2004-07-20 Matthias Clasen <mclasen@redhat.com>
* tests/testactions.c (main):
* tests/testmerge.c (main): Add some refcount debugging.
* gtk/gtkuimanager.c (update_node, free_node): Ref an sink
all proxies, so that we can properly clean up floating proxies
which the app didn't adopt. (#147926, Tommi Komulainen)
Sat Jun 5 20:05:39 2004 Soeren Sandmann <sandmann@daimi.au.dk>
* tests/testmerge.c: Add a checkbox to queue an
merge/unmerge. Patch from Matthias Clasen.
* gtk/gtktoolbar.c (struct _GtkToolbarPrivate): Add a new flag
"need_rebuild"
(rebuild_menu): New function that rebuilds the overflow menu and
makes sure it doesn't start or end with a separator.
(toolbar_content_new_tool_item)
(toolbar_content_remove)
(toolbar_content_new_compatibility): Set the rebuild_needed flag
(gtk_toolbar_size_allocate): Only show the overflow arrow when we
have actually overflown an item with a proxy menu item. Also make
sure we rebuild the menu if needed.
Fix#125504, #142377, #143463
* gtk/gtkseparatortoolitem.c (gtk_separator_tool_item_expose):
Obey the "priv->draw" flag. (#143692)
2004-03-05 Federico Mena Quintero <federico@ximian.com>
Fixes#136082 and #135265, patch by Morten Welinder.
* configure.in: Use AC_SYS_LARGEFILE.
* */*.c: #include <config.h>
Mon Jan 12 23:40:34 2004 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c: Adjust to the new connect_proxy signals.
* gtk/gtkuimanager.c
* gtk/gtkactiongroup.c
* gtk/gtkaction.c: Move the connect_proxy and disconnect_proxy signals
from GtkAction to GtkActionGroup and proxy it on GtkUIManager. This
removes the confusion between the disconnect_/connect_proxy signals
and the (unrelated) virtual functions of the same name and aligns
the setup with the pre_/post_activate signals.
2004-01-12 Jody Goldberg <jody@gnome.org>
* gtk/gtkaction.c (connect_proxy) : only connect activate for menus
with no submenus otherwise it looks like we activate every time a
submenu opens.
2004-01-10 Jody Goldberg <jody@gnome.org>
* gtk/gtkuimanager.c (d) : Add a debug macro to quiet the spew.
s/merge_signals/ui_manager_signals/ for readability.
(gtk_ui_manager_class_init) : add pre_activate and post_activate
signals.
(cb_proxy_pre_activate) : new.
(cb_proxy_post_activate) : new.
(gtk_ui_manager_insert_action_group) : connect the proxies for
GtkActionGroup::pre/post_activate
(gtk_ui_manager_remove_action_group) : disconnect them.
* gtk/gtkactiongroup.c (gtk_action_group_class_init) : add
'sensitive', and 'visible' properties. Also add pre_activate and
post_activate signals to help deal with activations at a higher
level (eg GtkUIManager)
(gtk_action_group_init) : init sensitive and visible
(gtk_action_group_set_property) : add sensitive and visible
(gtk_action_group_get_property) : add sensitive and visible
(gtk_action_group_get_sensitive) : new.
(gtk_action_group_get_visible) : new.
(cb_set_action_sensitivity) : new with minor optimization that only
signals sensitivity changes if the action could possibly change.
(cb_set_action_visiblility) : ditto.
(gtk_action_group_set_sensitive) : new. walk the actions directly
rather than using notify::sensitive because that is simpler, easier
to read, and more efficient.
(gtk_action_group_set_visible) : ditto.
(gtk_action_group_add_action) : Each action can only be in 1 group,
set GtkAction::action_group.
(gtk_action_group_remove_action) : clear it.
(gtk_action_group_add_toggle_actions_full) : warning suppression.
(gtk_action_group_add_radio_actions_full) : warning suppression.
(_gtk_action_group_emit_pre_activate) : new protected routine for use
by GtkAction.
(_gtk_action_group_emit_post_activate) : ditto.
* gtk/gtkaction.c (gtk_action_class_init) : add 'action_group' property.
(gtk_action_init) : initialize it.
(gtk_action_get_property) : get.
(gtk_action_set_property) : set it via
(gtk_action_set_action_group) : new function.
(gtk_action_sync_sensitivity) : new routine to sync proxy sensitivity
with the logical sensitivity (action & group) rather than the simple
action::sensitivity.
(gtk_action_sync_visible) : use gtk_action_is_visible to handle
logical visibility (action & group) rather than the simple
action::visible. Use widget show/hide directly.
(connect_proxy) : handle the custom sensitivity handler.
Make the TOOL_BUTTON signals more general and support TOOL_ITEM
directly, with special cases for TOOL_BUTTON. Still not especially
good it might be useful to handle label/use_underline by parmspec
lookup. Those are likely to be implemented by custom types, and are
assumed to exist in GtkToolItem.
(disconnect_proxy) : disconnect the new sensitivity handler.
(_gtk_action_emit_activate) : add pre/post signals.
(gtk_action_activate) : use logical sensitivity.
(gtk_action_is_sensitive) : logical sensitivity.
(gtk_action_get_sensitive) : actual sensitivity.
(closure_accel_activate) : use logical sensitivity.
Fri Jan 9 00:34:57 2004 Matthias Clasen <maclas@gmx.de>
* gtk/gtkuimanager.h:
* gtk/gtkuimanager.c (gtk_ui_manager_get_toplevels): New function to
obtain a list of toplevel widgets constructed by the ui manager.
* gtk/gtkuimanager.h (GtkUIManagerItemType): Change to flags, so that
the values can be combined for gtk_ui_manager_get_toplevels().
* tests/testmerge.c: Add a "Dump toplevels" button to test
gtk_ui_manager_get_toplevels().
Wed Dec 31 02:05:39 2003 Matthias Clasen <maclas@gmx.de>
* gtk/gtkactiongroup.c (gtk_action_group_add_actions_full):
(gtk_action_group_add_toggle_actions_full):
(gtk_action_group_add_radio_actions_full): Pull accelerator key
from the stock item if stock_id is given, but accelerator
not. (Noticed by Jeff Franks and Jody Goldberg)
* tests/testmerge.c: Remove the accelerator from the "Open" entry
to test the above change.
2003-11-15 Hans Breuer <hans@breuer.org>
* gdk/makefile.msc gdk/gdk.def
gtk/gtk.def gtk/makefile.msc.in : updated
* tests/makefile.msc : added all the new tests
* gtk/gtkfilefilter.c(finalize) : initialize filter
from object not from itself
* gtk/gtkfilesystemwin32.[hc] : copied from gtkfilesystemunix.[hc]
modified as less as posible to have aworking implementation
on win32. There maybe the desire to merge the unchanged pats into
a common base class.
Also implemented a simple glib based bookmark handling, which
is currently missing in gtkfilesystemunix.[hc] but can be copied
over there.
* gtk/gtkfilechooserwidget.c : conditional include gtkfilesystemwin32.h
* gdk/win32/gdkwindow-win32.c : implement
gdk_window_set_keep_above() and gdk_window_set_keep_below()
* tests/testmerge.c : don't include unistd.h unconditionally,
#define STDOUT_FILENO if it isn't defined
* tests/testfilechooser.c : make it compile on win32
2003-10-01 Matthias Clasen <maclas@gmx.de>
* gtk/gtkaction.c (gtk_action_class_init):
(gtk_action_[gs]et_property): Introduce a separate
"hide_if_empty" property for empty menu handling.
(_gtk_action_sync_menu_visible): ...and use it here.
* tests/testmerge.c (main): ...and here.
2003-09-30 Matthias Clasen <maclas@gmx.de>
* tests/merge-*.ui:
* tests/testmerge.c: Test handling of empty menus.
* gtk/gtkuimanager.c (_gtk_menu_is_empty): New function to determine
whether a menu is empty. Used in gtkaction.c.
(update_smart_separators): Also update the visibility of empty menus.
(update_node): When creating a new menu proxy, insert an "Empty" menu
item which only gets shown if the menu is empty.
* gtk/gtkaction.c (gtk_action_class_init): Document the meaning of
"is_important" for menu proxies.
(_gtk_action_sync_menu_visible): New function to sync the visibility
of menu proxies. Used in gtkuimanager.c.
(gtk_action_sync_visible): New function to sync the visibility of
proxies.
2003-09-27 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c: Demonstrate the use of the
connect-proxy signal.
* gtk/gtkaction.c (connect_proxy): Add connect-proxy and
disconnect-proxy signals to do small customizations
like displaying tooltips in the statusbar without
custom actions. (#122894, Philip Langdale)
* gtk/gtkuimanager.c (update_node): Don't leak tooltip.
2003-09-22 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c (main): Initially activate the JUSTIFY_RIGHT
group member to test the fix for #122904.
* gtk/gtkactiongroup.c (gtk_action_group_add_radio_actions_full):
Add the action to the group before activating it, otherwise we
may end up with multiple active group members. (#122904, Marco
Pesenti Gritti)
2003-09-18 Matthias Clasen <maclas@gmx.de>
Install accelerators on actions, not on proxies, support
accelerator-only actions:
* gtk/gtkmenu.c (get_accel_path): New function to get the accel path
and its lock status either via _gtk_widget_get_accel_path() or by
looking at the accel_path stored in the menu item itself and determining
its lock status by peeking into the contained accel label. This was
already (accidentally) committed a week ago.
* gtk/gtkaction.h (gtk_action_set_accel_group):
(gtk_action_[dis]connect_accelerator): New functions.
* gtk/gtkaction.c (struct _GtkActionPrivate): Add accel_group,
accel_closure and accel_count. We must have a reference to the accel_group,
since we need it in connect_proxy. The count is necessary to ensure
that the accelerator isn't removed before the last proxy requesting
it has been unmerged.
(connect_proxy): Connect the accelerator to the
action now, only set the accel_path on the menuitem.
(remove_proxy): Disconnect the accelerator from the action, not from
the menuitem.
(gtk_action_set_accel_group): Set the accel group.
(gtk_action_[dis]connect_accelerator): Count the number of times
this functions have been called and install/remove the accelerator if
the count leaves/reaches zero.
* gtk/gtkuimanager.h (GtkUIManagerItemType): Add
GTK_UI_MANAGER_ACCELERATOR.
* gtk/gtkuimanager.c (NodeType): Add NODE_TYPE_ACCELERATOR.
(start_element_handler): Create NODE_TYPE_ACCELERATOR nodes from
<accelerator> elements.
(gtk_ui_manager_add_ui): Create NODE_TYPE_ACCELERATOR nodes when
type is GTK_UI_MANAGER_ACCELERATOR.
(update_node): Set the accel group on actions before creating their
proxies. Don't set the accel group on created menus. For
NODE_TYPE_ACCELERATOR nodes, [dis]connect the actions' accelerator.
(print_node): Also emit <accelerator> elements.
* tests/testmerge.c (dump_accels): Add a "Dump Accels" button.
2003-09-15 Matthias Clasen <maclas@gmx.de>
* gtk/gtkactiongroup.[hc]: (gtk_action_group_add_radio_actions):
(gtk_action_group_add_radio_actions_full): Add value parameter to allow
setting the currently selected group member before connecting signals.
(GtkToggleActionEntry): Separate struct for constructing toggle actions,
including a boolean to initialize the action state before connecting
signals.
(gtk_action_group_add_toggle_actions):
(gtk_action_group_add_toggle_actions_full): New functions to construct
toggle actions from an array of GtkToggleActionEntries.
* demos/gtk-demo/appwindow.c:
* tests/testactions.c:
* tests/testmerge.c: Adjust to new action group API.
* gtk/gtk-sections.txt: Add gtk_action_group_add_toggle_actions[_full].
2003-09-04 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c: Test buttons and toggle buttons as proxies.
* gtk/gtktoggleaction.c (connect_proxy):
(gtk_toggle_action_real_toggled): Support toggle buttons as proxies. Note
that a "draw_as_radio" property is needed for check buttons similar to
check menu items, in order to fully support button proxies for radio actions.
* gtk/gtkaction.c (connect_proxy): Allow buttons as proxies.
2003-09-04 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c (toggle_dynamic): Test gtk_ui_manager_add_ui().
* gtk/gtkuimanager.h: Add GtkUIManagerItemType enum which is needed for the
'type' argument of gtk_ui_manager_add_ui().
* gtk/gtkuimanager.[hc] (gtk_ui_manager_add_ui): Add 'type' and 'top' arguments
to make this function as powerful as the XML methods of adding UI. (#120647)
* gtk/gtk-sections.txt: Add GtkUIManagerItemType.
2003-08-30 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c (add_widget): Connect to "destroy" on toolbar,
rather than to "remove" on handlebox.
* gtk/gtkuimanager.[hc] (gtk_ui_manager_activate): New method to
activate an action found by following a path. (#120658)
* tests/testmerge.c: Add a button to test gtk_ui_manager_activate().
2003-08-30 Matthias Clasen <maclas@gmx.de>
* gtk/gtkuimanager.[hc]: Add a boolean property, "add_tearoffs" with
setter and getter. If it is set, add tearoff menu items to regular
menus, but not to popups.
* tests/testmerge.c: Add button to test the generation of tearoff
menu items.
2003-08-28 Matthias Clasen <maclas@gmx.de>
* gtk/gtkuimanager.c: Change the XML format:
<Root> element is replaced by <ui>,
<menu> element is replaced by <menubar>,
<submenu> element is replaced by <menu>,
<dockitem> element is replaced by <toolbar>,
<popups> element is gone,
verb attribute is replaced by action,
name defaults to action or the element name.
* gtk/gtkactiongroup.[hc]: Replace GtkActionGroupEntry by GtkActionEntry
and GtkRadioActionEntry. GtkActionEntry is simplified by removing
the user_data, entry_type and extra_data fields, GtkRadioActionEntry is
further simplified by removing the callback. The user_data can now be
specified as an argument to gtk_action_group_add_actions(). There is
a new method gtk_action_group_add_radio_actions(), which is similar
to gtk_action_group_add_actions(), but takes GtkRadioActionEntrys
and a callback parameter in addition to the user_data. The callback
is connected to the ::changed signal of the first group member.
There are _full() variants taking a GDestroyNotify of
gtk_action_group_add_[radio_]actions().
* gtk/gtkradioaction.[hc]: Add a ::changed signal which gets emitted
on every member of the radio group when the active member is changed.
Add an integer property "value", and a getter for the value of "value"
on the currently active group member.
* tests/testactions.c:
* tests/testmerge.c:
* tests/merge-[123].ui:
* demos/gtk-demo/appwindow.c: Adjust to these changes.
* gtk/gtktoolbar.c (gtk_toolbar_append_element): Trivial doc fix.
2003-08-24 Matthias Clasen <maclas@gmx.de>
* gtk/gtkaction.[ch]:
* gtk/gtktoggleaction.[ch]:
* gtk/gtktoggleactionprivate.h:
* gtk/gtkradioaction.[ch]:
* gtk/gtkactiongroup.[ch]:
* gtk/gtkmenumerge.[ch]: A model-view separation for menus and
toolbars, using the EggMenu code by James Henstridge.
* gtk/gtk.h: Include new headers.
* gtk/Makefile.am: Add new files.
* tests/testactions.c: Test for actions.
* tests/testmerge.c: Test for menu merging.
* tests/merge-[123].ui: Test data for testmerge.
* tests/Makefile.am: Add testactions and testmerge.
* demos/gtk-demo/appwindow.c: Use GtkMenuMerge to construct the
menubar and toolbar.
