glibc/sysdeps/ia64/fpu/s_nextafterf.S
Siddhesh Poyarekar 30891f35fa Remove "Contributed by" lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date.  Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.

Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions.  These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.

The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively.  These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:

https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2021-09-03 22:06:44 +05:30

504 lines
14 KiB
ArmAsm

.file "nextafterf.s"
// Copyright (c) 2000 - 2004, Intel Corporation
// All rights reserved.
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// * The name of Intel Corporation may not be used to endorse or promote
// products derived from this software without specific prior written
// permission.
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Intel Corporation is the author of this code, and requests that all
// problem reports or change requests be submitted to it directly at
// http://www.intel.com/software/products/opensource/libraries/num.htm.
//
// History
//==============================================================
// 02/02/00 Initial version
// 03/03/00 Modified to conform to C9X, and improve speed of main path
// 03/14/00 Fixed case where x is a power of 2, and x > y, improved speed
// 04/04/00 Unwind support added
// 05/12/00 Fixed erroneous denormal flag setting for exponent change cases 1,3
// 08/15/00 Bundle added after call to __libm_error_support to properly
// set [the previously overwritten] GR_Parameter_RESULT.
// 09/09/00 Updated fcmp so that qnans do not raise invalid
// 12/15/00 Corrected behavior when both args are zero to conform to C99, and
// fixed flag settings for several cases
// 05/20/02 Cleaned up namespace and sf0 syntax
// 02/10/03 Reordered header: .section, .global, .proc, .align
// 12/14/04 Added error handling on underflow.
//
// API
//==============================================================
// float nextafterf( float x, float y );
// input floating point f8, f9
// output floating point f8
//
// Registers used
//==============================================================
GR_max_pexp = r14
GR_min_pexp = r15
GR_exp = r16
GR_sig = r17
GR_lnorm_sig = r18
GR_sign_mask = r19
GR_exp_mask = r20
GR_sden_sig = r21
GR_new_sig = r22
GR_new_exp = r23
GR_lden_sig = r24
GR_snorm_sig = r25
GR_exp1 = r26
GR_x_exp = r27
GR_min_den_rexp = r28
// r36-39 parameters for libm_error_support
GR_SAVE_B0 = r34
GR_SAVE_GP = r35
GR_SAVE_PFS = r32
GR_Parameter_X = r36
GR_Parameter_Y = r37
GR_Parameter_RESULT = r38
GR_Parameter_TAG = r39
FR_lnorm_sig = f10
FR_lnorm_exp = f11
FR_lnorm = f12
FR_sden_sig = f13
FR_sden_exp = f14
FR_sden = f15
FR_save_f8 = f33
FR_new_exp = f34
FR_new_sig = f35
FR_lden_sig = f36
FR_snorm_sig = f37
FR_exp1 = f38
FR_tmp = f39
//
// Overview of operation
//==============================================================
// nextafterf determines the next representable value
// after x in the direction of y.
.section .text
GLOBAL_LIBM_ENTRY(nextafterf)
// Extract signexp from x
// Form smallest denormal significand = ulp size
{ .mlx
getf.exp GR_exp = f8
movl GR_sden_sig = 0x0000010000000000
}
// Form largest normal exponent
// Is x < y ? p10 if yes, p11 if no
// Form smallest normal exponent
{ .mfi
addl GR_max_pexp = 0x1007e, r0
fcmp.lt.s1 p10,p11 = f8, f9
addl GR_min_pexp = 0x0ff81, r0 ;;
}
// Is x=y?
{ .mfi
getf.sig GR_sig = f8
fcmp.eq.s0 p6,p0 = f8, f9
nop.i 0
}
// Extract significand from x
// Form largest normal significand
{ .mlx
nop.m 0
movl GR_lnorm_sig = 0xffffff0000000000 ;;
}
// Move largest normal significand to fp reg for special cases
{ .mfi
setf.sig FR_lnorm_sig = GR_lnorm_sig
nop.f 0
addl GR_sign_mask = 0x20000, r0 ;;
}
// Move smallest denormal significand and signexp to fp regs
// Is x=nan?
// Set p12 and p13 based on whether significand increases or decreases
// It increases (p12 set) if x<y and x>=0 or if x>y and x<0
// It decreases (p13 set) if x<y and x<0 or if x>y and x>=0
{ .mfi
setf.sig FR_sden_sig = GR_sden_sig
fclass.m p8,p0 = f8, 0xc3
(p10) cmp.lt p12,p13 = GR_exp, GR_sign_mask
}
{ .mfi
setf.exp FR_sden_exp = GR_min_pexp
nop.f 999
(p11) cmp.ge p12,p13 = GR_exp, GR_sign_mask ;;
}
.pred.rel "mutex",p12,p13
// Form expected new significand, adding or subtracting 1 ulp increment
// If x=y set result to y
// Form smallest normal significand and largest denormal significand
{ .mfi
(p12) add GR_new_sig = GR_sig, GR_sden_sig
(p6) fmerge.s f8=f9,f9
dep.z GR_snorm_sig = 1,63,1 // 0x8000000000000000
}
{ .mlx
(p13) sub GR_new_sig = GR_sig, GR_sden_sig
movl GR_lden_sig = 0x7fffff0000000000 ;;
}
// Move expected result significand and signexp to fp regs
// Is y=nan?
// Form new exponent in case result exponent needs incrementing or decrementing
{ .mfi
setf.exp FR_new_exp = GR_exp
fclass.m p9,p0 = f9, 0xc3
(p12) add GR_exp1 = 1, GR_exp
}
{ .mib
setf.sig FR_new_sig = GR_new_sig
(p13) add GR_exp1 = -1, GR_exp
(p6) br.ret.spnt b0 ;; // Exit if x=y
}
// Move largest normal signexp to fp reg for special cases
// Is x=zero?
{ .mfi
setf.exp FR_lnorm_exp = GR_max_pexp
fclass.m p7,p0 = f8, 0x7
nop.i 999
}
{ .mfb
nop.m 999
(p8) fma.s0 f8 = f8,f1,f9
(p8) br.ret.spnt b0 ;; // Exit if x=nan
}
// Move exp+-1 and smallest normal significand to fp regs for special cases
// Is x=inf?
{ .mfi
setf.exp FR_exp1 = GR_exp1
fclass.m p6,p0 = f8, 0x23
addl GR_exp_mask = 0x1ffff, r0
}
{ .mfb
setf.sig FR_snorm_sig = GR_snorm_sig
(p9) fma.s0 f8 = f8,f1,f9
(p9) br.ret.spnt b0 ;; // Exit if y=nan
}
// Move largest denormal significand to fp regs for special cases
// Save x
{ .mfb
setf.sig FR_lden_sig = GR_lden_sig
mov FR_save_f8 = f8
(p7) br.cond.spnt NEXT_ZERO ;; // Exit if x=0
}
// Mask off the sign to get x_exp
{ .mfb
and GR_x_exp = GR_exp_mask, GR_exp
nop.f 999
(p6) br.cond.spnt NEXT_INF ;; // Exit if x=inf
}
// Check 6 special cases when significand rolls over:
// 1 sig size incr, x_sig=max_sig, x_exp < max_exp
// Set p6, result is sig=min_sig, exp++
// 2 sig size incr, x_sig=max_sig, x_exp >= max_exp
// Set p7, result is inf, signal overflow
// 3 sig size decr, x_sig=min_sig, x_exp > min_exp
// Set p8, result is sig=max_sig, exp--
// 4 sig size decr, x_sig=min_sig, x_exp = min_exp
// Set p9, result is sig=max_den_sig, exp same, signal underflow and inexact
// 5 sig size decr, x_sig=min_den_sig, x_exp = min_exp
// Set p10, result is zero, sign of x, signal underflow and inexact
// 6 sig size decr, x_sig=min_sig, x_exp < min_exp
// Set p14, result is zero, sign of x, signal underflow and inexact
//
// Form exponent of smallest float denormal (if normalized register format)
{ .mmi
adds GR_min_den_rexp = -23, GR_min_pexp
(p12) cmp.eq.unc p6,p0 = GR_new_sig, r0
(p13) cmp.eq.unc p8,p10 = GR_new_sig, GR_lden_sig ;;
}
{ .mmi
(p6) cmp.lt.unc p6,p7 = GR_x_exp, GR_max_pexp
(p8) cmp.gt.unc p8,p9 = GR_x_exp, GR_min_pexp
(p10) cmp.eq.unc p10,p0 = GR_new_sig, r0 ;;
}
// Create small normal in case need to generate underflow flag
{ .mfi
(p10) cmp.le.unc p10,p0 = GR_x_exp, GR_min_pexp
fmerge.se FR_tmp = FR_sden_exp, FR_lnorm_sig
(p9) cmp.gt.unc p9,p14 = GR_x_exp, GR_min_den_rexp
}
// Branch if cases 1, 2, 3
{ .bbb
(p6) br.cond.spnt NEXT_EXPUP
(p7) br.cond.spnt NEXT_OVERFLOW
(p8) br.cond.spnt NEXT_EXPDOWN ;;
}
// Branch if cases 4, 5, 6
{ .bbb
(p9) br.cond.spnt NEXT_NORM_TO_DENORM
(p10) br.cond.spnt NEXT_UNDERFLOW_TO_ZERO
(p14) br.cond.spnt NEXT_UNDERFLOW_TO_ZERO ;;
}
// Here if no special cases
// Set p6 if result will be a denormal, so can force underflow flag
// Case 1: x_exp=min_exp, x_sig=unnormalized
// Case 2: x_exp<min_exp
{ .mfi
cmp.lt p6,p7 = GR_x_exp, GR_min_pexp
fmerge.se f8 = FR_new_exp, FR_new_sig
nop.i 999 ;;
}
{ .mfi
nop.m 999
nop.f 999
(p7) tbit.z p6,p0 = GR_new_sig, 63 ;;
}
NEXT_COMMON_FINISH:
// Force underflow and inexact if denormal result
{ .mfi
nop.m 999
(p6) fma.s.s0 FR_tmp = FR_tmp,FR_tmp,f0
nop.i 999
}
{ .mfb
nop.m 999
fnorm.s.s0 f8 = f8 // Final normalization to result precision
(p6) br.cond.spnt NEXT_UNDERFLOW ;;
}
{ .mfb
nop.m 999
nop.f 999
br.ret.sptk b0;;
}
//Special cases
NEXT_EXPUP:
{ .mfb
cmp.lt p6,p7 = GR_x_exp, GR_min_pexp
fmerge.se f8 = FR_exp1, FR_snorm_sig
br.cond.sptk NEXT_COMMON_FINISH ;;
}
NEXT_EXPDOWN:
{ .mfb
cmp.lt p6,p7 = GR_x_exp, GR_min_pexp
fmerge.se f8 = FR_exp1, FR_lnorm_sig
br.cond.sptk NEXT_COMMON_FINISH ;;
}
NEXT_NORM_TO_DENORM:
{ .mfi
nop.m 999
fmerge.se f8 = FR_new_exp, FR_lden_sig
nop.i 999
}
// Force underflow and inexact
{ .mfb
nop.m 999
fma.s.s0 FR_tmp = FR_tmp,FR_tmp,f0
br.cond.sptk NEXT_UNDERFLOW ;;
}
NEXT_UNDERFLOW_TO_ZERO:
{ .mfb
cmp.eq p6,p0 = r0,r0
fmerge.s f8 = FR_save_f8,f0
br.cond.sptk NEXT_COMMON_FINISH ;;
}
NEXT_INF:
// Here if f8 is +- infinity
// INF
// if f8 is +inf, no matter what y is return largest float
// if f8 is -inf, no matter what y is return -largest float
{ .mfi
nop.m 999
fmerge.se FR_lnorm = FR_lnorm_exp,FR_lnorm_sig
nop.i 999 ;;
}
{ .mfb
nop.m 999
fmerge.s f8 = f8,FR_lnorm
br.ret.sptk b0 ;;
}
NEXT_ZERO:
// Here if f8 is +- zero
// ZERO
// if f8 is zero and y is +, return + smallest float denormal
// if f8 is zero and y is -, return - smallest float denormal
{ .mfi
nop.m 999
fmerge.se FR_sden = FR_sden_exp,FR_sden_sig
nop.i 999 ;;
}
// Create small normal to generate underflow flag
{ .mfi
nop.m 999
fmerge.se FR_tmp = FR_sden_exp, FR_lnorm_sig
nop.i 999 ;;
}
// Add correct sign from direction arg
{ .mfi
nop.m 999
fmerge.s f8 = f9,FR_sden
nop.i 999 ;;
}
// Force underflow and inexact flags
{ .mfb
nop.m 999
fma.s.s0 FR_tmp = FR_tmp,FR_tmp,f0
br.cond.sptk NEXT_UNDERFLOW ;;
}
NEXT_UNDERFLOW:
// Here if result is a denorm, or input is finite and result is zero
// Call error support to report possible range error
{ .mib
alloc r32=ar.pfs,2,2,4,0
mov GR_Parameter_TAG = 269 // Error code
br.cond.sptk __libm_error_region // Branch to error call
}
;;
NEXT_OVERFLOW:
// Here if input is finite, but result will be infinite
// Use frcpa to generate infinity of correct sign
// Call error support to report possible range error
{ .mfi
alloc r32=ar.pfs,2,2,4,0
frcpa.s1 f8,p6 = FR_save_f8, f0
nop.i 999 ;;
}
// Create largest double
{ .mfi
nop.m 999
fmerge.se FR_lnorm = FR_lnorm_exp,FR_lnorm_sig
nop.i 999 ;;
}
// Force overflow and inexact flags to be set
{ .mfb
mov GR_Parameter_TAG = 155 // Error code
fma.s.s0 FR_tmp = FR_lnorm,FR_lnorm,f0
br.cond.sptk __libm_error_region // Branch to error call
}
;;
GLOBAL_LIBM_END(nextafterf)
libm_alias_float_other (nextafter, nextafter)
LOCAL_LIBM_ENTRY(__libm_error_region)
.prologue
// (1)
{ .mfi
add GR_Parameter_Y=-32,sp // Parameter 2 value
nop.f 0
.save ar.pfs,GR_SAVE_PFS
mov GR_SAVE_PFS=ar.pfs // Save ar.pfs
}
{ .mfi
.fframe 64
add sp=-64,sp // Create new stack
nop.f 0
mov GR_SAVE_GP=gp // Save gp
};;
// (2)
{ .mmi
stfs [GR_Parameter_Y] = f9,16 // STORE Parameter 2 on stack
add GR_Parameter_X = 16,sp // Parameter 1 address
.save b0, GR_SAVE_B0
mov GR_SAVE_B0=b0 // Save b0
};;
.body
// (3)
{ .mib
stfs [GR_Parameter_X] = FR_save_f8 // STORE Parameter 1 on stack
add GR_Parameter_RESULT = 0,GR_Parameter_Y // Parameter 3 address
nop.b 0
}
{ .mib
stfs [GR_Parameter_Y] = f8 // STORE Parameter 3 on stack
add GR_Parameter_Y = -16,GR_Parameter_Y
br.call.sptk b0=__libm_error_support# // Call error handling function
};;
{ .mmi
nop.m 0
nop.m 0
add GR_Parameter_RESULT = 48,sp
};;
// (4)
{ .mmi
ldfs f8 = [GR_Parameter_RESULT] // Get return result off stack
.restore sp
add sp = 64,sp // Restore stack pointer
mov b0 = GR_SAVE_B0 // Restore return address
};;
{ .mib
mov gp = GR_SAVE_GP // Restore gp
mov ar.pfs = GR_SAVE_PFS // Restore ar.pfs
br.ret.sptk b0 // Return
};;
LOCAL_LIBM_END(__libm_error_region)
.type __libm_error_support#,@function
.global __libm_error_support#