There are plans to add session-dependent defaults to GSettings
(based on the newly standardized XDG_CURRENT_DESKTOP); until
then, the WM uses a different schema for its button-layout
setting in classic mode. So for the time being, do the same
and pick the alternative schema when XDG_CURRENT_DESKTOP
indicates that we are in a classic session.
(It's not pretty, but hopefully won't be with us for too long ...)
https://bugzilla.gnome.org/show_bug.cgi?id=731273
Pick up the setting from the org.gnome.desktop.wm.preferences schema
if available. It is slightly more involved than other settings, as
the actual button names used in the schema differ from the ones we
use, so we need an additional translation step.
https://bugzilla.gnome.org/show_bug.cgi?id=731273
When the pointer cursor is updated on CSW, lookup for either a device
cursor, or a global one. It would previously lookup for windows with
a global cursor, and then check if it had a device cursor, which would
skip windows with only device cursors set, and unexpectedly set the
global cursor.
This avoids a bunch of policy problems with deciding how to lay
out the window menu under different WMs.
For now, we use the special event _GTK_SHOW_WINDOW_MENU, but we
hope to have this standardized in wm-spec quite soon, as KDE wants
it as well.
All the globals we care about should appear before doing anything
else, up-front, so a single round-trip after adding the registry
should be more than enough.
Since you can't take grabs on unmapped windows, GtkMenu takes a grab on
the menu in a convoluted way: it first grabs another window, shows the
menu window, and then transfers the grab over to the GtkMenu widget.
For normal menubars, this is perfectly fine, as the first window it grabs
is our toplevel, and that gets picked up in our transient path. For
GtkMenuButton or other spurious uses of gtk_menu_popup, it creates a new
temporary input-only window which it takes the grab on, known as the "grab
transfer window". Since this window isn't a transient-for of our new menu
widget window, the grab isn't noticed when we go to show it, and thus the
menu ends up as a new toplevel.
Add a special hack to GtkMenu and the Wayland backend which lets us notice
this "grab transfer window", and include it in our grab finding path.
It's sort of terrible to have to hack up the widgets instead of just the
backend, but the alternative would be an entirely new window type which is
managed correctly by GDK. I don't want to write that.
Wayland's mechanism tells us all of our new states, rather than
telling us which ones were added and removed. Add a new private
interface so that we can simply specify the new states as a
bitfield directly rather than having to compute which ones were
added and removed.
Rendering doesn't do much about clipping drawing operations to the window shape,
although invalidation applies the shape to every window, leaving possibly trails
of "overrendered" content. So ensure the shape portions get invalidated too when
the window is moved/resized.
https://bugzilla.gnome.org/show_bug.cgi?id=729095
It may happen that the received clipboard data is empty, but
if it's of type image/bmp, gtk+ will crash:
gdk_property_change: 00030AD4 GDK_SELECTION image/bmp REPLACE 8*0 bits:
... delayed rendering
gdk_selection_send_notify_for_display: 00030AD4 CLIPBOARD image/bmp
GDK_SELECTION (no-op)
_gdk_win32_selection_convert_to_dib: 1252003C image/bmp
Program received signal SIGSEGV, Segmentation fault.
0x749a9f40 in msvcrt!memmove () from C:\Windows\syswow64\msvcrt.dll
Thread 1 (Thread 2248.0x1b34):
target=0xc07b) at gdkselection-win32.c:1292
at gdkevents-win32.c:3498
wparam=8, lparam=0) at gdkevents-win32.c:232
message=773, wparam=8, lparam=0)
at gdkevents-win32.c:263
C:\Windows\syswow64\user32.dll
C:\Users\rugoosse\AppData\Local\virt-viewer\bin\libpangocairo-1.0-0.dll
wparam=0, lparam=-1687549457)
at gdkevents-win32.c:248
C:\Users\rugoosse\AppData\Local\virt-viewer\bin\libpangocairo-1.0-0.dll
https://bugzilla.gnome.org/show_bug.cgi?id=728745
The events are routed through a new slave device with type
GDK_SOURCE_TOUCHSCREEN, minimal tracking of touches is done
to keep the state for each of those.
https://bugzilla.gnome.org/show_bug.cgi?id=728426
The master pointer/keyboard pair should never disappear or be
inconsistent. The seat capabilities are now reflected through
slave devices, those may come and go freely as the seat
capabilities change. This also enables adding further capabilities
to handle eg. touch.
https://bugzilla.gnome.org/show_bug.cgi?id=728426
Get monitor on which the most of the window is located (nearest monitor if
window is not on screen), get its work area (area not occupied by taskbar or
any other bars) and use that for maxsize.
Previous default of 30000 meant that windows maximized onto full screen,
even covering the area where taskbar is.
https://bugzilla.gnome.org/show_bug.cgi?id=726592
...on Windows 8+ and when the system setting for non-Unicode programs do
not match the language version of Windows by falling back to using Pango.
This ensures that the correct font is used during these scenarios, so that
we minimize the risk of seeing garbled characters for texts that the system
code page does not support due to system peculiarties. There might be a
way to support gtk-font-name handling using the native Windows APIs
directly on Windows 8+, but that needs to be investigated.
https://bugzilla.gnome.org/show_bug.cgi?id=726298
The compositing that is meant here is really specific to the
X11 Composite extension, and does not apply to Wayland.
This is very rarely used functionality anyway, and none of
the other backends support it.
Theoretically, we apply the shape mask client-side ourselves
with an ARGB32 pixmap and intersect it to get a union shape,
but I don't particularly care enough to write that code.
Realistic application code using bounding shapes in 2014 is
quite rare.
It seems that some backends implemented get_root_origin wrong
and returned the client window coordinates, not the frame window
coordinates. Since it's possible to implement generically for all
windows, let's do that instead of having a separate impl vfunc.
Lots of code, including dragging code in GtkWindow, use these
fields. Setting them to 0 causes lots of strange and weird bugs.
Use the same "hack" from query_device_state of just using
win_x / win_y for now. We'll convert this to the proper fake root
coordinate system used by get_root_coords in the next commit.
And the counterpart to unmaximize when dragging a maximized window, if
touch devices aren't going to use EWMH moveresize, having this one at least
makes things feel a bit less awkward.
https://bugzilla.gnome.org/show_bug.cgi?id=709914
Sadly, EWMH moveresize mechanism can't work with touch devices for two
reasons:
1) As a mutter implementation detail, the device is queried in order
to check whether the dragging button is still pressed. Touch devices
won't report the button 1 being pressed through pointer emulation.
2) Even bypassing that check, on X11 touch events are selected prior
to sequences being started, either through XISelectEvents or
XIGrabTouchBegin, no late registering through active grabs is allowed,
as WMs do on reaction to EWMH moveresize messages.
So for the time being, make touch devices fallback on emulated window
dragging, which at least allows for moving windows.
https://bugzilla.gnome.org/show_bug.cgi?id=709914
Add gdk_device_get_last_event_window(), and use to implement the window
tracking we need for synthesizing crossing events for sensitivity changes
and gtk grabs, rather than keeping the information in qdata and updating
it based when GTK+ gets events.
https://bugzilla.gnome.org/show_bug.cgi?id=726187
eb1ab0dac2 removed support for authentication
based on crypt()-hashed passwords but it didn't remove the header.
Finish up with the removal.
This allows the broadway backend to build on FreeBSD (which has no
crypt.h).
https://bugzilla.gnome.org/show_bug.cgi?id=726149
window->x / window->y are in "root window coordinates", e.g. relative
to the topmost toplevel. However, the coordinates in get_xdg_popup are
relative to the passed-in surface, so we need to do the reverse
translation here.
We have a hack in the XSETTINGS code to substitute gtk-xft-dpi
with gdk-unscaled-dpi unless the screen has a fixed window scale,
in which case we just use gtk-xft-dpi.
But if the screen is changed to have a fixed window scale, then
the substituted value of gdk-unscaled-dpi will stick around until
the next (coincidental) change to XSETTINGS. To fix this, force
an immediate reread of the XSETTINGS property when
gdk_x11_display_set_window_scale() is used.
https://bugzilla.gnome.org/show_bug.cgi?id=725754
The point of GdkWindowImpl::get_root_coords is to translate the passed
in coordinates against the passed-in impl window. For a child window,
in fact, window->abs_x and window->abs_y already track the child
window's coordinates against the impl window.
If we pass in a child window, and backends don't explicitly get the impl
window from it, we'll double-count the child window.
Really, we should *always* be passing impl windows to backends, and
never child windows. However, I'm a bit worried for regressions late
in the cycle if we want to fix up the rest of the callers, like
gdk_window_get_geometry, so I'm only going to touch get_root_coords
for now after careful review of all the backends.
GtkWindow calls set_shadow_width then maps the window, meaning
that we never set the margin. Save it when we set and then set
it when we create the XDG surface.
Instead of destroying the surface in the backend if this is
unable to resize, let the core code do it, and do it properly.
Based on a patch by Benjamin Otte.
https://bugzilla.gnome.org/show_bug.cgi?id=725172
The code in GDK is incredibly broken and nobody is quite sure what's
right-side-up and what's upside down, but this breaks mutter-wayland
now, so let's remove it. It might leak, but we should probably do a
full restructuring of GDK drawing to fix it.
Like in other backends (except X) we can't resize cairo image surfaces
so let's sync the code here with what the other backends do.
This prevents the painting machinery above us to paint on the wrong
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=724968
We can't destroy buffers if they're in-use by the compositor. Well,
technically we can, but that is considered undefined by Wayland and
mutter won't cope with it very well -- it simply kills the client.
To solve this, we need to delay the destroy operation until the
compositor tells us that it's released the buffer. To do this, hold
an extra ref on the cairo surface as long as the surface is in-use
by the compositor.
This prevents warnings like
(gtk3-demo:14948): Gdk-CRITICAL **: _gdk_frame_clock_thaw: assertion 'GDK_IS_FRAME_CLOCK (clock)' failed
(gtk3-demo:14948): Gdk-CRITICAL **: gdk_frame_clock_get_timings: assertion 'GDK_IS_FRAME_CLOCK (frame_clock)' failed
We need to do this, as the compositor might have already sent us a frame
event, in-flight, at the same time we destroy our window. In this case, we'll
receive the then-in-flight "done" event, and then warn as we try to look
up the frame clock on a destroyed window.
Put dialogs and utility windows in the same level as normal and
toolbar windows so that Gtk can control their stacking instead of
forcing them, rather unnaturally, to be on top of all other windows,
even other application windows, even when another application has
focus.
This setting will let us keep traditional appearance
of dialogs on platforms where this is expected.
The new setting is called gtk-dialogs-use-header, backed
by the Gtk/DialogsUseHeader xsetting.
The EWMH defines _NET_WM_MOVERESIZE_SIZE_KEYBOARD and
_NET_WM_MOVERESIZE_MOVE_KEYBOARD for operations that are not
initiated by a button-press event. Allow using these by passing
a button of 0 to gdk_window_begin_move/resize_drag.
fvwm seems to have problems keeping _NET_WORKAREA in sync with
the number of desktops. Instead of reading garbage, silently use
the full screen as workarea for desktops that are not covered
by the _NET_WORKAREA property.
https://bugzilla.gnome.org/show_bug.cgi?id=698248
Applications need a way to fix or adapt the decoration layout,
for situations like split header bars. Setting the layout from
the theme with a style property did not offer a good way to do
this, and the ::show-close-button property does not provide
fine-grained control.
To improve the situation, move the layout string to a property of
GtkHeaderBar which is backed by a setting. This allows platforms to
set a default button layout independent of the theme, while applications
can override the default.
The style GtkWindow style property is now deprecated and ignored.
Since update_windows list is a static variable in GdkWindow.c which
contains pointers to windows which needs to be updated, it can happen
that it contains a pointer to a window even after quit from a gtk_main().
If another gtk_main() is called in the same process it tries to process
windows in the list which leads to a crash.
Correct reference count handling of added windows prevents such applications
from crash.
https://bugzilla.gnome.org/show_bug.cgi?id=711552
And deprecate the X11-specific version of it.
We call this new API _set_shadow_width() and not _set_frame_extents()
because we already have a gdk_window_get_frame_extents() with a
different meaning and different type of value.
https://bugzilla.gnome.org/show_bug.cgi?id=720374
The focus handling code is shared between core and XI2 implementations,
so just handle the extra XI2 types for passive grabs. Those must be dealt
with in the same way than active grabs. Focus events with this crossing
mode could happen currently through the XIGrabFocusIn passive grab.
https://bugzilla.gnome.org/show_bug.cgi?id=719762
This fixes potential assertions if a GTK+ app gets to receive
a XINotifyPassiveGrab/Ungrab pointer crossing event, currently
triggerable by XIGrabEnter passive grabs.
http://bugzilla.gnome.org/show_bug.cgi?id=719762
This is so we always have the latest information given by XRandR (or other), and not
rely on Core protocol information that might not have been updated yet.
This is specially visible when a monitor is connected (less frequent) or disconnected
(much more frequent), callbacks on GdkScreen::monitors-changed that call
gdk_screen_get_width/height() could get the screen size previous to the monitor
rearrangement.
So in order to fix this, keep track of the latest monitors information, and calculate
the bounding box in order to know the screen size.
https://bugzilla.gnome.org/show_bug.cgi?id=715029
Scroll valuators were being just appended again and again, leading
to 1) a growing memory issue anytime a device changed 2) the first
scroll valuators to stay permanent on the application lifetime, as
the first stored valuators would always match.
https://bugzilla.gnome.org/show_bug.cgi?id=705203
Passive grabs may take pointer focus out of the application, even though
the pointer didn't leave the window, but those events still trigger resetting
of the scroll axes. This is most visible with compiz, and possibly other
reparenting WMs, where passive grabs happen on the WM-managed window that
is a parent of the application toplevel.
As it is not possible to have scrolling happening on the timespan a passive
grab takes action, it is entirely safe for GTK+ to assume none happened if
it gets a crossing event of that nature.
https://bugzilla.gnome.org/show_bug.cgi?id=699574#c33
This information will be useful in case someone stumbles on a situation
similar to https://bugzilla.gnome.org/show_bug.cgi?id=699574, so we can
figure out where do the crossing events come from or go to easily.
It's been reported in several applications that scrolling feels jerky
since commit cc7b3985b3.
Investigation reported that the combination of passive 4-7 button grabs
on the toplevel and the presence of native subwindows might trigger
too often crossing events from the child window to the toplevel and
back as scroll "buttons" trigger the passive grab. Those crossing events
would reset the scroll valuators rendering scrolling from jerky on
touchpads (where there's intermediate smooth events between the emulated
button ones) to ineffective on regular mouse wheels (where the crossing
event would reset the valuators right before the single smooth scroll
event we get is delivered)
So, only reset scroll valuators when the pointer enters the toplevel
(we only care about this when the pointer is on the window after it's
been possibly scrolling somewhere else), and it doesn't come from an
inferior.
The situations where this happened varied though, the native subwindow
could be one created explicitly by the application, or created indirectly
through gdk_window_ensure_native(). The latter was mainly the case for
evolution (through gtk_selection_set_owner()) and any GtkScrolledWindow
under the oxygen-gtk3 theme (through gdk_window_set_composited())
https://bugzilla.gnome.org/show_bug.cgi?id=699574
Add a GtkSetting for whether the desktop shell is showing the desktop
folder icons.
This is on by default because most desktop shells do show the icons on
the desktop. We already have a patch in gnome-settings-daemon to bind
this to the org.gnome.desktop.background show-desktop-icons GSettings
key which is off by default on GNOME.
https://bugzilla.gnome.org/show_bug.cgi?id=712302
We add a custom im module for broadway that calls some broadway
specific APIs to show/hide the keyboard on focus in/out. We then forward this
to the browser, and on the ipad we focus an input field to activate
the keyboard.
