## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- ## Copyright (C) 1996-1998 Free Software Foundation, Inc. ## Gordon Matzigkeit , 1996 ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. # serial 29 AM_PROG_LIBTOOL AC_DEFUN(AM_PROG_LIBTOOL, [AC_REQUIRE([AM_ENABLE_SHARED])dnl AC_REQUIRE([AM_ENABLE_STATIC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AM_PROG_LD])dnl AC_REQUIRE([AM_PROG_NM])dnl AC_REQUIRE([AM_SYS_NM_PARSE])dnl AC_REQUIRE([AM_SYS_SYMBOL_UNDERSCORE])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Check for any special flags to pass to ltconfig. libtool_flags= test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" # Some flags need to be propagated to the compiler or linker for good # libtool support. case "$host" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*-cygwin32*) AM_SYS_LIBTOOL_CYGWIN32 ;; esac # enable the --disable-libtool-lock switch AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock force libtool not to do file locking], need_locks=$enableval, need_locks=yes) if test x"$need_locks" = xno; then libtool_flags="$libtool_flags --disable-lock" fi # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ DLLTOOL="$DLLTOOL" AS="$AS" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) # AM_ENABLE_SHARED - implement the --enable-shared flag # Usage: AM_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AM_ENABLE_SHARED, [define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl ]) # AM_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN(AM_DISABLE_SHARED, [AM_ENABLE_SHARED(no)]) # AM_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN(AM_DISABLE_STATIC, [AM_ENABLE_STATIC(no)]) # AM_ENABLE_STATIC - implement the --enable-static flag # Usage: AM_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AM_ENABLE_STATIC, [define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AM_ENABLE_STATIC_DEFAULT)dnl ]) # AM_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN(AM_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. changequote(,)dnl /* | [A-Za-z]:/*) # Canonicalize the path of ld re_direlt='/[^/][^/]*/\.\./' sub_uncdrive='s%^\([A-Za-z]\):/%//\1/%' changequote([,])dnl while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done case "$host_os" in cygwin*) # Convert to a UNC path for cygwin test -z "$LD" && LD=`echo X$ac_prog | $Xsed -e "$sub_uncdrive"` ;; *) test -z "$LD" && LD="$ac_prog" ;; esac ;; ## ## FIXME: The code fails later on if we try to use an $LD with ## '\\' path separators. ## changequote(,)dnl [A-Za-z]:[\\]*) # Canonicalize the path of ld re_direlt='\\[^\\][^\\]*\\\.\.\(\\\)' sub_uncdrive='s%^\([A-Za-z]\):\\%//\1/%' changequote([,])dnl sub_uncdir='s%\\%/%g' while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%\1%"` done case "$host_os" in cygwin*) # Convert to a UNC path for cygwin test -z "$LD" && LD=`echo X$ac_prog | sed -e 's%^X%%' -e "$sub_uncdrive" -e "$sub_uncdir"` ;; *) test -z "$LD" && LD="$ac_prog" ;; esac ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(ac_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else ac_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$ac_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_SUBST(LD) AM_PROG_LD_GNU ]) AC_DEFUN(AM_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then ac_cv_prog_gnu_ld=yes else ac_cv_prog_gnu_ld=no fi]) ]) # AM_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN(AM_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -B" elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -p" else ac_cv_path_NM="$ac_dir/nm" fi break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) # AM_SYS_NM_PARSE - Check for command ro grab the raw symbol name followed # by C symbol name from nm. AC_DEFUN(AM_SYS_NM_PARSE, [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AM_PROG_NM])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output]) AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe, [# These are sane defaults that work on at least a few old systems. # {They come from Ultrix. What could be older than Ultrix?!! ;)} changequote(,)dnl # Character class describing NM global symbol codes. ac_symcode='[BCDEGRSTU]' # Regexp to match symbols that can be accessed directly from C. ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform the above into a raw symbol and a C symbol. ac_symxfrm='\1 \1' # Define system-specific variables. case "$host_os" in aix*) ac_symcode='[BCDTU]' ;; sunos* | cygwin32* | mingw32*) ac_sympat='_\([_A-Za-z][_A-Za-z0-9]*\)' ac_symxfrm='_\1 \1' ;; irix*) # Cannot use undefined symbols on IRIX because inlined functions mess us up. ac_symcode='[BCDEGRST]' ;; solaris*) ac_symcode='[BDTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then ac_symcode='[ABCDGISTUW]' fi case "$host_os" in cygwin32* | mingw32*) # We do not want undefined symbols on cygwin32. The user must # arrange to define them via -l arguments. ac_symcode='[ABCDGISTW]' ;; esac changequote([,])dnl # Write the raw and C identifiers. ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* $ac_symcode $ac_sympat$/$ac_symxfrm/p'" # Check to see that the pipe works correctly. ac_pipe_works=no cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then # Try sorting and uniquifying the output. if sort "$ac_nlist" | uniq > "$ac_nlist"T; then mv -f "$ac_nlist"T "$ac_nlist" ac_wcout=`wc "$ac_nlist" 2>/dev/null` changequote(,)dnl ac_count=`echo "X$ac_wcout" | sed -e 's,^X,,' -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` changequote([,])dnl (test "$ac_count" -ge 0) 2>/dev/null || ac_count=-1 else rm -f "$ac_nlist"T ac_count=-1 fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then cat < conftest.c #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. sed 's/^.* \(.*\)$/extern char \1;/' < "$ac_nlist" >> conftest.c cat <> conftest.c #if defined (__STDC__) && __STDC__ # define __ptr_t void * #else # define __ptr_t char * #endif /* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ int dld_preloaded_symbol_count = $ac_count; /* The mapping between symbol names and symbols. */ struct { char *name; __ptr_t address; } changequote(,)dnl dld_preloaded_symbols[] = changequote([,])dnl { EOF sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c cat <<\EOF >> conftest.c {0, (__ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftestm.$ac_objext ac_save_LIBS="$LIBS" ac_save_CFLAGS="$CFLAGS" LIBS="conftestm.$ac_objext" CFLAGS="$CFLAGS$no_builtin_flag" if AC_TRY_EVAL(ac_link) && test -s conftest; then ac_pipe_works=yes else echo "configure: failed program was:" >&AC_FD_CC cat conftest.c >&AC_FD_CC fi LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" else echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC fi else echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC fi else echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC fi else echo "$progname: failed program was:" >&AC_FD_CC cat conftest.c >&AC_FD_CC fi rm -rf conftest* # Do not use the global_symbol_pipe unless it works. test "$ac_pipe_works" = yes || ac_cv_sys_global_symbol_pipe= ]) ac_result=yes if test -z "$ac_cv_sys_global_symbol_pipe"; then ac_result=no fi AC_MSG_RESULT($ac_result) ]) # AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32 AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32, [AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) ]) # AM_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols # with an underscore? AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [AC_REQUIRE([AM_PROG_NM])dnl AC_REQUIRE([AM_SYS_NM_PARSE])dnl AC_MSG_CHECKING([for _ prefix in compiled symbols]) AC_CACHE_VAL(ac_cv_sys_symbol_underscore, [ac_cv_sys_symbol_underscore=no cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then # See whether the symbols have a leading underscore. if egrep '^_nm_test_func' "$ac_nlist" >/dev/null; then ac_cv_sys_symbol_underscore=yes else if egrep '^nm_test_func ' "$ac_nlist" >/dev/null; then : else echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC fi fi else echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC fi else echo "configure: failed program was:" >&AC_FD_CC cat conftest.c >&AC_FD_CC fi rm -rf conftest* ]) AC_MSG_RESULT($ac_cv_sys_symbol_underscore) if test x$ac_cv_sys_symbol_underscore = xyes; then AC_DEFINE(WITH_SYMBOL_UNDERSCORE,1, [define if compiled symbols have a leading underscore]) fi ]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995. # # Modified to never use included libintl. # Owen Taylor , 12/15/1998 # # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. # serial 5 AC_DEFUN(AM_GTK_WITH_NLS, [AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE(nls, [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT($USE_NLS) AC_SUBST(USE_NLS) USE_INCLUDED_LIBINTL=no dnl If we use NLS figure out what method if test "$USE_NLS" = "yes"; then # AC_DEFINE(ENABLE_NLS) # AC_MSG_CHECKING([whether included gettext is requested]) # AC_ARG_WITH(included-gettext, # [ --with-included-gettext use the GNU gettext library included here], # nls_cv_force_use_gnu_gettext=$withval, # nls_cv_force_use_gnu_gettext=no) # AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) nls_cv_force_use_gnu_gettext="no" nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then dnl User does not insist on using GNU NLS library. Figure out what dnl to use. If gettext or catgets are available (in this order) we dnl use this. Else we have to fall back to GNU NLS library. dnl catgets is only used if permitted by option --with-catgets. nls_cv_header_intl= nls_cv_header_libgt= CATOBJEXT=NONE AC_CHECK_HEADER(libintl.h, [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc, [AC_TRY_LINK([#include ], [return (int) gettext ("")], gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)]) if test "$gt_cv_func_gettext_libc" != "yes"; then AC_CHECK_LIB(intl, bindtextdomain, [AC_CACHE_CHECK([for gettext in libintl], gt_cv_func_gettext_libintl, [AC_CHECK_LIB(intl, gettext, gt_cv_func_gettext_libintl=yes, gt_cv_func_gettext_libintl=no)], gt_cv_func_gettext_libintl=no)]) fi if test "$gt_cv_func_gettext_libc" = "yes" \ || test "$gt_cv_func_gettext_libintl" = "yes"; then AC_DEFINE(HAVE_GETTEXT) AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl if test "$MSGFMT" != "no"; then AC_CHECK_FUNCS(dcgettext) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr], [CATOBJEXT=.gmo DATADIRNAME=share], [CATOBJEXT=.mo DATADIRNAME=lib]) INSTOBJEXT=.mo fi fi # Added by Martin Baulig 12/15/98 for libc5 systems if test "$gt_cv_func_gettext_libc" != "yes" \ && test "$gt_cv_func_gettext_libintl" = "yes"; then INTLLIBS=-lintl LIBS=`echo $LIBS | sed -e 's/-lintl//'` fi ]) if test "$CATOBJEXT" = "NONE"; then AC_MSG_CHECKING([whether catgets can be used]) AC_ARG_WITH(catgets, [ --with-catgets use catgets functions if available], nls_cv_use_catgets=$withval, nls_cv_use_catgets=no) AC_MSG_RESULT($nls_cv_use_catgets) if test "$nls_cv_use_catgets" = "yes"; then dnl No gettext in C library. Try catgets next. AC_CHECK_LIB(i, main) AC_CHECK_FUNC(catgets, [AC_DEFINE(HAVE_CATGETS) INTLOBJS="\$(CATOBJS)" AC_PATH_PROG(GENCAT, gencat, no)dnl # if test "$GENCAT" != "no"; then # AC_PATH_PROG(GMSGFMT, gmsgfmt, no) # if test "$GMSGFMT" = "no"; then # AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt, # [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no) # fi # AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, # [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) # USE_INCLUDED_LIBINTL=yes # CATOBJEXT=.cat # INSTOBJEXT=.cat # DATADIRNAME=lib # INTLDEPS='$(top_builddir)/intl/libintl.a' # INTLLIBS=$INTLDEPS # LIBS=`echo $LIBS | sed -e 's/-lintl//'` # nls_cv_header_intl=intl/libintl.h # nls_cv_header_libgt=intl/libgettext.h # fi ]) fi fi if test "$CATOBJEXT" = "NONE"; then dnl Neither gettext nor catgets in included in the C library. dnl Fall back on GNU gettext library. nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" != "yes"; then AC_DEFINE(ENABLE_NLS) else # Unset this variable since we use the non-zero value as a flag. CATOBJEXT= # dnl Mark actions used to generate GNU NLS library. # INTLOBJS="\$(GETTOBJS)" # AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, # [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt) # AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) # AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, # [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) # AC_SUBST(MSGFMT) # USE_INCLUDED_LIBINTL=yes # CATOBJEXT=.gmo # INSTOBJEXT=.mo # DATADIRNAME=share # INTLDEPS='$(top_builddir)/intl/libintl.a' # INTLLIBS=$INTLDEPS # LIBS=`echo $LIBS | sed -e 's/-lintl//'` # nls_cv_header_intl=intl/libintl.h # nls_cv_header_libgt=intl/libgettext.h fi dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is no GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext program is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po else DATADIRNAME=share nls_cv_header_intl=intl/libintl.h nls_cv_header_libgt=intl/libgettext.h fi AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl) AC_OUTPUT_COMMANDS( [case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac]) # # If this is used in GNU gettext we have to set USE_NLS to `yes' # # because some of the sources are only built for this goal. # if test "$PACKAGE" = gettext; then # USE_NLS=yes # USE_INCLUDED_LIBINTL=yes # fi dnl These rules are solely for the distribution goal. While doing this dnl we only have to keep exactly one list of the available catalogs dnl in configure.in. for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done dnl Make all variables we use known to autoconf. AC_SUBST(USE_INCLUDED_LIBINTL) AC_SUBST(CATALOGS) AC_SUBST(CATOBJEXT) AC_SUBST(DATADIRNAME) AC_SUBST(GMOFILES) AC_SUBST(INSTOBJEXT) AC_SUBST(INTLDEPS) AC_SUBST(INTLLIBS) AC_SUBST(INTLOBJS) AC_SUBST(POFILES) AC_SUBST(POSUB) ]) AC_DEFUN(AM_GTK_GNU_GETTEXT, [AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_ISC_POSIX])dnl AC_REQUIRE([AC_HEADER_STDC])dnl AC_REQUIRE([AC_C_CONST])dnl AC_REQUIRE([AC_C_INLINE])dnl AC_REQUIRE([AC_TYPE_OFF_T])dnl AC_REQUIRE([AC_TYPE_SIZE_T])dnl AC_REQUIRE([AC_FUNC_ALLOCA])dnl AC_REQUIRE([AC_FUNC_MMAP])dnl AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \ unistd.h sys/param.h]) AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ strdup __argz_count __argz_stringify __argz_next]) if test "${ac_cv_func_stpcpy+set}" != "set"; then AC_CHECK_FUNCS(stpcpy) fi if test "${ac_cv_func_stpcpy}" = "yes"; then AC_DEFINE(HAVE_STPCPY) fi AM_LC_MESSAGES AM_GTK_WITH_NLS if test "x$CATOBJEXT" != "x"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; esac done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi dnl The reference to in the installed file dnl must be resolved because we cannot expect the users of this dnl to define HAVE_LOCALE_H. if test $ac_cv_header_locale_h = yes; then INCLUDE_LOCALE_H="#include " else INCLUDE_LOCALE_H="\ /* The system does not provide the header . Take care yourself. */" fi AC_SUBST(INCLUDE_LOCALE_H) dnl Determine which catalog format we have (if any is needed) dnl For now we know about two different formats: dnl Linux libc-5 and the normal X/Open format test -d intl || mkdir intl if test "$CATOBJEXT" = ".cat"; then AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen) dnl Transform the SED scripts while copying because some dumb SEDs dnl cannot handle comments. sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed fi dnl po2tbl.sed is always needed. sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed dnl In the intl/Makefile.in we have a special dependency which makes dnl only sense for gettext. We comment this out for non-gettext dnl packages. if test "$PACKAGE" = "gettext"; then GT_NO="#NO#" GT_YES= else GT_NO= GT_YES="#YES#" fi AC_SUBST(GT_NO) AC_SUBST(GT_YES) dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly dnl find the mkinstalldirs script in another subdir but ($top_srcdir). dnl Try to locate is. MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi AC_SUBST(MKINSTALLDIRS) dnl *** For now the libtool support in intl/Makefile is not for real. l= AC_SUBST(l) dnl Generate list of files to be processed by xgettext which will dnl be included in po/Makefile. test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES ])