glibc/manual/sysinfo.texi
Florian Weimer 076f09afba Linux: Remove <sys/sysctl.h> and the sysctl function
Linux 5.5 remove the system call in commit
61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>").  Therefore, the compat function is just a stub that
sets ENOSYS.

Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.

x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it.  Otherwise, a new compat symbol would be added.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2020-04-15 17:17:32 +02:00

1109 lines
44 KiB
Plaintext

@node System Management, System Configuration, Users and Groups, Top
@c %MENU% Controlling the system and getting information about it
@chapter System Management
This chapter describes facilities for controlling the system that
underlies a process (including the operating system and hardware) and
for getting information about it. Anyone can generally use the
informational facilities, but usually only a properly privileged process
can make changes.
@menu
* Host Identification:: Determining the name of the machine.
* Platform Type:: Determining operating system and basic
machine type
* Filesystem Handling:: Controlling/querying mounts
@end menu
To get information on parameters of the system that are built into the
system, such as the maximum length of a filename, @ref{System
Configuration}.
@node Host Identification
@section Host Identification
This section explains how to identify the particular system on which your
program is running. First, let's review the various ways computer systems
are named, which is a little complicated because of the history of the
development of the Internet.
Every Unix system (also known as a host) has a host name, whether it's
connected to a network or not. In its simplest form, as used before
computer networks were an issue, it's just a word like @samp{chicken}.
@cindex host name
But any system attached to the Internet or any network like it conforms
to a more rigorous naming convention as part of the Domain Name System
(DNS). In the DNS, every host name is composed of two parts:
@cindex DNS
@cindex Domain Name System
@enumerate
@item
hostname
@cindex hostname
@item
domain name
@cindex domain name
@end enumerate
You will note that ``hostname'' looks a lot like ``host name'', but is
not the same thing, and that people often incorrectly refer to entire
host names as ``domain names.''
In the DNS, the full host name is properly called the FQDN (Fully Qualified
Domain Name) and consists of the hostname, then a period, then the
domain name. The domain name itself usually has multiple components
separated by periods. So for example, a system's hostname may be
@samp{chicken} and its domain name might be @samp{ai.mit.edu}, so
its FQDN (which is its host name) is @samp{chicken.ai.mit.edu}.
@cindex FQDN
Adding to the confusion, though, is that the DNS is not the only name space
in which a computer needs to be known. Another name space is the
NIS (aka YP) name space. For NIS purposes, there is another domain
name, which is called the NIS domain name or the YP domain name. It
need not have anything to do with the DNS domain name.
@cindex YP
@cindex NIS
@cindex NIS domain name
@cindex YP domain name
Confusing things even more is the fact that in the DNS, it is possible for
multiple FQDNs to refer to the same system. However, there is always
exactly one of them that is the true host name, and it is called the
canonical FQDN.
In some contexts, the host name is called a ``node name.''
For more information on DNS host naming, see @ref{Host Names}.
@pindex hostname
@pindex hostid
@pindex unistd.h
Prototypes for these functions appear in @file{unistd.h}.
The programs @code{hostname}, @code{hostid}, and @code{domainname} work
by calling these functions.
@deftypefun int gethostname (char *@var{name}, size_t @var{size})
@standards{BSD, unistd.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall on unix; implemented in terms of uname on posix and of
@c hurd_get_host_config on hurd.
This function returns the host name of the system on which it is called,
in the array @var{name}. The @var{size} argument specifies the size of
this array, in bytes. Note that this is @emph{not} the DNS hostname.
If the system participates in the DNS, this is the FQDN (see above).
The return value is @code{0} on success and @code{-1} on failure. In
@theglibc{}, @code{gethostname} fails if @var{size} is not large
enough; then you can try again with a larger array. The following
@code{errno} error condition is defined for this function:
@table @code
@item ENAMETOOLONG
The @var{size} argument is less than the size of the host name plus one.
@end table
@pindex sys/param.h
On some systems, there is a symbol for the maximum possible host name
length: @code{MAXHOSTNAMELEN}. It is defined in @file{sys/param.h}.
But you can't count on this to exist, so it is cleaner to handle
failure and try again.
@code{gethostname} stores the beginning of the host name in @var{name}
even if the host name won't entirely fit. For some purposes, a
truncated host name is good enough. If it is, you can ignore the
error code.
@end deftypefun
@deftypefun int sethostname (const char *@var{name}, size_t @var{length})
@standards{BSD, unistd.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall on unix; implemented in terms of hurd_set_host_config
@c on hurd.
The @code{sethostname} function sets the host name of the system that
calls it to @var{name}, a string with length @var{length}. Only
privileged processes are permitted to do this.
Usually @code{sethostname} gets called just once, at system boot time.
Often, the program that calls it sets it to the value it finds in the
file @code{/etc/hostname}.
@cindex /etc/hostname
Be sure to set the host name to the full host name, not just the DNS
hostname (see above).
The return value is @code{0} on success and @code{-1} on failure.
The following @code{errno} error condition is defined for this function:
@table @code
@item EPERM
This process cannot set the host name because it is not privileged.
@end table
@end deftypefun
@deftypefun int getdomainnname (char *@var{name}, size_t @var{length})
@standards{???, unistd.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Syscalls uname, then strlen and memcpy.
@cindex NIS domain name
@cindex YP domain name
@code{getdomainname} returns the NIS (aka YP) domain name of the system
on which it is called. Note that this is not the more popular DNS
domain name. Get that with @code{gethostname}.
The specifics of this function are analogous to @code{gethostname}, above.
@end deftypefun
@deftypefun int setdomainname (const char *@var{name}, size_t @var{length})
@standards{???, unistd.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall.
@cindex NIS domain name
@cindex YP domain name
@code{setdomainname} sets the NIS (aka YP) domain name of the system
on which it is called. Note that this is not the more popular DNS
domain name. Set that with @code{sethostname}.
The specifics of this function are analogous to @code{sethostname}, above.
@end deftypefun
@deftypefun {long int} gethostid (void)
@standards{BSD, unistd.h}
@safety{@prelim{}@mtsafe{@mtshostid{} @mtsenv{} @mtslocale{}}@asunsafe{@ascudlopen{} @ascuplugin{} @asucorrupt{} @ascuheap{} @asulock{}}@acunsafe{@aculock{} @acucorrupt{} @acsmem{} @acsfd{}}}
@c On HURD, calls _hurd_get_host_config and strtol. On Linux, open
@c HOSTIDFILE, reads an int32_t and closes; if that fails, it calls
@c gethostname and gethostbyname_r to use the h_addr.
This function returns the ``host ID'' of the machine the program is
running on. By convention, this is usually the primary Internet IP address
of that machine, converted to a @w{@code{long int}}. However, on some
systems it is a meaningless but unique number which is hard-coded for
each machine.
This is not widely used. It arose in BSD 4.2, but was dropped in BSD 4.4.
It is not required by POSIX.
The proper way to query the IP address is to use @code{gethostbyname}
on the results of @code{gethostname}. For more information on IP addresses,
@xref{Host Addresses}.
@end deftypefun
@deftypefun int sethostid (long int @var{id})
@standards{BSD, unistd.h}
@safety{@prelim{}@mtunsafe{@mtasuconst{:@mtshostid{}}}@asunsafe{}@acunsafe{@acucorrupt{} @acsfd{}}}
The @code{sethostid} function sets the ``host ID'' of the host machine
to @var{id}. Only privileged processes are permitted to do this. Usually
it happens just once, at system boot time.
The proper way to establish the primary IP address of a system
is to configure the IP address resolver to associate that IP address with
the system's host name as returned by @code{gethostname}. For example,
put a record for the system in @file{/etc/hosts}.
See @code{gethostid} above for more information on host ids.
The return value is @code{0} on success and @code{-1} on failure.
The following @code{errno} error conditions are defined for this function:
@table @code
@item EPERM
This process cannot set the host name because it is not privileged.
@item ENOSYS
The operating system does not support setting the host ID. On some
systems, the host ID is a meaningless but unique number hard-coded for
each machine.
@end table
@end deftypefun
@node Platform Type
@section Platform Type Identification
You can use the @code{uname} function to find out some information about
the type of computer your program is running on. This function and the
associated data type are declared in the header file
@file{sys/utsname.h}.
@pindex sys/utsname.h
As a bonus, @code{uname} also gives some information identifying the
particular system your program is running on. This is the same information
which you can get with functions targeted to this purpose described in
@ref{Host Identification}.
@deftp {Data Type} {struct utsname}
@standards{POSIX.1, sys/utsname.h}
The @code{utsname} structure is used to hold information returned
by the @code{uname} function. It has the following members:
@table @code
@item char sysname[]
This is the name of the operating system in use.
@item char release[]
This is the current release level of the operating system implementation.
@item char version[]
This is the current version level within the release of the operating
system.
@item char machine[]
This is a description of the type of hardware that is in use.
Some systems provide a mechanism to interrogate the kernel directly for
this information. On systems without such a mechanism, @theglibc{}
fills in this field based on the configuration name that was
specified when building and installing the library.
GNU uses a three-part name to describe a system configuration; the three
parts are @var{cpu}, @var{manufacturer} and @var{system-type}, and they
are separated with dashes. Any possible combination of three names is
potentially meaningful, but most such combinations are meaningless in
practice and even the meaningful ones are not necessarily supported by
any particular GNU program.
Since the value in @code{machine} is supposed to describe just the
hardware, it consists of the first two parts of the configuration name:
@samp{@var{cpu}-@var{manufacturer}}. For example, it might be one of these:
@quotation
@code{"sparc-sun"},
@code{"i386-@var{anything}"},
@code{"m68k-hp"},
@code{"m68k-sony"},
@code{"m68k-sun"},
@code{"mips-dec"}
@end quotation
@item char nodename[]
This is the host name of this particular computer. In @theglibc{},
the value is the same as that returned by @code{gethostname};
see @ref{Host Identification}.
@code{gethostname} is implemented with a call to @code{uname}.
@item char domainname[]
This is the NIS or YP domain name. It is the same value returned by
@code{getdomainname}; see @ref{Host Identification}. This element
is a relatively recent invention and use of it is not as portable as
use of the rest of the structure.
@c getdomainname() is implemented with a call to uname().
@end table
@end deftp
@deftypefun int uname (struct utsname *@var{info})
@standards{POSIX.1, sys/utsname.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall on unix; the posix fallback is to call gethostname and
@c then fills in the other fields with constants; on HURD, it calls
@c proc_uname and then gethostname.
The @code{uname} function fills in the structure pointed to by
@var{info} with information about the operating system and host machine.
A non-negative return value indicates that the data was successfully stored.
@code{-1} as the return value indicates an error. The only error possible is
@code{EFAULT}, which we normally don't mention as it is always a
possibility.
@end deftypefun
@node Filesystem Handling
@section Controlling and Querying Mounts
All files are in filesystems, and before you can access any file, its
filesystem must be mounted. Because of Unix's concept of
@emph{Everything is a file}, mounting of filesystems is central to doing
almost anything. This section explains how to find out what filesystems
are currently mounted and what filesystems are available for mounting,
and how to change what is mounted.
The classic filesystem is the contents of a disk drive. The concept is
considerably more abstract, though, and lots of things other than disk
drives can be mounted.
Some block devices don't correspond to traditional devices like disk
drives. For example, a loop device is a block device whose driver uses
a regular file in another filesystem as its medium. So if that regular
file contains appropriate data for a filesystem, you can by mounting the
loop device essentially mount a regular file.
Some filesystems aren't based on a device of any kind. The ``proc''
filesystem, for example, contains files whose data is made up by the
filesystem driver on the fly whenever you ask for it. And when you
write to it, the data you write causes changes in the system. No data
gets stored.
@c It would be good to mention NFS mounts here.
@menu
* Mount Information:: What is or could be mounted?
* Mount-Unmount-Remount:: Controlling what is mounted and how
@end menu
@node Mount Information, Mount-Unmount-Remount, , Filesystem Handling
@subsection Mount Information
For some programs it is desirable and necessary to access information
about whether a certain filesystem is mounted and, if it is, where, or
simply to get lists of all the available filesystems. @Theglibc{}
provides some functions to retrieve this information portably.
Traditionally Unix systems have a file named @file{/etc/fstab} which
describes all possibly mounted filesystems. The @code{mount} program
uses this file to mount at startup time of the system all the
necessary filesystems. The information about all the filesystems
actually mounted is normally kept in a file named either
@file{/var/run/mtab} or @file{/etc/mtab}. Both files share the same
syntax and it is crucial that this syntax is followed all the time.
Therefore it is best to never directly write to the files. The functions
described in this section can do this and they also provide the
functionality to convert the external textual representation to the
internal representation.
Note that the @file{fstab} and @file{mtab} files are maintained on a
system by @emph{convention}. It is possible for the files not to exist
or not to be consistent with what is really mounted or available to
mount, if the system's administration policy allows it. But programs
that mount and unmount filesystems typically maintain and use these
files as described herein.
@vindex _PATH_FSTAB
@vindex _PATH_MNTTAB
@vindex _PATH_MOUNTED
@vindex FSTAB
@vindex MNTTAB
@vindex MOUNTED
The filenames given above should never be used directly. The portable
way to handle these files is to use the macros @code{_PATH_FSTAB},
defined in @file{fstab.h}, or @code{_PATH_MNTTAB}, defined in
@file{mntent.h} and @file{paths.h}, for @file{fstab}; and the macro
@code{_PATH_MOUNTED}, also defined in @file{mntent.h} and
@file{paths.h}, for @file{mtab}. There are also two alternate macro
names @code{FSTAB}, @code{MNTTAB}, and @code{MOUNTED} defined but
these names are deprecated and kept only for backward compatibility.
The names @code{_PATH_MNTTAB} and @code{_PATH_MOUNTED} should always be used.
@menu
* fstab:: The @file{fstab} file
* mtab:: The @file{mtab} file
* Other Mount Information:: Other (non-libc) sources of mount information
@end menu
@node fstab
@subsubsection The @file{fstab} file
The internal representation for entries of the file is @w{@code{struct
fstab}}, defined in @file{fstab.h}.
@deftp {Data Type} {struct fstab}
@standards{BSD, fstab.h}
This structure is used with the @code{getfsent}, @code{getfsspec}, and
@code{getfsfile} functions.
@table @code
@item char *fs_spec
This element describes the device from which the filesystem is mounted.
Normally this is the name of a special device, such as a hard disk
partition, but it could also be a more or less generic string. For
@dfn{NFS} it would be a hostname and directory name combination.
Even though the element is not declared @code{const} it shouldn't be
modified. The missing @code{const} has historic reasons, since this
function predates @w{ISO C}. The same is true for the other string
elements of this structure.
@item char *fs_file
This describes the mount point on the local system. I.e., accessing any
file in this filesystem has implicitly or explicitly this string as a
prefix.
@item char *fs_vfstype
This is the type of the filesystem. Depending on what the underlying
kernel understands it can be any string.
@item char *fs_mntops
This is a string containing options passed to the kernel with the
@code{mount} call. Again, this can be almost anything. There can be
more than one option, separated from the others by a comma. Each option
consists of a name and an optional value part, introduced by an @code{=}
character.
If the value of this element must be processed it should ideally be done
using the @code{getsubopt} function; see @ref{Suboptions}.
@item const char *fs_type
This name is poorly chosen. This element points to a string (possibly
in the @code{fs_mntops} string) which describes the modes with which the
filesystem is mounted. @file{fstab} defines five macros to describe the
possible values:
@vtable @code
@item FSTAB_RW
The filesystem gets mounted with read and write enabled.
@item FSTAB_RQ
The filesystem gets mounted with read and write enabled. Write access
is restricted by quotas.
@item FSTAB_RO
The filesystem gets mounted read-only.
@item FSTAB_SW
This is not a real filesystem, it is a swap device.
@item FSTAB_XX
This entry from the @file{fstab} file is totally ignored.
@end vtable
Testing for equality with these values must happen using @code{strcmp}
since these are all strings. Comparing the pointer will probably always
fail.
@item int fs_freq
This element describes the dump frequency in days.
@item int fs_passno
This element describes the pass number on parallel dumps. It is closely
related to the @code{dump} utility used on Unix systems.
@end table
@end deftp
To read the entire content of the of the @file{fstab} file @theglibc{}
contains a set of three functions which are designed in the usual way.
@deftypefun int setfsent (void)
@standards{BSD, fstab.h}
@safety{@prelim{}@mtunsafe{@mtasurace{:fsent}}@asunsafe{@ascuheap{} @asucorrupt{} @asulock{}}@acunsafe{@acucorrupt{} @aculock{} @acsmem{} @acsfd{}}}
@c setfsent @mtasurace:fsent @ascuheap @asucorrupt @asulock @acucorrupt @aculock @acsmem @acsfd
@c fstab_init(1) @mtasurace:fsent @ascuheap @asucorrupt @asulock @acucorrupt @aculock @acsmem @acsfd
@c malloc dup @ascuheap @acsmem
@c rewind dup @asucorrupt @acucorrupt [no @aculock]
@c setmntent dup @ascuheap @asulock @acsmem @acsfd @aculock
This function makes sure that the internal read pointer for the
@file{fstab} file is at the beginning of the file. This is done by
either opening the file or resetting the read pointer.
Since the file handle is internal to the libc this function is not
thread-safe.
This function returns a non-zero value if the operation was successful
and the @code{getfs*} functions can be used to read the entries of the
file.
@end deftypefun
@deftypefun void endfsent (void)
@standards{BSD, fstab.h}
@safety{@prelim{}@mtunsafe{@mtasurace{:fsent}}@asunsafe{@ascuheap{} @asucorrupt{} @asulock{}}@acunsafe{@acucorrupt{} @aculock{} @acsmem{} @acsfd{}}}
@c endfsent @mtasurace:fsent @ascuheap @asucorrupt @asulock @acucorrupt @aculock @acsmem @acsfd
@c endmntent dup @ascuheap @asulock @aculock @acsmem @acsfd
This function makes sure that all resources acquired by a prior call to
@code{setfsent} (explicitly or implicitly by calling @code{getfsent}) are
freed.
@end deftypefun
@deftypefun {struct fstab *} getfsent (void)
@standards{BSD, fstab.h}
@safety{@prelim{}@mtunsafe{@mtasurace{:fsent} @mtslocale{}}@asunsafe{@asucorrupt{} @ascuheap{} @asulock{}}@acunsafe{@acucorrupt{} @aculock{} @acsmem{}}}
@c getfsent @mtasurace:fsent @mtslocale @asucorrupt @ascuheap @asulock @acucorrupt @aculock @acsmem
@c fstab_init(0) dup @mtasurace:fsent @ascuheap @asucorrupt @asulock @acucorrupt @aculock @acsmem @acsfd
@c fstab_fetch @mtasurace:fsent @mtslocale @asucorrupt @ascuheap @acucorrupt @aculock @acsmem
@c getmntent_r dup @mtslocale @asucorrupt @ascuheap @acucorrupt @aculock @acsmem
@c fstab_convert @mtasurace:fsent
@c hasmntopt dup ok
This function returns the next entry of the @file{fstab} file. If this
is the first call to any of the functions handling @file{fstab} since
program start or the last call of @code{endfsent}, the file will be
opened.
The function returns a pointer to a variable of type @code{struct
fstab}. This variable is shared by all threads and therefore this
function is not thread-safe. If an error occurred @code{getfsent}
returns a @code{NULL} pointer.
@end deftypefun
@deftypefun {struct fstab *} getfsspec (const char *@var{name})
@standards{BSD, fstab.h}
@safety{@prelim{}@mtunsafe{@mtasurace{:fsent} @mtslocale{}}@asunsafe{@asucorrupt{} @ascuheap{} @asulock{}}@acunsafe{@acucorrupt{} @aculock{} @acsmem{}}}
@c getffsspec @mtasurace:fsent @mtslocale @asucorrupt @ascuheap @asulock @acucorrupt @aculock @acsmem
@c fstab_init(1) dup @mtasurace:fsent @ascuheap @asucorrupt @asulock @acucorrupt @aculock @acsmem @acsfd
@c fstab_fetch dup @mtasurace:fsent @mtslocale @asucorrupt @ascuheap @acucorrupt @aculock @acsmem
@c strcmp dup ok
@c fstab_convert dup @mtasurace:fsent
This function returns the next entry of the @file{fstab} file which has
a string equal to @var{name} pointed to by the @code{fs_spec} element.
Since there is normally exactly one entry for each special device it
makes no sense to call this function more than once for the same
argument. If this is the first call to any of the functions handling
@file{fstab} since program start or the last call of @code{endfsent},
the file will be opened.
The function returns a pointer to a variable of type @code{struct
fstab}. This variable is shared by all threads and therefore this
function is not thread-safe. If an error occurred @code{getfsent}
returns a @code{NULL} pointer.
@end deftypefun
@deftypefun {struct fstab *} getfsfile (const char *@var{name})
@standards{BSD, fstab.h}
@safety{@prelim{}@mtunsafe{@mtasurace{:fsent} @mtslocale{}}@asunsafe{@asucorrupt{} @ascuheap{} @asulock{}}@acunsafe{@acucorrupt{} @aculock{} @acsmem{}}}
@c getffsfile @mtasurace:fsent @mtslocale @asucorrupt @ascuheap @asulock @acucorrupt @aculock @acsmem
@c fstab_init(1) dup @mtasurace:fsent @ascuheap @asucorrupt @asulock @acucorrupt @aculock @acsmem @acsfd
@c fstab_fetch dup @mtasurace:fsent @mtslocale @asucorrupt @ascuheap @acucorrupt @aculock @acsmem
@c strcmp dup ok
@c fstab_convert dup @mtasurace:fsent
This function returns the next entry of the @file{fstab} file which has
a string equal to @var{name} pointed to by the @code{fs_file} element.
Since there is normally exactly one entry for each mount point it
makes no sense to call this function more than once for the same
argument. If this is the first call to any of the functions handling
@file{fstab} since program start or the last call of @code{endfsent},
the file will be opened.
The function returns a pointer to a variable of type @code{struct
fstab}. This variable is shared by all threads and therefore this
function is not thread-safe. If an error occurred @code{getfsent}
returns a @code{NULL} pointer.
@end deftypefun
@node mtab
@subsubsection The @file{mtab} file
The following functions and data structure access the @file{mtab} file.
@deftp {Data Type} {struct mntent}
@standards{BSD, mntent.h}
This structure is used with the @code{getmntent}, @code{getmntent_r},
@code{addmntent}, and @code{hasmntopt} functions.
@table @code
@item char *mnt_fsname
This element contains a pointer to a string describing the name of the
special device from which the filesystem is mounted. It corresponds to
the @code{fs_spec} element in @code{struct fstab}.
@item char *mnt_dir
This element points to a string describing the mount point of the
filesystem. It corresponds to the @code{fs_file} element in
@code{struct fstab}.
@item char *mnt_type
@code{mnt_type} describes the filesystem type and is therefore
equivalent to @code{fs_vfstype} in @code{struct fstab}. @file{mntent.h}
defines a few symbolic names for some of the values this string can have.
But since the kernel can support arbitrary filesystems it does not
make much sense to give them symbolic names. If one knows the symbol
name one also knows the filesystem name. Nevertheless here follows the
list of the symbols provided in @file{mntent.h}.
@vtable @code
@item MNTTYPE_IGNORE
This symbol expands to @code{"ignore"}. The value is sometimes used in
@file{fstab} files to make sure entries are not used without removing them.
@item MNTTYPE_NFS
Expands to @code{"nfs"}. Using this macro sometimes could make sense
since it names the default NFS implementation, in case both version 2
and 3 are supported.
@item MNTTYPE_SWAP
This symbol expands to @code{"swap"}. It names the special @file{fstab}
entry which names one of the possibly multiple swap partitions.
@end vtable
@item char *mnt_opts
The element contains a string describing the options used while mounting
the filesystem. As for the equivalent element @code{fs_mntops} of
@code{struct fstab} it is best to use the function @code{getsubopt}
(@pxref{Suboptions}) to access the parts of this string.
The @file{mntent.h} file defines a number of macros with string values
which correspond to some of the options understood by the kernel. There
might be many more options which are possible so it doesn't make much sense
to rely on these macros but to be consistent here is the list:
@vtable @code
@item MNTOPT_DEFAULTS
Expands to @code{"defaults"}. This option should be used alone since it
indicates all values for the customizable values are chosen to be the
default.
@item MNTOPT_RO
Expands to @code{"ro"}. See the @code{FSTAB_RO} value, it means the
filesystem is mounted read-only.
@item MNTOPT_RW
Expands to @code{"rw"}. See the @code{FSTAB_RW} value, it means the
filesystem is mounted with read and write permissions.
@item MNTOPT_SUID
Expands to @code{"suid"}. This means that the SUID bit (@pxref{How
Change Persona}) is respected when a program from the filesystem is
started.
@item MNTOPT_NOSUID
Expands to @code{"nosuid"}. This is the opposite of @code{MNTOPT_SUID},
the SUID bit for all files from the filesystem is ignored.
@item MNTOPT_NOAUTO
Expands to @code{"noauto"}. At startup time the @code{mount} program
will ignore this entry if it is started with the @code{-a} option to
mount all filesystems mentioned in the @file{fstab} file.
@end vtable
As for the @code{FSTAB_*} entries introduced above it is important to
use @code{strcmp} to check for equality.
@item mnt_freq
This elements corresponds to @code{fs_freq} and also specifies the
frequency in days in which dumps are made.
@item mnt_passno
This element is equivalent to @code{fs_passno} with the same meaning
which is uninteresting for all programs beside @code{dump}.
@end table
@end deftp
For accessing the @file{mtab} file there is again a set of three
functions to access all entries in a row. Unlike the functions to
handle @file{fstab} these functions do not access a fixed file and there
is even a thread safe variant of the get function. Besides this @theglibc{}
contains functions to alter the file and test for specific options.
@deftypefun {FILE *} setmntent (const char *@var{file}, const char *@var{mode})
@standards{BSD, mntent.h}
@safety{@prelim{}@mtsafe{}@asunsafe{@ascuheap{} @asulock{}}@acunsafe{@acsmem{} @acsfd{} @aculock{}}}
@c setmntent @ascuheap @asulock @acsmem @acsfd @aculock
@c strlen dup ok
@c mempcpy dup ok
@c memcpy dup ok
@c fopen dup @ascuheap @asulock @acsmem @acsfd @aculock
@c fsetlocking dup ok [no @mtasurace:stream @asulock: exclusive stream]
The @code{setmntent} function prepares the file named @var{FILE} which
must be in the format of a @file{fstab} and @file{mtab} file for the
upcoming processing through the other functions of the family. The
@var{mode} parameter can be chosen in the way the @var{opentype}
parameter for @code{fopen} (@pxref{Opening Streams}) can be chosen. If
the file is opened for writing the file is also allowed to be empty.
If the file was successfully opened @code{setmntent} returns a file
handle for future use. Otherwise the return value is @code{NULL}
and @code{errno} is set accordingly.
@end deftypefun
@deftypefun int endmntent (FILE *@var{stream})
@standards{BSD, mntent.h}
@safety{@prelim{}@mtsafe{}@asunsafe{@ascuheap{} @asulock{}}@acunsafe{@aculock{} @acsmem{} @acsfd{}}}
@c endmntent @ascuheap @asulock @aculock @acsmem @acsfd
@c fclose dup @ascuheap @asulock @aculock @acsmem @acsfd
This function takes for the @var{stream} parameter a file handle which
previously was returned from the @code{setmntent} call.
@code{endmntent} closes the stream and frees all resources.
The return value is @math{1} unless an error occurred in which case it
is @math{0}.
@end deftypefun
@deftypefun {struct mntent *} getmntent (FILE *@var{stream})
@standards{BSD, mntent.h}
@safety{@prelim{}@mtunsafe{@mtasurace{:mntentbuf} @mtslocale{}}@asunsafe{@asucorrupt{} @ascuheap{} @asuinit{}}@acunsafe{@acuinit{} @acucorrupt{} @aculock{} @acsmem{}}}
@c getmntent @mtasurace:mntentbuf @mtslocale @asucorrupt @ascuheap @asuinit @acuinit @acucorrupt @aculock @acsmem
@c libc_once @ascuheap @asuinit @acuinit @acsmem
@c allocate @ascuheap @acsmem
@c malloc dup @ascuheap @acsmem
@c getmntent_r dup @mtslocale @asucorrupt @ascuheap @acucorrupt @aculock @acsmem
The @code{getmntent} function takes as the parameter a file handle
previously returned by a successful call to @code{setmntent}. It returns
a pointer to a static variable of type @code{struct mntent} which is
filled with the information from the next entry from the file currently
read.
The file format used prescribes the use of spaces or tab characters to
separate the fields. This makes it harder to use names containing one
of these characters (e.g., mount points using spaces). Therefore
these characters are encoded in the files and the @code{getmntent}
function takes care of the decoding while reading the entries back in.
@code{'\040'} is used to encode a space character, @code{'\011'} to
encode a tab character, @code{'\012'} to encode a newline character,
and @code{'\\'} to encode a backslash.
If there was an error or the end of the file is reached the return value
is @code{NULL}.
This function is not thread-safe since all calls to this function return
a pointer to the same static variable. @code{getmntent_r} should be
used in situations where multiple threads access the file.
@end deftypefun
@deftypefun {struct mntent *} getmntent_r (FILE *@var{stream}, struct mntent *@var{result}, char *@var{buffer}, int @var{bufsize})
@standards{BSD, mntent.h}
@safety{@prelim{}@mtsafe{@mtslocale{}}@asunsafe{@asucorrupt{} @ascuheap{}}@acunsafe{@acucorrupt{} @aculock{} @acsmem{}}}
@c getmntent_r @mtslocale @asucorrupt @ascuheap @acucorrupt @aculock @acsmem
@c flockfile dup @aculock
@c fgets_unlocked dup @asucorrupt @acucorrupt [locked, so no @mtsrace:stream]
@c funlockfile dup @aculock
@c strchr dup ok
@c strspn dup ok
@c strsep dup ok
@c decode_name ok
@c sscanf dup @mtslocale @ascuheap @acsmem
The @code{getmntent_r} function is the reentrant variant of
@code{getmntent}. It also returns the next entry from the file and
returns a pointer. The actual variable the values are stored in is not
static, though. Instead the function stores the values in the variable
pointed to by the @var{result} parameter. Additional information (e.g.,
the strings pointed to by the elements of the result) are kept in the
buffer of size @var{bufsize} pointed to by @var{buffer}.
Escaped characters (space, tab, backslash) are converted back in the
same way as it happens for @code{getmentent}.
The function returns a @code{NULL} pointer in error cases. Errors could be:
@itemize @bullet
@item
error while reading the file,
@item
end of file reached,
@item
@var{bufsize} is too small for reading a complete new entry.
@end itemize
@end deftypefun
@deftypefun int addmntent (FILE *@var{stream}, const struct mntent *@var{mnt})
@standards{BSD, mntent.h}
@safety{@prelim{}@mtsafe{@mtsrace{:stream} @mtslocale{}}@asunsafe{@asucorrupt{}}@acunsafe{@acucorrupt{}}}
@c addmntent @mtasurace:stream @mtslocale @asucorrupt @acucorrupt
@c fseek dup @asucorrupt @acucorrupt [no @aculock]
@c encode_name ok
@c fprintf dup @mtslocale @asucorrupt @acucorrupt [no @ascuheap @acsmem, no @aculock]
@c fflush dup @asucorrupt @acucorrupt [no @aculock]
The @code{addmntent} function allows adding a new entry to the file
previously opened with @code{setmntent}. The new entries are always
appended. I.e., even if the position of the file descriptor is not at
the end of the file this function does not overwrite an existing entry
following the current position.
The implication of this is that to remove an entry from a file one has
to create a new file while leaving out the entry to be removed and after
closing the file remove the old one and rename the new file to the
chosen name.
This function takes care of spaces and tab characters in the names to be
written to the file. It converts them and the backslash character into
the format described in the @code{getmntent} description above.
This function returns @math{0} in case the operation was successful.
Otherwise the return value is @math{1} and @code{errno} is set
appropriately.
@end deftypefun
@deftypefun {char *} hasmntopt (const struct mntent *@var{mnt}, const char *@var{opt})
@standards{BSD, mntent.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c hasmntopt ok
@c strlen dup ok
@c strstr dup ok
@c strchr dup ok
This function can be used to check whether the string pointed to by the
@code{mnt_opts} element of the variable pointed to by @var{mnt} contains
the option @var{opt}. If this is true a pointer to the beginning of the
option in the @code{mnt_opts} element is returned. If no such option
exists the function returns @code{NULL}.
This function is useful to test whether a specific option is present but
when all options have to be processed one is better off with using the
@code{getsubopt} function to iterate over all options in the string.
@end deftypefun
@node Other Mount Information
@subsubsection Other (Non-libc) Sources of Mount Information
On a system with a Linux kernel and the @code{proc} filesystem, you can
get information on currently mounted filesystems from the file
@file{mounts} in the @code{proc} filesystem. Its format is similar to
that of the @file{mtab} file, but represents what is truly mounted
without relying on facilities outside the kernel to keep @file{mtab} up
to date.
@node Mount-Unmount-Remount, , Mount Information, Filesystem Handling
@subsection Mount, Unmount, Remount
This section describes the functions for mounting, unmounting, and
remounting filesystems.
Only the superuser can mount, unmount, or remount a filesystem.
These functions do not access the @file{fstab} and @file{mtab} files. You
should maintain and use these separately. @xref{Mount Information}.
The symbols in this section are declared in @file{sys/mount.h}.
@deftypefun {int} mount (const char *@var{special_file}, const char *@var{dir}, const char *@var{fstype}, unsigned long int @var{options}, const void *@var{data})
@standards{SVID, sys/mount.h}
@standards{BSD, sys/mount.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall.
@code{mount} mounts or remounts a filesystem. The two operations are
quite different and are merged rather unnaturally into this one function.
The @code{MS_REMOUNT} option, explained below, determines whether
@code{mount} mounts or remounts.
For a mount, the filesystem on the block device represented by the
device special file named @var{special_file} gets mounted over the mount
point @var{dir}. This means that the directory @var{dir} (along with any
files in it) is no longer visible; in its place (and still with the name
@var{dir}) is the root directory of the filesystem on the device.
As an exception, if the filesystem type (see below) is one which is not
based on a device (e.g. ``proc''), @code{mount} instantiates a
filesystem and mounts it over @var{dir} and ignores @var{special_file}.
For a remount, @var{dir} specifies the mount point where the filesystem
to be remounted is (and remains) mounted and @var{special_file} is
ignored. Remounting a filesystem means changing the options that control
operations on the filesystem while it is mounted. It does not mean
unmounting and mounting again.
For a mount, you must identify the type of the filesystem with
@var{fstype}. This type tells the kernel how to access the filesystem
and can be thought of as the name of a filesystem driver. The
acceptable values are system dependent. On a system with a Linux kernel
and the @code{proc} filesystem, the list of possible values is in the
file @file{filesystems} in the @code{proc} filesystem (e.g. type
@kbd{cat /proc/filesystems} to see the list). With a Linux kernel, the
types of filesystems that @code{mount} can mount, and their type names,
depends on what filesystem drivers are configured into the kernel or
loaded as loadable kernel modules. An example of a common value for
@var{fstype} is @code{ext2}.
For a remount, @code{mount} ignores @var{fstype}.
@c This is traditionally called "rwflag" for historical reasons.
@c No point in confusing people today, though.
@var{options} specifies a variety of options that apply until the
filesystem is unmounted or remounted. The precise meaning of an option
depends on the filesystem and with some filesystems, an option may have
no effect at all. Furthermore, for some filesystems, some of these
options (but never @code{MS_RDONLY}) can be overridden for individual
file accesses via @code{ioctl}.
@var{options} is a bit string with bit fields defined using the
following mask and masked value macros:
@vtable @code
@item MS_MGC_MASK
This multibit field contains a magic number. If it does not have the value
@code{MS_MGC_VAL}, @code{mount} assumes all the following bits are zero and
the @var{data} argument is a null string, regardless of their actual values.
@item MS_REMOUNT
This bit on means to remount the filesystem. Off means to mount it.
@c There is a mask MS_RMT_MASK in mount.h that says only two of the options
@c can be reset by remount. But the Linux kernel has its own version of
@c MS_RMT_MASK that says they all can be reset. As far as I can tell,
@c libc just passes the arguments straight through to the kernel.
@item MS_RDONLY
This bit on specifies that no writing to the filesystem shall be allowed
while it is mounted. This cannot be overridden by @code{ioctl}. This
option is available on nearly all filesystems.
@item MS_NOSUID
This bit on specifies that Setuid and Setgid permissions on files in the
filesystem shall be ignored while it is mounted.
@item MS_NOEXEC
This bit on specifies that no files in the filesystem shall be executed
while the filesystem is mounted.
@item MS_NODEV
This bit on specifies that no device special files in the filesystem
shall be accessible while the filesystem is mounted.
@item MS_SYNCHRONOUS
This bit on specifies that all writes to the filesystem while it is
mounted shall be synchronous; i.e., data shall be synced before each
write completes rather than held in the buffer cache.
@item MS_MANDLOCK
This bit on specifies that mandatory locks on files shall be permitted while
the filesystem is mounted.
@item MS_NOATIME
This bit on specifies that access times of files shall not be updated when
the files are accessed while the filesystem is mounted.
@item MS_NODIRATIME
This bit on specifies that access times of directories shall not be updated
when the directories are accessed while the filesystem in mounted.
@c there is also S_QUOTA Linux fs.h (mount.h still uses its former name
@c S_WRITE), but I can't see what it does. Turns on quotas, I guess.
@end vtable
Any bits not covered by the above masks should be set off; otherwise,
results are undefined.
The meaning of @var{data} depends on the filesystem type and is controlled
entirely by the filesystem driver in the kernel.
Example:
@smallexample
@group
#include <sys/mount.h>
mount("/dev/hdb", "/cdrom", MS_MGC_VAL | MS_RDONLY | MS_NOSUID, "");
mount("/dev/hda2", "/mnt", MS_MGC_VAL | MS_REMOUNT, "");
@end group
@end smallexample
Appropriate arguments for @code{mount} are conventionally recorded in
the @file{fstab} table. @xref{Mount Information}.
The return value is zero if the mount or remount is successful. Otherwise,
it is @code{-1} and @code{errno} is set appropriately. The values of
@code{errno} are filesystem dependent, but here is a general list:
@table @code
@item EPERM
The process is not superuser.
@item ENODEV
The file system type @var{fstype} is not known to the kernel.
@item ENOTBLK
The file @var{dev} is not a block device special file.
@item EBUSY
@itemize @bullet
@item
The device is already mounted.
@item
The mount point is busy. (E.g. it is some process' working directory or
has a filesystem mounted on it already).
@item
The request is to remount read-only, but there are files open for writing.
@end itemize
@item EINVAL
@itemize @bullet
@item
A remount was attempted, but there is no filesystem mounted over the
specified mount point.
@item
The supposed filesystem has an invalid superblock.
@end itemize
@item EACCES
@itemize @bullet
@item
The filesystem is inherently read-only (possibly due to a switch on the
device) and the process attempted to mount it read/write (by setting the
@code{MS_RDONLY} bit off).
@item
@var{special_file} or @var{dir} is not accessible due to file permissions.
@item
@var{special_file} is not accessible because it is in a filesystem that is
mounted with the @code{MS_NODEV} option.
@end itemize
@item EM_FILE
The table of dummy devices is full. @code{mount} needs to create a
dummy device (aka ``unnamed'' device) if the filesystem being mounted is
not one that uses a device.
@end table
@end deftypefun
@deftypefun {int} umount2 (const char *@var{file}, int @var{flags})
@standards{GNU, sys/mount.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall.
@code{umount2} unmounts a filesystem.
You can identify the filesystem to unmount either by the device special
file that contains the filesystem or by the mount point. The effect is
the same. Specify either as the string @var{file}.
@var{flags} contains the one-bit field identified by the following
mask macro:
@vtable @code
@item MNT_FORCE
This bit on means to force the unmounting even if the filesystem is
busy, by making it unbusy first. If the bit is off and the filesystem is
busy, @code{umount2} fails with @code{errno} = @code{EBUSY}. Depending
on the filesystem, this may override all, some, or no busy conditions.
@end vtable
All other bits in @var{flags} should be set to zero; otherwise, the result
is undefined.
Example:
@smallexample
@group
#include <sys/mount.h>
umount2("/mnt", MNT_FORCE);
umount2("/dev/hdd1", 0);
@end group
@end smallexample
After the filesystem is unmounted, the directory that was the mount point
is visible, as are any files in it.
As part of unmounting, @code{umount2} syncs the filesystem.
If the unmounting is successful, the return value is zero. Otherwise, it
is @code{-1} and @code{errno} is set accordingly:
@table @code
@item EPERM
The process is not superuser.
@item EBUSY
The filesystem cannot be unmounted because it is busy. E.g. it contains
a directory that is some process's working directory or a file that some
process has open. With some filesystems in some cases, you can avoid
this failure with the @code{MNT_FORCE} option.
@item EINVAL
@var{file} validly refers to a file, but that file is neither a mount
point nor a device special file of a currently mounted filesystem.
@end table
This function is not available on all systems.
@end deftypefun
@deftypefun {int} umount (const char *@var{file})
@standards{SVID, sys/mount.h}
@standards{GNU, sys/mount.h}
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
@c Direct syscall or wrapper for umount2.
@code{umount} does the same thing as @code{umount2} with @var{flags} set
to zeroes. It is more widely available than @code{umount2} but since it
lacks the possibility to forcefully unmount a filesystem is deprecated
when @code{umount2} is also available.
@end deftypefun