This shows what one currently has to do manually to get the typical
selection mode with blue headerbar and checkboxes in list rows.
The goal is to make this easier.
This test demonstrates that various deprecated ways
to construct buttons and menuitems still work as they
are supposed to, including always-show-image functionality.
GtkFlowBox is a container that its children in a reflowing
grid, which can be oriented horizontally or vertically.
It is similar to GtkListBox in that the children can
be sorted and filtered, and by requiring a dedicated child
widget type, GtkFlowBoxChild. It is similar to GtkTreeView
in that is supports a full set of selection modes, including
rubberband selection.
This is the culmination of work that has happened in the
egg-list-box module, and earlier in libegg. The origins of
this code are the EggSpreadTable in libegg, which was written
by Tristan van Berkom. It was moved to egg-list-box and
renamed EggFlowBox by Jon McCann, and I gave it some finishing
touched in the flowbox-improvements branch of that module.
Add separate GtkStack and GtkStackSwitcher widgets that are an
alternative to GtkNotebook. Additionally, GtkStack supports
animated transitions when changing pages.
These widgets were initially developed in libgd.
Add a test case that simulates the timing operaton that goes on
when showing a constant frame rate stream like a video - each
frame is shown at the VBlank interval that is closest to when it
would ideally be timed.
https://bugzilla.gnome.org/show_bug.cgi?id=685460
Show the average and standard deviation of the latency in addition to
the frame rate. Add options to print the output in machine-readable form,
and to control the frequency and total number of statistics that will be
output.
https://bugzilla.gnome.org/show_bug.cgi?id=685460
When we have pending motion events, instead of delivering them
directly, request the new FLUSH_EVENTS phase of the frame clock.
This allows us to compress repeated motion events sent to the
same window.
In the FLUSH_EVENTS phase, which occur at priority GDK_PRIORITY_EVENTS + 1,
we deliver any pending motion events then turn off event delivery
until the end of the next frame. Turning off event delivery means
that we'll reliably paint the compressed motion events even if more
have arrived.
Add a motion-compression test case which demonstrates behavior when
an application takes too long handle motion events. It is unusable
without this patch but behaves fine with the patch.
https://bugzilla.gnome.org/show_bug.cgi?id=685460
Add a test of a window with an animated size and contents. The
test accepts load factor command line argument to see how things
work as the drawing of the content requires more GPU resources.
https://bugzilla.gnome.org/show_bug.cgi?id=685460
As used in Totem and gnome-contacts. The widget
takes either a GtkMenu or a GMenuModel to construct
its menu, and can be given a parent widget to use to
position the drop-down (as used in GtkMenuToolButton).
https://bugzilla.gnome.org/show_bug.cgi?id=668013
As used in Totem and gnome-contacts. The widget
takes either a GtkMenu or a GMenuModel to construct
its menu, and can be given a parent widget to use to
position the drop-down (as used in GtkMenuToolButton).
https://bugzilla.gnome.org/show_bug.cgi?id=668013
This is useful to sketch out in GtkBuilder widgets in different states
all at once, so that we can check theming is right for them.
Add some initial UI files for primary-toolbar and inline-toolbar widgets.
Instead of undefining the DISABLE_DEPRECATED guards,
define the GDK_DISABLE_DEPRECATION_WARNING macro where needed.
Also replace INCLUDES by AM_CPPFLAGS to shut up automake.
The tool works like this:
./accessibility-dump [FILE ...]
If no files are given, all files with the extension ".ui" in the current
directory are taken. For every file "test.ui", the following steps are
performed:
1) test.ui is loaded using GtkBuilder
2) The accessible for the window is loaded
3) The information of accessible is converted into a string using a
syntax defined in this test file
4) The generated string is diffed with the file "test.txt"
5) If the diff is empty, the test is a success, if not, the test fails.
6) The diff is output when the test runner is run with --verbose
So to add a test named "test", create a file called "test.ui", put it
into this directory. Then create the expected output file "test.txt",
put it into this directory too. You can create the initial version of
this file by invoking "./accessibility-dump --verbose test.ui". The
output will contain the expected text and can be copy/pasted into the
text file.
Tests in the parser need 1 or 2 files:
1) test.css
2) test.ref.css (optional, defaults to test.css)
The test instantiates a CSS provider, loads test.css, then dumps the
loaded file to test.out.css and then checks that that file matches
test.ref.css. If not, it dumps a diff between those two to the log and
fails.
You want to run the test with --verbose to get the output dumped to
stdout.
This is a special-purpose button that can be used together with
GPermission objects to control the sensitivity of system settings.
Suitable permission objects can e.g. be obtained from PolicyKit.
http://bugzilla.gnome.org/show_bug.cgi?id=626457
This now allows text view to render text with alpha values in
the text foreground and backgrounds, the work is almost complete,
currently the error-underline-color is still a GdkColor style property
and since we use only GdkRGBA for rendering it needs to be converted
and applied, probably a new rgba version of the style property should
also be introduced.
This commit adds tests/testtextview that must be run from the tests/
directory to show translucent text in action.
Add a new test runner supposed to do a lot of generic tests. Run it like
this:
./gtk-reftest [OPTIONS] TESTFILE [TESTFILES...]
where FILE is a GtkBuilder ui file to run.
For a general test named "test", you want to have the following files:
1) test.ui
2) test.ref.ui
3) test.css (optional)
The test will then check that test.ui and test.ref.ui are rendered
identically with the provided css.
In detail, for every provided TESTFILE the test runner will:
1) Add the css to the default screen
2) Load the test.ui file and the test.ref.ui file
3) Grab the first GtkWindow subclass widget
4) gtk_widget_show() it and take a snapshot image of its contents into
a cairo surface.
5) Compare the two images to be bitwise identical. If they are not, a
diff image will be created hilighting the differences.
6) Save the images as png files to the output directory named:
- test.out.png (rendering of test.ui)
- test.ref.png (rendering of test.ref.ui)
- test.diff.png (optional, differences from step 5)
7) Fail the test if the two images are not bitwise identical
Credit for the idea of reftests goes to Mozilla and in particular David
Baron. For a larger introduction of why reftests are useful, see
http://weblogs.mozillazine.org/roc/archives/2008/12/reftests.html
At the same time, change the library sonames for -3.0 to just -3.
This is necessary since the 2.99 releases installed libraries like
libgtk-3.0.so.0.9903.0, and we want to prevent the library version
number from jumping back. So 3.0 will have libgtk-3.so.0.0.0.
This is a subclass of GEmblemedIcon that can show a number or
short string as an emblem, overlayed on top of another emblem.
Written by Cosimo Cecchi
https://bugzilla.gnome.org/show_bug.cgi?id=637169
Added GtkTreeMenu class to automatically render
a GtkTreeModel into a GtkMenu hierarchy (will be
used by GtkComboBox for its dropdown menus). Included
an accompanying testcase tests/testtreemenu
This commit does a number of things:
- remove some dead wchar configury from configure.ac and gdkconfig.h
- repurpose gdkconfig.h as header that contains GDK_WINDOWING_foo
macros for each included backend, include it in gdk.h and install
it in $includedir instead of below $libdir
- drop the backend from the library names
- build libgdk-3.0.la as a convenience lib and include it in libgtk-3.0.la
It does not yet enable building multiple backends at the same time.
The GtkSwitch widget is a simple UI control that has two states: on and
off. Toggling between the states is possible by clicking the widget or
by dragging the handle.
https://bugzilla.gnome.org/show_bug.cgi?id=634987
This patch adds the GtkScrollablePolicy type property to GtkScrollable
and implements it in all subclasses. GtkScrolledWindow observes this
property to make a good guess about when to show/hide scrollbars for
height-for-width content.
Most scrollable children do not do height-for-width *yet* but
most certainly will (toolpalette, treeview, iconview, textview
widgets all TODO), for scrollable widgets that do have a minimum
and natural size, it's important for them to observe the state
of this property in order to properly drive the scroll adjustments
according to the desired GtkScrollablePolicy. This patch makes
GtkViewport do this.
Patch also adds tests/testscrolledwindow.c to display the effects
of this property.
There are two colored boxes with toggle buttons nested
inside several GtkBox. Toggling these to expand mode
should automatically propagate expansion up through
the several GtkBox such that resizing the window
results in resizing the colored boxes.
https://bugzilla.gnome.org/show_bug.cgi?id=628902
The geometry widget feature of gtk_window_set_geometry_hints() has
never really worked right because the calculation that GTK+ did to
compute the base size of the window only worked when the geometry
widget had a larger minimum size than anything else in the window.
Setup:
* Move the GtkSizeGroup private functions to a new private header
gtksizegroup-private.h
* Add the possibilty to pass flags to _gtk_size_group_queue_resize(),
with the flag GTK_QUEUE_RESIZE_INVALIDATE_ONLY to suppress adding
the widget's toplevel to the resize queue.
* _gtk_container_resize_invalidate() is added to implement that feature
* _gtk_widget_override_size_request()/_gtk_widget_restore_size_request()
allow temporarily forcing a large minimum size on the geometry
widget without creating resize loops.
GtkWindow:
* Compute the extra width/height around the geometry widget
correctly; print a warning if the computation fails.
* Always make the minimum size at least the natural minimum
size of the toplevel; GTK+ now fails badly with underallocation.
* Always set the base size hint; we were failing to set it
properly when the specified minimum size was overriden, but
it's harmless to always set it.
Tests:
* New test 'testgeometry' that replaces the 'gridded geometry' test
from testgtk. The new test is roughly similar but creates a bunch
of windows showing different possibilities.
* The testgtk test is removed. No need to have both.
https://bugzilla.gnome.org/show_bug.cgi?id=68668
