mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-13 14:50:17 +00:00
813378e9fe
This patch obsoletes support for SVID libm error handling (the system where a user-defined function matherr is called on a libm function error; only enabled if you also set _LIB_VERSION = _SVID_ or _LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global variable to control libm error handling. matherr and _LIB_VERSION are made into compat symbols, not supported for new ports or for static linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_, so disabling errno setting for some functions) is also removed, and all the related definitions are removed from math.h. The manual already recommends against using matherr, and it's already not supported for _Float128 functions (those use new wrappers that don't support matherr, only errno) - this patch means that it becomes possible to e.g. add sinf32 as an alias to sinf without that resulting in undesired matherr support in sinf32 for existing glibc ports. matherr support is not part of any standard supported by glibc (it was removed in XPG4). Because matherr is a function to be defined by the user, of course user programs defining such a function will still continue to link; it just quietly won't be used. If they try to write to the library's copy of _LIB_VERSION to enable SVID error handling, however, they will get a link error (but if they define their own _LIB_VERSION variable, they won't). I expect the most likely case of build failures from this patch to be programs with unconditional cargo-culted uses of -lieee (based on a notion of "I want IEEE floating point", not any actual requirement for that library). Ideally, the new-port-or-static-linking case would use the new wrappers used for _Float128. This is not implemented in this patch, because of the complication of architecture-specific (powerpc32 and sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard directly. Thus, the old wrappers and __kernel_standard are still built unconditionally, and _LIB_VERSION still exists in static libm. But when the old wrappers and __kernel_standard are built in the non-compat case, _LIB_VERSION and matherr are defined as macros so code to support those features isn't actually built into static libm or new ports' shared libm after this patch. I intend to move to the new wrappers for static libm and new ports in followup patches. I believe the sqrt wrappers for powerpc32 and sparc can reasonably be removed. GCC already optimizes the normal case of sqrt by generating code that uses a hardware instruction and only calls the sqrt function if the argument was negative (if -fno-math-errno, of course, it just uses the hardware instruction without any check for negative argument being needed). Thus those wrappers will only actually get called in the case of negative arguments, which is not a case it makes sense to optimize for. But even without removing the powerpc32 and sparc wrappers it should still be possible to move to the new wrappers for static libm and new ports, just without having those dubious architecture-specific optimizations in static libm. Everything said about matherr equally applies to matherrf and matherrl (IA64-specific, undocumented), except that the structure of IA64 libm means it won't be converted to using the new wrappers (it doesn't use the old ones either, but its own error-handling code instead). As with other tests of compat symbols, I expect test-matherr and test-matherr-2 to need to become appropriately conditional once we have a system for disabling such tests for ports too new to have the relevant symbols. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove. [__USE_MISC] (_LIB_VERSION): Likewise. [__USE_MISC] (struct exception): Likewise. [__USE_MISC] (matherr): Likewise. [__USE_MISC] (DOMAIN): Likewise. [__USE_MISC] (SING): Likewise. [__USE_MISC] (OVERFLOW): Likewise. [__USE_MISC] (UNDERFLOW): Likewise. [__USE_MISC] (TLOSS): Likewise. [__USE_MISC] (PLOSS): Likewise. [__USE_MISC] (HUGE): Likewise. [__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC]. * math/math-svid-compat.h: New file. * conform/linknamespace.pl (@whitelist): Remove matherr, matherrf and matherrl. * include/math.h [!_ISOMAC] (__matherr): Remove. * manual/arith.texi (FP Exceptions): Do not document matherr. * math/Makefile (tests): Change test-matherr to test-matherr-3. (tests-internal): New variable. (install-lib): Do not add libieee.a. (non-lib.a): Likewise. (extra-objs): Do not add libieee.a and ieee-math.o. (CPPFLAGS-s_lib_version.c): Remove variable. ($(objpfx)libieee.a): Remove rule. ($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm). * math/ieee-math.c: Remove. * math/libm-test-support.c (matherr): Remove. * math/test-matherr.c: Use <support/test-driver.c>. Add copyright and license notices. Include <math-svid-compat.h> and <shlib-compat.h>. (matherr): Undefine as macro. Use compat_symbol_reference. (_LIB_VERSION): Likewise. * math/test-matherr-2.c: New file. * math/test-matherr-3.c: Likewise. * sysdeps/generic/math_private.h (__kernel_standard): Remove declaration. (__kernel_standard_f): Likewise. (__kernel_standard_l): Likewise. * sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (_LIB_VERSION): Undefine as macro. (_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define only if [LIBM_SVID_COMPAT || !defined SHARED]. If [LIBM_SVID_COMPAT], use compat_symbol. * sysdeps/ieee754/s_matherr.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (matherr): Undefine as macro. (__matherr): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>. [_LIBC && LIBM_SVID_COMPAT] (matherrf): Use compat_symbol_reference. [_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise. [_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro. [_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise. * sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>. (MATHERR_D): Remove declaration. [!_LIBC] (_LIB_VERSION_TYPE): Likewise [!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise. [LIBM_BUILD] (pmatherrf): Likewise. [LIBM_BUILD] (pmatherr): Likewise. [LIBM_BUILD] (pmatherrl): Likewise. (DOMAIN): Likewise. (SING): Likewise. (OVERFLOW): Likewise. (UNDERFLOW): Likewise. (TLOSS): Likewise. (PLOSS): Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>. (__matherrf): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>. (__matherrl): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * math/lgamma-compat.h: Include <math-svid-compat.h>. * math/w_acos_compat.c: Likewise. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_main.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_main.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_main.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_scalb_compat.c: Likewise. * math/w_scalbf_compat.c: Likewise. * math/w_scalbl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
1017 lines
48 KiB
C
1017 lines
48 KiB
C
/* file: libm_support.h */
|
|
|
|
|
|
/*
|
|
// Copyright (c) 2000 - 2004, Intel Corporation
|
|
// All rights reserved.
|
|
//
|
|
// Contributed 2000 by the Intel Numerics Group, Intel Corporation
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are
|
|
// met:
|
|
//
|
|
// * Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// * Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// * The name of Intel Corporation may not be used to endorse or promote
|
|
// products derived from this software without specific prior written
|
|
// permission.
|
|
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS
|
|
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
|
|
// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING
|
|
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// Intel Corporation is the author of this code, and requests that all
|
|
// problem reports or change requests be submitted to it directly at
|
|
// http://www.intel.com/software/products/opensource/libraries/num.htm.
|
|
//
|
|
|
|
// History: 02/02/2000 Initial version
|
|
// 2/28/2000 added tags for logb and nextafter
|
|
// 3/22/2000 Changes to support _LIB_VERSIONIMF variable
|
|
// and filled some enum gaps. Added support for C99.
|
|
// 5/31/2000 added prototypes for __libm_frexp_4l/8l
|
|
// 8/10/2000 Changed declaration of _LIB_VERSIONIMF to work for library
|
|
// builds and other application builds (precompiler directives).
|
|
// 8/11/2000 Added pointers-to-matherr-functions declarations to allow
|
|
// for user-defined matherr functions in the dll build.
|
|
// 12/07/2000 Added scalbn error_types values.
|
|
// 5/01/2001 Added error_types values for C99 nearest integer
|
|
// functions.
|
|
// 6/07/2001 Added error_types values for fdim.
|
|
// 6/18/2001 Added include of complex_support.h.
|
|
// 8/03/2001 Added error_types values for nexttoward, scalbln.
|
|
// 8/23/2001 Corrected tag numbers from 186 and higher.
|
|
// 8/27/2001 Added check for long int and long long int definitions.
|
|
// 12/10/2001 Added error_types for erfc.
|
|
// 12/27/2001 Added error_types for degree argument functions.
|
|
// 01/02/2002 Added error_types for tand, cotd.
|
|
// 01/04/2002 Delete include of complex_support.h
|
|
// 01/23/2002 Deleted prototypes for __libm_frexp*. Added check for
|
|
// multiple int, long int, and long long int definitions.
|
|
// 05/20/2002 Added error_types for cot.
|
|
// 06/27/2002 Added error_types for sinhcosh.
|
|
// 12/05/2002 Added error_types for annuity and compound
|
|
// 04/10/2003 Added error_types for tgammal/tgamma/tgammaf
|
|
// 05/16/2003 FP-treatment macros copied here from IA32 libm_support.h
|
|
// 06/02/2003 Added pad into struct fp80 (12/16 bytes).
|
|
// 08/01/2003 Added struct ker80 and macros for multiprecision addition,
|
|
// subtraction, multiplication, division, square root.
|
|
// 08/07/2003 History section updated.
|
|
// 09/03/2003 ALIGN(n) macro added.
|
|
// 10/01/2003 LDOUBLE_ALIGN and fp80 corrected on linux to 16 bytes.
|
|
// 11/24/2004 Added ifdef around definitions of INT32/64
|
|
// 12/15/2004 Added error_types for exp10, nextafter, nexttoward
|
|
// underflow. Moved error codes into libm_error_codes.h.
|
|
//
|
|
*/
|
|
|
|
#ifndef __LIBM_SUPPORT_H_INCLUDED__
|
|
#define __LIBM_SUPPORT_H_INCLUDED__
|
|
|
|
#include <math-svid-compat.h>
|
|
|
|
#ifndef _LIBC
|
|
#if !(defined(_WIN32) || defined(_WIN64))
|
|
# pragma const_seg(".rodata") /* place constant data in text (code) section */
|
|
#endif
|
|
|
|
#if defined(__ICC) || defined(__ICL) || defined(__ECC) || defined(__ECL)
|
|
# pragma warning( disable : 1682 ) /* #1682: ixplicit conversion of a 64-bit integral type to a smaller integral type (potential portability problem) */
|
|
# pragma warning( disable : 1683 ) /* #1683: explicit conversion of a 64-bit integral type to a smaller integral type (potential portability problem) */
|
|
#endif
|
|
#endif
|
|
|
|
/* macros to form a double value in hex representation (unsigned int type) */
|
|
|
|
#define DOUBLE_HEX(hi,lo) 0x##lo,0x##hi /*LITTLE_ENDIAN*/
|
|
|
|
#include "libm_cpu_defs.h"
|
|
|
|
#if !(defined (IA64))
|
|
# include "libm_dll.h"
|
|
# include "libm_dispatch.h"
|
|
#endif
|
|
|
|
#include "libm_error_codes.h"
|
|
|
|
struct exceptionf
|
|
{
|
|
int type;
|
|
char *name;
|
|
float arg1, arg2, retval;
|
|
};
|
|
|
|
# ifdef __cplusplus
|
|
struct __exception
|
|
{
|
|
int type;
|
|
char *name;
|
|
double arg1, arg2, retval;
|
|
};
|
|
# else
|
|
|
|
# ifndef _LIBC
|
|
struct exception
|
|
{
|
|
int type;
|
|
char *name;
|
|
double arg1, arg2, retval;
|
|
};
|
|
# endif
|
|
# endif
|
|
|
|
struct exceptionl
|
|
{
|
|
int type;
|
|
char *name;
|
|
long double arg1, arg2, retval;
|
|
};
|
|
|
|
#if (defined (_MS_) && defined (IA64))
|
|
#define MATHERR_F _matherrf
|
|
#define MATHERR_D _matherr
|
|
#else
|
|
#define MATHERR_F matherrf
|
|
#define MATHERR_D matherr
|
|
#endif
|
|
|
|
# ifdef __cplusplus
|
|
#define EXC_DECL_D __exception
|
|
#else
|
|
// exception is a reserved name in C++
|
|
#define EXC_DECL_D exception
|
|
#endif
|
|
|
|
extern int MATHERR_F(struct exceptionf*);
|
|
extern int matherrl(struct exceptionl*);
|
|
|
|
/* memory format definitions (LITTLE_ENDIAN only) */
|
|
|
|
#if !(defined(SIZE_INT_32) || defined(SIZE_INT_64))
|
|
# error "You need to define SIZE_INT_32 or SIZE_INT_64"
|
|
#endif
|
|
|
|
#if (defined(SIZE_INT_32) && defined(SIZE_INT_64))
|
|
#error multiple integer size definitions; define SIZE_INT_32 or SIZE_INT_64
|
|
#endif
|
|
|
|
#if !(defined(SIZE_LONG_32) || defined(SIZE_LONG_64))
|
|
# error "You need to define SIZE_LONG_32 or SIZE_LONG_64"
|
|
#endif
|
|
|
|
#if (defined(SIZE_LONG_32) && defined(SIZE_LONG_64))
|
|
#error multiple integer size definitions; define SIZE_LONG_32 or SIZE_LONG_64
|
|
#endif
|
|
|
|
#if !defined(__USE_EXTERNAL_FPMEMTYP_H__)
|
|
|
|
#define BIAS_32 0x007F
|
|
#define BIAS_64 0x03FF
|
|
#define BIAS_80 0x3FFF
|
|
|
|
#define MAXEXP_32 0x00FE
|
|
#define MAXEXP_64 0x07FE
|
|
#define MAXEXP_80 0x7FFE
|
|
|
|
#define EXPINF_32 0x00FF
|
|
#define EXPINF_64 0x07FF
|
|
#define EXPINF_80 0x7FFF
|
|
|
|
struct fp32 { /*// sign:1 exponent:8 significand:23 (implied leading 1)*/
|
|
#if defined(SIZE_INT_32)
|
|
unsigned significand:23;
|
|
unsigned exponent:8;
|
|
unsigned sign:1;
|
|
#elif defined(SIZE_INT_64)
|
|
unsigned significand:23;
|
|
unsigned exponent:8;
|
|
unsigned sign:1;
|
|
#endif
|
|
};
|
|
|
|
struct fp64 { /*/ sign:1 exponent:11 significand:52 (implied leading 1)*/
|
|
#if defined(SIZE_INT_32)
|
|
unsigned lo_significand:32;
|
|
unsigned hi_significand:20;
|
|
unsigned exponent:11;
|
|
unsigned sign:1;
|
|
#elif defined(SIZE_INT_64)
|
|
unsigned significand:52;
|
|
unsigned exponent:11;
|
|
unsigned sign:1;
|
|
#endif
|
|
};
|
|
|
|
struct fp80 { /*/ sign:1 exponent:15 significand:64 (NO implied bits) */
|
|
#if defined(SIZE_INT_32)
|
|
unsigned lo_significand;
|
|
unsigned hi_significand;
|
|
unsigned exponent:15;
|
|
unsigned sign:1;
|
|
#elif defined(SIZE_INT_64)
|
|
unsigned significand;
|
|
unsigned exponent:15;
|
|
unsigned sign:1;
|
|
#endif
|
|
unsigned pad:16;
|
|
#if !(defined(__unix__) && defined(__i386__))
|
|
unsigned padwin:32;
|
|
#endif
|
|
};
|
|
|
|
#endif /*__USE_EXTERNAL_FPMEMTYP_H__*/
|
|
|
|
#if !(defined(opensource))
|
|
typedef __int32 INT32;
|
|
typedef signed __int32 SINT32;
|
|
typedef unsigned __int32 UINT32;
|
|
|
|
typedef __int64 INT64;
|
|
typedef signed __int64 SINT64;
|
|
typedef unsigned __int64 UINT64;
|
|
#else
|
|
typedef int INT32;
|
|
typedef signed int SINT32;
|
|
typedef unsigned int UINT32;
|
|
|
|
typedef long long INT64;
|
|
typedef signed long long SINT64;
|
|
typedef unsigned long long UINT64;
|
|
#endif
|
|
|
|
#if (defined(_WIN32) || defined(_WIN64)) /* Windows */
|
|
# define I64CONST(bits) 0x##bits##i64
|
|
# define U64CONST(bits) 0x##bits##ui64
|
|
#elif (defined(__linux__) && defined(_M_IA64)) /* Linux,64 */
|
|
# define I64CONST(bits) 0x##bits##L
|
|
# define U64CONST(bits) 0x##bits##uL
|
|
#else /* Linux,32 */
|
|
# define I64CONST(bits) 0x##bits##LL
|
|
# define U64CONST(bits) 0x##bits##uLL
|
|
#endif
|
|
|
|
struct ker80 {
|
|
union {
|
|
long double ldhi;
|
|
struct fp80 fphi;
|
|
};
|
|
union {
|
|
long double ldlo;
|
|
struct fp80 fplo;
|
|
};
|
|
int ex;
|
|
};
|
|
|
|
/* Addition: x+y */
|
|
/* The result is sum rhi+rlo */
|
|
/* Temporary variables: t1 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no overflow (algorithm by D.Knuth) */
|
|
#define __LIBM_ADDL1_K80( rhi,rlo,x,y, t1 ) \
|
|
rhi = x + y; \
|
|
rlo = rhi - x; \
|
|
t1 = rhi - rlo; \
|
|
rlo = y - rlo; \
|
|
t1 = x - t1; \
|
|
rlo = rlo + t1;
|
|
|
|
/* Addition: (xhi+xlo) + (yhi+ylo) */
|
|
/* The result is sum rhi+rlo */
|
|
/* Temporary variables: t1 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no overflow (algorithm by T.J.Dekker) */
|
|
#define __LIBM_ADDL2_K80( rhi,rlo,xhi,xlo,yhi,ylo, t1 ) \
|
|
rlo = xhi+yhi; \
|
|
if ( VALUE_GT_80(FP80(xhi),FP80(yhi)) ) { \
|
|
t1=xhi-rlo;t1=t1+yhi;t1=t1+ylo;t1=t1+xlo; \
|
|
} else { \
|
|
t1=yhi-rlo;t1=t1+xhi;t1=t1+xlo;t1=t1+ylo; \
|
|
} \
|
|
rhi=rlo+t1; \
|
|
rlo=rlo-rhi;rlo=rlo+t1;
|
|
|
|
/* Addition: r=x+y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Temporary variables: t1 */
|
|
/* Correct if x and y belong to interval [2^-8000;2^8000], */
|
|
/* or when one or both of them are zero */
|
|
#if defined(SIZE_INT_32)
|
|
#define __LIBM_ADDL_K80(r,x,y, t1) \
|
|
if ( ((y)->ex+(y)->fphi.exponent-134 < \
|
|
(x)->ex+(x)->fphi.exponent) && \
|
|
((x)->ex+(x)->fphi.exponent < \
|
|
(y)->ex+(y)->fphi.exponent+134) && \
|
|
!SIGNIFICAND_ZERO_80(&((x)->fphi)) && \
|
|
!SIGNIFICAND_ZERO_80(&((y)->fphi)) ) \
|
|
{ \
|
|
/* y/2^134 < x < y*2^134, */ \
|
|
/* and x,y are nonzero finite numbers */ \
|
|
if ( (x)->ex != (y)->ex ) { \
|
|
/* adjust x->ex to y->ex */ \
|
|
/* t1 = 2^(x->ex - y->ex) */ \
|
|
FP80(t1)->sign = 0; \
|
|
FP80(t1)->exponent = BIAS_80 + (x)->ex-(y)->ex; \
|
|
/* exponent is correct because */ \
|
|
/* |x->ex - y->ex| = */ \
|
|
/* = | (x->ex + x->fphi.exponent) - */ \
|
|
/* -(y->ex + y->fphi.exponent) + */ \
|
|
/* + y->fphi.exponent - */ \
|
|
/* - x->fphi.exponent | < */ \
|
|
/* < | (x->ex+x->fphi.exponent) - */ \
|
|
/* -(y->ex+y->fphi.exponent) | + */ \
|
|
/* +| y->fphi.exponent - */ \
|
|
/* -x->fphi.exponent | < */ \
|
|
/* < 134 + 16000 */ \
|
|
FP80(t1)->hi_significand = 0x80000000; \
|
|
FP80(t1)->lo_significand = 0x00000000; \
|
|
(x)->ex = (y)->ex; \
|
|
(x)->ldhi *= t1; \
|
|
(x)->ldlo *= t1; \
|
|
} \
|
|
/* r==x+y */ \
|
|
(r)->ex = (y)->ex; \
|
|
__LIBM_ADDL2_K80( (r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo, (y)->ldhi,(y)->ldlo, t1 ); \
|
|
} else if ( SIGNIFICAND_ZERO_80(&((x)->fphi)) || \
|
|
((y)->ex+(y)->fphi.exponent-BIAS_80 - 134 >= \
|
|
(x)->ex+(x)->fphi.exponent-BIAS_80) ) \
|
|
{ \
|
|
/* |x|<<|y| */ \
|
|
*(r) = *(y); \
|
|
} else { \
|
|
/* |y|<<|x| */ \
|
|
*(r) = *(x); \
|
|
}
|
|
#elif defined(SIZE_INT_64)
|
|
#define __LIBM_ADDL_K80(r,x,y, t1) \
|
|
if ( ((y)->ex+(y)->fphi.exponent-134 < \
|
|
(x)->ex+(x)->fphi.exponent) && \
|
|
((x)->ex+(x)->fphi.exponent < \
|
|
(y)->ex+(y)->fphi.exponent+134) && \
|
|
!SIGNIFICAND_ZERO_80(&((x)->fphi)) && \
|
|
!SIGNIFICAND_ZERO_80(&((y)->fphi)) ) \
|
|
{ \
|
|
/* y/2^134 < x < y*2^134, */ \
|
|
/* and x,y are nonzero finite numbers */ \
|
|
if ( (x)->ex != (y)->ex ) { \
|
|
/* adjust x->ex to y->ex */ \
|
|
/* t1 = 2^(x->ex - y->ex) */ \
|
|
FP80(t1)->sign = 0; \
|
|
FP80(t1)->exponent = BIAS_80 + (x)->ex-(y)->ex; \
|
|
/* exponent is correct because */ \
|
|
/* |x->ex - y->ex| = */ \
|
|
/* = | (x->ex + x->fphi.exponent) - */ \
|
|
/* -(y->ex + y->fphi.exponent) + */ \
|
|
/* + y->fphi.exponent - */ \
|
|
/* - x->fphi.exponent | < */ \
|
|
/* < | (x->ex+x->fphi.exponent) - */ \
|
|
/* -(y->ex+y->fphi.exponent) | + */ \
|
|
/* +| y->fphi.exponent - */ \
|
|
/* -x->fphi.exponent | < */ \
|
|
/* < 134 + 16000 */ \
|
|
FP80(t1)->significand = 0x8000000000000000; \
|
|
(x)->ex = (y)->ex; \
|
|
(x)->ldhi *= t1; \
|
|
(x)->ldlo *= t1; \
|
|
} \
|
|
/* r==x+y */ \
|
|
(r)->ex = (y)->ex; \
|
|
__LIBM_ADDL2_K80( (r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo, (y)->ldhi,(y)->ldlo, t1 ); \
|
|
} else if ( SIGNIFICAND_ZERO_80(&((x)->fphi)) || \
|
|
((y)->ex+(y)->fphi.exponent-BIAS_80 - 134 >= \
|
|
(x)->ex+(x)->fphi.exponent-BIAS_80) ) \
|
|
{ \
|
|
/* |x|<<|y| */ \
|
|
*(r) = *(y); \
|
|
} else { \
|
|
/* |y|<<|x| */ \
|
|
*(r) = *(x); \
|
|
}
|
|
#endif
|
|
|
|
/* Addition: r=x+y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Temporary variables: t1 */
|
|
/* Correct for any finite x and y */
|
|
#define __LIBM_ADDL_NORM_K80(r,x,y, t1) \
|
|
if ( ((x)->fphi.exponent-BIAS_80<-8000) || \
|
|
((x)->fphi.exponent-BIAS_80>+8000) || \
|
|
((y)->fphi.exponent-BIAS_80<-8000) || \
|
|
((y)->fphi.exponent-BIAS_80>+8000) ) \
|
|
{ \
|
|
__libm_normalizel_k80(x); \
|
|
__libm_normalizel_k80(y); \
|
|
} \
|
|
__LIBM_ADDL_K80(r,x,y, t1)
|
|
|
|
/* Subtraction: x-y */
|
|
/* The result is sum rhi+rlo */
|
|
/* Temporary variables: t1 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no overflow (algorithm by D.Knuth) */
|
|
#define __LIBM_SUBL1_K80( rhi, rlo, x, y, t1 ) \
|
|
rhi = x - y; \
|
|
rlo = rhi - x; \
|
|
t1 = rhi - rlo; \
|
|
rlo = y + rlo; \
|
|
t1 = x - t1; \
|
|
rlo = t1 - rlo;
|
|
|
|
/* Subtraction: (xhi+xlo) - (yhi+ylo) */
|
|
/* The result is sum rhi+rlo */
|
|
/* Temporary variables: t1 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no overflow (algorithm by T.J.Dekker) */
|
|
#define __LIBM_SUBL2_K80( rhi,rlo,xhi,xlo,yhi,ylo, t1 ) \
|
|
rlo = xhi-yhi; \
|
|
if ( VALUE_GT_80(FP80(xhi),FP80(yhi)) ) { \
|
|
t1=xhi-rlo;t1=t1-yhi;t1=t1-ylo;t1=t1+xlo; \
|
|
} else { \
|
|
t1=yhi+rlo;t1=xhi-t1;t1=t1+xlo;t1=t1-ylo; \
|
|
} \
|
|
rhi=rlo+t1; \
|
|
rlo=rlo-rhi;rlo=rlo+t1;
|
|
|
|
/* Subtraction: r=x-y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Temporary variables: t1 */
|
|
/* Correct if x and y belong to interval [2^-8000;2^8000], */
|
|
/* or when one or both of them are zero */
|
|
#if defined(SIZE_INT_32)
|
|
#define __LIBM_SUBL_K80(r,x,y, t1) \
|
|
if ( ((y)->ex+(y)->fphi.exponent-134 < \
|
|
(x)->ex+(x)->fphi.exponent) && \
|
|
((x)->ex+(x)->fphi.exponent < \
|
|
(y)->ex+(y)->fphi.exponent+134) && \
|
|
!SIGNIFICAND_ZERO_80(&((x)->fphi)) && \
|
|
!SIGNIFICAND_ZERO_80(&((y)->fphi)) ) \
|
|
{ \
|
|
/* y/2^134 < x < y*2^134, */ \
|
|
/* and x,y are nonzero finite numbers */ \
|
|
if ( (x)->ex != (y)->ex ) { \
|
|
/* adjust x->ex to y->ex */ \
|
|
/* t1 = 2^(x->ex - y->ex) */ \
|
|
FP80(t1)->sign = 0; \
|
|
FP80(t1)->exponent = BIAS_80 + (x)->ex-(y)->ex; \
|
|
/* exponent is correct because */ \
|
|
/* |x->ex - y->ex| = */ \
|
|
/* = | (x->ex + x->fphi.exponent) - */ \
|
|
/* -(y->ex + y->fphi.exponent) + */ \
|
|
/* + y->fphi.exponent - */ \
|
|
/* - x->fphi.exponent | < */ \
|
|
/* < | (x->ex+x->fphi.exponent) - */ \
|
|
/* -(y->ex+y->fphi.exponent) | + */ \
|
|
/* +| y->fphi.exponent - */ \
|
|
/* -x->fphi.exponent | < */ \
|
|
/* < 134 + 16000 */ \
|
|
FP80(t1)->hi_significand = 0x80000000; \
|
|
FP80(t1)->lo_significand = 0x00000000; \
|
|
(x)->ex = (y)->ex; \
|
|
(x)->ldhi *= t1; \
|
|
(x)->ldlo *= t1; \
|
|
} \
|
|
/* r==x+y */ \
|
|
(r)->ex = (y)->ex; \
|
|
__LIBM_SUBL2_K80( (r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo, (y)->ldhi,(y)->ldlo, t1 ); \
|
|
} else if ( SIGNIFICAND_ZERO_80(&((x)->fphi)) || \
|
|
((y)->ex+(y)->fphi.exponent-BIAS_80 - 134 >= \
|
|
(x)->ex+(x)->fphi.exponent-BIAS_80) ) \
|
|
{ \
|
|
/* |x|<<|y| */ \
|
|
(r)->ex = (y)->ex; \
|
|
(r)->ldhi = -((y)->ldhi); \
|
|
(r)->ldlo = -((y)->ldlo); \
|
|
} else { \
|
|
/* |y|<<|x| */ \
|
|
*(r) = *(x); \
|
|
}
|
|
#elif defined(SIZE_INT_64)
|
|
#define __LIBM_SUBL_K80(r,x,y, t1) \
|
|
if ( ((y)->ex+(y)->fphi.exponent-134 < \
|
|
(x)->ex+(x)->fphi.exponent) && \
|
|
((x)->ex+(x)->fphi.exponent < \
|
|
(y)->ex+(y)->fphi.exponent+134) && \
|
|
!SIGNIFICAND_ZERO_80(&((x)->fphi)) && \
|
|
!SIGNIFICAND_ZERO_80(&((y)->fphi)) ) \
|
|
{ \
|
|
/* y/2^134 < x < y*2^134, */ \
|
|
/* and x,y are nonzero finite numbers */ \
|
|
if ( (x)->ex != (y)->ex ) { \
|
|
/* adjust x->ex to y->ex */ \
|
|
/* t1 = 2^(x->ex - y->ex) */ \
|
|
FP80(t1)->sign = 0; \
|
|
FP80(t1)->exponent = BIAS_80 + (x)->ex-(y)->ex; \
|
|
/* exponent is correct because */ \
|
|
/* |x->ex - y->ex| = */ \
|
|
/* = | (x->ex + x->fphi.exponent) - */ \
|
|
/* -(y->ex + y->fphi.exponent) + */ \
|
|
/* + y->fphi.exponent - */ \
|
|
/* - x->fphi.exponent | < */ \
|
|
/* < | (x->ex+x->fphi.exponent) - */ \
|
|
/* -(y->ex+y->fphi.exponent) | + */ \
|
|
/* +| y->fphi.exponent - */ \
|
|
/* -x->fphi.exponent | < */ \
|
|
/* < 134 + 16000 */ \
|
|
FP80(t1)->significand = 0x8000000000000000; \
|
|
(x)->ex = (y)->ex; \
|
|
(x)->ldhi *= t1; \
|
|
(x)->ldlo *= t1; \
|
|
} \
|
|
/* r==x+y */ \
|
|
(r)->ex = (y)->ex; \
|
|
__LIBM_SUBL2_K80( (r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo, (y)->ldhi,(y)->ldlo, t1 ); \
|
|
} else if ( SIGNIFICAND_ZERO_80(&((x)->fphi)) || \
|
|
((y)->ex+(y)->fphi.exponent-BIAS_80 - 134 >= \
|
|
(x)->ex+(x)->fphi.exponent-BIAS_80) ) \
|
|
{ \
|
|
/* |x|<<|y| */ \
|
|
(r)->ex = (y)->ex; \
|
|
(r)->ldhi = -((y)->ldhi); \
|
|
(r)->ldlo = -((y)->ldlo); \
|
|
} else { \
|
|
/* |y|<<|x| */ \
|
|
*(r) = *(x); \
|
|
}
|
|
#endif
|
|
|
|
/* Subtraction: r=x+y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Temporary variables: t1 */
|
|
/* Correct for any finite x and y */
|
|
#define __LIBM_SUBL_NORM_K80(r,x,y, t1) \
|
|
if ( ((x)->fphi.exponent-BIAS_80<-8000) || \
|
|
((x)->fphi.exponent-BIAS_80>+8000) || \
|
|
((y)->fphi.exponent-BIAS_80<-8000) || \
|
|
((y)->fphi.exponent-BIAS_80>+8000) ) \
|
|
{ \
|
|
__libm_normalizel_k80(x); \
|
|
__libm_normalizel_k80(y); \
|
|
} \
|
|
__LIBM_SUBL_K80(r,x,y, t1)
|
|
|
|
/* Multiplication: x*y */
|
|
/* The result is sum rhi+rlo */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no over/underflow (algorithm by T.J.Dekker) */
|
|
#define __LIBM_MULL1_K80(rhi,rlo,x,y, \
|
|
t32,t1,t2,t3,t4,t5,t6) \
|
|
t1=(x)*(t32); t3=x-t1; t3=t3+t1; t4=x-t3; \
|
|
t1=(y)*(t32); t5=y-t1; t5=t5+t1; t6=y-t5; \
|
|
t1=(t3)*(t5); \
|
|
t2=(t3)*(t6)+(t4)*(t5); \
|
|
rhi=t1+t2; \
|
|
rlo=t1-rhi; rlo=rlo+t2; rlo=rlo+(t4*t6);
|
|
|
|
/* Multiplication: (xhi+xlo)*(yhi+ylo) */
|
|
/* The result is sum rhi+rlo */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no over/underflow (algorithm by T.J.Dekker) */
|
|
#define __LIBM_MULL2_K80(rhi,rlo,xhi,xlo,yhi,ylo, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8) \
|
|
__LIBM_MULL1_K80(t7,t8,xhi,yhi, t32,t1,t2,t3,t4,t5,t6) \
|
|
t1=(xhi)*(ylo)+(xlo)*(yhi); t1=t1+t8; \
|
|
rhi=t7+t1; \
|
|
rlo=t7-rhi; rlo=rlo+t1;
|
|
|
|
/* Multiplication: r=x*y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8 */
|
|
/* Correct if x and y belong to interval [2^-8000;2^8000] */
|
|
#define __LIBM_MULL_K80(r,x,y, t32,t1,t2,t3,t4,t5,t6,t7,t8) \
|
|
(r)->ex = (x)->ex + (y)->ex; \
|
|
__LIBM_MULL2_K80((r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo,(y)->ldhi,(y)->ldlo, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8)
|
|
|
|
/* Multiplication: r=x*y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8 */
|
|
/* Correct for any finite x and y */
|
|
#define __LIBM_MULL_NORM_K80(r,x,y, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8) \
|
|
if ( ((x)->fphi.exponent-BIAS_80<-8000) || \
|
|
((x)->fphi.exponent-BIAS_80>+8000) || \
|
|
((y)->fphi.exponent-BIAS_80<-8000) || \
|
|
((y)->fphi.exponent-BIAS_80>+8000) ) \
|
|
{ \
|
|
__libm_normalizel_k80(x); \
|
|
__libm_normalizel_k80(y); \
|
|
} \
|
|
__LIBM_MULL_K80(r,x,y, t32,t1,t2,t3,t4,t5,t6,t7,t8)
|
|
|
|
/* Division: (xhi+xlo)/(yhi+ylo) */
|
|
/* The result is sum rhi+rlo */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8,t9 */
|
|
/* All variables are in long double precision */
|
|
/* Correct if no over/underflow (algorithm by T.J.Dekker) */
|
|
#define __LIBM_DIVL2_K80(rhi,rlo,xhi,xlo,yhi,ylo, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8,t9) \
|
|
t7=(xhi)/(yhi); \
|
|
__LIBM_MULL1_K80(t8,t9,t7,yhi, t32,t1,t2,t3,t4,t5,t6) \
|
|
t1=xhi-t8; t1=t1-t9; t1=t1+xlo; t1=t1-(t7)*(ylo); \
|
|
t1=(t1)/(yhi); \
|
|
rhi=t7+t1; \
|
|
rlo=t7-rhi; rlo=rlo+t1;
|
|
|
|
/* Division: r=x/y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8,t9 */
|
|
/* Correct if x and y belong to interval [2^-8000;2^8000] */
|
|
#define __LIBM_DIVL_K80(r,x,y, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8,t9) \
|
|
(r)->ex = (x)->ex - (y)->ex; \
|
|
__LIBM_DIVL2_K80( (r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo,(y)->ldhi,(y)->ldlo, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8,t9)
|
|
|
|
/* Division: r=x/y */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8 */
|
|
/* Correct for any finite x and y */
|
|
#define __LIBM_DIVL_NORM_K80(r,x,y, \
|
|
t32,t1,t2,t3,t4,t5,t6,t7,t8,t9) \
|
|
if ( ((x)->fphi.exponent-BIAS_80<-8000) || \
|
|
((x)->fphi.exponent-BIAS_80>+8000) || \
|
|
((y)->fphi.exponent-BIAS_80<-8000) || \
|
|
((y)->fphi.exponent-BIAS_80>+8000) ) \
|
|
{ \
|
|
__libm_normalizel_k80(x); \
|
|
__libm_normalizel_k80(y); \
|
|
} \
|
|
__LIBM_DIVL_K80(r,x,y, t32,t1,t2,t3,t4,t5,t6,t7,t8,t9)
|
|
|
|
/* Square root: sqrt(xhi+xlo) */
|
|
/* The result is sum rhi+rlo */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* half is the constant 0.5 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8,t9 */
|
|
/* All variables are in long double precision */
|
|
/* Correct for positive xhi+xlo (algorithm by T.J.Dekker) */
|
|
#define __LIBM_SQRTL2_NORM_K80(rhi,rlo,xhi,xlo, \
|
|
t32,half,t1,t2,t3,t4,t5,t6,t7,t8,t9) \
|
|
t7=sqrtl(xhi); \
|
|
__LIBM_MULL1_K80(t8,t9,t7,t7, t32,t1,t2,t3,t4,t5,t6) \
|
|
t1=xhi-t8; t1=t1-t9; t1=t1+xlo; t1=(t1)*(half); \
|
|
t1=(t1)/(t7); \
|
|
rhi=t7+t1; \
|
|
rlo=t7-rhi; rlo=rlo+t1;
|
|
|
|
/* Square root: r=sqrt(x) */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* half is the constant 0.5 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8,t9 */
|
|
/* Correct if x belongs to interval [2^-16000;2^16000] */
|
|
#define __LIBM_SQRTL_K80(r,x, \
|
|
t32,half,t1,t2,t3,t4,t5,t6,t7,t8,t9) \
|
|
if ( ((x)->ex & 1) == 1 ) { \
|
|
(x)->ex = (x)->ex + 1; \
|
|
(x)->ldhi *= half; \
|
|
(x)->ldlo *= half; \
|
|
} \
|
|
(r)->ex = (x)->ex >> 1; \
|
|
__LIBM_SQRTL2_NORM_K80( (r)->ldhi,(r)->ldlo, \
|
|
(x)->ldhi,(x)->ldlo, \
|
|
t32,half,t1,t2,t3,t4,t5,t6,t7,t8,t9)
|
|
|
|
/* Square root: r=sqrt(x) */
|
|
/* Variables r,x,y are pointers to struct ker80, */
|
|
/* all other variables are in long double precision */
|
|
/* Here t32 is the constant 2^32+1 */
|
|
/* half is the constant 0.5 */
|
|
/* Temporary variables: t1,t2,t3,t4,t5,t6,t7,t8,t9 */
|
|
/* Correct for any positive x */
|
|
#define __LIBM_SQRTL_NORM_K80(r,x, \
|
|
t32,half,t1,t2,t3,t4,t5,t6,t7,t8,t9) \
|
|
if ( ((x)->fphi.exponent-BIAS_80<-16000) || \
|
|
((x)->fphi.exponent-BIAS_80>+16000) ) \
|
|
{ \
|
|
__libm_normalizel_k80(x); \
|
|
} \
|
|
__LIBM_SQRTL_K80(r,x, t32,half,t1,t2,t3,t4,t5,t6,t7,t8,t9)
|
|
|
|
|
|
#ifdef __INTEL_COMPILER
|
|
#define ALIGN(n) __declspec(align(n))
|
|
#else /* __INTEL_COMPILER */
|
|
#define ALIGN(n)
|
|
#endif /* __INTEL_COMPILER */
|
|
|
|
/* macros to form a long double value in hex representation (unsigned short type) */
|
|
|
|
#if (defined(__unix__) && defined(__i386__))
|
|
# define LDOUBLE_ALIGN 12 /* IA32 Linux: 12-byte alignment */
|
|
#else /*__linux__ & IA32*/
|
|
# define LDOUBLE_ALIGN 16 /* EFI2/IA32 Win or IPF Win/Linux: 16-byte alignment */
|
|
#endif /*__linux__ & IA32*/
|
|
|
|
#if (LDOUBLE_ALIGN == 16)
|
|
#define _XPD_ ,0x0000,0x0000,0x0000
|
|
#else /*12*/
|
|
#define _XPD_ ,0x0000
|
|
#endif
|
|
|
|
#define LDOUBLE_HEX(w4,w3,w2,w1,w0) 0x##w0,0x##w1,0x##w2,0x##w3,0x##w4 _XPD_ /*LITTLE_ENDIAN*/
|
|
|
|
/* macros to sign-expand low 'num' bits of 'val' to native integer */
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGN_EXPAND(val,num) ((int)(val) << (32-(num))) >> (32-(num)) /* sign expand of 'num' LSBs */
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGN_EXPAND(val,num) ((int)(val) << (64-(num))) >> (64-(num)) /* sign expand of 'num' LSBs */
|
|
#endif
|
|
|
|
/* macros to form pointers to FP number on-the-fly */
|
|
|
|
#define FP32(f) ((struct fp32 *)&f)
|
|
#define FP64(d) ((struct fp64 *)&d)
|
|
#define FP80(ld) ((struct fp80 *)&ld)
|
|
|
|
/* macros to extract signed low and high doubleword of long double */
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define HI_DWORD_80(ld) ((((FP80(ld)->sign << 15) | FP80(ld)->exponent) << 16) | \
|
|
((FP80(ld)->hi_significand >> 16) & 0xFFFF))
|
|
# define LO_DWORD_80(ld) SIGN_EXPAND(FP80(ld)->lo_significand, 32)
|
|
#elif defined(SIZE_INT_64)
|
|
# define HI_DWORD_80(ld) ((((FP80(ld)->sign << 15) | FP80(ld)->exponent) << 16) | \
|
|
((FP80(ld)->significand >> 48) & 0xFFFF))
|
|
# define LO_DWORD_80(ld) SIGN_EXPAND(FP80(ld)->significand, 32)
|
|
#endif
|
|
|
|
/* macros to extract hi bits of significand.
|
|
* note that explicit high bit do not count (returns as is)
|
|
*/
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define HI_SIGNIFICAND_80(X,NBITS) ((X)->hi_significand >> (31 - (NBITS)))
|
|
#elif defined(SIZE_INT_64)
|
|
# define HI_SIGNIFICAND_80(X,NBITS) ((X)->significand >> (63 - (NBITS)))
|
|
#endif
|
|
|
|
/* macros to check, whether a significand bits are all zero, or some of them are non-zero.
|
|
* note that SIGNIFICAND_ZERO_80 tests high bit also, but SIGNIFICAND_NONZERO_80 does not
|
|
*/
|
|
|
|
#define SIGNIFICAND_ZERO_32(X) ((X)->significand == 0)
|
|
#define SIGNIFICAND_NONZERO_32(X) ((X)->significand != 0)
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGNIFICAND_ZERO_64(X) (((X)->hi_significand == 0) && ((X)->lo_significand == 0))
|
|
# define SIGNIFICAND_NONZERO_64(X) (((X)->hi_significand != 0) || ((X)->lo_significand != 0))
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGNIFICAND_ZERO_64(X) ((X)->significand == 0)
|
|
# define SIGNIFICAND_NONZERO_64(X) ((X)->significand != 0)
|
|
#endif
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGNIFICAND_ZERO_80(X) (((X)->hi_significand == 0x00000000) && ((X)->lo_significand == 0))
|
|
# define SIGNIFICAND_NONZERO_80(X) (((X)->hi_significand != 0x80000000) || ((X)->lo_significand != 0))
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGNIFICAND_ZERO_80(X) ((X)->significand == 0x0000000000000000)
|
|
# define SIGNIFICAND_NONZERO_80(X) ((X)->significand != 0x8000000000000000)
|
|
#endif
|
|
|
|
/* macros to compare long double with constant value, represented as hex */
|
|
|
|
#define SIGNIFICAND_EQ_HEX_32(X,BITS) ((X)->significand == 0x ## BITS)
|
|
#define SIGNIFICAND_GT_HEX_32(X,BITS) ((X)->significand > 0x ## BITS)
|
|
#define SIGNIFICAND_GE_HEX_32(X,BITS) ((X)->significand >= 0x ## BITS)
|
|
#define SIGNIFICAND_LT_HEX_32(X,BITS) ((X)->significand < 0x ## BITS)
|
|
#define SIGNIFICAND_LE_HEX_32(X,BITS) ((X)->significand <= 0x ## BITS)
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGNIFICAND_EQ_HEX_64(X,HI,LO) \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand == 0x ## LO))
|
|
# define SIGNIFICAND_GT_HEX_64(X,HI,LO) (((X)->hi_significand > 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand > 0x ## LO)))
|
|
# define SIGNIFICAND_GE_HEX_64(X,HI,LO) (((X)->hi_significand > 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand >= 0x ## LO)))
|
|
# define SIGNIFICAND_LT_HEX_64(X,HI,LO) (((X)->hi_significand < 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand < 0x ## LO)))
|
|
# define SIGNIFICAND_LE_HEX_64(X,HI,LO) (((X)->hi_significand < 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand <= 0x ## LO)))
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGNIFICAND_EQ_HEX_64(X,HI,LO) ((X)->significand == 0x ## HI ## LO)
|
|
# define SIGNIFICAND_GT_HEX_64(X,HI,LO) ((X)->significand > 0x ## HI ## LO)
|
|
# define SIGNIFICAND_GE_HEX_64(X,HI,LO) ((X)->significand >= 0x ## HI ## LO)
|
|
# define SIGNIFICAND_LT_HEX_64(X,HI,LO) ((X)->significand < 0x ## HI ## LO)
|
|
# define SIGNIFICAND_LE_HEX_64(X,HI,LO) ((X)->significand <= 0x ## HI ## LO)
|
|
#endif
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGNIFICAND_EQ_HEX_80(X,HI,LO) \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand == 0x ## LO))
|
|
# define SIGNIFICAND_GT_HEX_80(X,HI,LO) (((X)->hi_significand > 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand > 0x ## LO)))
|
|
# define SIGNIFICAND_GE_HEX_80(X,HI,LO) (((X)->hi_significand > 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand >= 0x ## LO)))
|
|
# define SIGNIFICAND_LT_HEX_80(X,HI,LO) (((X)->hi_significand < 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand < 0x ## LO)))
|
|
# define SIGNIFICAND_LE_HEX_80(X,HI,LO) (((X)->hi_significand < 0x ## HI) || \
|
|
(((X)->hi_significand == 0x ## HI) && ((X)->lo_significand <= 0x ## LO)))
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGNIFICAND_EQ_HEX_80(X,HI,LO) ((X)->significand == 0x ## HI ## LO)
|
|
# define SIGNIFICAND_GT_HEX_80(X,HI,LO) ((X)->significand > 0x ## HI ## LO)
|
|
# define SIGNIFICAND_GE_HEX_80(X,HI,LO) ((X)->significand >= 0x ## HI ## LO)
|
|
# define SIGNIFICAND_LT_HEX_80(X,HI,LO) ((X)->significand < 0x ## HI ## LO)
|
|
# define SIGNIFICAND_LE_HEX_80(X,HI,LO) ((X)->significand <= 0x ## HI ## LO)
|
|
#endif
|
|
|
|
#define VALUE_EQ_HEX_32(X,EXP,BITS) \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_EQ_HEX_32(X, BITS)))
|
|
#define VALUE_GT_HEX_32(X,EXP,BITS) (((X)->exponent > (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_GT_HEX_32(X, BITS))))
|
|
#define VALUE_GE_HEX_32(X,EXP,BITS) (((X)->exponent > (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_GE_HEX_32(X, BITS))))
|
|
#define VALUE_LT_HEX_32(X,EXP,BITS) (((X)->exponent < (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_LT_HEX_32(X, BITS))))
|
|
#define VALUE_LE_HEX_32(X,EXP,BITS) (((X)->exponent < (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_LE_HEX_32(X, BITS))))
|
|
|
|
#define VALUE_EQ_HEX_64(X,EXP,HI,LO) \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_EQ_HEX_64(X, HI, LO)))
|
|
#define VALUE_GT_HEX_64(X,EXP,HI,LO) (((X)->exponent > (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_GT_HEX_64(X, HI, LO))))
|
|
#define VALUE_GE_HEX_64(X,EXP,HI,LO) (((X)->exponent > (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_GE_HEX_64(X, HI, LO))))
|
|
#define VALUE_LT_HEX_64(X,EXP,HI,LO) (((X)->exponent < (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_LT_HEX_64(X, HI, LO))))
|
|
#define VALUE_LE_HEX_64(X,EXP,HI,LO) (((X)->exponent < (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_LE_HEX_64(X, HI, LO))))
|
|
|
|
#define VALUE_EQ_HEX_80(X,EXP,HI,LO) \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_EQ_HEX_80(X, HI, LO)))
|
|
#define VALUE_GT_HEX_80(X,EXP,HI,LO) (((X)->exponent > (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_GT_HEX_80(X, HI, LO))))
|
|
#define VALUE_GE_HEX_80(X,EXP,HI,LO) (((X)->exponent > (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_GE_HEX_80(X, HI, LO))))
|
|
#define VALUE_LT_HEX_80(X,EXP,HI,LO) (((X)->exponent < (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_LT_HEX_80(X, HI, LO))))
|
|
#define VALUE_LE_HEX_80(X,EXP,HI,LO) (((X)->exponent < (EXP)) || \
|
|
(((X)->exponent == (EXP)) && (SIGNIFICAND_LE_HEX_80(X, HI, LO))))
|
|
|
|
/* macros to compare two long doubles */
|
|
|
|
#define SIGNIFICAND_EQ_32(X,Y) ((X)->significand == (Y)->significand)
|
|
#define SIGNIFICAND_GT_32(X,Y) ((X)->significand > (Y)->significand)
|
|
#define SIGNIFICAND_GE_32(X,Y) ((X)->significand >= (Y)->significand)
|
|
#define SIGNIFICAND_LT_32(X,Y) ((X)->significand < (Y)->significand)
|
|
#define SIGNIFICAND_LE_32(X,Y) ((X)->significand <= (Y)->significand)
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGNIFICAND_EQ_64(X,Y) \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand == (Y)->lo_significand))
|
|
# define SIGNIFICAND_GT_64(X,Y) (((X)->hi_significand > (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand > (Y)->lo_significand)))
|
|
# define SIGNIFICAND_GE_64(X,Y) (((X)->hi_significand > (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand >= (Y)->lo_significand)))
|
|
# define SIGNIFICAND_LT_64(X,Y) (((X)->hi_significand < (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand < (Y)->lo_significand)))
|
|
# define SIGNIFICAND_LE_64(X,Y) (((X)->hi_significand < (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand <= (Y)->lo_significand)))
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGNIFICAND_EQ_64(X,Y) ((X)->significand == (Y)->significand)
|
|
# define SIGNIFICAND_GT_64(X,Y) ((X)->significand > (Y)->significand)
|
|
# define SIGNIFICAND_GE_64(X,Y) ((X)->significand >= (Y)->significand)
|
|
# define SIGNIFICAND_LT_64(X,Y) ((X)->significand < (Y)->significand)
|
|
# define SIGNIFICAND_LE_64(X,Y) ((X)->significand <= (Y)->significand)
|
|
#endif
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define SIGNIFICAND_EQ_80(X,Y) \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand == (Y)->lo_significand))
|
|
# define SIGNIFICAND_GT_80(X,Y) (((X)->hi_significand > (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand > (Y)->lo_significand)))
|
|
# define SIGNIFICAND_GE_80(X,Y) (((X)->hi_significand > (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand >= (Y)->lo_significand)))
|
|
# define SIGNIFICAND_LT_80(X,Y) (((X)->hi_significand < (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand < (Y)->lo_significand)))
|
|
# define SIGNIFICAND_LE_80(X,Y) (((X)->hi_significand < (Y)->hi_significand) || \
|
|
(((X)->hi_significand == (Y)->hi_significand) && ((X)->lo_significand <= (Y)->lo_significand)))
|
|
#elif defined(SIZE_INT_64)
|
|
# define SIGNIFICAND_EQ_80(X,Y) ((X)->significand == (Y)->significand)
|
|
# define SIGNIFICAND_GT_80(X,Y) ((X)->significand > (Y)->significand)
|
|
# define SIGNIFICAND_GE_80(X,Y) ((X)->significand >= (Y)->significand)
|
|
# define SIGNIFICAND_LT_80(X,Y) ((X)->significand < (Y)->significand)
|
|
# define SIGNIFICAND_LE_80(X,Y) ((X)->significand <= (Y)->significand)
|
|
#endif
|
|
|
|
#define VALUE_EQ_32(X,Y) \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_EQ_32(X, Y)))
|
|
#define VALUE_GT_32(X,Y) (((X)->exponent > (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_GT_32(X, Y))))
|
|
#define VALUE_GE_32(X,Y) (((X)->exponent > (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_GE_32(X, Y))))
|
|
#define VALUE_LT_32(X,Y) (((X)->exponent < (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_LT_32(X, Y))))
|
|
#define VALUE_LE_32(X,Y) (((X)->exponent < (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_LE_32(X, Y))))
|
|
|
|
#define VALUE_EQ_64(X,Y) \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_EQ_64(X, Y)))
|
|
#define VALUE_GT_64(X,Y) (((X)->exponent > (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_GT_64(X, Y))))
|
|
#define VALUE_GE_64(X,Y) (((X)->exponent > (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_GE_64(X, Y))))
|
|
#define VALUE_LT_64(X,Y) (((X)->exponent < (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_LT_64(X, Y))))
|
|
#define VALUE_LE_64(X,Y) (((X)->exponent < (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_LE_64(X, Y))))
|
|
|
|
#define VALUE_EQ_80(X,Y) \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_EQ_80(X, Y)))
|
|
#define VALUE_GT_80(X,Y) (((X)->exponent > (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_GT_80(X, Y))))
|
|
#define VALUE_GE_80(X,Y) (((X)->exponent > (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_GE_80(X, Y))))
|
|
#define VALUE_LT_80(X,Y) (((X)->exponent < (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_LT_80(X, Y))))
|
|
#define VALUE_LE_80(X,Y) (((X)->exponent < (Y)->exponent) || \
|
|
(((X)->exponent == (Y)->exponent) && (SIGNIFICAND_LE_80(X, Y))))
|
|
|
|
/* add/subtract 1 ulp macros */
|
|
|
|
#if defined(SIZE_INT_32)
|
|
# define ADD_ULP_80(X) \
|
|
if ((++(X)->lo_significand == 0) && \
|
|
(++(X)->hi_significand == (((X)->exponent == 0) ? 0x80000000 : 0))) \
|
|
{ \
|
|
(X)->hi_significand |= 0x80000000; \
|
|
++(X)->exponent; \
|
|
}
|
|
# define SUB_ULP_80(X) \
|
|
if (--(X)->lo_significand == 0xFFFFFFFF) { \
|
|
--(X)->hi_significand; \
|
|
if (((X)->exponent != 0) && \
|
|
((X)->hi_significand == 0x7FFFFFFF) && \
|
|
(--(X)->exponent != 0)) \
|
|
{ \
|
|
(X)->hi_significand |= 0x80000000; \
|
|
} \
|
|
}
|
|
#elif defined(SIZE_INT_64)
|
|
# define ADD_ULP_80(X) \
|
|
if (++(X)->significand == (((X)->exponent == 0) ? 0x8000000000000000 : 0))) { \
|
|
(X)->significand |= 0x8000000000000000; \
|
|
++(X)->exponent; \
|
|
}
|
|
# define SUB_ULP_80(X) \
|
|
{ \
|
|
--(X)->significand; \
|
|
if (((X)->exponent != 0) && \
|
|
((X)->significand == 0x7FFFFFFFFFFFFFFF) && \
|
|
(--(X)->exponent != 0)) \
|
|
{ \
|
|
(X)->significand |= 0x8000000000000000; \
|
|
} \
|
|
}
|
|
#endif
|
|
|
|
|
|
/* */
|
|
|
|
#define VOLATILE_32 /*volatile*/
|
|
#define VOLATILE_64 /*volatile*/
|
|
#define VOLATILE_80 /*volatile*/
|
|
|
|
#define QUAD_TYPE _Quad
|
|
|
|
#endif /*__LIBM_SUPPORT_H_INCLUDED__*/
|