Without a way to create events, there is no point
in allowing gdk_display_put_event to be used from
the outside. And little good can come out of using
the other apis, so just make them all private.
A call to frame gdk_frame_clock_get_frame_time() outside of the paint
cycle could report an un-error-corrected frame time, and later a
corrected value could be earlier than the previously reported value.
We now always store the latest reported time so we can ensure
monotonicity.
In commit c6901a8b, the frame clock reported time was changed from
simply reporting the time we ran the frame clock cycle to reporting a
smoothed value that increased by the frame interval each time it was
called.
However, this change caused some problems, such as:
https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/1415https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/1416https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/1482
I think a lot of this is caused by the fact that we just overwrote the
old frame time with the smoothed, monotonous timestamp, breaking
some things that relied on knowing the actual time something happened.
This is a new approach to doing the smoothing that is more explicit.
The "frame_time" we store is the actual time we ran the update cycle,
and then we separately compute and store the derived smoothed time and
its period, allowing us to easily return a smoothed time at any time
by rounding the time difference to an integer number of frames.
The initial frame_time can be somewhat arbitrary, as it depends on the
first cycle which is not driven by the frame clock. But follow-up
cycles are typically tied to the the compositor sending the drawn
signal. It may happen that the initial frame is exactly in the middle
between two frames where jitter causes us to randomly round in
different directions when rounding to nearest frame. To fix this we
additionally do a quadratic convergence towards the "real" time,
during presentation driven clock cycles (i.e. when the frame times are
small).
On my X11 + nvidia setup gnome-shell doesn't report presentation times.
However it does report refresh rate. We were mostly using this in our
calculation except when computing predicted presentation time, were
it fell back on the default 60Hz.
Don't call into the backends when the input region
or shadow width don't actually change. This avoid
distracting calls in debug logs, and just generally
is the right thing to do.
This is not used anymore now that surfaces are always toplevel in the
semantics of GdkWindow where child windows were available. We can drop
that and simplify the vfunc just a bit more.
Fixes#2765
On X11, shortcuts inhibition is emulated using a grab on the keyboard.
So if another widget ungrabs the keyboard behind our back (for example
when a popup window is dismissed) that effectively disables the effects
of the shortcut inhibition on the surface and we need to update the
shortcut inhibition status accordingly.
Check for "grab-broken" events on the surface and clear existing
shortcuts inhibition for the matching seat, so that the client can be
notified and may decide to re-enable shortcut inhibition if desired.
We pass the GdkEvent as a pointer, because the autogenerated marshallers
don't know how to handle GTypeInstance-derived classes.
Since the GValue box that we use in the marshaller passes the GdkEvent
instance as is, we also need to acquire a reference before invoking the
closure, and release it afterwards, to ensure that the GdkEvent instance
survices the invocation.
Just because we take a ref on a surface does not
guarantee that it is still usable a second later.
Check if its been destroyed in the meantime.
This is breaking the template tests in ci, since
there is no client behind the Broadway server.
The assumption is that the source device in events
is a slave device, so create pointer and keyboard
devices and use them in events.
This fixes the seat test on Broadway.
GDK backends are expected to keep a references on
their surfaces as long as they are associated with
external resources, and drop it in destroy().
This showed up as criticals in the shortcuts test
which manually creates and destroys surfaces.
If the tablet gets removed/freed while there are pad events in flight,
we leave a dangling pointer from the pad to the tablet, which may
lead to invalid reads/writes when handling the pad event(s).
If you run weston with the headless backend, you get a Wayland
display with no seat, which is just fine by the protocol.
gdk_display_get_default_seat() returns NULL in this case. Various
widgets assume that we always have a seat with a keyboard and a
pointer, since that is what X guarantees. Make things survive
without that, so we can run the testsuite under a headless
Wayland compositor.
In the gtk-demo drag-and-drop demo i can't drag anything, all I get
is:
(gtk4-demo:358993): Gdk-CRITICAL **: 09:36:19.617: Surface 0x7e1bb0 has not been mapped in GdkSeatGrabPrepareFunc
This is because GdkX11Drag.ipc_surface is not considered mapped, even
though we called gdk_x11_surface_show() on it, because the
GDK_SURFACE_STATE_WITHDRAWN flag is still set.
I added calls to gdk_synthesize_surface_state() to match what
e.g. show_popup() and gdk_x11_toplevel_present() does.
Tracking of those broke sometime along the gdk cleanups, so we
started missing some GDK_GRAB_BROKEN events from being emitted
(eg. after a button press/implicit grab triggers an active grab).
Implicit grabs are only added if there's no prior grab (either
implicit through other button presses, or explicit), in order to
keep accounting correct, make those prevail.
Conditionally check whether the Vulkan headers version defines
VK_RESULT_RANGE_SIZE, and avoid using it for version >=140. The
following comming in Vulkan-Headers has removed the enum value:
0c5351f5e9 (diff-4febd94c0666d59030d8b1dd20c72403)
When I removed the 0-termination for the entries for
each keyval, I remove the code initializing the key,
but accidentally left the code that adds it to the
array, so gdk_keymap_get_cached_entries_for_keyval
returns one extra, uninitialized value at the end
of the array. Stop doing that.
We currently calling gdk_display_map_keyval up to
once per key event per shortcut trigger, and that function
does an expensive loop over the entire keymap and
allocates an array. Avoid this by caching the entries
in a single array, and have a lookup table for finding
the entries for a keyval.
To do this, change the GdkKeymap.get_entries_for_keyval
signature, and change the ::keys-changed signal to be
RUN_FIRST, since we want to clear the cache in the class
handler before running signal handlers. These changes are
possible now, since keymaps are no longer public API.
In the absence of icon themes (such as in a freshly
created toolbox container), we should not just fall back
to "no cursor", since that makes it hard even to close
the application. Fall back to an included default cursor
of last resort.
Provide a fallback cursor of last resort. Otherwise,
we end up with no visible cursor if there is no
cursor theme installed, wihch is less than helpful.
If the wl_surface receiving touch events is destroyed, we will get no
wl_touch.up event to remove the touchpoint from our internal accounting.
Check for this, and drop touchpoints happening in surfaces that do
disappear during operation.
The api to configure surfaces is now GdkToplevelLayout
and GdkPopupLayout. Unfortunately, there's still quite
a bit of internal use of GdkGeometry that will take some
time to clean up, so move it go gdkinternals.h for now.
The api to configure surfaces is now GdkToplevelLayout
and GdkPopupLayout. Unfortunately, there's still quite
a bit of internal use of GdkGeometry that will take some
time to clean up, so move it go gdkinternals.h for now.
We don't create a grabbing popup if it's not the top most one, as that
is a protocol violation, and complain if anything attempts to do it.
What we didn't do is handle this gracefully in the code that tries to
create said popup.
Fix this by dropping the attempt to show the popup on the floor, instead
of setting various state making it look like it succeeded. This won't
actually fix anything, but it'll result in a bit more accurate warnings
logged, as the state more correctly corresponds to the reality.
When we autohide a popup surface with a grab, hide all other auto hiding
popups up the popup chain. The end result is that when you click outside
a menu with submenus open, the whole menu chain is dismissed.
GdkEvent has been a "I-can't-believe-this-is-not-OOP" type for ages,
using a union of sub-types. This has always been problematic when it
comes to implementing accessor functions: either you get generic API
that takes a GdkEvent and uses a massive switch() to determine which
event types have the data you're looking for; or you create namespaced
accessors, but break language bindings horribly, as boxed types cannot
have derived types.
The recent conversion of GskRenderNode (which had similar issues) to
GTypeInstance, and the fact that GdkEvent is now a completely opaque
type, provide us with the chance of moving GdkEvent to GTypeInstance,
and have sub-types for GdkEvent.
The change from boxed type to GTypeInstance is pretty small, all things
considered, but ends up cascading to a larger commit, as we still have
backends and code in GTK trying to access GdkEvent structures directly.
Additionally, the naming of the public getter functions requires
renaming all the data structures to conform to the namespace/type-name
pattern.
For the X11 backend, keep a list of monitors for which the surface
intersects the monitor area.
Whenever the X11 surface is configured, check against the list of
monitors to determine whether it enters a new monitor or if it left a
monitor, to emit the corresponding ::enter/leave-monitor signals just
like a Wayland compositor would.
As monitors can be added, removed or reconfigured at any time, redo
those checks whenever any of these events occur.
Stop rewriting key and focus events on the GDK side.
Instead deliver them as they are, and propagate them
from the root on the gtk side, in gtkmain.c. And
stop complaining about focus events on popups - we
can just ignore them if we have no use for them.
