glibc/sysdeps/unix/sysv/linux/configure

 # Local configure fragment for sysdeps/unix/sysv/linux.

# On Linux, the default is to use libio instead of stdio.
test $stdio = default && stdio=libio

# Don't bother trying to generate any glue code to be compatible with the
# existing system library, because we are the only system library.
inhibit_glue=yes

if test -n "$sysheaders"; then
  OLD_CPPFLAGS=$CPPFLAGS
  CPPFLAGS="$CPPFLAGS $SYSINCLUDES"
fi
echo $ac_n "checking installed Linux kernel header files""... $ac_c" 1>&6
echo "configure:16: checking installed Linux kernel header files" >&5
if eval "test \"`echo '$''{'libc_cv_linux2010'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 21 "configure"
#include "confdefs.h"
#include <linux/version.h>
#if !defined LINUX_VERSION_CODE || LINUX_VERSION_CODE <  (2 *65536+ 0 *256+ 10) /* 2.0.10 */
eat flaming death
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "eat flaming death" >/dev/null 2>&1; then
  rm -rf conftest*
  libc_cv_linux2010='TOO OLD!'
else
  rm -rf conftest*
  libc_cv_linux2010='2.0.10 or later'
fi
rm -f conftest*

fi

echo "$ac_t""$libc_cv_linux2010" 1>&6
if test "$libc_cv_linux2010" != '2.0.10 or later'; then
  { echo "configure: error: GNU libc requires kernel header files from
Linux 2.0.10 or later to be installed before configuring.
The kernel header files are found usually in /usr/include/asm and
/usr/include/linux; make sure these directories use files from
Linux 2.0.10 or later.  This check uses <linux/version.h>, so
make sure that file was built correctly when installing the kernel header
files.  To use kernel headers not from /usr/include/linux, use the
configure option --with-headers." 1>&2; exit 1; }
fi

# If the user gave a minimal version number test whether the available
# kernel headers are young enough.  Additionally we have minimal
# kernel versions for some architectures.
case "$machine" in
  mips*)
    arch_minimum_kernel=2.2.15
    ;;
  sh*)
    arch_minimum_kernel=2.3.99
    ;;
  ia64*)
    arch_minimum_kernel=2.4.0
    ;;
  hppa*)
    arch_minimum_kernel=2.3.99
    ;;
  *)
    arch_minimum_kernel=2.0.10
    ;;
esac
if test -n "$minimum_kernel"; then
  
  user_version=$((`echo "$minimum_kernel.0.0.0" | sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\1 \* 65536 + \2 \* 256 + \3/'`))
  arch_version=$((`echo "$arch_minimum_kernel.0.0.0" | sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/\1 \* 65536 + \2 \* 256 + \3/'`))
  
  if test $user_version -lt $arch_version; then
    echo "configure: warning: minimum kernel version reset to $arch_minimum_kernel" 1>&2
    minimum_kernel=$arch_minimum_kernel
  fi
else
  if test $arch_minimum_kernel != '2.0.10'; then
    minimum_kernel=$arch_minimum_kernel
  fi
fi

if test -n "$minimum_kernel"; then
  echo $ac_n "checking for kernel header at least $minimum_kernel""... $ac_c" 1>&6
echo "configure:89: checking for kernel header at least $minimum_kernel" >&5
  decnum=`echo "$minimum_kernel.0.0.0" | sed 's/\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*/(\1 * 65536 + \2 * 256 + \3)/'`;
  cat > conftest.$ac_ext <<EOF
#line 92 "configure"
#include "confdefs.h"
#include <linux/version.h>
#if LINUX_VERSION_CODE < $decnum
eat flaming death
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "eat flaming death" >/dev/null 2>&1; then
  rm -rf conftest*
  libc_minimum_kernel='too old!'
else
  rm -rf conftest*
  libc_minimum_kernel=ok
fi
rm -f conftest*

  echo "$ac_t""$libc_minimum_kernel" 1>&6
  if test "$libc_minimum_kernel" = ok; then
    cat >> confdefs.h <<EOF
#define __LINUX_KERNEL_VERSION $decnum
EOF

  else
    { echo "configure: error: *** The available kernel headers are older than the requested
*** compatible kernel version" 1>&2; exit 1; }
  fi
fi

if test -n "$sysheaders"; then
  CPPFLAGS=$OLD_CPPFLAGS
fi
# The Linux filesystem standard prescribes where to place "essential"
# files.  I.e., when the installation prefix is "/usr" we have to place
# shared library objects and the configuration files on the root partition
# in /lib and /etc.
if test "$prefix" = "/usr" -o "$prefix" = "/usr/"; then
  # 64bit libraries on sparc go to /lib64 and not /lib
  if test "$machine" = "sparc/sparc64"; then
    libc_cv_slibdir="/lib64"
    if test "$libdir" = '${exec_prefix}/lib'; then
      libdir='${exec_prefix}/lib64';
      # Locale data can be shared between 32bit and 64bit libraries
      libc_cv_localedir='${exec_prefix}/lib/locale'
    fi
  else
    libc_cv_slibdir="/lib"
  fi
  # Allow the user to override the path with --sysconfdir
  if test $sysconfdir = '${prefix}/etc'; then
    libc_cv_sysconfdir=/etc
  else
    libc_cv_sysconfdir=$sysconfdir
   fi
  libc_cv_rootsbindir="/sbin"
fi

# Under Linux the LinuxThreads add-on should be available.
case $add_ons in
  # It is available.  Good.
  *linuxthreads*)
    message=
    ;;
  *)
    message="\
*** WARNING: Are you sure you do not want to use the \`linuxthreads'
*** add-on?"
    ;;
esac

if test "$message"; then
  if test $enable_sanity = yes; then
    echo "\
*** You should not compile the GNU libc without the \`linuxthreads'
*** add-on.  Not using them risks being incompatible with the
*** libraries of other systems.  Consider getting the add-on and restarting
*** the configuration.
*** If you really mean to not use this add-on, run configure again
*** using the extra parameter \`--disable-sanity-checks'."
    exit 1
  else
    echo "$message"
  fi
fi

# One Linux we use ldconfig.
use_ldconfig=yes

# We need some extensions to the `ldd' script.

case "$machine" in
  i[3456]86* | m68*)
    ldd_rewrite_script=../sysdeps/unix/sysv/linux/ldd-rewrite.sed
    ;;
  sparc*)
    ldd_rewrite_script=../sysdeps/unix/sysv/linux/sparc/ldd-rewrite.sed
    ;;
  *)
    ;;
esac


if test $host = $build; then
  # If $prefix/include/{net,scsi} are symlinks, make install will
  # clobber what they're linked to (probably a kernel tree).
  # test -L ought to work on all Linux boxes.
  if test "x$prefix" != xNONE; then
    ac_prefix=$prefix
  else
    ac_prefix=$ac_default_prefix
  fi
  echo $ac_n "checking for symlinks in ${ac_prefix}/include""... $ac_c" 1>&6
echo "configure:204: checking for symlinks in ${ac_prefix}/include" >&5
  ac_message=
  if test -L ${ac_prefix}/include/net; then
    ac_message="$ac_message
   ${ac_prefix}/include/net is a symlink"
  fi
  if test -L ${ac_prefix}/include/scsi; then
    ac_message="$ac_message
   ${ac_prefix}/include/scsi is a symlink"
  fi
  if test -n "$ac_message"; then
    { echo "configure: error: $ac_message
\`make install' will destroy the target of the link(s).
Delete the links and re-run configure, or better still, move the entire
${ac_prefix}/include directory out of the way." 1>&2; exit 1; }
  else
    echo "$ac_t""ok" 1>&6
  fi
fi