecase (prodp, up, size);
}
else
{
mp_ptr tspace;
tspace = (mp_ptr) TMP_ALLOC (2 * size * BYTES_PER_MP_LIMB);
impn_sqr_n (prodp, up, size, tspace);
}
}
else
{
if (size < KARATSUBA_THRESHOLD)
{
impn_mul_n_basecase (prodp, up, vp, size);
}
else
{
mp_ptr tspace;
tspace = (mp_ptr) TMP_ALLOC (2 * size * BYTES_PER_MP_LIMB);
impn_mul_n (prodp, up, vp, size, tspace);
}
}
TMP_FREE (marker);
}