After the grab is finished, we would expect an enter event, and
GDK updating internally the cursor for that window and device.
This means there is no need at all to store it separately in the
backend.
As a side effect, animated cursors are now also possible on grab
icons.
https://bugzilla.gnome.org/show_bug.cgi?id=735847
Other backends take care of the cairo surface destruction in
GdkWindow::destroy. We must do the same here, or the cairo_surface
and its corresponding wl_buffer are left dangling.
https://bugzilla.gnome.org/show_bug.cgi?id=747295
If the buffer of a cursor is NULL, for example if its an empty cursor,
just set the cursor surface to NULL as well. Not doing this we'll use
uninitialized hotspot coordinates, dimensions and scales.
https://bugzilla.gnome.org/show_bug.cgi?id=758025
This GdkDragContext should be created even if we don't have pointer
capabilities. Make it created on add_seat(), and only set the device
on wl_seat.capabilities, so it can be set to either master pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=741066
We use the high-level gdk_device_get_window_at_position() to figure
out the window, although this one actually tries to find out the
current window under the device coordinates, which might well fall
outside the window, so NULL is returned in those cases.
Fix this by using the lower level _gdk_device_window_at_position()
that will return the toplevel without further lookups, so is more
desirable here.
https://bugzilla.gnome.org/show_bug.cgi?id=758250
Now that we have multiple master pointers, this call may pick the wrong one.
Instead, pick the GdkWaylandDeviceData from the first device, and pick the
master pointer from there.
The common GDK code accounts for "pointer emulating" touch sequences to be
synchronized with the pointer position by the windowing system.
However on Wayland pointer and touch are completely independent, the backend
attempts to implement pointer emulation, but doesn't account for the
possible crossing events happening when the user switches from pointer to
touch or the opposite.
In order to fix this, and to ensure we don't have to interact with the
master pointer (which backs the wl_pointer), separate the touch interface
to have its own master pointer, and ensure crossing events are emitted on
it, so the picture of an "emulated pointer" is complete above the backend.
Inspired in a former patch by Jonny Lamb <jonnylamb@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=750845
We were using that range for the extra buttons after left/right/middle,
while this is harmless for clients not handling extra buttons (we
used to translate those button events into scroll events in x11 anyway)
this will be unexpected for clients that do handle additional mouse
buttons themselves (eg. back/forward buttons present in some mice).
In order to remain compatible with X11, those need to be assigned from
button 8 onwards.
Also, include input.h, and stop using magic numbers here.
https://bugzilla.gnome.org/show_bug.cgi?id=758072
Make sure the wayland backend sets a new geometry when the client
resizes itself, otherwise the compositor won't be notified and may
revert to the old size on state changes.
Thanks to Jasper St. Pierre <jstpierre@mecheye.net> who pointed out the
problem in gtk+.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=755051
If a GtkMenu (or something else that is mapped as a xdg_popup) tries to
use a subsurface window as a parent, it will be terminated by the
compositor due to protocol violation. So to avoid this, if a parent
window is not a xdg_popup or xdg_surface, i.e. a wl_subsurface, then
traverse up the transient parents until we find the right popup parent.
https://bugzilla.gnome.org/show_bug.cgi?id=756780
Tooltips tend to be placed on top of a parent surface with a given
relative coordinate, and without any input focus. So lets map them as
subsurfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=756496
Restructure the mapping procedure so that its known up front what the
expected way mapping is to be done (subsurface, popup or stand alone),
and warn if it fails to actually map in such a way (for example a popup
without a parent or device grab, a tooltip without a parent).
https://bugzilla.gnome.org/show_bug.cgi?id=756496
GDK_NOTIFY_ANCESTOR would happen when the pointer crosses across a direct
parent/child. However nonlinear events are more likely, specially when
the pointer moves across toplevels (either different apps, or menus being
popped up over the pointer position).
This makes popping up comboboxes and other menus that fall over the pointer
position possible. With the previous detail the GtkMenu code misinterpreted
the crossing event, making it think the button release coming right after
should dismiss the popup, which made menus just flash on the screen unless
you kept the button pressed.
If the shared context is in legacy mode, or if the creation of a core
profile context failed, we fall back to an EGL context in compatibility
mode.
Since we're relying on a fairly new EGL implementation for Wayland, we
don't fall back to the older EGL API, and instead we always require the
EGL_KHR_create_context extension.
https://bugzilla.gnome.org/show_bug.cgi?id=756142
keyboard_handle_leave() might be called with a NULL surface resource
(for example if the surface was destroyed after the event was sent). If
so, we should still deal with the keyboard focus lost event, otherwise
we will both leak (the keyboard_focus GdkWindow reference) and miss
stopping the key repeat timer.
https://bugzilla.gnome.org/show_bug.cgi?id=755927
gdk_wayland_device_update_window_cursor() is inconsistently returning
TRUE/FALSE, despite the timeout being always replaced for new cursor
frames. This could end up in these timeouts being "leaked" and running
as long as the window has an animated cursor.
Fix this by making it really sure we return G_SOURCE_REMOVE, although
now we keep track of animation delays, so the timeout will be reused
for constant time animations.
Initially the subsurface will be in synchronized mode and we will leave
it like this until the first time the parent surface has been committed.
The reason for this is because the subsurface position will be applied
as part of the parent surface state, and we need to synchronize the
initial position with the initial frame, so that we don't accidentally
draw the subsurface at the default position (0, 0) which would happen in
desynchronized mode if the subsurface content is committed before the
next parent surface commit.
https://bugzilla.gnome.org/show_bug.cgi?id=754839
If we are using gl for drawing, we don't have a shm surface,
so don't assert that we do. Instead, only call shm-specific
apis when they make sense.
This fixes a crash when showing popovers over a GtkGLArea,
as seen in gdkgears.
https://bugzilla.gnome.org/show_bug.cgi?id=754143
When receiving a selection or when a drag icon enter a window, it was
targeted at a specific window. Lets emit the GDK_OWNER_CHANGE event
only for this window, instead of broadcasting.
Broadcasting has some nasty side effects. For example, if there was n
GdkWindows, and one would for every "owner-change" signal handler
receive n signals about the owner being changed.
An example of where this went a bit out of hand was gnome-terminal,
which added one listener per terminal window. This meant that if
one had m number of terminal windows, each time any one would loose or
gain keyboard focus, O(m^2) owner-change events would be emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=754158
The code in _gdk_wayland_window_dispose was not safe against
being called twice - it would call g_hash_table_destroy twice
on the known_globals hash table, the second time operating on
freed memory. It was also leaking the list of async_roundtrips.
After fixing both of these issues, the displayclose testcase
now works on Wayland.
We call gdk_wayland_window_hide_surface when the window gets
destroyed, and in this case, the frame clock might not exist
anymore.
This was showing up in the displayclose testcase.
While we do not have subwindows in Wayland, we do create an
artificial root window. When the display is closed, the root
window gets destroyed, causing recursing to be true for the
toplevel windows.
As the protocol is still considered unstable (meaning not backward
compatible), we should, as stated in the protocol, only bind the version
advertised is the version we implement.
https://bugzilla.gnome.org/show_bug.cgi?id=753856
Prior to this patch, the ID of the GtkApplication was always used for
clients which were GtkApplications. This would only be guaranteed to be
correct for D-Bus activatable programs. As a result, all
non-D-Bus-activatable applications would set the wrong ID making the
shell unable to find the corresponding .desktop file.
This change makes it so that the GDK backend always uses the name
passed to g_set_prgname, or the default value if not explicitly set, as
this more often corresponds to the .desktop file.
This means that in order to make D-Bus activatable applications set the
correct application ID, they must, for now, manually call
g_set_prgname() with their application ID (basename of the .desktop
file).
If g_get_prgname() returns NULL, fallback to gdk_get_program_class()
even though it will most likely never be correct according to the
xdg_surface.set_app_id specification.
https://bugzilla.gnome.org/show_bug.cgi?id=746435
wl_log() currently logs using G_LOG_LEVEL_ERROR
(which is fatal). The wayland client library doesn't
expect this behavior. It uses wl_log to log recoverable
errors.
This commit changes the log level to G_LOG_LEVEL_DEBUG
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=753635
On wayland, the gestures protocol defines a wl_pointer_gestures global
object, that will match in number with wl_seats, swipe and pinch
interfaces can be obtained from it, which events are translated into
GdkEventTouchpadSwipe/Pinch events.
Only a drag context which was created with 'drag_begin' will be
guaranteed to have a source window at all times. Thus, in finalize we
cannot assume we can retrieve a GdkDisplay from the source_window
pointer since it may be NULL. Though, the display is only needed for
contexts created via 'drag_begin' thus we can retrieve it after
checking that is the case.
https://bugzilla.gnome.org/show_bug.cgi?id=749339
We need to be mapped to have a gtk_surface and thus be able to do
requests on it so we need to save the modal hint and apply it when we
get mapped so that code that sets the hint before showing a window
doesn't get ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=753138
-1 means that we have no specific preference for an initial
fullscreen monitor, and -1 is less than the number of monitors,
so we would end up accessing invalid memory. Prevent that.
https://bugzilla.gnome.org/show_bug.cgi?id=752875
