In the Quartz backend, there are two methods by which windows are
resized. The first method is fully handled by Quartz and does not appear
in the event stream the application resizes. The second method is when
we resize windows by ourselves. In OS X this happens when a GTK+ resize
grip is used. This resize grip is larger than the Quartz resize grip.
When the resize is started outside the "Quartz area", we have to handle
it by ourselves.
This patch fixes this manual window resizing by ignoring events while we
are in the process of resizing (such that the events actually arrive at
the sendEvent handler of GdkQuartzWindow where this resize is handled).
When the resize has finished we break all grabs such that GDK is not
stuck thinking the cursor is still in the resize window.
_gdk_x11_moveresize_configure_done() isn't called for wmspec
moves/resizes so we don't have a way to notice when a wmspec
move/resize ends and consequently untrigger the sending of
_NET_WM_MOVERESIZE_CANCEL which results in this message always being
sent on the next button release event. In that case we are marking
that event as handled so it isn't processed further which breaks
button press/release event handling in several widgets.
To fix this we simply allow the normal event handling machinery to run
after sending the _NET_WM_MOVERESIZE_CANCEL message.
https://bugzilla.gnome.org/show_bug.cgi?id=673328
Since the order in which _NET_WM_STATE and _NET_WM_DESKTOP are set, or
even *if* they are set, isn't defined, we could end up unsetting
GDK_WINDOW_STATE_FOCUSED given that both handlers for these two X
properties end up doing window state changes for all states. As we
want GDK_WINDOW_STATE_FOCUSED to be set by default we need to set its
master flag by default as well.
https://bugzilla.gnome.org/show_bug.cgi?id=673125
We now have a proper MASTER/SLAVE input device split, where
the masters are virtual core input devices and we add fake hw
slave devices for the system pointer and real slave devices for
wintab devices.
We also set the proper source_device on the events so you can
tell which device sent it and properly decode the axis info.
The code for calculating the per-monitor workarea was ignoring
the fact that the EWMH workarea property can only handle rectangular
workareas, and thus can't really do justice to general monitor
arrangements. As a workaround, we ignore it for anything but
the primary monitor. And we ignore it for the primary monitor
as well if it does not even cover it.
https://bugzilla.gnome.org/show_bug.cgi?id=672163
We want to avoid handling focus events for the private focus window,
otherwise the keyboard grab taken by for example buttons will cause a
spurious FOCUS_OUT/FOCUS_IN on the toplevel.
The code that did this seems to have been lost in the XI2 transition for
GTK3.
This patch reapplies db4a6040af which was
backed out in 18406b7b04 to give
developers a chance to get their X servers fixed. As we want to get this
bugfix in for 3.4, we need to commit it now.
https://bugzilla.gnome.org/show_bug.cgi?id=657578
XI2 provides us with an increment for each scroll valuator,
and by dividing the delta by the increment, we obtain normalized
values in some abstract 'scroll unit'.
For mouse wheels, the evdev driver reports an increment of -1,
so doing this division fixes the inverted scrolling with wheels
that we've seen recently.
GtkRange was using GDK_POINTER_MOTION_MASK, and it was not
getting any emulated motion events, because we only translate
from GDK_BUTTON_MOTION_MASK to GDK_POINTER_MOTION_MASK, but not
the other way around, and emulated_mask only had
GDK_BUTTON_MOTION_MASK in it. Now we put GDK_POINTER_MOTION_MASK
in emulated_mask and successfully match for windows that
have GDK_POINTER_MOTION_MASK or any of the button motion masks
selected.
This fixes range sliders not following the finger and jumping
to the last position upon release.
If the Window Manager supports the _NET_WM_STATE_HIDDEN, we use it to use
the _NET_WM_STATE protocol when de-iconifying windows (iconification is
unchanged, via XIconifyWindow). Additionally, we no longer interpret all
UnmapNotify events for our window as the result of iconification.
(Based on patch by Tomas Frydrych <tf@linux.intel.com>)
NSEvent -scrollingDeltaX and -scrollingDeltaY aren't defined before
10.7, so objc assumes that they return a pointer. Trying to cast to a
float generates a compiler error.
XInput >= 2.1 allows for implementing smooth scrolling,
reporting the different scrolling axes as valuators.
Any change in those will be reported as GdkEventScroll
events with delta_x/y information.
the older kind of scroll events is still handled, and
emulated in devices able to provide smooth scrolling,
setting _gdk_event_set_pointer_emulated() in that case.
nsevent scrollingDeltaX/Y (available on OSX >= Lion) is used to
provide the smooth scrolling values. In any case, old fashioned
events are still sent, setting _gdk_event_set_pointer_emulated()
if the event contains both smooth and non-smooth values.
Events of type GDK_SCROLL will be received if the client side window
event mask has either GDK_SCROLL_MASK or GDK_SMOOTH_SCROLL_MASK.
GDK_BUTTON_PRESS_MASK has been removed from type_masks[GDK_SCROLL]
as that bit is often set for other-than-scrolling purposes, and
yet have the window receive scroll events. In GTK+, this forces
non-smooth events bubbling, even if the widgets above want smooth
events, and legitimately set GDK_[SMOOTH_]SCROLL_MASK.
If a device provides both smooth and non-smooth events, the latter will be
flagged with _gdk_event_set_pointer_emulated() so the client side window
receives one or the other. If a device is only able to deliver non-smooth
events, those will be sent, so both direction/deltas may need to be handled.
get_event_window() just checked on GDK_TOUCH_MASK, including for emulated
pointer events, so at the very least those should also match evmasks with
no touch events whatsoever
If an active grab kicks in on a different window, _gdk_display_has_device_grab()
would still find the former implicit grab for the window below the pointer, thus
sending events to an unrelated place.
If a grab with GDK_TOUCH_MASK kicks in due to a touch sequence emulating pointer
events, don't mutate the sequence into emitting touch events right away.
Create the backing GdkTouchGrabInfo for touches even if the pointer
emulating touch sequence is already holding an implicit grab on a
window that didn't select for touch events.
the backing GdkTouchGrabInfo will be needed if the overriding device
grab finishes before the touch does in order to send events back to
the implicit grab window. Instead, wait until the touch is physically
finished before removing the matching GdkTouchGrabInfo
GDK will only receive touch events when dealing with a multitouch
device, so these must be transformed to pointer events if the
client-side window receiving the event doesn't listen to touch
events, and the touch sequence the event is from does emulate
the pointer.
If a sequence emulates pointer events, it will result in a
button-press, N motions with GDK_BUTTON1_MASK set and a
button-release event, and it will deliver crossing events
as specified by the current device grab.
These are equivalent to an implicit grab (with !owner_events), so
if the touch leaves or enters the grab window, the other window
won't receive the corresponding counter-event.
If the touch sequence happens on a window with GDK_TOUCH_MASK set,
a GdkTouchGrabInfo is created to back it up. Else a device grab is
only created if the sequence emulates the pointer.
If both a device and a touch grab are present on a window, the later
of them both is obeyed, Any grab on the device happening after a
touch grab generates grab-broken on all the windows an implicit
touch grab was going on.
Anytime a touch device interacts, the crossing events generation
will change to a touch mode where only events with mode
GDK_CROSSING_TOUCH_BEGIN/END are handled, and those are sent
around touch begin/end. Those are virtual as the master
device may still stay on the window.
Whenever there is a switch of slave device (the user starts
using another non-touch device), a crossing event with mode
GDK_CROSSING_DEVICE_SWITCH may generated if needed, and the normal
crossing event handling is resumed.
Translate XI_TouchBegin/Update/End to GDK_TOUCH_BEGIN/UPDATE/END
events.
At the same time,
set pointer-emulated flags on button events with XIPointerEmulated
and on touch events emulating the pointer.
This commit introduces GDK_TOUCH_BEGIN/UPDATE/END/CANCEL
and a separate GdkEventTouch struct that they use. This
is closer to the touch event API of other platforms and
matches the xi2 events closely, too.
We introduce GDK_SOURCE_TOUCHSCREEN and GDK_SOURCE_TOUCHPAD
for direct and indirect touch devices, respecively. These
correspond to XIDirectTouch and XIDependentTouch in XI2.
My previous fix for this broke the progress bar in epiphany. This fix
makes it work again, and keeps the gimp bug fixed.
Basically, whenever we do a non-double-buffered rendering we have to
flush the entire window as it might be drawn outside the double
buffering machinery.
Once we've made them popup windows we must also implement the popup_done event
handler on the shell surface listener. The best we can currently do is to hide
the window. This will then signal up to GTK which could then deactivate the
appropriate menu (see https://bugzilla.gnome.org/show_bug.cgi?id=670881)
This allows us to get the device if we need to make the window a popup. This
relies on the side effect that GTK calls into GDK to take a grab before the
popup window is shown.
Since it's generated, we install the header by putting it into
gdkinclude_HEADERS, so it's wrong to put it again into
gdk_public_h_sources.
This fixes the build.
This patch changes all uses of GDK_DEPRECATED(_FOR) in gdk headers
by the versioned variants, GDK_DEPRECATED_IN_3_x(_FOR). At the same
time, we add GDK_AVAILABLE_IN_3_x annotations for all API additions
in 3.2 and 3.4.
These macros follow the recent changes in GLibs deprecation
setup. We now annotate deprecated functions with the version
they were deprecated in, and you can define the macro
GDK_VERSION_MIN_REQUIRED to cut off deprecation warnings for
'recent' deprecations.
At the same time, we introduce version annotations for new API
and allow you to avoid 'recent' API additions by defining
GDK_VERSION_MAX_ALLOWED.
This last slave device (stored per master) is used to fill
in the missing slave device in synthesized crossing events
that are not directly caused by a device event (ie due to
configure events or grabs).
The F keys have no unicode mapping, and UCKeyTranslate() returns
a bogus 0x10 as mapping to unicode. Instead of checking for this
random and undocumented return value, simply assign all function
keys explicitly. This patch also splits the ill-named "known_keys"
array into "modifier_keys" and "function_keys" which is much
more obvious.
(cherry picked from commit 55f9e5cbaf)
Move g_return_if_fail() stuff from the backends to the public
functions in gdkscreen.c itself, and some fixes for ugly formatting in
the various gdkscreen-backend.c files.
